967901 Commits

Author SHA1 Message Date
Mel Gorman
13d5a5e9f9 sched/fair: Clear SMT siblings after determining the core is not idle
The clearing of SMT siblings from the SIS mask before checking for an idle
core is a small but unnecessary cost. Defer the clearing of the siblings
until the scan moves to the next potential target. The cost of this was
not measured as it is borderline noise but it should be self-evident.

Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20201130144020.GS3371@techsingularity.net
2020-12-11 10:30:38 +01:00
Mauro Carvalho Chehab
59a74b1544 sched: Fix kernel-doc markup
Kernel-doc requires that a kernel-doc markup to be immediately
below the function prototype, as otherwise it will rename it.
So, move sys_sched_yield() markup to the right place.

Also fix the cpu_util() markup: Kernel-doc markups
should use this format:
        identifier - description

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/50cd6f460aeb872ebe518a8e9cfffda2df8bdb0a.1606823973.git.mchehab+huawei@kernel.org
2020-12-11 10:30:31 +01:00
Giovanni Gherdovich
3149cd5530 x86: Print ratio freq_max/freq_base used in frequency invariance calculations
The value freq_max/freq_base is a fundamental component of frequency
invariance calculations. It may come from a variety of sources such as MSRs
or ACPI data, tracking it down when troubleshooting a system could be
non-trivial. It is worth saving it in the kernel logs.

 # dmesg | grep 'Estimated ratio of average max'
 [   14.024036] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1289

Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20201112182614.10700-4-ggherdovich@suse.cz
2020-12-11 10:30:23 +01:00
Giovanni Gherdovich
976df7e573 x86, sched: Use midpoint of max_boost and max_P for frequency invariance on AMD EPYC
Frequency invariant accounting calculations need the ratio
freq_curr/freq_max, but freq_max is unknown as it depends on dynamic power
allocation between cores: AMD EPYC CPUs implement "Core Performance Boost".
Three candidates are considered to estimate this value:

- maximum non-boost frequency
- maximum boost frequency
- the mid point between the above two

Experimental data on an AMD EPYC Zen2 machine slightly favors the third
option, which is applied with this patch.

The analysis uses the ondemand cpufreq governor as baseline, and compares
it with schedutil in a number of configurations. Using the freq_max value
described above offers a moderate advantage in performance and efficiency:

sugov-max (freq_max=max_boost) performs the worst on tbench: less
throughput and reduced efficiency than the other invariant-schedutil
options (see "Data Overview" below). Consider that tbench is generally a
problematic case as no schedutil version currently is better than ondemand.

sugov-P0 (freq_max=max_P) is the worst on dbench, while the other sugov's
can surpass ondemand with less filesystem latency and slightly increased
efficiency.

1. DATA OVERVIEW
2. DETAILED PERFORMANCE TABLES
3. POWER CONSUMPTION TABLE

1. DATA OVERVIEW
================

sugov-noinv : non-invariant schedutil governor
sugov-max   : invariant schedutil, freq_max=max_boost
sugov-mid   : invariant schedutil, freq_max=midpoint
sugov-P0    : invariant schedutil, freq_max=max_P
perfgov     : performance governor

driver      : acpi_cpufreq
machine     : AMD EPYC 7742 (Zen2, aka "Rome"), dual socket,
              128 cores / 256 threads, SATA SSD storage, 250G of memory,
	      XFS filesystem

Benchmarks are described in the next section.
Tilde (~) means the value is the same as baseline.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            ondemand  perfgov  sugov-noinv  sugov-max  sugov-mid  sugov-P0  better if
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
                                        PERFORMANCE RATIOS
tbench        1.00       1.44       0.90       0.87       0.93       0.93      higher
dbench        1.00       0.91       0.95       0.94       0.94       1.06      lower
kernbench     1.00       0.93       ~          ~          ~          0.97      lower
gitsource     1.00       0.66       0.97       0.96       ~          0.95      lower
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
                                    PERFORMANCE-PER-WATT RATIOS
tbench        1.00       1.16       0.84       0.84       0.88       0.85      higher
dbench        1.00       1.03       1.02       1.02       1.02       0.93      higher
kernbench     1.00       1.05       ~          ~          ~          ~         higher
gitsource     1.00       1.46       1.04       1.04       ~          1.05      higher

2. DETAILED PERFORMANCE TABLES
==============================

Benchmark          : tbench4 (i.e. dbench4 over the network, actually loopback)
Varying parameter  : number of clients
Unit               : MB/sec (higher is better)

                  5.9.0-ondemand (BASELINE)                   5.9.0-perfgov               5.9.0-sugov-noinv
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Hmean  1        427.19  +- 0.16% (        )     778.35  +- 0.10% (  82.20%)     346.92  +- 0.14% ( -18.79%)
Hmean  2        853.82  +- 0.09% (        )    1536.23  +- 0.03% (  79.93%)     694.36  +- 0.05% ( -18.68%)
Hmean  4       1657.54  +- 0.12% (        )    2938.18  +- 0.12% (  77.26%)    1362.81  +- 0.11% ( -17.78%)
Hmean  8       3301.87  +- 0.06% (        )    5679.10  +- 0.04% (  72.00%)    2693.35  +- 0.04% ( -18.43%)
Hmean  16      6139.65  +- 0.05% (        )    9498.81  +- 0.04% (  54.71%)    4889.97  +- 0.17% ( -20.35%)
Hmean  32     11170.28  +- 0.09% (        )   17393.25  +- 0.08% (  55.71%)    9104.55  +- 0.09% ( -18.49%)
Hmean  64     19322.97  +- 0.17% (        )   31573.91  +- 0.08% (  63.40%)   18552.52  +- 0.40% (  -3.99%)
Hmean  128    30383.71  +- 0.11% (        )   37416.91  +- 0.15% (  23.15%)   25938.70  +- 0.41% ( -14.63%)
Hmean  256    31143.96  +- 0.41% (        )   30908.76  +- 0.88% (  -0.76%)   29754.32  +- 0.24% (  -4.46%)
Hmean  512    30858.49  +- 0.26% (        )   38524.60  +- 1.19% (  24.84%)   42080.39  +- 0.56% (  36.37%)
Hmean  1024   39187.37  +- 0.19% (        )   36213.86  +- 0.26% (  -7.59%)   39555.98  +- 0.12% (   0.94%)

                            5.9.0-sugov-max                 5.9.0-sugov-mid                  5.9.0-sugov-P0
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Hmean  1        352.59  +- 1.03% ( -17.46%)     352.08  +- 0.75% ( -17.58%)     352.31  +- 1.48% ( -17.53%)
Hmean  2        697.32  +- 0.08% ( -18.33%)     700.16  +- 0.20% ( -18.00%)     696.79  +- 0.06% ( -18.39%)
Hmean  4       1369.88  +- 0.04% ( -17.35%)    1369.72  +- 0.07% ( -17.36%)    1365.91  +- 0.05% ( -17.59%)
Hmean  8       2696.79  +- 0.04% ( -18.33%)    2711.06  +- 0.04% ( -17.89%)    2715.10  +- 0.61% ( -17.77%)
Hmean  16      4725.03  +- 0.03% ( -23.04%)    4875.65  +- 0.02% ( -20.59%)    4953.05  +- 0.28% ( -19.33%)
Hmean  32      9231.65  +- 0.10% ( -17.36%)    8704.89  +- 0.27% ( -22.07%)   10562.02  +- 0.36% (  -5.45%)
Hmean  64     15364.27  +- 0.19% ( -20.49%)   17786.64  +- 0.15% (  -7.95%)   19665.40  +- 0.22% (   1.77%)
Hmean  128    42100.58  +- 0.13% (  38.56%)   34946.28  +- 0.13% (  15.02%)   38635.79  +- 0.06% (  27.16%)
Hmean  256    30660.23  +- 1.08% (  -1.55%)   32307.67  +- 0.54% (   3.74%)   31153.27  +- 0.12% (   0.03%)
Hmean  512    24604.32  +- 0.14% ( -20.27%)   40408.50  +- 1.10% (  30.95%)   38800.29  +- 1.23% (  25.74%)
Hmean  1024   35535.47  +- 0.28% (  -9.32%)   41070.38  +- 2.56% (   4.81%)   31308.29  +- 2.52% ( -20.11%)

Benchmark          : dbench (filesystem stressor)
Varying parameter  : number of clients
Unit               : seconds (lower is better)

NOTE-1: This dbench version measures the average latency of a set of filesystem
        operations, as we found the traditional dbench metric (throughput) to be
	misleading.
NOTE-2: Due to high variability, we partition the original dataset and apply
        statistical bootrapping (a resampling method). Accuracy is reported in the
	form of 95% confidence intervals.

                  5.9.0-ondemand (BASELINE)                   5.9.0-perfgov               5.9.0-sugov-noinv
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
SubAmean  1         98.79  +- 0.92 (        )      83.36  +- 0.82 (  15.62%)      84.82  +- 0.92 (  14.14%)
SubAmean  2        116.00  +- 0.89 (        )     102.12  +- 0.77 (  11.96%)     109.63  +- 0.89 (   5.49%)
SubAmean  4        149.90  +- 1.03 (        )     132.12  +- 0.91 (  11.86%)     143.90  +- 1.15 (   4.00%)
SubAmean  8        182.41  +- 1.13 (        )     159.86  +- 0.93 (  12.36%)     165.82  +- 1.03 (   9.10%)
SubAmean  16       237.83  +- 1.23 (        )     219.46  +- 1.14 (   7.72%)     229.28  +- 1.19 (   3.59%)
SubAmean  32       334.34  +- 1.49 (        )     309.94  +- 1.42 (   7.30%)     321.19  +- 1.36 (   3.93%)
SubAmean  64       576.61  +- 2.16 (        )     540.75  +- 2.00 (   6.22%)     551.27  +- 1.99 (   4.39%)
SubAmean  128     1350.07  +- 4.14 (        )    1205.47  +- 3.20 (  10.71%)    1280.26  +- 3.75 (   5.17%)
SubAmean  256     3444.42  +- 7.97 (        )    3698.00 +- 27.43 (  -7.36%)    3494.14  +- 7.81 (  -1.44%)
SubAmean  2048   39457.89 +- 29.01 (        )   34105.33 +- 41.85 (  13.57%)   39688.52 +- 36.26 (  -0.58%)

