10892 Commits

Author SHA1 Message Date
Viresh Kumar
dcce162559 i2c: virtio: Add support for zero-length requests
The virtio specification received a new mandatory feature
(VIRTIO_I2C_F_ZERO_LENGTH_REQUEST) for zero length requests. Fail if the
feature isn't offered by the device.

For each read-request, set the VIRTIO_I2C_FLAGS_M_RD flag, as required
by the VIRTIO_I2C_F_ZERO_LENGTH_REQUEST feature.

This allows us to support zero length requests, like SMBUS Quick, where
the buffer need not be sent anymore.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/7c58868cd26d2fc4bd82d0d8b0dfb55636380110.1634808714.git.viresh.kumar@linaro.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jie Deng <jie.deng@intel.com> # once the spec is merged
2021-11-01 05:26:48 -04:00
Pablo Neira Ayuso
c46b38dc87 netfilter: nft_payload: support for inner header matching / mangling
Allow to match and mangle on inner headers / payload data after the
transport header. There is a new field in the pktinfo structure that
stores the inner header offset which is calculated only when requested.
Only TCP and UDP supported at this stage.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-11-01 09:31:03 +01:00
Wu Zongyong
e47be840e8 vdpa: add new attribute VDPA_ATTR_DEV_MIN_VQ_SIZE
This attribute advertises the min value of virtqueue size. The value is
1 by default.

Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com>
Link: https://lore.kernel.org/r/2bbc417355c4d22298050b1ba887cecfbde3e85d.1635493219.git.wuzongyong@linux.alibaba.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01 04:30:35 -04:00
Pablo Neira Ayuso
56fa95014a netfilter: nft_meta: add NFT_META_IFTYPE
Generalize NFT_META_IIFTYPE to NFT_META_IFTYPE which allows you to match
on the interface type of the skb->dev field. This field is used by the
netdev family to add an implicit dependency to skip non-ethernet packets
when matching on layer 3 and 4 TCP/IP header fields.

For backward compatibility, add the NFT_META_IIFTYPE alias to
NFT_META_IFTYPE.

Add __NFT_META_IIFTYPE, to be used by userspace in the future to match
specifically on the iiftype.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-11-01 09:29:20 +01:00
Paolo Bonzini
4e33868433 KVM/arm64 updates for Linux 5.16
- More progress on the protected VM front, now with the full
   fixed feature set as well as the limitation of some hypercalls
   after initialisation.
 
 - Cleanup of the RAZ/WI sysreg handling, which was pointlessly
   complicated
 
 - Fixes for the vgic placement in the IPA space, together with a
   bunch of selftests
 
 - More memcg accounting of the memory allocated on behalf of a guest
 
 - Timer and vgic selftests
 
 - Workarounds for the Apple M1 broken vgic implementation
 
 - KConfig cleanups
 
 - New kvmarm.mode=none option, for those who really dislike us
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAmF7u5YPHG1hekBrZXJu
 ZWwub3JnAAoJECPQ0LrRPXpD6w8QAIKDLJCTqkxv5Vh4ZSmtXxg4gTZMBlg8oSQ8
 sVL639aqBvFe3A6Vmz6IwBm+NT7Sm1zxkuH9qHzVR1gmXq0oLYNrIuyrzRW8PvqO
 hIkSRRoVsf03755TmkxwR7/2jAFxb6FhEVAy6VWdQyI44orihIPvMp8aTIq+jvU+
 XoNGb/rPf9HpSUtvuaHYvZhSZBhoi5dRnkr33R1+VR69n7Axs8lm905xcl6Pt0a0
 QqYZWQvFu/BXPyNflG7LUsegRF/iiV2vNTbNNowkzlV5suqxBpJAp6ApDL/gWrHv
 ya/6cMqicSjBIkWnawhXY98w6/5xfzK4IV/zc00FNWOlUdVP89Thqrgc8EkigS9R
 BGcxFFqj41snr+ensSBBIkNtV+dBX52H3rUE0F9seiTXm8QWI86JobdeNadT8tUP
 TXdOeCUcA+cp4Ngln18lsbOEaBkPA5H1po1nUFPHbKnVOxnqXScB7E/xF6rAbryV
 m+Z+oidU7MyS/Ev/Da0ww/XFx7cs2ez9EgeQvjcdFAvUMqS6kcXEExvgGYlm+KRQ
 GBMKPLCNHKdflMANoSpol7MZUmPJ45XoWKW1rntj2r9X+oJW2Z2hEx32xrWDJdqK
 ixnbjog5kNZb0CjLGsUC90lo2hpRJecaLhAjgTLYaNC1QxGPrt92eat6gnwuMTBc
 mpADqi7w
 =qBAO
 -----END PGP SIGNATURE-----

Merge tag 'kvmarm-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 updates for Linux 5.16

- More progress on the protected VM front, now with the full
  fixed feature set as well as the limitation of some hypercalls
  after initialisation.

- Cleanup of the RAZ/WI sysreg handling, which was pointlessly
  complicated

- Fixes for the vgic placement in the IPA space, together with a
  bunch of selftests

- More memcg accounting of the memory allocated on behalf of a guest

- Timer and vgic selftests

- Workarounds for the Apple M1 broken vgic implementation

- KConfig cleanups

- New kvmarm.mode=none option, for those who really dislike us
2021-10-31 02:28:48 -04:00
Coly Li
cf2197ca4b bcache: move uapi header bcache.h to bcache code directory
The header file include/uapi/linux/bcache.h is not really a user space
API heaer. This file defines the ondisk format of bcache internal meta
data but no one includes it from user space, bcache-tools has its own
copy of this header with minor modification.

Therefore, this patch moves include/uapi/linux/bcache.h to bcache code
directory as drivers/md/bcache/bcache_ondisk.h.

Suggested-by: Arnd Bergmann <arnd@kernel.org>
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20211029060930.119923-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-29 06:43:21 -06:00
David Sterba
e77fbf9903 btrfs: send: prepare for v2 protocol
This is preparatory work for send protocol update to version 2 and
higher.

We have many pending protocol update requests but still don't have the
basic protocol rev in place, the first thing that must happen is to do
the actual versioning support.

The protocol version is u32 and is a new member in the send ioctl
struct. Validity of the version field is backed by a new flag bit. Old
kernels would fail when a higher version is requested. Version protocol
0 will pick the highest supported version, BTRFS_SEND_STREAM_VERSION,
  that's also exported in sysfs.

The version is still unchanged and will be increased once we have new
incompatible commands or stream updates.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-10-29 12:38:43 +02:00
Kumar Kartikeya Dwivedi
d6aef08a87 bpf: Add bpf_kallsyms_lookup_name helper
This helper allows us to get the address of a kernel symbol from inside
a BPF_PROG_TYPE_SYSCALL prog (used by gen_loader), so that we can
relocate typeless ksym vars.

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211028063501.2239335-2-memxor@gmail.com
2021-10-28 16:30:06 -07:00
Joanne Koong
9330986c03 bpf: Add bloom filter map implementation
This patch adds the kernel-side changes for the implementation of
a bpf bloom filter map.

The bloom filter map supports peek (determining whether an element
is present in the map) and push (adding an element to the map)
operations.These operations are exposed to userspace applications
through the already existing syscalls in the following way:

BPF_MAP_LOOKUP_ELEM -> peek
BPF_MAP_UPDATE_ELEM -> push

The bloom filter map does not have keys, only values. In light of
this, the bloom filter map's API matches that of queue stack maps:
user applications use BPF_MAP_LOOKUP_ELEM/BPF_MAP_UPDATE_ELEM
which correspond internally to bpf_map_peek_elem/bpf_map_push_elem,
and bpf programs must use the bpf_map_peek_elem and bpf_map_push_elem
APIs to query or add an element to the bloom filter map. When the
bloom filter map is created, it must be created with a key_size of 0.

For updates, the user will pass in the element to add to the map
as the value, with a NULL key. For lookups, the user will pass in the
element to query in the map as the value, with a NULL key. In the
verifier layer, this requires us to modify the argument type of
a bloom filter's BPF_FUNC_map_peek_elem call to ARG_PTR_TO_MAP_VALUE;
as well, in the syscall layer, we need to copy over the user value
so that in bpf_map_peek_elem, we know which specific value to query.

