IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The sync_filesystem() will flush all the dirty buffer and submit the
osd reqs to the osdc and then is blocked to wait for all the reqs to
finish. But the when the reqs' replies come, the reqs will be removed
from osdc just before the req->r_callback()s are called. Which means
the sync_filesystem() will be woke up by leaving the req->r_callback()s
are still running.
This will be buggy when the waiter require the req->r_callback()s to
release some resources before continuing. So we need to make sure the
req->r_callback()s are called before removing the reqs from the osdc.
WARNING: CPU: 4 PID: 168846 at fs/crypto/keyring.c:242 fscrypt_destroy_keyring+0x7e/0xd0
CPU: 4 PID: 168846 Comm: umount Tainted: G S 6.1.0-rc5-ceph-g72ead199864c #1
Hardware name: Supermicro SYS-5018R-WR/X10SRW-F, BIOS 2.0 12/17/2015
RIP: 0010:fscrypt_destroy_keyring+0x7e/0xd0
RSP: 0018:ffffc9000b277e28 EFLAGS: 00010202
RAX: 0000000000000002 RBX: ffff88810d52ac00 RCX: ffff88810b56aa00
RDX: 0000000080000000 RSI: ffffffff822f3a09 RDI: ffff888108f59000
RBP: ffff8881d394fb88 R08: 0000000000000028 R09: 0000000000000000
R10: 0000000000000001 R11: 11ff4fe6834fcd91 R12: ffff8881d394fc40
R13: ffff888108f59000 R14: ffff8881d394f800 R15: 0000000000000000
FS: 00007fd83f6f1080(0000) GS:ffff88885fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f918d417000 CR3: 000000017f89a005 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
generic_shutdown_super+0x47/0x120
kill_anon_super+0x14/0x30
ceph_kill_sb+0x36/0x90 [ceph]
deactivate_locked_super+0x29/0x60
cleanup_mnt+0xb8/0x140
task_work_run+0x67/0xb0
exit_to_user_mode_prepare+0x23d/0x240
syscall_exit_to_user_mode+0x25/0x60
do_syscall_64+0x40/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fd83dc39e9b
We need to increase the blocker counter to make sure all the osd
requests' callbacks have been finished just before calling the
kill_anon_super() when unmounting.
Link: https://tracker.ceph.com/issues/58126
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When unmounting all the dirty buffers will be flushed and after
the last osd request is finished the last reference of the i_count
will be released. Then it will flush the dirty cap/snap to MDSs,
and the unmounting won't wait the possible acks, which will ihold
the inodes when updating the metadata locally but makes no sense
any more, of this. This will make the evict_inodes() to skip these
inodes.
If encrypt is enabled the kernel generate a warning when removing
the encrypt keys when the skipped inodes still hold the keyring:
WARNING: CPU: 4 PID: 168846 at fs/crypto/keyring.c:242 fscrypt_destroy_keyring+0x7e/0xd0
CPU: 4 PID: 168846 Comm: umount Tainted: G S 6.1.0-rc5-ceph-g72ead199864c #1
Hardware name: Supermicro SYS-5018R-WR/X10SRW-F, BIOS 2.0 12/17/2015
RIP: 0010:fscrypt_destroy_keyring+0x7e/0xd0
RSP: 0018:ffffc9000b277e28 EFLAGS: 00010202
RAX: 0000000000000002 RBX: ffff88810d52ac00 RCX: ffff88810b56aa00
RDX: 0000000080000000 RSI: ffffffff822f3a09 RDI: ffff888108f59000
RBP: ffff8881d394fb88 R08: 0000000000000028 R09: 0000000000000000
R10: 0000000000000001 R11: 11ff4fe6834fcd91 R12: ffff8881d394fc40
R13: ffff888108f59000 R14: ffff8881d394f800 R15: 0000000000000000
FS: 00007fd83f6f1080(0000) GS:ffff88885fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f918d417000 CR3: 000000017f89a005 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
generic_shutdown_super+0x47/0x120
kill_anon_super+0x14/0x30
ceph_kill_sb+0x36/0x90 [ceph]
deactivate_locked_super+0x29/0x60
cleanup_mnt+0xb8/0x140
task_work_run+0x67/0xb0
exit_to_user_mode_prepare+0x23d/0x240
syscall_exit_to_user_mode+0x25/0x60
do_syscall_64+0x40/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fd83dc39e9b
Later the kernel will crash when iput() the inodes and dereferencing
the "sb->s_master_keys", which has been released by the
generic_shutdown_super().
