232697ab9d
309 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Matthew Wilcox (Oracle)
|
1d024e7a8d |
mm: remove enum page_entry_size
Remove the unnecessary encoding of page order into an enum and pass the page order directly. That lets us get rid of pe_order(). The switch constructs have to be changed to if/else constructs to prevent GCC from warning on builds with 3-level page tables where PMD_ORDER and PUD_ORDER have the same value. If you are looking at this commit because your driver stopped compiling, look at the previous commit as well and audit your driver to be sure it doesn't depend on mmap_lock being held in its ->huge_fault method. [willy@infradead.org: use "order %u" to match the (non dev_t) style] Link: https://lkml.kernel.org/r/ZOUYekbtTv+n8hYf@casper.infradead.org Link: https://lkml.kernel.org/r/20230818202335.2739663-4-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Miaohe Lin
|
bded67f81e |
memory tier: rename destroy_memory_type() to put_memory_type()
It appears that destroy_memory_type() isn't a very good name because we usually will not free the memory_type here. So rename it to a more appropriate name i.e. put_memory_type(). Link: https://lkml.kernel.org/r/20230706063905.543800-1-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Suggested-by: Huang, Ying <ying.huang@intel.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Xiao Yang <yangx.jy@fujitsu.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Jane Chu
|
1ea7ca1b09 |
dax: enable dax fault handler to report VM_FAULT_HWPOISON
When multiple processes mmap() a dax file, then at some point, a process issues a 'load' and consumes a hwpoison, the process receives a SIGBUS with si_code = BUS_MCEERR_AR and with si_lsb set for the poison scope. Soon after, any other process issues a 'load' to the poisoned page (that is unmapped from the kernel side by memory_failure), it receives a SIGBUS with si_code = BUS_ADRERR and without valid si_lsb. This is confusing to user, and is different from page fault due to poison in RAM memory, also some helpful information is lost. Channel dax backend driver's poison detection to the filesystem such that instead of reporting VM_FAULT_SIGBUS, it could report VM_FAULT_HWPOISON. If user level block IO syscalls fail due to poison, the errno will be converted to EIO to maintain block API consistency. Signed-off-by: Jane Chu <jane.chu@oracle.com> Link: https://lore.kernel.org/r/20230615181325.1327259-2-jane.chu@oracle.com Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> |
||
Tarun Sahu
|
46e66dab85 |
dax/kmem: Pass valid argument to memory_group_register_static
memory_group_register_static takes maximum number of pages as the argument
while dev_dax_kmem_probe passes total_len (in bytes) as the argument.
IIUC, I don't see any crash/panic impact as such. As,
memory_group_register_static just set the max_pages limit which is used in
auto_movable_zone_for_pfn to determine the zone.
which might cause these condition to behave differently,
This will be true always so jump will happen to kernel_zone
...
if (!auto_movable_can_online_movable(NUMA_NO_NODE, group, nr_pages))
goto kernel_zone;
...
kernel_zone:
return default_kernel_zone_for_pfn(nid, pfn, nr_pages);
Here, In below, zone_intersects compare range will be larger as nr_pages
will be higher (derived from total_len passed in dev_dax_kmem_probe).
...
static struct zone *default_kernel_zone_for_pfn(int nid, unsigned long start_pfn,
unsigned long nr_pages)
{
struct pglist_data *pgdat = NODE_DATA(nid);
int zid;
for (zid = 0; zid < ZONE_NORMAL; zid++) {
struct zone *zone = &pgdat->node_zones[zid];
if (zone_intersects(zone, start_pfn, nr_pages))
return zone;
}
return &pgdat->node_zones[ZONE_NORMAL];
}
Incorrect zone will be returned here, which in later time might cause bigger
problem.
Fixes:
|
||
Dan Williams
|
2532f41607 |
dax: Cleanup extra dax_region references
Now that free_dev_dax_id() internally manages the references it needs the extra references taken by the dax_region drivers are not needed. Reported-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/168577285161.1672036.8111253437794419696.stgit@dwillia2-xfh.jf.intel.com Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> |
||
|
Dan Williams
|
70aab281e1 |
dax: Introduce alloc_dev_dax_id()
The reference counting of dax_region objects is needlessly complicated,
has lead to confusion [1], and has hidden a bug [2]. Towards cleaning up
that mess introduce alloc_dev_dax_id() to minimize the holding of a
dax_region reference to only what dev_dax_release() needs, the
dax_region->ida.
Part of the reason for the mess was the design to dereference a
dax_region in all cases in free_dev_dax_id() even if the id was
statically assigned by the upper level dax_region driver. Remove the
need to call "is_static(dax_region)" by tracking whether the id is
dynamic directly in the dev_dax instance itself.
With that flag the dax_region pinning and release per dev_dax instance
can move to alloc_dev_dax_id() and free_dev_dax_id() respectively.
A follow-on cleanup address the unnecessary references in the dax_region
setup and drivers.
Fixes:
|
||
|
Dan Williams
|
82b4ceeccb |
dax: Use device_unregister() in unregister_dax_mapping()
Replace an open-coded device_unregister() sequence with the helper. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/168577283989.1672036.7777592498865470652.stgit@dwillia2-xfh.jf.intel.com Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> |
||
|
Dan Williams
|
6d24b170a9 |
dax: Fix dax_mapping_release() use after free
A CONFIG_DEBUG_KOBJECT_RELEASE test of removing a device-dax region
provider (like modprobe -r dax_hmem) yields:
kobject: 'mapping0' (ffff93eb460e8800): kobject_release, parent 0000000000000000 (delayed 2000)
[..]
DEBUG_LOCKS_WARN_ON(1)
WARNING: CPU: 23 PID: 282 at kernel/locking/lockdep.c:232 __lock_acquire+0x9fc/0x2260
[..]
RIP: 0010:__lock_acquire+0x9fc/0x2260
[..]
Call Trace:
<TASK>
[..]
lock_acquire+0xd4/0x2c0
? ida_free+0x62/0x130
_raw_spin_lock_irqsave+0x47/0x70
? ida_free+0x62/0x130
ida_free+0x62/0x130
dax_mapping_release+0x1f/0x30
device_release+0x36/0x90
kobject_delayed_cleanup+0x46/0x150
Due to attempting ida_free() on an ida object that has already been
freed. Devices typically only hold a reference on their parent while
registered. If a child needs a parent object to complete its release it
needs to hold a reference that it drops from its release callback.
Arrange for a dax_mapping to pin its parent dev_dax instance until
dax_mapping_release().
Fixes:
|
||
Arnd Bergmann
|
2d5153526f |
dax: fix missing-prototype warnings
dev_dax_probe declaration for this function was removed with the only
caller outside of device.c. Mark it static to avoid a W=1
warning:
drivers/dax/device.c:399:5: error: no previous prototype for 'dev_dax_probe'
Similarly, run_dax() causes a warning, but this one is because the
declaration needs to be included:
drivers/dax/super.c:337:6: error: no previous prototype for 'run_dax'
Fixes:
|
||
Linus Torvalds
|
7c3dc440b1 |
cxl for v6.3
- CXL RAM region enumeration: instantiate 'struct cxl_region' objects
for platform firmware created memory regions
- CXL RAM region provisioning: complement the existing PMEM region
creation support with RAM region support
- "Soft Reservation" policy change: Online (memory hot-add)
soft-reserved memory (EFI_MEMORY_SP) by default, but still allow for
setting aside such memory for dedicated access via device-dax.
