IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240430085654.1028864-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Since the value for PWMOUT Target Duty Cycle register is a 9 bit
left-justified value that ranges from 0 to 511 and is contained in 2
bytes.
There is an issue that the PWM signal recorded by oscilloscope would
not be on consistently if we set PWM to 100% to the driver.
It is because the LSB of the 9 bit would always be zero if it just
left shift 8 bit for the value that write to PWMOUT Target Duty
Cycle register.
Therefore, revise the scale of the value that was written to pwm input
from 255 to 511 and modify the value to left-justified value.
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Link: https://lore.kernel.org/r/20240416022211.859483-1-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for NZXT Kraken 2023 (standard) and NZXT Kraken 2023 Elite
all-in-one CPU coolers. These models communicate identically to the NZXT
Kraken Z-series (Z53 code paths) in all cases except when writing the
fan curve, where setting additional bits in the report is needed.
Reviewed-by: Jonas Malaco <jonas@protocubo.io>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20240428104812.14037-3-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Prepare for the support of new models, for which the relationship
between device name (for hwmon and debugfs) and kind (for the selection
of appropriate code paths within this driver) will no longer be 1:1.
Originally-from: Jonas Malaco <jonas@protocubo.io>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20240428104812.14037-2-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Remove DMI tests for boards that are known to have issues with entering
configuration mode, as now we are testing the chips directly and no
longer need to rely on matching the board.
Leave the DMI table in place, for the nVIDIA board, and any future
expansions.
Signed-off-by: Frank Crawford <frank@crawford.emu.id.au>
Link: https://lore.kernel.org/r/20240428060653.2425296-5-frank@crawford.emu.id.au
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Major part of the change for the new method to avoid chipset issues.
The actual update does the following:
1) Lock the memory, but does not perform a SIO entry (previously it
would have performed an SIO entry).
2) Attempt to read the chipID. This should be safe no matter which
chip we have.
3) If step (2) fails, then perform SIO entry and retry chipID read. For
older chips and on failure it acts similarly to prior to this patch.
4) Set the sio_data->type, similar to previously.
5) If we have not performed an SIO entry, and this is not a chip type
with the NOCONF feature, then it will perform an SIO entry at this
point.
6) Proceed with setup as prior to this patch.
7) Any following access to the SIO registers will invoke the SIO entry
and SIO exit steps unless it is a chip with the NOCONF feature set.
This was set up in the previous patches in this patchset.
8) Update to the exit based on if it had performed a SIO entry or not.
Signed-off-by: Frank Crawford <frank@crawford.emu.id.au>
Link: https://lore.kernel.org/r/20240428060653.2425296-4-frank@crawford.emu.id.au
[groeck: s/intialised/initialized/]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Rename previous definitions to match the new information that they are
preinitialised as enabled and should not receive codes to enter or exit
configuration mode.
Signed-off-by: Frank Crawford <frank@crawford.emu.id.au>
Link: https://lore.kernel.org/r/20240428060653.2425296-2-frank@crawford.emu.id.au
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for Infineon XDP710.This is a Hot-Swap Controller.
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240425153608.4003782-2-peteryin.openbmc@gmail.com
[groeck: s/microOhmRsense/micro_ohm_osense/g; declared array static]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This addition adds in the ability for the system to scan
the EC chip in the Lenovo ThinkStation systems to get the
current fan RPM speeds the Maximum speed value for each
fan also provides the CPU, DIMM other thermal statuses
Signed-off-by: David Ober <dober6023@gmail.com>
Link: https://lore.kernel.org/r/20240328121250.331146-1-dober6023@gmail.com
[groeck: Dropped pointless case statements]
[Colin King: Fixed spelling error accesssible -> accessible]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for the adm1281 Hot-Swap Controller and Digital Power
and Energy Monitor
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jose Ramon San Buenaventura <jose.sanbuenaventura@analog.com>
Link: https://lore.kernel.org/r/20240425070948.25788-2-jose.sanbuenaventura@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The Intel Software Development manual defines the temperature digital
readout as the bits [22:16] of the IA32_[PACKAGE]_THERM_STATUS registers.
Bit 23 is specified as reserved.
In recent processors, however, the temperature digital readout uses bits
[23:16]. In those processors, using the bitmask 0x7f would lead to
incorrect readings if the temperature deviates from TjMax by more than
127 degrees Celsius.