A few things to please take note of:
 * If there are any concurrent lookups + updates, the user is
responsible for synchronizing this to ensure no false negative lookups
occur.
 * The number of hashes to use for the bloom filter is configurable from
userspace. If no number is specified, the default used will be 5 hash
functions. The benchmarks later in this patchset can help compare the
performance of using different number of hashes on different entry
sizes. In general, using more hashes decreases both the false positive
rate and the speed of a lookup.
 * Deleting an element in the bloom filter map is not supported.
 * The bloom filter map may be used as an inner map.
 * The "max_entries" size that is specified at map creation time is used
to approximate a reasonable bitmap size for the bloom filter, and is not
otherwise strictly enforced. If the user wishes to insert more entries
into the bloom filter than "max_entries", they may do so but they should
be aware that this may lead to a higher false positive rate.

Signed-off-by: Joanne Koong <joannekoong@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211027234504.30744-2-joannekoong@fb.com
2021-10-28 13:22:49 -07:00
Alex Deucher
72f4c9d570 drm/amdgpu/UAPI: rearrange header to better align related items
Move the RAS query parameters to align with the INFO query where
they are used.  No functional change.

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28 14:26:59 -04:00
Amir Goldstein
a390ccb316 fuse: add FOPEN_NOFLUSH
Add flag returned by FUSE_OPEN and FUSE_CREATE requests to avoid flushing
data cache on close.

Different filesystems implement ->flush() is different ways:
 - Most disk filesystems do not implement ->flush() at all
 - Some network filesystem (e.g. nfs) flush local write cache of
   FMODE_WRITE file and send a "flush" command to server
 - Some network filesystem (e.g. cifs) flush local write cache of
   FMODE_WRITE file without sending an additional command to server

FUSE flushes local write cache of ANY file, even non FMODE_WRITE
and sends a "flush" command to server (if server implements it).

The FUSE implementation of ->flush() seems over agressive and
arbitrary and does not make a lot of sense when writeback caching is
disabled.

Instead of deciding on another arbitrary implementation that makes
sense, leave the choice of per-file flush behavior in the hands of
the server.

Link: https://lore.kernel.org/linux-fsdevel/CAJfpegspE8e6aKd47uZtSYX8Y-1e1FWS0VL0DH2Skb9gQP5RJQ@mail.gmail.com/
Suggested-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-10-28 10:20:31 +02:00
Laurent Pinchart
31fa8cbce4 drm: Add R10 and R12 FourCC
Add FourCCs for 10- and 12-bit red formats with padding to 16 bits.
They correspond to the V4L2 10- and 12-bit greyscale (V4L2_PIX_FMT_Y10
and V4L2_PIX_FMT_Y12) formats, as well as the Bayer formats with the
same bit depth (V4L2_PIX_FMT_SBGGR{10,12} and all other Bayer pattern
permutations).

These formats are not used by any kernel driver at this point, but need
to be exposed to applications by libcamera, which uses DRM FourCCs for
pixel formats.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211027233140.12268-1-laurent.pinchart@ideasonboard.com
2021-10-28 17:20:45 +10:00
Takashi Sakamoto
407359d44e ALSA: firewire-motu: export meter information to userspace as float value
In command DSP models, one meter information consists of 4 bytes for
IEEE 764 floating point (binary32). In previous patch, it is exported
to userspace as 32 bit storage since the storage is also handled in
ALSA firewire-motu driver as well in kernel space in which floating point
arithmetic is not preferable. On the other hand, ALSA firewire-motu driver
doesn't perform floating point calculation. The driver just gather meter
information from isochronous packets and fill structure fields for
userspace.

In 'header' target of Kbuild, UAPI headers are processed before installed.
In this timing, #ifdef macro with __KERNEL__ is removed. This mechanism
is useful in the case so that the 32 bit storage can be accessible as u32
type in kernel space and float type in user space. We can see the same
usage in ''struct acct_v3' in 'include/uapi/linux/acct.h'.

This commit is for the above idea. Additionally, due to message
protocol, meter information is filled with 0xffffffff in the end of
period but 0xffffffff is invalid as binary32. To avoid confusion in
userspace application, the last two elements are left without any
assignment.

Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20211027125529.54295-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-28 09:10:41 +02:00
Takashi Sakamoto
0f166e1257 ALSA: firewire-motu: refine parser for meter information in register DSP models
After further investigation, I realize that the total number of elements
in array is not enough to store all of related messages from device.
This commit refines meter array and message parser.

In terms of channel identifier, register DSP models are classified to
two categories:

1. the target of output is selectable

828mk2, 896hd, and Traveler are in the category. They transfer messages
with channel identifier between 0x00 and 0x13 for input meters,
therefore 20 elements are needed to store.

On the other hand, they transfer messages with channel identifier for one
pair of output meters. The selection is done by asynchronous write
transaction to offset 0x'ffff'f000'0b2c. The table for relationship
between written value and available identifiers is below:

=============  ===============
written value  identifier pair
=============  ===============
0x00000b00     0x80/0x81
0x00000b01     0x82/0x83
...            ...
0x00000b0b     0x96/0x97
...            ...
0x00000b10     0xa0/0xa1
...            ...
0x00000b3f     0xfe/0xff
...            ...
greater        0xfe/0xff
=============  ===============

Actually in the above three models, 0x96/0x97 pair is the maximum. Thus
the number of available output meter is 24.

2. all of output is available

8 pre, Ultralite, Audio Express, and 4 pre are in the category. They
transfer messages for output meters without any selection. The table for
available identifier for each direction is below:

==============  =========  ==========
model           input      output
==============  =========  ==========
8 pre           0x00-0x0f  0x82-0x8d
Ultralite       0x00-0x09  0x82-0x8f
Audio Express   0x00-0x09  0x80-0x8d
4 pre           0x00-0x09  0x80-0x8d
==============  =========  ==========

Some of available identifiers might not be used for actual output meters.

Anyway, 24 plus 24 elements accommodate the input/output meters.

I note that isochronous packet from V3HD/V4HD deliver no message.
Notification by asynchronous transaction to registered address seems to be
used for the purpose as well as for change of mixer parameter.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20211027125529.54295-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-28 09:10:34 +02:00
Dave Airlie
970eae1560 Linux 5.15-rc7
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmF298ceHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGIJYH/1rsEFQQ6caeQdy1
 z9eFIe48DNM4l7bFk+qEj2UAbzPdahVJ299Mg5fW0n2CDemOc9/n0b9TxQ37YObi
 mOzu0xwJVupIxkyFMPQSSc2q8aLm67NSpJy08DsmaNses5hSvu8x15RPHLQTybjt
 SwtKns+jpCq79P1GWbrB5e5UkLb0VNoxNp4L1U4pMrYGcEkJUXbaxNY2V/JcXdM7
 Vtn+qN0T/J6V6QVftv0t8Ecj3bjEnmL3kZHaTaNg3dGeKRpCGyHc5lcBQ0cNFG6t
 vjZ9VbuhBzGI3TN2tHH5hpA1UXo7HPBBCwQqxF1jeGLGHULikYwZ3TAPWqL3QZqC
 9cxr9SY=
 =p75d
 -----END PGP SIGNATURE-----

BackMerge tag 'v5.15-rc7' into drm-next

The msm next tree is based on rc3, so let's just backmerge rc7 before pulling it in.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-28 14:59:38 +10:00
Michael Weiß
2cc1ae4878 dm: introduce audit event module for device mapper
To be able to send auditing events to user space, we introduce a
generic dm-audit module. It provides helper functions to emit audit
events through the kernel audit subsystem. We claim the
AUDIT_DM_CTRL type=1336 and AUDIT_DM_EVENT type=1337 out of the
audit event messages range in the corresponding userspace api in
'include/uapi/linux/audit.h' for those events.

AUDIT_DM_CTRL is used to provide information about creation and
destruction of device mapper targets which are triggered by user space
admin control actions.
AUDIT_DM_EVENT is used to provide information about actual errors
during operation of the mapped device, showing e.g. integrity
violations in audit log.