Link: https://tracker.ceph.com/issues/59162
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
With snapshot names encryption we can not allow snapshots to be created in
locked directories because the names wouldn't be encrypted. This patch
forces the directory to be unlocked to allow a snapshot to be created.
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Since filenames in encrypted directories are encrypted and shown as
a base64-encoded string when the directory is locked, make snapshot
names show a similar behaviour.
When creating a snapshot, .snap directories for every subdirectory will
show the snapshot name in the "long format":
# mkdir .snap/my-snap
# ls my-dir/.snap/
_my-snap_1099511627782
Encrypted snapshots will need to be able to handle these by
encrypting/decrypting only the snapshot part of the string ('my-snap').
Also, since the MDS prevents snapshot names to be bigger than 240
characters it is necessary to adapt CEPH_NOHASH_NAME_MAX to accommodate
this extra limitation.
[ idryomov: drop const on !CONFIG_FS_ENCRYPTION branch too ]
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When doing a direct/sync write, we need to invalidate the page cache in
the range being written to. If we don't do this, the cache will include
invalid data as we just did a write that avoided the page cache.
In the event that invalidation fails, just ignore the error. That likely
just means that we raced with another task doing a buffered write, in
which case we want to leave the page intact anyway.
[ jlayton: minor comment update ]
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Force the use of sparse reads when the inode is encrypted, and add the
appropriate code to decrypt the extent map after receiving.
Note that the crypto block may be smaller than a page, but the reverse
cannot be true.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Allow writepage to issue encrypted writes. Extend out the requested size
and offset to cover complete blocks, and then encrypt and write them to
the OSDs.
Add the appropriate machinery to write back dirty data with encryption.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When doing a synchronous write on an encrypted inode, we have no
guarantee that the caller is writing crypto block-aligned data. When
that happens, we must do a read/modify/write cycle.
First, expand the range to cover complete blocks. If we had to change
the original pos or length, issue a read to fill the first and/or last
pages, and fetch the version of the object from the result.
We then copy data into the pages as usual, encrypt the result and issue
a write prefixed by an assertion that the version hasn't changed. If it has
changed then we restart the whole thing again.
If there is no object at that position in the file (-ENOENT), we prefix
the write on an exclusive create of the object instead.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Encrypted files will need to be dealt with in block-sized chunks and
once we do that, the way that ceph_sync_write aligns the data in the
bounce buffer won't be acceptable.
Change it to align the data the same way it would be aligned in the
pagecache.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Eventually I want to merge the synchronous and direct read codepaths,
possibly via new netfs infrastructure. For now, the direct path is not
crypto-enabled, so use the sync read/write paths instead.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This will transfer the encrypted last block contents to the MDS
along with the truncate request only when the new size is smaller
and not aligned to the fscrypt BLOCK size. When the last block is
located in the file hole, the truncate request will only contain
the header.
The MDS could fail to do the truncate if there has another client
or process has already updated the RADOS object which contains
the last block, and will return -EAGAIN, then the kclient needs
to retry it. The RMW will take around 50ms, and will let it retry
20 times for now.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Turn the guts of ceph_sync_read into a new helper that takes an inode
and an offset instead of a kiocb struct, and make ceph_sync_read call
the helper as a wrapper.
Make the new helper always return the last object's version.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Currently we have some special-casing for multi-op writes, but in the
case of a read, we can't really handle it. All of the current multi-op
callers call it with CEPH_OSD_FLAG_WRITE set.
