IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
nvme_passthrough_end can race with a reset, which can lead to
racing stores to the cels xarray as well as further shengians
with upcoming more complicated initialization.
So drop the call and just log that the controller capabilities
might have changed and a reset could be required to use the new
controller capabilities.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by Gerd Bayer <gbayer@linxu.ibm.com>
While the specification allows devices to either deallocate data
or to actually write zeroes on any Write Zeroes command, many SSDs
only do the sensible thing and deallocate data when the DEAC bit
is specific. Set it when it is supported and the caller doesn't
explicitly opt out of deallocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Allow all identify-namespace variants (CNS 00h, 05h and 08h) without
requiring CAP_SYS_ADMIN. The information (retrieved using id-ns) is
needed to form IO commands for passthrough interface.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Currently both io and admin commands are kept under a
coarse-granular CAP_SYS_ADMIN check, disregarding file mode completely.
$ ls -l /dev/ng*
crw-rw-rw- 1 root root 242, 0 Sep 9 19:20 /dev/ng0n1
crw------- 1 root root 242, 1 Sep 9 19:20 /dev/ng0n2
In the example above, ng0n1 appears as if it may allow unprivileged
read/write operation but it does not and behaves same as ng0n2.
This patch implements a shift from CAP_SYS_ADMIN to more fine-granular
control for io-commands.
If CAP_SYS_ADMIN is present, nothing else is checked as before.
Otherwise, following rules are in place
- any admin-cmd is not allowed
- vendor-specific and fabric commmand are not allowed
- io-commands that can write are allowed if matching FMODE_WRITE
permission is present
- io-commands that read are allowed
Add a helper nvme_cmd_allowed that implements above policy.
Change all the callers of CAP_SYS_ADMIN to go through nvme_cmd_allowed
for any decision making.
Since file open mode is counted for any approval/denial, change at
various places to keep file-mode information handy.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
sizeof( struct nvmefc_ls_rcv_op ) = 64
sizeof( union nvmefc_ls_requests ) = 1024
sizeof( union nvmefc_ls_responses ) = 128
So, in nvme_fc_rcv_ls_req(), 1216 bytes of memory are requested when
kzalloc() is called.
Because of the way memory allocations are performed, 2048 bytes are
allocated. So about 800 bytes are wasted for each request.
Switch to 3 distinct memory allocations, in order to:
- save these 800 bytes
- avoid zeroing this extra memory
- make sure that memory is properly aligned in case of DMA access
("fc_dma_map_single(lsop->rspbuf)" just a few lines below)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
There is no need to have a separate slab cache for each namespace,
and having separate ones creates duplicate debugs file names as well.
Fixes: d5eff33ee6 ("nvmet: add simple file backed ns support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
In order to test queue number changes we need to make sure that the
host reconnects. Because only when the host disconnects from the
target the number of queues are allowed to change according the spec.
The initial idea was to disable and re-enable the ports and have the
host wait until the KATO timer expires, triggering error
recovery. Though the host would see a DNR reply when trying to
reconnect. Because of the DNR bit the connection is dropped
completely. There is no point in trying to reconnect with the same
parameters according the spec.
We can force to reconnect the host is by deleting all controllers. The
host will observe any newly posted request to fail and thus starts the
error recovery but this time without the DNR bit set.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Use try_cmpxchg instead of cmpxchg (*ptr, old, new) == old in
nvmet_update_sq_head. x86 CMPXCHG instruction returns success in ZF flag, so
this change saves a compare after cmpxchg (and related move instruction in
front of cmpxchg).
Also, try_cmpxchg implicitly assigns old *ptr value to "old" when cmpxchg
fails. There is no need to re-read the value in the loop.
Note that the value from *ptr should be read using READ_ONCE to prevent
the compiler from merging, refetching or reordering the read.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Since model_number is allocated before it needs to be freed before
kmemdump_nul.
Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Reviewed-by: Dmitriy Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Aleksandr Miloserdov <a.miloserdov@yadro.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The driver is spamming the kernel logs for entirely harmless errors from
user space submitting unsupported commands. Just silence the errors.
The application has direct access to command status, so there's no need
to log these.
And since every passthrough command now uses the quiet flag, move the
setting to the common initializer.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Alan Adamson <alan.adamson@oracle.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Tested-by: Alan Adamson <alan.adamson@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
All controller namespaces share the same tagset, so we can use this
interface which does the optimal operation for parallel quiesce based on
the tagset type(e.g. blocking tagsets and non-blocking tagsets).
nvme connect_q should not be quiesced when quiesce tagset, so set the
QUEUE_FLAG_SKIP_TAGSET_QUIESCE to skip it when init connect_q.
Currently we use NVME_NS_STOPPED to ensure pairing quiescing and
unquiescing. If use blk_mq_[un]quiesce_tagset, NVME_NS_STOPPED will be
invalided, so introduce NVME_CTRL_STOPPED to replace NVME_NS_STOPPED.
In addition, we never really quiesce a single namespace. It is a better
choice to move the flag from ns to ctrl.
Signed-off-by: Chao Leng <lengchao@huawei.com>
[hch: rebased on top of prep patches]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221101150050.3510-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Nothing in blk_mq_wait_quiesce_done needs the request_queue now, so just
pass the tagset, and move the non-mq check into the only caller that
needs it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221101150050.3510-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
apple_nvme_reset_work schedules apple_nvme_remove, to be called, which
will call apple_nvme_disable and unquiesce the I/O queues.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221101150050.3510-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvme_remove_dead_ctrl schedules nvme_remove to be called, which will
call nvme_dev_disable and unquiesce the I/O queues.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221101150050.3510-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvme_kill_queues does two things:
1) mark the gendisk of all namespaces dead
2) unquiesce all I/O queues
These used to be be intertwined due to block layer issues, but aren't
any more. So move the unquiscing of the I/O queues into the callers,
and rename the rest of the function to the now more descriptive
nvme_mark_namespaces_dead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221101150050.3510-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
None of the callers of nvme_kill_queues needs it to unquiesce the
admin queues, as all of them already do it themselves:
1) nvme_reset_work explicit call nvme_start_admin_queue toward the
beginning of the function. The extra call to nvme_start_admin_queue
in nvme_reset_work this won't do anything as
NVME_CTRL_ADMIN_Q_STOPPED will already be cleared.
2) nvme_remove calls nvme_dev_disable with shutdown flag set to true at
the very beginning of the function if the PCIe device was not present,
which is the precondition for the call to nvme_kill_queues.
nvme_dev_disable already calls nvme_start_admin_queue toward the
end of the function when the shutdown flag is set to true, so the
admin queue is already enabled at this point.
3) nvme_remove_dead_ctrl schedules a workqueue to unbind the driver,
which will end up in nvme_remove, which calls nvme_dev_disable with
the shutdown flag. This case will call nvme_start_admin_queue a bit
later than before.
4) apple_nvme_remove uses the same sequence as nvme_remove_dead_ctrl
above.
5) nvme_remove_namespaces only calls nvme_kill_queues when the
controller is in the DEAD state. That can only happen in the PCIe
driver, and only from nvme_remove. See item 2) above for the
conditions there.
So it is safe to just remove the call to nvme_start_admin_queue in
nvme_kill_queues without replacement.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221101150050.3510-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
At the point where namespaces are marked dead, the controller is in a
non-live state and we won't get pass the identify commands.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221101150050.3510-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The NVME_NS_DEAD check only made sense when we revalidated namespaces
in nvme_passthrough_end for commands that affected the namespace inventory.
These days NVME_NS_DEAD is only set during reset or when tearing down
namespaces, and we always remove all namespaces right after that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221101150050.3510-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The call to nvme_remove_invalid_namespaces made sense when
nvme_passthru_end revalidated all namespaces and had to remove those that
didn't exist any more. Since we don't revalidate from nvme_passthru_end
now, this call is entirely spurious.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221101150050.3510-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The code to create, update or delete a tagset and namespaces in
nvme_reset_work is a bit convoluted. Refactor it with a two high-level
conditionals for first probe vs reset and I/O queues vs no I/O queues
to make the code flow more clear.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221101150050.3510-3-hch@lst.de
[axboe: fix whitespace issue]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvme and xen-blkfront are already doing this to stop buffered writes from
creating dirty pages that can't be written out later. Move it to the
common code.
This also removes the comment about the ordering from nvme, as bd_mutex
not only is gone entirely, but also hasn't been used for locking updates
to the disk size long before that, and thus the ordering requirement
documented there doesn't apply any more.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221101150050.3510-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=Zfnu
-----END PGP SIGNATURE-----
Merge tag 'block-6.1-2022-10-28' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- make the multipath dma alignment match the non-multipath one
(Keith Busch)
- fix a bogus use of sg_init_marker() (Nam Cao)
- fix circulr locking in nvme-tcp (Sagi Grimberg)
- Initialization fix for requests allocated via the special hw queue
allocator (John)
- Fix for a regression added in this release with the batched
completions of end_io backed requests (Ming)
- Error handling leak fix for rbd (Yang)
- Error handling leak fix for add_disk() failure (Yu)
* tag 'block-6.1-2022-10-28' of git://git.kernel.dk/linux:
blk-mq: Properly init requests from blk_mq_alloc_request_hctx()
blk-mq: don't add non-pt request with ->end_io to batch
rbd: fix possible memory leak in rbd_sysfs_init()
nvme-multipath: set queue dma alignment to 3
nvme-tcp: fix possible circular locking when deleting a controller under memory pressure
nvme-tcp: replace sg_init_marker() with sg_init_table()
block: fix memory leak for elevator on add_disk failure
NVMe spec requires all transports support dword aligned addresses, which
is already set in the namespace request_queue. Set the same limit in the
multipath device's request_queue as well.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When destroying a queue, when calling sock_release, the network stack
might need to allocate an skb to send a FIN/RST. When that happens
during memory pressure, there is a need to reclaim memory, which
in turn may ask the nvme-tcp device to write out dirty pages, however
this is not possible due to a ctrl teardown that is going on.
Set PF_MEMALLOC to the task that releases the socket to grant access
to PF_MEMALLOC reserves. In addition, do the same for the nvme-tcp
thread as this may also originate from the swap itself and should
be more resilient to memory pressure situations.
