IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 61304336c67358d49a989e5e0060d8c99bad6ca8 ]
Lower layer device driver stop/wake TX by calling ieee80211_stop_queue()/
ieee80211_wake_queue() while hw scan. Sometimes hw scan and PTK rekey are
running in parallel, when M4 sent from wpa_supplicant arrive while the TX
queue is stopped, then the M4 will pending send, and then new key install
from wpa_supplicant. After TX queue wake up by lower layer device driver,
the M4 will be dropped by below call stack.
When key install started, the current key flag is set KEY_FLAG_TAINTED in
ieee80211_pairwise_rekey(), and then mac80211 wait key install complete by
lower layer device driver. Meanwhile ieee80211_tx_h_select_key() will return
TX_DROP for the M4 in step 12 below, and then ieee80211_free_txskb() called
by ieee80211_tx_dequeue(), so the M4 will not send and free, then the rekey
process failed becaue AP not receive M4. Please see details in steps below.
There are a interval between KEY_FLAG_TAINTED set for current key flag and
install key complete by lower layer device driver, the KEY_FLAG_TAINTED is
set in this interval, all packet including M4 will be dropped in this
interval, the interval is step 8~13 as below.
issue steps:
TX thread install key thread
1. stop_queue -idle-
2. sending M4 -idle-
3. M4 pending -idle-
4. -idle- starting install key from wpa_supplicant
5. -idle- =>ieee80211_key_replace()
6. -idle- =>ieee80211_pairwise_rekey() and set
currently key->flags |= KEY_FLAG_TAINTED
7. -idle- =>ieee80211_key_enable_hw_accel()
8. -idle- =>drv_set_key() and waiting key install
complete from lower layer device driver
9. wake_queue -waiting state-
10. re-sending M4 -waiting state-
11. =>ieee80211_tx_h_select_key() -waiting state-
12. drop M4 by KEY_FLAG_TAINTED -waiting state-
13. -idle- install key complete with success/fail
success: clear flag KEY_FLAG_TAINTED
fail: start disconnect
Hence add check in step 11 above to allow the EAPOL send out in the
interval. If lower layer device driver use the old key/cipher to encrypt
the M4, then AP received/decrypt M4 correctly, after M4 send out, lower
layer device driver install the new key/cipher to hardware and return
success.
If lower layer device driver use new key/cipher to send the M4, then AP
will/should drop the M4, then it is same result with this issue, AP will/
should kick out station as well as this issue.
issue log:
kworker/u16:4-5238 [000] 6456.108926: stop_queue: phy1 queue:0, reason:0
wpa_supplicant-961 [003] 6456.119737: rdev_tx_control_port: wiphy_name=phy1 name=wlan0 ifindex=6 dest=ARRAY[9e, 05, 31, 20, 9b, d0] proto=36488 unencrypted=0
wpa_supplicant-961 [003] 6456.119839: rdev_return_int_cookie: phy1, returned 0, cookie: 504
wpa_supplicant-961 [003] 6456.120287: rdev_add_key: phy1, netdev:wlan0(6), key_index: 0, mode: 0, pairwise: true, mac addr: 9e:05:31:20:9b:d0
wpa_supplicant-961 [003] 6456.120453: drv_set_key: phy1 vif:wlan0(2) sta:9e:05:31:20:9b:d0 cipher:0xfac04, flags=0x9, keyidx=0, hw_key_idx=0
kworker/u16:9-3829 [001] 6456.168240: wake_queue: phy1 queue:0, reason:0
kworker/u16:9-3829 [001] 6456.168255: drv_wake_tx_queue: phy1 vif:wlan0(2) sta:9e:05:31:20:9b:d0 ac:0 tid:7
kworker/u16:9-3829 [001] 6456.168305: cfg80211_control_port_tx_status: wdev(1), cookie: 504, ack: false
wpa_supplicant-961 [003] 6459.167982: drv_return_int: phy1 - -110
issue call stack:
nl80211_frame_tx_status+0x230/0x340 [cfg80211]
cfg80211_control_port_tx_status+0x1c/0x28 [cfg80211]
ieee80211_report_used_skb+0x374/0x3e8 [mac80211]
ieee80211_free_txskb+0x24/0x40 [mac80211]
ieee80211_tx_dequeue+0x644/0x954 [mac80211]
ath10k_mac_tx_push_txq+0xac/0x238 [ath10k_core]
ath10k_mac_op_wake_tx_queue+0xac/0xe0 [ath10k_core]
drv_wake_tx_queue+0x80/0x168 [mac80211]
__ieee80211_wake_txqs+0xe8/0x1c8 [mac80211]
_ieee80211_wake_txqs+0xb4/0x120 [mac80211]
ieee80211_wake_txqs+0x48/0x80 [mac80211]
tasklet_action_common+0xa8/0x254
tasklet_action+0x2c/0x38
__do_softirq+0xdc/0x384
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Link: https://lore.kernel.org/r/20230801064751.25803-1-quic_wgong@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dcda165706b9fbfd685898d46a6749d7d397e0c0 ]
This fixes the following warnings:
net/bluetooth/hci_core.c: In function ‘hci_register_dev’:
net/bluetooth/hci_core.c:2620:54: warning: ‘%d’ directive output may
be truncated writing between 1 and 10 bytes into a region of size 5
[-Wformat-truncation=]
2620 | snprintf(hdev->name, sizeof(hdev->name), "hci%d", id);
| ^~
net/bluetooth/hci_core.c:2620:50: note: directive argument in the range
[0, 2147483647]
2620 | snprintf(hdev->name, sizeof(hdev->name), "hci%d", id);
| ^~~~~~~
net/bluetooth/hci_core.c:2620:9: note: ‘snprintf’ output between 5 and
14 bytes into a destination of size 8
2620 | snprintf(hdev->name, sizeof(hdev->name), "hci%d", id);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d8e801422d66e4b8c7b187c52196bef94eed887 ]
While executing the Android 13 CTS Verifier Secure Server test on a
ChromeOS device, it was observed that the Bluetooth host initiates
authentication for an RFCOMM connection after SSP completes.
