IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
AMD IBS can do per-process profiling[1] and is no longer restricted to
per-cpu or systemwide only. Remove stale error message. Also, checking
just exclude_kernel is not sufficient since IBS does not support any
privilege filters. So include all exclude_* checks. And finally, move
these checks under tools/perf/arch/x86/ from generic code.
Before:
$ sudo ./perf record -e ibs_op//k -C 0
Error:
AMD IBS may only be available in system-wide/per-cpu mode. Try
using -a, or -C and workload affinity
After:
$ sudo ./perf record -e ibs_op//k -C 0
Error:
AMD IBS doesn't support privilege filtering. Try again without
the privilege modifiers (like 'k') at the end.
[1] https://git.kernel.org/torvalds/c/30093056f7b2
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: ananth.narayan@amd.com
Cc: sandipan.das@amd.com
Cc: santosh.shukla@amd.com
Cc: irogers@google.com
Cc: peterz@infradead.org
Cc: adrian.hunter@intel.com
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Link: https://lore.kernel.org/r/20230630085230.437-1-ravi.bangoria@amd.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
In the default mode, the current output of the metricgroup include both
events and metrics, which is not necessary and just makes the output
hard to read. Since different ARCHs (even different generations in the
same ARCH) may use different events. The output also vary on different
platforms.
For a metricgroup, only outputting the value of each metric is good
enough.
Add a new field default_metricgroup in evsel to indicate an event of the
default metricgroup. For those events, printout() should print the
metricgroup name rather than each event.
Add perf_stat__skip_metric_event() to skip the evsel in the Default
metricgroup, if it's not running or not the metric event.
Add print_metricgroup_header_t to pass the functions which print the
display name of each metricgroup in the Default metricgroup. Support all
three output methods.
Factor out perf_stat__print_shadow_stats_metricgroup() to print out each
metrics.
On SPR:
Before:
./perf_old stat sleep 1
Performance counter stats for 'sleep 1':
0.54 msec task-clock:u # 0.001 CPUs utilized
0 context-switches:u # 0.000 /sec
0 cpu-migrations:u # 0.000 /sec
68 page-faults:u # 125.445 K/sec
540,970 cycles:u # 0.998 GHz
556,325 instructions:u # 1.03 insn per cycle
123,602 branches:u # 228.018 M/sec
6,889 branch-misses:u # 5.57% of all branches
3,245,820 TOPDOWN.SLOTS:u # 18.4 % tma_backend_bound
# 17.2 % tma_retiring
# 23.1 % tma_bad_speculation
# 41.4 % tma_frontend_bound
564,859 topdown-retiring:u
1,370,999 topdown-fe-bound:u
603,271 topdown-be-bound:u
744,874 topdown-bad-spec:u
12,661 INT_MISC.UOP_DROPPING:u # 23.357 M/sec
1.001798215 seconds time elapsed
0.000193000 seconds user
0.001700000 seconds sys
After:
$ ./perf stat sleep 1
Performance counter stats for 'sleep 1':
0.51 msec task-clock:u # 0.001 CPUs utilized
0 context-switches:u # 0.000 /sec
0 cpu-migrations:u # 0.000 /sec
68 page-faults:u # 132.683 K/sec
545,228 cycles:u # 1.064 GHz
555,509 instructions:u # 1.02 insn per cycle
123,574 branches:u # 241.120 M/sec
6,957 branch-misses:u # 5.63% of all branches
TopdownL1 # 17.5 % tma_backend_bound
# 22.6 % tma_bad_speculation
# 42.7 % tma_frontend_bound
# 17.1 % tma_retiring
TopdownL2 # 21.8 % tma_branch_mispredicts
# 11.5 % tma_core_bound
# 13.4 % tma_fetch_bandwidth
# 29.3 % tma_fetch_latency
# 2.7 % tma_heavy_operations
# 14.5 % tma_light_operations
# 0.8 % tma_machine_clears
# 6.1 % tma_memory_bound
1.001712086 seconds time elapsed
0.000151000 seconds user
0.001618000 seconds sys
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahmad Yasin <ahmad.yasin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20230616031420.3751973-3-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- Fix BPF CO-RE naming convention for checking the availability of fields on
'union perf_mem_data_src' on the running kernel.
- Remove the use of llvm-strip on BPF skel object files, not needed, fixes a
build breakage when the llvm package, that contains it in most distros, isn't
installed.