                            5.9.0-sugov-max                 5.9.0-sugov-mid                  5.9.0-sugov-P0
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
SubAmean  1         85.68  +- 1.04 (  13.27%)      84.16  +- 0.84 (  14.81%)      83.99  +- 0.90 (  14.99%)
SubAmean  2        108.42  +- 0.95 (   6.54%)     109.91  +- 1.39 (   5.24%)     112.06  +- 0.91 (   3.39%)
SubAmean  4        136.90  +- 1.04 (   8.67%)     137.59  +- 0.93 (   8.21%)     136.55  +- 0.95 (   8.91%)
SubAmean  8        163.15  +- 0.96 (  10.56%)     166.07  +- 1.02 (   8.96%)     165.81  +- 0.99 (   9.10%)
SubAmean  16       224.86  +- 1.12 (   5.45%)     223.83  +- 1.06 (   5.89%)     230.66  +- 1.19 (   3.01%)
SubAmean  32       320.51  +- 1.38 (   4.13%)     322.85  +- 1.49 (   3.44%)     321.96  +- 1.46 (   3.70%)
SubAmean  64       553.25  +- 1.93 (   4.05%)     554.19  +- 2.08 (   3.89%)     562.26  +- 2.22 (   2.49%)
SubAmean  128     1264.35  +- 3.72 (   6.35%)    1256.99  +- 3.46 (   6.89%)    2018.97 +- 18.79 ( -49.55%)
SubAmean  256     3466.25  +- 8.25 (  -0.63%)    3450.58  +- 8.44 (  -0.18%)    5032.12 +- 38.74 ( -46.09%)
SubAmean  2048   39133.10 +- 45.71 (   0.82%)   39905.95 +- 34.33 (  -1.14%)   53811.86 +-193.04 ( -36.38%)

Benchmark          : kernbench (kernel compilation)
Varying parameter  : number of jobs
Unit               : seconds (lower is better)

                  5.9.0-ondemand (BASELINE)                   5.9.0-perfgov               5.9.0-sugov-noinv
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Amean  2        471.71 +- 26.61% (        )     409.88 +- 16.99% (  13.11%)     430.63  +- 0.18% (   8.71%)
Amean  4        211.87  +- 0.58% (        )     194.03  +- 0.74% (   8.42%)     215.33  +- 0.64% (  -1.63%)
Amean  8        109.79  +- 1.27% (        )     101.43  +- 1.53% (   7.61%)     111.05  +- 1.95% (  -1.15%)
Amean  16        59.50  +- 1.28% (        )      55.61  +- 1.35% (   6.55%)      59.65  +- 1.78% (  -0.24%)
Amean  32        34.94  +- 1.22% (        )      32.36  +- 1.95% (   7.41%)      35.44  +- 0.63% (  -1.43%)
Amean  64        22.58  +- 0.38% (        )      20.97  +- 1.28% (   7.11%)      22.41  +- 1.73% (   0.74%)
Amean  128       17.72  +- 0.44% (        )      16.68  +- 0.32% (   5.88%)      17.65  +- 0.96% (   0.37%)
Amean  256       16.44  +- 0.53% (        )      15.76  +- 0.32% (   4.18%)      16.76  +- 0.60% (  -1.93%)
Amean  512       16.54  +- 0.21% (        )      15.62  +- 0.41% (   5.53%)      16.84  +- 0.85% (  -1.83%)

                            5.9.0-sugov-max                 5.9.0-sugov-mid                  5.9.0-sugov-P0
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Amean  2        421.30  +- 0.24% (  10.69%)     419.26  +- 0.15% (  11.12%)     414.38  +- 0.33% (  12.15%)
Amean  4  	217.81  +- 5.53% (  -2.80%)     211.63  +- 0.99% (   0.12%)     208.43  +- 0.47% (   1.63%)
Amean  8  	108.80  +- 0.43% (   0.90%)     108.48  +- 1.44% (   1.19%)     108.59  +- 3.08% (   1.09%)
Amean  16 	 58.84  +- 0.74% (   1.12%)      58.37  +- 0.94% (   1.91%)      57.78  +- 0.78% (   2.90%)
Amean  32 	 34.04  +- 2.00% (   2.59%)      34.28  +- 1.18% (   1.91%)      33.98  +- 2.21% (   2.75%)
Amean  64 	 22.22  +- 1.69% (   1.60%)      22.27  +- 1.60% (   1.38%)      22.25  +- 1.41% (   1.47%)
Amean  128	 17.55  +- 0.24% (   0.97%)      17.53  +- 0.94% (   1.04%)      17.49  +- 0.43% (   1.30%)
Amean  256	 16.51  +- 0.46% (  -0.40%)      16.48  +- 0.48% (  -0.19%)      16.44  +- 1.21% (   0.00%)
Amean  512	 16.50  +- 0.35% (   0.19%)      16.35  +- 0.42% (   1.14%)      16.37  +- 0.33% (   0.99%)

Benchmark          : gitsource (time to run the git unit test suite)
Varying parameter  : none
Unit               : seconds (lower is better)

                  5.9.0-ondemand (BASELINE)                   5.9.0-perfgov               5.9.0-sugov-noinv
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Amean          1035.76  +- 0.30% (        )     688.21  +- 0.04% (  33.56%)    1003.85  +- 0.14% (   3.08%)

                            5.9.0-sugov-max                 5.9.0-sugov-mid                  5.9.0-sugov-P0
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Amean           995.82  +- 0.08% (   3.86%)    1011.98  +- 0.03% (   2.30%)     986.87  +- 0.19% (   4.72%)

3. POWER CONSUMPTION TABLE
==========================

Average power consumption (watts).

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            ondemand  perfgov  sugov-noinv  sugov-max  sugov-mid  sugov-P0
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
tbench4     227.25     281.83     244.17     236.76     241.50     247.99
dbench4     151.97     161.87     157.08     158.10     158.06     153.73
kernbench   162.78     167.22     162.90     164.19     164.65     164.72
gitsource   133.65     139.00     133.04     134.43     134.18     134.32

Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20201112182614.10700-3-ggherdovich@suse.cz
2020-12-11 10:29:55 +01:00
Nathan Fontenot
41ea667227 x86, sched: Calculate frequency invariance for AMD systems
This is the first pass in creating the ability to calculate the
frequency invariance on AMD systems. This approach uses the CPPC
highest performance and nominal performance values that range from
0 - 255 instead of a high and base frquency. This is because we do
not have the ability on AMD to get a highest frequency value.

On AMD systems the highest performance and nominal performance
vaues do correspond to the highest and base frequencies for the system
so using them should produce an appropriate ratio but some tweaking
is likely necessary.

Due to CPPC being initialized later in boot than when the frequency
invariant calculation is currently made, I had to create a callback
from the CPPC init code to do the calculation after we have CPPC
data.

Special thanks to "kernel test robot <lkp@intel.com>" for reporting that
compilation of drivers/acpi/cppc_acpi.c is conditional to
CONFIG_ACPI_CPPC_LIB, not just CONFIG_ACPI.

[ ggherdovich@suse.cz: made safe under CPU hotplug, edited changelog. ]

Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20201112182614.10700-2-ggherdovich@suse.cz
2020-12-11 10:26:00 +01:00
Ingo Molnar
a787bdaff8 Merge branch 'linus' into sched/core, to resolve semantic conflict
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-11-27 11:10:50 +01:00
Linus Torvalds
85a2c56cb4 Power management fix for 5.10-rc6
Fix a recently introduced build issue in the cpufreq SCMI
 driver (Sudeep Holla).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl+/23ISHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxqr8P/0uRfqFXLAkFzVz4myQU7geuL7tL51DG
 G9pitNLq8j5kEF3UM74RstL/NZkg7p+VAyBFF8u9W42V2DAxfuyG6aG4rmDJbnBz
 pCvSk6RvIkneAwQ1lCYV47YRvK8rqkTcpFK5ZA2fq8oIm0bDAfkuLhsY/OoKNtJ9
 sJv/EVBpdQKA8g3H9EQzqOpUpGc6u7xG+zQEa6ZYVNpYaeSVYixsy+wRsjIktmxr
 KzmjYYYBByNz/j0jX+SIq8CJLdzDTjwsCjnh9TB1UTmr2Ii0ZCe222VTLp/uRFR/
 TrsUGuIl/XKdSRHZjiJ9RLubyjL1Z9C2Y47Va/zJ2u/C3k05baPXoU71Vdbu9hTU
 ++7hu2X2CnzCdmN0iQlifr6WchCM4NFAhWnQtbYLa+PPC/v+P2R1RYKCug5oiYnt
 LC8MiqBY7L2caMToTQZS7VYv+vG7Si9pQ6Nomyo+h+kwSAYKlLafiWsnNe2qL5y+
 WN+463tMb7aOaduigoprOn2XJlCvlw1SoKtVMsT2Yt+JinvoQLQXHUsxbd+AiKgq
 lIsmu7R3GO7X+EwN6FfWl83Dr5sD/tHcb5xvj42kHLiASSJ/xao94lFeUYnidzlW
 QBH5HavpbxgJQrKO4LsyozRqYvLv43kqjeqbGt8GoN3vzlr4ctau7cceR+30p/OX
 OTE54bBqod2D
 =QDUD
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management fix from Rafael Wysocki:
 "Fix a recently introduced build issue in the cpufreq SCMI driver
  (Sudeep Holla)"

* tag 'pm-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: scmi: Fix build for !CONFIG_COMMON_CLK
2020-11-26 11:17:37 -08:00
Feng Tang
4df910620b mm: memcg: relayout structure mem_cgroup to avoid cache interference
0day reported one -22.7% regression for will-it-scale page_fault2
case [1] on a 4 sockets 144 CPU platform, and bisected to it to be
caused by Waiman's optimization (commit bd0b230fe1) of saving one
'struct page_counter' space for 'struct mem_cgroup'.

Initially we thought it was due to the cache alignment change introduced
by the patch, but further debug shows that it is due to some hot data
members ('vmstats_local', 'vmstats_percpu', 'vmstats') sit in 2 adjacent
cacheline (2N and 2N+1 cacheline), and when adjacent cache line prefetch
is enabled, it triggers an "extended level" of cache false sharing for
2 adjacent cache lines.

So exchange the 2 member blocks, while keeping mostly the original
cache alignment, which can restore and even enhance the performance,
and save 64 bytes of space for 'struct mem_cgroup' (from 2880 to 2816,
with 0day's default RHEL-8.3 kernel config)

[1]. https://lore.kernel.org/lkml/20201102091543.GM31092@shao2-debian/

Fixes: bd0b230fe145 ("mm/memcg: unify swap and memsw page counters")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-26 09:35:49 -08:00
Linus Torvalds
fa02fcd94b media fixes for v5.10-rc6
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAl++DwMACgkQCF8+vY7k
 4RX0bBAAogUSv5MNe9kMysfNU8Vrszw1XkjRIRntLffBMgTiffQTxQ8xRtnUx3Vp
 iEsL5n/yhzq7CgT2XPP27z/KiXLmnE9psu0iD5Jr0Yq/YU4nubRMyn6GbP90m8El
 pz4FKLrX/SjJA+MFp3+Xix2MviQ+cDzKUvVsKwkCx2Qj13yBx3DM+/2vbSxGgz+S
 0VPg2zeGy+e3MP2ngK7HWjQ0MAiiitnqgit/BjqK3Q/FSLZqLn4siTKPxPfdaOCf
 ZywDFdCiVivpB+F4hkfz99vBNUM53BDZEz4xLb/Ab+Zf6cAv2Ht3TUGaK6XF73yj
 PzQPz+m/GWPSBIfH6ezYF6UhNF3i1/9+gvmGHnH23In27hMEJlL27GE3c4d1eyNh
 HRYA5h5/mc1iWpPu/7Y7ljl3VpvVC84hqoZONcYilSoNSxTXnDLg+uhWyNJ2AfRb
 vJZTIBj4zfS52DTwjOZurdG+z+GVo6Ujc5RHuFmczeOlpvwC9tEgOFQ0wySkGgJU
 wqPu992X05i1UHb/rLocUEkpyYjPCFWiJnU5SDMoDrQXgsHJFUd1NfaXQiIlxUNp
 C8taaQDjPpbeYAOQRTZDVMNvX76T6KUxp6p2ymyI7utgyBm470NJoTLZ8dndR91e
 S/LUnlVa1xzGpvrsSueFdmSekTzWVPMZCv+faXRWJt5m5NrkuEo=
 =p7nY
 -----END PGP SIGNATURE-----

Merge tag 'media/v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:

 - a rand Kconfig fixup for mtk-vcodec

 - a fix at h264 handling at cedrus codec driver

 - some warning fixes when config PM is not enabled at marvell-ccic

 - two fixes at venus codec driver: one related to codec profile and the
   other one related to a bad error path which causes an OOPS on module
   re-bind

* tag 'media/v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: venus: pm_helpers: Fix kernel module reload
  media: venus: venc: Fix setting of profile and level
  media: cedrus: h264: Fix check for presence of scaling matrix
  media: media/platform/marvell-ccic: fix warnings when CONFIG_PM is not enabled
  media: mtk-vcodec: fix build breakage when one of VPU or SCP is enabled
  media: mtk-vcodec: move firmware implementations into their own files
2020-11-25 10:35:44 -08:00
Linus Torvalds
127c501a03 Four smb3 fixes for stable
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAl+9eV4ACgkQiiy9cAdy
 T1EXOAv+JF6QZiwB6TELiusDLw+6UWpT7CcT1guL+eSrFVYEPIhqF4V4QXY0oA0Y
 F8jTpHxEx8wdECAPPNGHh/a4E+Y1vV/W8Nv5DkglAwjeXAD2Y84VAp8hH890jnn0
 M8I9qdnbfSodRueshpKScRPHbfp4Smlz1BR9R0syk7T7TmCy8aKNwYN1lBy5Nf9f
 ICMn1F5e9z4nX43NJIwzO+NSPehtLm8ULFZER/pQ+tGDhwXTdFc9HPzfu0ZoYbEO
 zADjmY4PItVYRINnWBntEBLYcAFeAB0finPTP2kCfXfRDF5cPgElp84F3Uro7se5
 bioboePO+bUS0jigIiP3qZ7zTHEdJoICsiJzVGmDZYsawK3MAwamp2EH3axAr4B/
 h4LULgN7nCatPW5lMo3/3EPZXVbXVTOYIB2REtqJugK8USQ9+v9SMLNT/qWn0GE5
 bzZoZ22wkHEOn4EIxYSCX4tgj9cJ2v9B/0NMpTQLTECKBQi3iV32GxLglvMwZru6
 eWKL5tZj
 =lxdD
 -----END PGP SIGNATURE-----

Merge tag '5.10-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
 "Four smb3 fixes for stable: one fixes a memleak, the other three
  address a problem found with decryption offload that can cause a use
  after free"

* tag '5.10-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: Handle error case during offload read path
  smb3: Avoid Mid pending list corruption
  smb3: Call cifs reconnect from demultiplex thread
  cifs: fix a memleak with modefromsid
2020-11-24 15:33:18 -08:00
Hugh Dickins
073861ed77 mm: fix VM_BUG_ON(PageTail) and BUG_ON(PageWriteback)
Twice now, when exercising ext4 looped on shmem huge pages, I have crashed
on the PF_ONLY_HEAD check inside PageWaiters(): ext4_finish_bio() calling
end_page_writeback() calling wake_up_page() on tail of a shmem huge page,
no longer an ext4 page at all.

The problem is that PageWriteback is not accompanied by a page reference
(as the NOTE at the end of test_clear_page_writeback() acknowledges): as
soon as TestClearPageWriteback has been done, that page could be removed
from page cache, freed, and reused for something else by the time that
wake_up_page() is reached.

https://lore.kernel.org/linux-mm/20200827122019.GC14765@casper.infradead.org/
Matthew Wilcox suggested avoiding or weakening the PageWaiters() tail
check; but I'm paranoid about even looking at an unreferenced struct page,
lest its memory might itself have already been reused or hotremoved (and
wake_up_page_bit() may modify that memory with its ClearPageWaiters()).

Then on crashing a second time, realized there's a stronger reason against
that approach.  If my testing just occasionally crashes on that check,
when the page is reused for part of a compound page, wouldn't it be much
more common for the page to get reused as an order-0 page before reaching
wake_up_page()?  And on rare occasions, might that reused page already be
marked PageWriteback by its new user, and already be waited upon?  What
would that look like?

It would look like BUG_ON(PageWriteback) after wait_on_page_writeback()
in write_cache_pages() (though I have never seen that crash myself).

Matthew Wilcox explaining this to himself:
 "page is allocated, added to page cache, dirtied, writeback starts,

  --- thread A ---
  filesystem calls end_page_writeback()
        test_clear_page_writeback()
  --- context switch to thread B ---
  truncate_inode_pages_range() finds the page, it doesn't have writeback set,
  we delete it from the page cache.  Page gets reallocated, dirtied, writeback
  starts again.  Then we call write_cache_pages(), see
  PageWriteback() set, call wait_on_page_writeback()
  --- context switch back to thread A ---
  wake_up_page(page, PG_writeback);
  ... thread B is woken, but because the wakeup was for the old use of
  the page, PageWriteback is still set.

  Devious"

And prior to 2a9127fcf229 ("mm: rewrite wait_on_page_bit_common() logic")
this would have been much less likely: before that, wake_page_function()'s
non-exclusive case would stop walking and not wake if it found Writeback
already set again; whereas now the non-exclusive case proceeds to wake.

I have not thought of a fix that does not add a little overhead: the
simplest fix is for end_page_writeback() to get_page() before calling
test_clear_page_writeback(), then put_page() after wake_up_page().

Was there a chance of missed wakeups before, since a page freed before
reaching wake_up_page() would have PageWaiters cleared?  I think not,
because each waiter does hold a reference on the page.  This bug comes
when the old use of the page, the one we do TestClearPageWriteback on,
had *no* waiters, so no additional page reference beyond the page cache
(and whoever racily freed it).  The reuse of the page has a waiter
holding a reference, and its own PageWriteback set; but the belated
wake_up_page() has woken the reuse to hit that BUG_ON(PageWriteback).

Reported-by: syzbot+3622cea378100f45d59f@syzkaller.appspotmail.com
Reported-by: Qian Cai <cai@lca.pw>
Fixes: 2a9127fcf229 ("mm: rewrite wait_on_page_bit_common() logic")
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: stable@vger.kernel.org # v5.8+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-24 15:23:19 -08:00
Linus Torvalds
80145ac2f7 - disable interrupts when restoring fpu and vector registers,
otherwise KVM guests might see corrupted register contents
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEECMNfWEw3SLnmiLkZIg7DeRspbsIFAl+9R6cACgkQIg7DeRsp
 bsK7Pw/8CeOCtG+MfVUugdX1AwZhA9h8IztJ5QrPmzp87rTE7spypaAahockzTpz
 GKIJUY6jWluqllOzy1K3+e5VqOSlprz6QAxCipPqP8IPc2J1Pyy7uRqOcATJ6rc+
 N1Yb4sBMtMW38c/fKSiN4DLKZ4bDZHdqAIJXDxmJC2oE1o2X0is6s7mcZje+zFz1
 jwIanfQ9J9NEz1cPeFmdTw1f5vj34M0eLGedWQn5zzomfQwmXWu/Yv1ErZzzFIIi
 Uh9U1m06j+AEKlTiotF+UHwuyfelgynbJ4uexVBglll3d68XlRjA2y12h91Y4+gB
 IxOiFQSMwZjdSKF/Js6xibpt1Wtvxu5keH9ziOu3yduLyY0SXxWQM/SRLe+Gt5Jy
 tJdR574XYbq24PLI0zFdrfjQ2npqJsIGWQDqYMCr0X+hAXz9JDZpzx7qQYRmyWIi
 37ycw2aOMtObD2CyYLX3vDDcZxNOTSxRBt7jYwwMJIfaM5hKTGomJN4itcKZZReN
 iuwPrRZq1cRNlmE6OIOHXTpFHV3hufGHJmhXmmVe5I707dS6L8CyS5XQ6EVn4rL7
 hjdvhywdljvWUg6DoXDQlG4OKMTgJneyrlZHhjoVxE9kANPmf5KJzM8Jga3BwOPO
 3Dp45LGn3lwyTzvF+DK46A9WAVi1ercteCg6yNqUzbHWFshUvOM=
 =Ry2h
 -----END PGP SIGNATURE-----

Merge tag 's390-5.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 fix from Heiko Carstens:
 "Disable interrupts when restoring fpu and vector registers, otherwise
  KVM guests might see corrupted register contents"

* tag 's390-5.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: fix fpu restore in entry.S
2020-11-24 12:15:44 -08:00
Linus Torvalds
b148942204 ARC fixes for 5.10-rc6
- More stack unwinding updates
 
  - Miscll minor fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEOXpuCuR6hedrdLCJadfx3eKKwl4FAl+8WJgACgkQadfx3eKK
 wl6Auw//SL/McHEu2qyyJBFRKbEy3Bl/ENV4m70YiSsOHt5wInSg/EDUSaw75aXK
 KQm/D1OmuAUNrjVZ07WdG5xhaOQJaBH/h9fQBpOB35XP8eEFwZA+3zp5g2q18UEM
 BLM8geOPvfB6NWN41URQF4vRitr/cz3Ru5YcqoQyQPLKBl5p6Ex1sAirW8I7m0at
 6Cddn5UUsp8sNLCoc6+kMeJgW0gP84K/FK4gD7sNsWcEQAJlhKvw0vJRCpGWKbSz
 3iLine60W6E05mvo0FA1GkPjKdE7kTOQJKHmpsOv2wAl4K27zd/2hl5VjwksEsu6
 ADG/ESnHZP39APVkvBpX5wK8HKC8r7FA0Ousec3ECEPBAkMwB5NYPqG0DQYJLD+a
 0MjIqeipWVP48weZiDBk8SLfEyRsGnfyBhDGeZxkFoExMW6OHJzBzwHz0AV0EyWd
 6yH/i0DYQXR1/ktJfpDu6rEucuM8vc61l8h0UeQPf8kKOZDKVo33efpvt7y4fXvS
 TQW3COaCW05ZwtfTedvtH/OyBGkW0iIfs085ytq1lXJqNJY5OMn9XVshU2YYPHU2
 JfoPQFi4/Ycre30DLHPbTBN7/ZYdLbDP6AkBfQtdr2PFXvccwglFVSpk3+MJ9tws
 HHNT46CpufTAuQz5pvNEDgaIsl8sLBT9MWyK2PBZYw1w0AvlA5g=
 =yPX3
 -----END PGP SIGNATURE-----

Merge tag 'arc-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull ARC fixes from Vineet Gupta:
 "A couple more stack unwinder related fixes:

   - More stack unwinding updates

   - Misc minor fixes"

* tag 'arc-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: stack unwinding: reorganize how initial register state setup
  ARC: stack unwinding: don't assume non-current task is sleeping
  ARC: mm: fix spelling mistakes
  ARC: bitops: Remove unecessary operation and value
2020-11-24 12:12:55 -08:00
Peter Zijlstra
2914b0ba61 irq_work: Optimize irq_work_single()
Trade one atomic op for a full memory barrier.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
2020-11-24 16:47:49 +01:00
Peter Zijlstra
545b8c8df4 smp: Cleanup smp_call_function*()
Get rid of the __call_single_node union and cleanup the API a little
to avoid external code relying on the structure layout as much.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
2020-11-24 16:47:49 +01:00
Peter Zijlstra
7a9f50a058 irq_work: Cleanup
Get rid of the __call_single_node union and clean up the API a little
to avoid external code relying on the structure layout as much.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
2020-11-24 16:47:48 +01:00
Mel Gorman
23e6082a52 sched: Limit the amount of NUMA imbalance that can exist at fork time
At fork time currently, a local node can be allowed to fill completely
and allow the periodic load balancer to fix the problem. This can be
problematic in cases where a task creates lots of threads that idle until
woken as part of a worker poll causing a memory bandwidth problem.

However, a "real" workload suffers badly from this behaviour. The workload
in question is mostly NUMA aware but spawns large numbers of threads
that act as a worker pool that can be called from anywhere. These need
to spread early to get reasonable behaviour.

This patch limits how much a local node can fill before spilling over
to another node and it will not be a universal win. Specifically,
very short-lived workloads that fit within a NUMA node would prefer
the memory bandwidth.

As I cannot describe the "real" workload, the best proxy measure I found
for illustration was a page fault microbenchmark. It's not representative
of the workload but demonstrates the hazard of the current behaviour.

pft timings
                                 5.10.0-rc2             5.10.0-rc2
                          imbalancefloat-v2          forkspread-v2
Amean     elapsed-1        46.37 (   0.00%)       46.05 *   0.69%*
Amean     elapsed-4        12.43 (   0.00%)       12.49 *  -0.47%*
Amean     elapsed-7         7.61 (   0.00%)        7.55 *   0.81%*
Amean     elapsed-12        4.79 (   0.00%)        4.80 (  -0.17%)
Amean     elapsed-21        3.13 (   0.00%)        2.89 *   7.74%*
Amean     elapsed-30        3.65 (   0.00%)        2.27 *  37.62%*
Amean     elapsed-48        3.08 (   0.00%)        2.13 *  30.69%*
Amean     elapsed-79        2.00 (   0.00%)        1.90 *   4.95%*
Amean     elapsed-80        2.00 (   0.00%)        1.90 *   4.70%*

This is showing the time to fault regions belonging to threads. The target
machine has 80 logical CPUs and two nodes. Note the ~30% gain when the
machine is approximately the point where one node becomes fully utilised.
The slower results are borderline noise.

Kernel building shows similar benefits around the same balance point.
Generally performance was either neutral or better in the tests conducted.
The main consideration with this patch is the point where fork stops
spreading a task so some workloads may benefit from different balance
points but it would be a risky tuning parameter.

Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20201120090630.3286-5-mgorman@techsingularity.net
2020-11-24 16:47:48 +01:00
Mel Gorman
7d2b5dd0bc sched/numa: Allow a floating imbalance between NUMA nodes
Currently, an imbalance is only allowed when a destination node
is almost completely idle. This solved one basic class of problems
and was the cautious approach.

This patch revisits the possibility that NUMA nodes can be imbalanced
until 25% of the CPUs are occupied. The reasoning behind 25% is somewhat
superficial -- it's half the cores when HT is enabled.  At higher
utilisations, balancing should continue as normal and keep things even
until scheduler domains are fully busy or over utilised.

Note that this is not expected to be a universal win. Any benchmark
that prefers spreading as wide as possible with limited communication
will favour the old behaviour as there is more memory bandwidth.
Workloads that communicate heavily in pairs such as netperf or tbench
benefit. For the tests I ran, the vast majority of workloads saw
a benefit so it seems to be a worthwhile trade-off.

Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20201120090630.3286-4-mgorman@techsingularity.net
2020-11-24 16:47:47 +01:00
Mel Gorman
5c339005f8 sched: Avoid unnecessary calculation of load imbalance at clone time
In find_idlest_group(), the load imbalance is only relevant when the group
is either overloaded or fully busy but it is calculated unconditionally.
This patch moves the imbalance calculation to the context it is required.
Technically, it is a micro-optimisation but really the benefit is avoiding
confusing one type of imbalance with another depending on the group_type
in the next patch.

No functional change.

Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20201120090630.3286-3-mgorman@techsingularity.net
2020-11-24 16:47:47 +01:00
Mel Gorman
abeae76a47 sched/numa: Rename nr_running and break out the magic number
This is simply a preparation patch to make the following patches easier
to read. No functional change.

Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20201120090630.3286-2-mgorman@techsingularity.net
2020-11-24 16:47:47 +01:00
Thomas Gleixner
74d862b682 sched: Make migrate_disable/enable() independent of RT
Now that the scheduler can deal with migrate disable properly, there is no
real compelling reason to make it only available for RT.

There are quite some code pathes which needlessly disable preemption in
order to prevent migration and some constructs like kmap_atomic() enforce
it implicitly.

Making it available independent of RT allows to provide a preemptible
variant of kmap_atomic() and makes the code more consistent in general.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Grudgingly-Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20201118204007.269943012@linutronix.de
2020-11-24 11:25:44 +01:00
Linus Torvalds
d5beb3140f hyperv-fixes for 5.10-rc6
-----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAl+7mlMTHHdlaS5saXVA
 a2VybmVsLm9yZwAKCRB2FHBfkEGgXpKGB/9IWxhNwFyV9ZLQFjF0iPC5zayeu92A
 IJ9QwHY8LrlsvofyJYFDfc+qUZiI18ECZ3haRhT4AgoWClnFm1aoH7sZyYlDg69P
 fT7+TLeqWS9qPBJiRZ8kTM+lvXhAPMYC194nijjTpVAdm+d8DP24pyaFm+3YBF/1
 nmmAtTVVPSrKc9gf2BhxxNy/S0nc3Tdxym8Dz+1PpZL55fTcLHV3wwl7EGplN0Ow
 IaRc7hxYdAu6UI84njej5JnskR3urX22f6/Wbg4gavWQWIn6XpBzqKAaN9KuL515
 QylasETdr+pZbzXdYgWin91rK01PHl6DSASkOd+2Dz0BZf1zu/zAgz1i
 =9ZQI
 -----END PGP SIGNATURE-----

Merge tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull Hyper-V fix from Wei Liu:
 "One patch from Dexuan to fix VRAM cache type in Hyper-V framebuffer
  driver"

* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  video: hyperv_fb: Fix the cache type when mapping the VRAM
2020-11-23 15:29:03 -08:00
Rafael J. Wysocki
05b8955f43 Merge branch 'cpufreq/arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull SCMI cpufreq driver fix for 5.10-rc6 from Viresh Kumar:

"This fixes a build issues with SCMI cpufreq driver in the
 !CONFIG_COMMON_CLK case."

* 'cpufreq/arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  cpufreq: scmi: Fix build for !CONFIG_COMMON_CLK
2020-11-23 12:55:01 +01:00
Sven Schnelle
1179f170b6 s390: fix fpu restore in entry.S
We need to disable interrupts in load_fpu_regs(). Otherwise an
interrupt might come in after the registers are loaded, but before
CIF_FPU is cleared in load_fpu_regs(). When the interrupt returns,
CIF_FPU will be cleared and the registers will never be restored.

The entry.S code usually saves the interrupt state in __SF_EMPTY on the
stack when disabling/restoring interrupts. sie64a however saves the pointer
to the sie control block in __SF_SIE_CONTROL, which references the same
location.  This is non-obvious to the reader. To avoid thrashing the sie
control block pointer in load_fpu_regs(), move the __SIE_* offsets eight
bytes after __SF_EMPTY on the stack.

Cc: <stable@vger.kernel.org> # 5.8
Fixes: 0b0ed657fe00 ("s390: remove critical section cleanup from entry.S")
Reported-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-23 11:52:13 +01:00
Sudeep Holla
f943849f72 cpufreq: scmi: Fix build for !CONFIG_COMMON_CLK
Commit 8410e7f3b31e ("cpufreq: scmi: Fix OPP addition failure with a
dummy clock provider") registers a dummy clock provider using
devm_of_clk_add_hw_provider. These *_hw_provider functions are defined
only when CONFIG_COMMON_CLK=y. One possible fix is to add the Kconfig
dependency, but since we plan to move away from the clock dependency
for scmi cpufreq, it is preferrable to avoid that.

Let us just conditionally compile out the offending call to
devm_of_clk_add_hw_provider. It also uses the variable 'dev' outside
of the #ifdef block to avoid build warning.

Fixes: 8410e7f3b31e ("cpufreq: scmi: Fix OPP addition failure with a dummy clock provider")
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-11-23 10:15:56 +05:30
Linus Torvalds
418baf2c28 Linux 5.10-rc5 v5.10-rc5 2020-11-22 15:36:08 -08:00
Linus Torvalds
d5530d82ef Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:

 - Various functionality / regression fixes for Logitech devices from
   Hans de Goede

 - Fix for (recently added) GPIO support in mcp2221 driver from Lars
   Povlsen

 - Power management handling fix/quirk in i2c-hid driver for certain
   BIOSes that have strange aproach to power-cycle from Hans de Goede

 - a few device ID additions and device-specific quirks

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: logitech-dj: Fix Dinovo Mini when paired with a MX5x00 receiver
  HID: logitech-dj: Fix an error in mse_bluetooth_descriptor
  HID: Add Logitech Dinovo Edge battery quirk
  HID: logitech-hidpp: Add HIDPP_CONSUMER_VENDOR_KEYS quirk for the Dinovo Edge
  HID: logitech-dj: Handle quad/bluetooth keyboards with a builtin trackpad
  HID: add HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE for Gamevice devices
  HID: mcp2221: Fix GPIO output handling
  HID: hid-sensor-hub: Fix issue with devices with no report ID
  HID: i2c-hid: Put ACPI enumerated devices in D3 on shutdown
  HID: add support for Sega Saturn
  HID: cypress: Support Varmilo Keyboards' media hotkeys
  HID: ite: Replace ABS_MISC 120/121 events with touchpad on/off keypresses
  HID: logitech-hidpp: Add PID for MX Anywhere 2
  HID: uclogic: Add ID for Trust Flex Design Tablet
2020-11-22 14:36:06 -08:00
Linus Torvalds
f4b936f5d6 A couple of scheduler fixes:
- Make the conditional update of the overutilized state work correctly by
    caching the relevant flags state before overwriting them and checking
    them afterwards.
 
  - Fix a data race in the wakeup path which caused loadavg on ARM64
    platforms to become a random number generator.
 
  - Fix the ordering of the iowaiter accounting operations so it can't be
    decremented before it is incremented.
 
  - Fix a bug in the deadline scheduler vs. priority inheritance when a
    non-deadline task A has inherited the parameters of a deadline task B
    and then blocks on a non-deadline task C.
 
