IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Current swap encoding in pte can't support large pfns
above 4TB. Change the swap encoding such that we put
the swap type in the PTE bits. Also add build checks
to make sure we don't overlap with HPTEFLAGS.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch changes the syscall handler to doom (tabort) active
transactions when a syscall is made and return very early without
performing the syscall and keeping side effects to a minimum (no CPU
accounting or system call tracing is performed). Also included is a
new HWCAP2 bit, PPC_FEATURE2_HTM_NOSC, to indicate this
behaviour to userspace.
Currently, the system call instruction automatically suspends an
active transaction which causes side effects to persist when an active
transaction fails.
This does change the kernel's behaviour, but in a way that was
documented as unsupported. It doesn't reduce functionality as
syscalls will still be performed after tsuspend; it just requires that
the transaction be explicitly suspended. It also provides a
consistent interface and makes the behaviour of user code
substantially the same across powerpc and platforms that do not
support suspended transactions (e.g. x86 and s390).
Performance measurements using
http://ozlabs.org/~anton/junkcode/null_syscall.c indicate the cost of
a normal (non-aborted) system call increases by about 0.25%.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* pm-clk:
PM / clk: Print acquired clock name in addition to con_id
PM / clk: Fix clock error check in __pm_clk_add()
drivers: sh: remove boilerplate code and use USE_PM_CLK_RUNTIME_OPS
arm: davinci: remove boilerplate code and use USE_PM_CLK_RUNTIME_OPS
arm: omap1: remove boilerplate code and use USE_PM_CLK_RUNTIME_OPS
arm: keystone: remove boilerplate code and use USE_PM_CLK_RUNTIME_OPS
PM / clock_ops: Provide default runtime ops to users
* pm-domains:
PM / Domains: Skip timings during syscore suspend/resume
* powercap:
powercap / RAPL: Support Knights Landing
powercap / RAPL: Floor frequency setting in Atom SoC
* pm-sleep:
PM / sleep: trace_device_pm_callback coverage in dpm_prepare/complete
PM / wakeup: add a dummy wakeup_source to record statistics
PM / sleep: Make suspend-to-idle-specific code depend on CONFIG_SUSPEND
PM / sleep: Return -EBUSY from suspend_enter() on wakeup detection
PM / tick: Add tracepoints for suspend-to-idle diagnostics
PM / sleep: Fix symbol name in a comment in kernel/power/main.c
leds / PM: fix hibernation on arm when gpio-led used with CPU led trigger
ARM: omap-device: use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS
bus: omap_l3_noc: add missed callbacks for suspend-to-disk
PM / sleep: Add macro to define common noirq system PM callbacks
PM / sleep: Refine diagnostic messages in enter_state()
PM / wakeup: validate wakeup source before activating it.
* pm-runtime:
PM / Runtime: Update last_busy in rpm_resume
PM / runtime: add note about re-calling in during device probe()
Hypervisors may deliver event 0x301 not only for standby
but also for reserved devices.
Just handle event 0x301 regardless of the device's state.
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Addresses from the usable space in [_ehead, _stext] lead to false
positives in DMA_API_DEBUG code (which will complain when an address
is in [_text, _etext]).
Avoid these warnings by not using that memory in case of
CONFIG_DMA_API_DEBUG=y.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The gemini code was installing its chained interrupt handler (which
enables the interrupt) before it was setting its data, which is bad if
the IRQ was previously pending. Avoid this problem by converting it to
irq_set_chained_handler_and_data().
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/E1Z4z07-0002SO-Gv@rmk-PC.arm.linux.org.uk
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Convert SA11x0 (Neponset, SA1111, and UCB1x00 code) to use the new
irq_set_chained_handler_and_data() helper.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/E1Z4yzx-0002S6-7p@rmk-PC.arm.linux.org.uk
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Stash the number of nodes in a physical processor package
locally and add an accessor to be called by interested parties.
The first user is the MCE injection module which uses it to find
the node base core in a package for injecting a certain type of
errors.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
[ Rewrote the commit message, merged it with the accessor patch and unified naming. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jacob Shin <jacob.w.shin@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: mchehab@osg.samsung.com
Link: http://lkml.kernel.org/r/1433868317-18417-2-git-send-email-Aravind.Gopalakrishnan@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This question has been asked many times, and finally I found the
official document which explains the problem of HPET on Baytrail,
that it will halt in deep idle states.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: john.stultz@linaro.org
Cc: len.brown@intel.com
Cc: matthew.lee@intel.com
Link: http://lkml.kernel.org/r/1434361201-31743-1-git-send-email-feng.tang@intel.com
[ Prettified things a bit. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We enable _CRS on all systems from 2008 and later. On older systems, we
ignore _CRS and assume the whole physical address space (excluding RAM and
other devices) is available for PCI devices, but on systems that support
physical address spaces larger than 4GB, it's doubtful that the area above
4GB is really available for PCI.
