11969d698f
5470 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Sudeep Holla
|
11969d698f |
cacheinfo: Use atomic allocation for percpu cache attributes
On couple of architectures like RISC-V and ARM64, we need to detect cache attribues quite early during the boot when the secondary CPUs start. So we will call detect_cache_attributes in the atomic context and since use of normal allocation can sleep, we will end up getting "sleeping in the atomic context" bug splat. In order avoid that, move the allocation to use atomic version in preparation to move the actual detection of cache attributes in the CPU hotplug path which is atomic. Cc: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20220720-arch_topo_fixes-v3-1-43d696288e84@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Phil Auld
|
7ee951acd3 |
drivers/base: fix userspace break from using bin_attributes for cpumap and cpulist
Using bin_attributes with a 0 size causes fstat and friends to return that 0 size. This breaks userspace code that retrieves the size before reading the file. Rather than reverting |
||
Greg Kroah-Hartman
|
2c8f7ef4b3 |
cacheinfo and arch_topology updates for v5.20
These are updates to fix some discrepancies we have in the CPU topology
parsing from the device tree /cpu-map node and the divergence from the
behaviour on a ACPI enabled platform. The expectation is that both DT
and ACPI enabled systems must present consistent view of the CPU topology.
The current assignment of generated cluster count as the physical package
identifier for each CPU is wrong. The device tree bindings for CPU
topology supports sockets to infer the socket or physical package
identifier for a given CPU. It is now being made use of you address the
issue. These updates also assigns the cluster identifier as parsed from
the device tree cluster nodes within /cpu-map without support for
nesting of the clusters as there are no such reported/known platforms.
In order to be on par with ACPI PPTT physical package/socket support,
these updates also include support for socket nodes in /cpu-map.
The only exception is that the last level cache id information can be
inferred from the same ACPI PPTT while we need to parse CPU cache nodes
in the device tree. The cacheinfo changes here is to enable the re-use
of the cacheinfo to detect the cache attributes for all the CPU quite
early even before the scondardaries are booted so that the information
can be used to build the schedular domains especially the last level
cache(LLC).
-----BEGIN PGP SIGNATURE-----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=UCxa
-----END PGP SIGNATURE-----
Merge tag 'arch-cache-topo-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into driver-core-next
Sudeep writes:
cacheinfo and arch_topology updates for v5.20
These are updates to fix some discrepancies we have in the CPU topology
parsing from the device tree /cpu-map node and the divergence from the
behaviour on a ACPI enabled platform. The expectation is that both DT
and ACPI enabled systems must present consistent view of the CPU topology.
The current assignment of generated cluster count as the physical package
identifier for each CPU is wrong. The device tree bindings for CPU
topology supports sockets to infer the socket or physical package
identifier for a given CPU. It is now being made use of you address the
issue. These updates also assigns the cluster identifier as parsed from
the device tree cluster nodes within /cpu-map without support for
nesting of the clusters as there are no such reported/known platforms.
In order to be on par with ACPI PPTT physical package/socket support,
these updates also include support for socket nodes in /cpu-map.
The only exception is that the last level cache id information can be
inferred from the same ACPI PPTT while we need to parse CPU cache nodes
in the device tree. The cacheinfo changes here is to enable the re-use
of the cacheinfo to detect the cache attributes for all the CPU quite
early even before the scondardaries are booted so that the information
can be used to build the schedular domains especially the last level
cache(LLC).
* tag 'arch-cache-topo-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (21 commits)
ACPI: Remove the unused find_acpi_cpu_cache_topology()
arch_topology: Warn that topology for nested clusters is not supported
arch_topology: Add support for parsing sockets in /cpu-map
arch_topology: Set cluster identifier in each core/thread from /cpu-map
arch_topology: Limit span of cpu_clustergroup_mask()
arch_topology: Don't set cluster identifier as physical package identifier
arch_topology: Avoid parsing through all the CPUs once a outlier CPU is found
arch_topology: Check for non-negative value rather than -1 for IDs validity
arch_topology: Set thread sibling cpumask only within the cluster
arch_topology: Drop LLC identifier stash from the CPU topology
arm64: topology: Remove redundant setting of llc_id in CPU topology
arch_topology: Use the last level cache information from the cacheinfo
arch_topology: Add support to parse and detect cache attributes
cacheinfo: Align checks in cache_shared_cpu_map_{setup,remove} for readability
cacheinfo: Use cache identifiers to check if the caches are shared if available
cacheinfo: Allow early detection and population of cache attributes
cacheinfo: Add support to check if last level cache(LLC) is valid or shared
cacheinfo: Move cache_leaves_are_shared out of CONFIG_OF
cacheinfo: Add helper to access any cache index for a given CPU
cacheinfo: Use of_cpu_device_node_get instead cpu_dev->of_node
...
|
||
|
Sudeep Holla
|
00e66e37af |
arch_topology: Warn that topology for nested clusters is not supported
We don't support the topology for clusters of CPU clusters while the DT and ACPI bindings theoritcally support the same. Just warn about the same so that it is clear to the users of arch_topology that the nested clusters are not yet supported. Link: https://lore.kernel.org/r/20220704101605.1318280-21-sudeep.holla@arm.com Tested-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> |
||
|
Sudeep Holla
|
dea8c0b40f |
arch_topology: Add support for parsing sockets in /cpu-map
Finally let us add support for socket nodes in /cpu-map in the device tree. Since this may not be present in all the old platforms and even most of the existing platforms, we need to assume absence of the socket node indicates that it is a single socket system and handle appropriately. Also it is likely that most single socket systems skip to as the node since it is optional. Link: https://lore.kernel.org/r/20220704101605.1318280-20-sudeep.holla@arm.com Tested-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> |
||
|
Sudeep Holla
|
556c9678a7 |
arch_topology: Set cluster identifier in each core/thread from /cpu-map
Let us set the cluster identifier as parsed from the device tree cluster nodes within /cpu-map. We don't support nesting of clusters yet as there are no real hardware to support clusters of clusters. Link: https://lore.kernel.org/r/20220704101605.1318280-19-sudeep.holla@arm.com Tested-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> |
||
Ionela Voinescu
|
bfcc439743 |
arch_topology: Limit span of cpu_clustergroup_mask()
Currently the cluster identifier is not set on DT based platforms. The reset or default value is -1 for all the CPUs. Once we assign the cluster identifier values correctly, the cluster_sibling mask will be populated and returned by cpu_clustergroup_mask() to contribute in the creation of the CLS scheduling domain level, if SCHED_CLUSTER is enabled. To avoid topologies that will result in questionable or incorrect scheduling domains, impose restrictions regarding the span of clusters, as presented to scheduling domains building code: cluster_sibling should not span more or the same CPUs as cpu_coregroup_mask(). This is needed in order to obtain a strict separation between the MC and CLS levels, and maintain the same domains for existing platforms in the presence of CONFIG_SCHED_CLUSTER, where the new cluster information is redundant and irrelevant for the scheduler. While previously the scheduling domain builder code would have removed MC as redundant and kept CLS if SCHED_CLUSTER was enabled and the cpu_coregroup_mask() and cpu_clustergroup_mask() spanned the same CPUs, now CLS will be removed and MC kept. Link: https://lore.kernel.org/r/20220704101605.1318280-18-sudeep.holla@arm.com Cc: Darren Hart <darren@os.amperecomputing.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> |
||
|
Sudeep Holla
|
26a2b73a7b |
arch_topology: Don't set cluster identifier as physical package identifier
Currently as we parse the CPU topology from /cpu-map node from the device tree, we assign generated cluster count as the physical package identifier for each CPU which is wrong. The device tree bindings for CPU topology supports sockets to infer the socket or physical package identifier for a given CPU. Since it is fairly new and not supported on most of the old and existing systems, we can assume all such systems have single socket/physical package. Fix the physical package identifier to 0 by removing the assignment of cluster identifier to the same. Link: https://lore.kernel.org/r/20220704101605.1318280-17-sudeep.holla@arm.com Tested-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> |
||
|
Sudeep Holla
|
5a01bb8efb |
arch_topology: Avoid parsing through all the CPUs once a outlier CPU is found
There is no point in looping through all the CPU's physical package identifier to check if it is valid or not once a CPU which is outside the topology(i.e. outlier CPU) is found. Let us just break out of the loop early in such case. Link: https://lore.kernel.org/r/20220704101605.1318280-16-sudeep.holla@arm.com Tested-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> |
