IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
ufshcd_cmd_inflight() is used to check whether or not a command is in
progress. Make it skip commands that have already completed by changing
the !blk_mq_request_started(rq) check into blk_mq_rq_state(rq) !=
MQ_RQ_IN_FLIGHT. We cannot rely on lrbp->cmd since lrbp->cmd is not
cleared when a command completes.
Link: https://lore.kernel.org/linux-scsi/20230517223157.1068210-3-bvanassche@acm.org/
Signed-off-by: SEO HOYOUNG <hy50.seo@samsung.com>
Link: https://lore.kernel.org/r/20240411071444.51873-1-hy50.seo@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
UFS spec version 2.1 was published more than 10 years ago. It is
vanishingly unlikely that even there are out there platforms that uses
earlier host controllers, let alone that those ancient platforms will ever
run a V6.10 kernel. To be extra cautious, leave out removal of UFSHCI 2.0
support from this patch, and just remove support of host controllers prior
to UFS2.0.
This patch removes some legacy tuning calls that no longer apply.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240410183720.908-2-avri.altman@wdc.com
Acked-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche <bvanassche@acm.org> says:
Hi Martin,
The SCSI debugfs code may show information in debugfs that is invalid.
Hence this patch series that makes sure only valid information is shown
in debugfs. Please consider this patch series for the next merge window.
Thanks,
Bart.
Link: https://lore.kernel.org/r/20240325224755.1477910-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some but not all command information is cleared by scsi_end_request().
As an example, if scsi_show_rq() is called after a SCSI command has been
allocated and before SCMD_INITIALIZED is set, .cmnd holds the CDB
of a previous command. Showing that information in debugfs is confusing.
Hence this patch that restricts the information shown in debugfs to
valid information.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240325224755.1477910-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Slightly improve code readability by introducing a helper function for
deriving the list information and by using guard() + return instead of
goto + explicit unlock + return.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240325224755.1477910-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a struct short description and a function return value to prevent
kernel-doc warnings:
scsi_transport_srp.h:77: warning: missing initial short description on line:
* struct srp_function_template
scsi_transport_srp.h:132: warning: No description found for return value of 'srp_chkready'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20240408025425.18778-9-rdunlap@infradead.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add function return value to prevent a kernel-doc warning:
scsi_transport_fc.h:780: warning: No description found for return value of 'fc_remote_port_chkready'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20240408025425.18778-8-rdunlap@infradead.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add missing function return values to prevent kernel-doc warnings:
scsi.h:75: warning: No description found for return value of 'scsi_status_is_check_condition'
scsi.h:202: warning: No description found for return value of 'scsi_status_is_good'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20240408025425.18778-7-rdunlap@infradead.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix all kernel-doc warnings in <scsi/libfcoe.h>:
libfcoe.h:163: warning: Function parameter or struct member 'ctlr' not described in 'fcoe_ctlr_priv'
libfcoe.h:163: warning: Excess function parameter 'cltr' description in 'fcoe_ctlr_priv'
libfcoe.h:163: warning: No description found for return value of 'fcoe_ctlr_priv'
libfcoe.h:218: warning: Function parameter or struct member 'fd_flags' not described in 'fcoe_fcf'
libfcoe.h:218: warning: Excess struct member 'event' description in 'fcoe_fcf'
libfcoe.h:240: warning: Function parameter or struct member 'rdata' not described in 'fcoe_rport'
libfcoe.h:273: warning: No description found for return value of 'is_fip_mode'
libfcoe.h:332: warning: Function parameter or struct member 'crc_eof_page' not described in 'fcoe_percpu_s'
libfcoe.h:332: warning: Function parameter or struct member 'lock' not described in 'fcoe_percpu_s'
libfcoe.h:332: warning: Excess struct member 'page' description in 'fcoe_percpu_s'
libfcoe.h:362: warning: Function parameter or struct member 'data_src_addr' not described in 'fcoe_port'
libfcoe.h:362: warning: Function parameter or struct member 'get_netdev' not described in 'fcoe_port'
libfcoe.h:362: warning: Excess struct member 'data_srt_addr' description in 'fcoe_port'
libfcoe.h:369: warning: No description found for return value of 'fcoe_get_netdev'
libfcoe.h:386: warning: missing initial short description on line:
* struct netdev_list
libfcoe.h:393: warning: expecting prototype for struct netdev_list. Prototype was for struct fcoe_netdev_mapping instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20240408025425.18778-6-rdunlap@infradead.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Correct kernel-doc comments for struct iser_ctrl to prevent warnings:
iser.h:76: warning: Function parameter or struct member 'read_stag' not described in 'iser_ctrl'
iser.h:76: warning: Excess struct member 'reaf_stag' description in 'iser_ctrl'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20240408025425.18778-5-rdunlap@infradead.org
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add entries for missing documentation to prevent kernel-doc warnings:
scsi_cmnd.h:365: warning: Function parameter or struct member 'cmd' not described in 'scsi_msg_to_host_byte'
scsi_cmnd.h:365: warning: Function parameter or struct member 'msg' not described in 'scsi_msg_to_host_byte'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20240408025425.18778-4-rdunlap@infradead.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
- Change http to https where the latter works
- Drop references to I2O (Intelligent I/O)
- Use lore.kernel.org instead of marc.info for email links
- Update the location of the scsi_debug documentation
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20240408025425.18778-3-rdunlap@infradead.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
- Update the format (txt to rst) and location of this document
(archive.org to docs.kernel.org)
- Change url to URL
- Spell out "lk" (Linux Kernel)
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20240408025425.18778-2-rdunlap@infradead.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Per filesystems/sysfs.rst, show() should only use sysfs_emit() or
sysfs_emit_at() when formatting the value to be returned to user space.