Although not guaranteed, bit 23 is likely to be 0 in processors from a few
generations ago. The temperature reading would still be correct in those
processors when using a 0xff bitmask.
Model-specific provisions can be made for older processors in which bit 23
is not 0 should the need arise.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Link: https://lore.kernel.org/r/20240425171311.19519-4-ricardo.neri-calderon@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Last host driver supporting I2C_CLASS_SPD was i801. Now that I2C_CLASS_SPD
support has been removed there, we can remove it here too.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/3c4a1715-bfbb-4ae2-b35f-2f20f95e4932@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20240409085552.19868-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Commit 4e1008d8aae5 ("dt-bindings: hwmon: pmbus: adp1050: add bindings")
adds the ADP1050 HARDWARE MONITOR DRIVER section, but slips in a typo in
its file entry.
Fortunately, ./scripts/get_maintainer.pl --self-test=patterns complains
about this broken reference.
Fix the typo in ADP1050 HARDWARE MONITOR DRIVER maintainer entry.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20240402134203.8297-1-lukas.bulwahn@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.
Add mod_devicetable.h include.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240404191323.3547465-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This is a preparatory change to fulfill further conversion
the driver to be OF-independent. The independent code has
no analogue API that can read the value by index in the device
property array.
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240404191323.3547465-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
compile time. We thus need to add HAS_IOPORT as dependency for those
drivers using them.
Acked-by: Guenter Roeck <linux@roeck-us.net>
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20240404124700.3807842-2-schnelle@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use preferred i2c_get_match_data() instead of of_device_get_match_data()
to get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240325120952.3019767-4-andriy.shevchenko@linux.intel.com
[groeck: Dropped __maybe_unused from mp2975_of_match]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Constify the local variables pointing to "struct pmbus_driver_info" and
other encoding params to annotate the function is not modifying pointed
data.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240325120952.3019767-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The newly introduced SWAP() macro is quite generic by naming, but
moreover it's a repetition of the existing __assign_bit().
With this applied, add a missing bits.h (via now required bitops.h).
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240325120952.3019767-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for ADP1050 Digital Controller for Isolated Power Supplies
with PMBus interface Voltage, Current and Temperature Monitor.
The ADP1050 implements several features to enable a robust
system of parallel and redundant operation for customers who
require high availability. The device can measure voltage,
current and temperature that can be used in different
techniques to identify and safely shut down an erroneous
power supply in parallel operation mode.
Signed-off-by: Radu Sabau <radu.sabau@analog.com>
Link: https://lore.kernel.org/r/20240321142201.10330-2-radu.sabau@analog.com
[groeck: Fixed corrupted link in documentation]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add dt-bindings for adp1050 digital controller for isolated power supply
with pmbus interface voltage, current and temperature monitor.
Signed-off-by: Radu Sabau <radu.sabau@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240321142201.10330-1-radu.sabau@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This binding meets the requirements to be converted to dtschema
via trivial-devices.yaml.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240322-hwmon_dtschema-v3-5-6697de2a8228@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Convert existing binding to support validation.
This is a straightforward conversion with no new properties.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240322-hwmon_dtschema-v3-4-6697de2a8228@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Convert existing binding to support validation.
The binding has been renamed to match its compatible strings, with no
further additions.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240322-hwmon_dtschema-v3-2-6697de2a8228@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Convert existing binding to support validation.
This is a straightforward conversion with now new properties.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240322-hwmon_dtschema-v3-1-6697de2a8228@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Convert existing bindings to dtschema to support validation.
This is a straightforward conversion with no new properties.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240321-hwmon_yaml-v2-2-74fa8eb60ec9@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Convert existing bindings to dtschema to support validation.
This is a straightforward conversion with no new properties.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240320-hwmon_yaml-v1-1-a349ca21ccab@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The following error can be observed at boot:
[ 3.717920] ACPI Error: No handler for Region [SYSI] (00000000ab9e62c5) [IPMI] (20230628/evregion-130)
[ 3.717928] ACPI Error: Region IPMI (ID=7) has no handler (20230628/exfldio-261)
[ 3.717936] No Local Variables are initialized for Method [_GHL]
[ 3.717938] No Arguments are initialized for method [_GHL]
[ 3.717940] ACPI Error: Aborting method \_SB.PMI0._GHL due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
[ 3.717949] ACPI Error: Aborting method \_SB.PMI0._PMC due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
[ 3.717957] ACPI: \_SB_.PMI0: _PMC evaluation failed: AE_NOT_EXIST
On Dell systems several methods of acpi_power_meter access variables in
IPMI region [0], so wait until IPMI space handler is installed by
acpi_ipmi and also wait until SMI is selected to make the space handler
fully functional.