Have ceph_osdc_new_request check for CEPH_OSD_FLAG_READ and if it's set,
allocate multiple reply ops instead of multiple request ops. If neither
flag is set, return -EINVAL.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
...and record the user_version in the reply in a new field in
ceph_osd_request, so we can populate the assert_ver appropriately.
Shuffle the fields a bit too so that the new field fits in an
existing hole on x86_64.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Handle the new fscrypt_file and fscrypt_auth fields in cap messages. Use
them to populate new fields in cap_extra_info and update the inode with
those values.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
For encrypted inodes, transmit a rounded-up size to the MDS as the
normal file size and send the real inode size in fscrypt_file field.
Also, fix up creates and truncates to also transmit fscrypt_file.
When we get an inode trace from the MDS, grab the fscrypt_file field if
the inode is encrypted, and use it to populate the i_size field instead
of the regular inode size field.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When setting a directory's crypt context, ceph_dir_clear_complete()
needs to be called otherwise if it was complete before, any existing
(old) dentry will still be valid.
This patch adds a wrapper around __fscrypt_prepare_readdir() which will
ensure a directory is marked as non-complete if key status changes.
[ xiubli: revise commit title per Milind ]
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If a client doesn't have Fx caps on a directory, it will get errors while
trying encrypt it:
ceph: handle_cap_grant: cap grant attempt to change fscrypt_auth on non-I_NEW inode (old len 0 new len 48)
fscrypt (ceph, inode 1099511627812): Error -105 getting encryption context
A simple way to reproduce this is to use two clients:
client1 # mkdir /mnt/mydir
client2 # ls /mnt/mydir
client1 # fscrypt encrypt /mnt/mydir
client1 # echo hello > /mnt/mydir/world
This happens because, in __ceph_setattr(), we only initialize
ci->fscrypt_auth if we have Ax and ceph_fill_inode() won't use the
fscrypt_auth received if the inode state isn't I_NEW. Fix it by allowing
ceph_fill_inode() to also set ci->fscrypt_auth if the inode doesn't have
it set already.
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add the appropriate calls into fscrypt for various actions, including
link, rename, setattr, and the open codepaths.
Disable fallocate for encrypted inodes -- hopefully, just for now.
If we have an encrypted inode, then the client will need to re-encrypt
the contents of the new object. Disable copy offload to or from
encrypted inodes.
Set i_blkbits to crypto block size for encrypted inodes -- some of the
underlying infrastructure for fscrypt relies on i_blkbits being aligned
to crypto blocksize.
Report STATX_ATTR_ENCRYPTED on encrypted inodes.
[ lhenriques: forbid encryption with striped layouts ]
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When creating symlinks in encrypted directories, encrypt and
base64-encode the target with the new inode's key before sending to the
MDS.
When filling a symlinked inode, base64-decode it into a buffer that
we'll keep in ci->i_symlink. When get_link is called, decrypt the buffer
into a new one that will hang off i_link.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
To make it simpler to decrypt names in a readdir reply (i.e. before
we have a dentry), add a new ceph_encode_encrypted_fname()-like helper
that takes a qstr pointer instead of a dentry pointer.
Once we've decrypted the names in a readdir reply, we no longer need the
crypttext, so overwrite them in ceph_mds_reply_dir_entry with the
unencrypted names. Then in both ceph_readdir_prepopulate() and
ceph_readdir() we will use the dencrypted name directly.
[ jlayton: convert some BUG_ONs into error returns ]
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Instead of passing just the r_reply_info to the readdir reply parser,
pass the request pointer directly instead. This will facilitate
implementing readdir on fscrypted directories.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When we get a dentry in a trace, decrypt the name so we can properly
instantiate the dentry or fill out ceph_get_name() buffer.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Define a new ceph_fname struct that we can use to carry information
about encrypted dentry names. Add helpers for working with these
objects, including ceph_fname_to_usr which formats an encrypted filename
for userland presentation.