    The second inheritance step used the static deadline parameters of task
    A, which are usually 0, instead of further propagating task B's
    parameters. The zero initialized parameters trigger a bug in the
    deadline scheduler.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl+6edsTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoaJCEAC7VGr9IlWRzCI/173tKAXkLRrGXHVb
 yOYc/YjLMCTcERNxqpf8uIURd/ATSHU/RMwfFcB558NedKZ/QKZDoKmLqeCXnVeM
 e20tXv/fmpqRS7lgtmbBfhQ8mSDhst960oD1mHifdEwEBCCm7mLEaipTuTWjnZ0x
 rOz70Hir1mSjsP0E7ZorsxCr1yExbrt+jZfKCe9D2kUSvlWHf1ipzAYNlqb/DsfG
 n81G7q9LYV8NUhX3lt8oSZDq0K44aO6G6fEaP4EkfwsIAOh37yPHwuEuqDZCBmXw
 rQ17XUU3jQ2MtubPvVEKG/6Z+hAUyOsAKynpq/RhzueXQm/9Ns6+qHX/xY8yh39y
 S5qPd5DLRlac8f7cFwz2zPxP5E+xTJLONgRkuN1XlitMJZBxru9AzDNa0/6on8TM
 OtvbvVR+bPUfHiHULk4fTz7fLcbgYgxbCgfGoFsVlfskOxnzgEG8WfuI2Up2rRJ0
 nr1MCER+5fprciqPPs+18rVEFiC4mQSrV01cnwrNbpW8pqibZSomMilQ0oQvcTGL
 VDEHkaDTa5YbR92Szq4rYbr7Sf0ihFU0EZUNVQnu7SujdVFxTdHb1yr8UYcYp09b
 LqGFhr1FHBNYKbw3rEPx2R/FGuCii21oQkhz94ujDo1Np8EGVZYwFGh+iwbsa2Xn
 K1u0HzqLTfTkMw==
 =HiGq
 -----END PGP SIGNATURE-----

Merge tag 'sched-urgent-2020-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull scheduler fixes from Thomas Gleixner:
 "A couple of scheduler fixes:

   - Make the conditional update of the overutilized state work
     correctly by caching the relevant flags state before overwriting
     them and checking them afterwards.

   - Fix a data race in the wakeup path which caused loadavg on ARM64
     platforms to become a random number generator.

   - Fix the ordering of the iowaiter accounting operations so it can't
     be decremented before it is incremented.

   - Fix a bug in the deadline scheduler vs. priority inheritance when a
     non-deadline task A has inherited the parameters of a deadline task
     B and then blocks on a non-deadline task C.

     The second inheritance step used the static deadline parameters of
     task A, which are usually 0, instead of further propagating task
     B's parameters. The zero initialized parameters trigger a bug in
     the deadline scheduler"

* tag 'sched-urgent-2020-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/deadline: Fix priority inheritance with multiple scheduling classes
  sched: Fix rq->nr_iowait ordering
  sched: Fix data-race in wakeup
  sched/fair: Fix overutilized update in enqueue_task_fair()
2020-11-22 13:26:07 -08:00
Linus Torvalds
48da330589 A single fix for the x86 perf sysfs interfaces which used kobject
attributes instead of device attributes and therefore making Clangs control
 flow integrity checker upset.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl+6diATHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoaVKD/9pbxJEopP0ojZx8MbGVxPn1dzgii6k
 YgWOemMPGV/hi87pCSah1RcNVY8aMwMUBnzMJEhx9bCYFMxCummM7wcoN7bJneWU
 f548CesgeKP662vFYjAXrsASX0DZAUUQm/MTnkLqVlD11yaqudxKEjEYNi2jVehq
 7tTip8Eb88w5dyQJLN7sjZuV9AdZCiXeiyGgYb3jVjfdfTuq4KRp6XdL9SghEfwV
 3qDOrcBuLKgQbz+eE2C1tVX+/kSNfG1stNAWkENHBWfrnmbeCt7YdT6Gd6bays0b
 1Ul0LgZwXbDdkQrtmoEGtI8j/Q+yiozeJY7+eeh/Z9nw0eviZ8ir36y96wRukOqw
 od+EjENiF1hIJk21r6mIuQoMyezHraIMgg0WF4/YT1XRGqwR1wqgHpmwqMjmem0Y
 Kuab7aYC4g8vGk9ah2/FmTnTHooEyk8GyxnVXO+aSdLbFI04L7HBDILvgvpHPyCS
 BnUDZE785W8yLydhKslfy92kVQGKuGaSqQUQcHD+c/L7m2AexoKrp1RJgA0gXtDj
 ilmE7KNCCbeNXt3cDep6BQzymw9YStPNSPBSv4dK73DM/Y2qKBk3RD0BfMqdCkOy
 sBqUCWRY1/q6Z+64zwDlER5Fn+KflE0ihobTxhA6m0yx7AOn9BoMDWfo3xGKw6Mn
 nhVDpafF8YuVIw==
 =xsma
 -----END PGP SIGNATURE-----

Merge tag 'perf-urgent-2020-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf fix from Thomas Gleixner:
 "A single fix for the x86 perf sysfs interfaces which used kobject
  attributes instead of device attributes and therefore making clang's
  control flow integrity checker upset"

* tag 'perf-urgent-2020-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86: fix sysfs type mismatches
2020-11-22 13:23:43 -08:00
Linus Torvalds
855cf1ee47 A single fix for lockdep which makes the recursion protection cover graph
lock/unlock.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl+6dQ4THHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoXLiD/91TaQTrgVht6NxF5CmvEpoYPzGg/TO
 MeU7GmgeXv7ciIIDaPONsCLOGjGx5dSxk1QJ5OH+GhJ/lIXbtvbVUgbs7Ezjkl4d
 SyjRHNv3wYV7VJySEgqxo+Rd6fCQN7rOf/J3ZbzPHtMl40qxSpz1FeXTRft7cn62
 pkunRKM+f/tE/Ue96tiHCQVbwRxG3LEPIuXtLJQqtPvgMzb9zhC9mZpUcr5ZJyVD
 BfX69iIs1W1XKql6yH/KuBUY9d3qRzzmhko6a2mMSL3+VX0j4o46LMlP4HRndKTT
 5fEsUC3UOItqn7X4f3HHeQhckEAKXNGEMR30th84CligiEanQuIIHNNKazsnp87A
 GT/XA8RO9+OAd5TRP4CEaFDUR0a0OOZjiw3vW6E77BObi31Se9/EO3Z7XpJC2BSl
 vTsukplOmeilyspQJT7inVgZrtUlF0lpVV5YbMLjtbn5kzLu/75GZN3JagwCmflN
 GKbix/8tnH0KrbizCE8ujUZl+aNjk2TM64mAzOXMlmg+yZ47af31hFs846tCMhv5
 JHXkiMaXpWx3PapgGHM+4PJ1WDGTxm6mUvgAcyCVWgT4gxVXsppnkn0RLdRTGQ50
 C9movzOn1K2fEe7Pp40arG0tm18l9Ukp7mqN1CL+givRKNb61Owybe6qh2qk0IWT
 DAcgdC9h2rdTqQ==
 =dsm4
 -----END PGP SIGNATURE-----

Merge tag 'locking-urgent-2020-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull locking fix from Thomas Gleixner:
 "A single fix for lockdep which makes the recursion protection cover
  graph lock/unlock"

* tag 'locking-urgent-2020-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  lockdep: Put graph lock/unlock under lock_recursion protection
2020-11-22 13:19:53 -08:00
Linus Torvalds
68d3fa235f Couple of EFI fixes for v5.10:
- fix memory leak in efivarfs driver
 - fix HYP mode issue in 32-bit ARM version of the EFI stub when built in
   Thumb2 mode
 - avoid leaking EFI pgd pages on allocation failure
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEnNKg2mrY9zMBdeK7wjcgfpV0+n0FAl+tRcoACgkQwjcgfpV0
 +n1LZQf/af1p9A0zT1nC3IrcaABceJDnD3dJuV9SD6QhFuD2Dw/Mshr+MVzDsO+3
 btvuu0r4CzQ5ajfpfcGcvBFFWbbPTwKvWQe++9Unwoz5acw7hpV5yxNwMivdaJEh
 3o4pkgpCmwtliTwiroDficO7Vlqefqf4LZd7/iQYQTnuPK3waYQBjwp9t2D9tlx7
 kXiEQDP2BDRCUrKEjlR7AHTZ156mw+UsiquAuxMCGTKBqwiELEEV6aPseqa5MmNV
 RDV1IXWdhOQyQfzg0s6vTzwGeN0JubSxHng6O9UbE+tctz4EqaaHIEsRuMBq8oLD
 Y8JeGp1ovypTJxeLE5t6eEzsfvTRsg==
 =GnmM
 -----END PGP SIGNATURE-----

Merge tag 'efi-urgent-for-v5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull EFI fixes from Borislav Petkov:
 "Forwarded EFI fixes from Ard Biesheuvel:

   - fix memory leak in efivarfs driver

   - fix HYP mode issue in 32-bit ARM version of the EFI stub when built
     in Thumb2 mode

   - avoid leaking EFI pgd pages on allocation failure"

* tag 'efi-urgent-for-v5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/x86: Free efi_pgd with free_pages()
  efivarfs: fix memory leak in efivarfs_create()
  efi/arm: set HSCTLR Thumb2 bit correctly for HVC calls from HYP
2020-11-22 13:05:48 -08:00
Linus Torvalds
7d53be55c9 * An IOMMU VT-d build fix when CONFIG_PCI_ATS=n along with a revert of
same because the proper one is going through the IOMMU tree. (Thomas Gleixner)
 
 * An Intel microcode loader fix to save the correct microcode patch to
   apply during resume. (Chen Yu)
 
 * A fix to not access user memory of other processes when dumping opcode
   bytes. (Thomas Gleixner)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAl+6QnYACgkQEsHwGGHe
 VUpMgg//cE4GvK7dFihq5iNYS16yKKgyVBLwHiHoCxQkOu4CPSf0EejTMLKPSKpA
 hS7pJm6dMYLJ7PhIKRwlQD1NYet3SHCOi1h0Y2/3rVay82Vz/As2nZRd7paEkP9k
 kiNd/Ib2uAQ9ZwCKhmLanOWDoXXFo5Fwmpw+O/zhn31Y3kBx05mc2ojXnEwCERK/
 j6GwOBkfOq+q6D7HzsfEehlX0iy2rlPSq6OUN1H/Z4w+W9zfpubLX9bhhr9RvDmS
 6Hsmwos8fM/cQXZC2oxoKUP6zeYk5lDF/Qf7hOFt3WgdCpTZP2z6uLwUL6+NXu/C
 Ms+77Cx+Loe8UaDkyxXXruiv7mZIZCnl0phZulE4ibOjzL7W7w5cEf0LHdDS7uDL
 JzZwTJlbK9RjrSp4pXR+rn+U/PdluZJYpjh/Gj8+V23QszvbDsVd55SV5+CLSTM/
 qwrNp5ffLEnIFHmW98/OQKMvNTTzBFdlltnJm7mMW2JucgfCZMx4zwY0+dZ+ocDq
 /Kt/HNCzez1jHWiS5jdZCM15KuIhPTNuTpq0ipU+UAXxZOaNtTo1st1lhKoPvTz/
 k4y7S/EibX6PK4lxBQMM3fBG/T1KK7ZMgNEN0jbhWegqEmdWtgwc57p1gVE70XUU
 f6elyUupD65TMwgio2I8sQuiNBCKfF2Wj144dxXGJnGnOoZKey8=
 =z/Gq
 -----END PGP SIGNATURE-----

Merge tag 'x86_urgent_for_v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:

 - An IOMMU VT-d build fix when CONFIG_PCI_ATS=n along with a revert of
   same because the proper one is going through the IOMMU tree (Thomas
   Gleixner)

 - An Intel microcode loader fix to save the correct microcode patch to
   apply during resume (Chen Yu)

 - A fix to not access user memory of other processes when dumping
   opcode bytes (Thomas Gleixner)

* tag 'x86_urgent_for_v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "iommu/vt-d: Take CONFIG_PCI_ATS into account"
  x86/dumpstack: Do not try to access user space code of other tasks
  x86/microcode/intel: Check patch signature before saving microcode for early loading
  iommu/vt-d: Take CONFIG_PCI_ATS into account
2020-11-22 12:55:50 -08:00
Linus Torvalds
4a51c60a11 Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
 "8 patches.