||
|
Sudeep Holla
|
9eb5e54f87 |
arch_topology: Check for non-negative value rather than -1 for IDs validity
Instead of just comparing the cpu topology IDs with -1 to check their validity, improve that by checking for a valid non-negative value. Link: https://lore.kernel.org/r/20220704101605.1318280-15-sudeep.holla@arm.com Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> |
||
|
Sudeep Holla
|
3f8283296b |
arch_topology: Set thread sibling cpumask only within the cluster
Currently the cluster identifier is not set on the DT based platforms. The reset or default value is -1 for all the CPUs. Once we assign the cluster identifier values correctly that may result in getting the thread siblings wrong as the core identifiers can be same for 2 different CPUs belonging to 2 different cluster. So, in order to get the thread sibling cpumasks correct, we need to update them only if the cores they belong are in the same cluster within the socket. Let us skip updation of the thread sibling cpumaks if the cluster identifier doesn't match. This change won't affect even if the cluster identifiers are not set currently but will avoid any breakage once we set the same correctly. Link: https://lore.kernel.org/r/20220704101605.1318280-14-sudeep.holla@arm.com Tested-by: Gavin Shan <gshan@redhat.com> Tested-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> |
||
|
Sudeep Holla
|
5b8dc787ce |
arch_topology: Drop LLC identifier stash from the CPU topology
Since the cacheinfo LLC information is used directly in arch_topology, there is no need to parse and store the LLC ID information only for ACPI systems in the CPU topology. Remove the redundant LLC ID from the generic CPU arch_topology information. Link: https://lore.kernel.org/r/20220704101605.1318280-13-sudeep.holla@arm.com Tested-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> |
||
|
Sudeep Holla
|
f027db2f9a |
arch_topology: Use the last level cache information from the cacheinfo
The cacheinfo is now initialised early along with the CPU topology initialisation. Instead of relying on the LLC ID information parsed separately only with ACPI PPTT elsewhere, migrate to use the similar information from the cacheinfo. This is generic for both DT and ACPI systems. The ACPI LLC ID information parsed separately can now be removed from arch specific code. Link: https://lore.kernel.org/r/20220704101605.1318280-11-sudeep.holla@arm.com Tested-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> |
||
|
Sudeep Holla
|
38db9b9546 |
arch_topology: Add support to parse and detect cache attributes
Currently ACPI populates just the minimum information about the last level cache from PPTT in order to feed the same to build sched_domains. Similar support for DT platforms is not present. In order to enable the same, the entire cache hierarchy information can be built as part of CPU topoplogy parsing both on ACPI and DT platforms. Note that this change builds the cacheinfo early even on ACPI systems, but the current mechanism of building llc_sibling mask remains unchanged. Link: https://lore.kernel.org/r/20220704101605.1318280-10-sudeep.holla@arm.com Tested-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> |
||
|
Sudeep Holla
|
521103134a |
cacheinfo: Align checks in cache_shared_cpu_map_{setup,remove} for readability
The checks to skip the CPU itself or no cacheinfo case are implemented
bit differently though the effect is exactly same. Just align the
implementation in both cache_shared_cpu_map_{setup,remove} just for
improved readability. No functional change.
Link: https://lore.kernel.org/r/20220704101605.1318280-9-sudeep.holla@arm.com
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
||
|
Sudeep Holla
|
f16d1becf9 |
cacheinfo: Use cache identifiers to check if the caches are shared if available
The cache identifiers is an optional property on most of the platforms. The presence of one must be indicated by the CACHE_ID valid bit in the attributes. We can use the cache identifiers provided by the firmware to check if any two cpus share the same cache instead of relying on the fw_token generated and set in the OS. Link: https://lore.kernel.org/r/20220704101605.1318280-8-sudeep.holla@arm.com Tested-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> |
||
|
Sudeep Holla
|
36bbc5b4ff |
cacheinfo: Allow early detection and population of cache attributes
Some architecture/platforms may need to setup cache properties very early in the boot along with other cpu topologies so that all these information can be used to build sched_domains which is used by the scheduler. Allow detect_cache_attributes to be called quite early during the boot. Link: https://lore.kernel.org/r/20220704101605.1318280-7-sudeep.holla@arm.com Tested-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> |
||
|
Sudeep Holla
|
cc1cfc47ea |
cacheinfo: Add support to check if last level cache(LLC) is valid or shared
It is useful to have helper to check if the given two CPUs share last level cache. We can do that check by comparing fw_token or by comparing the cache ID. Currently we check just for fw_token as the cache ID is optional. This helper can be used to build the llc_sibling during arch specific topology parsing and feeding information to the sched_domains. This also helps to get rid of llc_id in the CPU topology as it is sort of duplicate information. Also add helper to check if the llc information in cacheinfo is valid or not. Link: https://lore.kernel.org/r/20220704101605.1318280-6-sudeep.holla@arm.com Tested-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> |
||
|
Sudeep Holla
|
9447eb0f15 |
cacheinfo: Move cache_leaves_are_shared out of CONFIG_OF
cache_leaves_are_shared is already used even with ACPI and PPTT. It checks if the cache leaves are the shared based on fw_token pointer. However it is defined conditionally only if CONFIG_OF is enabled which is wrong. Move the function cache_leaves_are_shared out of CONFIG_OF and keep it generic. It also handles the case where both OF and ACPI is not defined. Link: https://lore.kernel.org/r/20220704101605.1318280-5-sudeep.holla@arm.com Tested-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> |
||
|
Sudeep Holla
|
b14e8d21f7 |
cacheinfo: Add helper to access any cache index for a given CPU
The cacheinfo for a given CPU at a given index is used at quite a few places by fetching the base point for index 0 using the helper per_cpu_cacheinfo(cpu) and offsetting it by the required index. Instead, add another helper to fetch the required pointer directly and use it to simplify and improve readability. Link: https://lore.kernel.org/r/20220704101605.1318280-4-sudeep.holla@arm.com Tested-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> |
||
|
Sudeep Holla
|
d4ec840bae |
cacheinfo: Use of_cpu_device_node_get instead cpu_dev->of_node
The of_cpu_device_node_get takes care of fetching the CPU'd device node either from cached cpu_dev->of_node if cpu_dev is initialised or uses of_get_cpu_node to parse and fetch node if cpu_dev isn't available yet. Just use of_cpu_device_node_get instead of getting the cpu device first and then using cpu_dev->of_node for two reasons: 1. There is no other use of cpu_dev and can be simplified 2. It enabled the use detect_cache_attributes and hence cache_setup_of_node much earlier before the CPUs are registered as devices. Link: https://lore.kernel.org/r/20220704101605.1318280-3-sudeep.holla@arm.com Tested-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> |
||
Saravana Kannan
|
8f486cab26 |
driver core: fw_devlink: Allow firmware to mark devices as best effort
When firmware sets the FWNODE_FLAG_BEST_EFFORT flag for a fwnode, fw_devlink will do a best effort ordering for that device where it'll only enforce the probe/suspend/resume ordering of that device with suppliers that have drivers. The driver of that device can then decide if it wants to defer probe or probe without the suppliers. This will be useful for avoid probe delays of the console device that were caused by commit |
||
Zhang Wensheng
|
70fe758352 |
driver core: fix potential deadlock in __driver_attach
In __driver_attach function, There are also AA deadlock problem, like the commit |
||
Yangxi Xiang
|
31c779f293 |
devtmpfs: fix the dangling pointer of global devtmpfsd thread
When the devtmpfs fails to mount, a dangling pointer still remains in global. Specifically, the err variable is passed by a pointer to the devtmpfsd. When the devtmpfsd exits, it sets the error and completes the setup_done. In this situation, the thread pointer is not set to null. After the devtmpfsd exited, the devtmpfs can wakes up the destroyed devtmpfsd thread by wake_up_process if a device change event comes. Signed-off-by: Yangxi Xiang <xyangxi5@gmail.com> Link: https://lore.kernel.org/r/20220627120409.11174-1-xyangxi5@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
38a523a294 |
Revert "devcoredump: remove the useless gfp_t parameter in dev_coredumpv and dev_coredumpm"
This reverts commit
|
||
Duoming Zhou
|
77515ebaf0 |
devcoredump: remove the useless gfp_t parameter in dev_coredumpv and dev_coredumpm
The dev_coredumpv() and dev_coredumpm() could not be used in atomic
context, because they call kvasprintf_const() and kstrdup() with
GFP_KERNEL parameter. The process is shown below:
dev_coredumpv(.., gfp_t gfp)
dev_coredumpm(.., gfp_t gfp)
dev_set_name
kobject_set_name_vargs
kvasprintf_const(GFP_KERNEL, ...); //may sleep
kstrdup(s, GFP_KERNEL); //may sleep
This patch removes gfp_t parameter of dev_coredumpv() and dev_coredumpm()
and changes the gfp_t parameter of kzalloc() in dev_coredumpm() to
GFP_KERNEL in order to show they could not be used in atomic context.