Since the dependency is inside BIOS's ASL code and it's not
discoverable, so use this fixup is a hack to workaround BIOS issue.
[0] https://www.dell.com/support/manuals/en-us/redhat-enterprise-linux-v8.0/rhel8_rn_pub/advanced-configuration-and-power-interface-acpi-error-messages-displayed-in-dmesg?guid=guid-0d5ae482-1977-42cf-b417-3ed5c3f5ee62
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20240320084317.366853-2-kai.heng.feng@canonical.com
[groeck: Simplified added code]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
On Dell servers, many APCI methods of acpi_power_meter module evaluate
variables inside IPMI region, so the region handler needs to be
installed. In addition to that, the handler needs to be fully
functional, and that depends on SMI being selected.
So add a helper to let acpi_power_meter know when the handler is
installed and ready to be used.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20240320084317.366853-1-kai.heng.feng@canonical.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Update links in the documentation and in-code comments which point to
the datasheet.
The current links don't work because National Semiconductor (which is the
original manufacturer of this chip) has been a part of Texas Instruments
since 2011 and http://www.national.com/ doesn't work anymore.
Fixes: e1a8e913f97e ("[PATCH] lm70: New hardware monitoring driver")
Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com>
Link: https://lore.kernel.org/r/20240318154540.90613-3-five231003@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Convert adc128d818 bindings to dtschema to support validation.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240319-adc128d818_dtschema-v2-1-0824a6d69493@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The MP2971/MP2973 use a custom 16bit register format for
SMBALERT_MASK which doesn't follow the PMBUS specification.
Map the PMBUS defined bits used by the common code onto the custom
format used by MPS and since the SMBALERT_MASK is currently never read
by common code only implement the mapping for write transactions.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Link: https://lore.kernel.org/r/20240318174406.3782306-1-naresh.solanki@9elements.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
- Deduplicate Kconfig entries for CONFIG_CXL_PMU
- Fix unselectable choice entry in MIPS Kconfig, and forbid this
structure
- Remove unused include/asm-generic/export.h
- Fix a NULL pointer dereference bug in modpost
- Enable -Woverride-init warning consistently with W=1
- Drop KCSAN flags from *.mod.c files
-----BEGIN PGP SIGNATURE-----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=tx+2
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Deduplicate Kconfig entries for CONFIG_CXL_PMU
- Fix unselectable choice entry in MIPS Kconfig, and forbid this
structure
- Remove unused include/asm-generic/export.h
- Fix a NULL pointer dereference bug in modpost
- Enable -Woverride-init warning consistently with W=1
- Drop KCSAN flags from *.mod.c files
* tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: Fix typo HEIGTH to HEIGHT
Documentation/llvm: Note s390 LLVM=1 support with LLVM 18.1.0 and newer
kbuild: Disable KCSAN for autogenerated *.mod.c intermediaries
kbuild: make -Woverride-init warnings more consistent
modpost: do not make find_tosym() return NULL
