IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The earlier 'l' value of 0x3e is for 1.5GHz. Not all SKUs support
this frequency. Hence set it to 0x2d to get 1.1GHz which is
supported in all SKUs.
The frequency can still increase above this initial configuration
made here when the cpufreq driver picks a different OPP.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Fixes: c7ef7fbb1ccf ("clk: qcom: apss-ipq-pll: add support for IPQ5332")
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/00e6be6cb9cee56628123a64ade118d0a752018b.1697781921.git.quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The set rate and determine rate operations are different between
Stromer and Stromer Plus PLLs. Since the programming sequence is
different, the PLLs dont get configured properly and random,
inexplicable crash/freeze is seen. Hence, use stromer plus ops
for ipq_pll_stromer_plus.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Fixes: c7ef7fbb1ccf ("clk: qcom: apss-ipq-pll: add support for IPQ5332")
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/c86ecaa23dc4f39650bcf4a3bd54a617a932e4fd.1697781921.git.quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stromer plus APSS PLL does not support dynamic frequency scaling.
To switch between frequencies, we have to shut down the PLL,
configure the L and ALPHA values and turn on again. So introduce the
separate set of ops for Stromer Plus PLL.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/2affa6c63ff0c4342230623a7d4eef02ec7c02d4.1697781921.git.quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The config IPQ_APSS_6018 should depend on QCOM_SMEM, to
avoid the following error reported by 'kernel test robot'
loongarch64-linux-ld: drivers/clk/qcom/apss-ipq6018.o: in function `apss_ipq6018_probe':
>> apss-ipq6018.c:(.text+0xd0): undefined reference to `qcom_smem_get_soc_id'
Fixes: 5e77b4ef1b19 ("clk: qcom: Add ipq6018 apss clock controller")
Reported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/r/202310181650.g8THtfsm-lkp@intel.com/
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/f4c4d65a7cb71e807d6d472c63c7718408c8f5f0.1697781921.git.quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Instead of manually specifying the RINGOSC_CAL_L and CAL_L values in the
alpha_pll_config.l field, use the proper clk_lucid_ole_pll_configure()
function to configure the PLL.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231016084356.1301854-2-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Instead of manually specifying the RINGOSC_CAL_L and CAL_L values in the
alpha_pll_config.l field, use the proper clk_lucid_ole_pll_configure()
function to configure the PLL.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231016084356.1301854-1-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other and pull in various other headers. In
preparation to fix this, adjust the includes for what is actually needed.
of_device.h isn't needed, but mod_devicetable.h and platform_device.h were
implicitly included by it.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231010205710.1585232-1-robh@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
qcom_msm8996_cbf_icc_remove() returned zero unconditionally. After
changing this function to return void instead, the driver can be
converted trivially to use .remove_new().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230911151548.672485-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The TWL6032 has some clock outputs which are controlled like
fixed-voltage regulators, in some drivers for these chips
found in the wild, just the regulator api is abused for controlling
them, so simply use something similar to the regulator functions.
Due to a lack of hardware available for testing, leave out the
TWL6030-specific part of those functions.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20230916100515.1650336-5-andreas@kemnade.info
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add the check for the return value of mtk_alloc_clk_data() in order to
avoid NULL pointer dereference.
Fixes: e9862118272a ("clk: mediatek: Add MT2701 clock support")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20230901024658.23405-1-jiasheng@iscas.ac.cn
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add the check for the return value of mtk_alloc_clk_data() in order to
avoid NULL pointer dereference.
Fixes: 3b5e748615e7 ("clk: mediatek: add clock support for MT7629 SoC")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20230912093407.21505-5-jiasheng@iscas.ac.cn
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add the check for the return value of mtk_alloc_clk_data() in order to
avoid NULL pointer dereference.
Fixes: 3b5e748615e7 ("clk: mediatek: add clock support for MT7629 SoC")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20230912093407.21505-4-jiasheng@iscas.ac.cn
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add the check for the return value of mtk_alloc_clk_data() in order to
avoid NULL pointer dereference.
Fixes: 96596aa06628 ("clk: mediatek: add clk support for MT6797")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20230912093407.21505-3-jiasheng@iscas.ac.cn
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add the check for the return value of mtk_alloc_clk_data() in order to
avoid NULL pointer dereference.
Fixes: 710774e04861 ("clk: mediatek: Add MT6779 clock support")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20230912093407.21505-2-jiasheng@iscas.ac.cn
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add the check for the return value of mtk_alloc_clk_data() in order to
avoid NULL pointer dereference.
Fixes: 1aca9939bf72 ("clk: mediatek: Add MT6765 clock support")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20230912093407.21505-1-jiasheng@iscas.ac.cn
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The corresponding allocation is:
> npcm7xx_clk_data = kzalloc(struct_size(npcm7xx_clk_data, hws,
> NPCM7XX_NUM_CLOCKS), GFP_KERNEL);
... so, kfree should be applied to npcm7xx_clk_data, not
npcm7xx_clk_data->hws.
Fixes: fcfd14369856 ("clk: npcm7xx: add clock controller")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20230923133127.1815621-1-j.neuschaefer@gmx.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This code checks "if (parent_hw)" is non-NULL, but then it has more
checks if parent_hw is non-NULL on the lines inside the if statement.
It is a bit confusing.
For the else statement, keep in mind that at the start of the function
we checked:
if (!(parent_name || parent_hw))
return ERR_PTR(-EINVAL);
That check ensures that if parent_hw is NULL that means that parent_name
is non-NULL. At least one must always be non-NULL. So here again, the
checks inside the if statement can be removed.
In the original code, it was a bit confusing and you could easily get
the impression that "init.num_parents" could be zero. When we remove
the unnecessary checking it's more obvious that it's always set to 1.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/7782b4f1-deed-49dc-8207-b6ea06d7602f@moroto.mountain
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The "div" pointer is freed in _register_divider() and again in
of_ti_divider_clk_setup(). Delete the free in _register_divider()
Fixes: fbbc18591585 ("clk: ti: divider: cleanup _register_divider and ti_clk_get_div_table")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/6d36eeec-6c8a-4f11-a579-aa3cd7c38749@moroto.mountain
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The clk_register_divider() and clk_register_mux() functions returns
error pointers on error but this code checks for NULL. Fix that.
Fixes: b9e0d40c0d83 ("clk: keystone: add Keystone PLL clock driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/d9da4c97-0da9-499f-9a21-1f8e3f148dc1@moroto.mountain
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
When CONFIG_OF is disabled then the matching table is not referenced and
the following warning appears:
drivers/clk/ralink/clk-mtmips.c:821:34: warning: unused variable 'mtmips_of_match' [-Wunused-const-variable]
821 | static const struct of_device_id mtmips_of_match[] = {
| ^
There are two match tables in the driver: one for the clock driver and the
other for the reset driver. The only difference between them is that the
clock driver uses 'data' and does not have 'ralink,rt2880-reset' compatible.
Both just can be merged into a single one just by adding the compatible
'ralink,rt2880-reset' entry to 'mtmips_of_match[]', which will allow it to
be used for 'mtmips_clk_driver' (which doesn't use the data) as well as for
'mtmips_clk_init()' (which doesn't need get called for 'ralink,rt2880-reset').
Doing in this way ensures that 'CONFIG_OF' is not disabled anymore so the
above warning disapears.
Fixes: 6f3b15586eef ("clk: ralink: add clock and reset driver for MTMIPS SoCs")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307242310.CdOnd2py-lkp@intel.com/
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20230827023932.501102-1-sergio.paracuellos@gmail.com
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Regression fixes for mcbsp audio clock, and for ams-delta modem. And two
warning fixes. These all can be merged whenever and are not urgent by any
means. Feel free to defer to the merge window unless other fixes are still
pending.