- CXL Events and Interrupts: Takeover CXL event handling from
platform-firmware (ACPI calls this CXL Memory Error Reporting) and
export CXL Events via Linux Trace Events.
- Convey CXL _OSC results to drivers: Similar to PCI, let the CXL
subsystem interrogate the result of CXL _OSC negotiation.
- Emulate CXL DVSEC Range Registers as "decoders": Allow for
first-generation devices that pre-date the definition of the CXL HDM
Decoder Capability to translate the CXL DVSEC Range Registers into
'struct cxl_decoder' objects.
- Set timestamp: Per spec, set the device timestamp in case of hotplug,
or if platform-firwmare failed to set it.
- General fixups: linux-next build issues, non-urgent fixes for
pre-production hardware, unit test fixes, spelling and debug message
improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCY/WYcgAKCRDfioYZHlFs
Z6m3APkBUtiEEm1o8ikdu5llUS1OTLBwqjJDwGMTyf8X/WDXhgD+J2mLsCgARS7X
5IS0RAtefutrW5sQpUucPM7QiLuraAY=
=kOXC
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) updates from Dan Williams:
"To date Linux has been dependent on platform-firmware to map CXL RAM
regions and handle events / errors from devices. With this update we
can now parse / update the CXL memory layout, and report events /
errors from devices. This is a precursor for the CXL subsystem to
handle the end-to-end "RAS" flow for CXL memory. i.e. the flow that
for DDR-attached-DRAM is handled by the EDAC driver where it maps
system physical address events to a field-replaceable-unit (FRU /
endpoint device). In general, CXL has the potential to standardize
what has historically been a pile of memory-controller-specific error
handling logic.
Another change of note is the default policy for handling RAM-backed
device-dax instances. Previously the default access mode was "device",
mmap(2) a device special file to access memory. The new default is
"kmem" where the address range is assigned to the core-mm via
add_memory_driver_managed(). This saves typical users from wondering
why their platform memory is not visible via free(1) and stuck behind
a device-file. At the same time it allows expert users to deploy
policy to, for example, get dedicated access to high performance
memory, or hide low performance memory from general purpose kernel
allocations. This affects not only CXL, but also systems with
high-bandwidth-memory that platform-firmware tags with the
EFI_MEMORY_SP (special purpose) designation.
Summary:
- CXL RAM region enumeration: instantiate 'struct cxl_region' objects
for platform firmware created memory regions
- CXL RAM region provisioning: complement the existing PMEM region
creation support with RAM region support
- "Soft Reservation" policy change: Online (memory hot-add)
soft-reserved memory (EFI_MEMORY_SP) by default, but still allow
for setting aside such memory for dedicated access via device-dax.
- CXL Events and Interrupts: Takeover CXL event handling from
platform-firmware (ACPI calls this CXL Memory Error Reporting) and
export CXL Events via Linux Trace Events.
- Convey CXL _OSC results to drivers: Similar to PCI, let the CXL
subsystem interrogate the result of CXL _OSC negotiation.
- Emulate CXL DVSEC Range Registers as "decoders": Allow for
first-generation devices that pre-date the definition of the CXL
HDM Decoder Capability to translate the CXL DVSEC Range Registers
into 'struct cxl_decoder' objects.
- Set timestamp: Per spec, set the device timestamp in case of
hotplug, or if platform-firwmare failed to set it.
- General fixups: linux-next build issues, non-urgent fixes for
pre-production hardware, unit test fixes, spelling and debug
message improvements"
* tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (66 commits)
dax/kmem: Fix leak of memory-hotplug resources
cxl/mem: Add kdoc param for event log driver state
cxl/trace: Add serial number to trace points
cxl/trace: Add host output to trace points
cxl/trace: Standardize device information output
cxl/pci: Remove locked check for dvsec_range_allowed()
cxl/hdm: Add emulation when HDM decoders are not committed
cxl/hdm: Create emulated cxl_hdm for devices that do not have HDM decoders
cxl/hdm: Emulate HDM decoder from DVSEC range registers
cxl/pci: Refactor cxl_hdm_decode_init()
cxl/port: Export cxl_dvsec_rr_decode() to cxl_port
cxl/pci: Break out range register decoding from cxl_hdm_decode_init()
cxl: add RAS status unmasking for CXL
cxl: remove unnecessary calling of pci_enable_pcie_error_reporting()
dax/hmem: build hmem device support as module if possible
dax: cxl: add CXL_REGION dependency
cxl: avoid returning uninitialized error code
cxl/pmem: Fix nvdimm registration races
cxl/mem: Fix UAPI command comment
cxl/uapi: Tag commands from cxl_query_cmd()
...
|
||
|
Linus Torvalds
|
a93e884edf |
Driver core changes for 6.3-rc1
Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work falls
into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be moved
into read-only memory (i.e. const) The recent work with Rust has
pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only making
things safer overall. This is the contuation of that work (started
last release with kobject changes) in moving struct bus_type to be
constant. We didn't quite make it for this release, but the
remaining patches will be finished up for the release after this
one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/ipdg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynL3gCgwzbcWu0So3piZyLiJKxsVo9C2EsAn3sZ9gN6
6oeFOjD3JDju3cQsfGgd
=Su6W
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work
falls into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be
moved into read-only memory (i.e. const) The recent work with Rust
has pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only
making things safer overall. This is the contuation of that work
(started last release with kobject changes) in moving struct
bus_type to be constant. We didn't quite make it for this release,
but the remaining patches will be finished up for the release after
this one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems"
[ Geert Uytterhoeven points out that that last sentence isn't true, and
that there's a pending report that has a fix that is queued up - Linus ]
* tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits)
debugfs: drop inline constant formatting for ERR_PTR(-ERROR)
OPP: fix error checking in opp_migrate_dentry()
debugfs: update comment of debugfs_rename()
i3c: fix device.h kernel-doc warnings
dma-mapping: no need to pass a bus_type into get_arch_dma_ops()
driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place
Revert "driver core: add error handling for devtmpfs_create_node()"
Revert "devtmpfs: add debug info to handle()"
Revert "devtmpfs: remove return value of devtmpfs_delete_node()"
driver core: cpu: don't hand-override the uevent bus_type callback.
devtmpfs: remove return value of devtmpfs_delete_node()
devtmpfs: add debug info to handle()
driver core: add error handling for devtmpfs_create_node()
driver core: bus: update my copyright notice
driver core: bus: add bus_get_dev_root() function
driver core: bus: constify bus_unregister()
driver core: bus: constify some internal functions
driver core: bus: constify bus_get_kset()
driver core: bus: constify bus_register/unregister_notifier()
driver core: remove private pointer from struct bus_type
...
|
||
|
Linus Torvalds
|
3822a7c409 |
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()") which
does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter". These filters provide users
with finer-grained control over DAMOS's actions. SeongJae has also done
some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series "mm:
support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap
PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with his
series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings. The previous BPF-based approach had
shortcomings. See "mm: In-kernel support for memory-deny-write-execute
(MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a per-node
basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage during
compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in ths
series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's series
"mm, arch: add generic implementation of pfn_valid() for FLATMEM" and
"fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest of
the kernel in the series "Simplify the external interface for GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the series
"mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY/PoPQAKCRDdBJ7gKXxA
jlvpAPsFECUBBl20qSue2zCYWnHC7Yk4q9ytTkPB/MMDrFEN9wD/SNKEm2UoK6/K
DmxHkn0LAitGgJRS/W9w81yrgig9tAQ=
=MlGs
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
|
||
|
Linus Torvalds
|
8cc01d43f8 |
RCU pull request for v6.3
This pull request contains the following branches:
doc.2023.01.05a: Documentation updates.
fixes.2023.01.23a: Miscellaneous fixes, perhaps most notably:
o Throttling callback invocation based on the number of callbacks
that are now ready to invoke instead of on the total number
of callbacks.
o Several patches that suppress false-positive boot-time
diagnostics, for example, due to lockdep not yet being
initialized.
o Make expedited RCU CPU stall warnings dump stacks of any tasks
that are blocking the stalled grace period. (Normal RCU CPU
stall warnings have doen this for mnay years.)
o Lazy-callback fixes to avoid delays during boot, suspend, and
resume. (Note that lazy callbacks must be explicitly enabled,
so this should not (yet) affect production use cases.)
kvfree.2023.01.03a: Cause kfree_rcu() and friends to take advantage of
polled grace periods, thus reducing memory footprint by almost
two orders of magnitude, admittedly on a microbenchmark.
This series also begins the transition from kfree_rcu(p) to
kfree_rcu_mightsleep(p). This transition was motivated by bugs
where kfree_rcu(p), which can block, was typed instead of the
intended kfree_rcu(p, rh).
srcu.2023.01.03a: SRCU updates, perhaps most notably fixing a bug that
causes SRCU to fail when booted on a system with a non-zero boot
CPU. This surprising situation actually happens for kdump kernels
on the powerpc architecture. It also adds an srcu_down_read()
and srcu_up_read(), which act like srcu_read_lock() and
srcu_read_unlock(), but allow an SRCU read-side critical section
to be handed off from one task to another.
srcu-always.2023.02.02a: Cleans up the now-useless SRCU Kconfig option.
There are a few more commits that are not yet acked or pulled
into maintainer trees, and these will be in a pull request for
a later merge window.
tasks.2023.01.03a: RCU-tasks updates, perhaps most notably these fixes:
o A strange interaction between PID-namespace unshare and the
RCU-tasks grace period that results in a low-probability but
very real hang.
o A race between an RCU tasks rude grace period on a single-CPU
system and CPU-hotplug addition of the second CPU that can result
in a too-short grace period.
o A race between shrinking RCU tasks down to a single callback list
and queuing a new callback to some other CPU, but where that
queuing is delayed for more than an RCU grace period. This can
result in that callback being stranded on the non-boot CPU.
torture.2023.01.05a: Torture-test updates and fixes.
torturescript.2023.01.03a: Torture-test scripting updates and fixes.
stall.2023.01.09a: Provide additional RCU CPU stall-warning information
in kernels built with CONFIG_RCU_CPU_STALL_CPUTIME=y, and
restore the full five-minute timeout limit for expedited RCU
CPU stall warnings.
-----BEGIN PGP SIGNATURE-----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=bBYK
-----END PGP SIGNATURE-----
Merge tag 'rcu.2023.02.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Documentation updates
- Miscellaneous fixes, perhaps most notably:
- Throttling callback invocation based on the number of callbacks
that are now ready to invoke instead of on the total number of
callbacks
- Several patches that suppress false-positive boot-time
diagnostics, for example, due to lockdep not yet being
initialized
- Make expedited RCU CPU stall warnings dump stacks of any tasks
that are blocking the stalled grace period. (Normal RCU CPU
stall warnings have done this for many years)
- Lazy-callback fixes to avoid delays during boot, suspend, and
resume. (Note that lazy callbacks must be explicitly enabled, so
this should not (yet) affect production use cases)
- Make kfree_rcu() and friends take advantage of polled grace periods,
thus reducing memory footprint by almost two orders of magnitude,
admittedly on a microbenchmark
This also begins the transition from kfree_rcu(p) to
kfree_rcu_mightsleep(p). This transition was motivated by bugs where
kfree_rcu(p), which can block, was typed instead of the intended
kfree_rcu(p, rh)
- SRCU updates, perhaps most notably fixing a bug that causes SRCU to
fail when booted on a system with a non-zero boot CPU. This
surprising situation actually happens for kdump kernels on the
powerpc architecture
This also adds an srcu_down_read() and srcu_up_read(), which act like
srcu_read_lock() and srcu_read_unlock(), but allow an SRCU read-side
critical section to be handed off from one task to another
- Clean up the now-useless SRCU Kconfig option
There are a few more commits that are not yet acked or pulled into
maintainer trees, and these will be in a pull request for a later
merge window
- RCU-tasks updates, perhaps most notably these fixes:
- A strange interaction between PID-namespace unshare and the
RCU-tasks grace period that results in a low-probability but
very real hang
- A race between an RCU tasks rude grace period on a single-CPU
system and CPU-hotplug addition of the second CPU that can
result in a too-short grace period
- A race between shrinking RCU tasks down to a single callback
list and queuing a new callback to some other CPU, but where
that queuing is delayed for more than an RCU grace period. This
can result in that callback being stranded on the non-boot CPU
- Torture-test updates and fixes
- Torture-test scripting updates and fixes
- Provide additional RCU CPU stall-warning information in kernels built
with CONFIG_RCU_CPU_STALL_CPUTIME=y, and restore the full five-minute
timeout limit for expedited RCU CPU stall warnings
* tag 'rcu.2023.02.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (80 commits)
rcu/kvfree: Add kvfree_rcu_mightsleep() and kfree_rcu_mightsleep()
kernel/notifier: Remove CONFIG_SRCU
init: Remove "select SRCU"
fs/quota: Remove "select SRCU"
fs/notify: Remove "select SRCU"
fs/btrfs: Remove "select SRCU"
fs: Remove CONFIG_SRCU
drivers/pci/controller: Remove "select SRCU"
drivers/net: Remove "select SRCU"
drivers/md: Remove "select SRCU"
drivers/hwtracing/stm: Remove "select SRCU"
drivers/dax: Remove "select SRCU"
drivers/base: Remove CONFIG_SRCU
rcu: Disable laziness if lazy-tracking says so
rcu: Track laziness during boot and suspend
rcu: Remove redundant call to rcu_boost_kthread_setaffinity()
rcu: Allow up to five minutes expedited RCU CPU stall-warning timeouts
rcu: Align the output of RCU CPU stall warning messages
rcu: Add RCU stall diagnosis information
sched: Add helper nr_context_switches_cpu()
...
|
||
|
Dan Williams
|
e686c32590 |
dax/kmem: Fix leak of memory-hotplug resources
While experimenting with CXL region removal the following corruption of
/proc/iomem appeared.