Following commits to device mapper targets actually will make use of
this to emit those events in relevant cases.

The audit logs look like this if executing the following simple test:

 # dd if=/dev/zero of=test.img bs=1M count=1024
 # losetup -f test.img
 # integritysetup -vD format --integrity sha256 -t 32 /dev/loop0
 # integritysetup open -D /dev/loop0 --integrity sha256 integritytest
 # integritysetup status integritytest
 # integritysetup close integritytest
 # integritysetup open -D /dev/loop0 --integrity sha256 integritytest
 # integritysetup status integritytest
 # dd if=/dev/urandom of=/dev/loop0 bs=512 count=1 seek=100000
 # dd if=/dev/mapper/integritytest of=/dev/null

-------------------------
audit.log from auditd

type=UNKNOWN[1336] msg=audit(1630425039.363:184): module=integrity
op=ctr ppid=3807 pid=3819 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0
egid=0 sgid=0 fsgid=0 tty=pts2 ses=3 comm="integritysetup"
exe="/sbin/integritysetup" subj==unconfined dev=254:3
error_msg='success' res=1
type=UNKNOWN[1336] msg=audit(1630425039.471:185): module=integrity
op=dtr ppid=3807 pid=3819 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0
egid=0 sgid=0 fsgid=0 tty=pts2 ses=3 comm="integritysetup"
exe="/sbin/integritysetup" subj==unconfined dev=254:3
error_msg='success' res=1
type=UNKNOWN[1336] msg=audit(1630425039.611:186): module=integrity
op=ctr ppid=3807 pid=3819 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0
egid=0 sgid=0 fsgid=0 tty=pts2 ses=3 comm="integritysetup"
exe="/sbin/integritysetup" subj==unconfined dev=254:3
error_msg='success' res=1
type=UNKNOWN[1336] msg=audit(1630425054.475:187): module=integrity
op=dtr ppid=3807 pid=3819 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0
egid=0 sgid=0 fsgid=0 tty=pts2 ses=3 comm="integritysetup"
exe="/sbin/integritysetup" subj==unconfined dev=254:3
error_msg='success' res=1

type=UNKNOWN[1336] msg=audit(1630425073.171:191): module=integrity
op=ctr ppid=3807 pid=3883 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0
egid=0 sgid=0 fsgid=0 tty=pts2 ses=3 comm="integritysetup"
exe="/sbin/integritysetup" subj==unconfined dev=254:3
error_msg='success' res=1

type=UNKNOWN[1336] msg=audit(1630425087.239:192): module=integrity
op=dtr ppid=3807 pid=3902 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0
egid=0 sgid=0 fsgid=0 tty=pts2 ses=3 comm="integritysetup"
exe="/sbin/integritysetup" subj==unconfined dev=254:3
error_msg='success' res=1

type=UNKNOWN[1336] msg=audit(1630425093.755:193): module=integrity
op=ctr ppid=3807 pid=3906 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0
egid=0 sgid=0 fsgid=0 tty=pts2 ses=3 comm="integritysetup"
exe="/sbin/integritysetup" subj==unconfined dev=254:3
error_msg='success' res=1

type=UNKNOWN[1337] msg=audit(1630425112.119:194): module=integrity
op=integrity-checksum dev=254:3 sector=77480 res=0
type=UNKNOWN[1337] msg=audit(1630425112.119:195): module=integrity
op=integrity-checksum dev=254:3 sector=77480 res=0
type=UNKNOWN[1337] msg=audit(1630425112.119:196): module=integrity
op=integrity-checksum dev=254:3 sector=77480 res=0
type=UNKNOWN[1337] msg=audit(1630425112.119:197): module=integrity
op=integrity-checksum dev=254:3 sector=77480 res=0
type=UNKNOWN[1337] msg=audit(1630425112.119:198): module=integrity
op=integrity-checksum dev=254:3 sector=77480 res=0
type=UNKNOWN[1337] msg=audit(1630425112.119:199): module=integrity
op=integrity-checksum dev=254:3 sector=77480 res=0
type=UNKNOWN[1337] msg=audit(1630425112.119:200): module=integrity
op=integrity-checksum dev=254:3 sector=77480 res=0
type=UNKNOWN[1337] msg=audit(1630425112.119:201): module=integrity
op=integrity-checksum dev=254:3 sector=77480 res=0
type=UNKNOWN[1337] msg=audit(1630425112.119:202): module=integrity
op=integrity-checksum dev=254:3 sector=77480 res=0
type=UNKNOWN[1337] msg=audit(1630425112.119:203): module=integrity
op=integrity-checksum dev=254:3 sector=77480 res=0

Signed-off-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de>
Signed-off-by: Paul Moore <paul@paul-moore.com> # fix audit.h numbering
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-10-27 16:53:47 -04:00
Gabriel Krisman Bertazi
130a3c7421 fanotify: Emit generic error info for error event
The error info is a record sent to users on FAN_FS_ERROR events
documenting the type of error.  It also carries an error count,
documenting how many errors were observed since the last reporting.

Link: https://lore.kernel.org/r/20211025192746.66445-28-krisman@collabora.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2021-10-27 12:53:42 +02:00
Gabriel Krisman Bertazi
8d11a4f43e fanotify: Reserve UAPI bits for FAN_FS_ERROR
FAN_FS_ERROR allows reporting of event type FS_ERROR to userspace, which
is a mechanism to report file system wide problems via fanotify.  This
commit preallocate userspace visible bits to match the FS_ERROR event.

Link: https://lore.kernel.org/r/20211025192746.66445-19-krisman@collabora.com
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2021-10-27 12:34:59 +02:00
Jeremy Kerr
99ce45d5e7 mctp: Implement extended addressing
This change allows an extended address struct - struct sockaddr_mctp_ext
- to be passed to sendmsg/recvmsg. This allows userspace to specify
output ifindex and physical address information (for sendmsg) or receive
the input ifindex/physaddr for incoming messages (for recvmsg). This is
typically used by userspace for MCTP address discovery and assignment
operations.

The extended addressing facility is conditional on a new sockopt:
MCTP_OPT_ADDR_EXT; userspace must explicitly enable addressing before
the kernel will consume/populate the extended address data.

Includes a fix for an uninitialised var:
Reported-by: kernel test robot <lkp@intel.com>

Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-26 14:58:45 +01:00
Srinivas Kandagatla
36ad9bf1d9
ASoC: qdsp6: audioreach: add topology support
Add ASoC topology support in audioreach

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211026111655.1702-14-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-26 13:50:07 +01:00
Luo Jie
1cf4e9a6fb net: phy: add constants for fast retrain related register
Add the constants for 2.5G fast retrain capability
in 10G AN control register, fast retrain status and
control register and THP bypass register into mdio.h.

Signed-off-by: Luo Jie <luoj@codeaurora.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25 14:04:18 +01:00
David Edmondson
e615e35589 KVM: x86: On emulation failure, convey the exit reason, etc. to userspace
Should instruction emulation fail, include the VM exit reason, etc. in
the emulation_failure data passed to userspace, in order that the VMM
can report it as a debugging aid when describing the failure.

Suggested-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210920103737.2696756-4-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-25 06:48:24 -04:00
David Edmondson
a9d496d8e0 KVM: x86: Clarify the kvm_run.emulation_failure structure layout
Until more flags for kvm_run.emulation_failure flags are defined, it
is undetermined whether new payload elements corresponding to those
flags will be additive or alternative. As a hint to userspace that an
alternative is possible, wrap the current payload elements in a union.

Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210920103737.2696756-2-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-25 06:48:24 -04:00
Vincent Mailhol
d99755f71a can: netlink: add interface for CAN-FD Transmitter Delay Compensation (TDC)
Add the netlink interface for TDC parameters of struct can_tdc_const
and can_tdc.

Contrary to the can_bittiming(_const) structures for which there is
just a single IFLA_CAN(_DATA)_BITTMING(_CONST) entry per structure,
here, we create a nested entry IFLA_CAN_TDC. Within this nested entry,
additional IFLA_CAN_TDC_TDC* entries are added for each of the TDC
parameters of the newly introduced struct can_tdc_const and struct
can_tdc.

For struct can_tdc_const, these are:
        IFLA_CAN_TDC_TDCV_MIN
        IFLA_CAN_TDC_TDCV_MAX
        IFLA_CAN_TDC_TDCO_MIN
        IFLA_CAN_TDC_TDCO_MAX
        IFLA_CAN_TDC_TDCF_MIN
        IFLA_CAN_TDC_TDCF_MAX

For struct can_tdc, these are:
        IFLA_CAN_TDC_TDCV
        IFLA_CAN_TDC_TDCO
        IFLA_CAN_TDC_TDCF

This is done so that changes can be applied in the future to the
structures without breaking the netlink interface.

The TDC netlink logic works as follow:

 * CAN_CTRLMODE_FD is not provided:
    - if any TDC parameters are provided: error.

    - TDC parameters not provided: TDC parameters unchanged.

 * CAN_CTRLMODE_FD is provided and is false:
     - TDC is deactivated: both the structure and the
       CAN_CTRLMODE_TDC_{AUTO,MANUAL} flags are flushed.

 * CAN_CTRLMODE_FD provided and is true:
    - CAN_CTRLMODE_TDC_{AUTO,MANUAL} and tdc{v,o,f} not provided: call
      can_calc_tdco() to automatically decide whether TDC should be
      activated and, if so, set CAN_CTRLMODE_TDC_AUTO and uses the
      calculated tdco value.

    - CAN_CTRLMODE_TDC_AUTO and tdco provided: set
      CAN_CTRLMODE_TDC_AUTO and use the provided tdco value. Here,
      tdcv is illegal and tdcf is optional.

    - CAN_CTRLMODE_TDC_MANUAL and both of tdcv and tdco provided: set
      CAN_CTRLMODE_TDC_MANUAL and use the provided tdcv and tdco
      value. Here, tdcf is optional.

    - CAN_CTRLMODE_TDC_{AUTO,MANUAL} are mutually exclusive. Whenever
      one flag is turned on, the other will automatically be turned
      off. Providing both returns an error.

    - Combination other than the one listed above are illegal and will
      return an error.

N.B. above rules mean that whenever CAN_CTRLMODE_FD is provided, the
previous TDC values will be overwritten. The only option to reuse
previous TDC value is to not provide CAN_CTRLMODE_FD.

All the new parameters are defined as u32. This arbitrary choice is
done to mimic the other bittiming values with are also all of type
u32. An u16 would have been sufficient to hold the TDC values.

This patch completes below series (c.f. [1]):
  - commit 289ea9e4ae59 ("can: add new CAN FD bittiming parameters:
    Transmitter Delay Compensation (TDC)")
  - commit c25cc7993243 ("can: bittiming: add calculation for CAN FD
    Transmitter Delay Compensation (TDC)")

[1] https://lore.kernel.org/linux-can/20210224002008.4158-1-mailhol.vincent@wanadoo.fr/T/#t

Link: https://lore.kernel.org/all/20210918095637.20108-5-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-10-24 16:24:29 +02:00
Vincent Mailhol
63dfe07096 can: bittiming: allow TDC{V,O} to be zero and add can_tdc_const::tdc{v,o,f}_min
ISO 11898-1 specifies in section 11.3.3 "Transmitter delay
compensation" that "the configuration range for [the] SSP position
shall be at least 0 to 63 minimum time quanta."

Because SSP = TDCV + TDCO, it means that we should allow both TDCV and
TDCO to hold zero value in order to honor SSP's minimum possible
value.

However, current implementation assigned special meaning to TDCV and
TDCO's zero values:
  * TDCV = 0 -> TDCV is automatically measured by the transceiver.
  * TDCO = 0 -> TDC is off.

In order to allow for those values to really be zero and to maintain
current features, we introduce two new flags:
  * CAN_CTRLMODE_TDC_AUTO indicates that the controller support
    automatic measurement of TDCV.
  * CAN_CTRLMODE_TDC_MANUAL indicates that the controller support
    manual configuration of TDCV. N.B.: current implementation failed
    to provide an option for the driver to indicate that only manual
    mode was supported.

TDC is disabled if both CAN_CTRLMODE_TDC_AUTO and
CAN_CTRLMODE_TDC_MANUAL flags are off, c.f. the helper function
can_tdc_is_enabled() which is also introduced in this patch.

Also, this patch adds three fields: tdcv_min, tdco_min and tdcf_min to
struct can_tdc_const. While we are not convinced that those three
fields could be anything else than zero, we can imagine that some
controllers might specify a lower bound on these. Thus, those minimums
are really added "just in case".

Comments of struct can_tdc and can_tdc_const are updated accordingly.

Finally, the changes are applied to the etas_es58x driver.

Link: https://lore.kernel.org/all/20210918095637.20108-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-10-24 16:24:28 +02:00
Jakub Kicinski
24f7cf9b85 Quite a few changes:
* the applicable eth_hw_addr_set() and const hw_addr changes
  * various code cleanups/refactorings
  * stack usage reductions across the wireless stack
  * some unstructured find_ie() -> structured find_element()
    changes
  * a few more pieces of multi-BSSID support
  * some 6 GHz regulatory support
  * 6 GHz support in hwsim, for testing userspace code
  * Light Communications (LC, 802.11bb) early band definitions
    to be able to add a first driver soon
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEH1e1rEeCd0AIMq6MB8qZga/fl8QFAmFxi7MACgkQB8qZga/f
 l8SGYA/+IRqIfgIcdQW2XkRZanpYHirS4ZELcB7qH2XDAVLALpZx9h9kVhpVrjmh
 BFYaJz3H5cEfwH6+JSfc7dvYlzUN0oIwzs+s0PpUwK13R/NhqCcP0PSJESBtfk/4
 sxerJAHyWNZ2Ji0dq18m17IEU5IC03y8h3xekzeyl5UOmU72sqvqq3ZT8yQ48bu9
 K4BbTFv5/cPKS8EAiFDGQbzVYz94zj+6XZH/kiN3vnhtqhI7knbvwF5zAafXdZOF
 wnCucHbWcyvwxiqIMPZBUy0nP7p2Lrz24MFbDSUK/9umxO7JNyP6A8KOM5/CwsEF
 u0hcGmW8NSRIkMQZoZi41d0eHZa8iPMv9gRYlSDFvElBR/kPp206zOYgzYj9Fi5g
 zuAISwhzWT06BsfLvKLLjK/xZmxXybOvkdie/vT0VAWHBrGR8FZV5ovfac/Qb9FJ
 RwAuyOKpHP1q+Oy+tQdNpnAVx1W0E/VoHXyT0a+G4cXfHG6wZL6zG1F4/kS/g+wC
 184MpQwxZkliNhuHbHScIARhCBCGxSNvU9R9Kz3vGGS9l+syT8ecl2IQRgEvU6FY
 yo6bryWFWXkE7jtjEZWvnqQMOD1EcQeu66Nvg2LS82twcn/lJ/RlkjaXneeNP2wD
 BZMOk3u0wWgWhm7AcaehT7IuMJi3Q0BYask+ZTA8Uv5eqW7YADg=
 =ZXrI
 -----END PGP SIGNATURE-----

Merge tag 'mac80211-next-for-net-next-2021-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
Quite a few changes:
 * the applicable eth_hw_addr_set() and const hw_addr changes
 * various code cleanups/refactorings
 * stack usage reductions across the wireless stack
 * some unstructured find_ie() -> structured find_element()
   changes
 * a few more pieces of multi-BSSID support
 * some 6 GHz regulatory support
 * 6 GHz support in hwsim, for testing userspace code
 * Light Communications (LC, 802.11bb) early band definitions
   to be able to add a first driver soon

* tag 'mac80211-next-for-net-next-2021-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (35 commits)
  cfg80211: fix kernel-doc for MBSSID EMA
  mac80211: Prevent AP probing during suspend
  nl80211: Add LC placeholder band definition to nl80211_band
  ...
====================

Link: https://lore.kernel.org/r/20211021154953.134849-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-22 10:20:56 -07:00
David S. Miller
bdfa75ad70 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Lots of simnple overlapping additions.

With a build fix from Stephen Rothwell.

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-22 11:41:16 +01:00
Linus Torvalds
6c2c712767 Networking fixes for 5.15-rc7, including fixes from netfilter, and can.
Current release - regressions:
 
  - revert "vrf: reset skb conntrack connection on VRF rcv",
    there are valid uses for previous behavior
 
  - can: m_can: fix iomap_read_fifo() and iomap_write_fifo()
 
 Current release - new code bugs:
 
  - mlx5: e-switch, return correct error code on group creation failure
 
 Previous releases - regressions:
 
  - sctp: fix transport encap_port update in sctp_vtag_verify
 
  - stmmac: fix E2E delay mechanism (in PTP timestamping)
 
 Previous releases - always broken:
 
  - netfilter: ip6t_rt: fix out-of-bounds read of ipv6_rt_hdr
 
  - netfilter: xt_IDLETIMER: fix out-of-bound read caused by lack of init
 
  - netfilter: ipvs: make global sysctl read-only in non-init netns
 
  - tcp: md5: fix selection between vrf and non-vrf keys
 
  - ipv6: count rx stats on the orig netdev when forwarding
 
  - bridge: mcast: use multicast_membership_interval for IGMPv3
 
  - can:
    - j1939: fix UAF for rx_kref of j1939_priv
             abort sessions on receiving bad messages
 
    - isotp: fix TX buffer concurrent access in isotp_sendmsg()
             fix return error on FC timeout on TX path
 
  - ice: fix re-init of RDMA Tx queues and crash if RDMA was not inited
 
  - hns3: schedule the polling again when allocation fails,
    prevent stalls
 
  - drivers: add missing of_node_put() when aborting
    for_each_available_child_of_node()
 
  - ptp: fix possible memory leak and UAF in ptp_clock_register()
 
  - e1000e: fix packet loss in burst mode on Tiger Lake and later
 
  - mlx5e: ipsec: fix more checksum offload issues
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmFxgHwACgkQMUZtbf5S
 IrvFgw//T73aR3B2Xvz5/1rtglfmtcUqFQsyGDXGD5HnfbAbsRcz8vcQ/mTsExl7
 +mJY/ZuQefsD7UQDyg3GNhbgf1+pEjHC81ryeNsfET7+JxgYLD3NEYSBYUqIFZUo
 gStAStGBG+ClQUaqlkGFyyf6GrqwpmxZKRr6F9fUsufQ14m9tvcT/QPcrXL4q7qX
 Fz644yUe/IvKnuJDHJVZsc8UXR9NTPCyCNJT9kVewwPMIMEc/xMOg5QONLZT0TlC
 Zk4XJIqlBBEQWrN/QwrGXm82aO+3gQZyD5K9AvpczgcBjOr6FJOmN6zkQrqNNWaC
 2wPAfWi7DALPtOZR6lCxoeWfLRfdn1ZOn5x2z5xrtAXCV2FTaMg8in9TzJ57qmcb
 /l43QzcNGSj1ytyny8pqgdsX2MSqs0O5VSG4egMtz7TeU/rs7uAx2IVHbPT8CHop
 PvhVHeUeu9lGu+FUK8piQbb5aVpbA9qlOj/rXNrHDIxdA9McQgVs+tljNG4X5KtX
 L7BR84wNg98HtIINVx6RjYz9lOpG1qBuw5RCiqiAaN1RBY7lYAhMaAE6U3azjgC+
 AIz/MacNuAz/oTuutQB6/0WZDDJhy4WEy3TrDLlpQNz6yIrpKFN+ftyF6DuVUSMH
 PmtZ4E/DLooQL5KwuoDdYDH1gSMlggBejeGHTFJ+RUMuvRePZQ8=
 =Hwqr
 -----END PGP SIGNATURE-----

Merge tag 'net-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter, and can.

  We'll have one more fix for a socket accounting regression, it's still
  getting polished. Otherwise things look fine.

  Current release - regressions:

   - revert "vrf: reset skb conntrack connection on VRF rcv", there are
     valid uses for previous behavior

   - can: m_can: fix iomap_read_fifo() and iomap_write_fifo()

  Current release - new code bugs:

   - mlx5: e-switch, return correct error code on group creation failure

  Previous releases - regressions:

   - sctp: fix transport encap_port update in sctp_vtag_verify

   - stmmac: fix E2E delay mechanism (in PTP timestamping)

  Previous releases - always broken:

   - netfilter: ip6t_rt: fix out-of-bounds read of ipv6_rt_hdr

   - netfilter: xt_IDLETIMER: fix out-of-bound read caused by lack of
     init

   - netfilter: ipvs: make global sysctl read-only in non-init netns

   - tcp: md5: fix selection between vrf and non-vrf keys

   - ipv6: count rx stats on the orig netdev when forwarding

   - bridge: mcast: use multicast_membership_interval for IGMPv3

   - can:
      - j1939: fix UAF for rx_kref of j1939_priv abort sessions on
        receiving bad messages

      - isotp: fix TX buffer concurrent access in isotp_sendmsg() fix
        return error on FC timeout on TX path

   - ice: fix re-init of RDMA Tx queues and crash if RDMA was not inited

   - hns3: schedule the polling again when allocation fails, prevent
     stalls

   - drivers: add missing of_node_put() when aborting
     for_each_available_child_of_node()

   - ptp: fix possible memory leak and UAF in ptp_clock_register()

   - e1000e: fix packet loss in burst mode on Tiger Lake and later

   - mlx5e: ipsec: fix more checksum offload issues"

* tag 'net-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits)
  usbnet: sanity check for maxpacket
  net: enetc: make sure all traffic classes can send large frames
  net: enetc: fix ethtool counter name for PM0_TERR
  ptp: free 'vclock_index' in ptp_clock_release()
  sfc: Don't use netif_info before net_device setup
  sfc: Export fibre-specific supported link modes
  net/mlx5e: IPsec: Fix work queue entry ethernet segment checksum flags
  net/mlx5e: IPsec: Fix a misuse of the software parser's fields
  net/mlx5e: Fix vlan data lost during suspend flow
  net/mlx5: E-switch, Return correct error code on group creation failure
  net/mlx5: Lag, change multipath and bonding to be mutually exclusive
  ice: Add missing E810 device ids
  igc: Update I226_K device ID
  e1000e: Fix packet loss on Tiger Lake and later
  e1000e: Separate TGP board type from SPT
  ptp: Fix possible memory leak in ptp_clock_register()
  net: stmmac: Fix E2E delay mechanism
  nfc: st95hf: Make spi remove() callback return zero
  net: hns3: disable sriov before unload hclge layer
  net: hns3: fix vf reset workqueue cannot exit
  ...
2021-10-21 15:36:50 -10:00
Dave Marchevsky
aba64c7da9 bpf: Add verified_insns to bpf_prog_info and fdinfo
This stat is currently printed in the verifier log and not stored
anywhere. To ease consumption of this data, add a field to bpf_prog_aux
so it can be exposed via BPF_OBJ_GET_INFO_BY_FD and fdinfo.

Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20211020074818.1017682-2-davemarchevsky@fb.com
2021-10-21 15:51:47 -07:00
Hengqi Chen
9eeb3aa33a bpf: Add bpf_skc_to_unix_sock() helper
The helper is used in tracing programs to cast a socket
pointer to a unix_sock pointer.
The return value could be NULL if the casting is illegal.

Suggested-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211021134752.1223426-2-hengqi.chen@gmail.com
2021-10-21 15:11:06 -07:00
Geert Uytterhoeven
c353d7ce76 uapi: Add <linux/map_to_14segment.h>
Add a header file providing translation primitives and tables for the
conversion of (ASCII) characters to a 14-segments notation, as used by
14-segment alphanumeric displays.

This follows the spirit of include/uapi/linux/map_to_7segment.h.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2021-10-21 23:36:28 +02:00
Dave Airlie
6f2f7c8330 Merge tag 'drm-intel-gt-next-2021-10-21' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:

- Expose multi-LRC submission interface

  Similar to the bonded submission interface but simplified.
  Comes with GuC only implementation for now. See kerneldoc
  for more details.