coccinelle complains that there are still a couple of functions that use
snprintf(). Convert them to sysfs_emit().
sprintf() and scnprintf() will be converted as well if they have.
Generally, this patch is generated by
make coccicheck M=<path/to/file> MODE=patch \
COCCI=scripts/coccinelle/api/device_attr_show.cocci
No functional change intended
CC: Karan Tilak Kumar <kartilak@cisco.com>
CC: Sesidhar Baddela <sebaddel@cisco.com>
CC: James E.J. Bottomley <jejb@linux.ibm.com>
CC: Martin K. Petersen <martin.petersen@oracle.com>
CC: linux-scsi@vger.kernel.org
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://lore.kernel.org/r/20240319063132.1588443-12-lizhijian@fujitsu.com
Reviewed-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pointer currTar_Info is being assigned a value that is never read, it is
being re-assigned a few lines later in the start of a following do-while
loop. The assignment is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240406155029.2593439-1-colin.i.king@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix indentation of config option's help text by adding leading spaces.
Generally help text is indented by two more spaces beyond the leading tab
<\t> character. It helps Kconfig parsers to read file without error.
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Link: https://lore.kernel.org/r/20240408050110.3679890-1-ppandit@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix indentation of config option's help text by adding leading spaces.
Generally help text is indented by couple of spaces more beyond the leading
tab <\t> character. It helps Kconfig parsers to read file without error.
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Link: https://lore.kernel.org/r/20240321112438.1759347-1-ppandit@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix indentation of megaraid options help text by adding leading spaces.
Generally help text is indented by couple of spaces more beyond the leading
tab <\t> character.
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Link: https://lore.kernel.org/r/20240311121127.1281159-1-ppandit@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Calling a function through an incompatible pointer type causes breaks kcfi,
so clang warns about the assignments:
drivers/scsi/cxlflash/main.c:3498:3: error: cast from 'int (*)(struct cxlflash_cfg *, struct ht_cxlflash_lun_provision *)' to 'hioctl' (aka 'int (*)(struct cxlflash_cfg *, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
3498 | (hioctl)cxlflash_lun_provision },
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/cxlflash/main.c:3500:3: error: cast from 'int (*)(struct cxlflash_cfg *, struct ht_cxlflash_afu_debug *)' to 'hioctl' (aka 'int (*)(struct cxlflash_cfg *, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
3500 | (hioctl)cxlflash_afu_debug },
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Address these by changing the functions to have the correct type and
replace the function pointer cast with a cast of its argument.
Link: https://lore.kernel.org/lkml/20240326145140.3257163-6-arnd@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240404161524.3473857-1-arnd@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Let's add the checks to warn the user if the ICC scaling is not supported
for the gear/lane values and also fallback to the max value if that's the
case.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240403-ufs-icc-fix-v2-2-958412a5eb45@linaro.org
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> says:
Hello,
this series fixes the same issue in four drivers. The warning is a false
positive and to suppress it the driver structs are marked with
__refdata and a comment is added to describe the (non-trivial)
situation.