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAmUvahYRHHRvbnlAYXRv
bWlkZS5jb20ACgkQG9Q+yVyrpXPUABAAkgPuJ3bP7psSvq7UFSTkqiGv+4CpRd9N
cWDwAav+P//O0zraz+wUmI5r5EAelgjFCp5G/SpslOGyiSXE7kZWA81qjDWu/4al
ynpnjXB0AxdDYvGtzdFU+hfmEz83Zch2KFg4/9TQLVtHMG2vAEoUJl9wwBL1Prsg
v+vMSzL9ocrkfCBssSVO+pYia8ExQcq+wQ+FQwztg/nHEcbmQi03ltysKXuNnTqY
8qQRxQ4t8Bt6k+cYxSupQPTyWquBYWQ+CI4gpSBVwx8we0+BlP2iORTV9MTKmai+
9fC2aSmUMbrDQU14+Nk85P3DsCYFQh7Pc6EnF06UF65JoASzYYFTCIb8v71UIuec
3ZD6EshtPH7PU6gbjE5dfCR/zM5DU7Srl413x4QTenR3N4IqemV/GeiENXxT3MhR
5HUxtGd0dYKTxLfQpesuAVQMwCGC+gfUZnEZINWOZA+6zy1HOp/WgO6+upGzbdUC
0jz9k5Yd+trFjcIcLahonTwY8anr24dsMMzzRhoYoL08igRqGVhnvhAkMJuRMfjX
jVy+c+SWloPRDernRZoYtiLEJeyC5UQ6HP06hXYkCEYODpBDcoXG1QeIGAE2F7wv
2GvCzpvuwZj1/6duCHizc2uzJHE7dQuPCfTyPT9kprn8l3ovMEY11Z9qtQdQUkgG
dvogfq7tHig=
=3fOd
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=u4lX
-----END PGP SIGNATURE-----
Merge tag 'omap-fixes-audio-clock-and-modem-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Few minor fixes for omaps
Regression fixes for mcbsp audio clock, and for ams-delta modem. And two
warning fixes. These all can be merged whenever and are not urgent by any
means. Feel free to defer to the merge window unless other fixes are still
pending.
* tag 'omap-fixes-audio-clock-and-modem-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
clk: ti: Fix missing omap5 mcbsp functional clock and aliases
clk: ti: Fix missing omap4 mcbsp functional clock and aliases
ARM: OMAP1: ams-delta: Fix MODEM initialization failure
ARM: OMAP: timer32K: fix all kernel-doc warnings
ARM: omap2: fix a debug printk
Link: https://lore.kernel.org/r/pull-1697606314-911862@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Main additions this time include:
1. SCMI v3.2 clock configuration support:
This helps to retrieve the enabled state of a clock as well as allow
to set OEM specific clock configurations.
2. Support for generic performance scaling(DVFS):
The current SCMI DVFS support is limited to the CPUs in the kernel.
This extension enables it to used for all kind of devices and not
only for the CPUs. It updates the SCMI cpufreq to utilize the power
domain bindings. It also adds a more generic SCMI performance domain
based on the genpd framework that as be used for all the non-CPU
devices.
3. Extend the generic performance scaling(DVFS) support for firmware
driver OPPs:
Consumer drivers for devices that are attached to the SCMI performance
domain can't make use of the current OPP library to scale performance
as the OPPs are firmware driven and often obtained from the firmware
rather than the device tree. These changes extend the generic OPP
and genpd PM domain frameworks to identify and utilise these firmware
driven OPPs.
4. SCMI v3.2 clock parent support:
This enables the support for discovering and changing parent clocks
and extending the SCMI clk driver to use the same.
5. Qualcom SMC/HVC transport support:
The Qualcomm virtual platforms require capability id in the hypervisor
call to identify which doorbell to assert when supporting multiple
SMC/HVC based SCMI transport channels. Extra parameter is added to
support the same and the same is obtained at the fixed address in the
shared memory which is initialised by the firmware.
6. Move the existing SCMI power domain driver under drivers/pmdomain
Apart from the above main changes, it also include couple of minor fixes
and cosmetic reworks.
-----BEGIN PGP SIGNATURE-----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=IbXh
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=u9+1
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.7
Main additions this time include:
1. SCMI v3.2 clock configuration support:
This helps to retrieve the enabled state of a clock as well as allow
to set OEM specific clock configurations.
2. Support for generic performance scaling(DVFS):
The current SCMI DVFS support is limited to the CPUs in the kernel.
This extension enables it to used for all kind of devices and not
only for the CPUs. It updates the SCMI cpufreq to utilize the power
domain bindings. It also adds a more generic SCMI performance domain
based on the genpd framework that as be used for all the non-CPU
devices.
3. Extend the generic performance scaling(DVFS) support for firmware
driver OPPs:
Consumer drivers for devices that are attached to the SCMI performance
domain can't make use of the current OPP library to scale performance
as the OPPs are firmware driven and often obtained from the firmware
rather than the device tree. These changes extend the generic OPP
and genpd PM domain frameworks to identify and utilise these firmware
driven OPPs.
4. SCMI v3.2 clock parent support:
This enables the support for discovering and changing parent clocks
and extending the SCMI clk driver to use the same.
5. Qualcom SMC/HVC transport support:
The Qualcomm virtual platforms require capability id in the hypervisor
call to identify which doorbell to assert when supporting multiple
SMC/HVC based SCMI transport channels. Extra parameter is added to
support the same and the same is obtained at the fixed address in the
shared memory which is initialised by the firmware.
6. Move the existing SCMI power domain driver under drivers/pmdomain
Apart from the above main changes, it also include couple of minor fixes
and cosmetic reworks.
* tag 'scmi-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (37 commits)
firmware: arm_scmi: Add qcom smc/hvc transport support
dt-bindings: arm: Add new compatible for smc/hvc transport for SCMI
firmware: arm_scmi: Convert u32 to unsigned long to align with arm_smccc_1_1_invoke()
clk: scmi: Add support for clock {set,get}_parent
firmware: arm_scmi: Add support for clock parents
clk: scmi: Free scmi_clk allocated when the clocks with invalid info are skipped
firmware: arm_scpi: Use device_get_match_data()
firmware: arm_scmi: Add generic OPP support to the SCMI performance domain
firmware: arm_scmi: Specify the performance level when adding an OPP
firmware: arm_scmi: Simplify error path in scmi_dvfs_device_opps_add()
OPP: Extend support for the opp-level beyond required-opps
OPP: Switch to use dev_pm_domain_set_performance_state()
OPP: Extend dev_pm_opp_data with a level
OPP: Add dev_pm_opp_add_dynamic() to allow more flexibility
PM: domains: Implement the ->set_performance_state() callback for genpd
PM: domains: Introduce dev_pm_domain_set_performance_state()
firmware: arm_scmi: Rename scmi_{msg_,}clock_config_{get,set}_{2,21}
firmware: arm_scmi: Do not use !! on boolean when setting msg->flags
firmware: arm_scmi: Move power-domain driver to the pmdomain dir
pmdomain: arm: Add the SCMI performance domain
...
Link: https://lore.kernel.org/r/20231010124347.1620040-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We are using a wrong mcbsp functional clock. The interconnect target module
driver provided clock for mcbsp is not same as the mcbsp functional clock
known as the gfclk main_clk. The mcbsp functional clocks for mcbsp should
have been added before we dropped the legacy platform data.
Additionally we are also missing the clock aliases for the clocks used by
the audio driver if reparenting is needed. This causes audio driver errors
like "CLKS: could not clk_get() prcm_fck" for mcbsp as reported by Andreas.
The mcbsp clock aliases too should have been added before we dropped the
legacy platform data.
Let's add the clocks and aliases with a single patch to fix the issue
similar to omap4. On omap5, there is no mcbsp4 instance on the l4_per
interconnect.
Fixes: b1da0fa21bd1 ("ARM: OMAP2+: Drop legacy platform data for omap5 mcbsp")
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Reported-by: Andreas Kemnade <andreas@kemnade.info>
Reported-by: Péter Ujfalusi <peter.ujfalusi@gmail.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We are using a wrong mcbsp functional clock. The interconnect target module
driver provided clock for mcbsp is not same as the mcbsp functional clock
known as the gfclk main_clk. The mcbsp functional clocks for mcbsp should
have been added before we dropped the legacy platform data.
Additionally we are also missing the clock aliases for the clocks used by
the audio driver if reparenting is needed. This causes audio driver errors
like "CLKS: could not clk_get() prcm_fck" for mcbsp as reported by Andreas.
The mcbsp clock aliases too should have been added before we dropped the
legacy platform data.
Let's add the clocks and aliases with a single patch to fix the issue.
Fixes: 349355ce3a05 ("ARM: OMAP2+: Drop legacy platform data for omap4 mcbsp")
Reported-by: Andreas Kemnade <andreas@kemnade.info>
Reported-by: Péter Ujfalusi <peter.ujfalusi@gmail.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The divider_ro_round_rate() function could potentially return -EINVAL on
error but the error handling doesn't work because "rate" is unsigned.
It should be a type long.
Fixes: 06ed0fc0fbac ("clk: stm32: composite: Switch to determine_rate")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/d9a78453-9b40-48c1-830e-00751ba3ecb8@kili.mountain
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In the possible_parent_show function, ensure proper handling of the return
value from of_clk_get_parent_name to prevent potential issues arising from
a NULL return.
The current implementation invokes seq_puts directly on the result of
of_clk_get_parent_name without verifying the return value, which can lead
to kernel panic if the function returns NULL.
This patch addresses the concern by introducing a check on the return
value of of_clk_get_parent_name. If the return value is not NULL, the
function proceeds to call seq_puts, providing the returned value as
argument.
However, if of_clk_get_parent_name returns NULL, the function provides a
static string as argument, avoiding the panic.
Fixes: 1ccc0ddf046a ("clk: Use seq_puts() in possible_parent_show()")
Reported-by: Philip Daly <pdaly@redhat.com>
Signed-off-by: Alessandro Carminati (Red Hat) <alessandro.carminati@gmail.com>
Link: https://lore.kernel.org/r/20230921073217.572151-1-alessandro.carminati@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Commit 9607beb917df ("clk: socfpga: gate: Add a determine_rate hook")
added a determine_rate implementation set to the
clk_hw_determine_rate_no_reparent, but failed to account for the
internal divider that wasn't used before anywhere but in recalc_rate.
This led to inconsistencies between the clock rate stored in
clk_core->rate and the one returned by clk_round_rate() that leverages
determine_rate().
Since that driver seems to be widely used (and thus regression-prone)
and not supporting rate changes (since it's missing a .set_rate
implementation), we can just report the current divider programmed in
the clock but not try to change it in any way.
This should be good enough to fix the issues reported, and if someone
ever wants to allow the divider to change then it should be easy enough
using the clk-divider helpers.
Link: https://lore.kernel.org/linux-clk/20231005095927.12398-2-b.spranger@linutronix.de/
Fixes: 9607beb917df ("clk: socfpga: gate: Add a determine_rate hook")
Reported-by: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20231012083729.2148044-1-mripard@kernel.org
[sboyd@kernel.org: Fix hw -> hwclk]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In light of the recent discovery that the fractional divisor
approximation does not utilize the full available range for clocks that
are flagged CLK_FRAC_DIVIDER_ZERO_BASED [1], implement tests for the
edge cases of this clock type.
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Link: https://lore.kernel.org/lkml/20230529133433.56215-1-frank@oltmanns.dev [1]
Link: https://lore.kernel.org/r/20230617131041.18313-3-frank@oltmanns.dev
[sboyd@kernel.org: Rename suite and tests slightly, drop unused
includes, store parent rate to compare instead of repeating equation]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Consider the CLK_FRAC_DIVIDER_ZERO_BASED flag when finding the best
approximation for m and n. By doing so, increase the range of valid
values for the numerator and denominator by 1.
Furthermore, export the approximation function so that users of this
function can be compiled as modules.
Cc: A.s. Dong <aisheng.dong@nxp.com>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Link: https://lore.kernel.org/r/20230617131041.18313-2-frank@oltmanns.dev
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add clock and reset support for the SDHI1 and SDHI2 blocks on the
RZ/G3S (R9A08G045) SoC.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231010132701.1658737-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use the %x format specifier to print CLK_ON_R(). This makes debugging
easier as the value printed will be hexadecimal like in the hardware
manual. Along with it add "0x" in front of the printed value.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231010132701.1658737-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add minimal clock and reset support for the RZ/G3S SoC to be able to
boot Linux from SD Card/eMMC. This includes necessary core clocks for
booting and GIC, SCIF, GPIO, and SD0 module clocks and resets.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231006103959.197485-5-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add a divider clock driver for RZ/G3S. This will be used on RZ/G3S for
the SDHI, SPI, OCTA, I, I2, I3, P0, P1, P2, and P3 core clocks.
The divider has some limitation for SDHI, OCTA and SPI clocks:
- SDHI div cannot be 1 if parent rate is 800MHz,
- OCTA, SPI div cannot be 1 if parent rate is 400MHz.
To handle these limitations, a notifier is registered from platform
specific clock driver, which makes sure proper actions are taken before
the clock rate is changed, when needed.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231006103959.197485-4-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Refactor SD MUX driver to be able to reuse the same code on RZ/G3S.
RZ/G2{L,UL} has a limitation with regards to switching the clock source
for SD MUX (MUX clock source has to be switched to 266MHz before
switching b/w 533MHz and 400MHz). Rework the handling of this limitation
to use a clock notifier that is registered according to platform based
initialization data, so the SD MUX code can be reused on RZ/G3S.