When this happens, some Intel Bluetooth controllers, like AC9560, would
disconnect with "Connection Rejected due to Security Reasons (0x0e)".
Historically, BlueZ did not mandate this authentication while an
authenticated combination key was already in use for the connection.
This behavior was changed since commit 7b5a9241b780
("Bluetooth: Introduce requirements for security level 4").
So, this patch addresses the aforementioned disconnection issue by
restoring the previous behavior.
Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ffe3b7837a2bb421df84d0177481db9f52c93a71 ]
There is a slab-out-of-bounds Write bug in hid-holtek-kbd driver.
The problem is the driver assumes the device must have an input
but some malicious devices violate this assumption.
Fix this by checking hid_device's input is non-empty before its usage.
Signed-off-by: Ma Ke <make_ruc2021@163.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23cce5f25491968b23fb9c399bbfb25f13870cd9 ]
When kernel is compiled without preemption, the eval_map_work_func()
(which calls trace_event_eval_update()) will not be preempted up to its
complete execution. This can actually cause a problem since if another
CPU call stop_machine(), the call will have to wait for the
eval_map_work_func() function to finish executing in the workqueue
before being able to be scheduled. This problem was observe on a SMP
system at boot time, when the CPU calling the initcalls executed
clocksource_done_booting() which in the end calls stop_machine(). We
observed a 1 second delay because one CPU was executing
eval_map_work_func() and was not preempted by the stop_machine() task.
Adding a call to cond_resched() in trace_event_eval_update() allows
other tasks to be executed and thus continue working asynchronously
like before without blocking any pending task at boot time.
Link: https://lore.kernel.org/linux-trace-kernel/20230929191637.416931-1-cleger@rivosinc.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 49728bdc702391902a473b9393f1620eea32acb0 ]
The 6 bytes length of the tries_buf string in ata_eh_link_report() is
too short and results in a gcc compilation warning with W-!:
drivers/ata/libata-eh.c: In function ‘ata_eh_link_report’:
drivers/ata/libata-eh.c:2371:59: warning: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 4 [-Wformat-truncation=]
2371 | snprintf(tries_buf, sizeof(tries_buf), " t%d",
| ^~
drivers/ata/libata-eh.c:2371:56: note: directive argument in the range [-2147483648, 4]
2371 | snprintf(tries_buf, sizeof(tries_buf), " t%d",
| ^~~~~~
drivers/ata/libata-eh.c:2371:17: note: ‘snprintf’ output between 4 and 14 bytes into a destination of size 6
2371 | snprintf(tries_buf, sizeof(tries_buf), " t%d",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2372 | ap->eh_tries);
| ~~~~~~~~~~~~~
Avoid this warning by increasing the string size to 16B.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e8bc2dda5a7a8e2babc9975f4b11c9a6196e490 ]
As timbgpio_irq_enable()/timbgpio_irq_disable() callback could be
executed under irq context, it could introduce double locks on
&tgpio->lock if it preempts other execution units requiring
the same locks.
timbgpio_gpio_set()
--> timbgpio_update_bit()
--> spin_lock(&tgpio->lock)
<interrupt>
--> timbgpio_irq_disable()
--> spin_lock_irqsave(&tgpio->lock)
This flaw was found by an experimental static analysis tool I am
developing for irq-related deadlock.
To prevent the potential deadlock, the patch uses spin_lock_irqsave()
on &tgpio->lock inside timbgpio_gpio_set() to prevent the possible
deadlock scenario.
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03dbab3bba5f009d053635c729d1244f2c8bad38 ]
Nathan reported that he was seeing the new warning in
setattr_copy_mgtime pop when starting podman containers. Overlayfs is
trying to set the atime and mtime via notify_change without also
setting the ctime.
POSIX states that when the atime and mtime are updated via utimes() that
we must also update the ctime to the current time. The situation with
overlayfs copy-up is analogies, so add ATTR_CTIME to the bitmask.
notify_change will fill in the value.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Message-Id: <20230913-ctime-v1-1-c6bc509cbc27@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b13e59e74ff71a1004e0508107e91e9a84fd7388 ]
I2C_CLASS_DEPRECATED is a flag and not an actual class.
There's nothing speaking against both, parent and child, having
I2C_CLASS_DEPRECATED set. Therefore exclude it from the check.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4c639f699349880b7918b861e1bd360442ec450 ]
Jens reported a compiler warning when using
CONFIG_CC_OPTIMIZE_FOR_SIZE=y that looks like this
fs/btrfs/tree-log.c: In function ‘btrfs_log_prealloc_extents’:
fs/btrfs/tree-log.c:4828:23: warning: ‘start_slot’ may be used
uninitialized [-Wmaybe-uninitialized]
4828 | ret = copy_items(trans, inode, dst_path, path,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
4829 | start_slot, ins_nr, 1, 0);
| ~~~~~~~~~~~~~~~~~~~~~~~~~
fs/btrfs/tree-log.c:4725:13: note: ‘start_slot’ was declared here
4725 | int start_slot;
| ^~~~~~~~~~
The compiler is incorrect, as we only use this code when ins_len > 0,
and when ins_len > 0 we have start_slot properly initialized. However
we generally find the -Wmaybe-uninitialized warnings valuable, so
initialize start_slot to get rid of the warning.
Reported-by: Jens Axboe <axboe@kernel.dk>
Tested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1bf76df3fee56d6637718e267f7c34ed70d0c7dc ]
When running a delayed tree reference, if we find a ref count different
from 1, we return -EIO. This isn't an IO error, as it indicates either a
bug in the delayed refs code or a memory corruption, so change the error
code from -EIO to -EUCLEAN. Also tag the branch as 'unlikely' as this is
not expected to ever happen, and change the error message to print the
tree block's bytenr without the parenthesis (and there was a missing space
between the 'block' word and the opening parenthesis), for consistency as
that's the style we used everywhere else.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ad37b5e30433afa7a5513e3eb61f69fa0976785 ]
On mapphone devices we may get lots of noise on the micro-USB port in debug
uart mode until the phy-cpcap-usb driver probes. Let's limit the noise by
using overrun-throttle-ms.
Note that there is also a related separate issue where the charger cable
connected may cause random sysrq requests until phy-cpcap-usb probes that
still remains.
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1ed72171ed580fbf159e703b77685aa4b0d0df5 ]
Like various other ASUS ExpertBook-s, the ASUS ExpertBook B1402CBA
has an ACPI DSDT table that describes IRQ 1 as ActiveLow while
the kernel overrides it to EdgeHigh.
This prevents the keyboard from working. To fix this issue, add this laptop
to the skip_override_table so that the kernel does not override IRQ 1.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217901
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05cda427126f30ce3fc8ffd82fd6f5196398d502 ]
Like the ASUS ExpertBook B2502CBA and various ASUS Vivobook laptops, the
ASUS ExpertBook B1502CBA has an ACPI DSDT table that describes IRQ 1 as
ActiveLow while the kernel overrides it to Edge_High.
$ sudo dmesg | grep DMI
DMI: ASUSTeK COMPUTER INC. ASUS EXPERTBOOK B1502CBA_B1502CBA/B1502CBA, BIOS B1502CBA.300 01/18/2023
$ grep -A 40 PS2K dsdt.dsl | grep IRQ -A 1
IRQ (Level, ActiveLow, Exclusive, )
{1}
This prevents the keyboard from working. To fix this issue, add this laptop
to the skip_override_table so that the kernel does not override IRQ 1.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217323
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: c1ed72171ed5 ("ACPI: resource: Skip IRQ override on ASUS ExpertBook B1402CBA")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77c7248882385397cd7dffe9e1437f59f32ce2de ]
Like the Asus Expertbook B2502CBA and various Asus Vivobook laptops,
the Asus Expertbook B2402CBA has an ACPI DSDT table that describes IRQ 1
as ActiveLow while the kernel overrides it to Edge_High. This prevents the
keyboard from working. To fix this issue, add this laptop to the
skip_override_table so that the kernel does not override IRQ 1.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216864
Tested-by: zelenat <zelenat@gmail.com>
Signed-off-by: Tamim Khan <tamim@fusetak.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: c1ed72171ed5 ("ACPI: resource: Skip IRQ override on ASUS ExpertBook B1402CBA")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7203481fd12b1257938519efb2460ea02b9236ee ]
The Asus ExpertBook B2502 has the same keyboard issue as Asus Vivobook
K3402ZA/K3502ZA. The kernel overrides IRQ 1 to Edge_High when it
should be Active_Low.
This patch adds the ExpertBook B2502 model to the existing
quirk list of Asus laptops with this issue.