Before:
f010000000-f04fffffff : CXL Window 0
f010000000-f02fffffff : region4
f010000000-f02fffffff : dax4.0
f010000000-f02fffffff : System RAM (kmem)
After (modprobe -r cxl_test):
f010000000-f02fffffff : **redacted binary garbage**
f010000000-f02fffffff : System RAM (kmem)
...and testing further the same is visible with persistent memory
assigned to kmem:
Before:
480000000-243fffffff : Persistent Memory
480000000-57e1fffff : namespace3.0
580000000-243fffffff : dax3.0
580000000-243fffffff : System RAM (kmem)
After (ndctl disable-region all):
480000000-243fffffff : Persistent Memory
580000000-243fffffff : ***redacted binary garbage***
580000000-243fffffff : System RAM (kmem)
The corrupted data is from a use-after-free of the "dax4.0" and "dax3.0"
resources, and it also shows that the "System RAM (kmem)" resource is
not being removed. The bug does not appear after "modprobe -r kmem", it
requires the parent of "dax4.0" and "dax3.0" to be removed which
re-parents the leaked "System RAM (kmem)" instances. Those in turn
reference the freed resource as a parent.
First up for the fix is release_mem_region_adjustable() needs to
reliably delete the resource inserted by add_memory_driver_managed().
That is thwarted by a check for IORESOURCE_SYSRAM that predates the
dax/kmem driver, from commit:
|
||
|
Arnd Bergmann
|
0c16c83ed5 |
dax: cxl: add CXL_REGION dependency
There is already a dependency on CXL_REGION, which depends on CXL_BUS,
but since CXL_REGION is a 'bool' symbol, it's possible to configure
DAX as built-in even though CXL itself is a loadable module:
x86_64-linux-ld: drivers/dax/cxl.o: in function `cxl_dax_region_probe':
cxl.c:(.text+0xb): undefined reference to `to_cxl_dax_region'
x86_64-linux-ld: drivers/dax/cxl.o: in function `cxl_dax_region_driver_init':
cxl.c:(.init.text+0x10): undefined reference to `__cxl_driver_register'
x86_64-linux-ld: drivers/dax/cxl.o: in function `cxl_dax_region_driver_exit':
cxl.c:(.exit.text+0x9): undefined reference to `cxl_driver_unregister'
Prevent this with another depndency on the tristate symbol.
Fixes:
|
||
|
Dan Williams
|
09d09e04d2 |
cxl/dax: Create dax devices for CXL RAM regions
While platform firmware takes some responsibility for mapping the RAM capacity of CXL devices present at boot, the OS is responsible for mapping the remainder and hot-added devices. Platform firmware is also responsible for identifying the platform general purpose memory pool, typically DDR attached DRAM, and arranging for the remainder to be 'Soft Reserved'. That reservation allows the CXL subsystem to route the memory to core-mm via memory-hotplug (dax_kmem), or leave it for dedicated access (device-dax). The new 'struct cxl_dax_region' object allows for a CXL memory resource (region) to be published, but also allow for udev and module policy to act on that event. It also prevents cxl_core.ko from having a module loading dependency on any drivers/dax/ modules. Tested-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/167602003896.1924368.10335442077318970468.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
|
Dan Williams
|
e9ee9fe3a9 |
dax: Assign RAM regions to memory-hotplug by default
The default mode for device-dax instances is backwards for RAM-regions as evidenced by the fact that it tends to catch end users by surprise. "Where is my memory?". Recall that platforms are increasingly shipping with performance-differentiated memory pools beyond typical DRAM and NUMA effects. This includes HBM (high-bandwidth-memory) and CXL (dynamic interleave, varied media types, and future fabric attached possibilities). For this reason the EFI_MEMORY_SP (EFI Special Purpose Memory => Linux 'Soft Reserved') attribute is expected to be applied to all memory-pools that are not the general purpose pool. This designation gives an Operating System a chance to defer usage of a memory pool until later in the boot process where its performance properties can be interrogated and administrator policy can be applied. 'Soft Reserved' memory can be anything from too limited and precious to be part of the general purpose pool (HBM), too slow to host hot kernel data structures (some PMEM media), or anything in between. However, in the absence of an explicit policy, the memory should at least be made usable by default. The current device-dax default hides all non-general-purpose memory behind a device interface. The expectation is that the distribution of users that want the memory online by default vs device-dedicated-access by default follows the Pareto principle. A small number of enlightened users may want to do userspace memory management through a device, but general users just want the kernel to make the memory available with an option to get more advanced later. Arrange for all device-dax instances not backed by PMEM to default to attaching to the dax_kmem driver. From there the baseline memory hotplug policy (CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE / memhp_default_state=) gates whether the memory comes online or stays offline. Where, if it stays offline, it can be reliably converted back to device-mode where it can be partitioned, or fronted by a userspace allocator. So, if someone wants device-dax instances for their 'Soft Reserved' memory: 1/ Build a kernel with CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=n or boot with memhp_default_state=offline, or roll the dice and hope that the kernel has not pinned a page in that memory before step 2. 2/ Write a udev rule to convert the target dax device(s) from 'system-ram' mode to 'devdax' mode: daxctl reconfigure-device $dax -m devdax -f Cc: Michal Hocko <mhocko@suse.com> Cc: David Hildenbrand <david@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Gregory Price <gregory.price@memverge.com> Tested-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/167602003336.1924368.6809503401422267885.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
|
Dan Williams
|
7dab174e2e |
dax/hmem: Move hmem device registration to dax_hmem.ko
In preparation for the CXL region driver to take over the responsibility of registering device-dax instances for CXL regions, move the registration of "hmem" devices to dax_hmem.ko. Previously the builtin component of this enabling (drivers/dax/hmem/device.o) would register platform devices for each address range and trigger the dax_hmem.ko module to load and attach device-dax instances to those devices. Now, the ranges are collected from the HMAT and EFI memory map walking, but the device creation is deferred. A new "hmem_platform" device is created which triggers dax_hmem.ko to load and register the platform devices. Tested-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/167602002771.1924368.5653558226424530127.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
|
Dan Williams
|
fe098574a9 |
dax/hmem: Convey the dax range via memregion_info()
In preparation for hmem platform devices to be unregistered, stop using platform_device_add_resources() to convey the address range. The platform_device_add_resources() API causes an existing "Soft Reserved" iomem resource to be re-parented under an inserted platform device resource. When that platform device is deleted it removes the platform device resource and all children. Instead, it is sufficient to convey just the address range and let request_mem_region() insert resources to indicate the devices active in the range. This allows the "Soft Reserved" resource to be re-enumerated upon the next probe event. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Tested-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/167602002217.1924368.7036275892522551624.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
|
Dan Williams
|
84fe17f8e9 |
dax/hmem: Drop unnecessary dax_hmem_remove()
Empty driver remove callbacks can just be elided. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Gregory Price <gregory.price@memverge.com> Tested-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/167602001664.1924368.9102029637928071240.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
|
Dan Williams
|
df2798bc77 |
dax/hmem: Move HMAT and Soft reservation probe initcall level
In preparation for moving more filtering of "hmem" ranges into the dax_hmem.ko module, update the initcall levels. HMAT range registration moves to subsys_initcall() to be done before Soft Reservation probing, and Soft Reservation probing is moved to device_initcall() to be done before dax_hmem.ko initialization if it is built-in. Tested-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/167602001107.1924368.11562316181038595611.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
Suren Baghdasaryan
|
1c71222e5f |
mm: replace vma->vm_flags direct modifications with modifier calls
Replace direct modifications to vma->vm_flags with calls to modifier functions to be able to track flag changes and to keep vma locking correctness. [akpm@linux-foundation.org: fix drivers/misc/open-dice.c, per Hyeonggon Yoo] Link: https://lkml.kernel.org/r/20230126193752.297968-5-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjun Roy <arjunroy@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Minchan Kim <minchan@google.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Oskolkov <posk@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Punit Agrawal <punit.agrawal@bytedance.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Song Liu <songliubraving@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Paul E. McKenney
|
a870acc112 |
drivers/dax: Remove "select SRCU"
Now that the SRCU Kconfig option is unconditionally selected, there is no longer any point in selecting it. Therefore, remove the "select SRCU" Kconfig statements. Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: <nvdimm@lists.linux.dev> Acked-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: John Ogness <john.ogness@linutronix.de> |
||
Greg Kroah-Hartman
|
2a81ada32f |
driver core: make struct bus_type.uevent() take a const *
The uevent() callback in struct bus_type should not be modifying the device that is passed into it, so mark it as a const * and propagate the function signature changes out into all relevant subsystems that use this callback. Acked-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230111113018.459199-16-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Randy Dunlap
|
1c88b9ba6b |
dax: super.c: fix kernel-doc bad line warning
Convert an empty line to " *" to avoid a kernel-doc warning: drivers/dax/super.c:478: warning: bad line: Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: nvdimm@lists.linux.dev Link: https://lore.kernel.org/r/20230117070249.31934-1-rdunlap@infradead.org Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
|
Dan Williams
|
472faf72b3 |
device-dax: Fix duplicate 'hmem' device registration
So called "soft-reserved" memory is an EFI conventional memory range with the EFI_MEMORY_SP attribute set. That attribute indicates that the memory is not part of the platform general purpose memory pool and may want some consideration from the system administrator about whether to keep that memory set aside for dedicated access through device-dax (map a device file), or assigned to the page allocator as another general purpose memory node target. Absent an ACPI HMAT table the default device-dax registration creates coarse grained devices that are delineated by EFI Memory Map entries. With the HMAT the devices are delineated by the finer grained ranges associated with the proximity domain of the memory target. I.e. the HMAT describes the properties of performance differentiated memory and each unique performance description results in a unique target proximity domain where each memory proximity domain has an associated SRAT entry that delineates the address range. The intent was that SRAT-defined device-dax instances are registered first. Then any left-over address range with the EFI_MEMORY_SP attribute, but not covered by the SRAT, would have a coarse grained device-dax instance established. However, the scheme to detect what ranges are left to be assigned to a device was buggy and resulted in multiple overlapping device-dax instances. Fix this by using explicit tracking for which ranges have been handled. Now, this new approach may leave memory stranded in the presence of broken platform firmware that fails to fully describe all EFI_MEMORY_SP ranges in the HMAT. That requires a deeper fix if it becomes a problem in practice. Reported-by: "Tallam Mahendra Kumar" <tallam.mahendra.kumar@intel.com> Reported-by: Mustafa Hajeer <mustafa.hajeer@intel.com> Debugged-by: Vishal Verma <vishal.l.verma@intel.com> Tested-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/166890823379.4183293.15333502171004313377.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
|
Linus Torvalds
|
19d17ab7c6 |
libnvdimm for 6.1
- Fix nvdimm namespace creation on platforms that do not publish
associated 'DIMM' metadata for a persistent memory region.
- Miscellaneous fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCY0nx4QAKCRDfioYZHlFs
Zwg3AQD6t9gvqu7AV1eTEGrypC3C47Z5yeeEqLC7U9DjtnxP9wD/VWGNX7uYu6Ck
rf8vyT7NFqg0khpU6XeaaDWQtasRggs=
=WCrX
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull nvdimm updates from Dan Williams:
"Some small cleanups and fixes in and around the nvdimm subsystem. The
most significant change is a regression fix for nvdimm namespace
(volume) creation when the namespace size is smaller than 2MB/
Summary:
- Fix nvdimm namespace creation on platforms that do not publish
associated 'DIMM' metadata for a persistent memory region.
- Miscellaneous fixes and cleanups"
* tag 'libnvdimm-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
ACPI: HMAT: Release platform device in case of platform_device_add_data() fails
dax: Remove usage of the deprecated ida_simple_xxx API
libnvdimm/region: Allow setting align attribute on regions without mappings
nvdimm/namespace: Fix comment typo
nvdimm: make __nvdimm_security_overwrite_query static
nvdimm/region: Fix kernel-doc
nvdimm/namespace: drop unneeded temporary variable in size_store()
nvdimm/namespace: return uuid_null only once in nd_dev_to_uuid()
|
||
|
Linus Torvalds
|
27bc50fc90 |
- Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
linux-next for a couple of months without, to my knowledge, any negative reports (or any positive ones, come to that). - Also the Maple Tree from Liam R. Howlett. An overlapping range-based tree for vmas. It it apparently slight more efficient in its own right, but is mainly targeted at enabling work to reduce mmap_lock contention. Liam has identified a number of other tree users in the kernel which could be beneficially onverted to mapletrees. Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat (https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com). This has yet to be addressed due to Liam's unfortunately timed vacation. He is now back and we'll get this fixed up. - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses clang-generated instrumentation to detect used-unintialized bugs down to the single bit level. KMSAN keeps finding bugs. New ones, as well as the legacy ones. - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of memory into THPs. - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support file/shmem-backed pages. - userfaultfd updates from Axel Rasmussen - zsmalloc cleanups from Alexey Romanov - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure - Huang Ying adds enhancements to NUMA balancing memory tiering mode's page promotion, with a new way of detecting hot pages. - memcg updates from Shakeel Butt: charging optimizations and reduced memory consumption. - memcg cleanups from Kairui Song. - memcg fixes and cleanups from Johannes Weiner. - Vishal Moola provides more folio conversions - Zhang Yi removed ll_rw_block() :( - migration enhancements from Peter Xu - migration error-path bugfixes from Huang Ying - Aneesh Kumar added ability for a device driver to alter the memory tiering promotion paths. For optimizations by PMEM drivers, DRM drivers, etc. - vma merging improvements from Jakub Matěn. - NUMA hinting cleanups from David Hildenbrand. - xu xin added aditional userspace visibility into KSM merging activity. - THP & KSM code consolidation from Qi Zheng. - more folio work from Matthew Wilcox. - KASAN updates from Andrey Konovalov. - DAMON cleanups from Kaixu Xia. - DAMON work from SeongJae Park: fixes, cleanups. - hugetlb sysfs cleanups from Muchun Song. - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY0HaPgAKCRDdBJ7gKXxA joPjAQDZ5LlRCMWZ1oxLP2NOTp6nm63q9PWcGnmY50FjD/dNlwEAnx7OejCLWGWf bbTuk6U2+TKgJa4X7+pbbejeoqnt5QU= =xfWx -----END PGP SIGNATURE----- Merge tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Yu Zhao's Multi-Gen LRU patches are here. They've been under test in linux-next for a couple of months without, to my knowledge, any negative reports (or any positive ones, come to that). - Also the Maple Tree from Liam Howlett. An overlapping range-based tree for vmas. It it apparently slightly more efficient in its own right, but is mainly targeted at enabling work to reduce mmap_lock contention. Liam has identified a number of other tree users in the kernel which could be beneficially onverted to mapletrees. Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat at [1]. This has yet to be addressed due to Liam's unfortunately timed vacation. He is now back and we'll get this fixed up. - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses clang-generated instrumentation to detect used-unintialized bugs down to the single bit level. KMSAN keeps finding bugs. New ones, as well as the legacy ones. - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of memory into THPs. - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support file/shmem-backed pages. - userfaultfd updates from Axel Rasmussen - zsmalloc cleanups from Alexey Romanov - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure - Huang Ying adds enhancements to NUMA balancing memory tiering mode's page promotion, with a new way of detecting hot pages. - memcg updates from Shakeel Butt: charging optimizations and reduced memory consumption. - memcg cleanups from Kairui Song. - memcg fixes and cleanups from Johannes Weiner. - Vishal Moola provides more folio conversions - Zhang Yi removed ll_rw_block() :( - migration enhancements from Peter Xu - migration error-path bugfixes from Huang Ying - Aneesh Kumar added ability for a device driver to alter the memory tiering promotion paths. For optimizations by PMEM drivers, DRM drivers, etc. - vma merging improvements from Jakub Matěn. - NUMA hinting cleanups from David Hildenbrand. - xu xin added aditional userspace visibility into KSM merging activity. - THP & KSM code consolidation from Qi Zheng. - more folio work from Matthew Wilcox. - KASAN updates from Andrey Konovalov. - DAMON cleanups from Kaixu Xia. - DAMON work from SeongJae Park: fixes, cleanups. - hugetlb sysfs cleanups from Muchun Song. - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core. Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1] * tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits) hugetlb: allocate vma lock for all sharable vmas hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer hugetlb: fix vma lock handling during split vma and range unmapping mglru: mm/vmscan.c: fix imprecise comments mm/mglru: don't sync disk for each aging cycle mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol mm: memcontrol: use do_memsw_account() in a few more places mm: memcontrol: deprecate swapaccounting=0 mode mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled mm/secretmem: remove reduntant return value mm/hugetlb: add available_huge_pages() func mm: remove unused inline functions from include/linux/mm_inline.h selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd selftests/vm: add thp collapse shmem testing selftests/vm: add thp collapse file and tmpfs testing selftests/vm: modularize thp collapse memory operations selftests/vm: dedup THP helpers mm/khugepaged: add tracepoint to hpage_collapse_scan_file() mm/madvise: add file and shmem support to MADV_COLLAPSE ... |
||
Lin Yujun
|
6a02124c87 |
ACPI: HMAT: Release platform device in case of platform_device_add_data() fails
The platform device is not released when platform_device_add_data()
fails. And platform_device_put() perfom one more pointer check than
put_device() to check for errors in the 'pdev' pointer.
Use platform_device_put() to release platform device in
platform_device_add()/platform_device_add_data()/
platform_device_add_resources() error case.
Fixes:
|
||
Bo Liu
|
0f702033a6 |
dax: Remove usage of the deprecated ida_simple_xxx API
ida_alloc_max() makes it clear that the second argument is inclusive, and the alloc/free terminology is more idiomatic and symmetric then get/remove. Signed-off-by: Bo Liu <liubo03@inspur.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/20220926012635.3205-1-liubo03@inspur.com [djbw: reword changelog] Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
Aneesh Kumar K.V
|
7b88bda376 |
mm/demotion/dax/kmem: set node's abstract distance to MEMTIER_DEFAULT_DAX_ADISTANCE
By default, all nodes are assigned to the default memory tier which is the memory tier designated for nodes with DRAM Set dax kmem device node's tier to slower memory tier by assigning abstract distance to MEMTIER_DEFAULT_DAX_ADISTANCE. Low-level drivers like papr_scm or ACPI NFIT can initialize memory device type to a more accurate value based on device tree details or HMAT. If the kernel doesn't find the memory type initialized, a default slower memory type is assigned by the kmem driver. [aneesh.kumar@linux.ibm.com: assign correct memory type for multiple dax devices with the same node affinity] Link: https://lkml.kernel.org/r/20220826100224.542312-1-aneesh.kumar@linux.ibm.com Link: https://lkml.kernel.org/r/20220818131042.113280-5-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Wei Xu <weixugc@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Bharata B Rao <bharata@amd.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Hesham Almatary <hesham.almatary@huawei.com> Cc: Jagdish Gediya <jvgediya.oss@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Yang Shi <shy828301@gmail.com> Cc: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Dan Williams
|
67feaba413 |
devdax: Fix soft-reservation memory description
The "hmem" platform-devices that are created to represent the
platform-advertised "Soft Reserved" memory ranges end up inserting a
resource that causes the iomem_resource tree to look like this:
340000000-43fffffff : hmem.0
340000000-43fffffff : Soft Reserved
340000000-43fffffff : dax0.0
This is because insert_resource() reparents ranges when they completely
intersect an existing range.
This matters because code that uses region_intersects() to scan for a
given IORES_DESC will only check that top-level 'hmem.0' resource and
not the 'Soft Reserved' descendant.
So, to support EINJ (via einj_error_inject()) to inject errors into
memory hosted by a dax-device, be sure to describe the memory as
IORES_DESC_SOFT_RESERVED. This is a follow-on to:
commit
|
||
Shiyang Ruan
|
8012b86608 |
dax: introduce holder for dax_device
Patch series "v14 fsdax-rmap + v11 fsdax-reflink", v2. The patchset fsdax-rmap is aimed to support shared pages tracking for fsdax. It moves owner tracking from dax_assocaite_entry() to pmem device driver, by introducing an interface ->memory_failure() for struct pagemap. This interface is called by memory_failure() in mm, and implemented by pmem device. Then call holder operations to find the filesystem which the corrupted data located in, and call filesystem handler to track files or metadata associated with this page. Finally we are able to try to fix the corrupted data in filesystem and do other necessary processing, such as killing processes who are using the files affected. The call trace is like this: memory_failure() |* fsdax case |------------ |pgmap->ops->memory_failure() => pmem_pgmap_memory_failure() | dax_holder_notify_failure() => | dax_device->holder_ops->notify_failure() => | - xfs_dax_notify_failure() | |* xfs_dax_notify_failure() | |-------------------------- | | xfs_rmap_query_range() | | xfs_dax_failure_fn() | | * corrupted on metadata | | try to recover data, call xfs_force_shutdown() | | * corrupted on file data | | try to recover data, call mf_dax_kill_procs() |* normal case |------------- |mf_generic_kill_procs() The patchset fsdax-reflink attempts to add CoW support for fsdax, and takes XFS, which has both reflink and fsdax features, as an example. One of the key mechanisms needed to be implemented in fsdax is CoW. Copy the data from srcmap before we actually write data to the destination iomap. And we just copy range in which data won't be changed. Another mechanism is range comparison. In page cache case, readpage() is used to load data on disk to page cache in order to be able to compare data. In fsdax case, readpage() does not work. So, we need another compare data with direct access support. With the two mechanisms implemented in fsdax, we are able to make reflink and fsdax work together in XFS. This patch (of 14): To easily track filesystem from a pmem device, we introduce a holder for dax_device structure, and also its operation. This holder is used to remember who is using this dax_device: - When it is the backend of a filesystem, the holder will be the instance of this filesystem. - When this pmem device is one of the targets in a mapped device, the holder will be this mapped device. In this case, the mapped device has its own dax_device and it will follow the first rule. So that we can finally track to the filesystem we needed. The holder and holder_ops will be set when filesystem is being mounted, or an target device is being activated. Link: https://lkml.kernel.org/r/20220603053738.1218681-1-ruansy.fnst@fujitsu.com Link: https://lkml.kernel.org/r/20220603053738.1218681-2-ruansy.fnst@fujitsu.com Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dan Williams <dan.j.wiliams@intel.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: Goldwyn Rodrigues <rgoldwyn@suse.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Goldwyn Rodrigues <rgoldwyn@suse.com> Cc: Ritesh Harjani <riteshh@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Jane Chu
|
047218ec90 |
dax: add .recovery_write dax_operation
Introduce dax_recovery_write() operation. The function is used to recover a dax range that contains poison. Typical use case is when a user process receives a SIGBUS with si_code BUS_MCEERR_AR indicating poison(s) in a dax range, in response, the user process issues a pwrite() to the page-aligned dax range, thus clears the poison and puts valid data in the range. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jane Chu <jane.chu@oracle.com> Link: https://lore.kernel.org/r/20220422224508.440670-6-jane.chu@oracle.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
|
Jane Chu
|
e511c4a3d2 |
dax: introduce DAX_RECOVERY_WRITE dax access mode
Up till now, dax_direct_access() is used implicitly for normal
access, but for the purpose of recovery write, dax range with
poison is requested. To make the interface clear, introduce
enum dax_access_mode {
DAX_ACCESS,
DAX_RECOVERY_WRITE,
}
where DAX_ACCESS is used for normal dax access, and
DAX_RECOVERY_WRITE is used for dax recovery write.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Link: https://lore.kernel.org/r/165247982851.52965.11024212198889762949.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
||
|
Linus Torvalds
|
f0614eefbf |
dax for 5.18
- Fix a crash due to a missing rcu_barrier() in dax_fs_exit() - Fix two miscellaneous doc issues -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYjp4zgAKCRDfioYZHlFs ZwgDAQD/jJE/uyFozwZR/YD8G293Hzs/acPUEQ/09t06W68SIAEAtwBr3WHKiFJL M+utFlm05fShOQl3lGwqiPS5/mQvzwc= =7AnI -----END PGP SIGNATURE----- Merge tag 'dax-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull DAX updates from Dan Williams: "Andrew has been shepherding major dax features that touch the core -mm through his tree, but I still collect the dax updates that are core-mm independent. - Fix a crash due to a missing rcu_barrier() in dax_fs_exit() - Fix two miscellaneous doc issues" * tag 'dax-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dax: Fix missing kdoc for dax_device dax: make sure inodes are flushed before destroy cache fsdax: fix function description |
||
|
Linus Torvalds
|
6b1f86f8e9 |
Filesystem folio changes for 5.18
Primarily this series converts some of the address_space operations
to take a folio instead of a page.
->is_partially_uptodate() takes a folio instead of a page and changes the
type of the 'from' and 'count' arguments to make it obvious they're bytes.
->invalidatepage() becomes ->invalidate_folio() and has a similar type change.
->launder_page() becomes ->launder_folio()
->set_page_dirty() becomes ->dirty_folio() and adds the address_space as
an argument.
There are a couple of other misc changes up front that weren't worth
separating into their own pull request.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmI4hqMACgkQDpNsjXcp
gj7r7Af/fVJ7m8kKqjP/IayX3HiJRuIDQw+vM++BlRNXdjz+IyED6whdmFGxJeOY
BMyT+8ApOAz7ErS4G+7fAv4ScJK/aEgFUsnSeAiCp0PliiEJ5NNJzElp6sVmQ7H5
SX7+Ek444FZUGsQuy0qL7/ELpR3ditnD7x+5U2g0p5TeaHGUQn84crRyfR4xuhNG
EBD9D71BOb7OxUcOHe93pTkK51QsQ0aCrcIsB1tkK5KR0BAthn1HqF7ehL90Rvrr
omx5M7aDWGY4oj7IKrhlAs+55Ah2WaOzrZBp0FXNbr4UENDBKWKyUxErwa4xPkf6
Gm1iQG/CspOHnxN3YWsd5WjtlL3A+A==
=cOiq
-----END PGP SIGNATURE-----
Merge tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecache
Pull filesystem folio updates from Matthew Wilcox:
"Primarily this series converts some of the address_space operations to
take a folio instead of a page.
Notably:
- a_ops->is_partially_uptodate() takes a folio instead of a page and
changes the type of the 'from' and 'count' arguments to make it
obvious they're bytes.
- a_ops->invalidatepage() becomes ->invalidate_folio() and has a
similar type change.
- a_ops->launder_page() becomes ->launder_folio()
- a_ops->set_page_dirty() becomes ->dirty_folio() and adds the
address_space as an argument.
There are a couple of other misc changes up front that weren't worth
separating into their own pull request"
* tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecache: (53 commits)
fs: Remove aops ->set_page_dirty
fb_defio: Use noop_dirty_folio()
fs: Convert __set_page_dirty_no_writeback to noop_dirty_folio
fs: Convert __set_page_dirty_buffers to block_dirty_folio
nilfs: Convert nilfs_set_page_dirty() to nilfs_dirty_folio()
mm: Convert swap_set_page_dirty() to swap_dirty_folio()
ubifs: Convert ubifs_set_page_dirty to ubifs_dirty_folio
f2fs: Convert f2fs_set_node_page_dirty to f2fs_dirty_node_folio
f2fs: Convert f2fs_set_data_page_dirty to f2fs_dirty_data_folio
f2fs: Convert f2fs_set_meta_page_dirty to f2fs_dirty_meta_folio
afs: Convert afs_dir_set_page_dirty() to afs_dir_dirty_folio()
btrfs: Convert extent_range_redirty_for_io() to use folios
fs: Convert trivial uses of __set_page_dirty_nobuffers to filemap_dirty_folio
btrfs: Convert from set_page_dirty to dirty_folio
fscache: Convert fscache_set_page_dirty() to fscache_dirty_folio()
fs: Add aops->dirty_folio
fs: Remove aops->launder_page
orangefs: Convert launder_page to launder_folio
nfs: Convert from launder_page to launder_folio
fuse: Convert from launder_page to launder_folio
...
|
||
Muchun Song
|
fd60b28842 |
fs: allocate inode by using alloc_inode_sb()
The inode allocation is supposed to use alloc_inode_sb(), so convert kmem_cache_alloc() of all filesystems to alloc_inode_sb(). Link: https://lkml.kernel.org/r/20220228122126.37293-5-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Theodore Ts'o <tytso@mit.edu> [ext4] Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Alex Shi <alexs@kernel.org> Cc: Anna Schumaker <Anna.Schumaker@Netapp.com> Cc: Chao Yu <chao@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Fam Zheng <fam.zheng@bytedance.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kari Argillander <kari.argillander@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Matthew Wilcox (Oracle)
|
46de8b9794 |
fs: Convert __set_page_dirty_no_writeback to noop_dirty_folio
This is a mechanical change. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs Tested-by: David Howells <dhowells@redhat.com> # afs |
||
|
Matthew Wilcox (Oracle)
|
5660a8630d |
fs: Remove noop_invalidatepage()
We used to have to use noop_invalidatepage() to prevent block_invalidatepage() from being called, but that behaviour is now gone. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs Tested-by: David Howells <dhowells@redhat.com> # afs |
||
Ira Weiny
|
db8cd5efee |
dax: Fix missing kdoc for dax_device
struct dax_device has a member named ops which was undocumented. Add the kdoc. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/20220304204655.3489216-1-ira.weiny@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
Tong Zhang
|
a7e8de822e |
dax: make sure inodes are flushed before destroy cache
A bug can be triggered by following command
$ modprobe nd_pmem && modprobe -r nd_pmem
[ 10.060014] BUG dax_cache (Not tainted): Objects remaining in dax_cache on __kmem_cache_shutdown()
[ 10.060938] Slab 0x0000000085b729ac objects=9 used=1 fp=0x000000004f5ae469 flags=0x200000000010200(slab|head|node)
[ 10.062433] Call Trace:
[ 10.062673] dump_stack_lvl+0x34/0x44
[ 10.062865] slab_err+0x90/0xd0
[ 10.063619] __kmem_cache_shutdown+0x13b/0x2f0
[ 10.063848] kmem_cache_destroy+0x4a/0x110
[ 10.064058] __x64_sys_delete_module+0x265/0x300
This is caused by dax_fs_exit() not flushing inodes before destroy cache.