[ xiubli: fix resulting name length check -- neither name_len nor
ctext_len should exceed NAME_MAX ]
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If we have a dentry which represents a no-key name, then we need to test
whether the parent directory's encryption key has since been added. Do
that before we test anything else about the dentry.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This is required so that we know to invalidate these dentries when the
directory is unlocked.
Atomic open can act as a lookup if handed a dentry that is negative on
the MDS. Ensure that we set DCACHE_NOKEY_NAME on the dentry in
atomic_open, if we don't have the key for the parent. Otherwise, we can
end up validating the dentry inappropriately if someone later adds a
key.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Ceph is a bit different from local filesystems, in that we don't want
to store filenames as raw binary data, since we may also be dealing
with clients that don't support fscrypt.
We could just base64-encode the encrypted filenames, but that could
leave us with filenames longer than NAME_MAX. It turns out that the
MDS doesn't care much about filename length, but the clients do.
To manage this, we've added a new "alternate name" field that can be
optionally added to any dentry that we'll use to store the binary
crypttext of the filename if its base64-encoded value will be longer
than NAME_MAX. When a dentry has one of these names attached, the MDS
will send it along in the lease info, which we can then store for
later usage.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In the event that we have a filename longer than CEPH_NOHASH_NAME_MAX,
we'll need to hash the tail of the filename. The client however will
still need to know the full name of the file if it has a key.
To support this, the MClientRequest field has grown a new alternate_name
field that we populate with the full (binary) crypttext of the filename.
This is then transmitted to the clients in readdir or traces as part of
the dentry lease.
Add support for populating this field when the filenames are very long.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Allow ceph_mdsc_build_path to encrypt and base64 encode the filename
when the parent is encrypted and we're sending the path to the MDS. In
a similar fashion, encode encrypted dentry names if including a dentry
release in a request.
In most cases, we just encrypt the filenames and base64 encode them,
but when the name is longer than CEPH_NOHASH_NAME_MAX, we use a similar
scheme to fscrypt proper, and hash the remaning bits with sha256.
When doing this, we then send along the full crypttext of the name in
the new alternate_name field of the MClientRequest. The MDS can then
send that along in readdir responses and traces.
[ idryomov: drop duplicate include reported by Abaci Robot ]
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The base64url encoding used by fscrypt includes the '_' character, which
may cause problems in snapshot names (if the name starts with '_').
Thus, use the base64 encoding defined for IMAP mailbox names (RFC 3501),
which uses '+' and ',' instead of '-' and '_'.
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
ioctl file 0000000004e6b054 cmd 2148296211 arg 824635143532
The numerical cmd value in the ioctl debug log message is too hard to
understand even when you look at it in the code. Make it more readable.
[ idryomov: add missing _ in ceph_ioctl_cmd_name() ]
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
We gate most of the ioctls on MDS feature support. The exception is the
key removal and status functions that we still want to work if the MDS's
were to (inexplicably) lose the feature.
For the set_policy ioctl, we take Fs caps to ensure that nothing can
create files in the directory while the ioctl is running. That should
be enough to ensure that the "empty_dir" check is reliable.
The vxattr is read-only, added mostly for future debugging purposes.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add support for the test_dummy_encryption mount option. This allows us
to test the encrypted codepaths in ceph without having to manually set
keys, etc.
[ lhenriques: fix potential fsc->fsc_dummy_enc_policy memory leak in
ceph_real_mount() ]
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Most fscrypt-enabled filesystems store the crypto context in an xattr,
but that's problematic for ceph as xatts are governed by the XATTR cap,
but we really want the crypto context as part of the AUTH cap.
Because of this, the MDS has added two new inode metadata fields:
fscrypt_auth and fscrypt_file. The former is used to hold the crypto
context, and the latter is used to track the real file size.
Parse new fscrypt_auth and fscrypt_file fields in inode traces. For now,
we don't use fscrypt_file, but fscrypt_auth is used to hold the fscrypt
context.
Allow the client to use a setattr request for setting the fscrypt_auth
field. Since this is not a standard setattr request from the VFS, we add
a new field to __ceph_setattr that carries ceph-specific inode attrs.
Have the set_context op do a setattr that sets the fscrypt_auth value,
and get_context just return the contents of that field (since it should
always be available).
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The netfs layer has already pinned the pages involved before calling
issue_op, so we can just pass down the iter directly instead of calling
iov_iter_get_pages_alloc.
Instead of having to allocate a page array, use CEPH_MSG_DATA_ITER and
pass it the iov_iter directly to clone.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add an iov_iter to the unions in ceph_msg_data and ceph_msg_data_cursor.
Instead of requiring a list of pages or bvecs, we can just use an
iov_iter directly, and avoid extra allocations.
We assume that the pages represented by the iter are pinned such that
they shouldn't incur page faults, which is the case for the iov_iters
created by netfs.
While working on this, Al Viro informed me that he was going to change
iov_iter_get_pages to auto-advance the iterator as that pattern is more
or less required for ITER_PIPE anyway. We emulate that here for now by
advancing in the _next op and tracking that amount in the "lastlen"
field.
In the event that _next is called twice without an intervening
_advance, we revert the iov_iter by the remaining lastlen before
calling iov_iter_get_pages.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Encryption potentially requires allocation, at which point we'll need to
be in a non-atomic context. Convert ceph_msdc_build_path to take dentry
spinlocks and references instead of using rcu_read_lock to walk the
path.
This is slightly less efficient, and we may want to eventually allow
using RCU when the leaf dentry isn't encrypted.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When creating a new inode, we need to determine the crypto context
before we can transmit the RPC. The fscrypt API has a routine for getting
a crypto context before a create occurs, but it requires an inode.
Change the ceph code to preallocate an inode in advance of a create of
any sort (open(), mknod(), symlink(), etc). Move the existing code that
generates the ACL and SELinux blobs into this routine since that's
mostly common across all the different codepaths.
In most cases, we just want to allow ceph_fill_trace to use that inode
after the reply comes in, so add a new field to the MDS request for it
(r_new_inode).
The async create codepath is a bit different though. In that case, we
want to hash the inode in advance of the RPC so that it can be used
before the reply comes in. If the call subsequently fails with
-EJUKEBOX, then just put the references and clean up the as_ctx. Note
that with this change, we now need to regenerate the as_ctx when this
occurs, but it's quite rare for it to happen.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add a new mount option that has the client issue sparse reads instead of
normal ones. The callers now preallocate an sparse extent buffer that
the libceph receive code can populate and hand back after the operation
completes.
After a successful sparse read, we can't use the req->r_result value to
determine the amount of data "read", so instead we set the received
length to be from the end of the last extent in the buffer. Any
interstitial holes will have been filled by the receive code.
[ xiubli: fix a double free on req reported by Ilya ]
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Have get_reply check for the presence of sparse read ops in the
request and set the sparse_read boolean in the msg. That will queue the
messenger layer to use the sparse read codepath instead of the normal
data receive.
Add a new sparse_read operation for the OSD client, driven by its own
state machine. The messenger will repeatedly call the sparse_read
operation, and it will pass back the necessary info to set up to read
the next extent of data, while zero-filling the sparse regions.
The state machine will stop at the end of the last extent, and will
attach the extent map buffer to the ceph_osd_req_op so that the caller
can use it.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add 2 new fields to ceph_connection_v1_info to track the necessary info
in sparse reads. Skip initializing the cursor for a sparse read.
Break out read_partial_message_section into a wrapper around a new
read_partial_message_chunk function that doesn't zero out the crc first.
Add new helper functions to drive receiving into the destinations
provided by the sparse_read state machine.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add a new init_sgs_pages helper that populates the scatterlist from
an arbitrary point in an array of pages.
Change setup_message_sgs to take an optional pointer to an array of
pages. If that's set, then the scatterlist will be set using that
array instead of the cursor.
When given a sparse read on a secure connection, decrypt the data
in-place rather than into the final destination, by passing it the
in_enc_pages array.
After decrypting, run the sparse_read state machine in a loop, copying
data from the decrypted pages until it's complete.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add support for a new sparse_read ceph_connection operation. The idea is
that the client driver can define this operation use it to do special
handling for incoming reads.
The alloc_msg routine will look at the request and determine whether the
reply is expected to be sparse. If it is, then we'll dispatch to a
different set of state machine states that will repeatedly call the
driver's sparse_read op to get length and placement info for reading the
extent map, and the extents themselves.
This necessitates adding some new field to some other structs:
- The msg gets a new bool to track whether it's a sparse_read request.
- A new field is added to the cursor to track the amount remaining in the
current extent. This is used to cap the read from the socket into the
msg_data
- Handing a revoke with all of this is particularly difficult, so I've
added a new data_len_remain field to the v2 connection info, and then
use that to skip that much on a revoke. We may want to expand the use of
that to the normal read path as well, just for consistency's sake.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When the OSD sends back a sparse read reply, it contains an array of
these structures. Define the structure and add a couple of helpers for
dealing with them.
Also add a place in struct ceph_osd_req_op to store the extent buffer,
and code to free it if it's populated when the req is torn down.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In a later patch, we're going to need to search for a request in
the rbtree, but taking the o_mutex is inconvenient as we already
hold the con mutex at the point where we need it.
Add a new spinlock that we take when inserting and erasing entries from
the o_requests tree. Search of the rbtree can be done with either the
mutex or the spinlock, but insertion and removal requires both.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Here are some small tty and serial core fixes for 6.5-rc7 that resolve a
lot of reported issues.
Primarily in here is the fixes for the serial bus code from Tony that
came in -rc1, as it hit wider testing with the huge number of different
types of systems and serial ports. All of the reported issues with
duplicate names and other issues with this code are now resolved.
Other than that included in here is:
- n_gsm fix for a previous fix
- 8250 lockdep annotation fix
- fsl_lpuart serial driver fix
- TIOCSTI documentation update for previous CAP_SYS_ADMIN change
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZOEjmg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykpSgCfajOM7BUzL1kOrfKNvHQuPmOYlIUAnAot+4M+
HkvS58Xs2+PM14y/KG1j
=6DRj
-----END PGP SIGNATURE-----
Merge tag 'tty-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty and serial core fixes for 6.5-rc7 that resolve
a lot of reported issues.
Primarily in here are the fixes for the serial bus code from Tony that
came in -rc1, as it hit wider testing with the huge number of
different types of systems and serial ports. All of the reported
issues with duplicate names and other issues with this code are now
resolved.
Other than that included in here is:
- n_gsm fix for a previous fix
- 8250 lockdep annotation fix
- fsl_lpuart serial driver fix
- TIOCSTI documentation update for previous CAP_SYS_ADMIN change
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: core: Fix serial core port id, including multiport devices
serial: 8250: drop lockdep annotation from serial8250_clear_IER()
tty: n_gsm: fix the UAF caused by race condition in gsm_cleanup_mux
serial: core: Revert port_id use
TIOCSTI: Document CAP_SYS_ADMIN behaviour in Kconfig
serial: 8250: Fix oops for port->pm on uart_change_pm()
serial: 8250: Reinit port_id when adding back serial8250_isa_devs
serial: core: Fix kmemleak issue for serial core device remove
MAINTAINERS: Merge TTY layer and serial drivers
serial: core: Fix serial_base_match() after fixing controller port name
serial: core: Fix serial core controller port name to show controller id
serial: core: Fix serial core port id to not use port->line
serial: core: Controller id cannot be negative
tty: serial: fsl_lpuart: Clear the error flags by writing 1 for lpuart32 platforms