Fixes: b5f9223a105d ("ACPI: resource: Skip IRQ override on Asus Vivobook S5602ZA")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2142574
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: c1ed72171ed5 ("ACPI: resource: Skip IRQ override on ASUS ExpertBook B1402CBA")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5f9223a105d9b56954ad1ca3eace4eaf26c99ed ]
Like the Asus Vivobook K3402ZA/K3502ZA/S5402ZA Asus Vivobook S5602ZA
has an ACPI DSDT table the describes IRQ 1 as ActiveLow while the kernel
overrides it to Edge_High. This prevents the keyboard on this laptop
from working. To fix this add this laptop to the skip_override_table so
that the kernel does not override IRQ 1.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216579
Tested-by: Dzmitry <wrkedm@gmail.com>
Signed-off-by: Tamim Khan <tamim@fusetak.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: c1ed72171ed5 ("ACPI: resource: Skip IRQ override on ASUS ExpertBook B1402CBA")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e5cbe7c4b41824e500acbb42411da692d1435f1 ]
The Asus Vivobook S5402ZA has the same keyboard issue as Asus Vivobook
K3402ZA/K3502ZA. The kernel overrides IRQ 1 to Edge_High when it
should be Active_Low.
This patch adds the S5402ZA model to the quirk list.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216158
Tested-by: Kellen Renshaw <kellen.renshaw@canonical.com>
Signed-off-by: Kellen Renshaw <kellen.renshaw@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: c1ed72171ed5 ("ACPI: resource: Skip IRQ override on ASUS ExpertBook B1402CBA")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e12dee3736731e24b1e7367f87d66ac0fcd73ce7 ]
In the ACPI DSDT table for Asus VivoBook K3402ZA/K3502ZA
IRQ 1 is described as ActiveLow; however, the kernel overrides
it to Edge_High. This prevents the internal keyboard from working
on these laptops. In order to fix this add these laptops to the
skip_override_table so that the kernel does not override IRQ 1 to
Edge_High.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216158
Reviewed-by: Hui Wang <hui.wang@canonical.com>
Tested-by: Tamim Khan <tamim@fusetak.com>
Tested-by: Sunand <sunandchakradhar@gmail.com>
Signed-off-by: Tamim Khan <tamim@fusetak.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: c1ed72171ed5 ("ACPI: resource: Skip IRQ override on ASUS ExpertBook B1402CBA")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 892a012699fc0b91a2ed6309078936191447f480 ]
After the commit 0ec4e55e9f57 ("ACPI: resources: Add checks for ACPI
IRQ override") is reverted, the keyboard on Medion laptops can't
work again.
To fix the keyboard issue, add a DMI-based override check that will
not affect other machines along the lines of prt_quirks[] in
drivers/acpi/pci_irq.c.
If similar issues are seen on other platforms, the quirk table could
be expanded in the future.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213031
BugLink: http://bugs.launchpad.net/bugs/1909814
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-by: Manuel Krause <manuelkrause@netscape.net>
Tested-by: Manuel Krause <manuelkrause@netscape.net>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: c1ed72171ed5 ("ACPI: resource: Skip IRQ override on ASUS ExpertBook B1402CBA")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c3f69b4543af0aad514c127298e5ea40392575d ]
The functionality of acpi_dev_irqresource_disabled() is same as in common
irqresource_disabled(), so drop acpi_dev_irqresource_disabled() in favour
of that function.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/1606905417-183214-4-git-send-email-john.garry@huawei.com
Stable-dep-of: c1ed72171ed5 ("ACPI: resource: Skip IRQ override on ASUS ExpertBook B1402CBA")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9806731db684a475ade1e95d166089b9edbd9da3 ]
Add a common function to set the fields for a irq resource to disabled,
which mimics what is done in acpi_dev_irqresource_disabled(), with a view
to replace that function.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/1606905417-183214-3-git-send-email-john.garry@huawei.com
Stable-dep-of: c1ed72171ed5 ("ACPI: resource: Skip IRQ override on ASUS ExpertBook B1402CBA")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1d30162f35c7a73fc2f8cdcdcdbd690bedb99d1a upstream.
Device flags are displayed incorrectly:
1) The comparison (i == F_FLOW_SEQ) is always false, because F_FLOW_SEQ
is equal to (1 << FLOW_SEQ_SHIFT) == 2048, and the maximum value
of the 'i' variable is (NR_PKT_FLAG - 1) == 17. It should be compared
with FLOW_SEQ_SHIFT.
2) Similarly to the F_IPSEC flag.
3) Also add spaces to the print end of the string literal "spi:%u"
to prevent the output from merging with the flag that follows.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: 99c6d3d20d62 ("pktgen: Remove brute-force printing of flags")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d111692a59c1470ae530cbb39bcf0346c950ecc7 upstream.
This allows to remove an expired element which is not possible in other
existing set backends, this is more noticeable if gc-interval is high so
expired elements remain in the tree. On-demand gc also does not help in
this case, because this is delete element path. Return NULL if element
has expired.
