IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Group the MODULE_PARM definitions together to make them easier for
future maintenance, rather than having them spread across the file.
Signed-off-by: Frank Crawford <frank@crawford.emu.id.au>
Link: https://lore.kernel.org/r/20230121085754.1693336-2-frank@crawford.emu.id.au
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Fix mixed indentation to 4-spaces, remove unnecessary suffix from
i2c node name and use lower-case hex. No functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230118172237.349111-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
lower-case hex is expected for unit addresses:
adi,ltc2992.example.dts:22.24-38.15: Warning (i2c_bus_reg): /example-0/i2c/ltc2992@6F: I2C bus unit address format error, expected "6f"
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230118172237.349111-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The driver knows internally when a fan is not connected,
but does not export this knowledge to userspace. Use the
standard fanX_fault attributes to notify userspace if a
fan is not connected.
Tested on a Fujitsu DS3401-B1.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230105225107.58308-4-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Replace the nonstandard fanX_source attributes with the standardized
pwmX_auto_channels_temp attributes and document the special behaviour
associated with those attributes.
Tested on a Fujitsu DS3401-B1.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230105225107.58308-3-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Convert driver to use devm_hwmon_device_register_with_info()
to reduce module size by ~30%.
Tested on a Fujitsu DS3401-B1.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230105225107.58308-2-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
On various Gigabyte AM4 boards (AB350, AX370), the second Super-IO chip
(IT8792E) needs to be in configuration mode before accessing the first
due to a bug in IT8792E which otherwise results in LPC bus access errors.
This needs to be done before accessing the first Super-IO chip since
the second chip may have been accessed prior to loading this driver.
The problem is also reported to affect IT8795E, which is used on X299
boards and has the same chip ID as IT8792E (0x8733). It also appears
to affect systems with IT8790E, which is used on some Z97X-Gaming boards
as well as Z87X-OC, and other more recent Gigabyte boards.
Signed-off-by: Frank Crawford <frank@crawford.emu.id.au>
Link: https://lore.kernel.org/r/20230104060926.619686-3-frank@crawford.emu.id.au
[groeck: Made description pass checkpatch]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Allow for superio_enter to be called without requesting the muxed memory
region, in particular for initialisation of the second chipset, which must
be put into configuration mode, but without an associated call to leave
configuration mode.
Signed-off-by: Frank Crawford <frank@crawford.emu.id.au>
Link: https://lore.kernel.org/r/20230104060926.619686-2-frank@crawford.emu.id.au
[groeck: Clarified subject]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
New ASUS B650/B660/X670 boards firmware have not exposed WMI monitoring
GUID and entrypoint method WMBD could be implemented for different device
UID.
Implement the direct call to entrypoint method for monitoring the device
UID of B550/X570 boards.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204807
Signed-off-by: Denis Pauk <pauk.denis@gmail.com>
Co-developed-by: Ahmad Khalifa <ahmad@khalifa.ws>
Signed-off-by: Ahmad Khalifa <ahmad@khalifa.ws>
Link: https://lore.kernel.org/r/20230111212241.7456-1-pauk.denis@gmail.com
[groeck: Fix multi-line formatting]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use the correct function name in kernel-doc comments to prevent these
warnings:
drivers/hwmon/hih6130.c:164: warning: expecting prototype for hih6130_show_temperature(). Prototype was for hih6130_temperature_show() instead
drivers/hwmon/hih6130.c:185: warning: expecting prototype for hih6130_show_humidity(). Prototype was for hih6130_humidity_show() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
Link: https://lore.kernel.org/r/20230113064549.21289-1-rdunlap@infradead.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use the correct function names in kernel-doc comments to prevent these
warnings:
drivers/hwmon/sht15.c:682: warning: expecting prototype for sht15_show_status(). Prototype was for sht15_status_show() instead
drivers/hwmon/sht15.c:705: warning: expecting prototype for sht15_store_heater(). Prototype was for sht15_status_store() instead
drivers/hwmon/sht15.c:738: warning: expecting prototype for sht15_show_temp(). Prototype was for sht15_temp_show() instead
drivers/hwmon/sht15.c:760: warning: expecting prototype for sht15_show_humidity(). Prototype was for sht15_humidity_show() instead
drivers/hwmon/sht21.c:128: warning: expecting prototype for sht21_show_temperature(). Prototype was for sht21_temperature_show() instead
drivers/hwmon/sht21.c:149: warning: expecting prototype for sht21_show_humidity(). Prototype was for sht21_humidity_show() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
Link: https://lore.kernel.org/r/20230113064556.21685-1-rdunlap@infradead.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Fix kernel-doc warnings:
drivers/hwmon/emc2305.c:62: warning: Cannot understand * @cdev: cooling device;
on line 62 - I thought it was a doc line
drivers/hwmon/emc2305.c:89: warning: Cannot understand * @client: i2c client;
on line 89 - I thought it was a doc line
and drop ';' at end of each struct member line.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
Link: https://lore.kernel.org/r/20230113064540.20179-1-rdunlap@infradead.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Create documentation for the binding to support control of the fans on
HPE platforms.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230103203654.59322-3-nick.hawkins@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The GXP SoC can support up to 16 fans through the interface provided by
the CPLD. The current support is limited to 8 fans. The fans speeds are
controlled via 8 different PWMs which can vary in value from 0-255. The
fans are also capable of reporting if they have failed to the CPLD which
in turn reports the status to the GXP SoC.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Link: https://lore.kernel.org/r/20230103203654.59322-2-nick.hawkins@hpe.com
[groeck: Improved alignment of defined, added missing include linux/bits.h]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Coretemp's platform driver is unconventional. All the real work is done
globally by the initcall and CPU hotplug notifiers, while the "driver"
effectively just wraps an allocation and the registration of the hwmon
interface in a long-winded round-trip through the driver core. The whole
logic of dynamically creating and destroying platform devices to bring
the interfaces up and down is error prone, since it assumes
platform_device_add() will synchronously bind the driver and set drvdata
before it returns, thus results in a NULL dereference if drivers_autoprobe
is turned off for the platform bus. Furthermore, the unusual approach of
doing that from within a CPU hotplug notifier, already commented in the
code that it deadlocks suspend, also causes lockdep issues for other
drivers or subsystems which may want to legitimately register a CPU
hotplug notifier from a platform bus notifier.
All of these issues can be solved by ripping this unusual behaviour out
completely, simply tying the platform devices to the lifetime of the
module itself, and directly managing the hwmon interfaces from the
hotplug notifiers. There is a slight user-visible change in that
/sys/bus/platform/drivers/coretemp will no longer appear, and
/sys/devices/platform/coretemp.n will remain present if package n is
hotplugged off, but hwmon users should really only be looking for the
presence of the hwmon interfaces, whose behaviour remains unchanged.
Link: https://lore.kernel.org/lkml/20220922101036.87457-1-janusz.krzysztofik@linux.intel.com/
Link: https://gitlab.freedesktop.org/drm/intel/issues/6641
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Link: https://lore.kernel.org/r/20230103114620.15319-1-janusz.krzysztofik@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for reading four calculated virtual temp sensors on the
Aquacomputer Aquaero. Values of these sensors are calculated on the
device itself based on what the user configured in the official software.
Configuring these sensors is not currently reverse engineered.
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20230101190056.1357124-1-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Make the description of @aht10_data to @data in aht10_read_values()
and remove @client in aht10_init() to clear the below warnings:
drivers/hwmon/aht10.c:87: warning: Excess function parameter 'client' description in 'aht10_init'
drivers/hwmon/aht10.c:131: warning: Function parameter or member 'data' not described in 'aht10_read_values'
drivers/hwmon/aht10.c:131: warning: Excess function parameter 'aht10_data' description in 'aht10_read_values'
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3543
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20221223081056.88345-1-yang.lee@linux.alibaba.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use devm_watchdog_register_device() to let devres take care
of unregistering the watchdog at device removal. Remove the
now pointless fts_remove() function.
Tested on a Fujitsu DS3401-B1.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20221224041855.83981-4-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for the AYANEO AIR and AYANEO AIR Pro models of handheld
devices. These devices use the same EC registers and logic as the One X
Player mini AMD. Previous AYANEO models are not supported as they use a
different EC and do not have the necessary fan speed write enable and
setting registers. The driver is tested on AYANEO AIR while AIR Pro model
EC functionality and DMI data were verified using command line tools by
another user.
Add:
- AYANEO AIR (AMD 5560U)
- AYANEO AIR Pro (AMD 5560U)
- AYANEO AIR Pro (AMD 5825U)
While at it, fix spelling error (appart -> apart).
Link: https://lore.kernel.org/r/20221229025609.147482-1-derekjohn.clark@gmail.com
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
[groeck: Sanitize commit description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add device dependent serial number and firmware offsets to support
devices with different offsets. All currently supported devices share
the same offsets. Implemented by Aleksa Savic [1].
[1] 14c3acf78b
Originally-from: Aleksa Savic <savicaleksa83@gmail.com>
Signed-off-by: Leonard Anderweit <leonard.anderweit@gmail.com>
Link: https://lore.kernel.org/r/20221218113131.3752-5-leonard.anderweit@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Introduce structure for per device fan sensor offsets. This allows
reading fan sensors in aqc_raw_event() from devices which use a
different sensor layout in their status HID report. Currently only one
version is implemented as all supported devices use the same structure.
Signed-off-by: Leonard Anderweit <leonard.anderweit@gmail.com>
Link: https://lore.kernel.org/r/20221218113131.3752-4-leonard.anderweit@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Read flow sensors the same way for all devices instead of in special
cases. Implemented by Aleksa Savic [1].
[1] 1c10912c5f
Originally-from: Aleksa Savic <savicaleksa83@gmail.com>
Signed-off-by: Leonard Anderweit <leonard.anderweit@gmail.com>
Link: https://lore.kernel.org/r/20221218113131.3752-3-leonard.anderweit@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The MPQ7932 is a power management IC designed to operate from 5V buses to
power a variety of Advanced driver-assistance system SOCs. Six integrated
buck converters with hardware monitoring capability powers a variety of
target rails configurable over PMBus interface.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
Link: https://lore.kernel.org/r/20221207173716.123223-4-saravanan@linumiz.com
[groeck: Modified multi-line comments to match standard comment style]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The coretemp driver uses rdmsr_on_cpu calls to read
MSR_IA32_PACKAGE_THERM_STATUS/MSR_IA32_THERM_STATUS registers,
which contain information about current core temperature.
For certain low latency applications, the RDMSR interruption exceeds
the applications requirements.
So do not create core files in sysfs, for CPUs which have
isolation and nohz_full enabled.
Temperature information from the housekeeping cores should be
sufficient to infer die temperature.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Link: https://lore.kernel.org/r/Y5zT6B1mY9/pnwJV@tpad
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The find_last_bit() call produces the index of the highest-numbered
core in core_mask; because cores are numbered from zero, the number of
elements we need to allocate is one more than that.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Cc: stable@kernel.org # v5.18
Fixes: bf3608f338e9 ("hwmon: peci: Add cputemp driver")
Reviewed-by: Iwona Winiarska <iwona.winiarska@intel.com>
Link: https://lore.kernel.org/r/20230202021825.21486-1-zev@bewilderbeest.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Commit 4ef2774511dc ("hwmon: (nct6775) Convert register access to
regmap API") fumbled the shifting & masking of the fan_div values such
that odd-numbered fan divisors would always be set to zero. Fix it so
that we actually OR in the bits we meant to.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Fixes: 4ef2774511dc ("hwmon: (nct6775) Convert register access to regmap API")
Cc: stable@kernel.org # v5.19+
Link: https://lore.kernel.org/r/20230102212857.5670-1-zev@bewilderbeest.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
A user complained that the ftsteutates driver was displaying
bogus values since its introduction. This happens because the
sensor measurements need to be scaled in order to produce
meaningful results:
- the fan speed needs to be multiplied by 60 since its in RPS
- the temperature is in degrees celsius and needs an offset of 64
- the voltage is in 1/256 of 3.3V
The offical datasheet says the voltage needs to be divided by 256,
but this is likely an off-by-one-error, since even the BIOS
devides by 255 (otherwise 3.3V could not be measured).
The voltage channels additionally need a board-specific multiplier,
however this can be done by the driver since its board-specific.
The reason the missing scaling of measurements is the way Fujitsu
used this driver when it was still out-of-tree. Back then, all
scaling was done in userspace by libsensors, even the generic one.
Tested on a Fujitsu DS3401-B1.
Fixes: 08426eda58e0 ("hwmon: Add driver for FTS BMC chip "Teutates"")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20221224041855.83981-2-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
- Fix a use-after-free on the perf syscall's error path
- A potential integer overflow fix in amd_core_pmu_init()
- Fix the cgroup events tracking after the context handling rewrite
- Return the proper value from the inherit_event() function on error
-----BEGIN PGP SIGNATURE-----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=M9iU
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Pass only an initialized perf event attribute to the LSM hook
- Fix a use-after-free on the perf syscall's error path
- A potential integer overflow fix in amd_core_pmu_init()
- Fix the cgroup events tracking after the context handling rewrite
- Return the proper value from the inherit_event() function on error
* tag 'perf_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Call LSM hook after copying perf_event_attr
perf: Fix use-after-free in error path
perf/x86/amd: fix potential integer overflow on shift of a int
perf/core: Fix cgroup events tracking
perf core: Return error pointer if inherit_event() fails to find pmu_ctx
functionality like the rethunks and not only kgdb
- Remove __init section markings of two functions which are referenced by a
function in the .text section
-----BEGIN PGP SIGNATURE-----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=ZQnP
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Two fixes to correct how kprobes handles INT3 now that they're added
by other functionality like the rethunks and not only kgdb
- Remove __init section markings of two functions which are referenced
by a function in the .text section
* tag 'x86_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kprobes: Fix optprobe optimization check with CONFIG_RETHUNK
x86/kprobes: Fix kprobes instruction boudary check with CONFIG_RETHUNK
x86/calldepth: Fix incorrect init section references
- i915 fixes for newer platforms
- i915 locking rework to not give up in vm eviction fallback path too
early
-----BEGIN PGP SIGNATURE-----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=0nPr
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2023-01-01' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Daniel Vetter:
"I'm just back from the mountains, and Dave is out at the beach and
should be back in a week again. Just i915 fixes and since Rodrigo
bothered to make the pull last week I figured I should warm up gpg and
forward this in a nice signed tag as a new years present!
- i915 fixes for newer platforms
- i915 locking rework to not give up in vm eviction fallback path too
early"
* tag 'drm-fixes-2023-01-01' of git://anongit.freedesktop.org/drm/drm:
drm/i915/dsi: fix MIPI_BKLT_EN_1 native GPIO index
drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence
drm/i915/uc: Fix two issues with over-size firmware files
drm/i915: improve the catch-all evict to handle lock contention
drm/i915: Remove __maybe_unused from mtl_info
drm/i915: fix TLB invalidation for Gen12.50 video and compute engines
- Fix broken BuildID
- Add srcrpm-pkg to the help message
- Fix the option order for modpost built with musl libc
- Fix the build dependency of rpm-pkg for openSUSE
-----BEGIN PGP SIGNATURE-----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=yoFP
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix broken BuildID
- Add srcrpm-pkg to the help message
- Fix the option order for modpost built with musl libc
- Fix the build dependency of rpm-pkg for openSUSE
* tag 'kbuild-fixes-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
fixdep: remove unneeded <stdarg.h> inclusion
kbuild: sort single-targets alphabetically again
kbuild: rpm-pkg: add libelf-devel as alternative for BuildRequires
kbuild: Fix running modpost with musl libc
kbuild: add a missing line for help message
.gitignore: ignore *.rpm
arch: fix broken BuildID for arm64 and riscv
kconfig: Add static text for search information in help menu