  Subsystems affected by this patch series: mm (madvise, pagemap,
  readahead, memcg, userfaultfd), kbuild, and vfs"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: fix madvise WILLNEED performance problem
  libfs: fix error cast of negative value in simple_attr_write()
  mm/userfaultfd: do not access vma->vm_mm after calling handle_userfault()
  mm: memcg/slab: fix root memcg vmstats
  mm: fix readahead_page_batch for retry entries
  mm: fix phys_to_target_node() and memory_add_physaddr_to_nid() exports
  compiler-clang: remove version check for BPF Tracing
  mm/madvise: fix memory leak from process_madvise
2020-11-22 12:14:46 -08:00
Linus Torvalds
d27637ece8 Staging/IIO fixes for 5.10-rc5
Here are some small Staging and IIO driver fixes for 5.10-rc5.  They
 include:
 	- IIO fixes for reported regressions and problems
 	- new device ids for IIO drivers
 	- new device id for rtl8723bs driver
 	- staging ralink driver Kconfig dependency fix
 	- staging mt7621-pci bus resource fix
 
 All of these have been in linux-next all week with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX7pN0A8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymnAACgrCPVrnWr2mblmLhBWYpq3LjLri0AoIsYd7FG
 138ClPlHDOjNTzKQaF5Q
 =YLIp
 -----END PGP SIGNATURE-----

Merge tag 'staging-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO fixes from Greg KH:
 "Here are some small Staging and IIO driver fixes for 5.10-rc5. They
  include:

   - IIO fixes for reported regressions and problems

   - new device ids for IIO drivers

   - new device id for rtl8723bs driver

   - staging ralink driver Kconfig dependency fix

   - staging mt7621-pci bus resource fix

  All of these have been in linux-next all week with no reported issues"

* tag 'staging-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: accel: kxcjk1013: Add support for KIOX010A ACPI DSM for setting tablet-mode
  iio: accel: kxcjk1013: Replace is_smo8500_device with an acpi_type enum
  docs: ABI: testing: iio: stm32: remove re-introduced unsupported ABI
  iio: light: fix kconfig dependency bug for VCNL4035
  iio/adc: ingenic: Fix AUX/VBAT readings when touchscreen is used
  iio/adc: ingenic: Fix battery VREF for JZ4770 SoC
  staging: rtl8723bs: Add 024c:0627 to the list of SDIO device-ids
  staging: ralink-gdma: fix kconfig dependency bug for DMA_RALINK
  staging: mt7621-pci: avoid to request pci bus resources
  iio: imu: st_lsm6dsx: set 10ms as min shub slave timeout
  counter/ti-eqep: Fix regmap max_register
  iio: adc: stm32-adc: fix a regression when using dma and irq
  iio: adc: mediatek: fix unset field
  iio: cros_ec: Use default frequencies when EC returns invalid information
2020-11-22 11:58:49 -08:00
Linus Torvalds
de75803570 TTY fixes for 5.10-rc5
Here are some small tty/serial fixes for 5.10-rc5 that resolve some
 reported issues:
 	- speakup crash when telling the kernel to use a device that
 	  isn't really there
 	- imx serial driver fixes for reported problems
 	- ar933x_uart driver fix for probe error handling path
 
 All have been in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX7pOWQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynoYACeL51JkQiL72sGLe8T+nuMzKptckEAniCgLHb0
 0IBcBzMM/PgpqmOIQRRE
 =CDRI
 -----END PGP SIGNATURE-----

Merge tag 'tty-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty fixes from Greg KH:
 "Here are some small tty/serial fixes for 5.10-rc5 that resolve some
  reported issues:

   - speakup crash when telling the kernel to use a device that isn't
     really there

   - imx serial driver fixes for reported problems

   - ar933x_uart driver fix for probe error handling path

  All have been in linux-next for a while with no reported issues"

* tag 'tty-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: ar933x_uart: disable clk on error handling path in probe
  tty: serial: imx: keep console clocks always on
  speakup: Do not let the line discipline be used several times
  tty: serial: imx: fix potential deadlock
2020-11-22 11:52:10 -08:00
Linus Torvalds
a7f07fc14f A final set of miscellaneous bug fixes for ext4
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAl+6tkoACgkQ8vlZVpUN
 gaO1xgf/aJ5chEWFEQVrdSdd+cvhuILz1Hp2iW8xdZgPeN2ovWIC3LPCTDr9FWB0
 MhpGS9avYIf8mHZgsw7HVzqUv6gPcT0khragPp348QJzxnbz/saZ5ujK/WR2zJxr
 SoB9f2vdqW0gBbKMO6avXm0gTnuNemcK5oH6tzI5ECBpV3Ltk1dJWtgQkVp9rAyP
 EFEb9hUYpdZ3J1cm8SCUIO99Tu2KMd+yNRv42z0BKNTfBNe2P5aG56p1sMYMcIr7
 BiVUrhPkbAf3gMsMDzZQE5mHZHyzJoHNHssLHWcEU/o9Wd2wZHjAEzzn9Tz49rUg
 yhYTrhLcQJcfmL0XvgrIhJaXTfMc6w==
 =s/1A
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus_fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
 "A final set of miscellaneous bug fixes for ext4"

* tag 'ext4_for_linus_fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix bogus warning in ext4_update_dx_flag()
  jbd2: fix kernel-doc markups
  ext4: drop fast_commit from /proc/mounts
2020-11-22 11:39:32 -08:00
David Howells
a9e5c87ca7 afs: Fix speculative status fetch going out of order wrt to modifications
When doing a lookup in a directory, the afs filesystem uses a bulk
status fetch to speculatively retrieve the statuses of up to 48 other
vnodes found in the same directory and it will then either update extant
inodes or create new ones - effectively doing 'lookup ahead'.

To avoid the possibility of deadlocking itself, however, the filesystem
doesn't lock all of those inodes; rather just the directory inode is
locked (by the VFS).

When the operation completes, afs_inode_init_from_status() or
afs_apply_status() is called, depending on whether the inode already
exists, to commit the new status.

A case exists, however, where the speculative status fetch operation may
straddle a modification operation on one of those vnodes.  What can then
happen is that the speculative bulk status RPC retrieves the old status,
and whilst that is happening, the modification happens - which returns
an updated status, then the modification status is committed, then we
attempt to commit the speculative status.

This results in something like the following being seen in dmesg:

	kAFS: vnode modified {100058:861} 8->9 YFS.InlineBulkStatus

showing that for vnode 861 on volume 100058, we saw YFS.InlineBulkStatus
say that the vnode had data version 8 when we'd already recorded version
9 due to a local modification.  This was causing the cache to be
invalidated for that vnode when it shouldn't have been.  If it happens
on a data file, this might lead to local changes being lost.

Fix this by ignoring speculative status updates if the data version
doesn't match the expected value.

Note that it is possible to get a DV regression if a volume gets
restored from a backup - but we should get a callback break in such a
case that should trigger a recheck anyway.  It might be worth checking
the volume creation time in the volsync info and, if a change is
observed in that (as would happen on a restore), invalidate all caches
associated with the volume.

Fixes: 5cf9dd55a0ec ("afs: Prospectively look up extra files when doing a single lookup")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-22 11:27:03 -08:00
Matthew Wilcox (Oracle)
66383800df mm: fix madvise WILLNEED performance problem
The calculation of the end page index was incorrect, leading to a
regression of 70% when running stress-ng.

With this fix, we instead see a performance improvement of 3%.

Fixes: e6e88712e43b ("mm: optimise madvise WILLNEED")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: "Chen, Rong A" <rong.a.chen@intel.com>
Link: https://lkml.kernel.org/r/20201109134851.29692-1-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-22 10:48:22 -08:00
Yicong Yang
488dac0c92 libfs: fix error cast of negative value in simple_attr_write()
The attr->set() receive a value of u64, but simple_strtoll() is used for
doing the conversion.  It will lead to the error cast if user inputs a
negative value.

Use kstrtoull() instead of simple_strtoll() to convert a string got from
the user to an unsigned value.  The former will return '-EINVAL' if it
gets a negetive value, but the latter can't handle the situation
correctly.  Make 'val' unsigned long long as what kstrtoull() takes,
this will eliminate the compile warning on no 64-bit architectures.

Fixes: f7b88631a897 ("fs/libfs.c: fix simple_attr_write() on 32bit machines")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lkml.kernel.org/r/1605341356-11872-1-git-send-email-yangyicong@hisilicon.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-22 10:48:22 -08:00
Gerald Schaefer
bfe8cc1db0 mm/userfaultfd: do not access vma->vm_mm after calling handle_userfault()
Alexander reported a syzkaller / KASAN finding on s390, see below for
complete output.

In do_huge_pmd_anonymous_page(), the pre-allocated pagetable will be
freed in some cases.  In the case of userfaultfd_missing(), this will
happen after calling handle_userfault(), which might have released the
mmap_lock.  Therefore, the following pte_free(vma->vm_mm, pgtable) will
access an unstable vma->vm_mm, which could have been freed or re-used
already.

For all architectures other than s390 this will go w/o any negative
impact, because pte_free() simply frees the page and ignores the
passed-in mm.  The implementation for SPARC32 would also access
mm->page_table_lock for pte_free(), but there is no THP support in
SPARC32, so the buggy code path will not be used there.

For s390, the mm->context.pgtable_list is being used to maintain the 2K
pagetable fragments, and operating on an already freed or even re-used
mm could result in various more or less subtle bugs due to list /
pagetable corruption.

Fix this by calling pte_free() before handle_userfault(), similar to how
it is already done in __do_huge_pmd_anonymous_page() for the WRITE /
non-huge_zero_page case.