As RZ/G2{L,UL} and RZ/G3S use different bits in different registers to
check if the clock switching has been done, this configuration (register
offset, register bits and bitfield width) is now passed through struct
cpg_core_clk::sconf (status configuration) from platform specific
initialization code.
Along with struct cpg_core_clk::sconf the mux table indices are also
passed from platform specific initialization code.
Also, mux flags are now passed to DEF_SD_MUX() as they will be used
later by RZ/G3S.
CPG_WEN_BIT macro has been introduced to select properly the WEN bit
of various registers.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231006103959.197485-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230929-clk-maple-versaclk-v1-4-24dd5b3d8689@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230929-clk-maple-versaclk-v1-3-24dd5b3d8689@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230929-clk-maple-versaclk-v1-2-24dd5b3d8689@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The versaclock3 driver provides an _is_writeable() function which returns
true for all registers. This is the default assumption for regmaps so we
can remove the function for a very minor improvement in performance and
code size.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230929-clk-maple-versaclk-v1-1-24dd5b3d8689@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230929-clk-maple-si-v1-5-e26cfcaf27bd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230929-clk-maple-si-v1-4-e26cfcaf27bd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230929-clk-maple-si-v1-3-e26cfcaf27bd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230929-clk-maple-si-v1-2-e26cfcaf27bd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230929-clk-maple-si-v1-1-e26cfcaf27bd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230929-clk-rbtree-cdce925-v1-1-a36b459002f7@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Transform the existing clk_leaf_mux_set_rate_parent test into a
parameterized test that calls the various determine rate APIs that exist
for clk providers. This ensures that whatever determine rate API is used
by a clk provider will return the correct parent in the best_parent_hw
pointer of the clk_rate_request because clk_rate_requests are forwarded
properly.
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230912175534.2427862-3-sboyd@kernel.org
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Running this kunit test with lockdep enabled leads to warning splats
about calling clk provider APIs without the clk_prepare lock held. I
proposed adding a wrapper around these APIs to grab the prepare lock so
we can call them from anywhere, and Maxime implemented that approach[1],
but it didn't look great. That's because we had to make more kunit
testing APIs just to call code from a place that isn't a clk provider
when the prepare lock isn't held.
Instead of doing that, let's implement a determine_rate clk_op for a new
leaf clk that is the child of the existing leaf clk. We can call
__clk_determine_rate() on the existing leaf clk from there, and stash
away the clk_rate_request struct to check once the clk_op returns. Drive
that clk_op by calling clk_round_rate() to keep things similar to how it
was before (i.e. nothing actually changes rate, just the new rate is
determined). This silences the warning by driving the test from a
clk_op where we know the prepare lock is held.
While looking at this in more detail, it was determined that the code we
intended to test in commit 262ca38f4b6e ("clk: Stop forwarding
clk_rate_requests to the parent") wasn't actually tested. The call to
__clk_determine_rate() wasn't actually getting to the newly introduced
code under the CLK_SET_RATE_PARENT if condition in
clk_core_round_rate_nolock() because the parent clk (the mux) could
round rates. We introduce a new leaf and make sure the parent of that
clk has no clk_ops so that we can be certain that the
CLK_SET_RATE_PARENT condition in clk_core_round_rate_nolock() is
evaluated.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/linux-clk/2b594e50-2bbf-4a2d-88e6-49fc39f3957a@roeck-us.net/
Reported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202301310919.b9d56ee3-yujie.liu@intel.com
Cc: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230721-clk-fix-kunit-lockdep-v1-0-32cdba4c8fc1@kernel.org [1]
Fixes: 262ca38f4b6e ("clk: Stop forwarding clk_rate_requests to the parent")
Link: https://lore.kernel.org/r/20230912175534.2427862-2-sboyd@kernel.org
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add the missing devm_kfree() when we skip the clocks with invalid or
missing information from the firmware.
Cc: Cristian Marussi <cristian.marussi@arm.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Fixes: 6d6a1d82eaef ("clk: add support for clocks provided by SCMI")
Link: https://lore.kernel.org/r/20231004193600.66232-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Remove CPG_SDHI_DSEL and its bits from the generic header as RZ/G3S has
different offset registers and bits for this, thus avoid mixing them.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-10-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