Fixes: 8d8540c4f5e0 ("netfilter: nft_set_rbtree: add timeout support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2915240eddba96b37de4c7e9a3d0ac6f9548454b upstream.
When CONFIG_IPV6=n, and building with W=1:
In file included from include/trace/define_trace.h:102,
from include/trace/events/neigh.h:255,
from net/core/net-traces.c:51:
include/trace/events/neigh.h: In function ‘trace_event_raw_event_neigh_create’:
include/trace/events/neigh.h:42:34: error: variable ‘pin6’ set but not used [-Werror=unused-but-set-variable]
42 | struct in6_addr *pin6;
| ^~~~
include/trace/trace_events.h:402:11: note: in definition of macro ‘DECLARE_EVENT_CLASS’
402 | { assign; } \
| ^~~~~~
include/trace/trace_events.h:44:30: note: in expansion of macro ‘PARAMS’
44 | PARAMS(assign), \
| ^~~~~~
include/trace/events/neigh.h:23:1: note: in expansion of macro ‘TRACE_EVENT’
23 | TRACE_EVENT(neigh_create,
| ^~~~~~~~~~~
include/trace/events/neigh.h:41:9: note: in expansion of macro ‘TP_fast_assign’
41 | TP_fast_assign(
| ^~~~~~~~~~~~~~
In file included from include/trace/define_trace.h:103,
from include/trace/events/neigh.h:255,
from net/core/net-traces.c:51:
include/trace/events/neigh.h: In function ‘perf_trace_neigh_create’:
include/trace/events/neigh.h:42:34: error: variable ‘pin6’ set but not used [-Werror=unused-but-set-variable]
42 | struct in6_addr *pin6;
| ^~~~
include/trace/perf.h:51:11: note: in definition of macro ‘DECLARE_EVENT_CLASS’
51 | { assign; } \
| ^~~~~~
include/trace/trace_events.h:44:30: note: in expansion of macro ‘PARAMS’
44 | PARAMS(assign), \
| ^~~~~~
include/trace/events/neigh.h:23:1: note: in expansion of macro ‘TRACE_EVENT’
23 | TRACE_EVENT(neigh_create,
| ^~~~~~~~~~~
include/trace/events/neigh.h:41:9: note: in expansion of macro ‘TP_fast_assign’
41 | TP_fast_assign(
| ^~~~~~~~~~~~~~
Indeed, the variable pin6 is declared and initialized unconditionally,
while it is only used and needlessly re-initialized when support for
IPv6 is enabled.
Fix this by dropping the unused variable initialization, and moving the
variable declaration inside the existing section protected by a check
for CONFIG_IPV6.
Fixes: fc651001d2c5ca4f ("neighbor: Add tracepoint to __neigh_create")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a13b67c9a015c4e21601ef9aa4ec9c5d972df1b4 upstream.
Christian Theune says:
I upgraded from 6.1.38 to 6.1.55 this morning and it broke my traffic shaping script,
leaving me with a non-functional uplink on a remote router.
A 'rt' curve cannot be used as a inner curve (parent class), but we were
allowing such configurations since the qdisc was introduced. Such
configurations would trigger a UAF as Budimir explains:
The parent will have vttree_insert() called on it in init_vf(),
but will not have vttree_remove() called on it in update_vf()
because it does not have the HFSC_FSC flag set.
The qdisc always assumes that inner classes have the HFSC_FSC flag set.
This is by design as it doesn't make sense 'qdisc wise' for an 'rt'
curve to be an inner curve.
Budimir's original patch disallows users to add classes with a 'rt'
parent, but this is too strict as it breaks users that have been using
'rt' as a inner class. Another approach, taken by this patch, is to
upgrade the inner 'rt' into a 'sc', warning the user in the process.
It avoids the UAF reported by Budimir while also being more permissive
to bad scripts/users/code using 'rt' as a inner class.
Users checking the `tc class ls [...]` or `tc class get [...]` dumps would
observe the curve change and are potentially breaking with this change.
v1->v2: https://lore.kernel.org/all/20231013151057.2611860-1-pctammela@mojatatu.com/
- Correct 'Fixes' tag and merge with revert (Jakub)
Cc: Christian Theune <ct@flyingcircus.io>
Cc: Budimir Markovic <markovicbudimir@gmail.com>
Fixes: b3d26c5702c7 ("net/sched: sch_hfsc: Ensure inner classes have fsc curve")
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20231017143602.3191556-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc6f716a5069180c40a8c9b63631e97da34f64a3 upstream.
The hardware provides the indexes of the first and the last available
queue and VF. From the indexes, the driver calculates the numbers of
queues and VFs. In theory, a faulty device might say the last index is
smaller than the first index. In that case, the driver's calculation
would underflow, it would attempt to write to non-existent registers
outside of the ioremapped range and crash.
I ran into this not by having a faulty device, but by an operator error.
I accidentally ran a QE test meant for i40e devices on an ice device.
The test used 'echo i40e > /sys/...ice PCI device.../driver_override',
bound the driver to the device and crashed in one of the wr32 calls in
i40e_clear_hw.
Add checks to prevent underflows in the calculations of num_queues and
num_vfs. With this fix, the wrong device probing reports errors and
returns a failure without crashing.
Fixes: 838d41d92a90 ("i40e: clear all queues and interrupts")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Link: https://lore.kernel.org/r/20231011233334.336092-2-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f921a4a5bffa8a0005b190fb9421a7fc1fd716b6 upstream.
In commit 75eefc6c59fd ("tcp: tsq: add a shortcut in tcp_small_queue_check()")
we allowed to send an skb regardless of TSQ limits being hit if rtx queue
was empty or had a single skb, in order to better fill the pipe
when/if TX completions were slow.
Then later, commit 75c119afe14f ("tcp: implement rb-tree based
retransmit queue") accidentally removed the special case for
one skb in rtx queue.
Stefan Wahren reported a regression in single TCP flow throughput
using a 100Mbit fec link, starting from commit 65466904b015 ("tcp: adjust
TSO packet sizes based on min_rtt"). This last commit only made the
regression more visible, because it locked the TCP flow on a particular
behavior where TSQ prevented two skbs being pushed downstream,
adding silences on the wire between each TSO packet.
Many thanks to Stefan for his invaluable help !
Fixes: 75c119afe14f ("tcp: implement rb-tree based retransmit queue")
Link: https://lore.kernel.org/netdev/7f31ddc8-9971-495e-a1f6-819df542e0af@gmx.net/
Reported-by: Stefan Wahren <wahrenst@gmx.net>
Tested-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20231017124526.4060202-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1c2709cfff1dedbb9591e989e2f001484208d914 upstream.
We discovered from packet traces of slow loss recovery on kernels with
the default HZ=250 setting (and min_rtt < 1ms) that after reordering,
when receiving a SACKed sequence range, the RACK reordering timer was
firing after about 16ms rather than the desired value of roughly
min_rtt/4 + 2ms. The problem is largely due to the RACK reorder timer
calculation adding in TCP_TIMEOUT_MIN, which is 2 jiffies. On kernels
with HZ=250, this is 2*4ms = 8ms. The TLP timer calculation has the
exact same issue.
This commit fixes the TLP transmit timer and RACK reordering timer
floor calculation to more closely match the intended 2ms floor even on
kernels with HZ=250. It does this by adding in a new
TCP_TIMEOUT_MIN_US floor of 2000 us and then converting to jiffies,
instead of the current approach of converting to jiffies and then
adding th TCP_TIMEOUT_MIN value of 2 jiffies.
Our testing has verified that on kernels with HZ=1000, as expected,
this does not produce significant changes in behavior, but on kernels
with the default HZ=250 the latency improvement can be large. For
example, our tests show that for HZ=250 kernels at low RTTs this fix
roughly halves the latency for the RACK reorder timer: instead of
mostly firing at 16ms it mostly fires at 8ms.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Fixes: bb4d991a28cc ("tcp: adjust tail loss probe timeout")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231015174700.2206872-1-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b2f750c3a80b285cd60c9346f8c96bd0a2a66cde upstream.
When either reset- or shutdown-gpio have are initially deasserted,
e.g. after a reboot - or when the hardware does not include pull-down,
there will be a short toggle of both IOs to logical 0 and back to 1.
It seems that the rfkill default is unblocked, so the driver should not
glitch to output low during probe.
It can lead e.g. to unexpected lte modem reconnect:
[1] root@localhost:~# dmesg | grep "usb 2-1"
[ 2.136124] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 21.215278] usb 2-1: USB disconnect, device number 2
[ 28.833977] usb 2-1: new SuperSpeed USB device number 3 using xhci-hcd
The glitch has been discovered on an arm64 board, now that device-tree
support for the rfkill-gpio driver has finally appeared :).
Change the flags for devm_gpiod_get_optional from GPIOD_OUT_LOW to
GPIOD_ASIS to avoid any glitches.
The rfkill driver will set the intended value during rfkill_sync_work.
Fixes: 7176ba23f8b5 ("net: rfkill: add generic gpio rfkill driver")
Signed-off-by: Josua Mayer <josua@solid-run.com>
Link: https://lore.kernel.org/r/20231004163928.14609-1-josua@solid-run.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dad4e491e30b20f4dc615c9da65d2142d703b5c2 upstream.
In esp_remove_trailer(), to avoid an unexpected result returned by
pskb_trim, we should check the return value of pskb_trim().
Signed-off-by: Ma Ke <make_ruc2021@163.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 513f61e2193350c7a345da98559b80f61aec4fa6 upstream.
In esp_remove_trailer(), to avoid an unexpected result returned by
pskb_trim, we should check the return value of pskb_trim().
Signed-off-by: Ma Ke <make_ruc2021@163.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2f3389c73832ad90b63208c0fc281ad080114c7a upstream.
Driver allocates the LL2 rx buffers from kmalloc()
area to construct the skb using slab_build_skb()
The required size allocation seems to have overlooked
for accounting both skb_shared_info size and device
placement padding bytes which results into the below
panic when doing skb_put() for a standard MTU sized frame.
skbuff: skb_over_panic: text:ffffffffc0b0225f len:1514 put:1514
head:ff3dabceaf39c000 data:ff3dabceaf39c042 tail:0x62c end:0x566
dev:<NULL>
…
skb_panic+0x48/0x4a
skb_put.cold+0x10/0x10
qed_ll2b_complete_rx_packet+0x14f/0x260 [qed]
qed_ll2_rxq_handle_completion.constprop.0+0x169/0x200 [qed]
qed_ll2_rxq_completion+0xba/0x320 [qed]
qed_int_sp_dpc+0x1a7/0x1e0 [qed]
This patch fixes this by accouting skb_shared_info and device
placement padding size bytes when allocating the buffers.
Cc: David S. Miller <davem@davemloft.net>
Fixes: 0a7fb11c23c0 ("qed: Add Light L2 support")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d351c1ea2de3e36e608fc355d8ae7d0cc80e6cd6 upstream.
mcast packets get looped back to the local machine.
Such packets have a 0-length mac header, we should treat
this like "mac header not set" and abort rule evaluation.
As-is, we just copy data from the network header instead.
Fixes: 96518518cc41 ("netfilter: add nftables")
Reported-by: Blažej Krajňák <krajnak@levonet.sk>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a16eb25b09c02a54c1c1b449d4b6cfa2cf3f013a upstream.
Per the SDM, "When the local APIC handles a performance-monitoring
counters interrupt, it automatically sets the mask flag in the LVT
performance counter register." Add this behavior to KVM's local APIC
emulation.
Failure to mask the LVTPC entry results in spurious PMIs, e.g. when
running Linux as a guest, PMI handlers that do a "late_ack" spew a large
number of "dazed and confused" spurious NMI warnings.
Fixes: f5132b01386b ("KVM: Expose a version 2 architectural PMU to a guests")
Cc: stable@vger.kernel.org
Signed-off-by: Jim Mattson <jmattson@google.com>
Tested-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20230925173448.3518223-3-mizhang@google.com
[sean: massage changelog, correct Fixes]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c6df843348d6b71ea986266c12831cb60c2cf325 upstream.
Not all regmaps have a name so make sure to check for that to avoid
dereferencing a NULL pointer when dev_get_regmap() is used to lookup a
named regmap.
Fixes: e84861fec32d ("regmap: dev_get_regmap_match(): fix string comparison")
Cc: stable@vger.kernel.org # 5.8
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231006082104.16707-1-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 242e34500a32631f85c2b4eb6cb42a368a39e54f upstream.
Since the introduction of the ice driver the code has been
double-shifting the RSS enabling field, because the define already has
shifts in it and can't have the regular pattern of "a << shiftval &
mask" applied.
Most places in the code got it right, but one line was still wrong. Fix
this one location for easy backports to stable. An in-progress patch
fixes the defines to "standard" and will be applied as part of the
regular -next process sometime after this one.
Fixes: d76a60ba7afb ("ice: Add support for VLANs and offloads")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
CC: stable@vger.kernel.org
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231010203101.406248-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9d1a3c74746428102d55371fbf74b484733937d9 upstream.
bacmp() is a wrapper around memcpy(), which contain compile-time
checks for buffer overflow. Since the hci_conn_request_evt() also calls
bt_dev_dbg() with an implicit NULL pointer check, the compiler is now
aware of a case where 'hdev' is NULL and treats this as meaning that
zero bytes are available:
In file included from net/bluetooth/hci_event.c:32:
In function 'bacmp',
inlined from 'hci_conn_request_evt' at net/bluetooth/hci_event.c:3276:7:
include/net/bluetooth/bluetooth.h:364:16: error: 'memcmp' specified bound 6 exceeds source size 0 [-Werror=stringop-overread]
364 | return memcmp(ba1, ba2, sizeof(bdaddr_t));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Add another NULL pointer check before the bacmp() to ensure the compiler
understands the code flow enough to not warn about it. Since the patch
that introduced the warning is marked for stable backports, this one
should also go that way to avoid introducing build regressions.
Fixes: 1ffc6f8cc332 ("Bluetooth: Reject connection with the device which has same BD_ADDR")
Cc: Kees Cook <keescook@chromium.org>
Cc: "Lee, Chun-Yi" <jlee@suse.com>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 35d91d95a0cd61ebb90e0246dc917fd25e519b8c upstream.
This fixes the following code style problem:
ERROR: that open brace { should be on the previous line
+ if (!bacmp(&hdev->bdaddr, &ev->bdaddr))
+ {
Fixes: 1ffc6f8cc332 ("Bluetooth: Reject connection with the device which has same BD_ADDR")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 92d4abd66f7080075793970fc8f241239e58a9e7 upstream.
