IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit e959c279d391c10b35ce300fb4b0fe3b98e86bd2 ]
If objtool runs into a problem that causes it to exit early, the overall
tool still returns a status code of 0, which causes the build to
continue as if nothing went wrong.
Note this only affects early errors, as later errors are still ignored
by check().
Fixes: b51277eb9775 ("objtool: Ditch subcommands")
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Link: https://lore.kernel.org/r/cb6a28832d24b2ebfafd26da9abb95f874c83045.1696355111.git.aplattner@nvidia.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23c9519def98ee0fa97ea5871535e9b136f522fc ]
find_energy_efficient_cpu() bails out early if effective util of the
task is 0 as the delta at this point will be zero and there's nothing
for EAS to do. When uclamp is being used, this could lead to wrong
decisions when uclamp_max is set to 0. In this case the task is capped
to performance point 0, but it is actually running and consuming energy
and we can benefit from EAS energy calculations.
Rework the condition so that it bails out when both util and uclamp_min
are 0.
We can do that without needing to use uclamp_task_util(); remove it.
Fixes: d81304bc6193 ("sched/uclamp: Cater for uclamp in find_energy_efficient_cpu()'s early exit condition")
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230916232955.2099394-3-qyousef@layalina.io
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b00a40147653c8ea748e8f4396510f252763364 ]
When uclamp_max is being used, the util of the task could be higher than
the spare capacity of the CPU, but due to uclamp_max value we force-fit
it there.
The way the condition for checking for max_spare_cap in
find_energy_efficient_cpu() was constructed; it ignored any CPU that has
its spare_cap less than or _equal_ to max_spare_cap. Since we initialize
max_spare_cap to 0; this lead to never setting max_spare_cap_cpu and
hence ending up never performing compute_energy() for this cluster and
missing an opportunity for a better energy efficient placement to honour
uclamp_max setting.
max_spare_cap = 0;
cpu_cap = capacity_of(cpu) - cpu_util(p); // 0 if cpu_util(p) is high
...
util_fits_cpu(...); // will return true if uclamp_max forces it to fit
...
// this logic will fail to update max_spare_cap_cpu if cpu_cap is 0
if (cpu_cap > max_spare_cap) {
max_spare_cap = cpu_cap;
max_spare_cap_cpu = cpu;
}
prev_spare_cap suffers from a similar problem.
Fix the logic by converting the variables into long and treating -1
value as 'not populated' instead of 0 which is a viable and correct
spare capacity value. We need to be careful signed comparison is used
when comparing with cpu_cap in one of the conditions.
Fixes: 1d42509e475c ("sched/fair: Make EAS wakeup placement consider uclamp restrictions")
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230916232955.2099394-2-qyousef@layalina.io
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 066baf92bed934c9fb4bcee97a193f47aa63431c ]
copy_mc_to_user() has the destination marked __user on powerpc, but not on
x86; the latter results in a sparse warning in lib/iov_iter.c.
Fix this by applying the tag on x86 too.
Fixes: ec6347bb4339 ("x86, powerpc: Rename memcpy_mcsafe() to copy_mc_to_{user, kernel}()")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20230925120309.1731676-3-dhowells@redhat.com
cc: Dan Williams <dan.j.williams@intel.com>
cc: Thomas Gleixner <tglx@linutronix.de>
cc: Ingo Molnar <mingo@redhat.com>
cc: Borislav Petkov <bp@alien8.de>
cc: Dave Hansen <dave.hansen@linux.intel.com>
cc: "H. Peter Anvin" <hpa@zytor.com>
cc: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Christoph Hellwig <hch@lst.de>
cc: Christian Brauner <christian@brauner.io>
cc: Matthew Wilcox <willy@infradead.org>
cc: Linus Torvalds <torvalds@linux-foundation.org>
cc: David Laight <David.Laight@ACULAB.COM>
cc: x86@kernel.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0490bc9bb62d9376f3dd4ec28e03ca0fef97152 ]
We don't need to maintain per-queue leaf_cfs_rq_list on !SMP, since
it's used for cfs_rq load tracking & balancing on SMP.
But sched debug interface uses it to print per-cfs_rq stats.
This patch fixes the !SMP version of cfs_rq_is_decayed(), so the
per-queue leaf_cfs_rq_list is also maintained correctly on !SMP,
to fix the warning in assert_list_leaf_cfs_rq().
Fixes: 0a00a354644e ("sched/fair: Delete useless condition in tg_unthrottle_up()")
Reported-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Closes: https://lore.kernel.org/all/ZN87UsqkWcFLDxea@swlinux02/
Link: https://lore.kernel.org/r/20230913132031.2242151-1-chengming.zhou@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 920057ad521dc8669e534736c2a12c14ec9fb2d7 upstream.
In the regmap conversion in commit 4ef2774511dc ("hwmon: (nct6775)
Convert register access to regmap API") I reused the 'reg' variable
for all three register reads in the fan speed calculation loop in
nct6775_update_device(), but failed to notice that the value from the
first one (data->REG_FAN[i]) is actually used in the call to
nct6775_select_fan_div() at the end of the loop body. Since that
patch the register value passed to nct6775_select_fan_div() has been
(conditionally) incorrectly clobbered with the value of a different
register than intended, which has in at least some cases resulted in
fan speeds being adjusted down to zero.
Fix this by using dedicated temporaries for the two intermediate
register reads instead of 'reg'.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Fixes: 4ef2774511dc ("hwmon: (nct6775) Convert register access to regmap API")
Reported-by: Thomas Zajic <zlatko@gmx.at>
Tested-by: Thomas Zajic <zlatko@gmx.at>
Cc: stable@vger.kernel.org # v5.19+
Link: https://lore.kernel.org/r/20230929200822.964-2-zev@bewilderbeest.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7dd692217b861a8292ff8ac2c9d4458538fd6b96 upstream.
Some Chromebooks do not populate the product family DMI value resulting
in firmware load failures.
Add another quirk detection entry that looks for "Google" in the BIOS
version. Theoretically, PRODUCT_FAMILY could be replaced with
BIOS_VERSION, but it is left as a quirk to be conservative.
Cc: stable@vger.kernel.org
Signed-off-by: Mark Hasemeyer <markhas@chromium.org>
Acked-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20231020145953.v1.1.Iaf5702dc3f8af0fd2f81a22ba2da1a5e15b3604c@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c05b44e1a50d9cbfc4f731dddc436a24ddc129a upstream.
Some Jasperlake Chromebooks overwrite the system vendor DMI value to the
name of the OEM that manufactured the device. This breaks Chromebook
quirk detection as it expects the system vendor to be "Google".
Add another quirk detection entry that looks for "Google" in the BIOS
version.
Cc: stable@vger.kernel.org
Signed-off-by: Mark Hasemeyer <markhas@chromium.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231018235944.1860717-1-markhas@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8293703a492ae97c86af27c75b76e6239ec86483 upstream.
Add DEVICE_ID for J721S2 and enable support for endpoints configured
with this DEVICE_ID in the pci_endpoint_test driver.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Cc: stable <stable@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231020120248.3168406-1-s-vadapalli@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e4876dacaca46a1b09f9b417480924ab12019a5b upstream.
Some of the later revisions of the Brainboxes PX cards are based
on the Oxford Semiconductor chipset. Due to the chip's unique setup
these cards need to be initialised.
Previously these were tested against a reference card with the same broken
baudrate on another PC, cancelling out the effect. With this patch they
work and can transfer/receive find against an FTDI-based device.
Add all of the cards which require this setup to the quirks table.
Thanks to Maciej W. Rozycki for clarification on this chip.
Fixes: ef5a03a26c87 ("tty: 8250: Add support for Brainboxes PX cards.")
Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Link: https://lore.kernel.org/r/DU0PR02MB7899D222A4AB2A4E8C57108FC4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 33092fb3af51deb80849e90a17bada44bbcde6b3 upstream.
The UC-257 is a serial + LPT card, so remove it from this driver.
A patch has been submitted to add it to parport_serial instead.
Additionaly, the UC-431 does not use this card ID, only the UC-420
does. The 431 is a 3-port card and there is no generic 3-port configuration
available, so remove reference to it from this driver.
Fixes: 152d1afa834c ("tty: Add support for Brainboxes UC cards.")
Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Link: https://lore.kernel.org/r/DU0PR02MB78995ADF7394C74AD4CF3357C4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3a75b205de43365f80a33b98ec9289785da56243 upstream.
gsm_cleanup_mux() cleans up the gsm by closing all DLCIs, stopping all
timers, removing the virtual tty devices and clearing the data queues.
This procedure, however, may cause subsequent changes of the virtual modem
status lines of a DLCI. More data is being added the outgoing data queue
and the deleted kick timer is restarted to handle this. At this point many
resources have already been removed by the cleanup procedure. Thus, a
kernel panic occurs.
Fix this by proving in gsm_modem_update() that the cleanup procedure has
not been started and the mux is still alive.
Note that writing to a virtual tty is already protected by checks against
the DLCI specific connection state.
Fixes: c568f7086c6e ("tty: n_gsm: fix missing timer to handle stalled links")
Cc: stable <stable@kernel.org>
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20231026055844.3127-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e8033bde451eddfb9b1bbd6e2d848c1b5c277222 upstream.
Currently, if a USB request that was queued by Raw Gadget is interrupted
(via a signal), wait_for_completion_interruptible returns -ERESTARTSYS.
Raw Gadget then attempts to propagate this value to userspace as a return
value from its ioctls. However, when -ERESTARTSYS is returned by a syscall
handler, the kernel internally restarts the syscall.
This doesn't allow userspace applications to interrupt requests queued by
Raw Gadget (which is required when the emulated device is asked to switch
altsettings). It also violates the implied interface of Raw Gadget that a
single ioctl must only queue a single USB request.
Instead, make Raw Gadget do what GadgetFS does: check whether the request
was interrupted (dequeued with status == -ECONNRESET) and report -EINTR to
userspace.
Fixes: f2c2e717642c ("usb: gadget: add raw-gadget interface")
Cc: stable <stable@kernel.org>
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/0db45b1d7cc466e3d4d1ab353f61d63c977fbbc5.1698350424.git.andreyknvl@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4987daf86c152ff882d51572d154ad12e4ff3a4b upstream.
It is possible that typec_register_partner() returns ERR_PTR on failure.
When port->partner is an error, a NULL pointer dereference may occur as
shown below.
[91222.095236][ T319] typec port0: failed to register partner (-17)
...
[91225.061491][ T319] Unable to handle kernel NULL pointer dereference
at virtual address 000000000000039f
[91225.274642][ T319] pc : tcpm_pd_data_request+0x310/0x13fc
[91225.274646][ T319] lr : tcpm_pd_data_request+0x298/0x13fc
[91225.308067][ T319] Call trace:
[91225.308070][ T319] tcpm_pd_data_request+0x310/0x13fc
[91225.308073][ T319] tcpm_pd_rx_handler+0x100/0x9e8
[91225.355900][ T319] kthread_worker_fn+0x178/0x58c
[91225.355902][ T319] kthread+0x150/0x200
[91225.355905][ T319] ret_from_fork+0x10/0x30
Add a check for port->partner to avoid dereferencing a NULL pointer.
Fixes: 5e1d4c49fbc8 ("usb: typec: tcpm: Determine common SVDM Version")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Hu <hhhuuu@google.com>
Link: https://lore.kernel.org/r/20231020012132.100960-1-hhhuuu@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0e3139e6543b241b3e65956a55c712333bef48ac upstream.
Change lower bcdDevice value for "Super Top USB 2.0 SATA BRIDGE" to match
1.50. I have such an older device with bcdDevice=1.50 and it will not work
otherwise.
