IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Expand the test with variants
- GSO_TEST_NO_GSO: payload size less than or equal to gso_size
- GSO_TEST_FRAGS: payload in both linear and page frags
- GSO_TEST_FRAGS_PURE: payload exclusively in page frags
- GSO_TEST_GSO_PARTIAL: produce one gso segment of multiple of gso_size,
plus optionally one non-gso trailer segment
Define a test struct that encodes the input gso skb and output segs.
Input in terms of linear and fragment lengths. Output as length of
each segment.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add unit testing for skb segment. This function is exercised by many
different code paths, such as GSO_PARTIAL or GSO_BY_FRAGS, linear
(with or without head_frag), frags or frag_list skbs, etc.
It is infeasible to manually run tests that cover all code paths when
making changes. The long and complex function also makes it hard to
establish through analysis alone that a patch has no unintended
side-effects.
Add code coverage through kunit regression testing. Introduce kunit
infrastructure for tests under net/core, and add this first test.
This first skb_segment test exercises a simple case: a linear skb.
Follow-on patches will parametrize the test and add more variants.
Tested: Built and ran the test with
make ARCH=um mrproper
./tools/testing/kunit/kunit.py run \
--kconfig_add CONFIG_NET=y \
--kconfig_add CONFIG_DEBUG_KERNEL=y \
--kconfig_add CONFIG_DEBUG_INFO=y \
--kconfig_add=CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y \
net_core_gso
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Although there is a kfree_skb_reason() helper function that can be used to
find the reason why this skb is dropped, but most callers didn't increase
one of rx_dropped, tx_dropped, rx_nohandler and rx_otherhost_dropped.
For the users, people are more concerned about why the dropped in ip
is increasing.
Introduce netdev_core_stats_inc() for trace the caller of
dev_core_stats_*_inc().
Also, add __code to netdev_core_stats_alloc(), as it's called with small
probability. And add noinline make sure netdev_core_stats_inc was never
inlined.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King says:
====================
net: dsa: remove validate method
These three patches remove DSA's phylink .validate method which becomes
unnecessary once the last two drivers provide phylink capabilities,
which this patch set adds. Both of these are best guesses.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
As all drivers now provide phylink capabilities (including MAC), the
if() condition in dsa_port_phylink_validate() will always be true. We
will always use the generic validator, which phylink will call itself
if the .validate method isn't populated. Thus, there is now no need to
implement the .validate method, so this implementation can be removed.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add phylink capabilities for dsa_loop, which I believe being a software
construct means that it supports essentially all interface types and
all speeds.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add phylink capabilities for vsc73xx. Although this switch driver does
populates the .adjust_link method, dsa_slave_phy_setup() will still be
used to create phylink instances for the LAN ports, although phylink
won't be used for shared links.
There are two different classes of switch - 5+1 and 8 port. The 5+1
port switches uses port indicies 0-4 for the user interfaces and 6 for
the CPU port. The 8 port is confusing - some comments in the driver
imply that port index 7 is used, but the driver actually still uses 6,
so that is what we go with. Also, there appear to be no DTs in the
kernel tree that are using the 8 port variety.
It also looks like port 5 is always skipped.
The switch supports 10M, 100M and 1G speeds. It is not clear whether
all these speeds are supported on the CPU interface. It also looks like
symmetric pause is supported, whether asymmetric pause is as well is
unclear. However, it looks like the pause configuration is entirely
static, and doesn't depend on negotiation results.
So, let's do the best effort we can based on the information found in
the driver when creating vsc73xx_phylink_get_caps().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The switch statement in netvsc_send_completion() is incorrectly validating
the length of incoming network packets by falling through to the next case.
Avoid the fallthrough. Instead break after a case match and then process
the complete() call.
The current code has not caused any known failures. But nonetheless, the
code should be corrected as a different ordering of the switch cases might
cause a length check to fail when it should not.
Signed-off-by: Sonia Sharma <sonia.sharma@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heng Qi says:
====================
virtio-net: Fix and update interrupt moderation
The setting of virtio coalescing parameters involves all-queues and
per queue, so we must be careful to synchronize the two.
Regarding napi_tx switching, this patch set is not only
compatible with the previous way of using tx-frames to switch napi_tx,
but also improves the user experience when setting interrupt parameters.
This patch set has been tested and was part of the previous netdim patch
set[1] and is now being split to be rolled out in steps.