- Fix tools that use both evsel->{bpf_counter_list,bpf_filters}, removing them from a
union.
- Remove extra "--" from the 'perf ftrace latency' --use-nsec option,
previously it was working only when using the '-n' alternative.
- Don't stop building when both binutils-devel and a C++ compiler isn't
available to compile the alternative C++ demangle support code, disable that
feature instead.
- Sync the linux/in.h and coresight-pmu.h header copies with the kernel sources.
- Fix relative include path to cs-etm.h.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZHY9egAKCRCyPKLppCJ+
JzbBAQCv+i0j/+garWKCTSe33yztzQGS6jxu/YzQrbQO427DMwEA9fJgp/r2OQC5
wMM5gng2fPaHe6Hs4cnPL/SzMxLC2gQ=
=fHRR
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.4-2-2023-05-30' into perf-tools-next
perf tools fixes for v6.4: 2nd batch
- Fix BPF CO-RE naming convention for checking the availability of fields on
'union perf_mem_data_src' on the running kernel.
- Remove the use of llvm-strip on BPF skel object files, not needed, fixes a
build breakage when the llvm package, that contains it in most distros, isn't
installed.
- Fix tools that use both evsel->{bpf_counter_list,bpf_filters}, removing them from a
union.
- Remove extra "--" from the 'perf ftrace latency' --use-nsec option,
previously it was working only when using the '-n' alternative.
- Don't stop building when both binutils-devel and a C++ compiler isn't
available to compile the alternative C++ demangle support code, disable that
feature instead.
- Sync the linux/in.h and coresight-pmu.h header copies with the kernel sources.
- Fix relative include path to cs-etm.h.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Address/memory sanitizer was reporting issues in evsel__group_pmu_name
because the for_each_group_evsel loop didn't terminate when the head
was reached, the head would then be cast and accessed as an evsel
leading to invalid memory accesses.
Fix for_each_group_member and for_each_group_evsel to terminate at the
list head. Note, evsel__group_pmu_name no longer iterates the group, but
the problem is present regardless.
Fixes: 717e263fc354d53d ("perf report: Show group description when event group is enabled")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20230526194442.2355872-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previously the evsel__group_pmu_name would iterate the evsel's group,
however, the list of evsels aren't yet sorted and so the loop may
terminate prematurely. It is also not desirable to iterate the list of
evsels during list_sort as the list may be broken.
Precompute the group_pmu_name for the evsel before sorting, as part of
the computation and only if necessary, iterate the whole list looking
for group members so that being sorted isn't necessary.
Move the group pmu name computation to parse-events.c given the closer
dependency on the behavior of
parse_events__sort_events_and_fix_groups.
Fixes: 7abf0bccaaec7704 ("perf evsel: Add function to compute group PMU name")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20230526194442.2355872-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
__evlist__add_default adds a cycles event to a typically empty evlist
and was extended for hybrid with evlist__add_default_hybrid, as more
than 1 PMU was necessary. Rather than have dedicated logic for the
cycles event, this change switches to parsing 'cycles:P' which will
handle wildcarding the PMUs appropriately for hybrid.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230527072210.2900565-14-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'struct evsel' uses a union for the two lists. This turned out to be
error prone.
For example:
[root@quaco ~]# perf stat --bpf-prog 5246
Error: cpu-clock event does not have sample flags 66c660
failed to set filter "(null)" on event cpu-clock with 2 (No such file or directory)
[root@quaco ~]# perf stat --bpf-prog 5246
Fix this issue by separating the two lists.
Fixes: 56ec9457a4a20c5e ("perf bpf filter: Implement event sample filtering")
Signed-off-by: Song Liu <song@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: kernel-team@meta.com
Link: https://lore.kernel.org/r/20230519235757.3613719-1-song@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf stat' with no arguments will use default events and metrics. These
events may fail to open even with kernel and hypervisor disabled. When
these fail then the permissions error appears even though they were
implicitly selected. This is particularly a problem with the automatic
selection of the TopdownL1 metric group on certain architectures like
Skylake:
$ perf stat true
Error:
Access to performance monitoring and observability operations is limited.
Consider adjusting /proc/sys/kernel/perf_event_paranoid setting to open
access to performance monitoring and observability operations for processes
without CAP_PERFMON, CAP_SYS_PTRACE or CAP_SYS_ADMIN Linux capability.