Cc: stable@vger.kernel.org
Signed-off-by: Liha Sikanen <lihasika@gmail.com>
Link: https://lore.kernel.org/r/ccf7d12a-8362-4916-b3e0-f4150f54affd@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e6f3b6d2c352b5fde37ce3fed83bdf6172eebd4 upstream.
The AMD VanGogh SoC contains a DesignWare USB3 Dual-Role Device that can be
operated as either a USB Host or a USB Device, similar to on the AMD Nolan
platform.
be6646bfbaec ("PCI: Prevent xHCI driver from claiming AMD Nolan USB3 DRD
device") added a quirk to let the dwc3 driver claim the Nolan device since
it provides more specific support.
Extend that quirk to include the VanGogh SoC USB3 device.
Link: https://lore.kernel.org/r/20230927202212.2388216-1-vi@endrift.com
Signed-off-by: Vicki Pfau <vi@endrift.com>
[bhelgaas: include be6646bfbaec reference, add stable tag]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v3.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 99248c8902f505ec064cf2b0f74629016f2f4c82 upstream.
McIntosh devices supporting native DSD require the feature to be
explicitly exposed. Add a flag that fixes an issue where DSD audio was
defaulting to DSD over PCM instead of delivering raw DSD data.
Signed-off-by: Max McCarthy <mmccarthy@mcintoshlabs.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/BL0PR13MB4433226005162D186A8DFF4AD6DFA@BL0PR13MB4433.namprd13.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 824135c46b00df7fb369ec7f1f8607427bbebeb0 upstream.
When the calling function fails after the dup_anon_vma(), the
duplication of the anon_vma is not being undone. Add the necessary
unlink_anon_vma() call to the error paths that are missing them.
This issue showed up during inspection of the error path in vma_merge()
for an unrelated vma iterator issue.
Users may experience increased memory usage, which may be problematic as
the failure would likely be caused by a low memory situation.
Link: https://lkml.kernel.org/r/20230929183041.2835469-3-Liam.Howlett@oracle.com
Fixes: d4af56c5c7c6 ("mm: start tracking VMAs with maple tree")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 51f625377561e5b167da2db5aafb7ee268f691c5 upstream.
The two users of mbind_range() are expecting that mbind_range() will
update the pointer to the previous VMA, or return an error. However,
set_mempolicy_home_node() does not call mbind_range() if there is no VMA
policy. The fix is to update the pointer to the previous VMA prior to
continuing iterating the VMAs when there is no policy.
Users may experience a WARN_ON() during VMA policy updates when updating
a range of VMAs on the home node.
Link: https://lkml.kernel.org/r/20230928172432.2246534-1-Liam.Howlett@oracle.com
Link: https://lore.kernel.org/linux-mm/CALcu4rbT+fMVNaO_F2izaCT+e7jzcAciFkOvk21HGJsmLcUuwQ@mail.gmail.com/
Fixes: f4e9e0e69468 ("mm/mempolicy: fix use-after-free of VMA iterator")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Yikebaer Aizezi <yikebaer61@gmail.com>
Closes: https://lore.kernel.org/linux-mm/CALcu4rbT+fMVNaO_F2izaCT+e7jzcAciFkOvk21HGJsmLcUuwQ@mail.gmail.com/
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b65235f6e102354ccafda601eaa1c5bef5284d21 upstream.
The following problem exists since x2avic was enabled in the KVM:
svm_set_x2apic_msr_interception is called to enable the interception of
the x2apic msrs.
In particular it is called at the moment the guest resets its apic.
Assuming that the guest's apic was in x2apic mode, the reset will bring
it back to the xapic mode.
The svm_set_x2apic_msr_interception however has an erroneous check for
'!apic_x2apic_mode()' which prevents it from doing anything in this case.
As a result of this, all x2apic msrs are left unintercepted, and that
exposes the bare metal x2apic (if enabled) to the guest.
Oops.
Remove the erroneous '!apic_x2apic_mode()' check to fix that.
This fixes CVE-2023-5090
Fixes: 4d1d7942e36a ("KVM: SVM: Introduce logic to (de)activate x2AVIC mode")
Cc: stable@vger.kernel.org
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230928173354.217464-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f9cdeb58a9cf46c09b56f5f661ea8da24b6458c3 ]
Dummy events are created with an attribute where the period and freq
are zero. evsel__config will then see the uninitialized values and
initialize them in evsel__default_freq_period. As fequency mode is
used by default the dummy event would be set to use frequency
mode. However, this has no effect on the dummy event but does cause
unnecessary timers/interrupts. Avoid this overhead by setting the
period to 1 for dummy events.
evlist__add_aux_dummy calls evlist__add_dummy then sets freq=0 and
period=1. This isn't necessary after this change and so the setting is
removed.
From Stephane:
The dummy event is not counting anything. It is used to collect mmap
records and avoid a race condition during the synthesize mmap phase of
perf record. As such, it should not cause any overhead during active
profiling. Yet, it did. Because of a bug the dummy event was
programmed as a sampling event in frequency mode. Events in that mode
incur more kernel overheads because on timer tick, the kernel has to
look at the number of samples for each event and potentially adjust
the sampling period to achieve the desired frequency. The dummy event
was therefore adding a frequency event to task and ctx contexts we may
otherwise not have any, e.g.,
perf record -a -e cpu/event=0x3c,period=10000000/.
On each timer tick the perf_adjust_freq_unthr_context() is invoked and
if ctx->nr_freq is non-zero, then the kernel will loop over ALL the
events of the context looking for frequency mode ones. In doing, so it
locks the context, and enable/disable the PMU of each hw event. If all
the events of the context are in period mode, the kernel will have to
traverse the list for nothing incurring overhead. The overhead is
multiplied by a very large factor when this happens in a guest kernel.
There is no need for the dummy event to be in frequency mode, it does
not count anything and therefore should not cause extra overhead for
no reason.
Fixes: 5bae0250237f ("perf evlist: Introduce perf_evlist__new_dummy constructor")
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230916035640.1074422-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc32464a5fe4946fe1a4d8f8e29961dc411933c5 ]
Use of dget() after we'd dropped ->d_lock is too late - dentry might
be gone by that point.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1939316bf988f3e49a07d9c4dd6f660bf4daa53d ]
->ki_pos value is unreliable in such cases. For an obvious example,
consider O_DSYNC write - we feed the data to page cache and start IO,
then we make sure it's completed. Update of ->ki_pos is dealt with
by the first part; failure in the second ends up with negative value
returned _and_ ->ki_pos left advanced as if sync had been successful.
In the same situation write(2) does not advance the file position
at all.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit daa9ada2093ed23d52b4c1fe6e13cf78f55cc85f ]
Erhard reported that his G5 was crashing with v6.6-rc kernels:
mpic: Setting up HT PICs workarounds for U3/U4
BUG: Unable to handle kernel data access at 0xfeffbb62ffec65fe
Faulting instruction address: 0xc00000000005dc40
Oops: Kernel access of bad area, sig: 11 [#1]
BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G T 6.6.0-rc3-PMacGS #1
Hardware name: PowerMac11,2 PPC970MP 0x440101 PowerMac
NIP: c00000000005dc40 LR: c000000000066660 CTR: c000000000007730
REGS: c0000000022bf510 TRAP: 0380 Tainted: G T (6.6.0-rc3-PMacGS)
MSR: 9000000000001032 <SF,HV,ME,IR,DR,RI> CR: 44004242 XER: 00000000
IRQMASK: 3
GPR00: 0000000000000000 c0000000022bf7b0 c0000000010c0b00 00000000000001ac
GPR04: 0000000003c80000 0000000000000300 c0000000f20001ae 0000000000000300
GPR08: 0000000000000006 feffbb62ffec65ff 0000000000000001 0000000000000000
GPR12: 9000000000001032 c000000002362000 c000000000f76b80 000000000349ecd8
GPR16: 0000000002367ba8 0000000002367f08 0000000000000006 0000000000000000
GPR20: 00000000000001ac c000000000f6f920 c0000000022cd985 000000000000000c
GPR24: 0000000000000300 00000003b0a3691d c0003e008030000e 0000000000000000
GPR28: c00000000000000c c0000000f20001ee feffbb62ffec65fe 00000000000001ac
NIP hash_page_do_lazy_icache+0x50/0x100
LR __hash_page_4K+0x420/0x590
Call Trace:
hash_page_mm+0x364/0x6f0
do_hash_fault+0x114/0x2b0
data_access_common_virt+0x198/0x1f0
--- interrupt: 300 at mpic_init+0x4bc/0x10c4
NIP: c000000002020a5c LR: c000000002020a04 CTR: 0000000000000000
REGS: c0000000022bf9f0 TRAP: 0300 Tainted: G T (6.6.0-rc3-PMacGS)
MSR: 9000000000001032 <SF,HV,ME,IR,DR,RI> CR: 24004248 XER: 00000000
DAR: c0003e008030000e DSISR: 40000000 IRQMASK: 1
...
NIP mpic_init+0x4bc/0x10c4
LR mpic_init+0x464/0x10c4
--- interrupt: 300
pmac_setup_one_mpic+0x258/0x2dc
pmac_pic_init+0x28c/0x3d8
init_IRQ+0x90/0x140
start_kernel+0x57c/0x78c
start_here_common+0x1c/0x20
A bisect pointed to the breakage beginning with commit 9fee28baa601 ("powerpc:
implement the new page table range API").
Analysis of the oops pointed to a struct page with a corrupted
compound_head being loaded via page_folio() -> _compound_head() in
hash_page_do_lazy_icache().
The access by the mpic code is to an MMIO address, so the expectation
is that the struct page for that address would be initialised by
init_unavailable_range(), as pointed out by Aneesh.
Instrumentation showed that was not the case, which eventually lead to
the realisation that pfn_valid() was returning false for that address,
causing the struct page to not be initialised.
Because the system is using FLATMEM, the version of pfn_valid() in
memory_model.h is used:
static inline int pfn_valid(unsigned long pfn)
{
...
return pfn >= pfn_offset && (pfn - pfn_offset) < max_mapnr;
}
Which relies on max_mapnr being initialised. Early in boot max_mapnr is
zero meaning no PFNs are valid.
max_mapnr is initialised in mem_init() called via:
start_kernel()
mm_core_init() # init/main.c:928
mem_init()
But that is too late for the usage in init_unavailable_range() called via:
start_kernel()
setup_arch() # init/main.c:893
paging_init()
free_area_init()
init_unavailable_range()
Although max_mapnr is currently set in mem_init(), the value is actually
already available much earlier, as soon as mem_topology_setup() has
completed, which is also before paging_init() is called. So move the
initialisation there, which causes paging_init() to correctly initialise
the struct page and fixes the bug.
This bug seems to have been lurking for years, but went unnoticed
because the pre-folio code was inspecting the uninitialised page->flags
but not dereferencing it.
Thanks to Erhard and Aneesh for help debugging.
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Closes: https://lore.kernel.org/all/20230929132750.3cd98452@yea/
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231023112500.1550208-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc65cc42af737a5a35f83842408ef2c6c79ba025 ]
If the adapter is unplugged while we're looping in r8153b_ups_en() /
r8153c_ups_en() we could end up looping for 10 seconds (20 ms * 500
loops). Add code similar to what's done in other places in the driver
to check for unplug and bail.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc90ba37a8c37042407fa6970b9830890cfe6047 ]
If the adapter is unplugged while we're looping in
rtl_phy_patch_request() we could end up looping for 10 seconds (2 ms *
5000 loops). Add code similar to what's done in other places in the
driver to check for unplug and bail.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f771493da935299c6393ad3563b581255d01a37 ]
t4_set_params_timeout() can return -EINVAL if failed, add check
for this.
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 316baf09d355aec1179981b6dfe28eba50c5ee5b ]
In amdgpu_dma_buf_move_notify reserve fences for the page table updates
in amdgpu_vm_clear_freed and amdgpu_vm_handle_moved. This fixes a BUG_ON
in dma_resv_add_fence when using SDMA for page table updates.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99c09c985e5973c8f0ad976ebae069548dd86f12 ]
This commit fixes the smatch static checker warning in function
mlxbf_tmfifo_rxtx_word() which complains data not initialized at
line 634 when IS_VRING_DROP() is TRUE.
Signed-off-by: Liming Sun <limings@nvidia.com>
Link: https://lore.kernel.org/r/20231012230235.219861-1-limings@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1baf0152f7707c6c7e4ea815dcc1f431c0e603f9 ]
When resetting multiple objects at once (via dump request), emit a log
message per table (or filled skb) and resurrect the 'entries' parameter
to contain the number of objects being logged for.
To test the skb exhaustion path, perform some bulk counter and quota
adds in the kselftest.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Acked-by: Paul Moore <paul@paul-moore.com> (Audit)
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 477a0ebec101359f49d92796e3b609857d564b52 ]
Replace kmap_atomic()/kunmap_atomic() calls with kmap_local_page()/
kunmap_local() in copy_user_highpage() which can be invoked from both
preemptible and atomic context [1].
[1] https://lore.kernel.org/all/20201029222652.302358281@linutronix.de/
Suggested-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa8391ad68c16716e2c06ada397e99ceed2fb647 ]
Eliminate DRM_SCHED_PRIORITY_UNSET, value of -2, whose only user was
amdgpu. Furthermore, eliminate an index bug, in that when amdgpu boots, it
calls drm_sched_entity_init() with DRM_SCHED_PRIORITY_UNSET, which uses it to
index sched->sched_rq[].
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alex Deucher <Alexander.Deucher@amd.com>
Link: https://lore.kernel.org/r/20231017035656.8211-2-luben.tuikov@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eab0261967aeab528db4d0a51806df8209aec179 ]
A context priority value of AMD_CTX_PRIORITY_UNSET is now invalid--instead of
carrying it around and passing it to the Direct Rendering Manager--and it
becomes AMD_CTX_PRIORITY_NORMAL in amdgpu_ctx_ioctl(), the gateway to context
creation.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alex Deucher <Alexander.Deucher@amd.com>
Link: https://lore.kernel.org/r/20231017035656.8211-1-luben.tuikov@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e40c04ade0e2f3916b78211d747317843b11ce10 ]
The driver should be deregistered as misc driver after PCI registration
failure.
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://lore.kernel.org/r/20231015114529.10725-1-thenzl@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1022e7e2f40574c74ed32c3811b03d26b0b81daf ]
Delete the v86d netlink only after all the VBE tasks have been
completed.
Fixes initial state restore on module unload:
uvesafb: VBE state restore call failed (eax=0x4f04, err=-19)
Signed-off-by: Jorge Maidana <jorgem.linux@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b401e30c249849d803de6c332dad2a595a58658 ]
With the current cleanup flow, we could trigger a NULL pointer
dereference if there is a delayed destruction of a BO with a
system resource that gets executed on drain_workqueue() call,
as we attempt to free a resource using an already released
resource manager.
Remove the device from the device list and drain its workqueue
before releasing the system domain manager in ttm_device_fini().
Signed-off-by: Karolina Stolarek <karolina.stolarek@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231016121525.2237838-1-karolina.stolarek@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f88dfbf333b3661faff996bb03af2024d907b76a ]
The RT5650 should enable a power setting for button detection to avoid the wrong result.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20231013094525.715518-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d3ad1917996839a5042d18f04e41915cfa1b74a ]
In the previous code, there was a memory leak issue where the
previously allocated memory was not freed upon a failed krealloc
operation. This patch addresses the problem by releasing the old memory
before setting the pointer to NULL in case of a krealloc failure. This
ensures that memory is properly managed and avoids potential memory
leaks.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