This fixes the following lockdep complaint:
--
======================================================
WARNING: possible circular locking dependency detected
6.0.0-rc2+ #25 Tainted: G W
------------------------------------------------------
kswapd0/92 is trying to acquire lock:
ffff888114003240 (sk_lock-AF_INET-NVME){+.+.}-{0:0}, at: tcp_sendpage+0x23/0xa0
but task is already holding lock:
ffffffff97e95ca0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x987/0x10d0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (fs_reclaim){+.+.}-{0:0}:
fs_reclaim_acquire+0x11e/0x160
kmem_cache_alloc_node+0x44/0x530
__alloc_skb+0x158/0x230
tcp_send_active_reset+0x7e/0x730
tcp_disconnect+0x1272/0x1ae0
__tcp_close+0x707/0xd90
tcp_close+0x26/0x80
inet_release+0xfa/0x220
sock_release+0x85/0x1a0
nvme_tcp_free_queue+0x1fd/0x470 [nvme_tcp]
nvme_do_delete_ctrl+0x130/0x13d [nvme_core]
nvme_sysfs_delete.cold+0x8/0xd [nvme_core]
kernfs_fop_write_iter+0x356/0x530
vfs_write+0x4e8/0xce0
ksys_write+0xfd/0x1d0
do_syscall_64+0x58/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
-> #0 (sk_lock-AF_INET-NVME){+.+.}-{0:0}:
__lock_acquire+0x2a0c/0x5690
lock_acquire+0x18e/0x4f0
lock_sock_nested+0x37/0xc0
tcp_sendpage+0x23/0xa0
inet_sendpage+0xad/0x120
kernel_sendpage+0x156/0x440
nvme_tcp_try_send+0x48a/0x2630 [nvme_tcp]
nvme_tcp_queue_rq+0xefb/0x17e0 [nvme_tcp]
__blk_mq_try_issue_directly+0x452/0x660
blk_mq_plug_issue_direct.constprop.0+0x207/0x700
blk_mq_flush_plug_list+0x6f5/0xc70
__blk_flush_plug+0x264/0x410
blk_finish_plug+0x4b/0xa0
shrink_lruvec+0x1263/0x1ea0
shrink_node+0x736/0x1a80
balance_pgdat+0x740/0x10d0
kswapd+0x5f2/0xaf0
kthread+0x256/0x2f0
ret_from_fork+0x1f/0x30
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
lock(sk_lock-AF_INET-NVME);
lock(fs_reclaim);
lock(sk_lock-AF_INET-NVME);
*** DEADLOCK ***
3 locks held by kswapd0/92:
#0: ffffffff97e95ca0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x987/0x10d0
#1: ffff88811f21b0b0 (q->srcu){....}-{0:0}, at: blk_mq_flush_plug_list+0x6b3/0xc70
#2: ffff888170b11470 (&queue->send_mutex){+.+.}-{3:3}, at: nvme_tcp_queue_rq+0xeb9/0x17e0 [nvme_tcp]
Fixes: 3f2304f8c6 ("nvme-tcp: add NVMe over TCP host driver")
Reported-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In nvme_tcp_ddgst_update(), sg_init_marker() is called with an
uninitialized scatterlist. This is probably fine, but gcc complains:
CC [M] drivers/nvme/host/tcp.o
In file included from ./include/linux/dma-mapping.h:10,
from ./include/linux/skbuff.h:31,
from ./include/net/net_namespace.h:43,
from ./include/linux/netdevice.h:38,
from ./include/net/sock.h:46,
from drivers/nvme/host/tcp.c:12:
In function ‘sg_mark_end’,
inlined from ‘sg_init_marker’ at ./include/linux/scatterlist.h:356:2,
inlined from ‘nvme_tcp_ddgst_update’ at drivers/nvme/host/tcp.c:390:2:
./include/linux/scatterlist.h:234:11: error: ‘sg.page_link’ is used uninitialized [-Werror=uninitialized]
234 | sg->page_link |= SG_END;
| ~~^~~~~~~~~~~
drivers/nvme/host/tcp.c: In function ‘nvme_tcp_ddgst_update’:
drivers/nvme/host/tcp.c:388:28: note: ‘sg’ declared here
388 | struct scatterlist sg;
| ^~
cc1: all warnings being treated as errors
Use sg_init_table() instead, which basically memset the scatterlist to
zero first before calling sg_init_marker().
Signed-off-by: Nam Cao <namcaov@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Now that blk_mq_destroy_queue does not release the queue reference, there
is no need for a second admin queue reference to be held by the
apple_nvme structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20221018135720.670094-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that blk_mq_destroy_queue does not release the queue reference, there
is no need for a second admin queue reference to be held by the nvme_dev.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20221018135720.670094-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The fact that blk_mq_destroy_queue also drops a queue reference leads
to various places having to grab an extra reference. Move the call to
blk_put_queue into the callers to allow removing the extra references.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20221018135720.670094-2-hch@lst.de
[axboe: fix fabrics_q vs admin_q conflict in nvme core.c]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The item passed into nvmet_subsys_attr_qid_max_show is not a member of
struct nvmet_port, it is part of nvmet_subsys. Hence, don't try to
dereference it as struct nvme_ctrl pointer.
Fixes: 3e980f5995 ("nvmet: Expose max queues to configfs")
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20220913064203.133536-1-dwagner@suse.de
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The keep alive timer needs to stay on nvmet_wq, and not
modified to reschedule on the system_wq.
This fixes a warning:
------------[ cut here ]------------
workqueue: WQ_MEM_RECLAIM
nvmet-wq:nvmet_rdma_release_queue_work [nvmet_rdma] is flushing
!WQ_MEM_RECLAIM events:nvmet_keep_alive_timer [nvmet]
WARNING: CPU: 3 PID: 1086 at kernel/workqueue.c:2628
check_flush_dependency+0x16c/0x1e0
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Fixes: 8832cf9221 ("nvmet: use a private workqueue instead of the system workqueue")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Recent commit 52fde2c07d ("nvme: set dma alignment to dword") has
caused a regression on our platform.
It turned out that the nvme_get_log() method invocation caused the
nvme_hwmon_data structure instance corruption. In particular the
nvme_hwmon_data.ctrl pointer was overwritten either with zeros or with
garbage. After some research we discovered that the problem happened
even before the actual NVME DMA execution, but during the buffer mapping.
Since our platform is DMA-noncoherent, the mapping implied the cache-line
invalidations or write-backs depending on the DMA-direction parameter.
In case of the NVME SMART log getting the DMA was performed
from-device-to-memory, thus the cache-invalidation was activated during
the buffer mapping. Since the log-buffer isn't cache-line aligned, the
cache-invalidation caused the neighbour data to be discarded. The
neighbouring data turned to be the data surrounding the buffer in the
framework of the nvme_hwmon_data structure.
In order to fix that we need to make sure that the whole log-buffer is
defined within the cache-line-aligned memory region so the
cache-invalidation procedure wouldn't involve the adjacent data. One of
the option to guarantee that is to kmalloc the DMA-buffer [1]. Seeing the
rest of the NVME core driver prefer that method it has been chosen to fix
this problem too.
Note after a deeper researches we found out that the denoted commit wasn't
a root cause of the problem. It just revealed the invalidity by activating
the DMA-based NVME SMART log getting performed in the framework of the
NVME hwmon driver. The problem was here since the initial commit of the
driver.
[1] Documentation/core-api/dma-api-howto.rst
Fixes: 400b6a7b13 ("nvme: Add hardware monitoring support")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Christoph Hellwig <hch@lst.de>
An NVMe controller works perfectly fine even when the hwmon
initialization fails. Stop returning errors that do not come from a
controller reset from nvme_hwmon_init to handle this case consistently.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
NVMe uses PRPs for data transfers and has no specific limit for a single
DMA segement. Limiting the size will cause problems because the block
layer assumes PRP-ish devices using a virt boundary mask don't have a
segment limit. And while this is true, we also really need to tell the
DMA mapping layer about it, otherwise dma-debug will trip over it.
Fixes: 5bd2927ace ("nvme-apple: Add initial Apple SoC NVMe driver")
Suggested-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
[hch: rewrote the commit message based on the PCIe commit]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Kingston SSDs do support NVMe Write_Zeroes cmd but take long time to
process. The firmware version is locked by these SSDs, we can not expect
firmware improvement, so disable Write_Zeroes cmd.
Signed-off-by: Xander Li <xander_li@kingston.com.tw>
Signed-off-by: Christoph Hellwig <hch@lst.de>
There is typo here so it releases the wrong variable. "ctrl->admin_q"
was intended instead of "ctrl->fabrics_q".
Fixes: fe60e8c534 ("nvme: add common helpers to allocate and free tagsets")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----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=M+mV
-----END PGP SIGNATURE-----
Merge tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull more random number generator updates from Jason Donenfeld:
"This time with some large scale treewide cleanups.
The intent of this pull is to clean up the way callers fetch random
integers. The current rules for doing this right are:
- If you want a secure or an insecure random u64, use get_random_u64()
- If you want a secure or an insecure random u32, use get_random_u32()
The old function prandom_u32() has been deprecated for a while
now and is just a wrapper around get_random_u32(). Same for
get_random_int().
- If you want a secure or an insecure random u16, use get_random_u16()
- If you want a secure or an insecure random u8, use get_random_u8()
- If you want secure or insecure random bytes, use get_random_bytes().
The old function prandom_bytes() has been deprecated for a while
now and has long been a wrapper around get_random_bytes()
- If you want a non-uniform random u32, u16, or u8 bounded by a
certain open interval maximum, use prandom_u32_max()
I say "non-uniform", because it doesn't do any rejection sampling
or divisions. Hence, it stays within the prandom_*() namespace, not
the get_random_*() namespace.
I'm currently investigating a "uniform" function for 6.2. We'll see
what comes of that.
By applying these rules uniformly, we get several benefits:
- By using prandom_u32_max() with an upper-bound that the compiler
can prove at compile-time is ≤65536 or ≤256, internally
get_random_u16() or get_random_u8() is used, which wastes fewer
batched random bytes, and hence has higher throughput.
- By using prandom_u32_max() instead of %, when the upper-bound is
not a constant, division is still avoided, because
prandom_u32_max() uses a faster multiplication-based trick instead.
- By using get_random_u16() or get_random_u8() in cases where the
return value is intended to indeed be a u16 or a u8, we waste fewer
batched random bytes, and hence have higher throughput.
This series was originally done by hand while I was on an airplane
without Internet. Later, Kees and I worked on retroactively figuring
out what could be done with Coccinelle and what had to be done
manually, and then we split things up based on that.
So while this touches a lot of files, the actual amount of code that's
hand fiddled is comfortably small"
* tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: remove unused functions
treewide: use get_random_bytes() when possible
treewide: use get_random_u32() when possible
treewide: use get_random_{u8,u16}() when possible, part 2
treewide: use get_random_{u8,u16}() when possible, part 1
treewide: use prandom_u32_max() when possible, part 2
treewide: use prandom_u32_max() when possible, part 1
When we revalidate paths as part of ns size change (as of commit
e7d65803e2), it is possible that during the path revalidation, the
only paths that is IO capable (i.e. optimized/non-optimized) are the
ones that ns resize was not yet informed to the host, which will cause
inflight requests to be requeued (as we have available paths but none
are IO capable). These requests on the requeue list are waiting for
someone to resubmit them at some point.
The IO capable paths will eventually notify the ns resize change to the
host, but there is nothing that will kick the requeue list to resubmit
the queued requests.
Fix this by always kicking the requeue list, and if no IO capable path
exists, these requests will be queued again.
A typical log that indicates that IOs are requeued:
--
nvme nvme1: creating 4 I/O queues.
nvme nvme1: new ctrl: "testnqn1"
nvme nvme2: creating 4 I/O queues.
nvme nvme2: mapped 4/0/0 default/read/poll queues.
nvme nvme2: new ctrl: NQN "testnqn1", addr 127.0.0.1:8009
nvme nvme1: rescanning namespaces.
nvme1n1: detected capacity change from 2097152 to 4194304
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
nvme nvme2: rescanning namespaces.