Commit 6b251fc96cf2c ("userfaultfd: call handle_userfault() for
userfaultfd_missing() faults") actually introduced both, the
do_huge_pmd_anonymous_page() and also __do_huge_pmd_anonymous_page()
changes wrt to calling handle_userfault(), but only in the latter case
it put the pte_free() before calling handle_userfault().

  BUG: KASAN: use-after-free in do_huge_pmd_anonymous_page+0xcda/0xd90 mm/huge_memory.c:744
  Read of size 8 at addr 00000000962d6988 by task syz-executor.0/9334

  CPU: 1 PID: 9334 Comm: syz-executor.0 Not tainted 5.10.0-rc1-syzkaller-07083-g4c9720875573 #0
  Hardware name: IBM 3906 M04 701 (KVM/Linux)
  Call Trace:
    do_huge_pmd_anonymous_page+0xcda/0xd90 mm/huge_memory.c:744
    create_huge_pmd mm/memory.c:4256 [inline]
    __handle_mm_fault+0xe6e/0x1068 mm/memory.c:4480
    handle_mm_fault+0x288/0x748 mm/memory.c:4607
    do_exception+0x394/0xae0 arch/s390/mm/fault.c:479
    do_dat_exception+0x34/0x80 arch/s390/mm/fault.c:567
    pgm_check_handler+0x1da/0x22c arch/s390/kernel/entry.S:706
    copy_from_user_mvcos arch/s390/lib/uaccess.c:111 [inline]
    raw_copy_from_user+0x3a/0x88 arch/s390/lib/uaccess.c:174
    _copy_from_user+0x48/0xa8 lib/usercopy.c:16
    copy_from_user include/linux/uaccess.h:192 [inline]
    __do_sys_sigaltstack kernel/signal.c:4064 [inline]
    __s390x_sys_sigaltstack+0xc8/0x240 kernel/signal.c:4060
    system_call+0xe0/0x28c arch/s390/kernel/entry.S:415

  Allocated by task 9334:
    slab_alloc_node mm/slub.c:2891 [inline]
    slab_alloc mm/slub.c:2899 [inline]
    kmem_cache_alloc+0x118/0x348 mm/slub.c:2904
    vm_area_dup+0x9c/0x2b8 kernel/fork.c:356
    __split_vma+0xba/0x560 mm/mmap.c:2742
    split_vma+0xca/0x108 mm/mmap.c:2800
    mlock_fixup+0x4ae/0x600 mm/mlock.c:550
    apply_vma_lock_flags+0x2c6/0x398 mm/mlock.c:619
    do_mlock+0x1aa/0x718 mm/mlock.c:711
    __do_sys_mlock2 mm/mlock.c:738 [inline]
    __s390x_sys_mlock2+0x86/0xa8 mm/mlock.c:728
    system_call+0xe0/0x28c arch/s390/kernel/entry.S:415

  Freed by task 9333:
    slab_free mm/slub.c:3142 [inline]
    kmem_cache_free+0x7c/0x4b8 mm/slub.c:3158
    __vma_adjust+0x7b2/0x2508 mm/mmap.c:960
    vma_merge+0x87e/0xce0 mm/mmap.c:1209
    userfaultfd_release+0x412/0x6b8 fs/userfaultfd.c:868
    __fput+0x22c/0x7a8 fs/file_table.c:281
    task_work_run+0x200/0x320 kernel/task_work.c:151
    tracehook_notify_resume include/linux/tracehook.h:188 [inline]
    do_notify_resume+0x100/0x148 arch/s390/kernel/signal.c:538
    system_call+0xe6/0x28c arch/s390/kernel/entry.S:416

  The buggy address belongs to the object at 00000000962d6948 which belongs to the cache vm_area_struct of size 200
  The buggy address is located 64 bytes inside of 200-byte region [00000000962d6948, 00000000962d6a10)
  The buggy address belongs to the page: page:00000000313a09fe refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x962d6 flags: 0x3ffff00000000200(slab)
  raw: 3ffff00000000200 000040000257e080 0000000c0000000c 000000008020ba00
  raw: 0000000000000000 000f001e00000000 ffffffff00000001 0000000096959501
  page dumped because: kasan: bad access detected
  page->mem_cgroup:0000000096959501

  Memory state around the buggy address:
   00000000962d6880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   00000000962d6900: 00 fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb
  >00000000962d6980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                        ^
   00000000962d6a00: fb fb fc fc fc fc fc fc fc fc 00 00 00 00 00 00
   00000000962d6a80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  ==================================================================

Fixes: 6b251fc96cf2c ("userfaultfd: call handle_userfault() for userfaultfd_missing() faults")
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: <stable@vger.kernel.org>	[4.3+]
Link: https://lkml.kernel.org/r/20201110190329.11920-1-gerald.schaefer@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-22 10:48:22 -08:00
Muchun Song
8faeb1ffd7 mm: memcg/slab: fix root memcg vmstats
If we reparent the slab objects to the root memcg, when we free the slab
object, we need to update the per-memcg vmstats to keep it correct for
the root memcg.  Now this at least affects the vmstat of
NR_KERNEL_STACK_KB for !CONFIG_VMAP_STACK when the thread stack size is
smaller than the PAGE_SIZE.

David said:
 "I assume that without this fix that the root memcg's vmstat would
  always be inflated if we reparented"

Fixes: ec9f02384f60 ("mm: workingset: fix vmstat counters for shadow nodes")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yafang Shao <laoar.shao@gmail.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: <stable@vger.kernel.org>	[5.3+]
Link: https://lkml.kernel.org/r/20201110031015.15715-1-songmuchun@bytedance.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-22 10:48:22 -08:00
Matthew Wilcox (Oracle)
4349a83a31 mm: fix readahead_page_batch for retry entries
Both btrfs and fuse have reported faults caused by seeing a retry entry
instead of the page they were looking for.  This was caused by a missing
check in the iterator.

As can be seen in the below panic log, the accessing 0x402 causes a
panic.  In the xarray.h, 0x402 means RETRY_ENTRY.

  BUG: kernel NULL pointer dereference, address: 0000000000000402
  CPU: 14 PID: 306003 Comm: as Not tainted 5.9.0-1-amd64 #1 Debian 5.9.1-1
  Hardware name: Lenovo ThinkSystem SR665/7D2VCTO1WW, BIOS D8E106Q-1.01 05/30/2020
  RIP: 0010:fuse_readahead+0x152/0x470 [fuse]
  Code: 41 8b 57 18 4c 8d 54 10 ff 4c 89 d6 48 8d 7c 24 10 e8 d2 e3 28 f9 48 85 c0 0f 84 fe 00 00 00 44 89 f2 49 89 04 d4 44 8d 72 01 <48> 8b 10 41 8b 4f 1c 48 c1 ea 10 83 e2 01 80 fa 01 19 d2 81 e2 01
  RSP: 0018:ffffad99ceaebc50 EFLAGS: 00010246
  RAX: 0000000000000402 RBX: 0000000000000001 RCX: 0000000000000002
  RDX: 0000000000000000 RSI: ffff94c5af90bd98 RDI: ffffad99ceaebc60
  RBP: ffff94ddc1749a00 R08: 0000000000000402 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000100 R12: ffff94de6c429ce0
  R13: ffff94de6c4d3700 R14: 0000000000000001 R15: ffffad99ceaebd68
  FS:  00007f228c5c7040(0000) GS:ffff94de8ed80000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000402 CR3: 0000001dbd9b4000 CR4: 0000000000350ee0
  Call Trace:
    read_pages+0x83/0x270
    page_cache_readahead_unbounded+0x197/0x230
    generic_file_buffered_read+0x57a/0xa20
    new_sync_read+0x112/0x1a0
    vfs_read+0xf8/0x180
    ksys_read+0x5f/0xe0
    do_syscall_64+0x33/0x80
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 042124cc64c3 ("mm: add new readahead_control API")
Reported-by: David Sterba <dsterba@suse.com>
Reported-by: Wonhyuk Yang <vvghjk1234@gmail.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201103142852.8543-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20201103124349.16722-1-vvghjk1234@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-22 10:48:22 -08:00
Dan Williams
a927bd6ba9 mm: fix phys_to_target_node() and memory_add_physaddr_to_nid() exports
The core-mm has a default __weak implementation of phys_to_target_node()
to mirror the weak definition of memory_add_physaddr_to_nid().  That
symbol is exported for modules.  However, while the export in
mm/memory_hotplug.c exported the symbol in the configuration cases of:

	CONFIG_NUMA_KEEP_MEMINFO=y
	CONFIG_MEMORY_HOTPLUG=y

...and:

	CONFIG_NUMA_KEEP_MEMINFO=n
	CONFIG_MEMORY_HOTPLUG=y

...it failed to export the symbol in the case of:

	CONFIG_NUMA_KEEP_MEMINFO=y
	CONFIG_MEMORY_HOTPLUG=n

Not only is that broken, but Christoph points out that the kernel should
not be exporting any __weak symbol, which means that
memory_add_physaddr_to_nid() example that phys_to_target_node() copied
is broken too.

Rework the definition of phys_to_target_node() and
memory_add_physaddr_to_nid() to not require weak symbols.  Move to the
common arch override design-pattern of an asm header defining a symbol
to replace the default implementation.

The only common header that all memory_add_physaddr_to_nid() producing
architectures implement is asm/sparsemem.h.  In fact, powerpc already
defines its memory_add_physaddr_to_nid() helper in sparsemem.h.
Double-down on that observation and define phys_to_target_node() where
necessary in asm/sparsemem.h.  An alternate consideration that was
discarded was to put this override in asm/numa.h, but that entangles
with the definition of MAX_NUMNODES relative to the inclusion of
linux/nodemask.h, and requires powerpc to grow a new header.

The dependency on NUMA_KEEP_MEMINFO for DEV_DAX_HMEM_DEVICES is invalid
now that the symbol is properly exported / stubbed in all combinations
of CONFIG_NUMA_KEEP_MEMINFO and CONFIG_MEMORY_HOTPLUG.

[dan.j.williams@intel.com: v4]
  Link: https://lkml.kernel.org/r/160461461867.1505359.5301571728749534585.stgit@dwillia2-desk3.amr.corp.intel.com
[dan.j.williams@intel.com: powerpc: fix create_section_mapping compile warning]
  Link: https://lkml.kernel.org/r/160558386174.2948926.2740149041249041764.stgit@dwillia2-desk3.amr.corp.intel.com

Fixes: a035b6bf863e ("mm/memory_hotplug: introduce default phys_to_target_node() implementation")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lkml.kernel.org/r/160447639846.1133764.7044090803980177548.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-22 10:48:22 -08:00
Nick Desaulniers
bc2dc4406c compiler-clang: remove version check for BPF Tracing
bpftrace parses the kernel headers and uses Clang under the hood.

Remove the version check when __BPF_TRACING__ is defined (as bpftrace
does) so that this tool can continue to parse kernel headers, even with
older clang sources.

Fixes: commit 1f7a44f63e6c ("compiler-clang: add build check for clang 10.0.1")
Reported-by: Chen Yu <yu.chen.surf@gmail.com>
Reported-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lkml.kernel.org/r/20201104191052.390657-1-ndesaulniers@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-22 10:48:22 -08:00
Eric Dumazet
450677dcb0 mm/madvise: fix memory leak from process_madvise
The early return in process_madvise() will produce a memory leak.