export.h: remove include/asm-generic/export.h
kconfig: do not reparent the menu inside a choice block
MIPS: move unselectable FIT_IMAGE_FDT_EPM5 out of the "System type" choice
cxl: remove CONFIG_CXL_PMU entry in drivers/cxl/Kconfig
-----BEGIN PGP SIGNATURE-----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=EzDx
-----END PGP SIGNATURE-----
Merge tag 'edac_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
- Fix more issues in the AMD FMPM driver
* tag 'edac_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
RAS: Avoid build errors when CONFIG_DEBUG_FS=n
RAS/AMD/FMPM: Safely handle saved records of various sizes
RAS/AMD/FMPM: Avoid NULL ptr deref in get_saved_records()
- Fix the IRQ sharing with pinctrl-amd and ACPI OSL
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmYJSYMACgkQEsHwGGHe
VUoWag//STcc2r8aw6PdAvtm0VlUqY1oTrvMK6jvJORXFYEFl+R9lMW7sg9jAsDo
fCcmRWFLD1dLy+eU+QNW4WNeqBlfODHKWQsxxtP9gl93qxvRAF6gvWW06JURvIoL
yqrJGj9P3X7WsccaQAhOPpDKg93yU+uXvhc3J3Edi0WXsdBZ2g6jsAFj35TbAPb/
DRl+8uFO3lGzF64ygg2hUFBPYE1tAEApbHrTpahQBHwiyA3iCKg0djgI9fnIM5E0
Q4mCtcs6JwkpRY5Z/QYLT/VJsrFmVrxRyBnPAWZ677x/QTfGZk/QKZ7kDkQuTh/k
jmfUVeJ4hnWmBg72GwYuahqKLlPlGUeG3iePQtw2rAKpDCU7xC3QMxbKzrVTCYKU
JG75uIzO7+0W0IBYLRAG+TYI/YVyK+UlbLV4AAu2QtEiqJ6pQ2ZLg9NcDtnJjNqU
CdwVgOeRGLLvQnKvS3Slj3+Z1wGEIFDE/w0dl9B0YEYMKiZNPoiClE/7VEA3b4Rn
Q8jsT9WoiiagFFwvkTpCofjvTgioOLXJ8h7adxREi9GSYQy2mxq8XsZQEViozM5W
mBVPRd2PCS7xIRwTBMehiK6Zta56z9h7RYhhpW2oPYy38/tHyhvvlyso9DF+I9pD
uQkOKfDDh26IRFBr0fMR8dD0Host8xDQS1h+hCwyi4iPX8sgB/A=
=80JR
-----END PGP SIGNATURE-----
Merge tag 'irq_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix an unused function warning on irqchip/irq-armada-370-xp
- Fix the IRQ sharing with pinctrl-amd and ACPI OSL
* tag 'irq_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/armada-370-xp: Suppress unused-function warning
genirq: Introduce IRQF_COND_ONESHOT and use it in pinctrl-amd
- Use the correct stalled cycles PMCs on AMD Zen2 and newer
- Fix detection of the LBR freeze feature on AMD
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmYJR3oACgkQEsHwGGHe
VUo/eRAAnGUq0rSi4ZUqsTtbu/jNepKbaeS7jR3/p3V6iSwfmjEoJ2xE6uIdN5vD
fnL6UkeDRMc8LaKHIdLD4ZbN8NRa3hOyzf5K7wwVp5bwle0NeyrcG5wVK8LgT/X/
rPSk7YxoR5frkYcA6zZwezJOv3HGYt8RMr5bKMD3YiJ35/XCdPsKnbHJTHb+F23Y
tYFBeyzRzOebQu0fFKP8ML9LbqvELESqJ5Smwu/jQ25aBW7sFsUNAxseGU2tYahX
c6pm8ytIlpZFwmi1HzXmMICF7lWugFO/KkP/ndCM1IpmujVGy56hrpLEy5gT3gzh
NE/nZDoqJAO2zhg2FuKybh3akdT+IgXUTjxYMYGUOkJIChzie3o4p9OqichgTIv5
+ngAq5qzjAHfC7cZ5nA96XWkw1fFU6BqlA3KPs1mzQU9uTDz7tSkyxIitp3C8L0B
JlilTr6yHUprJzFwCDk4hb+hfP5A9qYnrNeacMlldZmbH1jLYHEzB9FudK82MeM+
tIKFnM2jyRaRs/s8n+/UdrOVFNGk/+scX8GQllEBF451a8J5x1CYeHB7dGW+4pf/
cx5TupHg8dDRgNMsbaeEvwERoPu4h/VRozfBi6r1WjjskVm24lIdFFKTSm3BDbLk
EH3cflv/h8KE19cr0XLb7aYYw/9jb4cpnb0WBMw1gQOSvUMXzxU=
=gmta
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fixes from Borislav Petkov:
- Define the correct set of default hw events on AMD Zen4
- Use the correct stalled cycles PMCs on AMD Zen2 and newer
- Fix detection of the LBR freeze feature on AMD
* tag 'perf_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/amd/core: Define a proper ref-cycles event for Zen 4 and later
perf/x86/amd/core: Update and fix stalled-cycles-* events for Zen 2 and later
perf/x86/amd/lbr: Use freeze based on availability
x86/cpufeatures: Add new word for scattered features