[1] https://lore.kernel.org/all/20230811065512.22190-1-hengqi@linux.alibaba.com/
---
v2->v3:
1. Fix a tiny comment.
v1->v2:
1. Fix some minor comments and add ack tags.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Update a comment because virtio-net now supports both
VIRTIO_NET_F_NOTF_COAL and VIRTIO_NET_F_VQ_NOTF_COAL.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to the definition of virtqueue coalescing spec[1]:
Upon disabling and re-enabling a transmit virtqueue, the device MUST set
the coalescing parameters of the virtqueue to those configured through the
VIRTIO_NET_CTRL_NOTF_COAL_TX_SET command, or, if the driver did not set
any TX coalescing parameters, to 0.
Upon disabling and re-enabling a receive virtqueue, the device MUST set
the coalescing parameters of the virtqueue to those configured through the
VIRTIO_NET_CTRL_NOTF_COAL_RX_SET command, or, if the driver did not set
any RX coalescing parameters, to 0.
We need to add this setting for vq resize (ethtool -G) where vq_reset happens.
[1] https://lists.oasis-open.org/archives/virtio-dev/202303/msg00415.html
Fixes: 394bd87764b6 ("virtio_net: support per queue interrupt coalesce command")
Cc: Gavin Li <gavinl@nvidia.com>
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the user sets a non-zero coalescing parameter to 0 for a specific
virtqueue, it does not work as expected, so let's fix this.
Fixes: 394bd87764b6 ("virtio_net: support per queue interrupt coalesce command")
Reported-by: Xiaoming Zhao <zxm377917@alibaba-inc.com>
Cc: Gavin Li <gavinl@nvidia.com>
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When using .set_coalesce interface to set all queue coalescing
parameters, we need to update both per-queue and global save values.
Fixes: 394bd87764b6 ("virtio_net: support per queue interrupt coalesce command")
Cc: Gavin Li <gavinl@nvidia.com>
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since virtio-net allows switching napi_tx for per txq, we have to
get the specific txq's result now.
Fixes: 394bd87764b6 ("virtio_net: support per queue interrupt coalesce command")
Cc: Gavin Li <gavinl@nvidia.com>
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Background:
1. Commit 0c465be183c7 ("virtio_net: ethtool tx napi configuration") uses
tx-frames to toggle napi_tx (0 off and 1 on) if notification coalescing
is not supported.
2. Commit 31c03aef9bc2 ("virtio_net: enable napi_tx by default") enables
napi_tx for all txqs by default.
Status:
When virtio-net supports notification coalescing, after initialization,
tx-frames is 0 and napi_tx is true.
Problem:
When the user only wants to set rx coalescing params using
ethtool -C eth0 rx-usecs 10, or
ethtool -Q eth0 queue_mask 0x1 -C rx-usecs 10,
these cmds will carry tx-frames as 0, causing the napi_tx switching condition
is satisfied. Then the user gets:
netlink error: Device or resource busy.
The same happens when trying to set rx-frames, adaptive_rx, adaptive_tx...
How to fix:
When notification coalescing feature is negotiated, initially make the
value of tx-frames to be consistent with napi_tx.
For compatibility with the past, it is still supported to use tx-frames
to toggle napi_tx.
Reported-by: Xiaoming Zhao <zxm377917@alibaba-inc.com>
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is not necessary to call of_match_device() in probe. If we made it to
probe, then we've already successfully matched.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231006214421.339445-1-robh@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Petr Machata says:
====================
mlxsw: Fix -Wformat-truncation warnings
Ido Schimmel writes:
Commit 6d4ab2e97dcf ("extrawarn: enable format and stringop overflow
warnings in W=1") enabled format warnings as part of W=1 builds,
resulting in two new warnings in mlxsw. Fix both and target at net-next
as the warnings are not indicative of actual bugs.
====================
Link: https://lore.kernel.org/r/cover.1696600763.git.petrm@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ethtool stats strings cannot be longer than 32 characters
('ETH_GSTRING_LEN'), including the terminating null byte. The format
string '%.29s_%.1d' can exceed this limitation if the per-TC counter
name exceeds 28 characters. Together with the underscore, the two digits
of the TC (bounded at 16) and the terminating null byte, more than 32
characters will be used.
Fix this by bounding the counter name at 28 characters which suppresses
the following build warning [1]. This does not affect ethtool output
since the longest counter name does not exceed this limitation.