After d56dbf5bab8c ("PCI: Allocate 64-bit BARs above 4G when possible"), we
try to use that space above 4GB *first*, so we're more likely to put a
device there.
On Juan's Toshiba Satellite Pro U200, BIOS left the graphics, sound, 1394,
and card reader devices unassigned (but only after Windows had been
booted). Only the sound device had a 64-bit BAR, so it was the only device
placed above 4GB, and hence the only device that didn't work.
Keep _CRS enabled even on pre-2008 systems if they support physical address
space larger than 4GB.
Fixes: d56dbf5bab8c ("PCI: Allocate 64-bit BARs above 4G when possible")
Reported-and-tested-by: Juan Dayer <jdayer@outlook.com>
Reported-and-tested-by: Alan Horsfield <alan@hazelgarth.co.uk>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=99221
Link: https://bugzilla.opensuse.org/show_bug.cgi?id=907092
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v3.14+
The pnv_pci_ioda2_unset_window() function is used to do the final
cleanup of a DMA window being released:
- via VFIO ioctl by the guest request;
- via unplugging a virtual PCI function.
However the function was under #ifdef CONFIG_IOMMU_API and was missing.
This moves the helper outside of IOMMU_API block and enables it
for either or both IOMMU_API and PCI_IOV.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We'll want to build the opal-prd daemon with the prd headers, so include
this in the uapi headers list.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We currently have a bug in the PRD code, where the contents of an
incoming message (beyond the header) will be overwritten by the list
item manipulations when adding to to the prd_msg_queue.
This change reorders struct opal_prd_msg_queue_item, so that the
message body doesn't overlap the list_head.
We also clarify the memcpy of the message, as we're copying unnecessary
bytes at the end of the message data.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The eeh subsystem for powernv requires the opal event irqchip to be
initialised prior to initialisation or the following errors are
produced (and eeh doesn't work as expected):
irq: XICS didn't like hwirq-0x9 to VIRQ17 mapping (rc=-22)
pnv_eeh_post_init: Can't request OPAL event interrupt (0)
On powernv eeh is initialised from a subsys_initcall due to a check
for machine_is(powernv) in eeh_init(). This patch increases the
initcall priority of opal_event_init() to an arch_initcall to ensure
the opal event interface is initialised prior to any users of it.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Reported-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We check against compat_sp, but print out arm64's sp - fix it.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The memmap freeing code in free_unused_memmap() computes the end of
each memblock by adding the memblock size onto the base. However,
if SPARSEMEM is enabled then the value (start) used for the base
may already have been rounded downwards to work out which memmap
entries to free after the previous memblock.
This may cause memmap entries that are in use to get freed.
In general, you're not likely to hit this problem unless there
are at least 2 memblocks and one of them is not aligned to a
sparsemem section boundary. Note that carve-outs can increase
the number of memblocks by splitting the regions listed in the
device tree.
This problem doesn't occur with SPARSEMEM_VMEMMAP, because the
vmemmap code deals with freeing the unused regions of the memmap
instead of requiring the arch code to do it.
This patch gets the memblock base out of the memblock directly when
computing the block end address to ensure the correct value is used.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Commit 6c81fe7925cc4c42 ("arm64: enable context tracking") did not
update el0_sp_pc to use ct_user_exit, but this appears to have been
unintentional. In commit 6ab6463aeb5fbc75 ("arm64: adjust el0_sync so
that a function can be called") we made x0 available, and in the return
to userspace we call ct_user_enter in the kernel_exit macro.
Due to this, we currently don't correctly inform RCU of the user->kernel
transition, and may erroneously account for time spent in the kernel as
if we were in an extended quiescent state when CONFIG_CONTEXT_TRACKING
is enabled.
As we do record the kernel->user transition, a userspace application
making accesses from an unaligned stack pointer can demonstrate the
imbalance, provoking the following warning:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 3660 at kernel/context_tracking.c:75 context_tracking_enter+0xd8/0xe4()
Modules linked in:
CPU: 2 PID: 3660 Comm: a.out Not tainted 4.1.0-rc7+ #8
Hardware name: ARM Juno development board (r0) (DT)
Call trace:
[<ffffffc000089914>] dump_backtrace+0x0/0x124
[<ffffffc000089a48>] show_stack+0x10/0x1c
[<ffffffc0005b3cbc>] dump_stack+0x84/0xc8
[<ffffffc0000b3214>] warn_slowpath_common+0x98/0xd0
[<ffffffc0000b330c>] warn_slowpath_null+0x14/0x20
[<ffffffc00013ada4>] context_tracking_enter+0xd4/0xe4
[<ffffffc0005b534c>] preempt_schedule_irq+0xd4/0x114
[<ffffffc00008561c>] el1_preempt+0x4/0x28
[<ffffffc0001b8040>] exit_files+0x38/0x4c
[<ffffffc0000b5b94>] do_exit+0x430/0x978
[<ffffffc0000b614c>] do_group_exit+0x40/0xd4
[<ffffffc0000c0208>] get_signal+0x23c/0x4f4
[<ffffffc0000890b4>] do_signal+0x1ac/0x518
[<ffffffc000089650>] do_notify_resume+0x5c/0x68
---[ end trace 963c192600337066 ]---
This patch adds the missing ct_user_exit to the el0_sp_pc entry path,
correcting the context tracking for this case.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Fixes: 6c81fe7925cc ("arm64: enable context tracking")
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The GIC Hypervisor Configuration Register is used to enable
the delivery of virtual interupts to a guest, as well as to
define in which conditions maintenance interrupts are delivered
to the host.
This register doesn't contain any information that we need to
read back (the EOIcount is utterly useless for us).
So let's save ourselves some cycles, and not save it before
writing zero to it.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
According to the PSCI specification and the SMC/HVC calling
convention, PSCI function_ids that are not implemented must
return NOT_SUPPORTED as return value.
Current KVM implementation takes an unhandled PSCI function_id
as an error and injects an undefined instruction into the guest
if PSCI implementation is called with a function_id that is not
handled by the resident PSCI version (ie it is not implemented),
which is not the behaviour expected by a guest when calling a
PSCI function_id that is not implemented.
This patch fixes this issue by returning NOT_SUPPORTED whenever
the kvm PSCI call is executed for a function_id that is not
implemented by the PSCI kvm layer.
Cc: <stable@vger.kernel.org> # 3.18+
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The elr_el2 and spsr_el2 registers in fact contain the processor state
before entry into EL2. In the case of guest state it could be in either
el0 or el1.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The KVM-VFIO device is used by the QEMU VFIO device. It is used to
record the list of in-use VFIO groups so that KVM can manipulate
them.
Signed-off-by: Kim Phillips <kim.phillips@linaro.org>
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Until now we have been calling kvm_guest_exit after re-enabling
interrupts when we come back from the guest, but this has the
unfortunate effect that CPU time accounting done in the context of timer
interrupts occurring while the guest is running doesn't properly notice
that the time since the last tick was spent in the guest.
Inspired by the comment in the x86 code, move the kvm_guest_exit() call
below the local_irq_enable() call and change __kvm_guest_exit() to
kvm_guest_exit(), because we are now calling this function with
interrupts enabled. We have to now explicitly disable preemption and
not enable preemption before we've called kvm_guest_exit(), since
otherwise we could be preempted and everything happening before we
eventually get scheduled again would be accounted for as guest time.
At the same time, move the trace_kvm_exit() call outside of the atomic
section, since there is no reason for us to do that with interrupts
disabled.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
We already check KVM_CAP_IRQFD in generic once enable CONFIG_HAVE_KVM_IRQFD,
kvm_vm_ioctl_check_extension_generic()
|
+ switch (arg) {
+ ...
+ #ifdef CONFIG_HAVE_KVM_IRQFD
+ case KVM_CAP_IRQFD:
+ #endif
+ ...
+ return 1;
+ ...
+ }
|
+ kvm_vm_ioctl_check_extension()
So its not necessary to check this in arch again, and also fix one typo,
s/emlation/emulation.
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
On VM entry, we disable access to the VFP registers in order to
perform a lazy save/restore of these registers.
On VM exit, we restore access, test if we did enable them before,
and save/restore the guest/host registers if necessary. In this
sequence, the FPEXC register is always accessed, irrespective
of the trapping configuration.
If the guest didn't touch the VFP registers, then the HCPTR access
has now enabled such access, but we're missing a barrier to ensure
architectural execution of the new HCPTR configuration. If the HCPTR
access has been delayed/reordered, the subsequent access to FPEXC
will cause a trap, which we aren't prepared to handle at all.
The same condition exists when trapping to enable VFP for the guest.
The fix is to introduce a barrier after enabling VFP access. In the
vmexit case, it can be relaxed to only takes place if the guest hasn't
accessed its view of the VFP registers, making the access to FPEXC safe.
The set_hcptr macro is modified to deal with both vmenter/vmexit and
vmtrap operations, and now takes an optional label that is branched to
when the guest hasn't touched the VFP registers.
Reported-by: Vikram Sethi <vikrams@codeaurora.org>
Cc: stable@kernel.org # v3.9+
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Doorbell can be used to cause ipi on cpus which are sibling threads on
the same core. So icp_native_cause_ipi checks if the destination cpu
is a sibling thread of the current cpu and uses doorbell in such cases.
But while running with CONFIG_PREEMPT=y, since this section is
preemtible, we can run into issues if after we check if the destination
cpu is a sibling cpu, the task gets migrated from a sibling cpu to a
cpu on another core.
Fix this by using get_cpu()/ put_cpu()
Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
lapic.timer_mode was not properly initialized after migration, which
broke few useful things, like login, by making every sleep eternal.
Fix this by calling apic_update_lvtt in kvm_apic_post_state_restore.
There are other slowpaths that update lvtt, so this patch makes sure
something similar doesn't happen again by calling apic_update_lvtt
after every modification.
Cc: stable@vger.kernel.org
Fixes: f30ebc312ca9 ("KVM: x86: optimize some accesses to LVTT and SPIV")
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The kernel memtest utility is incredibly useful for detecting memory
problems, but sadly isn't in defconfig.
The memtest itself is only run when the user has explicitly passed a
memtest option on the kernel command line, so simply enabling the option
should not have a negative impact.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Vladimir Murzin <vladimir.murzin@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
section 6.2.17 _CCA states that ARM platforms require ACPI _CCA
object to be specified for DMA-cabpable devices. Therefore, this patch
specifies ACPI_CCA_REQUIRED in arm64 Kconfig.
In addition, to handle the case when _CCA is missing, arm64 would assign
dummy_dma_ops to disable DMA capability of the device.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The '__init aesni_init()' function calls the '__exit crypto_fpu_exit()'
function directly. Since they are in different sections, this generates
a warning.
make CONFIG_DEBUG_SECTION_MISMATCH=y
...
WARNING: arch/x86/crypto/aesni-intel.o(.init.text+0x12b): Section
mismatch in reference from the function init_module() to the function
.exit.text:crypto_fpu_exit()
The function __init init_module() references
a function __exit crypto_fpu_exit().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __exit annotation of
crypto_fpu_exit() so it may be used outside an exit section.
Fix the warning by removing the __exit annotation.
Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Although this init call checks for device tree properties before doing
anything, it should still only run on powernv machines.
Reviewed-by: Shreyas B Prabhu <shreyas@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull more MIPS fixes from Ralf Baechle:
"Another round of 4.1 MIPS fixes, one fix to a MIPS-specific #if
condition in lib/mpi, one fix to the MIPS GIC irqchip driver and one
SSB fix.
Details:
- fix handling of clock in chipco SSB driver.
- fix two MIPS-specific #if conditions to correctly work for GCC 5.1.
- fix damage to R6 pgtable bits done by XPA support.
- fix possible crash due to unloading modules that contain statically
defined platform devices.
- fix disabling of the MSA ASE on context switch to also work
correctly when a new thread/process has the CPU for the very first
time.
This is part of linux-next and has been beaten to death on
Imagination's test farm.
While things are not looking too grim this pull request also means the
rate of fixes for 4.1 remains nearly constant so I'd not be unhappy if
you'd delay the release"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MPI: MIPS: Fix compilation error with GCC 5.1
IRQCHIP: mips-gic: Don't nest calls to do_IRQ()
MIPS: MSA: bugfix - disable MSA correctly for new threads/processes.
MIPS: Loongson: Do not register 8250 platform device from module.
MIPS: Cobalt: Do not build MTD platform device registration code as module.
SSB: Fix handling of ssb_pmu_get_alp_clock()
MIPS: pgtable-bits: Fix XPA damage to R6 definitions.
Pull perf fixes from Ingo Molnar:
"A regression fix for a crash, and a Intel HSW uncore PMU driver fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "perf/x86/intel/uncore: Move uncore_box_init() out of driver initialization"
perf/x86/intel/uncore: Fix CBOX bit wide and UBOX reg on Haswell-EP
tlb.S has been removed since fa48e6f "arm64: mm: Optimise tlb flush logic
where we have >4K granule", so align comment with that.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
After secondary CPU boot or hotplug, the active_mm of the idle thread is
&init_mm. The init_mm.pgd (swapper_pg_dir) is only meant for TTBR1_EL1
and must not be set in TTBR0_EL1. Since when active_mm == &init_mm the
TTBR0_EL1 is already set to the reserved value, there is no need to
perform any context reset.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org>
So far, we configured the world-switch by having a small array
of pointers to the save and restore functions, depending on the
GIC used on the platform.
Loading these values each time is a bit silly (they never change),
and it makes sense to rely on the instruction patching instead.
This leads to a nice cleanup of the code.
Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add a new item to the feature set (ARM64_HAS_SYSREG_GIC_CPUIF)
to indicate that we have a system register GIC CPU interface
This will help KVM switching to alternative instruction patching.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add a new interface irq_remapping_cap() to detect whether irq
remapping supports new features, such as VT-d Posted-Interrupts.
Export the function, so that KVM code can check this and use this
mechanism properly.
Signed-off-by: Feng Wu <feng.wu@intel.com>
Reviewed-by: Jiang Liu <jiang.liu@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Joerg Roedel <joro@8bytes.org>
Cc: iommu@lists.linux-foundation.org
Cc: dwmw2@infradead.org
Link: http://lkml.kernel.org/r/1433827237-3382-10-git-send-email-feng.wu@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Interrupt chip callback to set the VCPU affinity for posted interrupts.
[ tglx: Use the helper function to copy from the remap irte instead of
open coding it. Massage the comment as well ]
Signed-off-by: Feng Wu <feng.wu@intel.com>
Reviewed-by: Jiang Liu <jiang.liu@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: joro@8bytes.org
Cc: dwmw2@infradead.org
Link: http://lkml.kernel.org/r/1433827237-3382-5-git-send-email-feng.wu@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Add a new member 'capability' to struct irq_remap_ops for storing
information about available capabilities such as VT-d
Posted-Interrupts.
Signed-off-by: Feng Wu <feng.wu@intel.com>
Reviewed-by: Jiang Liu <jiang.liu@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Joerg Roedel <joro@8bytes.org>
Cc: iommu@lists.linux-foundation.org
Cc: dwmw2@infradead.org
Link: http://lkml.kernel.org/r/1433827237-3382-2-git-send-email-feng.wu@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
I noticed that my MPX tracepoints were producing garbage for the
lower and upper bounds:
mpx_bounds_register_exception: address referenced: 0x00007fffffffccb7 bounds: lower: 0x0 ~upper: 0xffffffffffffffff
mpx_bounds_register_exception: address referenced: 0x00007fffffffccbf bounds: lower: 0x0 ~upper: 0xffffffffffffffff
This is, of course, bogus because 0x00007fffffffccbf is *within*
the bounds. I assumed that my instruction decoder was bad and
went looking at it. But I eventually realized that I was
getting a '0' offset back from xstate_offsets[BNDREGS].
It was being skipped in the initialization, which is obviously
bogus, so remove the extra leaf++.
This also goes an initializes xstate_offsets/sizes[] to -1 so
so that bugs like this will oops instead of silently failing
in interesting ways.
This was introduced by:
39f1acd ("x86/fpu/xstate: Don't assume the first zero xfeatures zero bit means the end")
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@sr71.net
Link: http://lkml.kernel.org/r/20150611193400.2E0B00DB@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When building without CONFIG_HOTPLUG_CPU, GCC complains (rightly) that
psci_tos_resident_on is unused:
arch/arm64/kernel/psci.c:61:13: warning: ‘psci_tos_resident_on’ defined but not used [-Wunused-function]
static bool psci_tos_resident_on(int cpu)
As it's only ever used when CONFIG_HOTPLUG_CPU is selected, let's move
it into the existing ifdef.
Signed-off-by: Will Deacon <will.deacon@arm.com>
[Mark: write commit message]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Now FPSIMD don't handle HOTPLUG_CPU. This introduces bug after cpu down/up process.
After cpu down/up process, the FPSMID hardware register is default value, not any
process's fpsimd context. when CPU_DEAD set cpu's fpsimd_state to NULL, it will force
to load the fpsimd context for the thread, to avoid the chance to skip to load the context.
If process A is the last user process on CPU N before cpu down, and the first user process
on the same CPU N after cpu up, A's fpsimd_state.cpu is the current cpu id,
and per_cpu(fpsimd_last_state) points A's fpsimd_state, so kernel will not reload the
context during it return to user space.
Signed-off-by: Janet Liu <janet.liu@spreadtrum.com>
Signed-off-by: Xiongshan An <xiongshan.an@spreadtrum.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
[catalin.marinas@arm.com: some mostly cosmetic clean-ups]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