  Userspace changes: https://github.com/intel/media-driver/pull/1252

- Expose logical engine instance to user

  Needed by the multi-LRC submission interface for GuC

  Userspace changes: https://github.com/intel/media-driver/pull/1252

Driver Changes:

- Fix blank screen booting crashes when CONFIG_CC_OPTIMIZE_FOR_SIZE=y (Hugh)
- Add support for multi-LRC submission in the GuC backend (Matt B)
- Add extra cache flushing before making pages userspace visible (Matt A, Thomas)
- Mark internal GPU object pages dirty so they will be flushed properly (Matt A)

- Move remaining debugfs interfaces i915_wedged/i915_forcewake_user into gt (Andi)
- Replace the unconditional clflushes with drm_clflush_virt_range() (Ville)
- Remove IS_ACTIVE macro completely (Lucas)
- Improve kerneldocs for cache_dirty (Matt A)

- Add missing includes (Lucas)
- Selftest improvements (Matt R, Ran, Matt A)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YXFmLKoq8Fg9JxSd@jlahtine-mobl.ger.corp.intel.com
2021-10-22 06:30:34 +10:00
Johannes Berg
f9d366d420 cfg80211: fix kernel-doc for MBSSID EMA
The struct member ema_max_profile_periodicity was listed
with the wrong name in the kernel-doc, fix that.

Link: https://lore.kernel.org/r/20211021173038.18ec2030c66b.Iac731bb299525940948adad2c41f514b7dd81c47@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-21 17:34:10 +02:00
Srinivasan Raju
63fa042666 nl80211: Add LC placeholder band definition to nl80211_band
Define LC band which is a draft under IEEE 802.11bb.
Current NL80211_BAND_LC is a placeholder band and
will be more defined IEEE 802.11bb progresses.

Signed-off-by: Srinivasan Raju <srini.raju@purelifi.com>
Link: https://lore.kernel.org/r/20211018100143.7565-2-srini.raju@purelifi.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-21 17:25:17 +02:00
Emmanuel Grumbach
1add667da2 nl80211: vendor-cmd: intel: add more details for IWL_MVM_VENDOR_CMD_HOST_GET_OWNERSHIP
Explain more the expected flow for this command.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://lore.kernel.org/r/20211020051147.29297-1-emmanuel.grumbach@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-21 17:25:17 +02:00
Toke Høiland-Jørgensen
dfcb63ce1d fq_codel: generalise ce_threshold marking for subset of traffic
Commit e72aeb9ee0e3 ("fq_codel: implement L4S style ce_threshold_ect1
marking") expanded the ce_threshold feature of FQ-CoDel so it can
be applied to a subset of the traffic, using the ECT(1) bit of the ECN
field as the classifier. However, hard-coding ECT(1) as the only
classifier for this feature seems limiting, so let's expand it to be more
general.

To this end, change the parameter from a ce_threshold_ect1 boolean, to a
one-byte selector/mask pair (ce_threshold_{selector,mask}) which is applied
to the whole diffserv/ECN field in the IP header. This makes it possible to
classify packets by any value in either the ECN field or the diffserv
field. In particular, setting a selector of INET_ECN_ECT_1 and a mask of
INET_ECN_MASK corresponds to the functionality before this patch, and a
mask of ~INET_ECN_MASK allows using the selector as a straight-forward
match against a diffserv code point:

 # apply ce_threshold to ECT(1) traffic
 tc qdisc replace dev eth0 root fq_codel ce_threshold 1ms ce_threshold_selector 0x1/0x3

 # apply ce_threshold to ECN-capable traffic marked as diffserv AF22
 tc qdisc replace dev eth0 root fq_codel ce_threshold 1ms ce_threshold_selector 0x50/0xfc

Regardless of the selector chosen, the normal rules for ECN-marking of
packets still apply, i.e., the flow must still declare itself ECN-capable
by setting one of the bits in the ECN field to get marked at all.

v2:
- Add tc usage examples to patch description

Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20211019174709.69081-1-toke@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-20 15:24:36 -07:00
Michael Tretter
7aea2c0b48 media: allegro: add control to disable encoder buffer
The encoder buffer can have a negative impact on the quality of the
encoded video.

Add a control to allow user space to disable the encoder buffer per
channel if the VCU supports the encoder buffer but the quality is not
sufficient.

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-20 15:56:40 +01:00
Coly Li
0a2b3e3635 bcache: reserve never used bits from bkey.high
There sre 3 bits in member high of struct bkey are never used, and no
plan to support them in future,
- HEADER_SIZE, start at bit 58, length 2 bits
- KEY_PINNED,  start at bit 55, length 1 bit

No any kernel code, or user space tool references or accesses the three
bits. Therefore it is possible and feasible to reserve the valuable bits
from bkey.high. They can be used in future for other purpose.

Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20211020143812.6403-3-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-20 08:40:54 -06:00
Jason Gunthorpe
71ee1f1275 Merge brank 'mlx5_mkey' into rdma.git for-next
A small series to clean up the mlx5 mkey code across the mlx5_core and
InfiniBand.

* branch 'mlx5_mkey':
  RDMA/mlx5: Attach ndescs to mlx5_ib_mkey
  RDMA/mlx5: Move struct mlx5_core_mkey to mlx5_ib
  RDMA/mlx5: Replace struct mlx5_core_mkey by u32 key
  RDMA/mlx5: Remove pd from struct mlx5_core_mkey
  RDMA/mlx5: Remove size from struct mlx5_core_mkey
  RDMA/mlx5: Remove iova from struct mlx5_core_mkey

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-10-19 14:09:25 -03:00
Kajol Jain
fec9cc6175 perf: Add mem_hops field in perf_mem_data_src structure
Going forward, future generation systems can have more hierarchy
within the node/package level but currently we don't have any data source
encoding field in perf, which can be used to represent this level of data.

Add a new field called 'mem_hops' in the perf_mem_data_src structure
which can be used to represent intra-node/package or inter-node/off-package
details. This field is of size 3 bits where PERF_MEM_HOPS_{NA, 0..6} value
can be used to present different hop levels data.

Also add corresponding macros to define mem_hop field values
and shift value.

Currently we define macro for HOPS_0 which corresponds
to data coming from another core but same node.

For ex: Encodings for mem_hops fields with L2 cache:

L2			- local L2
L2 | REMOTE | HOPS_0	- remote core, same node L2

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20211006140654.298352-3-kjain@linux.ibm.com
2021-10-19 17:27:00 +02:00
Kajol Jain
f4c6217f7f perf: Add comment about current state of PERF_MEM_LVL_* namespace and remove an extra line
Add a comment about PERF_MEM_LVL_* namespace being depricated
to some extent in favour of added PERF_MEM_{LVLNUM_,REMOTE_,SNOOPX_}
fields.

Remove an extra line present in perf_mem__lvl_scnprintf function.

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20211006140654.298352-2-kjain@linux.ibm.com
2021-10-19 17:27:00 +02:00
Pavel Begunkov
6224590d24 io_uring: add flag to not fail link after timeout
For some reason non-off IORING_OP_TIMEOUT always fails links, it's
pretty inconvenient and unnecessary limits chaining after it to hard
linking, which is far from ideal, e.g. doesn't pair well with timeout
cancellation. Add a flag forcing it to not fail links on -ETIME.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/17c7ec0fb7a6113cc6be8cdaedcada0ba836ac0e.1633199723.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-19 05:49:54 -06:00
Greg Kroah-Hartman
be24dd486d This tag contains habanalabs driver changes for v5.16:
- Add a new uAPI (under the memory ioctl) to request from the driver
   to export a DMA-BUF object that represents a memory region on
   the device's DRAM. This is needed to enable peer-to-peer over PCIe
   between habana device and an RDMA adapter (e.g. mlnx5 or efa
   rdma adapter).
 
 - Add debugfs node to dynamically configure CS timeout. Up until now,
   it was only configurable through kernel module parameter.
 
 - Fetch more comprehensive power information from the firmware.
 
 - Always take timestamp when waiting for user interrupt, as the user
   needs that information to optimize the graph runtime compilation.
 
 - Modify user interrupt to look on 64-bit user value as fence, instead
   of 32-bit.
 
 - Bypass reset in case of repeated h/w error event after device reset.
   This is to prevent endless loop of resets to the device.
 
 - Fix several bugs in multi CS completion code.
 
 - Fix race condition in fd close/open.
 
 - Update to latest firmware headers
 
 - Add select CRC32 in kconfig
 
 - Small fixes, cosmetics
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE7TEboABC71LctBLFZR1NuKta54AFAmFtPa4ACgkQZR1NuKta
 54A9NAf/QJOc72XhqinNm62RvUoZQehNyDFHcYYBORqIpC+/NsggWwy0VdrDHSeg
 uXmt6qwRUCc1+tOjOcFD/b6pnwz16mEqQrmVO8XiZOiCvIGcDEapq0HqGfEXwYtv
 NcQ+k682qqXlza6SCZS9/webJzRuhHwxdFP9HTEYLhKmHoOgBza63F6dreku/fEG
 mCDVtnMbo8Sa98657Jz3yTElhA+JPsDYO6PycZUTGdPn38mzz5Y5o6Ds8SshIXbr
 ZQQxHope7NkqcnfYQ8nIoyl7bPLBv2NaqNz216+sBVVy+kHx6f1+FJ4hJM+PHi20
 CuOiUgVBRKp2LJ2k0HoITy5XiXe/Cg==
 =bzK+
 -----END PGP SIGNATURE-----

Merge tag 'misc-habanalabs-next-2021-10-18' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into char-misc-next

Oded writes:

This tag contains habanalabs driver changes for v5.16:

- Add a new uAPI (under the memory ioctl) to request from the driver
  to export a DMA-BUF object that represents a memory region on
  the device's DRAM. This is needed to enable peer-to-peer over PCIe
  between habana device and an RDMA adapter (e.g. mlnx5 or efa
  rdma adapter).

- Add debugfs node to dynamically configure CS timeout. Up until now,
  it was only configurable through kernel module parameter.

- Fetch more comprehensive power information from the firmware.

- Always take timestamp when waiting for user interrupt, as the user
  needs that information to optimize the graph runtime compilation.

- Modify user interrupt to look on 64-bit user value as fence, instead
  of 32-bit.

- Bypass reset in case of repeated h/w error event after device reset.
  This is to prevent endless loop of resets to the device.

- Fix several bugs in multi CS completion code.

- Fix race condition in fd close/open.

- Update to latest firmware headers

- Add select CRC32 in kconfig

- Small fixes, cosmetics

* tag 'misc-habanalabs-next-2021-10-18' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux: (25 commits)
  habanalabs: refactor fence handling in hl_cs_poll_fences
  habanalabs: context cleanup cosmetics
  habanalabs: simplify wait for interrupt with timestamp flow
  habanalabs: initialize hpriv fields before adding new node
  habanalabs: Unify frequency set/get functionality
  habanalabs: select CRC32
  habanalabs: add support for dma-buf exporter
  habanalabs: define uAPI to export FD for DMA-BUF
  habanalabs: fix NULL pointer dereference
  habanalabs: fix race condition in multi CS completion
  habanalabs: use only u32
  habanalabs: update firmware files
  habanalabs: bypass reset for continuous h/w error event
  habanalabs: take timestamp on wait for interrupt
  habanalabs: prevent race between fd close/open
  habanalabs: refactor reset log message
  habanalabs: define soft-reset as inference op
  habanalabs: fix debugfs device memory MMU VA translation
  habanalabs: add support for a long interrupt target value
  habanalabs: remove redundant cs validity checks
  ...
2021-10-19 09:37:59 +02:00
Greg Kroah-Hartman
2b74240be3 First set of counter subsystem new feature support for the 5.16 cycle
Most interesting element this time is the new chrdev based interface
 for the counter subsystem.  Affects all drivers. Some minor precursor
 patches.
 
 Major parts:
 * Bring all the sysfs attribute setup into the counter core rather than
   leaving it to individual drivers.  Docs updates accompany these changes.
 * Move various definitions to a uapi header as now needed from userspace.
 * Add the chardev interface + extensive documentation and example tool
 * Add new ABI needed to identify indexes needed for chrdev interface
 * Implement new interface for the 104-quad-8
 * Follow up deals with wrong path for documentation build
 * Various trivial cleanups and missing feature additions related to this
   series
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmFtvWMRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FohYnQ//U58yVdWHoav81bm08xl38Hv3F1O9Gk1E
 1pWVb2FNn065q9ES9n0YB1UjECRU/4zvEw+5S+vRqfXlbQiUMVvgUSDWWokzK4Zf
 rMxRFeYjzS89A8b+VoTLSxOn5wAWUc67v29HMDl1MiQHG6gP9UW7mxBbCIeIU9Et
 BhNpo32IS9Qu9LeoaPsRz8yEfAyBheLGMfrlJAYy6ENTh4EMdyhzLvVlJXiE+rm7
 8KwFU7XVTdIG8JQxJGSs9/CMd6CGhKaBr+B6LG4rnSZTy5k41a1DXpIBQU24nLns
 ofX+KllTCnuHW5g+rqi05FkNApCN06RCV7FgUKmqOCa4vbXVEF4mFXejkQo+mgIS
 zHy7lLfkiYVNprpKRKZv5lzj1go8cl4OB0F5odyaiRVh8KeCS9UbYe5fV3vLTiY9
 2/yhmW/dbaogM0bFsx8pbWdn84MiBNXT/PvyqJ+I0EfndDZcmrl0mPWQlAS31QPC
 3aS2wKyBt2pjTUQIaPq80xPeWAAVCVQ4IxrV5SLT8BUxJc6YwZUDEMAM+/3oEhFC
 f1/fxqpcctoFEauJXrggiQWpcVbYkbA9RzF+ecUT+3ngABlbf0KOI0+RZnn6GVvJ
 UVM99Dy0q5utkzFXsHZ4FjXhxiW9LcbvU27KbyrZjKJjOoQAs9Ky5uhjt5DKXh4B
 KSofs8zHEs8=
 =AaeD
 -----END PGP SIGNATURE-----

Merge tag 'counter-for-5.16a-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

First set of counter subsystem new feature support for the 5.16 cycle

Most interesting element this time is the new chrdev based interface
for the counter subsystem.  Affects all drivers. Some minor precursor
patches.

Major parts:
* Bring all the sysfs attribute setup into the counter core rather than
  leaving it to individual drivers.  Docs updates accompany these changes.
* Move various definitions to a uapi header as now needed from userspace.
* Add the chardev interface + extensive documentation and example tool
* Add new ABI needed to identify indexes needed for chrdev interface
* Implement new interface for the 104-quad-8
* Follow up deals with wrong path for documentation build
* Various trivial cleanups and missing feature additions related to this
  series

* tag 'counter-for-5.16a-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  docs: counter: Include counter-chrdev kernel-doc to generic-counter.rst
  counter: fix docum. build problems after filename change
  counter: microchip-tcb-capture: Tidy up a false kernel-doc /** marking.
  counter: 104-quad-8: Add IRQ support for the ACCES 104-QUAD-8
  counter: 104-quad-8: Replace mutex with spinlock
  counter: Implement events_queue_size sysfs attribute
  counter: Implement *_component_id sysfs attributes
  counter: Implement signalZ_action_component_id sysfs attribute
  tools/counter: Create Counter tools
  docs: counter: Document character device interface
  counter: Add character device interface
  counter: Move counter enums to uapi header
  docs: counter: Update to reflect sysfs internalization
  counter: Update counter.h comments to reflect sysfs internalization
  counter: Internalize sysfs interface code
  counter: stm32-timer-cnt: Provide defines for slave mode selection
  counter: stm32-lptimer-cnt: Provide defines for clock polarities
2021-10-19 09:08:16 +02:00
Yonghong Song
223f903e9c bpf: Rename BTF_KIND_TAG to BTF_KIND_DECL_TAG
Patch set [1] introduced BTF_KIND_TAG to allow tagging
declarations for struct/union, struct/union field, var, func
and func arguments and these tags will be encoded into
dwarf. They are also encoded to btf by llvm for the bpf target.