To fix this issue, call rcu_barrier() before destroy cache.
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220212071111.148575-1-ztong0001@gmail.com
Fixes:
|
||
|
Linus Torvalds
|
f56caedaf9 |
Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton: "146 patches. Subsystems affected by this patch series: kthread, ia64, scripts, ntfs, squashfs, ocfs2, vfs, and mm (slab-generic, slab, kmemleak, dax, kasan, debug, pagecache, gup, shmem, frontswap, memremap, memcg, selftests, pagemap, dma, vmalloc, memory-failure, hugetlb, userfaultfd, vmscan, mempolicy, oom-kill, hugetlbfs, migration, thp, ksm, page-poison, percpu, rmap, zswap, zram, cleanups, hmm, and damon)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (146 commits) mm/damon: hide kernel pointer from tracepoint event mm/damon/vaddr: hide kernel pointer from damon_va_three_regions() failure log mm/damon/vaddr: use pr_debug() for damon_va_three_regions() failure logging mm/damon/dbgfs: remove an unnecessary variable mm/damon: move the implementation of damon_insert_region to damon.h mm/damon: add access checking for hugetlb pages Docs/admin-guide/mm/damon/usage: update for schemes statistics mm/damon/dbgfs: support all DAMOS stats Docs/admin-guide/mm/damon/reclaim: document statistics parameters mm/damon/reclaim: provide reclamation statistics mm/damon/schemes: account how many times quota limit has exceeded mm/damon/schemes: account scheme actions that successfully applied mm/damon: remove a mistakenly added comment for a future feature Docs/admin-guide/mm/damon/usage: update for kdamond_pid and (mk|rm)_contexts Docs/admin-guide/mm/damon/usage: mention tracepoint at the beginning Docs/admin-guide/mm/damon/usage: remove redundant information Docs/admin-guide/mm/damon/usage: update for scheme quotas and watermarks mm/damon: convert macro functions to static inline functions mm/damon: modify damon_rand() macro to static inline function mm/damon: move damon_rand() definition into damon.h ... |
||
Joao Martins
|
14606001ef |
device-dax: compound devmap support
Use the newly added compound devmap facility which maps the assigned dax ranges as compound pages at a page size of @align. dax devices are created with a fixed @align (huge page size) which is enforced through as well at mmap() of the device. Faults, consequently happen too at the specified @align specified at the creation, and those don't change throughout dax device lifetime. MCEs unmap a whole dax huge page, as well as splits occurring at the configured page size. Performance measured by gup_test improves considerably for unpin_user_pages() and altmap with NVDIMMs: $ gup_test -f /dev/dax1.0 -m 16384 -r 10 -S -a -n 512 -w (pin_user_pages_fast 2M pages) put:~71 ms -> put:~22 ms [altmap] (pin_user_pages_fast 2M pages) get:~524ms put:~525 ms -> get: ~127ms put:~71ms $ gup_test -f /dev/dax1.0 -m 129022 -r 10 -S -a -n 512 -w (pin_user_pages_fast 2M pages) put:~513 ms -> put:~188 ms [altmap with -m 127004] (pin_user_pages_fast 2M pages) get:~4.1 secs put:~4.12 secs -> get:~1sec put:~563ms .. as well as unpin_user_page_range_dirty_lock() being just as effective as THP/hugetlb[0] pages. [0] https://lore.kernel.org/linux-mm/20210212130843.13865-5-joao.m.martins@oracle.com/ Link: https://lkml.kernel.org/r/20211202204422.26777-12-joao.m.martins@oracle.com Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Joao Martins
|
6ec228b6fe |
device-dax: remove pfn from __dev_dax_{pte,pmd,pud}_fault()
After moving the page mapping to be set prior to pte insertion, the pfn in dev_dax_huge_fault() no longer is necessary. Remove it, as well as the @pfn argument passed to the internal fault handler helpers. [akpm@linux-foundation.org: fix CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=n build] Link: https://lkml.kernel.org/r/20211202204422.26777-11-joao.m.martins@oracle.com Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Suggested-by: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Joao Martins
|
0e7325f03f |
device-dax: set mapping prior to vmf_insert_pfn{,_pmd,pud}()
Normally, the @page mapping is set prior to inserting the page into a
page table entry. Make device-dax adhere to the same ordering, rather
than setting mapping after the PTE is inserted.
The address_space never changes and it is always associated with the
same inode and underlying pages. So, the page mapping is set once but
cleared when the struct pages are removed/freed (i.e. after
{devm_}memunmap_pages()).
Link: https://lkml.kernel.org/r/20211202204422.26777-10-joao.m.martins@oracle.com
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Joao Martins
|
a0fb038e50 |
device-dax: factor out page mapping initialization
Move initialization of page->mapping into a separate helper. This is in preparation to move the mapping set to be prior to inserting the page table entry and also for tidying up compound page handling into one helper. Link: https://lkml.kernel.org/r/20211202204422.26777-9-joao.m.martins@oracle.com Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Joao Martins
|
fc65c4eb0b |
device-dax: ensure dev_dax->pgmap is valid for dynamic devices
Right now, only static dax regions have a valid @pgmap pointer in its struct dev_dax. Dynamic dax case however, do not. In preparation for device-dax compound devmap support, make sure that dev_dax pgmap field is set after it has been allocated and initialized. dynamic dax device have the @pgmap is allocated at probe() and it's managed by devm (contrast to static dax region which a pgmap is provided and dax core kfrees it). So in addition to ensure a valid @pgmap, clear the pgmap when the dynamic dax device is released to avoid the same pgmap ranges to be re-requested across multiple region device reconfigs. Add a static_dev_dax() and use that helper in dev_dax_probe() to ensure the initialization differences between dynamic and static regions are more explicit. While at it, consolidate the ranges initialization when we allocate the @pgmap for the dynamic dax region case. Also take the opportunity to document the differences between static and dynamic da regions. Link: https://lkml.kernel.org/r/20211202204422.26777-8-joao.m.martins@oracle.com Suggested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Joao Martins
|
09b8013703 |
device-dax: use struct_size()
Use the struct_size() helper for the size of a struct with variable array member at the end, rather than manually calculating it. Link: https://lkml.kernel.org/r/20211202204422.26777-7-joao.m.martins@oracle.com Suggested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Joao Martins
|
b9b5777f09 |
device-dax: use ALIGN() for determining pgoff
Rather than calculating @pgoff manually, switch to ALIGN() instead. Link: https://lkml.kernel.org/r/20211202204422.26777-6-joao.m.martins@oracle.com Suggested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |