IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Regions split function ('damon_split_region_at()') is called at the
beginning of an aggregation interval, and when DAMOS applying the actions
and charging quota. Because 'nr_accesses' fields of all regions are reset
at the beginning of each aggregation interval, and DAMOS was applying the
action at the end of each aggregation interval, there was no need to copy
the 'nr_accesses' field to the split-out region.
However, commit 42f994b71404 ("mm/damon/core: implement scheme-specific
apply interval") made DAMOS applies action on its own timing interval.
Hence, 'nr_accesses' should also copied to split-out regions, but the
commit didn't. Fix it by copying it.
Link: https://lkml.kernel.org/r/20231119171529.66863-1-sj@kernel.org
Fixes: 42f994b71404 ("mm/damon/core: implement scheme-specific apply interval")
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The function '__damos_filter_out()' causes DAMON to always filter out
schemes whose filter type is anon or memcg if its matching value is set
to false.
This commit addresses the issue by ensuring that '__damos_filter_out()'
no longer applies to filters whose type is 'anon' or 'memcg'.
Link: https://lkml.kernel.org/r/1699594629-3816-1-git-send-email-hyeongtak.ji@gmail.com
Fixes: ab9bda001b681 ("mm/damon/core: introduce address range type damos filter")
Signed-off-by: Hyeongtak Ji <hyeongtak.ji@sk.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- "kdump: use generic functions to simplify crashkernel reservation in
arch", from Baoquan He. This is mainly cleanups and consolidation of
the "crashkernel=" kernel parameter handling.
- After much discussion, David Laight's "minmax: Relax type checks in
min() and max()" is here. Hopefully reduces some typecasting and the
use of min_t() and max_t().
- A group of patches from Oleg Nesterov which clean up and slightly fix
our handling of reads from /proc/PID/task/... and which remove
task_struct.therad_group.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZUQP9wAKCRDdBJ7gKXxA
jmOAAQDh8sxagQYocoVsSm28ICqXFeaY9Co1jzBIDdNesAvYVwD/c2DHRqJHEiS4
63BNcG3+hM9nwGJHb5lyh5m79nBMRg0=
=On4u
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"As usual, lots of singleton and doubleton patches all over the tree
and there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- 'kdump: use generic functions to simplify crashkernel reservation
in arch', from Baoquan He. This is mainly cleanups and
consolidation of the 'crashkernel=' kernel parameter handling
- After much discussion, David Laight's 'minmax: Relax type checks in
min() and max()' is here. Hopefully reduces some typecasting and
the use of min_t() and max_t()
- A group of patches from Oleg Nesterov which clean up and slightly
fix our handling of reads from /proc/PID/task/... and which remove
task_struct.thread_group"
* tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits)
scripts/gdb/vmalloc: disable on no-MMU
scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n
.mailmap: add address mapping for Tomeu Vizoso
mailmap: update email address for Claudiu Beznea
tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions
.mailmap: map Benjamin Poirier's address
scripts/gdb: add lx_current support for riscv
ocfs2: fix a spelling typo in comment
proc: test ProtectionKey in proc-empty-vm test
proc: fix proc-empty-vm test with vsyscall
fs/proc/base.c: remove unneeded semicolon
do_io_accounting: use sig->stats_lock
do_io_accounting: use __for_each_thread()
ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error()
ocfs2: fix a typo in a comment
scripts/show_delta: add __main__ judgement before main code
treewide: mark stuff as __ro_after_init
fs: ocfs2: check status values
proc: test /proc/${pid}/statm
compiler.h: move __is_constexpr() to compiler.h
...
When calculating the pseudo-moving access rate, DAMON divides some values
by the maximum nr_accesses. However, due to the type of the related
variables, simple division-based calculation of the divisor can return
zero. As a result, divide-by-zero is possible. Fix it by using
damon_max_nr_accesses(), which handles the case.
Note that this is a fix for a commit that not in the mainline but mm
tree.
Link: https://lkml.kernel.org/r/20231019194924.100347-6-sj@kernel.org
Fixes: ace30fb21af5 ("mm/damon/core: use pseudo-moving sum for nr_accesses_bp")
Reported-by: Jakub Acs <acsjakub@amazon.de>
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When monitoring attributes are changed, DAMON updates access rate of the
monitoring results accordingly. For that, it divides some values by the
maximum nr_accesses. However, due to the type of the related variables,
simple division-based calculation of the divisor can return zero. As a
result, divide-by-zero is possible. Fix it by using
damon_max_nr_accesses(), which handles the case.
Link: https://lkml.kernel.org/r/20231019194924.100347-3-sj@kernel.org
Fixes: 2f5bef5a590b ("mm/damon/core: update monitoring results for new monitoring attributes")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Jakub Acs <acsjakub@amazon.de>
Cc: <stable@vger.kernel.org> [6.3+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
si_meminfo() will read and assign more info not just free/ram pages. For
just DAMOS_WMARK_FREE_MEM_RATE use, only get free and ram pages is ok to
save cpu.
Link: https://lkml.kernel.org/r/20230920015727.4482-1-link@vivo.com
Signed-off-by: Huan Yang <link@vivo.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a kthread_stop_put() helper that stops a thread and puts its task
struct. Use it to replace the various instances of kthread_stop()
followed by put_task_struct().
Remove the kthread_stop_put() macro in usbip that is similar but doesn't
return the result of kthread_stop().
[agruenba@redhat.com: fix kerneldoc comment]
Link: https://lkml.kernel.org/r/20230911111730.2565537-1-agruenba@redhat.com
[akpm@linux-foundation.org: document kthread_stop_put()'s argument]
Link: https://lkml.kernel.org/r/20230907234048.2499820-1-agruenba@redhat.com
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON-based operation schemes are applied for every aggregation interval.
That was mainly because schemes were using nr_accesses, which be complete
to be used for every aggregation interval. However, the schemes are now
using nr_accesses_bp, which is updated for each sampling interval in a way
that reasonable to be used. Therefore, there is no reason to apply
schemes for each aggregation interval.
The unnecessary alignment with aggregation interval was also making some
use cases of DAMOS tricky. Quotas setting under long aggregation interval
is one such example. Suppose the aggregation interval is ten seconds, and
there is a scheme having CPU quota 100ms per 1s. The scheme will actually
uses 100ms per ten seconds, since it cannobe be applied before next
aggregation interval. The feature is working as intended, but the results
might not that intuitive for some users. This could be fixed by updating
the quota to 1s per 10s. But, in the case, the CPU usage of DAMOS could
look like spikes, and would actually make a bad effect to other
CPU-sensitive workloads.
Implement a dedicated timing interval for each DAMON-based operation
scheme, namely apply_interval. The interval will be sampling interval
aligned, and each scheme will be applied for its apply_interval. The
interval is set to 0 by default, and it means the scheme should use the
aggregation interval instead. This avoids old users getting any
behavioral difference.
Link: https://lkml.kernel.org/r/20230916020945.47296-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: implement DAMOS apply intervals".
DAMON-based operation schemes are applied for every aggregation interval.
That is mainly because schemes are using nr_accesses, which be complete to
be used for every aggregation interval.
This makes some DAMOS use cases be tricky. Quota setting under long
aggregation interval is one such example. Suppose the aggregation
interval is ten seconds, and there is a scheme having CPU quota 100ms per
1s. The scheme will actually uses 100ms per ten seconds, since it cannobe
be applied before next aggregation interval. The feature is working as
intended, but the results might not that intuitive for some users. This
could be fixed by updating the quota to 1s per 10s. But, in the case, the
CPU usage of DAMOS could look like spikes, and actually make a bad effect
to other CPU-sensitive workloads.
Also, with such huge aggregation interval, users may want schemes to be
applied more frequently.
DAMON provides nr_accesses_bp, which is updated for each sampling interval
in a way that reasonable to be used. By using that instead of
nr_accesses, DAMOS can have its own time interval and mitigate abovely
mentioned issues.
This patchset makes DAMOS schemes to use nr_accesses_bp instead of
nr_accesses, and have their own timing intervals. Also update DAMOS tried
regions sysfs files and DAMOS before_apply tracepoint to use the new data
as their source. Note that the interval is zero by default, and it is
interpreted to use the aggregation interval instead. This avoids making
user-visible behavioral changes.
Patches Seuqeunce
-----------------
The first patch (patch 1/9) makes DAMOS uses nr_accesses_bp instead of
nr_accesses, and following two patches (patches 2/9 and 3/9) updates DAMON
sysfs interface for DAMOS tried regions and the DAMOS before_apply
tracespoint to use nr_accesses_bp instead of nr_accesses, respectively.
The following two patches (patches 4/9 and 5/9) implements the
scheme-specific apply interval for DAMON kernel API users and update the
design document for the new feature.
Finally, the following four patches (patches 6/9, 7/9, 8/9 and 9/9) add
support of the feature in DAMON sysfs interface, add a simple selftest
test case, and document the new file on the usage and the ABI documents,
repsectively.
This patch (of 9):
DAMON provides nr_accesses_bp, which becomes same to nr_accesses * 10000
for every aggregation interval, but updated every sampling interval with a
reasonable accuracy. Since DAMON-based operation schemes are applied in
every aggregation interval using nr_accesses, using nr_accesses_bp instead
will make no difference to users. Meanwhile, it allows DAMOS to apply the
schemes in a time interval that less than the aggregation interval. It
could be useful and more flexible for some cases. Do it.
Link: https://lkml.kernel.org/r/20230916020945.47296-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20230916020945.47296-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The function is used by only mm/damon/core.c. Mark it as a static
function.
Link: https://lkml.kernel.org/r/20230915025251.72816-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_merge_regions_of(), which is called for each aggregation interval,
updates nr_accesses_bp to nr_accesses * 10000. However, nr_accesses_bp is
updated for each sampling interval via damon_moving_sum() using the
aggregation interval as the moving time window. And by the definition of
the algorithm, the value becomes same to discrete-window based sum for
each time window-aligned time. Hence, nr_accesses_bp will be same to
nr_accesses * 10000 for each aggregation interval without explicit update.
Remove the unnecessary update of nr_accesses_bp in
damon_merge_regions_of().
Link: https://lkml.kernel.org/r/20230915025251.72816-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let nr_accesses_bp be calculated as a pseudo-moving sum that updated for
every sampling interval, using damon_moving_sum(). This is assumed to be
useful for cases that the aggregation interval is set quite huge, but the
monivoting results need to be collected earlier than next aggregation
interval is passed.
Link: https://lkml.kernel.org/r/20230915025251.72816-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add yet another representation of the access rate of each region, namely
nr_accesses_bp. It is just same to the nr_accesses but represents the
value in basis point (1 in 10,000), and updated at once in every
aggregation interval. That is, moving_accesses_bp is just nr_accesses *
10000. This may seems useless at the moment. However, it will be useful
for representing less than one nr_accesses value that will be needed to
make moving sum-based nr_accesses.
Link: https://lkml.kernel.org/r/20230915025251.72816-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For values that continuously change, moving average or sum are good ways
to provide fast updates while handling temporal and errorneous variability
of the value. For example, the access rate counter (nr_accesses) is
calculated as a sum of the number of positive sampled access check results
that collected during a discrete time window (aggregation interval), and
hence it handles temporal and errorneous access check results, but
provides the update only for every aggregation interval. Using a moving
sum method for that could allow providing the value for every sampling
interval. That could be useful for getting monitoring results snapshot or
running DAMOS in fine-grained timing.
However, supporting the moving sum for cases that number of samples in the
time window is arbirary could impose high overhead, since the number of
past values that it needs to keep could be too high. The nr_accesses
would also be one of the cases. To mitigate the overhead, implement a
pseudo-moving sum function that only provides an estimated pseudo-moving
sum. It assumes there was no error in last discrete time window and
subtract constant portion of last discrete time window sum.
Note that the function is not strictly implementing the moving sum, but it
keeps a property of moving sum, which makes the value same to the
dsicrete-window based sum for each time window-aligned timing. Hence,
people collecting the value in the old timings would show no difference.
Link: https://lkml.kernel.org/r/20230915025251.72816-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: provide pseudo-moving sum based access rate".
DAMON checks the access to each region for every sampling interval,
increase the access rate counter of the region, namely nr_accesses, if the
access was made. For every aggregation interval, the counter is reset.
The counter is exposed to users to be used as a metric showing the
relative access rate (frequency) of each region. In other words, DAMON
provides access rate of each region in every aggregation interval. The
aggregation avoids temporal access pattern changes making things
confusing. However, this also makes a few DAMON-related operations to
unnecessarily need to be aligned to the aggregation interval. This can
restrict the flexibility of DAMON applications, especially when the
aggregation interval is huge.
To provide the monitoring results in finer-grained timing while keeping
handling of temporal access pattern change, this patchset implements a
pseudo-moving sum based access rate metric. It is pseudo-moving sum
because strict moving sum implementation would need to keep all values for
last time window, and that could incur high overhead of there could be
arbitrary number of values in a time window. Especially in case of the
nr_accesses, since the sampling interval and aggregation interval can
arbitrarily set and the past values should be maintained for every region,
it could be risky. The pseudo-moving sum assumes there were no temporal
access pattern change in last discrete time window to remove the needs for
keeping the list of the last time window values. As a result, it beocmes
not strict moving sum implementation, but provides a reasonable accuracy.
Also, it keeps an important property of the moving sum. That is, the
moving sum becomes same to discrete-window based sum at the time that
aligns to the time window. This means using the pseudo moving sum based
nr_accesses makes no change to users who shows the value for every
aggregation interval.
Patches Sequence
----------------
The sequence of the patches is as follows. The first four patches are for
preparation of the change. The first two (patches 1 and 2) implements a
helper function for nr_accesses update and eliminate corner case that
skips use of the function, respectively. Following two (patches 3 and 4)
respectively implement the pseudo-moving sum function and its simple unit
test case.
Two patches for making DAMON to use the pseudo-moving sum follow. The
fifthe one (patch 5) introduces a new field for representing the
pseudo-moving sum-based access rate of each region, and the sixth one
makes the new representation to actually updated with the pseudo-moving
sum function.
Last two patches (patches 7 and 8) makes followup fixes for skipping
unnecessary updates and marking the moving sum function as static,
respectively.
This patch (of 8):
Each DAMON operarions set is updating nr_accesses field of each
damon_region for each of their access check results, from the
check_accesses() callback. Directly accessing the field could make things
complex to manage and change in future. Define and use a dedicated
function for the purpose.
Link: https://lkml.kernel.org/r/20230915025251.72816-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20230915025251.72816-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON sleeps for sampling interval after each sampling, and check if the
aggregation interval and the ops update interval have passed using
ktime_get_coarse_ts64() and baseline timestamps for the intervals. That
design is for making the operations occur at deterministic timing
regardless of the time that spend for each work. However, it turned out
it is not that useful, and incur not-that-intuitive results.