Fix it.

Fixes: ecb8ac8b1f14 ("mm/madvise: introduce process_madvise() syscall: an external memory hinting API")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20201116155132.GA3805951@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-22 10:48:22 -08:00
Linus Torvalds
a349e4c659 Fixes for 5.10-rc5:
- Fix various deficiencies in online fsck's metadata checking code.
 - Fix an integer casting bug in the xattr code on 32-bit systems.
 - Fix a hang in an inode walk when the inode index is corrupt.
 - Fix error codes being dropped when initializing per-AG structures
 - Fix nowait directio writes that partially succeed but return EAGAIN.
 - Revert last week's rmap comparison patch because it was wrong.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAl+38UwACgkQ+H93GTRK
 tOtMFQ/9EV2/I673TJj8GY5gJE9mUXGbiUyMedl8XammhNPL0JZMAGsnMXBWCtjO
 0pmO+TS4epwlYpZ4XVLlxNUxUwDkxgq3nHKbEz2jezepKPTCasL7XZOECGQ1gKdA
 11BRNP7Y91ndYtVZGxHu+92oeZAzJgTh6OVYtJytniTgF9r96hgr/+3dA8GQxkqm
 bkkfWfKxxCwMYLRLRNcnVbkj0xDMgmKOILyFR63ZhW8RtrfmdIUYDUty7RGvj4bJ
 csZmrkcu/wIj+9NeXw8KS5KpNOWu2q3baORXe6EodoVgFMa4I11kiuGucZehsIbH
 yNgTLDaFNUm1aBCkSrYtz7m4iwLq8No7XB/OIXrALSd5yJqaXhDyMnEV/tBeAL7D
 MXn032Sc6hPSyGBtCmurTSo61oKP3HjgMXA4vvNw5CxJ7Q4EoZyBXCdHtZcRnB7+
 MSa+ylBTbmP/AJ2AQrPiArGlAKUTnJM6WknIBCWiIueRtadTh1cquBFVbDxoEIX5
 eKcjdQrX2xNrFNE2rRuYI4ml+wwtdgk7JO41gjAw+NA2V1LJW6Q5A5RKX2PiOidC
 oGdNPTLG7Rfh7sMaPo66X3xTQPoOwcV0O+ArXlFNDBZXDUw0d1tWzVfYo+/2Zym6
 3sFcTKMdTKtG8NasNjvbanmZTV1VLbZAJRdevH1NFAWUICiTBkY=
 =HoPI
 -----END PGP SIGNATURE-----

Merge tag 'xfs-5.10-fixes-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:
 "The critical fixes are for a crash that someone reported in the xattr
  code on 32-bit arm last week; and a revert of the rmap key comparison
  change from last week as it was totally wrong. I need a vacation. :(

  Summary:

   - Fix various deficiencies in online fsck's metadata checking code

   - Fix an integer casting bug in the xattr code on 32-bit systems

   - Fix a hang in an inode walk when the inode index is corrupt

   - Fix error codes being dropped when initializing per-AG structures

   - Fix nowait directio writes that partially succeed but return EAGAIN

   - Revert last week's rmap comparison patch because it was wrong"

* tag 'xfs-5.10-fixes-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: revert "xfs: fix rmap key and record comparison functions"
  xfs: don't allow NOWAIT DIO across extent boundaries
  xfs: return corresponding errcode if xfs_initialize_perag() fail
  xfs: ensure inobt record walks always make forward progress
  xfs: fix forkoff miscalculation related to XFS_LITINO(mp)
  xfs: directory scrub should check the null bestfree entries too
  xfs: strengthen rmap record flags checking
  xfs: fix the minrecs logic when dealing with inode root child blocks
2020-11-21 10:36:25 -08:00
Linus Torvalds
ba911108f4 \n
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAl+4JHgACgkQnJ2qBz9k
 QNlXOQf/YHs4q4HgBI0tsStS/U4xFtmY77Rcm1pllqH6BZPBg1vRpzfh7hZvIPMa
 GceTcMAX4OmG6++fRzVgNDIuem3Jl0oDCm++pWPev+S/V06PuTu36viuFWJ3e/5g
 0wDLYXRj4dRUiQtjbSkI7LAgIX1wbTANOKSZeaKFYaGHfEcFm1GkHUuHzEBVX1Jw
 bRpaod3ikmjoaoI6TTZlKKnrKksSw6F5wHUiHu2ZHdZ6kQ36elwHFu8QXJCzkZ7F
 F9vt4IIKq6xzEVdwDXAPjsFkPp2B4Bz+AgcSpoitg/2L5hc2d/kxgI4zvpXY8TGs
 hpW6YPXEXIjhHjKX22f99ThI4BqXww==
 =bBTT
 -----END PGP SIGNATURE-----

Merge tag 'fsnotify_for_v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs

Pull fanotify fix from Jan Kara:
 "A single fanotify fix from Amir"

* tag 'fsnotify_for_v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fanotify: fix logic of reporting name info with watched parent
2020-11-21 10:33:33 -08:00
Linus Torvalds
ea0ab64306 seccomp fixes for v5.10-rc5
- Fix typos in seccomp selftests on powerpc and sh (Kees Cook)
 
 - Fix PF_SUPERPRIV audit marking in seccomp and ptrace (Mickaël Salaün)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAl+4FQgACgkQiXL039xt
 wCYERA/8Cwb8p8PWbtOq6uUKsZ4kJQuMZee3crP+LM0B1a427hOCSuezoDtOY1wO
 N7IEOr3ipHxoxZ1Zf2Ln4lGyktxlwzA8pqlGZyqR5zFIl+0HArbXdAfcRMcaeqUp
 eSV30CNBD5XfGLc2R5s1qHnrshVBJFebCpgMfSCOQQWMpZ51nnaoFN8N8iSEx6PN
 kYHC1C1WX5g3vtKo29xS2Y7KCThMOXvcNI7eFpVD0C4ZwEr8lywbTTzBBhXUIGBX
 6NoNOV7kVxIjNLQ8x17F1OacrC6h4ZzNTl4MEYnMZ/Mw0NVB3MvoHQohwW+Y98Rf
 97sPQPZjYeJ6xURolRsWX+kvXC7PyLYvfldsQi00QDfdc6RGu0pnsG4UuivsldlY
 OhswE9Q/KKHmzXiHnZBmcw4NcSyhZiL3LYB1VZl3jDobeOhVKyHw72vo8Zrhhz8A
 ksCDg3vNvOo/x2iH9GSUG4Fjk8coXRif8P6lH5Btw6V+x9ZlFiaW5WbSbP0G3PzJ
 zS5nPu8PE6Sm70XlRn0BbRmIjV9AhEZqNNZoOsndrbR86klH6WolyCB4ifj2MKuR
 ZwbeDblUrYyRne/Ll9XGQVDSFv8J5phxtDQM0phiGK0jOsvXqbl8RvlckCKqBwm0
 7VgtEumU5vJTx01avrXw86Sj7B2IR4M1nTgpwWJ2EVs9U98Emew=
 =1Mse
 -----END PGP SIGNATURE-----

Merge tag 'seccomp-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull seccomp fixes from Kees Cook:
 "This gets the seccomp selftests running again on powerpc and sh, and
  fixes an audit reporting oversight noticed in both seccomp and ptrace.

   - Fix typos in seccomp selftests on powerpc and sh (Kees Cook)

   - Fix PF_SUPERPRIV audit marking in seccomp and ptrace (Mickaël
     Salaün)"

* tag 'seccomp-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  selftests/seccomp: sh: Fix register names
  selftests/seccomp: powerpc: Fix typo in macro variable name
  seccomp: Set PF_SUPERPRIV when checking capability
  ptrace: Set PF_SUPERPRIV when checking capability
2020-11-21 10:24:05 -08:00
Linus Torvalds
27bba9c532 SCSI fixes on 20201120
Fixes for two fairly obscure but annoying when triggered races in
 iSCSI.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX7gmiiYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishcJeAP4v9I6j
 fh/0E3tU+Hb8ZerNoD8p2q7vdxeKkihXWw5/EwEA2SoFW6VNTrJdhUq1+hJ1QWOR
 Awrex3uy1m11ETLgIcM=
 =A1lM
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Fixes for two fairly obscure but annoying when triggered races in
  iSCSI"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: target: iscsi: Fix cmd abort fabric stop race
  scsi: libiscsi: Fix NOP race condition
2020-11-20 16:24:28 -08:00
Linus Torvalds
4fd84bc969 block-5.10-2020-11-20
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl+4C/oQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpnlQD/40VMzxToudShz6bHyYYaJnA9TDEklQ/aUM
 rW5dyUthc7jap7bv5Yy6hRcoqXCjy77+3hBZ536q9XyX+jFZ/q34XqwHBOJ4tBwZ
 teBACT+sLxB3n41B/AecSvcG40GfINHyIONIeWc4JQmB5IqX4eX3PMIp+rsN+6yx
 IILnkZg9XULZ/IS48GBo8lgxaJHTU0qcOa20YZ3F9yY+/EsROwcy4ClyM+VUcoXe
 3jmXpYm/MucH4YIFPv0BhQI2TVQYzo2VK11YF6JgcDAJk15NNRjglCGesUwSfreZ
 45KdeXmReS5zKeJ9kSna1ifAwT7C7ag2EjHXUaDIhnqSKoClCuevv8cXb+0sk88X
 T3fifR0JKCrVcn2z8QTAVUJU9mq7+fTsj7HdwV/yuhonpiu61p1NlgThLQmamA9N
 Cm2yam/VdND6w7i5ZbR4pxDo7YAWg48WRZ5YOYPcHsXhqv6sxdrgxyX0ufK8CJaz
 ZDxcFKpG8LTjpKFhz/A5fDp06CdYWngCjE4+3ATFhNTo04pSNJ/3warPR+4n0Lb8
 KEMe+lgrwX9nQY65XPFFO5S/K1upzOmFpJQ6R6+NYJUS94IE/5pNUwSCa/kX07x4
 nniUUq6WkOR276K427iZVChUp2yc4bGTMJrZHd4Rs9OqD6IF7qhJM2G1YGrgPup6
 8pb9tB/5Tw==
 =v5pS
 -----END PGP SIGNATURE-----

Merge tag 'block-5.10-2020-11-20' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

 - NVMe pull request from Christoph:
      - Doorbell Buffer freeing fix (Minwoo Im)
      - CSE log leak fix (Keith Busch)

 - blk-cgroup hd_struct leak fix (Christoph)

 - Flush request state fix (Ming)

 - dasd NULL deref fix (Stefan)

* tag 'block-5.10-2020-11-20' of git://git.kernel.dk/linux-block:
  s390/dasd: fix null pointer dereference for ERP requests
  blk-cgroup: fix a hd_struct leak in blkcg_fill_root_iostats
  nvme: fix memory leak freeing command effects
  nvme: directly cache command effects log
  nvme: free sq/cq dbbuf pointers when dbbuf set fails
  block: mark flush request as IDLE when it is really finished
2020-11-20 12:03:40 -08:00