--
Reported-by: Yogev Cohen <yogev@lightbitslabs.com>
Fixes: e7d65803e2 ("nvme-multipath: revalidate paths during rescan")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Cc: <stable@vger.kernel.org> # v5.15+
Signed-off-by: Christoph Hellwig <hch@lst.de>
When we delete a controller, we execute the following:
1. nvme_stop_ctrl() - stop some work elements that may be
inflight or scheduled (specifically also .stop_ctrl
which cancels ctrl error recovery work)
2. nvme_remove_namespaces() - which first flushes scan_work
to avoid competing ns addition/removal
3. continue to teardown the controller
However, if err_work was scheduled to run in (1), it is designed to
cancel any inflight I/O, particularly I/O that is originating from ns
scan_work in (2), but because it is cancelled in .stop_ctrl(), we can
prevent forward progress of (2) as ns scanning is blocking on I/O
(that will never be cancelled).
The race is:
1. transport layer error observed -> err_work is scheduled
2. scan_work executes, discovers ns, generate I/O to it
3. nvme_ctop_ctrl() -> .stop_ctrl() -> cancel_work_sync(err_work)
- err_work never executed
4. nvme_remove_namespaces() -> flush_work(scan_work)
--> deadlock, because scan_work is blocked on I/O that was supposed
to be cancelled by err_work, but was cancelled before executing (see
stack trace [1]).
Fix this by flushing err_work instead of cancelling it, to force it
to execute and cancel all inflight I/O.
[1]:
--
Call Trace:
<TASK>
__schedule+0x390/0x910
? scan_shadow_nodes+0x40/0x40
schedule+0x55/0xe0
io_schedule+0x16/0x40
do_read_cache_page+0x55d/0x850
? __page_cache_alloc+0x90/0x90
read_cache_page+0x12/0x20
read_part_sector+0x3f/0x110
amiga_partition+0x3d/0x3e0
? osf_partition+0x33/0x220
? put_partition+0x90/0x90
bdev_disk_changed+0x1fe/0x4d0
blkdev_get_whole+0x7b/0x90
blkdev_get_by_dev+0xda/0x2d0
device_add_disk+0x356/0x3b0
nvme_mpath_set_live+0x13c/0x1a0 [nvme_core]
? nvme_parse_ana_log+0xae/0x1a0 [nvme_core]
nvme_update_ns_ana_state+0x3a/0x40 [nvme_core]
nvme_mpath_add_disk+0x120/0x160 [nvme_core]
nvme_alloc_ns+0x594/0xa00 [nvme_core]
nvme_validate_or_alloc_ns+0xb9/0x1a0 [nvme_core]
? __nvme_submit_sync_cmd+0x1d2/0x210 [nvme_core]
nvme_scan_work+0x281/0x410 [nvme_core]
process_one_work+0x1be/0x380
worker_thread+0x37/0x3b0
? process_one_work+0x380/0x380
kthread+0x12d/0x150
? set_kthread_struct+0x50/0x50
ret_from_fork+0x1f/0x30
</TASK>
INFO: task nvme:6725 blocked for more than 491 seconds.
Not tainted 5.15.65-f0.el7.x86_64 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:nvme state:D
stack: 0 pid: 6725 ppid: 1761 flags:0x00004000
Call Trace:
<TASK>
__schedule+0x390/0x910
? sched_clock+0x9/0x10
schedule+0x55/0xe0
schedule_timeout+0x24b/0x2e0
? try_to_wake_up+0x358/0x510
? finish_task_switch+0x88/0x2c0
wait_for_completion+0xa5/0x110
__flush_work+0x144/0x210
? worker_attach_to_pool+0xc0/0xc0
flush_work+0x10/0x20
nvme_remove_namespaces+0x41/0xf0 [nvme_core]
nvme_do_delete_ctrl+0x47/0x66 [nvme_core]
nvme_sysfs_delete.cold.96+0x8/0xd [nvme_core]
dev_attr_store+0x14/0x30
sysfs_kf_write+0x38/0x50
kernfs_fop_write_iter+0x146/0x1d0
new_sync_write+0x114/0x1b0
? intel_pmu_handle_irq+0xe0/0x420
vfs_write+0x18d/0x270
ksys_write+0x61/0xe0
__x64_sys_write+0x1a/0x20
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x61/0xcb
--
Fixes: 3f2304f8c6 ("nvme-tcp: add NVMe over TCP host driver")
Reported-by: Jonathan Nicklin <jnicklin@blockbridge.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Jonathan Nicklin <jnicklin@blockbridge.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When we delete a controller, we execute the following:
1. nvme_stop_ctrl() - stop some work elements that may be
inflight or scheduled (specifically also .stop_ctrl
which cancels ctrl error recovery work)
2. nvme_remove_namespaces() - which first flushes scan_work
to avoid competing ns addition/removal
3. continue to teardown the controller
However, if err_work was scheduled to run in (1), it is designed to
cancel any inflight I/O, particularly I/O that is originating from ns
scan_work in (2), but because it is cancelled in .stop_ctrl(), we can
prevent forward progress of (2) as ns scanning is blocking on I/O
(that will never be cancelled).
The race is:
1. transport layer error observed -> err_work is scheduled
2. scan_work executes, discovers ns, generate I/O to it
3. nvme_ctop_ctrl() -> .stop_ctrl() -> cancel_work_sync(err_work)
- err_work never executed
4. nvme_remove_namespaces() -> flush_work(scan_work)
--> deadlock, because scan_work is blocked on I/O that was supposed
to be cancelled by err_work, but was cancelled before executing.
Fix this by flushing err_work instead of cancelling it, to force it
to execute and cancel all inflight I/O.
Fixes: b435ecea2a ("nvme: Add .stop_ctrl to nvme ctrl ops")
Fixes: f6c8e432cb ("nvme: flush namespace scanning work just before removing namespaces")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The prandom_u32() function has been a deprecated inline wrapper around
get_random_u32() for several releases now, and compiles down to the
exact same code. Replace the deprecated wrapper with a direct call to
the real function. The same also applies to get_random_int(), which is
just a wrapper around get_random_u32(). This was done as a basic find
and replace.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz> # for ext4
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake
Acked-by: Chuck Lever <chuck.lever@oracle.com> # for nfsd
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # for thunderbolt
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Acked-by: Helge Deller <deller@gmx.de> # for parisc
Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-----BEGIN PGP SIGNATURE-----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=nwLk
-----END PGP SIGNATURE-----
Merge tag 'for-6.1/passthrough-2022-10-04' of git://git.kernel.dk/linux
Pull passthrough updates from Jens Axboe:
"With these changes, passthrough NVMe support over io_uring now
performs at the same level as block device O_DIRECT, and in many cases
6-8% better.
This contains:
- Add support for fixed buffers for passthrough (Anuj, Kanchan)
- Enable batched allocations and freeing on passthrough, similarly to
what we support on the normal storage path (me)
- Fix from Geert fixing an issue with !CONFIG_IO_URING"
* tag 'for-6.1/passthrough-2022-10-04' of git://git.kernel.dk/linux:
io_uring: Add missing inline to io_uring_cmd_import_fixed() dummy
nvme: wire up fixed buffer support for nvme passthrough
nvme: pass ubuffer as an integer
block: extend functionality to map bvec iterator
block: factor out blk_rq_map_bio_alloc helper
block: rename bio_map_put to blk_mq_map_bio_put
nvme: refactor nvme_alloc_request
nvme: refactor nvme_add_user_metadata
nvme: Use blk_rq_map_user_io helper
scsi: Use blk_rq_map_user_io helper
block: add blk_rq_map_user_io
io_uring: introduce fixed buffer support for io_uring_cmd
io_uring: add io_uring_cmd_import_fixed
nvme: enable batched completions of passthrough IO
nvme: split out metadata vs non metadata end_io uring_cmd completions
block: allow end_io based requests in the completion batch handling
block: change request end_io handler to pass back a return value
block: enable batched allocation for blk_mq_alloc_request()
block: kill deprecated BUG_ON() in the flush handling
-----BEGIN PGP SIGNATURE-----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=R05e
-----END PGP SIGNATURE-----
Merge tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull requests via Christoph:
- handle number of queue changes in the TCP and RDMA drivers
(Daniel Wagner)
- allow changing the number of queues in nvmet (Daniel Wagner)
- also consider host_iface when checking ip options (Daniel
Wagner)
- don't map pages which can't come from HIGHMEM (Fabio M. De
Francesco)
- avoid unnecessary flush bios in nvmet (Guixin Liu)
- shrink and better pack the nvme_iod structure (Keith Busch)
- add comment for unaligned "fake" nqn (Linjun Bao)
- print actual source IP address through sysfs "address" attr
(Martin Belanger)
- various cleanups (Jackie Liu, Wolfram Sang, Genjian Zhang)
- handle effects after freeing the request (Keith Busch)
- copy firmware_rev on each init (Keith Busch)
- restrict management ioctls to admin (Keith Busch)
- ensure subsystem reset is single threaded (Keith Busch)
- report the actual number of tagset maps in nvme-pci (Keith
Busch)
- small fabrics authentication fixups (Christoph Hellwig)
- add common code for tagset allocation and freeing (Christoph
Hellwig)
- stop using the request_queue in nvmet (Christoph Hellwig)
- set min_align_mask before calculating max_hw_sectors (Rishabh
Bhatnagar)
- send a rediscover uevent when a persistent discovery controller
reconnects (Sagi Grimberg)
- misc nvmet-tcp fixes (Varun Prakash, zhenwei pi)
- MD pull request via Song:
- Various raid5 fix and clean up, by Logan Gunthorpe and David
Sloan.
- Raid10 performance optimization, by Yu Kuai.
- sbitmap wakeup hang fixes (Hugh, Keith, Jan, Yu)
- IO scheduler switching quisce fix (Keith)
- s390/dasd block driver updates (Stefan)
- support for recovery for the ublk driver (ZiyangZhang)
- rnbd drivers fixes and updates (Guoqing, Santosh, ye, Christoph)
- blk-mq and null_blk map fixes (Bart)
- various bcache fixes (Coly, Jilin, Jules)
- nbd signal hang fix (Shigeru)
- block writeback throttling fix (Yu)
- optimize the passthrough mapping handling (me)
- prepare block cgroups to being gendisk based (Christoph)
- get rid of an old PSI hack in the block layer, moving it to the
callers instead where it belongs (Christoph)
- blk-throttle fixes and cleanups (Yu)
- misc fixes and cleanups (Liu Shixin, Liu Song, Miaohe, Pankaj,
Ping-Xiang, Wolfram, Saurabh, Li Jinlin, Li Lei, Lin, Li zeming,
Miaohe, Bart, Coly, Gaosheng
* tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux: (162 commits)
sbitmap: fix lockup while swapping
block: add rationale for not using blk_mq_plug() when applicable
block: adapt blk_mq_plug() to not plug for writes that require a zone lock
s390/dasd: use blk_mq_alloc_disk
blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep
nvmet: don't look at the request_queue in nvmet_bdev_set_limits
nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all
blk-mq: use quiesced elevator switch when reinitializing queues
block: replace blk_queue_nowait with bdev_nowait
nvme: remove nvme_ctrl_init_connect_q
nvme-loop: use the tagset alloc/free helpers
nvme-loop: store the generic nvme_ctrl in set->driver_data
nvme-loop: initialize sqsize later
nvme-fc: use the tagset alloc/free helpers
nvme-fc: store the generic nvme_ctrl in set->driver_data
nvme-fc: keep ctrl->sqsize in sync with opts->queue_size
nvme-rdma: use the tagset alloc/free helpers
nvme-rdma: store the generic nvme_ctrl in set->driver_data
nvme-tcp: use the tagset alloc/free helpers
nvme-tcp: store the generic nvme_ctrl in set->driver_data
...
-----BEGIN PGP SIGNATURE-----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=m9kX
-----END PGP SIGNATURE-----
Merge tag 'for-6.1/io_uring-2022-10-03' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
- Add supported for more directly managed task_work running.
This is beneficial for real world applications that end up issuing
lots of system calls as part of handling work. Normal task_work will
always execute as we transition in and out of the kernel, even for
"unrelated" system calls. It's more efficient to defer the handling
of io_uring's deferred work until the application wants it to be run,
generally in batches.
As part of ongoing work to write an io_uring network backend for
Thrift, this has been shown to greatly improve performance. (Dylan)
- Add IOPOLL support for passthrough (Kanchan)
- Improvements and fixes to the send zero-copy support (Pavel)
- Partial IO handling fixes (Pavel)
- CQE ordering fixes around CQ ring overflow (Pavel)
- Support sendto() for non-zc as well (Pavel)
- Support sendmsg for zerocopy (Pavel)
- Networking iov_iter fix (Stefan)
- Misc fixes and cleanups (Pavel, me)
* tag 'for-6.1/io_uring-2022-10-03' of git://git.kernel.dk/linux: (56 commits)
io_uring/net: fix notif cqe reordering
io_uring/net: don't update msg_name if not provided
io_uring: don't gate task_work run on TIF_NOTIFY_SIGNAL
io_uring/rw: defer fsnotify calls to task context
io_uring/net: fix fast_iov assignment in io_setup_async_msg()
io_uring/net: fix non-zc send with address
io_uring/net: don't skip notifs for failed requests
io_uring/rw: don't lose short results on io_setup_async_rw()
io_uring/rw: fix unexpected link breakage
io_uring/net: fix cleanup double free free_iov init
io_uring: fix CQE reordering
io_uring/net: fix UAF in io_sendrecv_fail()
selftest/net: adjust io_uring sendzc notif handling
io_uring: ensure local task_work marks task as running
io_uring/net: zerocopy sendmsg
io_uring/net: combine fail handlers
io_uring/net: rename io_sendzc()
io_uring/net: support non-zerocopy sendto
io_uring/net: refactor io_setup_async_addr
io_uring/net: don't lose partial send_zc on fail
...
-----BEGIN PGP SIGNATURE-----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=SZZ1
-----END PGP SIGNATURE-----
Merge tag 'block-6.0-2022-09-29' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"A single NVMe pull request via Christoph with a few fixes that should
go into the 6.0 release:
- Fix IOC_PR_CLEAR and IOC_PR_RELEASE ioctls for nvme devices
(Michael Kelley)
- Disable Write Zeroes on Phison E3C/E4C (Tina Hsu)"
* tag 'block-6.0-2022-09-29' of git://git.kernel.dk/linux:
nvme-pci: disable Write Zeroes on Phison E3C/E4C
nvme: Fix IOC_PR_CLEAR and IOC_PR_RELEASE ioctls for nvme devices
if io_uring sends passthrough command with IORING_URING_CMD_FIXED flag,
use the pre-registered buffer for IO (non-vectored variant). Pass the
buffer/length to io_uring and get the bvec iterator for the range. Next,
pass this bvec to block-layer and obtain a bio/request for subsequent
processing.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20220930062749.152261-13-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a prep patch. Modify nvme_submit_user_cmd and
nvme_map_user_request to take ubuffer as plain integer
argument, and do away with nvme_to_user_ptr conversion in callers.
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220930062749.152261-12-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvme_alloc_request expects a large number of parameters.
Split this out into two functions to reduce number of parameters.
First one retains the name nvme_alloc_request, while second one is
named nvme_map_user_request.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220930062749.152261-8-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass struct request rather than bio. It helps to kill a parameter, and
some processing clean-up too.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220930062749.152261-7-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that the normal passthrough end_io path doesn't need the request
anymore, we can kill the explicit blk_mq_free_request() and just pass
back RQ_END_IO_FREE instead. This enables the batched completion from
freeing batches of requests at the time.
This brings passthrough IO performance at least on par with bdev based
O_DIRECT with io_uring. With this and batche allocations, peak performance
goes from 110M IOPS to 122M IOPS. For IRQ based, passthrough is now also
about 10% faster than previously, going from ~61M to ~67M IOPS.
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Co-developed-by: Stefan Roesch <shr@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
By splitting up the metadata and non-metadata end_io handling, we can
remove any request dependencies on the normal non-metadata IO path. This
is in preparation for enabling the normal IO passthrough path to pass
the ownership of the request back to the block layer.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Co-developed-by: Stefan Roesch <shr@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Everything is just converted to returning RQ_END_IO_NONE, and there
should be no functional changes with this patch.
In preparation for allowing the end_io handler to pass ownership back
to the block layer, rather than retain ownership of the request.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* for-6.1/block: (162 commits)
sbitmap: fix lockup while swapping
block: add rationale for not using blk_mq_plug() when applicable
block: adapt blk_mq_plug() to not plug for writes that require a zone lock
s390/dasd: use blk_mq_alloc_disk
blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep
nvmet: don't look at the request_queue in nvmet_bdev_set_limits
nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all
blk-mq: use quiesced elevator switch when reinitializing queues
block: replace blk_queue_nowait with bdev_nowait
nvme: remove nvme_ctrl_init_connect_q
nvme-loop: use the tagset alloc/free helpers
nvme-loop: store the generic nvme_ctrl in set->driver_data
nvme-loop: initialize sqsize later
nvme-fc: use the tagset alloc/free helpers
nvme-fc: store the generic nvme_ctrl in set->driver_data
nvme-fc: keep ctrl->sqsize in sync with opts->queue_size
nvme-rdma: use the tagset alloc/free helpers
nvme-rdma: store the generic nvme_ctrl in set->driver_data
nvme-tcp: use the tagset alloc/free helpers
nvme-tcp: store the generic nvme_ctrl in set->driver_data
...
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvmet is a consumer of the block layer and should not directly look at
the request_queue. Use the bdev_ helpers to retrieve the device limits
instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
nvmet is a consumer of the block layer and should not directly look at
the request_queue. Just use the NUMA node ID from the gendisk instead of
the request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Use the common helpers to allocate and free the tagsets. To make this
work the generic nvme_ctrl now needs to be stored in the hctx private
data instead of the nvme_loop_ctrl.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Point the private data to the generic controller structure in preparation
of using the common tagset init/exit code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Defer initializing the sqsize field from the options until it has been
capped by MAXCMD.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Use the common helpers to allocate and free the tagsets. To make this
work the generic nvme_ctrl now needs to be stored in the hctx private
data instead of the nvme_fc_ctrl.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Point the private data to the generic controller structure in preparation
of using the common tagset init/exit code and use the chance the cleanup
the init_hctx methods a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Also update the sqsize field when capping the queue size, and remove the
check a queue size that is larger than sqsize given that sqsize is only
initialized from opts->queue_size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Use the common helpers to allocate and free the tagsets. To make this
work the generic nvme_ctrl now needs to be stored in the hctx private
data instead of the nvme_rdma_ctrl.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Point the private data to the generic controller structure in preparation
of using the common tagset init/exit code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Use the common helpers to allocate and free the tagsets. To make this
work the generic nvme_ctrl now needs to be stored in the hctx private
data instead of the nvme_tcp_ctrl.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Point the private data to the generic controller structure in preparation
of using the common tagset init/exit code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
->nvme_tcp_queue is not used anywhere, so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Add common helpers to allocate and tear down the admin and I/O tag sets,
including the special queues allocated with them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
The code to set the result field for the admin and I/O connect commands
is not only verbose and duplicated, but also violates the aliasing
rules as it accesses both the u16 and u32 members in the union.
Add a little helper to sort all that out.
Fixes: db1312dd95 ("nvmet: implement basic In-Band Authentication")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Mark them as unsigned so that we don't need extra casts, and define
them relative to cdword0 instead of requiring extra shifts.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Currently blktests nvme/002 trips up debugobjects if CONFIG_NVME_AUTH is
enabled, but authentication is not on a queue. This is because
nvmet_auth_sq_free cancels sq->auth_expired_work unconditionaly, while
auth_expired_work is only ever initialized if authentication is enabled
for a given controller.
Fix this by calling most of what is nvmet_init_auth unconditionally
when initializing the SQ, and just do the setting of the result
field in the connect command handler.
Fixes: db1312dd95 ("nvmet: implement basic In-Band Authentication")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
There is only a single call-site of nvmet_tcp_finish_cmd(), this
becomes redundant. Remove nvmet_tcp_finish_cmd() and use the original
function body instead.
Suggested-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
ttag is used as an index to get cmd in nvmet_tcp_handle_h2c_data_pdu(),
add a bounds check to avoid out-of-bounds access.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
As per NVMe/TCP transport specification ICReq PDU is the first PDU received
by the controller and controller should receive only one ICReq PDU.
If controller receives more than one ICReq PDU then this can be considered
as fatal error.
nvmet-tcp driver does not check for ICReq PDU opcode if queue state is
NVMET_TCP_Q_LIVE. In LIVE state ICReq PDU is treated as CapsuleCmd PDU,
this can result in abnormal behavior.
Add a check for ICReq PDU in nvmet_tcp_done_recv_pdu() to fix this issue.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We've been reporting 2 maps regardless of whether the module parameter
asked for anything beyond the default queues. A consequence of this
means that blk-mq will reinitialize the all the hardware contexts and io
schedulers on every controller reset when the mapping is exactly the
same as before. This unnecessary overhead is adding several milliseconds
on a reset for environments that don't need it. Report the actual number
of mappings in use.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If swiotlb is force enabled dma_max_mapping_size ends up calling
swiotlb_max_mapping_size which takes into account the min align mask for
the device. Set the min align mask for nvme driver before calling
dma_max_mapping_size while calculating max hw sectors.
Signed-off-by: Rishabh Bhatnagar <risbhat@amazon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When a discovery controller is disconnected, no AENs will arrive to
notify the host about discovery log change events.
In order to solve this, send a uevent notification when a
persistent discovery controller reconnects. We add a new ctrl
flag NVME_CTRL_STARTED_ONCE that will be set on the first
start, and consecutive calls will find it set, and send the
event to userspace if the controller is a discovery controller.
Upon the event reception, userspace will re-read the discovery
log page and will act upon changes as it sees fit.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We expect to grow a few of these flags for various purposes
so make them a proper enumeration.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
E3C/E4C SSDs do support the Write Zeroes command in theory, but have very
bad performance when using it. As the firmware has been frozen for these
products we can not expect firmware improvements for it, so disable
Write Zeroes.
Signed-off-by: Tina Hsu <tina_hsu@phison.corp-partner.google.com>
[hch: update the commit message]
Signed-off-by: Christoph Hellwig <hch@lst.de>
The IOC_PR_CLEAR and IOC_PR_RELEASE ioctls are
non-functional on NVMe devices because the nvme_pr_clear()
and nvme_pr_release() functions set the IEKEY field incorrectly.
The IEKEY field should be set only when the key is zero (i.e,
not specified). The current code does it backwards.
Furthermore, the NVMe spec describes the persistent
reservation "clear" function as an option on the reservation
release command. The current implementation of nvme_pr_clear()
erroneously uses the reservation register command.
Fix these errors. Note that NVMe version 1.3 and later specify
that setting the IEKEY field will return an error of Invalid
Field in Command. The fix will set IEKEY when the key is zero,
which is appropriate as these ioctls consider a zero key to
be "unspecified", and the intention of the spec change is
to require a valid key.
Tested on a version 1.4 PCI NVMe device in an Azure VM.
Fixes: 1673f1f08c ("nvme: move block_device_operations and ns/ctrl freeing to common code")
Fixes: 1d277a637a ("NVMe: Add persistent reservation ops")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The subsystem reset writes to a register, so we have to ensure the
device state is capable of handling that otherwise the driver may access
unmapped registers. Use the state machine to ensure the subsystem reset
doesn't try to write registers on a device already undergoing this type
of reset.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214771
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The passthrough commands already have this restriction, but the other
operations do not. Require the same capabilities for all users as all of
these operations, which include resets and rescans, can be disruptive.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The firmware revision can change on after a reset so copy the most
recent info each time instead of just the first time, otherwise the
sysfs firmware_rev entry may contain stale data.
Reported-by: Jeff Lien <jeff.lien@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If a reset occurs after the scan work attempts to issue a command, the
reset may quisce the admin queue, which blocks the scan work's command
from dispatching. The scan work will not be able to complete while the
queue is quiesced.
Meanwhile, the reset work will cancel all outstanding admin tags and
wait until all requests have transitioned to idle, which includes the
passthrough request. But the passthrough request won't be set to idle
until after the scan_work flushes, so we're deadlocked.
Fix this by handling the end effects after the request has been freed.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216354
Reported-by: Jonathan Derrick <Jonathan.Derrick@solidigm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We need the poll_flags to know how to poll for the IO, and we should
have the batch structure in preparation for supporting batched
completions with iopoll.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Store a cookie during submission, and use that to implement
completion-polling inside the ->uring_cmd_iopoll handler.
This handler makes use of existing bio poll facility.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Link: https://lore.kernel.org/r/20220823161443.49436-5-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
TCP transport relies on the routing table to determine which source
address and interface to use when making a connection. Currently, there
is no way to tell from userspace where a connection was made. This
patch exposes the actual source address using a new field named
"src_addr=" in the "address" attribute.
This is needed to diagnose and identify connectivity issues. With the
source address we can infer the interface associated with each
connection.
This was tested with nvme-cli 2.0 to verify it does not have any
adverse effect. The new "src_addr=" field will simply be displayed in
the output of the "list-subsys" or "list -v" commands as shown here.
$ nvme list-subsys
nvme-subsys0 - NQN=nqn.2014-08.org.nvmexpress.discovery
\
+- nvme0 tcp traddr=192.168.56.1,trsvcid=8009,src_addr=192.168.56.101 live
Signed-off-by: Martin Belanger <martin.belanger@dell.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
kmap() is being deprecated in favor of kmap_local_page().[1]
There are two main problems with kmap(): (1) It comes with an overhead as
mapping space is restricted and protected by a global lock for
synchronization and (2) it also requires global TLB invalidation when the
kmap’s pool wraps and it might block when the mapping space is fully
utilized until a slot becomes available.
The pages which will be mapped are allocated in nvmet_tcp_map_data(),
using the GFP_KERNEL flag. This assures that they cannot come from
HIGHMEM. This imply that a straight page_address() can replace the kmap()
of sg_page(sg) in nvmet_tcp_map_pdu_iovec(). As a side effect, we might
also delete the field "nr_mapped" from struct "nvmet_tcp_cmd" because,
after removing the kmap() calls, there would be no longer any need of it.
In addition, there is no reason to use a kvec for the command receive
data buffers iovec, use a bio_vec instead and let iov_iter handle the
buffer mapping and data copy.
Test with blktests on a QEMU/KVM x86_32 VM, 6GB RAM, booting a kernel with
HIGHMEM64GB enabled.
[1] "[PATCH] checkpatch: Add kmap and kmap_atomic to the deprecated
list" https://lore.kernel.org/all/20220813220034.806698-1-ira.weiny@intel.com/
Cc: Chaitanya Kulkarni <chaitanyak@nvidia.com>
Cc: Keith Busch <kbusch@kernel.org>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
[sagi: added bio_vec plus minor naming changes]
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The 32-bit field, dma_len, packs better in the iod struct above the
dma_addr_t on 64-bit systems.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The largest allowed transfer is 4MB, which can use at most 1025 PRPs.
Each PRP is 8 bytes, so the maximum number of 4k nvme pages needed for
the iod_list is 3, which fits in an 's8' type.
While modifying this field, change the name to "nr_allocations" to
better represent that this is referring to the number of units allocated
from a dma_pool.
Also introduce a BUILD_BUG_ON to ensure we never accidently increase the
largest transfer limit beyond 127 chained prp lists.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
It's only true or false, so make this a bool to reflect that and save
some space in nvme_iod.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We can get the nvme_queue from the req just as easily, so remove the
duplicate path to the same structure to save some space.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
It's perfectly fine to use the same traddr and trsvcid more than once
as long we use different host interface. This is used in setups where
the host has more than one interface but the target exposes only one
traddr/trsvcid combination.
Use the same acceptance rules for host_iface as we have for
host_traddr.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
On reconnect, the number of queues might have changed.
In the case where we have more queues available than previously we try
to access queues which are not initialized yet.
The other case where we have less queues than previously, the
connection attempt will fail because the target doesn't support the
old number of queues and we end up in a reconnect loop.
Thus, only start queues which are currently present in the tagset
limited by the number of available queues. Then we update the tagset
and we can start any new queue.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
On reconnect, the number of queues might have changed.
In the case where we have more queues available than previously we try
to access queues which are not initialized yet.
The other case where we have less queues than previously, the
connection attempt will fail because the target doesn't support the
old number of queues and we end up in a reconnect loop.
Thus, only start queues which are currently present in the tagset
limited by the number of available queues. Then we update the tagset
and we can start any new queue.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Allow to set the max queues the target supports. This is useful for
testing the reconnect attempt of the host with changing numbers of
supported queues.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
For no volatile write cache block device backend, sending flush bio is
unnecessary, avoid to do that.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The parameter is not used in this function, so remove it.
Signed-off-by: Genjian Zhang <zhanggenjian@kylinos.cn>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Jump directly to done_kfree to release d, which is consistent with the
code style behind.
Reported-by: Genjian Zhang <zhanggenjian@kylinos.cn>
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
req->cqe->result.u16 has already been assigned in the previous line, no
need to do it again.
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Current "fake" nqn field is "nqn.2014.08.org.nvmexpress:", it is
not aligned with the canonical version for history reasons.
Signed-off-by: Linjun Bao <meljbao@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----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=3RZd
-----END PGP SIGNATURE-----
Merge tag 'block-6.0-2022-09-09' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull via Christoph:
- fix a use after free in nvmet (Bart Van Assche)
- fix a use after free when detecting digest errors
(Sagi Grimberg)
- fix regression that causes sporadic TCP requests to time out
(Sagi Grimberg)
- fix two off by ones errors in the nvmet ZNS support
(Dennis Maisenbacher)
- requeue aen after firmware activation (Keith Busch)
- Fix missing request flags in debugfs code (me)
- Partition scan fix (Ming)
* tag 'block-6.0-2022-09-09' of git://git.kernel.dk/linux-block:
block: add missing request flags to debugfs code
nvme: requeue aen after firmware activation
nvmet: fix mar and mor off-by-one errors
nvme-tcp: fix regression that causes sporadic requests to time out
nvme-tcp: fix UAF when detecting digest errors
nvmet: fix a use-after-free
block: don't add partitions if GD_SUPPRESS_PART_SCAN is set
The driver prevents async event work while handling a processing paused
event, but someone needs to restart it after the controller returns to a
live state.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216400
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Maximum Active Resources (MAR) and Maximum Open Resources (MOR) are 0's
based vales where a value of 0xffffffff indicates that there is no limit.
Decrement the values that are returned by bdev_max_open_zones and
bdev_max_active_zones as the block layer helpers are not 0's based.
A 0 returned by the block layer helpers indicates no limit, thus convert
it to 0xffffffff (U32_MAX).
Fixes: aaf2e048af ("nvmet: add ZBD over ZNS backend support")
Suggested-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When we queue requests, we strive to batch as much as possible and also
signal the network stack that more data is about to be sent over a socket
with MSG_SENDPAGE_NOTLAST. This flag looks at the pending requests queued
as well as queue->more_requests that is derived from the block layer
last-in-batch indication.
We set more_request=true when we flush the request directly from
.queue_rq submission context (in nvme_tcp_send_all), however this is
wrongly assuming that no other requests may be queued during the
execution of nvme_tcp_send_all.
Due to this, a race condition may happen where:
1. request X is queued as !last-in-batch
2. request X submission context calls nvme_tcp_send_all directly
3. nvme_tcp_send_all is preempted and schedules to a different cpu
4. request Y is queued as last-in-batch
5. nvme_tcp_send_all context sends request X+Y, however signals for
both MSG_SENDPAGE_NOTLAST because queue->more_requests=true.
==> none of the requests is pushed down to the wire as the network
stack is waiting for more data, both requests timeout.
To fix this, we eliminate queue->more_requests and only rely on
the queue req_list and send_list to be not-empty.
Fixes: 122e5b9f3d ("nvme-tcp: optimize network stack with setting msg flags according to batch size")
Reported-by: Jonathan Nicklin <jnicklin@blockbridge.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Jonathan Nicklin <jnicklin@blockbridge.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We should also bail from the io_work loop when we set rd_enabled to true,
so we don't attempt to read data from the socket when the TCP stream is
already out-of-sync or corrupted.
Fixes: 3f2304f8c6 ("nvme-tcp: add NVMe over TCP host driver")
Reported-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
TCP_FIN_WAIT2 and TCP_LAST_ACK were not handled, the connection is closing
so we can ignore them and avoid printing the "unhandled state"
warning message.
[ 1298.852386] nvmet_tcp: queue 2 unhandled state 5
[ 1298.879112] nvmet_tcp: queue 7 unhandled state 5
[ 1298.884253] nvmet_tcp: queue 8 unhandled state 5
[ 1298.889475] nvmet_tcp: queue 9 unhandled state 5
v2: Do not call nvmet_tcp_schedule_release_queue(), just ignore
the fin_wait2 and last_ack states.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
There's a goto missing in nvmet_setup_auth(), causing a kernel oops
when nvme_auth_extract_key() fails.
Reported-by: Tal Lossos <tallossos@gmail.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Lexar NM610 reports bogus eui64 values that appear to be the same across
all drives. Quirk them out so they are not marked as "non globally unique"
duplicates.
Signed-off-by: Shyamin Ayesh <me@shyamin.com>
[patch formatting]
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Since blk_mq_map_queues() and the .map_queues() callbacks always return 0,
change their return type into void. Most callers ignore the returned value
anyway.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Doug Gilbert <dgilbert@interlog.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Acked-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20220815170043.19489-3-bvanassche@acm.org
[axboe: fold in fix from Bart]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=1/w+
-----END PGP SIGNATURE-----
Merge tag 'block-6.0-2022-08-12' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request
- print nvme connect Linux error codes properly (Amit Engel)
- fix the fc_appid_store return value (Christoph Hellwig)
- fix a typo in an error message (Christophe JAILLET)
- add another non-unique identifier quirk (Dennis P. Kliem)
- check if the queue is allocated before stopping it in nvme-tcp
(Maurizio Lombardi)
- restart admin queue if the caller needs to restart queue in
nvme-fc (Ming Lei)
- use kmemdup instead of kmalloc + memcpy in nvme-auth (Zhang
Xiaoxu)
- __alloc_disk_node() error handling fix (Rafael)
* tag 'block-6.0-2022-08-12' of git://git.kernel.dk/linux-block:
block: Do not call blk_put_queue() if gendisk allocation fails
nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG GAMMIX S70
nvme-tcp: check if the queue is allocated before stopping it
nvme-fabrics: Fix a typo in an error message
nvme-fabrics: parse nvme connect Linux error codes
nvmet-auth: use kmemdup instead of kmalloc + memcpy
nvme-fc: fix the fc_appid_store return value
nvme-fc: restart admin queue if the caller needs to restart queue
ADATA XPG GAMMIX S70 reports bogus eui64 values that appear to be the same
across all drives. Quirk them out so they are not marked as "non globally
unique" duplicates.
Signed-off-by: Dennis P. Kliem <dpkliem@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When an error is detected and the host reconnects, the
nvme_tcp_error_recovery_work() function is called and starts
tearing down the io queues and de-allocating them;
If at the same time the "nvme" process deletes the controller via sysfs,
the nvme_tcp_delete_ctrl() gets called and waits until the
nvme_tcp_error_recovery_work() finishes its job; then starts
tearing down the io queues, but at this point they have already
been freed and the mutexes are destroyed.
Calling mutex_lock() against a destroyed mutex triggers a warning:
[ 1299.025575] nvme nvme1: Reconnecting in 10 seconds...
[ 1299.636449] nvme nvme1: Removing ctrl: NQN "blktests-subsystem-1"
[ 1299.645262] ------------[ cut here ]------------
[ 1299.649949] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[ 1299.649971] WARNING: CPU: 4 PID: 104150 at kernel/locking/mutex.c:579 __mutex_lock+0x2d0/0x7dc
[ 1299.717934] CPU: 4 PID: 104150 Comm: nvme
[ 1299.828075] Call trace:
[ 1299.830526] __mutex_lock+0x2d0/0x7dc
[ 1299.834203] mutex_lock_nested+0x64/0xd4
[ 1299.838139] nvme_tcp_stop_queue+0x54/0xe0 [nvme_tcp]
[ 1299.843211] nvme_tcp_teardown_io_queues.part.0+0x90/0x280 [nvme_tcp]
[ 1299.849672] nvme_tcp_delete_ctrl+0x6c/0xf0 [nvme_tcp]
[ 1299.854831] nvme_do_delete_ctrl+0x108/0x120 [nvme_core]
[ 1299.860181] nvme_sysfs_delete+0xec/0xf0 [nvme_core]
[ 1299.865179] dev_attr_store+0x40/0x70
Fix the warning by checking if the queues are allocated
in the nvme_tcp_stop_queue(). If they are not, it makes no
sense to try to stop them.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This fixes the assumption that errval is an unsigned nvme error
Signed-off-by: Amit Engel <amit.engel@dell.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
For code neat purpose, we can use kmemdup to replace
kmalloc + memcpy.
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
"nvme-fc: fold t fc_update_appid into fc_appid_store" accidentally
changed the userspace interface for the appid attribute, because the code
that decrements "count" to remove a trailing '\n' in the parsing results
in the decremented value being incorrectly be returned from the sysfs
write. Fix this by keeping an orig_count variable for the full length
of the write.
Fixes: c814153c83 ("nvme-fc: fold t fc_update_appid into fc_appid_store")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Tested-by: Muneendra Kumar M <muneendra.kumar@broadcom.com>
Without restarting admin queue in __nvme_fc_abort_outstanding_ios(),
it leaves controller not capable of handling admin pt request, and
causes io hang.
Fixes it by restarting admin queue if the caller of __nvme_fc_abort_outstanding_ios
requires to restart queue.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Tested-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
- convert arm32 to the common dma-direct code (Arnd Bergmann, Robin Murphy,
Christoph Hellwig)
- restructure the PCIe peer to peer mapping support (Logan Gunthorpe)
- allow the IOMMU code to communicate an optional DMA mapping length
and use that in scsi and libata (John Garry)
- split the global swiotlb lock (Tianyu Lan)
- various fixes and cleanup (Chao Gao, Dan Carpenter, Dongli Zhang,
Lukas Bulwahn, Robin Murphy)
-----BEGIN PGP SIGNATURE-----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=Bv19
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.20-2022-08-06' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- convert arm32 to the common dma-direct code (Arnd Bergmann, Robin
Murphy, Christoph Hellwig)
- restructure the PCIe peer to peer mapping support (Logan Gunthorpe)
- allow the IOMMU code to communicate an optional DMA mapping length
and use that in scsi and libata (John Garry)
- split the global swiotlb lock (Tianyu Lan)
- various fixes and cleanup (Chao Gao, Dan Carpenter, Dongli Zhang,
Lukas Bulwahn, Robin Murphy)
* tag 'dma-mapping-5.20-2022-08-06' of git://git.infradead.org/users/hch/dma-mapping: (45 commits)
swiotlb: fix passing local variable to debugfs_create_ulong()
dma-mapping: reformat comment to suppress htmldoc warning
PCI/P2PDMA: Remove pci_p2pdma_[un]map_sg()
RDMA/rw: drop pci_p2pdma_[un]map_sg()
RDMA/core: introduce ib_dma_pci_p2p_dma_supported()
nvme-pci: convert to using dma_map_sgtable()
nvme-pci: check DMA ops when indicating support for PCI P2PDMA
iommu/dma: support PCI P2PDMA pages in dma-iommu map_sg
iommu: Explicitly skip bus address marked segments in __iommu_map_sg()
dma-mapping: add flags to dma_map_ops to indicate PCI P2PDMA support
dma-direct: support PCI P2PDMA pages in dma-direct map_sg
dma-mapping: allow EREMOTEIO return code for P2PDMA transfers
PCI/P2PDMA: Introduce helpers for dma_map_sg implementations
PCI/P2PDMA: Attempt to set map_type if it has not been set
lib/scatterlist: add flag for indicating P2PDMA segments in an SGL
swiotlb: clean up some coding style and minor issues
dma-mapping: update comment after dmabounce removal
scsi: sd: Add a comment about limiting max_sectors to shost optimal limit
ata: libata-scsi: cap ata_device->max_sectors according to shost->max_sectors
scsi: scsi_transport_sas: cap shost opt_sectors according to DMA optimal limit
...
-----BEGIN PGP SIGNATURE-----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=pgNf
-----END PGP SIGNATURE-----
Merge tag 'for-5.20/block-2022-08-04' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- NVMe pull requests via Christoph:
- add support for In-Band authentication (Hannes Reinecke)
- handle the persistent internal error AER (Michael Kelley)
- use in-capsule data for TCP I/O queue connect (Caleb Sander)
- remove timeout for getting RDMA-CM established event (Israel
Rukshin)
- misc cleanups (Joel Granados, Sagi Grimberg, Chaitanya Kulkarni,
Guixin Liu, Xiang wangx)
- use command_id instead of req->tag in trace_nvme_complete_rq()
(Bean Huo)
- various fixes for the new authentication code (Lukas Bulwahn,
Dan Carpenter, Colin Ian King, Chaitanya Kulkarni, Hannes
Reinecke)
- small cleanups (Liu Song, Christoph Hellwig)
- restore compat_ioctl support (Nick Bowler)
- make a nvmet-tcp workqueue lockdep-safe (Sagi Grimberg)
- enable generic interface (/dev/ngXnY) for unknown command sets
(Joel Granados, Christoph Hellwig)
- don't always build constants.o (Christoph Hellwig)
- print the command name of aborted commands (Christoph Hellwig)
- MD pull requests via Song:
- Improve raid5 lock contention, by Logan Gunthorpe.
- Misc fixes to raid5, by Logan Gunthorpe.
- Fix race condition with md_reap_sync_thread(), by Guoqing Jiang.
- Fix potential deadlock with raid5_quiesce and
raid5_get_active_stripe, by Logan Gunthorpe.
- Refactoring md_alloc(), by Christoph"
- Fix md disk_name lifetime problems, by Christoph Hellwig
- Convert prepare_to_wait() to wait_woken() api, by Logan
Gunthorpe;
- Fix sectors_to_do bitmap issue, by Logan Gunthorpe.
- Work on unifying the null_blk module parameters and configfs API
(Vincent)
- drbd bitmap IO error fix (Lars)
- Set of rnbd fixes (Guoqing, Md Haris)
- Remove experimental marker on bcache async device registration (Coly)
- Series from cleaning up the bio splitting (Christoph)
- Removal of the sx8 block driver. This hardware never really
widespread, and it didn't receive a lot of attention after the
initial merge of it back in 2005 (Christoph)
- A few fixes for s390 dasd (Eric, Jiang)
- Followup set of fixes for ublk (Ming)
- Support for UBLK_IO_NEED_GET_DATA for ublk (ZiyangZhang)
- Fixes for the dio dma alignment (Keith)
- Misc fixes and cleanups (Ming, Yu, Dan, Christophe
* tag 'for-5.20/block-2022-08-04' of git://git.kernel.dk/linux-block: (136 commits)
s390/dasd: Establish DMA alignment
s390/dasd: drop unexpected word 'for' in comments
ublk_drv: add support for UBLK_IO_NEED_GET_DATA
ublk_cmd.h: add one new ublk command: UBLK_IO_NEED_GET_DATA
ublk_drv: cleanup ublksrv_ctrl_dev_info
ublk_drv: add SET_PARAMS/GET_PARAMS control command
ublk_drv: fix ublk device leak in case that add_disk fails
ublk_drv: cancel device even though disk isn't up
block: fix leaking page ref on truncated direct io
block: ensure bio_iov_add_page can't fail
block: ensure iov_iter advances for added pages
drivers:md:fix a potential use-after-free bug
md/raid5: Ensure batch_last is released before sleeping for quiesce
md/raid5: Move stripe_request_ctx up
md/raid5: Drop unnecessary call to r5c_check_stripe_cache_usage()
md/raid5: Make is_inactive_blocked() helper
md/raid5: Refactor raid5_get_active_stripe()
block: pass struct queue_limits to the bio splitting helpers
block: move bio_allowed_max_sectors to blk-merge.c
block: move the call to get_max_io_size out of blk_bio_segment_split
...
One of the goals is to reduce the overhead of using ->read_iter()
and ->write_iter() instead of ->read()/->write(); new_sync_{read,write}()
has a surprising amount of overhead, in particular inside iocb_flags().
That's why the beginning of the series is in this pile; it's not directly
iov_iter-related, but it's a part of the same work...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCYurGOQAKCRBZ7Krx/gZQ
6ysyAP91lvBfMRepcxpd9kvtuzWkU8A3rfSziZZteEHANB9Q7QEAiPn2a2OjWkcZ
uAyUWfCkHCNx+dSMkEvUgR5okQ0exAM=
=9UCV
-----END PGP SIGNATURE-----
Merge tag 'pull-work.iov_iter-base' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs iov_iter updates from Al Viro:
"Part 1 - isolated cleanups and optimizations.
One of the goals is to reduce the overhead of using ->read_iter() and
->write_iter() instead of ->read()/->write().
new_sync_{read,write}() has a surprising amount of overhead, in
particular inside iocb_flags(). That's the explanation for the
beginning of the series is in this pile; it's not directly
iov_iter-related, but it's a part of the same work..."
* tag 'pull-work.iov_iter-base' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
first_iovec_segment(): just return address
iov_iter: massage calling conventions for first_{iovec,bvec}_segment()
iov_iter: first_{iovec,bvec}_segment() - simplify a bit
iov_iter: lift dealing with maxpages out of first_{iovec,bvec}_segment()
iov_iter_get_pages{,_alloc}(): cap the maxsize with MAX_RW_COUNT
iov_iter_bvec_advance(): don't bother with bvec_iter
copy_page_{to,from}_iter(): switch iovec variants to generic
keep iocb_flags() result cached in struct file
iocb: delay evaluation of IS_SYNC(...) until we want to check IOCB_DSYNC
struct file: use anonymous union member for rcuhead and llist
btrfs: use IOMAP_DIO_NOSYNC
teach iomap_dio_rw() to suppress dsync
No need of likely/unlikely on calls of check_copy_size()
The double indirect bio leads to somewhat suboptimal code generation.
Instead return the (original or split) bio, and make sure the
request_queue arguments to the lower level helpers is passed after the
bio to avoid constant reshuffling of the argument passing registers.
Also give it and the helpers used to implement it more descriptive names.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220727162300.3089193-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We probably need nvmet_tcp_wq to have MEM_RECLAIM as we are
sending/receiving for the socket from works on this workqueue.
Also this eliminates lockdep complaints:
--
[ 6174.010200] workqueue: WQ_MEM_RECLAIM
nvmet-wq:nvmet_tcp_release_queue_work [nvmet_tcp] is flushing
!WQ_MEM_RECLAIM nvmet_tcp_wq:nvmet_tcp_io_work [nvmet_tcp]
[ 6174.010216] WARNING: CPU: 20 PID: 14456 at kernel/workqueue.c:2628
check_flush_dependency+0x110/0x14c
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Extend nvme_alloc_ns() and nvme_validate_ns() for unknown command-set as
well. Both are made to use a new helper (nvme_update_ns_info_cs_indep)
which is similar to nvme_update_ns_info but performs fewer operations
to get the generic interface up.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
[hch: rebased on other refactoring patches]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a little helper to check if a namespace should be marked read-only
that uses a new is_readonly flag in the nvme_ns_info structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Joel Granados <j.granados@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Change nvme_ns_scan to gather all information needed for generic
namespace setup into a nvme_ns_info structure. This structure is filled
from the Command Set Idependent Identify Namespace data structure if
it is available or else the legacy Identify namespace structure.
With that everything related to the NVM command set (and the ZNS command
set derived from it) can be encapsulated in the nvme_update_ns_info_block
function while keeping the rest of the namespace probing generic.
The downside is that we now always issue two Identify Namespace calls for
each probed namespace instead of usually just a single one previously.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Joel Granados <j.granados@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Check for multiple command set support early on an error out if is
not supported when a !NVM command set namespace is found. This
prepares for adding command set independent passthrough support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Joel Granados <j.granados@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This shorter name much better fits what this function does in
the scanning process.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Joel Granados <j.granados@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvme_revalidate_zones can also return -ENODEV if e.g. zone sizes aren't
constant or not a power of two. In that case we should jump to marking
the gendisk hidden and only support pass through.
Fixes: 602e57c979 ("nvme: also mark passthrough-only namespaces ready in nvme_update_ns_info")
Reported-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Joel Granados <j.granados@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 71ebe3842ebe ("nvmet-auth: Diffie-Hellman key exchange support")
intends to select 'Support for RFC 7919 FFDHE group parameters' for using
FFDHE groups for NVMe In-Band Authentication.
It however selects CRYPTO_DH_GROUPS_RFC7919, instead of the intended
CRYPTO_DH_RFC7919_GROUPS; notice the swapping of words here.
Correct the select to the intended config option.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvmet_auth_challenge() return type is int and currently it uses status
variable that is of type u16 in nvmet_execute_auth_receive().
Catch the return value of nvmet_auth_challenge() into int and set the
NVME_SC_INTERNAL as status variable before we jump to error.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvmet_setup_auth() return type is int and currently it uses status
variable that is of type u16 in nvmet_execute_auth_send().
Catch the return value of nvmet_setup_auth() into int and set the
NVME_SC_INTERNAL as status variable before we jump to error.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are a couple of spelling mistakes in pr_warn and pr_debug messages.
Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
dh_keysize is a size_t, use the proper format specifier for printing it.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@sues.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
And add an empty line after the variable declaration.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Casting function pointers breaks control flow enforcement and is
generally a horrible coding style.
Add two wrappers to get rid of these casts.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split nvme_tcp_alloc_tagset into one helper for the admin tag_set and
one for the I/O tag set.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split nvme_rdma_alloc_tagset into one helper for the admin tag_set and
one for the I/O tag set.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split nvme_dev_add into a helper to actually allocate the tag set, and
one that just update the number of queues. Add a local variable for
the tag_set to clean up the code a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split nvme_alloc_admin_tags into a helper to actually allocate the
tag set, and one that just restarts the admin queue. Add a local
variable for the tag_set to clean up the code a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To allow for slightly better debugging, print the command name when
aborting an command.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If prp_list is NULL, nvme_unmap_sg will be performed, and the assignment
to first_dma is meaningless, so remove it.
Signed-off-by: Liu Song <liusong@linux.alibaba.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A couple of the early error gotos call kfree_sensitive(transformed_key);
before "transformed_key" has been initialized.
Fixes: db1312dd95 ("nvmet: implement basic In-Band Authentication")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The > ARRAY_SIZE() checks need to be >= ARRAY_SIZE() to prevent reading
one element beyond the end of the arrays.
Fixes: db1312dd95 ("nvmet: implement basic In-Band Authentication")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 89b3d6e605 ("nvme: simplify the compat ioctl handling") removed
the initialization of compat_ioctl from the nvme block_device_operations
structures.
Presumably the expectation was that 32-bit ioctls would be directed
through the regular handler but this is not the case: failing to assign
.compat_ioctl actually means that the compat case is disabled entirely,
and any attempt to submit nvme ioctls from 32-bit userspace fails
outright with -ENOTTY.
For example:
% smartctl -x /dev/nvme0n1
[...]
Read NVMe Identify Controller failed: NVME_IOCTL_ADMIN_CMD: Inappropriate ioctl for device
The blkdev_compat_ptr_ioctl helper can be used to direct compat calls
through the main ioctl handler and makes things work again.
Fixes: 89b3d6e605 ("nvme: simplify the compat ioctl handling")
Signed-off-by: Nick Bowler <nbowler@draconx.ca>
Reviewed-by: Guixin Liu <kanie@linux.alibaba.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The entire content of constants.c if guarded by an ifdef, so switch to
just building the file conditionally instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use command_id instead of req->tag in trace_nvme_complete_rq(),
because of commit e7006de6c2 ("nvme: code command_id with a genctr
for use authentication after release"), cmd->common.command_id is set to
((genctl & 0xf)< 12 | req->tag), no longer req->tag, which makes cid in
trace_nvme_complete_rq and trace_nvme_setup_cmd are not the same.
Fixes: e7006de6c2 ("nvme: code command_id with a genctr for use authentication after release")
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass anagrpid as second argument. This is prep patch that allows reusing
this function for supporting unknown command sets.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use nvme core helper nvme_cancel_tagset and nvme_cancel_admin_tagset
instead of same logic code.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Ruozhu Li <liruozhu@huawei.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use nvme core helper nvme_cancel_tagset and nvme_cancel_admin_tagset
instead of same logic code.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Ruozhu Li <liruozhu@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, command data is only sent in-capsule on the for admin or I/O
commands on queues that indicate support for it. Send fabrics command
data in-capsule for I/O queues as well to avoid needing a separate
H2CData PDU for the connect command.
This is optimization. Without this change, we send the connect command
capsule and data in separate PDUs (CapsuleCmd and H2CData), and must wait
for the controller to respond with an R2T PDU before sending the H2CData.
With the change, we send a single CapsuleCmd PDU that includes the data.
This reduces the number of bytes (and likely packets) sent across the network,
and simplifies the send state machine handling in the driver.
Signed-off-by: Caleb Sander <csander@purestorage.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In case many controllers start error recovery at the same time (i.e.,
when port is down and up), they may never succeed to reconnect again.
This is because the target can't handle all the connect requests at
three seconds (the arbitrary value set today). Even if some of the
connections are established, when a single queue fails to connect,
all the controller's queues are destroyed as well. So, on the
following reconnection attempts the number of connect requests may
remain the same. To fix this, remove the timeout and wait for RDMA-CM
event to abort/complete the connect request. RDMA-CM sends unreachable
event when a timeout of ~90 seconds is expired. This approach is used
at other RDMA-CM users like SRP and iSER at blocking mode. The commit
also renames NVME_RDMA_CONNECT_TIMEOUT_MS to NVME_RDMA_CM_TIMEOUT_MS.
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Each authentication step is required to be completed within the
KATO interval (or two minutes if not set). So add a workqueue function
to reset the transaction ID and the expected next protocol step;
this will automatically the next authentication command referring
to the terminated authentication.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Implement Diffie-Hellman key exchange using FFDHE groups for NVMe
In-Band Authentication.
This patch adds a new host configfs attribute 'dhchap_dhgroup' to
select the FFDHE group to use.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Implement NVMe-oF In-Band authentication according to NVMe TPAR 8006.
This patch adds three additional configfs entries 'dhchap_key',
'dhchap_ctrl_key', and 'dhchap_hash' to the 'host' configfs directory.
The 'dhchap_key' and 'dhchap_ctrl_key' entries need to be in the ASCII
format as specified in NVMe Base Specification v2.0 section 8.13.5.8
'Secret representation'.
'dhchap_hash' defaults to 'hmac(sha256)', and can be written to to
switch to a different HMAC algorithm.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some fabrics commands can be sent via io queues, so add a new
function nvmet_parse_fabrics_io_cmd() and rename the existing
nvmet_parse_fabrics_cmd() to nvmet_parse_fabrics_admin_cmd().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Implement NVMe-oF In-Band authentication according to NVMe TPAR 8006.
This patch adds two new fabric options 'dhchap_secret' to specify the
pre-shared key (in ASCII respresentation according to NVMe 2.0 section
8.13.5.8 'Secret representation') and 'dhchap_ctrl_secret' to specify
the pre-shared controller key for bi-directional authentication of both
the host and the controller.
Re-authentication can be triggered by writing the PSK into the new
controller sysfs attribute 'dhchap_secret' or 'dhchap_ctrl_secret'.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
[axboe: fold in clang build fix]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The 'connect' command might fail with NVME_SC_AUTH_REQUIRED, so we
should be decoding this error, too.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A helper now exist, no need to open-code the same functionality.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Only caller of the __nvme_submit_sync_cmd() with qid value not equal to
NVME_QID_ANY is nvmf_connect_io_queues(), where qid value is alway set
to > 0.
[1] __nvme_submit_sync_cmd() callers with qid parameter from :-
Caller | qid parameter
------------------------------------------------------
* nvme_fc_connect_io_queues() |
nvmf_connect_io_queue() | qid > 0
* nvme_rdma_start_io_queues() |
nvme_rdma_start_queue() |
nvmf_connect_io_queues() | qid > 0
* nvme_tcp_start_io_queues() |
nvme_tcp_start_queue() |
nvmf_connect_io_queues() | qid > 0
* nvme_loop_connect_io_queues() |
nvmf_connect_io_queues() | qid > 0
When qid value of the function parameter __nvme_submit_sync_cmd() is > 0
from above callers, we use blk_mq_alloc_request_hctx(), where we pass
last parameter as 0 if qid functional parameter value is set to 0 with
conditional operators, see 1002 :-
991 int __nvme_submit_sync_cmd(struct request_queue *q, struct nvme_command *cmd,
992 union nvme_result *result, void *buffer, unsigned bufflen,
993 int qid, int at_head, blk_mq_req_flags_t flags)
994 {
995 struct request *req;
996 int ret;
997
998 if (qid == NVME_QID_ANY)
999 req = blk_mq_alloc_request(q, nvme_req_op(cmd), flags);
1000 else
1001 req = blk_mq_alloc_request_hctx(q, nvme_req_op(cmd), flags,
1002 qid ? qid - 1 : 0);
1003
But qid function parameter value of the __nvme_submit_sync_cmd() will
never be 0 from above caller list see [1], and all the other callers of
__nvme_submit_sync_cmd() use NVME_QID_ANY as qid value :-
1. nvme_submit_sync_cmd()
2. nvme_features()
3. nvme_sec_submit()
4. nvmf_reg_read32()
5. nvmf_reg_read64()
6. nvmf_ref_write32()
7. nvmf_connect_admin_queue()
Remove the conditional operator to pass the qid as 0 in the call to
blk_mq_alloc_requst_hctx().
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The function __nvme_submit_sync_cmd() has following list of callers
that sets the timeout value to 0 :-
Callers | Timeout value
------------------------------------------------
nvme_submit_sync_cmd() | 0
nvme_features() | 0
nvme_sec_submit() | 0
nvmf_reg_read32() | 0
nvmf_reg_read64() | 0
nvmf_reg_write32() | 0
nvmf_connect_admin_queue() | 0
nvmf_connect_io_queue() | 0
Remove the timeout function parameter from __nvme_submit_sync_cmd() and
adjust the rest of code accordingly.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In the NVM Express Revision 1.4 spec, Figure 145 describes possible
values for an AER with event type "Error" (value 000b). For a
Persistent Internal Error (value 03h), the host should perform a
controller reset.
Add support for this error using code that already exists for
doing a controller reset. As part of this support, introduce
two utility functions for parsing the AER type and subtype.
This new support was tested in a lab environment where we can
generate the persistent internal error on demand, and observe
both the Linux side and NVMe controller side to see that the
controller reset has been done.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=celk
-----END PGP SIGNATURE-----
Merge tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Improve the type checking of request flags (Bart)
- Ensure queue mapping for a single queues always picks the right queue
(Bart)
- Sanitize the io priority handling (Jan)
- rq-qos race fix (Jinke)
- Reserved tags handling improvements (John)
- Separate memory alignment from file/disk offset aligment for O_DIRECT
(Keith)
- Add new ublk driver, userspace block driver using io_uring for
communication with the userspace backend (Ming)
- Use try_cmpxchg() to cleanup the code in various spots (Uros)
- Finally remove bdevname() (Christoph)
- Clean up the zoned device handling (Christoph)
- Clean up independent access range support (Christoph)
- Clean up and improve block sysfs handling (Christoph)
- Clean up and improve teardown of block devices.
This turns the usual two step process into something that is simpler
to implement and handle in block drivers (Christoph)
- Clean up chunk size handling (Christoph)
- Misc cleanups and fixes (Bart, Bo, Dan, GuoYong, Jason, Keith, Liu,
Ming, Sebastian, Yang, Ying)
* tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block: (178 commits)
ublk_drv: fix double shift bug
ublk_drv: make sure that correct flags(features) returned to userspace
ublk_drv: fix error handling of ublk_add_dev
ublk_drv: fix lockdep warning
block: remove __blk_get_queue
block: call blk_mq_exit_queue from disk_release for never added disks
blk-mq: fix error handling in __blk_mq_alloc_disk
ublk: defer disk allocation
ublk: rewrite ublk_ctrl_get_queue_affinity to not rely on hctx->cpumask
ublk: fold __ublk_create_dev into ublk_ctrl_add_dev
ublk: cleanup ublk_ctrl_uring_cmd
ublk: simplify ublk_ch_open and ublk_ch_release
ublk: remove the empty open and release block device operations
ublk: remove UBLK_IO_F_PREFLUSH
ublk: add a MAINTAINERS entry
block: don't allow the same type rq_qos add more than once
mmc: fix disk/queue leak in case of adding disk failure
ublk_drv: fix an IS_ERR() vs NULL check
ublk: remove UBLK_IO_F_INTEGRITY
ublk_drv: remove unneeded semicolon
...
Introduce the helper function ib_dma_pci_p2p_dma_supported() to check
if a given ib_device can be used in P2PDMA transfers. This ensures
the ib_device is not using virt_dma and also that the underlying
dma_device supports P2PDMA.
Use the new helper in nvme-rdma to replace the existing check for
ib_uses_virt_dma(). Adding the dma_pci_p2pdma_supported() check allows
switching away from pci_p2pdma_[un]map_sg().
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The dma_map operations now support P2PDMA pages directly. So remove
the calls to pci_p2pdma_[un]map_sg_attrs() and replace them with calls
to dma_map_sgtable().
dma_map_sgtable() returns more complete error codes than dma_map_sg()
and allows differentiating EREMOTEIO errors in case an unsupported
P2PDMA transfer is requested. When this happens, return BLK_STS_TARGET
so the request isn't retried.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Introduce a supports_pci_p2pdma() operation in nvme_ctrl_ops to
replace the fixed NVME_F_PCI_P2PDMA flag such that the dma_map_ops
flags can be checked for PCI P2PDMA support.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Improve static type checking by using the new blk_opf_t type for variables
that represent a request operation combined with request flags. Rename
those variables from 'op' into 'opf'.
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-39-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improve static type checking by using the enum req_op type for variables
that represent a request operation and the new blk_opf_t type for
variables that represent request flags.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Keith Busch <kbusch@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-38-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The type name enum req_opf is misleading since it suggests that values of
this type include both an operation type and flags. Since values of this
type represent an operation only, change the type name into enum req_op.
Convert the enum req_op documentation into kernel-doc format. Move a few
definitions such that the enum req_op documentation occurs just above
the enum req_op definition.
The name "req_opf" was introduced by commit ef295ecf09 ("block: better op
and flags encoding").
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-2-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The issue exists when multipath is enabled and the namespace is
shared, but all the other controller checks at nvme_is_unique_nsid()
are false. The reason for this issue is that nvme_is_unique_nsid()
returns false when is called from nvme_mpath_alloc_disk() due to an
uninitialized value of head->shared. The patch fixes it by setting
head->shared before nvme_mpath_alloc_disk() is called.
Fixes: 5974ea7ce0 ("nvme: allow duplicate NSIDs for private namespaces")
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
A reset on a live device experiencing a link error still needs to have
the queue freeze state started for the subsequent reinitialization. Skip
only the register read if the device is not present instead of bypassing
the freeze checks.
Fixes: b98235d3a4 ("nvme-pci: harden drive presence detect in nvme_dev_disable()")
Reported-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This will allow the trace event to know the full size of the data
intended to be copied and silence read overflow checks.
Reported-by: John Garry <john.garry@huawei.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Move the zone related fields that are currently stored in
struct request_queue to struct gendisk as these are part of the highlevel
block layer API and are only used for non-passthrough I/O that requires
the gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the bdev based helpers instead of the queue based ones to clean up
the code a bit and prepare for storing all zone related fields in
struct gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass a block_device instead of a request_queue as that is what most
callers have at hand.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Switch to a gendisk based API in preparation for moving all zone related
fields from the request_queue to the gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Prepare for storing the zone related field in struct gendisk instead
of struct request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We no longer use the 'reserved' arg in busy_tag_iter_fn for any iter
function so it may be dropped.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me> #nvme
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/1657109034-206040-6-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With new API blk_mq_is_reserved_rq() we can tell if a request is from
the reserved pool, so stop passing 'reserved' arg. There is actually
only a single user of that arg for all the callback implementations, which
can use blk_mq_is_reserved_rq() instead.
This will also allow us to stop passing the same 'reserved' around the
blk-mq iter functions next.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/1657109034-206040-4-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ADATA IM2P33F8ABR1 reports bogus eui64 values that appear to be the same
across all drives. Quirk them out so they are not marked as "non globally
unique" duplicates.
Co-developed-by: Felipe de Jesus Araujo da Conceição <felipe.conceicao@petrosoftdesign.com>
Signed-off-by: Felipe de Jesus Araujo da Conceição <felipe.conceicao@petrosoftdesign.com>
Signed-off-by: Lamarque V. Souza <lamarque.souza@petrosoftdesign.com>
Cc: stable@vger.kernel.org
Signed-off-by: Christoph Hellwig <hch@lst.de>
If the clear_ids attribute is set to true, the EUI/GUID/UUID is cleared
for the passthru target. By default, loop targets will set clear_ids to
true.
This resolves an issue where a connect to a passthru target fails when
using a trtype of 'loop' because EUI/GUID/UUID is not unique.
Fixes: 2079f41ec6 ("nvme: check that EUI/GUID/UUID are globally unique")
Signed-off-by: Alan Adamson <alan.adamson@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We encountered a problem that the disconnect command hangs.
After analyzing the log and stack, we found that the triggering
process is as follows:
CPU0 CPU1
nvme_rdma_error_recovery_work
nvme_rdma_teardown_io_queues
nvme_do_delete_ctrl nvme_stop_queues
nvme_remove_namespaces
--clear ctrl->namespaces
nvme_start_queues
--no ns in ctrl->namespaces
nvme_ns_remove return(because ctrl is deleting)
blk_freeze_queue
blk_mq_freeze_queue_wait
--wait for ns to unquiesce to clean infligt IO, hang forever
This problem was not found in older kernels because we will flush
err work in nvme_stop_ctrl before nvme_remove_namespaces.It does not
seem to be modified for functional reasons, the patch can be revert
to solve the problem.
Revert commit 794a4cb3d2 ("nvme: remove the .stop_ctrl callout")
Signed-off-by: Ruozhu Li <liruozhu@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
queue stoppage and inflight requests cancellation is fully fenced from
io_work and thus failing a request from this context. Hence we don't
need to try to guess from the socket retcode if this failure is because
the queue is about to be torn down or not.
We are perfectly safe to just fail it, the request will not be cancelled
later on.
This solves possible very long shutdown delays when the users issues a
'nvme disconnect-all'
Reported-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Data digest calculation iterates over command mapped iovec. However
since commit bac04454ef we unmap the iovec before we handle the data
digest, and since commit 69b85e1f1d we clear nr_mapped when we unmap
the iov.
Instead of open-coding the command iov traversal, simply call
crypto_ahash_digest with the command sg that is already allocated (we
already do that for the send path). Rename nvmet_tcp_send_ddgst to
nvmet_tcp_calc_ddgst and call it from send and recv paths.
Fixes: 69b85e1f1d ("nvmet-tcp: add an helper to free the cmd buffers")
Fixes: bac04454ef ("nvmet-tcp: fix kmap leak when data digest in use")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