More information can be found at 'Perf events and tool security' document:
https://www.kernel.org/doc/html/latest/admin-guide/perf-security.html
perf_event_paranoid setting is 2:
-1: Allow use of (almost) all events by all users
Ignore mlock limit after perf_event_mlock_kb without CAP_IPC_LOCK
>= 0: Disallow raw and ftrace function tracepoint access
>= 1: Disallow CPU event access
>= 2: Disallow kernel profiling
To make the adjusted perf_event_paranoid setting permanent preserve it
in /etc/sysctl.conf (e.g. kernel.perf_event_paranoid = <setting>)
$
This patch adds skippable evsels that when they fail to open won't cause
termination and will appear as "<not supported>" in output. The
TopdownL1 events, from the metric group, are marked as skippable. This
turns the failure above to:
$ perf stat perf bench internals synthesize
Computing performance of single threaded perf event synthesis by
synthesizing events on the perf process itself:
Average synthesis took: 49.287 usec (+- 0.083 usec)
Average num. events: 3.000 (+- 0.000)
Average time per event 16.429 usec
Average data synthesis took: 49.641 usec (+- 0.085 usec)
Average num. events: 11.000 (+- 0.000)
Average time per event 4.513 usec
Performance counter stats for 'perf bench internals synthesize':
1,222.38 msec task-clock:u # 0.993 CPUs utilized
0 context-switches:u # 0.000 /sec
0 cpu-migrations:u # 0.000 /sec
162 page-faults:u # 132.529 /sec
774,445,184 cycles:u # 0.634 GHz (49.61%)
1,640,969,811 instructions:u # 2.12 insn per cycle (59.67%)
302,052,148 branches:u # 247.102 M/sec (59.69%)
1,807,718 branch-misses:u # 0.60% of all branches (59.68%)
5,218,927 CPU_CLK_UNHALTED.REF_XCLK:u # 4.269 M/sec
# 17.3 % tma_frontend_bound
# 56.4 % tma_retiring
# nan % tma_backend_bound
# nan % tma_bad_speculation (60.01%)
536,580,469 IDQ_UOPS_NOT_DELIVERED.CORE:u # 438.965 M/sec (60.33%)
<not supported> INT_MISC.RECOVERY_CYCLES_ANY:u
5,223,936 CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE:u # 4.274 M/sec (40.31%)
774,127,250 CPU_CLK_UNHALTED.THREAD:u # 633.297 M/sec (50.34%)
1,746,579,518 UOPS_RETIRED.RETIRE_SLOTS:u # 1.429 G/sec (50.12%)
1,940,625,702 UOPS_ISSUED.ANY:u # 1.588 G/sec (49.70%)
1.231055525 seconds time elapsed
0.258327000 seconds user
0.965749000 seconds sys
$
The event INT_MISC.RECOVERY_CYCLES_ANY:u is skipped as it can't be
opened with paranoia 2 on Skylake. With a lower paranoia, or as root,
all events/metrics are computed.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahmad Yasin <ahmad.yasin@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20230502223851.2234828-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It seems that perf stat -b <prog id> doesn't produce any results:
$ perf stat -e cycles -b 4 -I 10000 -vvv
Control descriptor is not initialized
cycles: 0 0 0
time counts unit events
10.007641640 <not supported> cycles
Looks like this happens because fentry/fexit progs are getting loaded, but the
corresponding perf event is not enabled and not added into the events bpf map.
I think there is some mixing up between two type of bpf support, one for bperf
and one for bpf_profiler. Both are identified via evsel__is_bpf, based on which
perf events are enabled, but for the latter (bpf_profiler) a perf event is
required. Using evsel__is_bperf to check only bperf produces expected results:
$ perf stat -e cycles -b 4 -I 10000 -vvv
Control descriptor is not initialized
------------------------------------------------------------
perf_event_attr:
size 136
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 3
------------------------------------------------------------
[...perf_event_attr for other CPUs...]
------------------------------------------------------------
cycles: 309426 169009 169009
time counts unit events
10.010091271 309426 cycles
The final numbers correspond (at least in the level of magnitude) to the
same metric obtained via bpftool.
Fixes: 112cb56164bc2108 ("perf stat: Introduce config stat.bpf-counter-events")
Reviewed-by: Song Liu <song@kernel.org>
Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Tested-by: Song Liu <song@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230412182316.11628-1-9erthalion6@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is some duplicated code to only override config values if they
haven't already been set by the user so make a util function for this.
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Denis Nikitin <denik@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230424134748.228137-3-james.clark@arm.com
[ Moved evsel__set_config_if_unset() to util/pmu.c to avoid dragging stuff into the python binding ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This makes the logic a bit clear by avoiding the !strcmp() pattern and
also a way to intercept the pointer if we need to do extra validation on
it or to do lazy setting of evsel->name via evsel__name(evsel).
Reviewed-by: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZEGLM8VehJbS0gP2@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The BPF program will be attached to a perf_event and be triggered when
it overflows. It'd iterate the filters map and compare the sample
value according to the expression. If any of them fails, the sample
would be dropped.
Also it needs to have the corresponding sample data for the expression
so it compares data->sample_flags with the given value. To access the
sample data, it uses the bpf_cast_to_kern_ctx() kfunc which was added
in v6.2 kernel.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230314234237.3008956-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This flag used to be used when regrouping uncore events in particular
due to wildcard matches. This is now handled by sorting evlist and so
the flag is redundant.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20230312021543.3060328-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The computed name respects software events and aux event groups, such
that the pmu_name is changed to be that of the aux event leader or
group leader for software events. This is done as a later change will
split events that are in different PMUs into different groups.
Committer notes:
Added a stub for this new function so that 'perf test python' passes.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20230312021543.3060328-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
List sorting, added later to evlist, passes const elements requiring
helper functions to also be const. Make the argument to
evsel__find_pmu, evsel__is_aux_event and evsel__leader const.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20230312021543.3060328-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch the hard coded metrics to use the aggregate value rather than
from saved_value. When computing a metric like IPC the aggregate count
comes from instructions then cycles is looked up and if present IPC
computed. Rather than lookup from the saved_value rbtree, search the
counter's evlist for the desired counter.
A new helper evsel__stat_type is used to both quickly find a metric
function and to identify when a counter is the one being sought. So
that both total and miss counts can be sought, the stat_type enum is
expanded. The ratio functions are rewritten to share a common helper
with the ratios being directly passed rather than computed from an
enum value.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Link: https://lore.kernel.org/r/20230219092848.639226-51-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Metrics are their own unit and these variables held broken metrics
previously and now just hold the value NULL. Remove code that used
these variables.
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230126233645.200509-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use public API when possible, don't include internal API in header
files in evsel.h. Fix any related breakages.
Committer note:
There was one missing case, when building for arm64:
arch/arm64/util/pmu.c: In function 'pmu_events_table__find':
arch/arm64/util/pmu.c:18:30: error: invalid use of undefined type 'struct perf_cpu_map'
18 | if (pmu->cpus->nr != cpu__max_cpu().cpu)
| ^~
Fix it by adding one more exception, including <internal/cpumap.h>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221109184914.1357295-14-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Replace usage with perf_pmu__is_hybrid().
Suggested-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xin Gao <gaoxin@cdjrlc.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: http://lore.kernel.org/lkml/20221114210723.2749751-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As we want to see the number of lost samples in the perf report, set the
LOST format when it configs evsel. On old kernels, it'd fallback to
disable it.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220901195739.668604-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The commit 55bcf6ef314ae8ba ("perf: Extend PERF_TYPE_HARDWARE and
PERF_TYPE_HW_CACHE") extends the two types to become PMU aware types for
a hybrid system. However, current evsel__hw_name doesn't take the PMU
type into account. It mistakenly returns the "unknown-hardware" for the
hardware event with a specific PMU type.
Add an arch specific arch_evsel__hw_name() to specially handle the PMU
aware hardware event.
Currently, the extend PERF_TYPE_HARDWARE and PERF_TYPE_HW_CACHE is only
supported by X86. Only implement the specific arch_evsel__hw_name() for
X86 in the patch.
Nothing is changed for the other archs.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220721065706.2886112-3-zhengjun.xing@linux.intel.com
Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor out evsel__id_hdr_size() so it can be reused.
This is needed by perf inject. When injecting events from a guest perf.data
file, there is a possibility that the sample ID numbers conflict. To
re-write an ID sample, the old one needs to be removed first, which means
determining how big it is with evsel__id_hdr_size() and then subtracting
that from the event size.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: kvm@vger.kernel.org
Link: https://lore.kernel.org/r/20220711093218.10967-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Samples without an L3 miss are discarded and counter is reset with
random value (between 1-15 for fetch PMU and 1-127 for op PMU) when IBS
L3 miss filtering is enabled. This causes a sampling period skew but
there is no way to reconstruct aggregated sampling period. So print a
warning at perf record if user sets l3missonly=1.