Fixes:
|
||
Andy Shevchenko
|
82b070beae |
driver core: Introduce device_find_any_child() helper
There are several places in the kernel where this kind of functionality is being used. Provide a generic helper for such cases. Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220610120219.18988-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Saravana Kannan
|
9cbffc7a59 |
driver core: Delete driver_deferred_probe_check_state()
The function is no longer used. So delete it. Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20220601070707.3946847-10-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Saravana Kannan
|
71066545b4 |
driver core: Set fw_devlink.strict=1 by default
Now that deferred_probe_timeout is non-zero by default, fw_devlink will never permanently block the probing of devices. It'll try its best to probe the devices in the right order and then finally let devices probe even if their suppliers don't have any drivers. Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20220601070707.3946847-8-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Saravana Kannan
|
f516d01b9d |
Revert "driver core: Set default deferred_probe_timeout back to 0."
This reverts commit 11f7e7ef553b6b93ac1aa74a3c2011b9cc8aeb61. Let's take another shot at getting deferred_probe_timeout=10 to work. Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20220601070707.3946847-7-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Saravana Kannan
|
2f8c3ae828 |
driver core: Add wait_for_init_devices_probe helper function
Some devices might need to be probed and bound successfully before the kernel boot sequence can finish and move on to init/userspace. For example, a network interface might need to be bound to be able to mount a NFS rootfs. With fw_devlink=on by default, some of these devices might be blocked from probing because they are waiting on a optional supplier that doesn't have a driver. While fw_devlink will eventually identify such devices and unblock the probing automatically, it might be too late by the time it unblocks the probing of devices. For example, the IP4 autoconfig might timeout before fw_devlink unblocks probing of the network interface. This function is available to temporarily try and probe all devices that have a driver even if some of their suppliers haven't been added or don't have drivers. The drivers can then decide which of the suppliers are optional vs mandatory and probe the device if possible. By the time this function returns, all such "best effort" probes are guaranteed to be completed. If a device successfully probes in this mode, we delete all fw_devlink discovered dependencies of that device where the supplier hasn't yet probed successfully because they have to be optional dependencies. This also means that some devices that aren't needed for init and could have waited for their optional supplier to probe (when the supplier's module is loaded later on) would end up probing prematurely with limited functionality. So call this function only when boot would fail without it. Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20220601070707.3946847-5-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Saravana Kannan
|
5a46079a96 |
PM: domains: Delete usage of driver_deferred_probe_check_state()
Now that fw_devlink=on by default and fw_devlink supports "power-domains" property, the execution will never get to the point where driver_deferred_probe_check_state() is called before the supplier has probed successfully or before deferred probe timeout has expired. So, delete the call and replace it with -ENODEV. Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20220601070707.3946847-2-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Linus Torvalds
|
07953c54a1 |
firmware_loader: enable XZ by default if compressed support is enabled
Commit |
||
|
Saravana Kannan
|
9be4cbd09d |
driver core: Set default deferred_probe_timeout back to 0.
Since we had to effectively reverted commit |
||
|
Saravana Kannan
|
5ee76c256e |
driver core: Fix wait_for_device_probe() & deferred_probe_timeout interaction
Mounting NFS rootfs was timing out when deferred_probe_timeout was non-zero [1]. This was because ip_auto_config() initcall times out waiting for the network interfaces to show up when deferred_probe_timeout was non-zero. While ip_auto_config() calls wait_for_device_probe() to make sure any currently running deferred probe work or asynchronous probe finishes, that wasn't sufficient to account for devices being deferred until deferred_probe_timeout. Commit |
||
|
Linus Torvalds
|
500a434fc5 |
Driver core changes for 5.19-rc1
Here is the set of driver core changes for 5.19-rc1.
Note, I'm not really happy with this pull request as-is, see below for
details, but overall this is all good for everything but a small set of
systems, which we have a fix for already.
Lots of tiny driver core changes and cleanups happened this cycle,
but the two major things were:
- firmware_loader reorganization and additions including the
ability to have XZ compressed firmware images and the ability
for userspace to initiate the firmware load when it needs to,
instead of being always initiated by the kernel. FPGA devices
specifically want this ability to have their firmware changed
over the lifetime of the system boot, and this allows them to
work without having to come up with yet-another-custom-uapi
interface for loading firmware for them.
- physical location support added to sysfs so that devices that
know this information, can tell userspace where they are
located in a common way. Some ACPI devices already support
this today, and more bus types should support this in the
future.
Smaller changes included:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten any
linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request if you want to take them directly, _OR_ I can just revert
the probe timeout changes and they can wait for the next -rc1 merge
cycle. Given that the fixes are tested, and pretty simple, I'm leaning
toward that choice. Sorry this all came at the end of the merge window,
I should have resolved this all 2 weeks ago, that's my fault as it was
in the middle of some travel for me.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time outs.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYpnv/A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk/fACgvmenbo5HipqyHnOmTQlT50xQ9EYAn2eTq6ai
GkjLXBGNWOPBa5cU52qf
=yEi/
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.19-rc1.
Lots of tiny driver core changes and cleanups happened this cycle, but
the two major things are:
- firmware_loader reorganization and additions including the ability
to have XZ compressed firmware images and the ability for userspace
to initiate the firmware load when it needs to, instead of being
always initiated by the kernel. FPGA devices specifically want this
ability to have their firmware changed over the lifetime of the
system boot, and this allows them to work without having to come up
with yet-another-custom-uapi interface for loading firmware for
them.
- physical location support added to sysfs so that devices that know
this information, can tell userspace where they are located in a
common way. Some ACPI devices already support this today, and more
bus types should support this in the future.