Best regards
Uwe
Link: https://lore.kernel.org/r/cover.1711746359.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
As described in the added code comment, a reference to .exit.text is ok for
drivers registered via module_platform_driver_probe(). Make this explicit
to prevent the following section mismatch warning
WARNING: modpost: drivers/scsi/mac_scsi: section mismatch in reference: mac_scsi_driver+0x8 (section: .data) -> mac_scsi_remove (section: .exit.text)
that triggers on an allmodconfig W=1 build.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/e41d10906948a980e985f6065485445d9bbbd2f7.1711746359.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
As described in the added code comment, a reference to .exit.text is ok for
drivers registered via module_platform_driver_probe(). Make this explicit
to prevent the following section mismatch warning
WARNING: modpost: drivers/scsi/atari_scsi: section mismatch in reference: atari_scsi_driver+0x8 (section: .data) -> atari_scsi_remove (section: .exit.text)
that triggers on an allmodconfig W=1 build.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/0170bda7ac0be3d8b694dca1b2f079fb17d9539b.1711746359.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
As described in the added code comment, a reference to .exit.text is ok for
drivers registered via module_platform_driver_probe(). Make this explicit
to prevent the following section mismatch warning
WARNING: modpost: drivers/scsi/a4000t: section mismatch in reference: amiga_a4000t_scsi_driver+0x8 (section: .data) -> amiga_a4000t_scsi_remove (section: .exit.text)
that triggers on an allmodconfig W=1 build.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/743c3cfaf12b9f61f66afa5529ac126c856e4d11.1711746359.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
As described in the added code comment, a reference to .exit.text is ok for
drivers registered via module_platform_driver_probe(). Make this explicit
to prevent the following section mismatch warning
WARNING: modpost: drivers/scsi/a3000: section mismatch in reference: amiga_a3000_scsi_driver+0x8 (section: .data) -> amiga_a3000_scsi_remove (section: .exit.text)
that triggers on an allmodconfig W=1 build.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/c7222ad7f0baaff78b19f16e789726d42515f025.1711746359.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Andrew Halaney <ahalaney@redhat.com> says:
Please review with care as I'm not all that confident in this subject.
UFS has a lot of mb() variants used, most with comments saying "ensure
this takes effect before continuing". mb()'s aren't really the way to
guarantee that, a read back is the best method.
Some of these though I think could go a step further and remove the
mb() variant without a read back. As far as I can tell there's no real
reason to ensure it takes effect in most cases (there's no delay() or
anything afterwards, and eventually another readl()/writel() happens
which is by definition ordered). Some of the patches in this series do
that if I was confident it was safe (or a reviewer pointed out prior
that they thought it was safe to do so).
Thanks in advance for the help,
Andrew
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-0-181252004586@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently a wmb() is used to ensure that writes to the
UTP_TASK_REQ_LIST_BASE* regs are completed prior to following writes to
the run/stop registers.
wmb() ensures that the write completes, but completion doesn't mean that
it isn't stored in a buffer somewhere. The recommendation for
ensuring the bits have taken effect on the device is to perform a read
back to force it to make it all the way to the device. This is
documented in device-io.rst and a talk by Will Deacon on this can
be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
But, none of that is necessary here. All of the writel()/readl()'s here
are to the same endpoint, so they will be ordered. There's no subsequent
delay() etc that requires it to have taken effect already, so no
readback is necessary here.
For that reason just drop the wmb() altogether.
Fixes: 897efe628d7e ("scsi: ufs: add missing memory barriers")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-11-181252004586@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, the doorbell is written to and a wmb() is used to commit it
immediately.
wmb() ensures that the write completes before following writes occur, but
completion doesn't mean that it isn't stored in a buffer somewhere. The
recommendation for ensuring this bit has taken effect on the device is to
perform a read back to force it to make it all the way to the device. This
is documented in device-io.rst and a talk by Will Deacon on this can be
seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
But, completion and taking effect aren't necessary to guarantee here.
There's already other examples of the doorbell being rung that don't do
this. The writel() of the doorbell guarantees prior writes by this thread
(to the request being setup for example) complete prior to the ringing of
the doorbell, and the following wait_for_completion_io_timeout() doesn't
require any special memory barriers either.
With that in mind, just remove the wmb() altogether here.
Fixes: ad1a1b9cd67a ("scsi: ufs: commit descriptors before setting the doorbell")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-10-181252004586@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, the UIC_COMMAND_COMPL interrupt is disabled and a wmb() is used
to complete the register write before any following writes.
wmb() ensures the writes complete in that order, but completion doesn't
mean that it isn't stored in a buffer somewhere. The recommendation for
ensuring this bit has taken effect on the device is to perform a read back
to force it to make it all the way to the device. This is documented in
device-io.rst and a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bit hits the device. Because the wmb()'s
purpose wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Fixes: d75f7fe495cf ("scsi: ufs: reduce the interrupts for power mode change requests")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-9-181252004586@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, interrupts are cleared and disabled prior to registering the
interrupt. An mb() is used to complete the clear/disable writes before the
interrupt is registered.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring these
bits have taken effect on the device is to perform a read back to force it
to make it all the way to the device. This is documented in device-io.rst
and a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure these bits hit the device. Because the mb()'s
purpose wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Fixes: 199ef13cac7d ("scsi: ufs: avoid spurious UFS host controller interrupts")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-8-181252004586@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, the UTP_TASK_REQ_LIST_BASE_L/UTP_TASK_REQ_LIST_BASE_H regs are
written to and then completed with an mb().
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring these
bits have taken effect on the device is to perform a read back to force it
to make it all the way to the device. This is documented in device-io.rst
and a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bits hit the device. Because the mb()'s purpose
wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Fixes: 88441a8d355d ("scsi: ufs: core: Add hibernation callbacks")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-7-181252004586@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, HCLKDIV is written to and then completed with an mb().
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bit hits the device. Because the mb()'s purpose
wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Fixes: d90996dae8e4 ("scsi: ufs: Add UFS platform driver for Cadence UFS")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-6-181252004586@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, the CGC enable bit is written and then an mb() is used to ensure
that completes before continuing.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bit hits the device. Because the mb()'s purpose
wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Fixes: 81c0fc51b7a7 ("ufs-qcom: add support for Qualcomm Technologies Inc platforms")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-5-181252004586@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, the QUNIPRO_SEL bit is written to and then an mb() is used to
ensure that completes before continuing.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
But, there's really no reason to even ensure completion before
continuing. The only requirement here is that this write is ordered to this
endpoint (which readl()/writel() guarantees already). For that reason the
mb() can be dropped altogether without anything forcing completion.
Fixes: f06fcc7155dc ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-4-181252004586@redhat.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, the testbus configuration is written and completed with an mb().
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
But, there's really no reason to even ensure completion before
continuing. The only requirement here is that this write is ordered to this
endpoint (which readl()/writel() guarantees already). For that reason the
mb() can be dropped altogether without anything forcing completion.
Fixes: 9c46b8676271 ("scsi: ufs-qcom: dump additional testbus registers")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-3-181252004586@redhat.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently after writing to REG_UFS_SYS1CLK_1US a mb() is used to ensure
that write has gone through to the device.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bit hits the device. Because the mb()'s purpose
wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Fixes: f06fcc7155dc ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations")
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-2-181252004586@redhat.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, the reset bit for the UFS provided reset controller (used by its
phy) is written to, and then a mb() happens to try and ensure that hit the
device. Immediately afterwards a usleep_range() occurs.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bit hits the device. By doing so and
guaranteeing the ordering against the immediately following usleep_range(),
the mb() can safely be removed.
Fixes: 81c0fc51b7a7 ("ufs-qcom: add support for Qualcomm Technologies Inc platforms")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-1-181252004586@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Modules registering driver with scsi_driver_register() might forget to set
.owner field. The field is used by some of other kernel parts for
reference counting (try_module_get()), so it is expected that drivers will
set it.
Solve the problem by moving this task away from the drivers to the core
scsi code, just like we did for platform_driver in commit 9447057eaff8
("platform_device: use a macro instead of platform_driver_register").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240328-b4-module-owner-scsi-v1-1-c86cb4f6e91c@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit b4d3ddd2df75 ("scsi: libsas: Define NCQ Priority sysfs attributes
for SATA devices") introduced support for ATA NCQ priority control for ATA
devices managed by libsas. This commit introduces the ncq_prio_supported
and ncq_prio_enable sysfs device attributes to discover and control the use
of this features, similarly to libata. However, libata publicly declares
these device attributes and export them for use in ATA low level
drivers. This leads to a compilation error when libsas and libata are
built-in due to the double definition:
ld: drivers/ata/libata-sata.o:/home/Linux/scsi/drivers/ata/libata-sata.c:900:
multiple definition of `dev_attr_ncq_prio_supported';
drivers/scsi/libsas/sas_ata.o:/home/Linux/scsi/drivers/scsi/libsas/sas_ata.c:984:
first defined here
ld: drivers/ata/libata-sata.o:/home/Linux/scsi/drivers/ata/libata-sata.c:1026:
multiple definition of `dev_attr_ncq_prio_enable';
drivers/scsi/libsas/sas_ata.o:/home/Linux/scsi/drivers/scsi/libsas/sas_ata.c:1022:
first defined here
Resolve this problem by directly declaring the libsas attributes instead of
using the DEVICE_ATTR() macro. And for good measure, the device attribute
variables are also renamed.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: b4d3ddd2df75 ("scsi: libsas: Define NCQ Priority sysfs attributes for SATA devices")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240327020122.439424-1-dlemoal@kernel.org
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add mtcmos control function and config.
Signed-off-by: Alice Chao <alice.chao@mediatek.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Acked-by: Chun-Hung Wu <Chun-Hung.Wu@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20240315083448.7185-8-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reset mphy when resetting host. Backup mphy setting after mphy reset
control get. Restore mphy setting after mphy reset.
Acked-by: Chun-Hung Wu <Chun-Hung.Wu@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20240315083448.7185-7-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