Ex:
# perf record -c 10000 -C 0 -e ibs_op/l3missonly=1/
WARNING: Hw internally resets sampling period when L3 Miss Filtering is enabled
and tagged operation does not cause L3 Miss. This causes sampling period skew.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <rrichter@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: like.xu.linux@gmail.com
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20220604044519.594-2-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If any member in a group has a different cpu mask than the other
members, the current perf stat disables group. when the perf metrics
topdown events are part of the group, the below <not supported> error
will be triggered.
$ perf stat -e "{slots,topdown-retiring,uncore_imc_free_running_0/dclk/}" -a sleep 1
WARNING: grouped events cpus do not match, disabling group:
anon group { slots, topdown-retiring, uncore_imc_free_running_0/dclk/ }
Performance counter stats for 'system wide':
141,465,174 slots
<not supported> topdown-retiring
1,605,330,334 uncore_imc_free_running_0/dclk/
The perf metrics topdown events must always be grouped with a slots
event as leader.
Factor out evsel__remove_from_group() to only remove the regular events
from the group.
Remove evsel__must_be_in_group(), since no one use it anymore.
With the patch, the topdown events aren't broken from the group for the
splitting.
$ perf stat -e "{slots,topdown-retiring,uncore_imc_free_running_0/dclk/}" -a sleep 1
WARNING: grouped events cpus do not match, disabling group:
anon group { slots, topdown-retiring, uncore_imc_free_running_0/dclk/ }
Performance counter stats for 'system wide':
346,110,588 slots
124,608,256 topdown-retiring
1,606,869,976 uncore_imc_free_running_0/dclk/
1.003877592 seconds time elapsed
Fixes: a9a1790247bdcf3b ("perf stat: Ensure group is defined on top of the same cpu mask")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220518143900.1493980-3-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a flag needs_auxtrace_mmap to record whether an auxtrace mmap is
needed, in preparation for correctly determining whether or not an
auxtrace mmap is needed.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20220506122601.367589-10-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Convert to and from a string. Fix evsel__tool_name() as array is
off-by-1. Support more than just duration_time as a metric-id.
Fixes: 75eafc970bd9d36d ("perf list: Print all available tool events")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220507053410.3798748-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It bothered me that during benchmarking using 'perf stat' (to collect
for example CPU cache events) I could not simultaneously retrieve the
times spend in user or kernel mode in a machine readable format.
When running 'perf stat' the output for humans contains the times
reported by rusage and wait4.
$ perf stat -e cache-misses:u -- true
Performance counter stats for 'true':
4,206 cache-misses:u
0.001113619 seconds time elapsed
0.001175000 seconds user
0.000000000 seconds sys
But 'perf stat's machine-readable format does not provide this information.
$ perf stat -x, -e cache-misses:u -- true
4282,,cache-misses:u,492859,100.00,,
I found no way to retrieve this information using the available events
while using machine-readable output.
This patch adds two new tool internal events 'user_time' and
'system_time', similarly to the already present 'duration_time' event.
Both events use the already collected rusage information obtained by
wait4 and tracked in the global ru_stats.
Examples presenting cache-misses and rusage information in both human
and machine-readable form:
$ perf stat -e duration_time,user_time,system_time,cache-misses -- grep -q -r duration_time .
Performance counter stats for 'grep -q -r duration_time .':
67,422,542 ns duration_time:u
50,517,000 ns user_time:u
16,839,000 ns system_time:u
30,937 cache-misses:u
0.067422542 seconds time elapsed
0.050517000 seconds user
0.016839000 seconds sys
$ perf stat -x, -e duration_time,user_time,system_time,cache-misses -- grep -q -r duration_time .
72134524,ns,duration_time:u,72134524,100.00,,
65225000,ns,user_time:u,65225000,100.00,,
6865000,ns,system_time:u,6865000,100.00,,
38705,,cache-misses:u,71189328,100.00,,
Signed-off-by: Florian Fischer <florian.fischer@muhq.space>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220420102354.468173-3-florian.fischer@muhq.space
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch from directly accessing the perf_cpu_map to using the appropriate
libperf API when possible. Using the API simplifies the job of
refactoring use of perf_cpu_map.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lore.kernel.org/lkml/20220122045811.3402706-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previously evlist__for_each_cpu() needed to iterate over the evlist in
an inner loop and call "skip" routines. Refactor this so that the
iteratr is smarter and the next function can update both the current CPU
and evsel.
By using a cpu map index, fix apparent off-by-1 in __run_perf_stat's
call to perf_evsel__close_cpu().
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-35-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move perf_counts_values__scale() from tools/perf/util to tools/lib/perf
so that it can be used with libperf.
Committer notes:
As noted by Jiri, use __s8 instead of s8 on the exported function.
Signed-off-by: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211109085831.3770594-2-nakamura.shun@fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Events like uncore_imc/cas_count_read/ on Skylake open multiple events
and then aggregate in the metric leader. To determine the average value
per event the number of these events is needed. Add a source_count
function that returns this value by counting the number of events with
the given metric leader. For most events the value is 1 but for
uncore_imc/cas_count_read/ it can yield values like 6.
Add a generic test, but manually tested with a test metric that uses
the function.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul A . Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <song@kernel.org>
Cc: Wan Jiabing <wanjiabing@vivo.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20211111002109.194172-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf tool sets exclude_guest by default while calling perf_event_open().
Because IBS does not have filtering capability, it always gets rejected
by IBS PMU driver and thus perf falls back to non-precise sampling. Fix
it by not setting exclude_guest by default on AMD.
Before:
$ sudo ./perf record -C 0 -vvv true |& grep precise
precise_ip 3
decreasing precise_ip by one (2)
precise_ip 2
decreasing precise_ip by one (1)
precise_ip 1
decreasing precise_ip by one (0)
After:
$ sudo ./perf record -C 0 -vvv true |& grep precise
precise_ip 3
decreasing precise_ip by one (2)
precise_ip 2
Committer notes:
Fixup init to zero for perf_env in older compilers:
arch/x86/util/evsel.c:15:26: error: missing field 'os_release' initializer [-Werror,-Wmissing-field-initializers]
struct perf_env env = {0};
^
Committer notes:
Namhyung remarked:
It'd be nice if it can cover explicit "-e cycles:pp" as well.
Ravi clarified:
For explicit :pp modifier, evsel->precise_max does not get set and thus perf
does not try with different attr->precise_ip values while exclude_guest set.
So no issue with explicit :pp:
$ sudo ./perf record -C 0 -e cycles:pp -vvv |& grep "precise_ip\|exclude_guest"
precise_ip 2
exclude_guest 1
precise_ip 2
exclude_guest 1
switching off exclude_guest, exclude_host
precise_ip 2
^C
Also, with :P modifier, evsel->precise_max gets set but exclude_guest does
not and thus :P also works fine:
$ sudo ./perf record -C 0 -e cycles:P -vvv |& grep "precise_ip\|exclude_guest"
precise_ip 3
decreasing precise_ip by one (2)
precise_ip 2
^C
Reported-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20211103072112.32312-1-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current logic for the perf missing feature has a bug that it can
wrongly clear some modifiers like G or H. Actually some PMUs don't
support any filtering or exclusion while others do. But we check it as
a global feature.
For example, the cycles event can have 'G' modifier to enable it only in
the guest mode on x86. When you don't run any VMs it'll return 0.
# perf stat -a -e cycles:G sleep 1
Performance counter stats for 'system wide':
0 cycles:G
1.000721670 seconds time elapsed
But when it's used with other pmu events that don't support G modifier,
it'll be reset and return non-zero values.
# perf stat -a -e cycles:G,msr/tsc/ sleep 1
Performance counter stats for 'system wide':
538,029,960 cycles:G
16,924,010,738 msr/tsc/
1.001815327 seconds time elapsed
This is because of the missing feature detection logic being global.
Add a hashmap to set pmu-specific exclude_host/guest features.
Committer notes:
Fix 'perf test python' by adding a stub for evsel__find_pmu() in
tools/perf/util/python.c, document that it is used so far only for the
above reasons so that if anybody needs this in the python binding
usecases, we can revisit this.
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: http://lore.kernel.org/lkml/20211105205847.120950-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The branch_stack struct has bit field definition which produces
different bit ordering for big/little endian.
Because of this, when branch_stack sample is collected in a BE system
and viewed/reported in a LE system, bit fields of the branch stack are
not presented properly.
To address this issue, a evsel__bitfield_swap_branch_stack() is defined
and introduced in evsel__parse_sample.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20211028113714.600549-1-maddy@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a new "metric-id" term to events so that metric parsing can set an
ID that can be reliably looked up.