[1]
drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c: In function ‘mlxsw_sp_port_get_strings’:
drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:622:58: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
622 | snprintf(*p, ETH_GSTRING_LEN, "%.29s_%.1d",
| ^
In function ‘mlxsw_sp_port_get_tc_strings’,
inlined from ‘mlxsw_sp_port_get_strings’ at drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:677:4:
drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:622:17: note: ‘snprintf’ output between 3 and 33 bytes into a destination of size 32
622 | snprintf(*p, ETH_GSTRING_LEN, "%.29s_%.1d",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
623 | mlxsw_sp_port_hw_tc_stats[i].str, tc);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c: In function ‘mlxsw_sp_port_get_strings’:
drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:622:58: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
622 | snprintf(*p, ETH_GSTRING_LEN, "%.29s_%.1d",
| ^
In function ‘mlxsw_sp_port_get_tc_strings’,
inlined from ‘mlxsw_sp_port_get_strings’ at drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:677:4:
drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:622:17: note: ‘snprintf’ output between 3 and 33 bytes into a destination of size 32
622 | snprintf(*p, ETH_GSTRING_LEN, "%.29s_%.1d",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
623 | mlxsw_sp_port_hw_tc_stats[i].str, tc);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The name of a thermal zone device cannot be longer than 19 characters
('THERMAL_NAME_LENGTH - 1'). The format string 'mlxsw-lc%d-gearbox%d'
can exceed this limitation if the maximum number of line cards and the
maximum number of gearboxes on each line card cannot be represented
using a single digit.
This is not the case with current systems nor future ones. Therefore,
increase the size of the result buffer beyond 'THERMAL_NAME_LENGTH' and
suppress the following build warning [1].
If this limitation is ever exceeded, we will know about it since the
thermal core validates the thermal device's name during registration.
[1]
drivers/net/ethernet/mellanox/mlxsw/core_thermal.c: In function ‘mlxsw_thermal_gearboxes_init.constprop’:
drivers/net/ethernet/mellanox/mlxsw/core_thermal.c:543:71: error: ‘%d’ directive output may be truncated writing between 1 and 3 bytes into a region of size between 1 and 3
[-Werror=format-truncation=]
543 | snprintf(tz_name, sizeof(tz_name), "mlxsw-lc%d-gearbox%d",
| ^~
In function ‘mlxsw_thermal_gearbox_tz_init’,
inlined from ‘mlxsw_thermal_gearboxes_init.constprop’ at drivers/net/ethernet/mellanox/mlxsw/core_thermal.c:611:9:
drivers/net/ethernet/mellanox/mlxsw/core_thermal.c:543:52: note: directive argument in the range [1, 255]
543 | snprintf(tz_name, sizeof(tz_name), "mlxsw-lc%d-gearbox%d",
| ^~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/mellanox/mlxsw/core_thermal.c:543:17: note: ‘snprintf’ output between 19 and 23 bytes into a destination of size 20
543 | snprintf(tz_name, sizeof(tz_name), "mlxsw-lc%d-gearbox%d",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
544 | gearbox_tz->slot_index, gearbox_tz->module + 1);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Address an issue in ksz9477_acl_move_entries() where, in the scenario
(src_idx == dst_idx), ksz9477_validate_and_get_src_count() returns 0,
leading to usage of uninitialized src_count and dst_count variables,
which causes undesired behavior as it attempts to move ACL entries
around.
Fixes: 002841be134e ("net: dsa: microchip: Add partial ACL support for ksz9477 switches")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231006115822.144152-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
David Morley says:
====================
tcp: save flowlabel and use for receiver repathing
This patch series stores the last received ipv6 flowlabel. This last
received flowlabel is then used to help decide whether a packet is
likely an RTO retransmit or the result of a TLP. This new information
is used to better inform the flowlabel change decision for data
receivers.
====================
Link: https://lore.kernel.org/r/20231006011841.3558307-1-morleyd.kernel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This commit changes the data receiver repath behavior to occur after
receiving a single duplicate. This can help recover ACK connectivity
quicker if a TLP was sent along a nonworking path.
For instance, consider the case where we have an initially nonworking
forward path and reverse path and subsequently switch to only working
forward paths. Before this patch we would have the following behavior.
+---------+--------+--------+----------+----------+----------+
| Event | For FL | Rev FL | FP Works | RP Works | Data Del |
+---------+--------+--------+----------+----------+----------+
| Initial | A | 1 | N | N | 0 |
+---------+--------+--------+----------+----------+----------+
| TLP | A | 1 | N | N | 0 |
+---------+--------+--------+----------+----------+----------+
| RTO 1 | B | 1 | Y | N | 1 |
+---------+--------+--------+----------+----------+----------+
| RTO 2 | C | 1 | Y | N | 2 |
+---------+--------+--------+----------+----------+----------+
| RTO 3 | D | 2 | Y | Y | 3 |
+---------+--------+--------+----------+----------+----------+
This patch gets rid of at least RTO 3, avoiding additional unnecessary
repaths of a working forward path to a (potentially) nonworking one.
In addition, this commit changes the behavior to avoid repathing upon
rx of duplicate data if the local endpoint is in CA_Loss (in which
case the RTOs will already be changing the outgoing flowlabel).
Signed-off-by: David Morley <morleyd@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Tested-by: David Morley <morleyd@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In order to better estimate whether a data packet has been
retransmitted or is the result of a TLP, we save the last received
ipv6 flowlabel.
To make space for this field we resize the "ato" field in
inet_connection_sock as the current value of TCP_DELACK_MAX can be
fully contained in 8 bits and add a compile_time_assert ensuring this
field is the required size.
v2: addressed kernel bot feedback about dccp_delack_timer()
v3: addressed build error introduced by commit bbf80d713fe7 ("tcp:
derive delack_max from rto_min")
Signed-off-by: David Morley <morleyd@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Tested-by: David Morley <morleyd@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The code supports dumps with no input attributes currently
thru a combination of special-casing and luck.
Clean up the handling of ops with no inputs. Create empty
Structs, and skip printing of empty types.
This makes dos with no inputs work.
Tested-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Link: https://lore.kernel.org/r/20231006135032.3328523-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiri Pirko says:
====================
tools: ynl-gen: lift type requirement for attribute subsets
Remove the requirement from schema files to specify the "type" for
attribute subsets and adjust existing schema files.
====================
Link: https://lore.kernel.org/r/20231006114436.1725425-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
No longer needed to define type for subset attributes. Remove those.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20231006114436.1725425-3-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case an attribute is used in a subset, the type has to be currently
specified. As the attribute is already defined in the original set, this
is a redundant information in yaml file, moreover, may lead to
inconsistencies.
Example:
attribute-sets:
...
name: pin
enum-name: dpll_a_pin
attributes:
...
-
name: parent-id
type: u32
...
-
name: pin-parent-device
subset-of: pin
attributes:
-
name: parent-id
type: u32 <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Remove the requirement from schema files to specify the "type" for
attribute subsets.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20231006114436.1725425-2-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect `app_name` to be NUL-terminated:
dev_info(&oct->pci_dev->dev,
"Running %s (%llu Hz)\n",
app_name, CVM_CAST64(cs->corefreq));
... and it seems NUL-padding is not required, let's opt for strscpy().
For `oct->boardinfo.name/serial_number` let's opt for strscpy() as well
since it is expected to be NUL-terminated and does not require
NUL-padding as `oct` is zero-initialized in octeon_device.c +707:
| buf = vzalloc(size);
| if (!buf)
| return NULL;
|
| oct = (struct octeon_device *)buf;
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231005-strncpy-drivers-net-ethernet-cavium-liquidio-octeon_device-c-v1-1-9a207cef9438@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We know `fw_type` must be NUL-terminated based on use here:
| static bool fw_type_is_auto(void)
| {
| return strncmp(fw_type, LIO_FW_NAME_TYPE_AUTO,
| sizeof(LIO_FW_NAME_TYPE_AUTO)) == 0;
| }
...and here
| module_param_string(fw_type, fw_type, sizeof(fw_type), 0444);
Let's opt to NUL-pad the destination buffer as well so that we maintain
the same exact behavior that `strncpy` provided here.
A suitable replacement is `strscpy_pad` due to the fact that it
guarantees both NUL-termination and NUL-padding on the destination
buffer.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231005-strncpy-drivers-net-ethernet-cavium-liquidio-lio_main-c-v1-1-663e3f1d8f99@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver gained a .ndo_poll_controller() at a time where the TX
cleaning process was always done from NAPI which makes this unnecessary.
See commit ac3d9dd034e5 ("netpoll: make ndo_poll_controller() optional")
for more background.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Exit early if the list is empty.
Some applications using TCP zerocopy are calling
recvmsg( ... MSG_ERRQUEUE) and hit this case quite often,
probably because busy polling only deals with sk_receive_queue.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231005114504.642589-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The first pull request for v6.7, with both stack and driver changes.
We have a big change how locking is handled in cfg80211 and mac80211
which removes several locks and hopefully simplifies the locking
overall. In drivers rtw89 got MCC support and smaller features to
other active drivers but nothing out of ordinary.
This pull request got delayed because we were waiting for the wireless
tree pull requested processed first and after that we merged wireless
into wireless-next to avoid several conflicts in the stack.
When pulling this there's one conflict in drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c:
<<<<<<< HEAD
static int cfg80211_rtw_change_beacon(struct wiphy *wiphy,
struct net_device *ndev,
struct cfg80211_beacon_data *info)
=======
static int cfg80211_rtw_change_beacon(struct wiphy *wiphy, struct net_device *ndev,
struct cfg80211_ap_update *info)
>>>>>>> origin/merge-wireless-2023-10-05
Take the latter hunk which uses struct cfg80211_ap_update.
Major changes:
cfg80211
* remove wdev mutex, use the wiphy mutex instead
* annotate iftype_data pointer with sparse
* first kunit tests, for element defrag
* remove unused scan_width support
mac80211
* major locking rework, remove several locks like sta_mtx, key_mtx
etc. and use the wiphy mutex instead
* remove unused shifted rate support
* support antenna control in frame injection (requires driver support)
* convert RX_DROP_UNUSABLE to more detailed reason codes
rtw89
* TDMA-based multi-channel concurrency (MCC) support
iwlwifi
* support set_antenna() operation
* support frame injection antenna control
ath12k
* WCN7850: enable 320 MHz channels in 6 GHz band
* WCN7850: hardware rfkill support
* WCN7850: enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to make scan faster
ath11k
* add chip id board name while searching board-2.bin
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmUgHYERHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZtzIwf9Hn8lOUmbErtRmOjciesHoCvvjRelNuqG
ymUl/zdcXpl6ZEZZvvXTaUMFpbR1h8/8rfQABA91ADp/1ax4PKuIGtgBfkEkUelG
ONIbjJbYmPae8RZvAtBoy8k/QEt2NR97l1eRy+eqLovh273pFJu4eEW0AiLYJlZ8
rTAoej4RShhIvvh7O1zLt1It49tAFn+BwhDj6d3xCgdpmGJboJxwecEpqmJ0AVW9
pST5qDbANCbvfzElWswdCG48xludCtRG8WncJnkWjxeGqr+81yMrgIy+PQTwTAJ8
95Qe0sE9N5o9ZIE4hrdH+PuUYOCjD2O8IJFl6HkLeGh3Pr3+qGnxhQ==
=V52q
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-10-06' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.7
The first pull request for v6.7, with both stack and driver changes.
We have a big change how locking is handled in cfg80211 and mac80211
which removes several locks and hopefully simplifies the locking
overall. In drivers rtw89 got MCC support and smaller features to
other active drivers but nothing out of ordinary.
