IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Cancel blink_work before we start link blinking. Another worker will be
scheduled after the state variables are updated.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220911145122.15444-9-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The blinking code to signal that a link is up has the same big if clause
around it as most other blink events.
Revert this if condition and exit if we're already blinking to show that
the link is up.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220911145122.15444-8-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Always update the status variables in rtw_led_control when we start tx/rx
blinking. The if statements are not necessary.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220911145122.15444-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cancel blink_work before we start tx/rx blinking. Another worker will be
scheduled after the state variables are updated.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220911145122.15444-6-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The code for tx/rx blinking is wrapped into a big if clause to prevent
restarting if tx/rx blinking is already running.
Revert the if condition and exit if tx/rx blinking is running. This does
not change the behaviour.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220911145122.15444-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Always update the status variables in rtw_led_control when we start scan
blinking. The if statements are not necessary.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220911145122.15444-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cancel blink_work before we start scan blinking. Another worker will be
scheduled after the state variables are updated.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220911145122.15444-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The code for scan blinking is wrapped into a big if clause to prevent
restarting if scan blinking is already running.
Revert the if condition and exit if scan blinking is running. This does
not change the behaviour.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220911145122.15444-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In rtw_init_cmd_priv(), if `pcmdpriv->rsp_allocated_buf` is allocated
in failure, then `pcmdpriv->cmd_allocated_buf` will not be properly
released. Besides, considering there are only two error paths and the
first one can directly return, we do not need to implicitly jump to the
`exit` tag to execute the error handling code.
So this patch added `kfree(pcmdpriv->cmd_allocated_buf);` on the error
path to release the resource and simplified the return logic of
rtw_init_cmd_priv(). As there is no proper device to test with, no
runtime testing was performed.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Link: https://lore.kernel.org/r/tencent_1B6AAE10471D4556788892F8FF3E4812F306@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ndo_start_xmit field in net_device_ops is expected to be of type
netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).
The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.
The return type of cvm_oct_xmit and cvm_oct_xmit_pow should be changed
from int to netdev_tx_t.
Link: https://github.com/ClangBuiltLinux/linux/issues/1703
Cc: llvm@lists.linux.dev
Reported-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Link: https://lore.kernel.org/r/20220914211057.423617-1-nhuck@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ndo_start_xmit field in net_device_ops is expected to be of type
netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).
The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.
The return type of ieee80211_xmit should be changed from int to
netdev_tx_t.
Link: https://github.com/ClangBuiltLinux/linux/issues/1703
Cc: llvm@lists.linux.dev
Reported-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Link: https://lore.kernel.org/r/20220914210750.423048-1-nhuck@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In some initialization functions of this driver, memory is allocated with
'i' acting as an index variable and increasing from 0. The commit in
"Fixes" introduces some clean-up codes in case of allocation failure,
which free memory in reverse order with 'i' decreasing to 0. However,
there are some problems:
- The case i=0 is left out. Thus memory is leaked.
- In case memory allocation fails right from the start, the memory
freeing loops will start with i=-1 and invalid memory locations will
be accessed.
One of these loops has been fixed in commit c8ff91535880 ("staging:
vt6655: fix potential memory leak"). Fix the remaining erroneous loops.
Link: https://lore.kernel.org/linux-staging/Yx9H1zSpxmNqx6Xc@kadam/
Fixes: 5341ee0adb17 ("staging: vt6655: check for memory allocation failures")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Signed-off-by: Nam Cao <namcaov@gmail.com>
Link: https://lore.kernel.org/r/20220912170429.29852-1-namcaov@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes switch and case as linux kernel coding style
and amend this error generated by checkpatch:
ERROR: switch and case should be at the same indent
Signed-off-by: Kang Minchul <tegongkang@gmail.com>
Link: https://lore.kernel.org/r/20220922122310.3379711-4-tegongkang@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes following warning generated by checkpatch:
WARNING: Comparisons should place the constant on the right side of the test
Signed-off-by: Kang Minchul <tegongkang@gmail.com>
Link: https://lore.kernel.org/r/20220922122310.3379711-3-tegongkang@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes error below generated by checkpatch
ERROR: code indent should use tabs where possible
Signed-off-by: Kang Minchul <tegongkang@gmail.com>
Link: https://lore.kernel.org/r/20220922122310.3379711-2-tegongkang@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes checkpatch warning as follows:
WARNING: Missing a blank line after declarations
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kang Minchul <tegongkang@gmail.com>
Link: https://lore.kernel.org/r/20220917181620.3237192-1-tegongkang@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit cleans up checkpatch warning as follows:
WARNING: braces {} are not necessary for single statement blocks
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kang Minchul <tegongkang@gmail.com>
Link: https://lore.kernel.org/r/20220913162510.3134430-1-tegongkang@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In rtw_init_cmd_priv(), if `pcmdpriv->rsp_allocated_buf` is allocated
in failure, then `pcmdpriv->cmd_allocated_buf` will be not properly
released. Besides, considering there are only two error paths and the
first one can directly return, so we do not need implicitly jump to the
`exit` tag to execute the error handler.
So this patch added `kfree(pcmdpriv->cmd_allocated_buf);` on the error
path to release the resource and simplified the return logic of
rtw_init_cmd_priv(). As there is no proper device to test with, no runtime
testing was performed.
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Link: https://lore.kernel.org/r/tencent_2B7931B79BA38E22205C5A09EFDF11E48805@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In rtw_init_drv_sw(), there are various init functions are called to
populate the padapter structure and some checks for their return value.
However, except for the first one error path, the other five error paths
do not properly release the previous allocated resources, which leads to
various memory leaks.
This patch fixes them and keeps the success and error separate.
Note that these changes keep the form of `rtw_init_drv_sw()` in
"drivers/staging/r8188eu/os_dep/os_intfs.c". As there is no proper device
to test with, no runtime testing was performed.
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Link: https://lore.kernel.org/r/tencent_C3B899D2FC3F1BC827F3552E0B0734056006@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove "Unnecessary ftrace-like logging" as requested by checkpatch.
Remove multiline macro as it is not needed anymore and not liked by
kernel community.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/2c41e6856cd37b4f3e5cb1108272bcc24032bf64.1663387785.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of invoking a synchronize_rcu() to free a pointer after a grace
period, we can directly make use of a new API that does the same but in
a more efficient way.
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20220920135145.1387-1-shangxiaojing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
p80211wext_handler_def has been removed since
commit cb3126e60ffc ("Staging: wlan-ng: Switch from wext
to cfg80211"), so remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20220911094255.3225461-1-cuigaosheng1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename function MACvSetCurrAC0DescAddrEx to vt6655_mac_set_curr_ac_0...
to avoid CamelCase which is not accepted by checkpatch.pl. Remove
unnecessary declaration of function and make function static. Remove
unnecessary line break.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/dc3f83dfa8b83a02ed95da3cfb71c0139ba8b674.1662890990.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename function MACvSetCurrTx0DescAddrEx to vt6655_mac_set_curr_tx_0_...
to avoid CamelCase which is not accepted by checkpatch.pl. Remove
unnecessary declaration of function and make function static. Remove
unnecessary line break.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/4337deed83e1443ebf93c5591e17f5c6dfe0cf55.1662890990.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename function MACbSafeSoftwareReset to vt6655_mac_save_soft_reset and
abyTmpRegData to tmp_reg_data to avoid CamelCase which is not accepted by
checkpatch.pl. Remove return value bRetVal as it is unused by the calling
functions. Remove unnecessary declaration of function and make function
static. Change declaration of tmp_reg_data to shorten code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/540a684266610f7618b3ef6000d4699d065c8e6f.1662890990.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename function MACvRestoreContext to vt6655_mac_restore_context to avoid
CamelCase which is not accepted by checkpatch.pl. Remove unnecessary
declaration of function and make function static. Change declaration of
cxt_buf to shorten code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/3d215bbf1675fd093c9b31fbf3b29ce09432ab27.1662890990.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename function MACvSaveContext to vt6655_mac_save_context to avoid
CamelCase which is not accepted by checkpatch.pl. Remove unnecessary
declaration of function and make function static. Change declaration of
cxt_buf to shorten code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/f514711695f1eafde9996edcc246da2adcd5f9c5.1662890990.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename function MACvSetLoopbackMode to vt6655_mac_set_loopback_mode and
byLoopbackMode to loopback_mode to avoid CamelCase which is not accepted
by checkpatch.pl. Remove unnecessary declaration of function and made
function static. Change declaration of loopback_mode to shorten code and
remove unnecessary line break.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/02ce61620e13eb7fd24833e59a288f52bf5b9730.1662890990.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