Smaller changes include:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten
any linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time-outs"
* tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
driver core: fix deadlock in __device_attach
kernfs: Separate kernfs_pr_cont_buf and rename_lock.
topology: Remove unused cpu_cluster_mask()
driver core: Extend deferred probe timeout on driver registration
MAINTAINERS: add Russ Weight as a firmware loader maintainer
driver: base: fix UAF when driver_attach failed
test_firmware: fix end of loop test in upload_read_show()
driver core: location: Add "back" as a possible output for panel
driver core: location: Free struct acpi_pld_info *pld
driver core: Add "*" wildcard support to driver_async_probe cmdline param
driver core: location: Check for allocations failure
arch_topology: Trace the update thermal pressure
kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file.
export: fix string handling of namespace in EXPORT_SYMBOL_NS
rpmsg: use local 'dev' variable
rpmsg: Fix calling device_lock() on non-initialized device
firmware_loader: describe 'module' parameter of firmware_upload_register()
firmware_loader: Move definitions from sysfs_upload.h to sysfs.h
firmware_loader: Fix configs for sysfs split
selftests: firmware: Add firmware upload selftests
...
|
||
|
Linus Torvalds
|
54c2cc7919 |
USB / Thunderbolt changes for 5.19-rc1
Here is the "big" set of USB and Thunderbolt driver changes for
5.18-rc1. For the most part it's been a quiet development cycle for the
USB core, but there are the usual "hot spots" of development activity.
Included in here are:
- Thunderbolt driver updates:
- fixes for devices without displayport adapters
- lane bonding support and improvements
- other minor changes based on device testing
- dwc3 gadget driver changes. It seems this driver will never
be finished given that the IP core is showing up in zillions
of new devices and each implementation decides to do something
different with it...
- uvc gadget driver updates as more devices start to use and
rely on this hardware as well
- usb_maxpacket() api changes to remove an unneeded and unused
parameter.
- usb-serial driver device id updates and small cleanups
- typec cleanups and fixes based on device testing
- device tree updates for usb properties
- lots of other small fixes and driver updates.
All of these have been in linux-next for weeks with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYpnZGw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymQhwCeLVANsQjBcL4ys4skl+1In17y28gAn3rEZ7rQ
Yv4uP9zadUqg3Cx0vjgf
=3s5s
-----END PGP SIGNATURE-----
Merge tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt driver changes for
5.18-rc1. For the most part it's been a quiet development cycle for
the USB core, but there are the usual "hot spots" of development
activity.
Included in here are:
- Thunderbolt driver updates:
- fixes for devices without displayport adapters
- lane bonding support and improvements
- other minor changes based on device testing
- dwc3 gadget driver changes.
It seems this driver will never be finished given that the IP core
is showing up in zillions of new devices and each implementation
decides to do something different with it...
- uvc gadget driver updates as more devices start to use and rely on
this hardware as well
- usb_maxpacket() api changes to remove an unneeded and unused
parameter.
- usb-serial driver device id updates and small cleanups
- typec cleanups and fixes based on device testing
- device tree updates for usb properties
- lots of other small fixes and driver updates.
All of these have been in linux-next for weeks with no reported
problems"
* tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
USB: new quirk for Dell Gen 2 devices
usb: dwc3: core: Add error log when core soft reset failed
usb: dwc3: gadget: Move null pinter check to proper place
usb: hub: Simplify error and success path in port_over_current_notify
usb: cdns3: allocate TX FIFO size according to composite EP number
usb: dwc3: Fix ep0 handling when getting reset while doing control transfer
usb: Probe EHCI, OHCI controllers asynchronously
usb: isp1760: Fix out-of-bounds array access
xhci: Don't defer primary roothub registration if there is only one roothub
USB: serial: option: add Quectel BG95 modem
USB: serial: pl2303: fix type detection for odd device
xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI
xhci: Remove quirk for over 10 year old evaluation hardware
xhci: prevent U2 link power state if Intel tier policy prevented U1
xhci: use generic command timer for stop endpoint commands.
usb: host: xhci-plat: omit shared hcd if either root hub has no ports
usb: host: xhci-plat: prepare operation w/o shared hcd
usb: host: xhci-plat: create shared hcd after having added main hcd
xhci: prepare for operation w/o shared hcd
xhci: factor out parts of xhci_gen_setup()
...
|
||
|
Linus Torvalds
|
e1cbc3b96a |
IOMMU Updates for Linux v5.19
Including:
- Intel VT-d driver updates
- Domain force snooping improvement.
- Cleanups, no intentional functional changes.
- ARM SMMU driver updates
- Add new Qualcomm device-tree compatible strings
- Add new Nvidia device-tree compatible string for Tegra234
- Fix UAF in SMMUv3 shared virtual addressing code
- Force identity-mapped domains for users of ye olde SMMU
legacy binding
- Minor cleanups
- Patches to fix a BUG_ON in the vfio_iommu_group_notifier
- Groundwork for upcoming iommufd framework
- Introduction of DMA ownership so that an entire IOMMU group
is either controlled by the kernel or by user-space
- MT8195 and MT8186 support in the Mediatek IOMMU driver
- Patches to make forcing of cache-coherent DMA more coherent
between IOMMU drivers
- Fixes for thunderbolt device DMA protection
- Various smaller fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=W0hj
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Intel VT-d driver updates:
- Domain force snooping improvement.
- Cleanups, no intentional functional changes.
- ARM SMMU driver updates:
- Add new Qualcomm device-tree compatible strings
- Add new Nvidia device-tree compatible string for Tegra234
- Fix UAF in SMMUv3 shared virtual addressing code
- Force identity-mapped domains for users of ye olde SMMU legacy
binding
- Minor cleanups
- Fix a BUG_ON in the vfio_iommu_group_notifier:
- Groundwork for upcoming iommufd framework
- Introduction of DMA ownership so that an entire IOMMU group is
either controlled by the kernel or by user-space
- MT8195 and MT8186 support in the Mediatek IOMMU driver
- Make forcing of cache-coherent DMA more coherent between IOMMU
drivers
- Fixes for thunderbolt device DMA protection
- Various smaller fixes and cleanups
* tag 'iommu-updates-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (88 commits)
iommu/amd: Increase timeout waiting for GA log enablement
iommu/s390: Tolerate repeat attach_dev calls
iommu/vt-d: Remove hard coding PGSNP bit in PASID entries
iommu/vt-d: Remove domain_update_iommu_snooping()
iommu/vt-d: Check domain force_snooping against attached devices
iommu/vt-d: Block force-snoop domain attaching if no SC support
iommu/vt-d: Size Page Request Queue to avoid overflow condition
iommu/vt-d: Fold dmar_insert_one_dev_info() into its caller
iommu/vt-d: Change return type of dmar_insert_one_dev_info()
iommu/vt-d: Remove unneeded validity check on dev
iommu/dma: Explicitly sort PCI DMA windows
iommu/dma: Fix iova map result check bug
iommu/mediatek: Fix NULL pointer dereference when printing dev_name
iommu: iommu_group_claim_dma_owner() must always assign a domain
iommu/arm-smmu: Force identity domains for legacy binding
iommu/arm-smmu: Support Tegra234 SMMU
dt-bindings: arm-smmu: Add compatible for Tegra234 SOC
dt-bindings: arm-smmu: Document nvidia,memory-controller property
iommu/arm-smmu-qcom: Add SC8280XP support
dt-bindings: arm-smmu: Add compatible for Qualcomm SC8280XP
...
|
||
|
Linus Torvalds
|
9d004b2f4f |
cxl for 5.19
- Add driver-core infrastructure for lockdep validation of
device_lock(), and fixup a deadlock report that was previously hidden
behind the 'lockdep no validate' policy.
- Add CXL _OSC support for claiming native control of CXL hotplug and
error handling.
- Disable suspend in the presence of CXL memory unless and until a
protocol is identified for restoring PCI device context from memory
hosted on CXL PCI devices.
- Add support for snooping CXL mailbox commands to protect against
inopportune changes, like set-partition with the 'immediate' flag set.
- Rework how the driver detects legacy CXL 1.1 configurations (CXL DVSEC
/ 'mem_enable') before enabling new CXL 2.0 decode configurations (CXL
HDM Capability).
- Miscellaneous cleanups and fixes from -next exposure.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYpFUogAKCRDfioYZHlFs
Zz+VAP9o/NkYhbaM2Ne9ImgsdJii96gA8nN7q/q/ZoXjsSx2WQD+NRC5d3ZwZDCa
9YKEkntnvbnAZOCs+ZUuyZBgNh6vsgU=
=p92w
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl updates from Dan Williams:
"Compute Express Link (CXL) updates for this cycle.
The highlight is new driver-core infrastructure and CXL subsystem
changes for allowing lockdep to validate device_lock() usage. Thanks
to PeterZ for setting me straight on the current capabilities of the
lockdep API, and Greg acked it as well.
On the CXL ACPI side this update adds support for CXL _OSC so that
platform firmware knows that it is safe to still grant Linux native
control of PCIe hotplug and error handling in the presence of CXL
devices. A circular dependency problem was discovered between suspend
and CXL memory for cases where the suspend image might be stored in
CXL memory where that image also contains the PCI register state to
restore to re-enable the device. Disable suspend for now until an
architecture is defined to clarify that conflict.
Lastly a collection of reworks, fixes, and cleanups to the CXL
subsystem where support for snooping mailbox commands and properly
handling the "mem_enable" flow are the highlights.
Summary:
- Add driver-core infrastructure for lockdep validation of
device_lock(), and fixup a deadlock report that was previously
hidden behind the 'lockdep no validate' policy.
- Add CXL _OSC support for claiming native control of CXL hotplug and
error handling.
- Disable suspend in the presence of CXL memory unless and until a
protocol is identified for restoring PCI device context from memory
hosted on CXL PCI devices.
- Add support for snooping CXL mailbox commands to protect against
inopportune changes, like set-partition with the 'immediate' flag
set.
- Rework how the driver detects legacy CXL 1.1 configurations (CXL
DVSEC / 'mem_enable') before enabling new CXL 2.0 decode
configurations (CXL HDM Capability).
- Miscellaneous cleanups and fixes from -next exposure"
* tag 'cxl-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (47 commits)
cxl/port: Enable HDM Capability after validating DVSEC Ranges
cxl/port: Reuse 'struct cxl_hdm' context for hdm init
cxl/port: Move endpoint HDM Decoder Capability init to port driver
cxl/pci: Drop @info argument to cxl_hdm_decode_init()
cxl/mem: Merge cxl_dvsec_ranges() and cxl_hdm_decode_init()
cxl/mem: Skip range enumeration if mem_enable clear
cxl/mem: Consolidate CXL DVSEC Range enumeration in the core
cxl/pci: Move cxl_await_media_ready() to the core
cxl/mem: Validate port connectivity before dvsec ranges
cxl/mem: Fix cxl_mem_probe() error exit
cxl/pci: Drop wait_for_valid() from cxl_await_media_ready()
cxl/pci: Consolidate wait_for_media() and wait_for_media_ready()
cxl/mem: Drop mem_enabled check from wait_for_media()
nvdimm: Fix firmware activation deadlock scenarios
device-core: Kill the lockdep_mutex
nvdimm: Drop nd_device_lock()
ACPI: NFIT: Drop nfit_device_lock()
nvdimm: Replace lockdep_mutex with local lock classes
cxl: Drop cxl_device_lock()
cxl/acpi: Add root device lockdep validation
...
|
||
|
Linus Torvalds
|
98931dd95f |
Yang Shi has improved the behaviour of khugepaged collapsing of readonly
file-backed transparent hugepages.
Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for runtime
enablement of the recent huge page vmemmap optimization feature.
Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
David Vernet has done some fixup work on the memcg selftests.
Peter Xu has taught userfaultfd to handle write protection faults against
shmem- and hugetlbfs-backed files.
More DAMON development from SeongJae Park - adding online tuning of the
feature and support for monitoring of fixed virtual address ranges. Also
easier discovery of which monitoring operations are available.
Nadav Amit has done some optimization of TLB flushing during mprotect().
Neil Brown continues to labor away at improving our swap-over-NFS support.
David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
Peng Liu fixed some errors in the core hugetlb code.
Joao Martins has reduced the amount of memory consumed by device-dax's
compound devmaps.
Some cleanups of the arch-specific pagemap code from Anshuman Khandual.
Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
Roman Gushchin has done more work on the memcg selftests.
And, of course, many smaller fixes and cleanups. Notably, the customary
million cleanup serieses from Miaohe Lin.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYo52xQAKCRDdBJ7gKXxA
jtJFAQD238KoeI9z5SkPMaeBRYSRQmNll85mxs25KapcEgWgGQD9FAb7DJkqsIVk
PzE+d9hEfirUGdL6cujatwJ6ejYR8Q8=
=nFe6
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Almost all of MM here. A few things are still getting finished off,
reviewed, etc.
- Yang Shi has improved the behaviour of khugepaged collapsing of
readonly file-backed transparent hugepages.
- Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
- Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for
runtime enablement of the recent huge page vmemmap optimization
feature.
- Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
- Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
- Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
- David Vernet has done some fixup work on the memcg selftests.
- Peter Xu has taught userfaultfd to handle write protection faults
against shmem- and hugetlbfs-backed files.
- More DAMON development from SeongJae Park - adding online tuning of
the feature and support for monitoring of fixed virtual address
ranges. Also easier discovery of which monitoring operations are
available.
- Nadav Amit has done some optimization of TLB flushing during
mprotect().
- Neil Brown continues to labor away at improving our swap-over-NFS
support.
- David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
- Peng Liu fixed some errors in the core hugetlb code.
- Joao Martins has reduced the amount of memory consumed by
device-dax's compound devmaps.
- Some cleanups of the arch-specific pagemap code from Anshuman
Khandual.
- Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
- Roman Gushchin has done more work on the memcg selftests.
... and, of course, many smaller fixes and cleanups. Notably, the
customary million cleanup serieses from Miaohe Lin"
* tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (381 commits)
mm: kfence: use PAGE_ALIGNED helper
selftests: vm: add the "settings" file with timeout variable
selftests: vm: add "test_hmm.sh" to TEST_FILES
selftests: vm: check numa_available() before operating "merge_across_nodes" in ksm_tests
selftests: vm: add migration to the .gitignore
selftests/vm/pkeys: fix typo in comment
ksm: fix typo in comment
selftests: vm: add process_mrelease tests
Revert "mm/vmscan: never demote for memcg reclaim"
mm/kfence: print disabling or re-enabling message
include/trace/events/percpu.h: cleanup for "percpu: improve percpu_alloc_percpu event trace"
include/trace/events/mmflags.h: cleanup for "tracing: incorrect gfp_t conversion"
mm: fix a potential infinite loop in start_isolate_page_range()
MAINTAINERS: add Muchun as co-maintainer for HugeTLB
zram: fix Kconfig dependency warning
mm/shmem: fix shmem folio swapoff hang
cgroup: fix an error handling path in alloc_pagecache_max_30M()
mm: damon: use HPAGE_PMD_SIZE
tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate
nodemask.h: fix compilation error with GCC12
...
|
||
|
Linus Torvalds
|
268db333b5 |
Device properties framework updates for 5.19-rc1
- Allow error pointer to be passed to fwnode APIs (Andy Shevchenko).
- Introduce fwnode_for_each_parent_node() (Andy Shevchenko, Douglas
Anderson).
- Advertise fwnode and device property count API calls (Andy
Shevchenko).
- Clean up fwnode_is_ancestor_of() (Andy Shevchenko).
- Convert device_{dma_supported,get_dma_attr} to fwnode (Sakari Ailus).
- Release subnode properties with data nodes (Sakari Ailus).
- Add ->iomap() and ->irq_get() to fwnode operations (Sakari Ailus).
-----BEGIN PGP SIGNATURE-----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=ly4P
-----END PGP SIGNATURE-----
Merge tag 'devprop-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull device properties framework updates from Rafael Wysocki:
"These mostly extend the device property API and make it easier to use
in some cases.
Specifics:
- Allow error pointer to be passed to fwnode APIs (Andy Shevchenko).
- Introduce fwnode_for_each_parent_node() (Andy Shevchenko, Douglas
Anderson).
- Advertise fwnode and device property count API calls (Andy
Shevchenko).
- Clean up fwnode_is_ancestor_of() (Andy Shevchenko).
- Convert device_{dma_supported,get_dma_attr} to fwnode (Sakari
Ailus).
- Release subnode properties with data nodes (Sakari Ailus).
- Add ->iomap() and ->irq_get() to fwnode operations (Sakari Ailus)"
* tag 'devprop-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
device property: Advertise fwnode and device property count API calls
device property: Fix recent breakage of fwnode_get_next_parent_dev()
device property: Drop 'test' prefix in parameters of fwnode_is_ancestor_of()
device property: Introduce fwnode_for_each_parent_node()
device property: Allow error pointer to be passed to fwnode APIs
ACPI: property: Release subnode properties with data nodes
device property: Add irq_get to fwnode operation
device property: Add iomap to fwnode operations
ACPI: property: Move acpi_fwnode_device_get_match_data() up
device property: Convert device_{dma_supported,get_dma_attr} to fwnode
|
||
|
Linus Torvalds
|
f4fb859665 |
Thermal control updates for 5.19-rc1
- Add thermal library and thermal tools to encapsulate the netlink
into event based callbacks (Daniel Lezcano, Jiapeng Chong).
- Improve overheat condition handling during suspend-to-idle in the
Intel PCH thermal driver (Zhang Rui).
- Use local ops instead of global ops in devfreq_cooling (Kant Fan).
- Clean up _OSC handling in int340x (Davidlohr Bueso).
- Switch hisi_termal from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
(Hesham Almatary).
- Add new k3 j72xx bangdap driver and the corresponding bindings
(Keerthy).
- Fix missing of_node_put() in the SC iMX driver at probe time
(Miaoqian Lin).
- Fix memory leak in __thermal_cooling_device_register() when
device_register() fails by calling thermal_cooling_device_destroy_sysfs()
(Yang Yingliang).
- Add sc8180x and sc8280xp compatible string in the DT bindings and
lMH support for QCom tsens driver (Bjorn Andersson).
- Fix OTP Calibration Register values conforming to the documentation
on RZ/G2L and bindings documentation for RZ/G2UL (Biju Das).
- Fix type in kerneldoc description for __thermal_bind_params (Corentin
Labbe).
- Fix potential NULL dereference in sr_thermal_probe() on Broadcom
platform (Zheng Yongjun).
- Add change mode ops to the thermal-of sensor (Manaf Meethalavalappu
Pallikunhi).
- Fix non-negative value support by preventing the value to be clamp
to zero (Stefan Wahren).
- Add compatible string and DT bindings for MSM8960 tsens driver
(Dmitry Baryshkov).
- Add hwmon support for K3 driver (Massimiliano Minella).
- Refactor and add multiple generations support for QCom ADC driver
(Jishnu Prakash).
- Use platform_get_irq_optional() to get the interrupt on RCar driver and
document Document RZ/V2L bindings (Lad Prabhakar).
- Remove NULL check after container_of() call from the Intel HFI
thermal driver (Haowen Bai).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmKL3MESHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxgzsQAKj4D0ROHLdqReYeIutS7IU6YQ+ejh3N
krcAZvxQd8B3sVwSHHABPdsHwwfYjP4BwoHHVtha5q+5zFGBq5F3fJHsDeRxN23T
NEOW81HBaLu81N5gNuAYg+NQcdqBR4U4IGKZfxWRyx13OMECXGtJRb/SIW/TuDYk
AQIrqOivVEsVRtn+qp+x0rKHsj6ge+2lU1OyJagr2BDhgLrwzxl6cmNBfali1C3D
sw4SqGwGVjEB0QDDpMbty9BsLEjNRE86kwoPh2u0K9dT9/b/P9pk1lp+pOnltspZ
eOdwr0CtoEHw2x5tuhbO7fmvNIuf5jgSDWsCrP/xYnsozcRiwWsgyeJj4f5soreN
kTJB8S/FH+fd7UuYqdmDIeJpDnkkGt1jIqjkDvfJNL7ffBWIe/meXKF4vBnrdlbd
FMNQwzgc5eug07IFjOE43V1v5Hw1H1leVUwZczOMGNIhqyy0WZyQr7vzwbr16jCO
x0hu3q3Y++5SUAUy9WzsOOrpRHa9JxUwVhZuLG7ajf+6pqPxB8kqs9CJe+sgWKju
T4KqHbljJ2Gnkm9SngT0BdnB+AgparhXf8/8Mj0ZBQvamXw+ylNbYfG7qTZk5Ne/
rUf4YDew6hGDqikyJBe2e0a1lLSoN4zaADC1lLYhC+Zp7m6eK0r3y3mhic0bZe1c
RU/2eeA4kTuZ
=3ltV
-----END PGP SIGNATURE-----
Merge tag 'thermal-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add a thermal library and thermal tools to wrap the netlink
interface into event-based callbacks, improve overheat condition
handling during suspend-to-idle on Intel SoCs, add some new hardware
support, fix bugs and clean up code.
Specifics:
- Add thermal library and thermal tools to encapsulate the netlink
into event based callbacks (Daniel Lezcano, Jiapeng Chong).
- Improve overheat condition handling during suspend-to-idle in the
Intel PCH thermal driver (Zhang Rui).
- Use local ops instead of global ops in devfreq_cooling (Kant Fan).
- Clean up _OSC handling in int340x (Davidlohr Bueso).
- Switch hisi_termal from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
(Hesham Almatary).
- Add new k3 j72xx bangdap driver and the corresponding bindings
(Keerthy).
- Fix missing of_node_put() in the SC iMX driver at probe time
(Miaoqian Lin).
- Fix memory leak in __thermal_cooling_device_register()
when device_register() fails by calling
thermal_cooling_device_destroy_sysfs() (Yang Yingliang).
- Add sc8180x and sc8280xp compatible string in the DT bindings and
lMH support for QCom tsens driver (Bjorn Andersson).
- Fix OTP Calibration Register values conforming to the documentation
on RZ/G2L and bindings documentation for RZ/G2UL (Biju Das).
- Fix type in kerneldoc description for __thermal_bind_params
(Corentin Labbe).
- Fix potential NULL dereference in sr_thermal_probe() on Broadcom
platform (Zheng Yongjun).
- Add change mode ops to the thermal-of sensor (Manaf Meethalavalappu
Pallikunhi).
- Fix non-negative value support by preventing the value to be clamp
to zero (Stefan Wahren).
- Add compatible string and DT bindings for MSM8960 tsens driver
(Dmitry Baryshkov).
- Add hwmon support for K3 driver (Massimiliano Minella).
- Refactor and add multiple generations support for QCom ADC driver
(Jishnu Prakash).
- Use platform_get_irq_optional() to get the interrupt on RCar driver
and document Document RZ/V2L bindings (Lad Prabhakar).
- Remove NULL check after container_of() call from the Intel HFI
thermal driver (Haowen Bai)"
* tag 'thermal-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (38 commits)
thermal: intel: pch: improve the cooling delay log
thermal: intel: pch: enhance overheat handling
thermal: intel: pch: move cooling delay to suspend_noirq phase
PM: wakeup: expose pm_wakeup_pending to modules
thermal: k3_j72xx_bandgap: Add the bandgap driver support
dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation
thermal/drivers/imx_sc_thermal: Fix refcount leak in imx_sc_thermal_probe
thermal/core: Fix memory leak in __thermal_cooling_device_register()
dt-bindings: thermal: tsens: Add sc8280xp compatible
dt-bindings: thermal: lmh: Add Qualcomm sc8180x compatible
thermal/drivers/qcom/lmh: Add sc8180x compatible
thermal/drivers/rz2gl: Fix OTP Calibration Register values
dt-bindings: thermal: rzg2l-thermal: Document RZ/G2UL bindings
thermal: thermal_of: fix typo on __thermal_bind_params
tools/thermal: remove unneeded semicolon
tools/lib/thermal: remove unneeded semicolon
thermal/drivers/broadcom: Fix potential NULL dereference in sr_thermal_probe
tools/thermal: Add thermal daemon skeleton
tools/thermal: Add a temperature capture tool
tools/thermal: Add util library
...
|
||
|
Linus Torvalds
|
09583dfed2 |
Power management updates for 5.19-rc1
- Update the Energy Model support code to allow the Energy Model to be
artificial, which means that the power values may not be on a uniform
scale with other devices providing power information, and update the
cpufreq_cooling and devfreq_cooling thermal drivers to support
artificial Energy Models (Lukasz Luba).
- Make DTPM check the Energy Model type (Lukasz Luba).
- Fix policy counter decrementation in cpufreq if Energy Model is in
use (Pierre Gondois).
- Add CPU-based scaling support to passive devfreq governor (Saravana
Kannan, Chanwoo Choi).
- Update the rk3399_dmc devfreq driver (Brian Norris).
- Export dev_pm_ops instead of suspend() and resume() in the IIO
chemical scd30 driver (Jonathan Cameron).
- Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and
PM-runtime counterparts (Jonathan Cameron).
- Move symbol exports in the IIO chemical scd30 driver into the
IIO_SCD30 namespace (Jonathan Cameron).
- Avoid device PM-runtime usage count underflows (Rafael Wysocki).
- Allow dynamic debug to control printing of PM messages (David
Cohen).
- Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
Bai).
- Preserve ACPI-table override during hibernation (Amadeusz Sławiński).
- Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).
- Make Intel RAPL power capping driver support the RaptorLake and
AlderLake N processors (Zhang Rui, Sumeet Pawnikar).
- Remove redundant store to value after multiply in the RAPL power
capping driver (Colin Ian King).
- Add AlderLake processor support to the intel_idle driver (Zhang Rui).
- Fix regression leading to no genpd governor in the PSCI cpuidle
driver and fix the riscv-sbi cpuidle driver to allow a genpd
governor to be used (Ulf Hansson).
- Fix cpufreq governor clean up code to avoid using kfree() directly
to free kobject-based items (Kevin Hao).
- Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe Leroy).
- Make intel_pstate notify frequency invariance code when no_turbo is
turned on and off (Chen Yu).
- Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas
Pandruvada).
- Make cpufreq avoid unnecessary frequency updates due to mismatch
between hardware and the frequency table (Viresh Kumar).
- Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify
code (Viresh Kumar).
- Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the
calling convention for some driver callbacks consistent (Rafael
Wysocki).
- Avoid accessing half-initialized cpufreq policies from the show()
and store() sysfs functions (Schspa Shi).
- Rearrange cpufreq_offline() to make the calling convention for some
driver callbacks consistent (Schspa Shi).
- Update CPPC handling in cpufreq (Pierre Gondois).
- Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski).
- Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
Hansson).
- Improve the way genpd deals with its governors (Ulf Hansson).
- Update the turbostat utility to version 2022.04.16 (Len Brown,
Dan Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen
Yu).
-----BEGIN PGP SIGNATURE-----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=Hewm
-----END PGP SIGNATURE-----
Merge tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add support for 'artificial' Energy Models in which power
numbers for different entities may be in different scales, add support
for some new hardware, fix bugs and clean up code in multiple places.
Specifics:
- Update the Energy Model support code to allow the Energy Model to
be artificial, which means that the power values may not be on a
uniform scale with other devices providing power information, and
update the cpufreq_cooling and devfreq_cooling thermal drivers to
support artificial Energy Models (Lukasz Luba).
- Make DTPM check the Energy Model type (Lukasz Luba).
- Fix policy counter decrementation in cpufreq if Energy Model is in
use (Pierre Gondois).
- Add CPU-based scaling support to passive devfreq governor (Saravana
Kannan, Chanwoo Choi).
- Update the rk3399_dmc devfreq driver (Brian Norris).
- Export dev_pm_ops instead of suspend() and resume() in the IIO
chemical scd30 driver (Jonathan Cameron).
- Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and
PM-runtime counterparts (Jonathan Cameron).
- Move symbol exports in the IIO chemical scd30 driver into the
IIO_SCD30 namespace (Jonathan Cameron).
- Avoid device PM-runtime usage count underflows (Rafael Wysocki).
- Allow dynamic debug to control printing of PM messages (David
Cohen).
- Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
Bai).
- Preserve ACPI-table override during hibernation (Amadeusz
Sławiński).
- Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).
- Make Intel RAPL power capping driver support the RaptorLake and
AlderLake N processors (Zhang Rui, Sumeet Pawnikar).
- Remove redundant store to value after multiply in the RAPL power
capping driver (Colin Ian King).
- Add AlderLake processor support to the intel_idle driver (Zhang
Rui).
- Fix regression leading to no genpd governor in the PSCI cpuidle
driver and fix the riscv-sbi cpuidle driver to allow a genpd
governor to be used (Ulf Hansson).
- Fix cpufreq governor clean up code to avoid using kfree() directly
to free kobject-based items (Kevin Hao).
- Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe
Leroy).
- Make intel_pstate notify frequency invariance code when no_turbo is
turned on and off (Chen Yu).
- Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas
Pandruvada).
- Make cpufreq avoid unnecessary frequency updates due to mismatch
between hardware and the frequency table (Viresh Kumar).
- Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify
code (Viresh Kumar).
- Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the
calling convention for some driver callbacks consistent (Rafael
Wysocki).
- Avoid accessing half-initialized cpufreq policies from the show()
and store() sysfs functions (Schspa Shi).
- Rearrange cpufreq_offline() to make the calling convention for some
driver callbacks consistent (Schspa Shi).
- Update CPPC handling in cpufreq (Pierre Gondois).
- Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski).
- Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
Hansson).
- Improve the way genpd deals with its governors (Ulf Hansson).
- Update the turbostat utility to version 2022.04.16 (Len Brown, Dan
Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen Yu)"
* tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (94 commits)
PM: domains: Trust domain-idle-states from DT to be correct by genpd
PM: domains: Measure power-on/off latencies in genpd based on a governor
PM: domains: Allocate governor data dynamically based on a genpd governor
PM: domains: Clean up some code in pm_genpd_init() and genpd_remove()
PM: domains: Fix initialization of genpd's next_wakeup
PM: domains: Fixup QoS latency measurements for IRQ safe devices in genpd
PM: domains: Measure suspend/resume latencies in genpd based on governor
PM: domains: Move the next_wakeup variable into the struct gpd_timing_data
PM: domains: Allocate gpd_timing_data dynamically based on governor
PM: domains: Skip another warning in irq_safe_dev_in_sleep_domain()
PM: domains: Rename irq_safe_dev_in_no_sleep_domain() in genpd
PM: domains: Don't check PM_QOS_FLAG_NO_POWER_OFF in genpd
PM: domains: Drop redundant code for genpd always-on governor
PM: domains: Add GENPD_FLAG_RPM_ALWAYS_ON for the always-on governor
powercap: intel_rapl: remove redundant store to value after multiply
cpufreq: CPPC: Enable dvfs_possible_from_any_cpu
cpufreq: CPPC: Enable fast_switch
ACPI: CPPC: Assume no transition latency if no PCCT
ACPI: bus: Set CPPC _OSC bits for all and when CPPC_LIB is supported
ACPI: CPPC: Check _OSC for flexible address space
...
|
||
|
Linus Torvalds
|
5d23bb5f25 |
regmap: Updates for v5.19
The main change here is Marek's addition of bulk read/write callbacks for individual regmaps, we've supported single register operations for a while but there's enough hardware out there which can use bulk equivalents to make it worthwhile. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmKLgdIACgkQJNaLcl1U h9BkMQf9GvA9ZtjOzR/K/R9IscyDqnJ/Svwp0nhnbrFzeCDMQyWEUVen+1tE45gl ACIC2RPDYUfuYeoHC6yxOYpJNwI5WhlLfO9uH14ojRl4JVjnjarFvbRb0xfgCCeg pp6QRb1DeZzUWQBMcW3ruo76gPOjEI94CVUNbXzcDOUS+ZUDPtbcyeB7wmG2i3zU qpbG6DN0av/tuFSiGZgE2OFA9pGFDQwsZiu5DYxCTk/vI6hH8lddbjnqtxZGi/hb g3Ho9XewkI2WTnTaSbbX8Rfl6n/rccrsXy9u7E1usK1vEmzU0mZHIpo1T91IFd5j ksSJcXWHb7d54tWCwV6AXwbC8ZS4NA== =Km5j -----END PGP SIGNATURE----- Merge tag 'regmap-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "The main change here is Marek's addition of bulk read/write callbacks for individual regmaps, we've supported single register operations for a while but there's enough hardware out there which can use bulk equivalents to make it worthwhile" * tag 'regmap-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Add missing map->bus check regmap: Add bulk read/write callbacks into regmap_config regmap: cache: set max_register with reg_stride regmap: Constify static regmap_bus structs |
||
Rafael J. Wysocki
|
cd8198a2c1 |
Merge branch 'pm-domains'
Merge generlic power domains update for 5.19-rc1: - Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski). - Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf Hansson). - Improve the way genpd deals with its governors (Ulf Hansson). * pm-domains: PM: domains: Trust domain-idle-states from DT to be correct by genpd PM: domains: Measure power-on/off latencies in genpd based on a governor PM: domains: Allocate governor data dynamically based on a genpd governor PM: domains: Clean up some code in pm_genpd_init() and genpd_remove() PM: domains: Fix initialization of genpd's next_wakeup PM: domains: Fixup QoS latency measurements for IRQ safe devices in genpd PM: domains: Measure suspend/resume latencies in genpd based on governor PM: domains: Move the next_wakeup variable into the struct gpd_timing_data PM: domains: Allocate gpd_timing_data dynamically based on governor PM: domains: Skip another warning in irq_safe_dev_in_sleep_domain() PM: domains: Rename irq_safe_dev_in_no_sleep_domain() in genpd PM: domains: Don't check PM_QOS_FLAG_NO_POWER_OFF in genpd PM: domains: Drop redundant code for genpd always-on governor PM: domains: Add GENPD_FLAG_RPM_ALWAYS_ON for the always-on governor PM: domains: Move genpd's time-accounting to ktime_get_mono_fast_ns() PM: domains: Extend dev_pm_domain_detach() doc |
||
|
Rafael J. Wysocki
|
95f2ce548a |
Merge branches 'pm-core', 'pm-sleep' and 'powercap'
Merge PM core changes, updates related to system sleep and power capping updates for 5.19-rc1: - Export dev_pm_ops instead of suspend() and resume() in the IIO chemical scd30 driver (Jonathan Cameron). - Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and PM-runtime counterparts (Jonathan Cameron). - Move symbol exports in the IIO chemical scd30 driver into the IIO_SCD30 namespace (Jonathan Cameron). - Avoid device PM-runtime usage count underflows (Rafael Wysocki). - Allow dynamic debug to control printing of PM messages (David Cohen). - Fix some kernel-doc comments in hibernation code (Yang Li, Haowen Bai). - Preserve ACPI-table override during hibernation (Amadeusz Sławiński). - Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson). - Make Intel RAPL power capping driver support the RaptorLake and AlderLake N processors (Zhang Rui, Sumeet Pawnikar). - Remove redundant store to value after multiply in the RAPL power capping driver (Colin Ian King). * pm-core: PM: runtime: Avoid device usage count underflows iio: chemical: scd30: Move symbol exports into IIO_SCD30 namespace PM: core: Add NS varients of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and runtime pm equiv iio: chemical: scd30: Export dev_pm_ops instead of suspend() and resume() * pm-sleep: cpuidle: PSCI: Improve support for suspend-to-RAM for PSCI OSI mode PM: runtime: Allow to call __pm_runtime_set_status() from atomic context PM: hibernate: Don't mark comment as kernel-doc x86/ACPI: Preserve ACPI-table override during hibernation PM: hibernate: Fix some kernel-doc comments PM: sleep: enable dynamic debug support within pm_pr_dbg() PM: sleep: Narrow down -DDEBUG on kernel/power/ files * powercap: powercap: intel_rapl: remove redundant store to value after multiply powercap: intel_rapl: add support for ALDERLAKE_N powercap: RAPL: Add Power Limit4 support for RaptorLake powercap: intel_rapl: add support for RaptorLake |
||
Joerg Roedel
|
b0dacee202 | Merge branches 'apple/dart', 'arm/mediatek', 'arm/msm', 'arm/smmu', 'ppc/pamu', 'x86/vt-d', 'x86/amd' and 'vfio-notifier-fix' into next | ||
Ulf Hansson
|
b2a92f354c |
PM: domains: Trust domain-idle-states from DT to be correct by genpd
If genpd has parsed the domain-idle-states from DT, it's reasonable to believe that the parsed data should be correct for the HW in question. Based upon this, it seem superfluous to let genpd measure the corresponding power-on/off latencies for these states. Therefore, let's improve the behaviour in genpd by avoiding the measurements for the domain-idle-states that have been parsed from DT. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Ulf Hansson
|
6961795f0d |
PM: domains: Measure power-on/off latencies in genpd based on a governor
The measurements of the power-on|off latencies in genpd for a PM domain are superfluous, unless the corresponding genpd has a governor assigned to it, which would make use of the data. Therefore, let's improve the behaviour in genpd by making the measurements conditional, based upon if there's a governor assigned. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Ulf Hansson
|
f38d1a6d00 |
PM: domains: Allocate governor data dynamically based on a genpd governor
If a genpd doesn't have an associated governor assigned, several variables in the struct generic_pm_domain becomes superfluous. Rather than wasting memory in allocated genpds, let's move the variables from the struct generic_pm_domain into a new separate struct. In this way, we can instead dynamically decide when we need to allocate the corresponding data for it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |