IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Adds the PCI ID for X-Fi cards sold under the Platnum and XtremeMusic names
Before: snd_ctxfi 0000:05:05.0: chip 20K1 model Unknown (1102:0021) is found
After: snd_ctxfi 0000:05:05.0: chip 20K1 model SB046x (1102:0021) is found
[ This is only about defining the model name string, and the rest is
handled just like before, as a default unknown device.
Edward confirmed that the stuff has been working fine -- tiwai ]
Signed-off-by: Edward Matijevic <motolav@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/cae7d1a4-8bd9-7dfe-7427-db7e766f7272@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The quirk entry for Focusrite Saffire 6 had no proper ep_idx for the
capture endpoint, and this confused the driver, resulting in the
broken sound. This patch adds the missing ep_idx in the entry.
While we are at it, a couple of other entries (for Digidesign MBox and
MOTU MicroBook II) seem to have the same problem, and those are
covered as well.
Fixes: bf6313a0ff76 ("ALSA: usb-audio: Refactor endpoint management")
Reported-by: André Kapelrud <a.kapelrud@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220521065325.426-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Maris reported that TEAC UD-501 (0644:8043) doesn't work with the
typical "clock source 41 is not valid, cannot use" errors on the
recent kernels. The currently known workaround so far is to restore
(partially) what we've done unconditionally at the clock setup;
namely, re-setup the USB interface immediately after the clock is
changed. This patch re-introduces the behavior conditionally for TEAC
devices.
Further notes:
- The USB interface shall be set later in
snd_usb_endpoint_configure(), but this seems to be too late.
- Even calling usb_set_interface() right after
sne_usb_init_sample_rate() doesn't help; so this must be related
with the clock validation, too.
- The device may still spew the "clock source 41 is not valid" error
at the first clock setup. This seems happening at the very first
try of clock setup, but it disappears at later attempts.
The error is likely harmless because the driver retries the clock
setup (such an error is more or less expected on some devices).
Fixes: bf6313a0ff76 ("ALSA: usb-audio: Refactor endpoint management")
Reported-and-tested-by: Maris Abele <maris7abele@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220521064627.29292-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
GCC 12 sees that it's technically possible for num_streams to be larger
than ARRAY_SIZE(pcm->streams). Bounds-check the iterator.
../sound/pci/lola/lola_pcm.c: In function 'lola_pcm_update':
../sound/pci/lola/lola_pcm.c:567:64: warning: array subscript [0, 31] is outside array bounds of 'struct lola_stream[16]' [-Warray-bounds]
567 | struct lola_stream *str = &pcm->streams[i];
| ~~~~~~~~~~~~^~~
In file included from ../sound/pci/lola/lola_pcm.c:15:
../sound/pci/lola/lola.h:307:28: note: while referencing 'streams'
307 | struct lola_stream streams[MAX_STREAM_COUNT];
| ^~~~~~~
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220520165537.2139826-1-keescook@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is rather late and at this point I'm expecting it to get merged in
the merge window rather than as a fix but if we get a -rc8 it's a small,
driver specific fix which should be fine to send.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmKHo04ACgkQJNaLcl1U
h9Ag3Qf8DodKNfpEaYOYfgnE/+VojHwnqLQlvedk9iA6Jzfo+3VwH9fI4ZGUVkdR
L/F8lkF6uQEyW4tcIdVylMejrItcuxQ2x3Ov7xmRcrZlpUueoI79DcDerR5kQTXE
f/rPXFKFwfuznPpZvs9maQ7YvLxnA88ZhLq/b0bLvkaL3FFtpI8+KOcslUph5/9X
uGBGaYj8AzAJVZIT0jG4R4iXD0DWyATcoS/vLIU3r3pkO1fw5R8IgG0UggMNJ/mW
G2iU/wO/QXHdX4OwO0wxojbrjCSLJBq5rbtwWIFCg2chz05gEgXNebzBAm2sijt4
fhPheCABCFfY5lIUtcpvxiLzJKbE+w==
=OBCV
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.18-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fix for v5.17
This is rather late and at this point I'm expecting it to get merged in
the merge window rather than as a fix but if we get a -rc8 it's a small,
driver specific fix which should be fine to send.
Fix following coccicheck error:
./sound/usb/endpoint.c:1671:8-10: ERROR: reference preceded by free on line 1671.
Here should be 'cp' rather than 'ip'.
Fixes: c11117b634f4 ("ALSA: usb-audio: Refcount multiple accesses on the single clock")
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Link: https://lore.kernel.org/r/20220518021617.10114-1-wanjiabing@vivo.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a clock source is connected to multiple nodes / endpoints, the
current USB-audio driver tries to set up at each time one of them is
configured. Although it reads the current rate and updates only if it
differs, some devices seem unhappy with this behavior and spew the
errors when reading/updating the rate unnecessarily.
This patch tries to reduce the redundant clock setup by introducing a
refcount for each clock source. When the stream is actually running,
a clock rate is "locked", and it bypasses the clock and/or refuse to
change any longer.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215934
Link: https://lore.kernel.org/r/20220516104807.16482-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At cleaning up and moving the device rename from the quirk table to
its own table, we removed the entry for Rane SL-1 as we thought it's
only for renaming. It turned out, however, that the quirk is required
for matching with the device that declares itself as no standard
audio but only as vendor-specific.
Restore the quirk entry for Rane SL-1 to fix the regression.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215887
Fixes: 5436f59bc5bc ("ALSA: usb-audio: Move device rename and profile quirks to an internal table")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220516103112.12950-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This will be used to identify ALSA controls and firmware.
The Amp Name will be a channel identifier (L or R), and an
index, which identifies which amp for that channel.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220509214703.4482-10-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This can then be used by HDA code to configure cs_dsp.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220509214703.4482-9-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This sequence is required to setup firmware, and will
be needed for hda driver.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220509214703.4482-8-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This function is used to control the DSP Firmware for cs35l41,
and will be needed by the cs35l41 hda driver, when firmware
support is added.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220509214703.4482-7-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
CLSA0100 Laptop does not contain configuration inside ACPI,
instead the hardware configuration needs to be hardcoded.
Hardcode GPIO2 Interrupt in the driver for CSLA0100.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220509214703.4482-6-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The CS35L41 can produce interrupts on error.
When the interrupts occur, the driver will report
the error, but errors will only be fixed after playback
finishes.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220509214703.4482-5-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This API was required for CLSA0100 laptop, which did not
have correct properties inside ACPI. The required values
are now hardcoded inside the driver so this is no longer
needed.
Without this api, there CLSA0100 can now use the generic
cs35l41 fixup, like the other laptops.
All other laptops will read the Speaker Position from
ACPI and set the channel map from within the driver.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220509214703.4482-4-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This laptop does not contain required properties inside ACPI,
instead the values are be hardcoded inside the driver.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220509214703.4482-3-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For consistency, rename spi cs35l41 hda driver name so that
it matches i2c.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220509214703.4482-2-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HP EliteBook 630 is using ALC236 codec which used 0x02 to control mute LED
and 0x01 to control micmute LED. Therefore, add a quirk to make it works.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220513121648.28584-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Generic serial MIDI driver adding support for using serial devices
compatible with the serial bus as raw MIDI devices, allowing using
additional serial devices not compatible with the existing
serial-u16550 driver. Supports only setting standard serial baudrates on
the underlying serial device; however, the underlying serial device can
be configured so that a requested 38.4 kBaud is actually the standard MIDI
31.25 kBaud. Supports DeviceTree configuration.
Signed-off-by: Daniel Kaehn <kaehndan@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220509145933.1161526-3-kaehndan@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adds dt-binding for a Generic MIDI Interface using a serial device.
Signed-off-by: Daniel Kaehn <kaehndan@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220509145933.1161526-2-kaehndan@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add support for a Speaker Playback Switch, which disables
the Amp connected to cs8409. The Switch is not added
automatically because cs8409 does not have an output amp
for the speaker NID.
Note: This switch uses a different GPIO to Cyborg/Odin variants
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220511100207.1268321-4-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add support for a Speaker Playback Switch, which disables
the Amp connected to cs8409. The Switch is not added
automatically because cs8409 does not have an output amp
for the speaker NID.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220511100207.1268321-3-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some board revisions of the Framework Laptop have an ALC295 with a
disconnected or faulty headset mic presence detect.
The "dell-headset-multi" fixup addresses this issue, but also enables an
inoperative "Headphone Mic" input device whenever a headset is
connected.
Adding a new quirk chain specific to the Framework Laptop resolves this
issue. The one introduced here is based on the System76 "no headphone
mic" quirk chain.
The VID:PID f111:0001 have been allocated to Framework Computer for this
board revision.
Revision history:
- v2: Moved to a custom quirk chain to suppress the "Headphone Mic"
pincfg.
Signed-off-by: Dustin L. Howett <dustin@howett.net>
Link: https://lore.kernel.org/r/20220511010759.3554-1-dustin@howett.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The antient ISA wavefront driver reads its sample patch data (uploaded
over an ioctl) via __get_user() with no good reason; likely just for
some performance optimizations in the past. Let's change this to the
standard get_user() and the error check for handling the fault case
properly.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220510103626.16635-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For Jack detection on CS42L42, detection is normally done using
"auto" mode, which automatically detects what type of jack is
connected to the device. However, some headsets are not
automatically detected, and as such and alternative detection
method "manual mode" can be used to detect these headsets.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Tested-by: Chris Chiu <chris.chiu@canonical.com>
Link: https://lore.kernel.org/r/20220504161236.2490532-4-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is to allow the hda driver to have access to the register names,
for improved maintainability.
Also ensure new header is aligned to 100 columns.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220504161236.2490532-2-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pointer kctl is being assigned a value that is not being read, buf
is being re-assigned later. The assignment is redundant and can be
removed.
Cleans up clang scan build warning:
sound/pci/rme9652/hdsp.c:3317:28: warning: Although the value stored
to 'kctl' is used in the enclosing expression, the value is never
actually read from 'kctl' [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220508212819.59188-1-colin.i.king@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The driver is currently using ALC269_FIXUP_DELL4_MIC_NO_PRESENCE for
the Latitude 7520, but this fixup chain has some issues:
- The internal mic is really loud and the recorded audio is distorted
at "standard" audio levels.
- There are pop noises at system startup and when plugging/unplugging
headphone jacks.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215885
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Link: https://lore.kernel.org/r/20220501124237.4667-1-gabriele.mzt@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When CONFIG_PM is not enabled, alc_shutup() is not needed,
so move it inside the #ifdef CONFIG_PM guard.
Also drop some contiguous #endif / #ifdef CONFIG_PM for simplicity.
Fixes this build warning:
sound/pci/hda/patch_realtek.c:886:20: warning: unused function 'alc_shutup'
Fixes: 08c189f2c552 ("ALSA: hda - Use generic parser codes for Realtek driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220430193318.29024-1-rdunlap@infradead.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This device doesn't support reading the sample rate, so we need to apply
this quirk to avoid a 15-second delay waiting for three timeouts.
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Link: https://lore.kernel.org/r/20220504002444.114011-2-cyrozap@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A larger collection of fixes than I'd like, mainly because mixer-test
is making it's way into the CI systems and turning up issues on a wider
range of systems. The most substantial thing though is a revert and an
alternative fix for a dmaengine issue where the fix caused disruption
for some other configurations, the core fix is backed out an a driver
specific thing done instead.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmJqduYACgkQJNaLcl1U
h9BpLQf+Il8MGBeIsS5j4WVqOeoQLaptRQKWSTtLm7HJIs0Npbc8eulArMea7OrH
gYB0EGhIPowkVWy2SdPv6QVH8U9DlokF22Y3W/DVjaZzYqAN4mWHcWEeGdGVDH4i
gvjny3lXaoSKHyDUGNyomo1JbF1g7hBCT9Ph30Kcq6h62BVjcZzOmcu2xSN4RCEi
OmA0XF7jfubXqCZqoXuxrCcltSpFhz2zmqq7ieR1Kog5YWgNWWGUjns+U4dpkdVI
iGtmOO5v/umGWTc/zXsNBLBiG3mQV8G7+OI7SkgaylFhuNcUoiu6bAt0m+meFroM
d8Wj9wwizxHuzuF16hwJYPacR4KTvg==
=FTRS
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.18-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.18
A larger collection of fixes than I'd like, mainly because mixer-test
is making it's way into the CI systems and turning up issues on a wider
range of systems. The most substantial thing though is a revert and an
alternative fix for a dmaengine issue where the fix caused disruption
for some other configurations, the core fix is backed out an a driver
specific thing done instead.
Check that values written via snd_soc_put_volsw_range() are
within the range advertised by the control, ensuring that we
don't write out of spec values to the hardware.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220423131239.3375261-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As pointed out by Sascha Hauer, this patch changes:
if (pmc->config && !pcm->config->prepare_slave_config)
<do nothing>
to:
if (pmc->config && !pcm->config->prepare_slave_config)
snd_dmaengine_pcm_prepare_slave_config()
This breaks the drivers that do not need a call to
dmaengine_slave_config(). Drivers that still need to call
snd_dmaengine_pcm_prepare_slave_config(), but have a NULL
pcm->config->prepare_slave_config should use
snd_dmaengine_pcm_prepare_slave_config() as their prepare_slave_config
callback.
Fixes: 9a1e13440a4f ("ASoC: dmaengine: do not use a NULL prepare_slave_config() callback")
Reported-by: Sascha Hauer <sha@pengutronix.de>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220421125403.2180824-1-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since a pointer to struct snd_dmaengine_pcm_config is passed,
snd_dmaengine_pcm_prepare_slave_config() is no longer called unless it's
explicitly set in prepare_slave_config.
Fixes: 50291652af52 ("ASoC: atmel: mchp-pdmc: add PDMC driver")
Suggested-by: Sascha Hauer <sha@pengutronix.de>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220421125403.2180824-2-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The max98090 driver has some custom controls which share a put() function
which returns 0 unconditionally, meaning that events are not generated
when the value changes. Fix that.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220420193454.2647908-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The max98090 driver has a custom put function for some controls which can
only be updated in certain circumstances which makes no effort to validate
that input is suitable for the control, allowing out of spec values to be
written to the hardware and presented to userspace. Fix this by returning
an error when invalid values are written.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220420193454.2647908-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA fireworks driver has a bug in its initial state to return count
shorter than expected by 4 bytes to userspace applications when handling
response frame for Echo Audio Fireworks transaction. It's due to missing
addition of the size for the type of event in ALSA firewire stack.
Fixes: 555e8a8f7f14 ("ALSA: fireworks: Add command/response functionality into hwdep interface")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20220424102428.21109-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Lenovo Yoga Duet 7 13ITL6 has Realtek ALC287 and built-in
speakers do not work out of the box. The fix developed for
Yoga 7i 14ITL5 also enables speaker output for this model.
Signed-off-by: Zihao Wang <wzhd@ustc.edu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220424084120.74125-1-wzhd@ustc.edu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
card->local_node and card->bm_retries are both always accessed under
card->lock.
fw_core_handle_bus_reset has a check whose condition depends on
card->local_node and whose body writes to card->bm_retries.
Both of these accesses are not under card->lock. Move the lock acquiring
of card->lock to before this check such that these accesses do happen
when card->lock is held.
fw_destroy_nodes is called inside the check.
Since fw_destroy_nodes already acquires card->lock inside its function
body, move this out to the callsites of fw_destroy_nodes.
Also add a comment to indicate which locking is necessary when calling
fw_destroy_nodes.
Cc: <stable@vger.kernel.org>
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20220409041243.603210-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When list_for_each_entry() completes the iteration over the whole list
without breaking the loop, the iterator value will be a bogus pointer
computed based on the head element.
While it is safe to use the pointer to determine if it was computed
based on the head element, either with list_entry_is_head() or
&pos->member == head, using the iterator variable after the loop should
be avoided.
In preparation to limit the scope of a list iterator to the list
traversal loop, use a dedicated pointer to point to the found element [1].
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1]
Cc: <stable@vger.kernel.org>
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20220409041243.603210-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