Major changes:
cfg80211
- remove wdev mutex, use the wiphy mutex instead
- annotate iftype_data pointer with sparse
- first kunit tests, for element defrag
- remove unused scan_width support
mac80211
- major locking rework, remove several locks like sta_mtx, key_mtx
etc. and use the wiphy mutex instead
- remove unused shifted rate support
- support antenna control in frame injection (requires driver support)
- convert RX_DROP_UNUSABLE to more detailed reason codes
rtw89
- TDMA-based multi-channel concurrency (MCC) support
iwlwifi
- support set_antenna() operation
- support frame injection antenna control
ath12k
- WCN7850: enable 320 MHz channels in 6 GHz band
- WCN7850: hardware rfkill support
- WCN7850: enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to make scan faster
ath11k
- add chip id board name while searching board-2.bin
* tag 'wireless-next-2023-10-06' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (272 commits)
wifi: rtlwifi: remove unreachable code in rtl92d_dm_check_edca_turbo()
wifi: rtw89: debug: txpwr table supports Wi-Fi 7 chips
wifi: rtw89: debug: show txpwr table according to chip gen
wifi: rtw89: phy: set TX power RU limit according to chip gen
wifi: rtw89: phy: set TX power limit according to chip gen
wifi: rtw89: phy: set TX power offset according to chip gen
wifi: rtw89: phy: set TX power by rate according to chip gen
wifi: rtw89: mac: get TX power control register according to chip gen
wifi: rtlwifi: use unsigned long for rtl_bssid_entry timestamp
wifi: rtlwifi: fix EDCA limit set by BT coexistence
wifi: rt2x00: fix MT7620 low RSSI issue
wifi: rtw89: refine bandwidth 160MHz uplink OFDMA performance
wifi: rtw89: refine uplink trigger based control mechanism
wifi: rtw89: 8851b: update TX power tables to R34
wifi: rtw89: 8852b: update TX power tables to R35
wifi: rtw89: 8852c: update TX power tables to R67
wifi: rtw89: regd: configure Thailand in regulation type
wifi: mac80211: add back SPDX identifier
wifi: mac80211: fix ieee80211_drop_unencrypted_mgmt return type/value
wifi: rtlwifi: cleanup few rtlxxxx_set_hw_reg() routines
...
====================
Link: https://lore.kernel.org/r/87jzrz6bvw.fsf@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds the BCM5221 PHY support by reusing brcm_fet_*()
callbacks and adding quirks for BCM5221 when needed.
Cc: Jim Reinhart <jimr@tekvox.com>
Cc: James Autry <jautry@tekvox.com>
Cc: Matthew Maron <matthewm@tekvox.com>
Signed-off-by: Giulio Benetti <giulio.benetti+tekvox@benettiengineering.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231005182915.153815-1-giulio.benetti@benettiengineering.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
i40e: House-keeping and clean-up
Ivan Vecera says:
The series makes some house-keeping tasks on i40e driver:
Patch 1: Removes unnecessary back pointer from i40e_hw
Patch 2: Moves I40E_MASK macro to i40e_register.h where is used
Patch 3: Refactors I40E_MDIO_CLAUSE* to use the common macro
Patch 4: Add header dependencies to <linux/avf/virtchnl.h>
Patch 5: Simplifies memory alloction functions
Patch 6: Moves mem alloc structures to i40e_alloc.h
Patch 7: Splits i40e_osdep.h to i40e_debug.h and i40e_io.h
Patch 8: Removes circular header deps, fixes and cleans headers
Patch 9: Moves DDP specific macros and structs to i40e_ddp.c
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
i40e: Move DDP specific macros and structures to i40e_ddp.c
i40e: Remove circular header dependencies and fix headers
i40e: Split i40e_osdep.h
i40e: Move memory allocation structures to i40e_alloc.h
i40e: Simplify memory allocation functions
virtchnl: Add header dependencies
i40e: Refactor I40E_MDIO_CLAUSE* macros
i40e: Move I40E_MASK macro to i40e_register.h
i40e: Remove back pointer from i40e_hw structure
====================
Link: https://lore.kernel.org/r/20231005162850.3218594-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
A suitable replacement is `strscpy` [2] due to the fact that it
guarantees NUL-termination on the destination buffer without
unnecessarily NUL-padding.
It should be noted that there doesn't currently exist a bug here as
DRV_NAME is a small string literal which means no overread bugs are
present.
Also to note, other ethernet drivers are using strscpy in a similar
pattern:
| dec/tulip/tulip_core.c
| 861: strscpy(info->driver, DRV_NAME, sizeof(info->driver));
|
| 8390/ax88796.c
| 582: strscpy(info->driver, DRV_NAME, sizeof(info->driver));
|
| dec/tulip/dmfe.c
| 1077: strscpy(info->driver, DRV_NAME, sizeof(info->driver));
|
| 8390/etherh.c
| 558: strscpy(info->driver, DRV_NAME, sizeof(info->driver));
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Lukasz Stelmach <l.stelmach@samsung.com>
Link: https://lore.kernel.org/r/20231005-strncpy-drivers-net-ethernet-asix-ax88796c_ioctl-c-v1-1-6fafdc38b170@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As we don't specify the MTU in the driver, the framework
will fall back to 1500 bytes and this doesn't work very
well when we try to attach a DSA switch:
eth1: mtu greater than device maximum
ixp4xx_eth c800a000.ethernet eth1: error -22 setting
MTU to 1504 to include DSA overhead
After locating an out-of-tree patch in OpenWrt I found
suitable code to set the MTU on the interface and ported
it and updated it. Now the MTU gets set properly.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231005-ixp4xx-eth-mtu-v4-1-08c66ed0bc69@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEDs2BvajyNKlf9TJQvlAcSiqKBOgFAmUfE5ETHG1rbEBwZW5n
dXRyb25peC5kZQAKCRC+UBxKKooE6H+OCACG8YWLFqa4J0CeRJ6DgUL1bpIGGTOZ
V5nDydDeFzl8AdMBt+Zr97Z9n9gBYG/E1yfLMH4h4bR8RgvT+O0o3zHa4vlx9Qzf
ArMqZE2Us05TkLOpLurMxs2ya2iR6PBaulDKq/lV2FLZJxPRcgHKc7lUPfjwoqeV
tIPZsCOLJXWtcux17pYrqZ/aY/t1f506PCklsTSR/XDFyNODKDT3FI3MrPnR0ZcP
uMi76k/HQC7e/1T70Wrp9IAKijORURo+OZJsOdgU9jcTGSdujcNE8j52ReMtTB+g
w1gDoXkRm2AR2o3xR+QctdPGy/q32B4FQGS6ChSZPnSMSNf1vCcJbhr9
=1OP/
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.7-20231005' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2023-10-05
The first patch is by Miquel Raynal and fixes a comment in the sja1000
driver.
Vincent Mailhol contributes 2 patches that fix W=1 compiler warnings
in the etas_es58x driver.
Jiapeng Chong's patch removes an unneeded NULL pointer check before
dev_put() in the CAN raw protocol.
A patch by Justin Stittreplaces a strncpy() by strscpy() in the
peak_pci sja1000 driver.
The next 5 patches are by me and fix the can_restart() handler and
replace BUG_ON()s in the CAN dev helpers with proper error handling.
The last 27 patches are also by me and target the at91_can driver.
First a new helper function is introduced, the at91_can driver is
cleaned up and updated to use the rx-offload helper.
* tag 'linux-can-next-for-6.7-20231005' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (37 commits)
can: at91_can: switch to rx-offload implementation
can: at91_can: at91_alloc_can_err_skb() introduce new function
can: at91_can: at91_irq_err_line(): send error counters with state change
can: at91_can: at91_irq_err_line(): make use of can_change_state() and can_bus_off()
can: at91_can: at91_irq_err_line(): take reg_sr into account for bus off
can: at91_can: at91_irq_err_line(): make use of can_state_get_by_berr_counter()
can: at91_can: at91_irq_err(): rename to at91_irq_err_line()
can: at91_can: at91_irq_err_frame(): move next to at91_irq_err()
can: at91_can: at91_irq_err_frame(): call directly from IRQ handler
can: at91_can: at91_poll_err(): increase stats even if no quota left or OOM
can: at91_can: at91_poll_err(): fold in at91_poll_err_frame()
can: at91_can: add CAN transceiver support
can: at91_can: at91_open(): forward request_irq()'s return value in case or an error
can: at91_can: at91_chip_start(): don't disable IRQs twice
can: at91_can: at91_set_bittiming(): demote register output to debug level
can: at91_can: rename struct at91_priv::{tx_next,tx_echo} to {tx_head,tx_tail}
can: at91_can: at91_setup_mailboxes(): update comments
can: at91_can: add more register definitions
can: at91_can: MCR Register: convert to FIELD_PREP()
can: at91_can: MSR Register: convert to FIELD_PREP()
...
====================
Link: https://lore.kernel.org/r/20231005195812.549776-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Resolve several conflicts, mostly between changes/fixes in
wireless and the locking rework in wireless-next. One of
the conflicts actually shows a bug in wireless that we'll
want to fix separately.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
This implements the led_hw_* hooks to support hardware blinking LEDs on
the DP83867 phy. The driver supports all LED modes that have a
corresponding TRIGGER_NETDEV_* define. Error and collision do not have
a TRIGGER_NETDEV_* define, so these modes are currently not supported.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> #TQMa8MxML/MBa8Mx
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct flow_action_entry.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1]
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct packet_fanout.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Anqi Shen <amy.saq@antgroup.com>
Cc: netdev@vger.kernel.org
Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1]
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