After all, timer functions, and especially sleep functions that DAMON uses
to wait for specific timing, are not necessarily strictly accurate. It is
legal design, so no problem. However, depending on such inaccuracies, the
nr_accesses can be larger than aggregation interval divided by sampling
interval. For example, with the default setting (5 ms sampling interval
and 100 ms aggregation interval) we frequently show regions having
nr_accesses larger than 20. Also, if the execution of a DAMOS scheme
takes a long time, next aggregation could happen before enough number of
samples are collected. This is not what usual users would intuitively
expect.
Since access check sampling is the smallest unit work of DAMON, using the
number of passed sampling intervals as the DAMON-internal timer can easily
avoid these problems. That is, convert aggregation and ops update
intervals to numbers of sampling intervals that need to be passed before
those operations be executed, count the number of passed sampling
intervals, and invoke the operations as soon as the specific amount of
sampling intervals passed. Make the change.
Note that this could make a behavioral change to settings that using
intervals that not aligned by the sampling interval. For example, if the
sampling interval is 5 ms and the aggregation interval is 12 ms, DAMON
effectively uses 15 ms as its aggregation interval, because it checks
whether the aggregation interval after sleeping the sampling interval.
This change will make DAMON to effectively use 10 ms as aggregation
interval, since it uses 'aggregation interval / sampling interval *
sampling interval' as the effective aggregation interval, and we don't use
floating point types. Usual users would have used aligned intervals, so
this behavioral change is not expected to make any meaningful impact, so
just make this change.
Link: https://lkml.kernel.org/r/20230914021523.60649-1-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: add a tracepoint for damos apply target regions",
v2.
DAMON provides damon_aggregated tracepoint to let users record full
monitoring results. Sometimes, users need to record monitoring results of
specific pattern. DAMOS tried regions directory of DAMON sysfs interface
allows it, but the interface is mainly designed for snapshots and
therefore would be inefficient for such recording. Implement yet another
tracepoint for efficient support of the usecase.
This patch (of 2):
DAMON provides damon_aggregated tracepoint, which exposes details of each
region and its access monitoring results. It is useful for getting whole
monitoring results, e.g., for recording purposes.
For investigations of DAMOS, DAMON Sysfs interface provides DAMOS
statistics and tried_regions directory. But, those provides only
statistics and snapshots. If the scheme is frequently applied and if the
user needs to know every detail of DAMOS behavior, the snapshot-based
interface could be insufficient and expensive.
As a last resort, userspace users need to record the all monitoring
results via damon_aggregated tracepoint and simulate how DAMOS would
worked. It is unnecessarily complicated. DAMON kernel API users,
meanwhile, can do that easily via before_damos_apply() callback field of
'struct damon_callback', though.
Add a tracepoint that will be called just after before_damos_apply()
callback for more convenient investigations of DAMOS. The tracepoint
exposes all details about each regions, similar to damon_aggregated
tracepoint.
Please note that DAMOS is currently not only for memory management but
also for query-like efficient monitoring results retrievals (when 'stat'
action is used). Until now, only statistics or snapshots were supported.
Addition of this tracepoint allows efficient full recording of DAMOS-based
filtered monitoring results.
Link: https://lkml.kernel.org/r/20230913022050.2109-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20230913022050.2109-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> [tracing]
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_aggregateed tracepoint is receiving 'struct target *', but doesn't
use it. Remove it from the prototype.
Link: https://lkml.kernel.org/r/20230907022929.91361-12-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The comment on damon_set_attrs() says it should not be called while the
kdamond is running, but now some DAMON modules like sysfs interface and
DAMON_RECLAIM call it from after_aggregation() and/or
after_wmarks_check() callbacks for online tuning. Update the comment.
Link: https://lkml.kernel.org/r/20230907022929.91361-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
One DAMON context can have multiple monitoring targets, and DAMOS schemes
are applied to all targets. In some cases, users need to apply different
scheme to different targets. Retrieving monitoring results via DAMON
sysfs interface' 'tried_regions' directory could be one good example.
Also, there could be cases that cgroup DAMOS filter is not enough. All
such use cases can be worked around by having multiple DAMON contexts
having only single target, but it is inefficient in terms of resource
usage, thogh the overhead is not estimated to be huge.
Implement DAMON monitoring target based DAMOS filter for the case. Like
address range target DAMOS filter, handle these filters in the DAMON core
layer, since it is more efficient than doing in operations set layer.
This also means that regions that filtered out by monitoring target type
DAMOS filters are counted as not tried by the scheme. Hence, target
granularity monitoring results retrieval via DAMON sysfs interface becomes
available.
Link: https://lkml.kernel.org/r/20230802214312.110532-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Extend DAMOS filters for address ranges and DAMON monitoring
targets"
There are use cases that need to apply DAMOS schemes to specific address
ranges or DAMON monitoring targets. NUMA nodes in the physical address
space, special memory objects in the virtual address space, and monitoring
target specific efficient monitoring results snapshot retrieval could be
examples of such use cases. This patchset extends DAMOS filters feature
for such cases, by implementing two more filter types, namely address
ranges and DAMON monitoring types.
Patches sequence
----------------
The first seven patches are for the address ranges based DAMOS filter.
The first patch implements the filter feature and expose it via DAMON
kernel API. The second patch further expose the feature to users via
DAMON sysfs interface. The third and fourth patches implement unit tests
and selftests for the feature. Three patches (fifth to seventh) updating
the documents follow.
The following six patches are for the DAMON monitoring target based DAMOS
filter. The eighth patch implements the feature in the core layer and
expose it via DAMON's kernel API. The ninth patch further expose it to
users via DAMON sysfs interface. Tenth patch add a selftest, and two
patches (eleventh and twelfth) update documents.
[1] https://lore.kernel.org/damon/20230728203444.70703-1-sj@kernel.org/
This patch (of 13):
Users can know special characteristic of specific address ranges. NUMA
nodes or special objects or buffers in virtual address space could be such
examples. For such cases, DAMOS schemes could required to be applied to
only specific address ranges. Implement yet another type of DAMOS filter
for the purpose.
Note that the existing filter types, namely anon pages and memcg DAMOS
filters needed page level type check. Because such check can be done
efficiently in the opertions set layer, those filters are handled in
operations set layer. Specifically, only paddr operations set
implementation supports these filters. Also, because statistics counting
is done in the DAMON core layer, the regions that filtered out by these
filters are counted as tried but failed to the statistics.
Unlike those, address range based filters can efficiently handled in the
core layer. Hence, do the handling in the layer, and count the regions
that filtered out by those as the scheme has not tried for the region.
This difference should clearly documented.
Link: https://lkml.kernel.org/r/20230802214312.110532-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20230802214312.110532-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damos_new_filter() is not initializing the list field of newly allocated
filter object. However, DAMON sysfs interface and DAMON_RECLAIM are not
initializing it after calling damos_new_filter(). As a result, accessing
uninitialized memory is possible. Actually, adding multiple DAMOS filters
via DAMON sysfs interface caused NULL pointer dereferencing. Initialize
the field just after the allocation from damos_new_filter().
Link: https://lkml.kernel.org/r/20230729203733.38949-2-sj@kernel.org
Fixes: 98def236f63c ("mm/damon/core: implement damos filter")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
region->nr_accesses is the number of sampling intervals in the last
aggregation interval that access to the region has found, and region->age
is the number of aggregation intervals that its access pattern has
maintained. Hence, the real meaning of the two fields' values is
depending on current sampling and aggregation intervals.
This means the values need to be updated for every sampling and/or
aggregation intervals updates. As DAMON core doesn't, it is a duty of
in-kernel DAMON framework applications like DAMON sysfs interface, or the
userspace users.
Handling it in userspace or in-kernel DAMON application is complicated,
inefficient, and repetitive compared to doing the update in DAMON core.
Do the update in DAMON core.
Link: https://lkml.kernel.org/r/20230119013831.1911-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sometimes there is no scheme in damon's context, for example just use damo
record to monitor workload's data access pattern.
If current damon context doesn't have any scheme in the list, kdamond has
no need to iterate over list of all targets and regions but do nothing.
So, skip apply schemes when ctx->schemes is empty.
Link: https://lkml.kernel.org/r/20230116062347.1148553-1-huaisheng.ye@intel.com
Signed-off-by: Huaisheng Ye <huaisheng.ye@intel.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "implement DAMOS filtering for anon pages and/or specific
memory cgroups"
DAMOS let users do system operations in a data access pattern oriented
way. The data access pattern, which is extracted by DAMON, is somewhat
accurate more than what user space could know in many cases. However, in
some situation, users could know something more than the kernel about the
pattern or some special requirements for some types of memory or
processes. For example, some users would have slow swap devices and knows
latency-ciritical processes and therefore want to use DAMON-based
proactive reclamation (DAMON_RECLAIM) for only non-anonymous pages of
non-latency-critical processes.
For such restriction, users could exclude the memory regions from the
initial monitoring regions and use non-dynamic monitoring regions update
monitoring operations set including fvaddr and paddr. They could also
adjust the DAMOS target access pattern. For dynamically changing memory
layout and access pattern, those would be not enough.
To help the case, add an interface, namely DAMOS filters, which can be
used to avoid the DAMOS actions be applied to specific types of memory, to
DAMON kernel API (damon.h). At the moment, it supports filtering
anonymous pages and/or specific memory cgroups in or out for each DAMOS
scheme.
This patchset adds the support for all DAMOS actions that 'paddr'
monitoring operations set supports ('pageout', 'lru_prio', and
'lru_deprio'), and the functionality is exposed via DAMON kernel API
(damon.h) the DAMON sysfs interface (/sys/kernel/mm/damon/admins/), and
DAMON_RECLAIM module parameters.
Patches Sequence
----------------
First patch implements DAMOS filter interface to DAMON kernel API. Second
patch makes the physical address space monitoring operations set to
support the filters from all supporting DAMOS actions. Third patch adds
anonymous pages filter support to DAMON_RECLAIM, and the fourth patch
documents the DAMON_RECLAIM's new feature. Fifth to seventh patches
implement DAMON sysfs files for support of the filters, and eighth patch
connects the file to use DAMOS filters feature. Ninth patch adds simple
self test cases for DAMOS filters of the sysfs interface. Finally,
following two patches (tenth and eleventh) document the new features and
interfaces.
This patch (of 11):
DAMOS lets users do system operation in a data access pattern oriented
way. The data access pattern, which is extracted by DAMON, is somewhat
accurate more than what user space could know in many cases. However, in
some situation, users could know something more than the kernel about the
pattern or some special requirements for some types of memory or
processes. For example, some users would have slow swap devices and knows
latency-ciritical processes and therefore want to use DAMON-based
proactive reclamation (DAMON_RECLAIM) for only non-anonymous pages of
non-latency-critical processes.
For such restriction, users could exclude the memory regions from the
initial monitoring regions and use non-dynamic monitoring regions update
monitoring operations set including fvaddr and paddr. They could also
adjust the DAMOS target access pattern. For dynamically changing memory
layout and access pattern, those would be not enough.
To help the case, add an interface, namely DAMOS filters, which can be
used to avoid the DAMOS actions be applied to specific types of memory, to
DAMON kernel API (damon.h). At the moment, it supports filtering
anonymous pages and/or specific memory cgroups in or out for each DAMOS
scheme.
Note that this commit adds only the interface to the DAMON kernel API.
The impelmentation should be made in the monitoring operations sets, and
following commits will add that.
Link: https://lkml.kernel.org/r/20221205230830.144349-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20221205230830.144349-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "efficiently expose damos action tried regions information".
DAMON users can retrieve the monitoring results via 'after_aggregation'
callbacks if the user is using the kernel API, or 'damon_aggregated'
tracepoint if the user is in the user space. Those are useful if full
monitoring results are necessary. However, if the user has interest in
only a snapshot of the results for some regions having specific access
pattern, the interfaces could be inefficient. For example, some users
only want to know which memory regions are not accessed for more than a
specific time at the moment.
Also, some DAMOS users would want to know exactly to what memory regions
the schemes' actions tried to be applied, for a debugging or a tuning. As
DAMOS has its internal mechanism for quota and regions prioritization, the
users would need to simulate DAMOS' mechanism against the monitoring
results. That's unnecessarily complex.
This patchset implements DAMON kernel API callbacks and sysfs directory
for efficient exposure of the information for the use cases. The new
callback will be called for each region when a DAMOS action is gonna tried
to be applied to it. The sysfs directory will be called 'tried_regions'
and placed under each scheme sysfs directory. Users can write a special
keyworkd, 'update_schemes_regions', to the 'state' file of a kdamond sysfs
directory. Then, DAMON sysfs interface will fill the directory with the
information of regions that corresponding scheme action was tried to be
applied for next one aggregation interval.
Patches Sequence
----------------
The first one (patch 1) implements the callback for the kernel space
users. Following two patches (patches 2 and 3) implements sysfs
directories for the information and its sub directories. Two patches
(patches 4 and 5) for implementing the special keywords for filling the
data to and cleaning up the directories follow. Patch 6 adds a selftest
for the new sysfs directory. Finally, two patches (patches 7 and 8)
document the new feature in the administrator guide and the ABI document.
This patch (of 8):
Getting DAMON monitoring results of only specific access pattern (e.g.,
getting address ranges of memory that not accessed at all for two minutes)
can be useful for efficient monitoring of the system. The information can
also be helpful for deep level investigation of DAMON-based operation
schemes.
For that, users need to record (in case of the user space users) or
iterate (in case of the kernel space users) full monitoring results and
filter it out for the specific access pattern. In case of the DAMOS
investigation, users will even need to simulate DAMOS' quota and
prioritization mechanisms. It's inefficient and complex.
Add a new DAMON callback that will be called before each scheme is applied
to each region. DAMON kernel API users will be able to do the query-like
monitoring results collection, or DAMOS investigation in an efficient and
simple way using it.
Commits for providing the capability to the user space users will follow.
Link: https://lkml.kernel.org/r/20221101220328.95765-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20221101220328.95765-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMOS quota adjustment logic in 'kdamond_apply_schemes()', has some amount
of code, and the logic is not so straightforward. Split it out to a new
function for better readability.
Link: https://lkml.kernel.org/r/20221026225943.100429-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The function for applying a given DAMON scheme action to a given DAMON
region, 'damos_apply_scheme()' is not quite short. Make it better to read
by splitting out the stat update logic into a new function.
Link: https://lkml.kernel.org/r/20221026225943.100429-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The DAMOS action applying function, 'damon_do_apply_schemes()', is still
long and not easy to read. Split out the code for applying a single
action to a single region into a new function for better readability.
Link: https://lkml.kernel.org/r/20221026225943.100429-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: cleanup and refactoring code", v2.
This patchset cleans up and refactors a range of DAMON code including the
core, DAMON sysfs interface, and DAMON modules, for better readability and
convenient future feature implementations.
In detail, this patchset splits unnecessarily long and complex functions
in core into smaller functions (patches 1-4). Then, it cleans up the
DAMON sysfs interface by using more type-safe code (patch 5) and removing
unnecessary function parameters (patch 6). Further, it refactor the code
by distributing the code into multiple files (patches 7-10). Last two
patches (patches 11 and 12) deduplicates and remove unnecessary header
inclusion in DAMON modules (reclaim and lru_sort).
This patch (of 12):
The DAMOS action applying function, 'damon_do_apply_schemes()', is quite
long and not so simple. Split out the already quota-charged region skip
code, which is not a small amount of simple code, into a new function with
some comments for better readability.
Link: https://lkml.kernel.org/r/20221026225943.100429-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20221026225943.100429-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
refcounting errors in ZONE_DEVICE pages.
- Peter Xu fixes some userfaultfd test harness instability.
- Various other patches in MM, mainly fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY0j6igAKCRDdBJ7gKXxA
jnGxAP99bV39ZtOsoY4OHdZlWU16BUjKuf/cb3bZlC2G849vEwD+OKlij86SG20j
MGJQ6TfULJ8f1dnQDd6wvDfl3FMl7Qc=
=tbdp
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- fix a race which causes page refcounting errors in ZONE_DEVICE pages
(Alistair Popple)
- fix userfaultfd test harness instability (Peter Xu)
- various other patches in MM, mainly fixes
* tag 'mm-stable-2022-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (29 commits)
highmem: fix kmap_to_page() for kmap_local_page() addresses
mm/page_alloc: fix incorrect PGFREE and PGALLOC for high-order page
mm/selftest: uffd: explain the write missing fault check
mm/hugetlb: use hugetlb_pte_stable in migration race check
mm/hugetlb: fix race condition of uffd missing/minor handling
zram: always expose rw_page
LoongArch: update local TLB if PTE entry exists
mm: use update_mmu_tlb() on the second thread
kasan: fix array-bounds warnings in tests
hmm-tests: add test for migrate_device_range()
nouveau/dmem: evict device private memory during release
nouveau/dmem: refactor nouveau_dmem_fault_copy_one()
mm/migrate_device.c: add migrate_device_range()
mm/migrate_device.c: refactor migrate_vma and migrate_deivce_coherent_page()
mm/memremap.c: take a pgmap reference on page allocation
mm: free device private pages have zero refcount
mm/memory.c: fix race when faulting a device private page
mm/damon: use damon_sz_region() in appropriate place
mm/damon: move sz_damon_region to damon_sz_region
lib/test_meminit: add checks for the allocation functions
...
In many places we can use damon_sz_region() to instead of "r->ar.end -
r->ar.start".
Link: https://lkml.kernel.org/r/20220927001946.85375-2-xhao@linux.alibaba.com
Signed-off-by: Xin Hao <xhao@linux.alibaba.com>
Suggested-by: SeongJae Park <sj@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rename sz_damon_region() to damon_sz_region(), and move it to
"include/linux/damon.h", because in many places, we can to use this func.
Link: https://lkml.kernel.org/r/20220927001946.85375-1-xhao@linux.alibaba.com
Signed-off-by: Xin Hao <xhao@linux.alibaba.com>
Suggested-by: SeongJae Park <sj@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
not.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY0YhtwAKCRDdBJ7gKXxA
juJLAQDCa0g8sfe9cTw3PT1gRnn8gWLHEkMgUWVC/aBaqYFGeQEAta+g8muv9Tpd
qODv0JARH4cwONKEA24Oql+A5RnI6gQ=
=QZnW
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2022-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"Five hotfixes - three for nilfs2, two for MM. For are cc:stable, one
is not"
* tag 'mm-hotfixes-stable-2022-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
nilfs2: fix leak of nilfs_root in case of writer thread creation failure
nilfs2: fix NULL pointer dereference at nilfs_bmap_lookup_at_level()
nilfs2: fix use-after-free bug of struct nilfs_root
mm/damon/core: initialize damon_target->list in damon_new_target()
mm/hugetlb: fix races when looking up a CONT-PTE/PMD size hugetlb page
'struct damon_target' creation function, 'damon_new_target()' is not
initializing its '->list' field, unlike other DAMON structs creator
functions such as 'damon_new_region()'. Normal users of
'damon_new_target()' initializes the field by adding the target to DAMON
context's targets list, but some code could access the uninitialized
field.
This commit avoids the case by initializing the field in
'damon_new_target()'.
Link: https://lkml.kernel.org/r/20221002193130.8227-1-sj@kernel.org
Fixes: f23b8eee1871 ("mm/damon/core: implement region-based sampling")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The bodies of damon_{reclaim,lru_sort}_apply_parameters() contain
duplicates. This commit adds a common function
damon_set_region_biggest_system_ram_default() to remove the duplicates.
Link: https://lkml.kernel.org/r/6329f00d.a70a0220.9bb29.3678SMTPIN_ADDED_BROKEN@mx.google.com
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Suggested-by: SeongJae Park <sj@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There is no point in returning an int from damon_set_schemes(). It always
returns 0 which is meaningless for the caller, so change it to return void
directly.
Link: https://lkml.kernel.org/r/1663341635-12675-1-git-send-email-kaixuxia@tencent.com
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When the 'kdamond_wait_activation()' function or 'after_sampling()' or
'after_aggregation()' DAMON callbacks return an error, it is unnecessary
to use bool 'done' to check if kdamond should be finished. This commit
simplifies the kdamond stop mechanism by removing 'done' and break the
while loop directly in the cases.
Link: https://lkml.kernel.org/r/1663060287-30201-4-git-send-email-kaixuxia@tencent.com
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Number of parameters for 'damon_set_attrs()' is six. As it could be
confusing and verbose, this commit reduces the number by receiving single
pointer to a 'struct damon_attrs'.
Link: https://lkml.kernel.org/r/20220913174449.50645-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON monitoring attributes are directly defined as fields of 'struct
damon_ctx'. This makes 'struct damon_ctx' a little long and complicated.
This commit defines and uses a struct, 'struct damon_attrs', which is
dedicated for only the monitoring attributes to make the purpose of the
five values clearer and simplify 'struct damon_ctx'.
Link: https://lkml.kernel.org/r/20220913174449.50645-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The 'struct damos' creation function, 'damon_new_scheme()', does
initialization of private fileds of 'struct damos_quota' in it. As its
verbose and makes the function unnecessarily long, this commit factors it
out to separate function.
Link: https://lkml.kernel.org/r/20220913174449.50645-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The function for new 'struct damos' creation, 'damon_new_scheme()', copies
each field of the struct one by one, though it could simply copied via
struct to struct. This commit replaces the unnecessarily verbose
field-to-field copies with struct-to-struct copies to make code simple and
short.
Link: https://lkml.kernel.org/r/20220913174449.50645-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kdamond is implemented as a periodical split-merge pattern, which will
create and destroy regions possibly at high frequency (hundreds or even
thousands of per sec), depending on the number of regions and aggregation
period. In that case, kmalloc and kfree could bring speed and space
overheads, which can be improved by using a private kmem cache.
[set_pte_at@outlook.com: creating kmem cache for damon regions by KMEM_CACHE()]
Link: https://lkml.kernel.org/r/Message-ID:
Link: https://lkml.kernel.org/r/TYCP286MB2323DA1894FA55BB9CF90978CA449@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In lru_sort.c and reclaim.c, they are all defining get_monitoring_region()
function, there is no need to define it separately.
As 'get_monitoring_region()' is not a 'static' function anymore, we try to
use a prefix to distinguish with other functions, so there rename it to
'damon_find_biggest_system_ram'.
Link: https://lkml.kernel.org/r/20220909213606.136221-1-sj@kernel.org
Signed-off-by: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Suggested-by: SeongJae Park <sj@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When there are two or more non-contiguous regions intersecting with given
new ranges, 'damon_set_regions()' does not fill the holes. This commit
makes the function to fill the holes with newly created regions.
[sj@kernel.org: handle error from 'damon_fill_regions_holes()']
Link: https://lkml.kernel.org/r/20220913215420.57761-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20220909202901.57977-3-sj@kernel.org
Fixes: 3f49584b262c ("mm/damon: implement primitives for the virtual memory address spaces")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Yun Levi <ppbuk5246@gmail.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_new_scheme() has too many parameters, so introduce struct
damos_access_pattern to simplify it.
In additon, we can't use a bpf trace kprobe that has more than 5
parameters.
Link: https://lkml.kernel.org/r/20220908191443.129534-1-sj@kernel.org
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We iterate the whole regions list every time to get the first/last regions
intersecting with the specific range in damon_set_regions(), in order to
add new region or resize existing regions to fit in the specific range.
Actually, it is unnecessary to iterate the new added regions and the front
regions that have been checked. Just iterate the regions list from the
current point using list_for_each_entry_from() every time to improve
performance.
The kunit tests passed:
[PASSED] damon_test_apply_three_regions1
[PASSED] damon_test_apply_three_regions2
[PASSED] damon_test_apply_three_regions3
[PASSED] damon_test_apply_three_regions4
Link: https://lkml.kernel.org/r/1662477527-13003-1-git-send-email-kaixuxia@tencent.com
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The parameter 'struct damon_ctx *ctx' is unnecessary in damon region split
operation, so we can remove it.
Link: https://lkml.kernel.org/r/1660403943-29124-1-git-send-email-kaixuxia@tencent.com
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