When the vhci device is opened in the two-step way, i.e.: open device
then write a vendor packet with requested controller type, the device
shall respond with a vendor packet which includes HCI index of created
interface.
When the virtual HCI is created, the host sends a reset request to the
controller. This request is processed by the vhci_send_frame() function.
However, this request is send by a different thread, so it might happen
that this HCI request will be received before the vendor response is
queued in the read queue. This results in the HCI vendor response and
HCI reset request inversion in the read queue which leads to improper
behavior of btvirt:
> dmesg
[1754256.640122] Bluetooth: MGMT ver 1.22
[1754263.023806] Bluetooth: MGMT ver 1.22
[1754265.043775] Bluetooth: hci1: Opcode 0x c03 failed: -110
In order to synchronize vhci two-step open/setup process with virtual
HCI initialization, this patch adds internal lock when queuing data in
the vhci_send_frame() function.
Signed-off-by: Arkadiusz Bokowy <arkadiusz.bokowy@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c7f59461f5a78994613afc112cdd73688aef9076 upstream.
Syzbot reports a warning as follows:
WARNING: CPU: 1 PID: 26946 at net/bluetooth/hci_conn.c:619
hci_conn_timeout+0x122/0x210 net/bluetooth/hci_conn.c:619
...
Call Trace:
<TASK>
process_one_work+0x884/0x15c0 kernel/workqueue.c:2630
process_scheduled_works kernel/workqueue.c:2703 [inline]
worker_thread+0x8b9/0x1290 kernel/workqueue.c:2784
kthread+0x33c/0x440 kernel/kthread.c:388
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
</TASK>
It is because the HCI_EV_SIMPLE_PAIR_COMPLETE event handler drops
hci_conn directly without check Simple Pairing whether be enabled. But
the Simple Pairing process can only be used if both sides have the
support enabled in the host stack.
Add hci_conn_ssp_enabled() for hci_conn in HCI_EV_IO_CAPA_REQUEST and
HCI_EV_SIMPLE_PAIR_COMPLETE event handlers to fix the problem.
Fixes: 0493684ed239 ("[Bluetooth] Disable disconnect timer during Simple Pairing")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1ffc6f8cc33268731fcf9629fc4438f6db1191fc upstream.
This change is used to relieve CVE-2020-26555. The description of
the CVE:
Bluetooth legacy BR/EDR PIN code pairing in Bluetooth Core Specification
1.0B through 5.2 may permit an unauthenticated nearby device to spoof
the BD_ADDR of the peer device to complete pairing without knowledge
of the PIN. [1]
The detail of this attack is in IEEE paper:
BlueMirror: Reflections on Bluetooth Pairing and Provisioning Protocols
[2]
It's a reflection attack. The paper mentioned that attacker can induce
the attacked target to generate null link key (zero key) without PIN
code. In BR/EDR, the key generation is actually handled in the controller
which is below HCI.
A condition of this attack is that attacker should change the
BR_ADDR of his hacking device (Host B) to equal to the BR_ADDR with
the target device being attacked (Host A).
Thus, we reject the connection with device which has same BD_ADDR
both on HCI_Create_Connection and HCI_Connection_Request to prevent
the attack. A similar implementation also shows in btstack project.
[3][4]
Cc: stable@vger.kernel.org
Link: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-26555 [1]
Link: https://ieeexplore.ieee.org/abstract/document/9474325/authors#authors [2]
Link: https://github.com/bluekitchen/btstack/blob/master/src/hci.c#L3523 [3]
Link: https://github.com/bluekitchen/btstack/blob/master/src/hci.c#L7297 [4]
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 33155c4aae5260475def6f7438e4e35564f4f3ba upstream.
This change is used to relieve CVE-2020-26555. The description of the
CVE:
Bluetooth legacy BR/EDR PIN code pairing in Bluetooth Core Specification
1.0B through 5.2 may permit an unauthenticated nearby device to spoof
the BD_ADDR of the peer device to complete pairing without knowledge
of the PIN. [1]
The detail of this attack is in IEEE paper:
BlueMirror: Reflections on Bluetooth Pairing and Provisioning Protocols
[2]
It's a reflection attack. The paper mentioned that attacker can induce
the attacked target to generate null link key (zero key) without PIN
code. In BR/EDR, the key generation is actually handled in the controller
which is below HCI.
Thus, we can ignore null link key in the handler of "Link Key Notification
event" to relieve the attack. A similar implementation also shows in
btstack project. [3]
v3: Drop the connection when null link key be detected.
v2:
- Used Link: tag instead of Closes:
- Used bt_dev_dbg instead of BT_DBG
- Added Fixes: tag
Cc: stable@vger.kernel.org
Fixes: 55ed8ca10f35 ("Bluetooth: Implement link key handling for the management interface")
Link: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-26555 [1]
Link: https://ieeexplore.ieee.org/abstract/document/9474325/authors#authors [2]
Link: https://github.com/bluekitchen/btstack/blob/master/src/hci.c#L3722 [3]
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