Metric parsing currently will turn a metric like "instructions/cycles"
into a parse events string of "{instructions,cycles}:W".
However, parse-events may change "instructions" into "instructions:u" if
perf_event_paranoid=2.
When this happens expr__resolve_id currently fails as stat-shadow adds
the ID "instructions:u" to match with the counter value and the metric
tries to look up the ID just "instructions".
A later patch will use the new term.
An example of the current problem:
$ echo -1 > /proc/sys/kernel/perf_event_paranoid
$ perf stat -M IPC /bin/true
Performance counter stats for '/bin/true':
1,217,161 inst_retired.any # 0.97 IPC
1,250,389 cpu_clk_unhalted.thread
0.002064773 seconds time elapsed
0.002378000 seconds user
0.000000000 seconds sys
$ echo 2 > /proc/sys/kernel/perf_event_paranoid
$ perf stat -M IPC /bin/true
Performance counter stats for '/bin/true':
150,298 inst_retired.any:u # nan IPC
187,095 cpu_clk_unhalted.thread:u
0.002042731 seconds time elapsed
0.000000000 seconds user
0.002377000 seconds sys
Note: nan IPC is printed as an effect of "perf metric: Use NAN for
missing event IDs." but earlier versions of perf just fail with a parse
error and display no value.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Kilroy <andrew.kilroy@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Denys Zagorui <dzagorui@cisco.com>
Cc: Fabian Hemmer <copy@copy.sh>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jacob Keller <jacob.e.keller@intel.com>
Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nicholas Fraser <nfraser@codeweavers.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: ShihCheng Tu <mrtoastcheng@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Wan Jiabing <wanjiabing@vivo.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20211015172132.1162559-15-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor out copy_config_terms() and free_config_terms() so that they can
be reused.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https //lore.kernel.org/r/20210909125508.28693-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is another patch in the effort to separate the fallback mechanisms
from the open itself.
In case of precise_ip fallback, the original precise_ip will be stored
in the evsel (it was stored in a local variable) and the open will be
retried. Since the precise_ip fallback will be the first in the chain of
fallbacks, there should be no functional change with this patch.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/74208c433d2024a6c4af9c0b140b54ed6b5ea810.1629490974.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch moves ignore_missing_thread outside the perf_event_open loop.
Doing so, we need to move the retry_open flag a few places higher, with
minimal impact. Furthermore, thread need not be decreased since it won't
get increased by the for loop (since we're jumping back inside), but we
need to check that the nthreads decrease didn't put thread out of range.
The goal is to have fallbacks handled in one place only, since in the
future parallel code, these would be handled separately.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/4eca51443c786baaf6811b7cd8e73aafd97f7606.1629490974.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparatory patch for the workqueue patches with the goal to
separate from evlist__open_cpu() the actual opening (which could be
performed in parallel), from the existing fallback mechanisms, which
should be handled sequentially.
This patch separates the rlimit increase from evsel__open_cpu().
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/2f256de8ec37b9809a5cef73c2fa7bce416af5d3.1629490974.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparatory patch for the workqueue patches with the goal to
separate in evlist__open_cpu() the actual opening, which could be
performed in parallel, from the existing fallback mechanisms, which
should be handled sequentially.
This patch separates the missing feature detection in evsel__open_cpu()
into a new evsel__detect_missing_features() function.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/cba0b7d939862473662adeedb0f9c9b69566ee9a.1629490974.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This function will prepare the evsel and disable the missing features.
It will be used in one of the following patches.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/fa5e78bbb92c848226f044278fdcf777b3ce4583.1629490974.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch caches the flags used in perf_event_open() inside evsel, so
that they can be set in __evsel__prepare_open() (this will be useful in
patches in the workqueue series, when the fallback mechanisms will be
handled outside the open itself).
This also optimizes the code, by not having to recompute them everytime.
Since flags are now saved in evsel, the flags argument in
perf_event_open() is removed.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/d9f63159098e56fa518eecf25171d72e6f74df37.1629490974.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ravi Bangoria
Kan Liang
Arnaldo Carvalho de Melo
Ian Rogers
Song Liu
Dmitrii Dolgov
James Clark
Namhyung Kim
Adrian Hunter
Florian Fischer
Shunsuke Nakamura
Madhavan Srinivasan
Riccardo Mancini