After BTF_KIND_TAG is introduced, we intended to use it
for kernel __user attributes. But kernel __user is actually
a type attribute. Upstream and internal discussion showed
it is not a good idea to mix declaration attribute and
type attribute. So we proposed to introduce btf_type_tag
as a type attribute and existing btf_tag renamed to
btf_decl_tag ([2]).

This patch renamed BTF_KIND_TAG to BTF_KIND_DECL_TAG and some
other declarations with *_tag to *_decl_tag to make it clear
the tag is for declaration. In the future, BTF_KIND_TYPE_TAG
might be introduced per [3].

 [1] https://lore.kernel.org/bpf/20210914223004.244411-1-yhs@fb.com/
 [2] https://reviews.llvm.org/D111588
 [3] https://reviews.llvm.org/D111199

Fixes: b5ea834dde6b ("bpf: Support for new btf kind BTF_KIND_TAG")
Fixes: 5b84bd10363e ("libbpf: Add support for BTF_KIND_TAG")
Fixes: 5c07f2fec003 ("bpftool: Add support for BTF_KIND_TAG")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211012164838.3345699-1-yhs@fb.com
2021-10-18 18:35:36 -07:00
Kees Cook
47c662486c treewide: Replace 0-element memcpy() destinations with flexible arrays
The 0-element arrays that are used as memcpy() destinations are actually
flexible arrays. Adjust their structures accordingly so that memcpy()
can better reason able their destination size (i.e. they need to be seen
as "unknown" length rather than "zero").

In some cases, use of the DECLARE_FLEX_ARRAY() helper is needed when a
flexible array is alone in a struct.

Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Manish Rangankar <mrangankar@marvell.com>
Cc: GR-QLogic-Storage-Upstream@marvell.com
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Fabio Aiuto <fabioaiuto83@gmail.com>
Cc: Ross Schmidt <ross.schm.dev@gmail.com>
Cc: Marco Cesati <marcocesati@gmail.com>
Cc: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: linux-staging@lists.linux.dev
Signed-off-by: Kees Cook <keescook@chromium.org>
2021-10-18 12:28:53 -07:00
Kees Cook
fa7845cfd5 treewide: Replace open-coded flex arrays in unions
In support of enabling -Warray-bounds and -Wzero-length-bounds and
correctly handling run-time memcpy() bounds checking, replace all
open-coded flexible arrays (i.e. 0-element arrays) in unions with the
DECLARE_FLEX_ARRAY() helper macro.

This fixes warnings such as:

fs/hpfs/anode.c: In function 'hpfs_add_sector_to_btree':
fs/hpfs/anode.c:209:27: warning: array subscript 0 is outside the bounds of an interior zero-length array 'struct bplus_internal_node[0]' [-Wzero-length-bounds]
  209 |    anode->btree.u.internal[0].down = cpu_to_le32(a);
      |    ~~~~~~~~~~~~~~~~~~~~~~~^~~
In file included from fs/hpfs/hpfs_fn.h:26,
                 from fs/hpfs/anode.c:10:
fs/hpfs/hpfs.h:412:32: note: while referencing 'internal'
  412 |     struct bplus_internal_node internal[0]; /* (internal) 2-word entries giving
      |                                ^~~~~~~~

drivers/net/can/usb/etas_es58x/es58x_fd.c: In function 'es58x_fd_tx_can_msg':
drivers/net/can/usb/etas_es58x/es58x_fd.c:360:35: warning: array subscript 65535 is outside the bounds of an interior zero-length array 'u8[0]' {aka 'unsigned char[]'} [-Wzero-length-bounds]
  360 |  tx_can_msg = (typeof(tx_can_msg))&es58x_fd_urb_cmd->raw_msg[msg_len];
      |                                   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/net/can/usb/etas_es58x/es58x_core.h:22,
                 from drivers/net/can/usb/etas_es58x/es58x_fd.c:17:
drivers/net/can/usb/etas_es58x/es58x_fd.h:231:6: note: while referencing 'raw_msg'
  231 |   u8 raw_msg[0];
      |      ^~~~~~~

Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ayush Sawal <ayush.sawal@chelsio.com>
Cc: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Cc: Rohit Maheshwari <rohitm@chelsio.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Stanislaw Gruszka <stf_xl@wp.pl>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Mordechay Goodstein <mordechay.goodstein@intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Arunachalam Santhanam <arunachalam.santhanam@in.bosch.com>
Cc: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Cc: linux-crypto@vger.kernel.org
Cc: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: linux-can@vger.kernel.org
Cc: bpf@vger.kernel.org
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # drivers/net/can/usb/etas_es58x/*
Signed-off-by: Kees Cook <keescook@chromium.org>
2021-10-18 12:28:53 -07:00
Kees Cook
3080ea5553 stddef: Introduce DECLARE_FLEX_ARRAY() helper
There are many places where kernel code wants to have several different
typed trailing flexible arrays. This would normally be done with multiple
flexible arrays in a union, but since GCC and Clang don't (on the surface)
allow this, there have been many open-coded workarounds, usually involving
neighboring 0-element arrays at the end of a structure. For example,
instead of something like this:

struct thing {
	...
	union {
		struct type1 foo[];
		struct type2 bar[];
	};
};

code works around the compiler with:

struct thing {
	...
	struct type1 foo[0];
	struct type2 bar[];
};

Another case is when a flexible array is wanted as the single member
within a struct (which itself is usually in a union). For example, this
would be worked around as:

union many {
	...
	struct {
		struct type3 baz[0];
	};
};

These kinds of work-arounds cause problems with size checks against such
zero-element arrays (for example when building with -Warray-bounds and
-Wzero-length-bounds, and with the coming FORTIFY_SOURCE improvements),
so they must all be converted to "real" flexible arrays, avoiding warnings
like this:

fs/hpfs/anode.c: In function 'hpfs_add_sector_to_btree':
fs/hpfs/anode.c:209:27: warning: array subscript 0 is outside the bounds of an interior zero-length array 'struct bplus_internal_node[0]' [-Wzero-length-bounds]
  209 |    anode->btree.u.internal[0].down = cpu_to_le32(a);
      |    ~~~~~~~~~~~~~~~~~~~~~~~^~~
In file included from fs/hpfs/hpfs_fn.h:26,
                 from fs/hpfs/anode.c:10:
fs/hpfs/hpfs.h:412:32: note: while referencing 'internal'
  412 |     struct bplus_internal_node internal[0]; /* (internal) 2-word entries giving
      |                                ^~~~~~~~

drivers/net/can/usb/etas_es58x/es58x_fd.c: In function 'es58x_fd_tx_can_msg':
drivers/net/can/usb/etas_es58x/es58x_fd.c:360:35: warning: array subscript 65535 is outside the bounds of an interior zero-length array 'u8[0]' {aka 'unsigned char[]'} [-Wzero-length-bounds]
  360 |  tx_can_msg = (typeof(tx_can_msg))&es58x_fd_urb_cmd->raw_msg[msg_len];
      |                                   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/net/can/usb/etas_es58x/es58x_core.h:22,
                 from drivers/net/can/usb/etas_es58x/es58x_fd.c:17:
drivers/net/can/usb/etas_es58x/es58x_fd.h:231:6: note: while referencing 'raw_msg'
  231 |   u8 raw_msg[0];
      |      ^~~~~~~

However, it _is_ entirely possible to have one or more flexible arrays
in a struct or union: it just has to be in another struct. And since it
cannot be alone in a struct, such a struct must have at least 1 other
named member -- but that member can be zero sized. Wrap all this nonsense
into the new DECLARE_FLEX_ARRAY() in support of having flexible arrays
in unions (or alone in a struct).

As with struct_group(), since this is needed in UAPI headers as well,
implement the core there, with a non-UAPI wrapper.

Additionally update kernel-doc to understand its existence.

https://github.com/KSPP/linux/issues/137

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2021-10-18 12:28:52 -07:00
Oliver Upton
c68dc1b577 KVM: x86: Report host tsc and realtime values in KVM_GET_CLOCK
Handling the migration of TSCs correctly is difficult, in part because
Linux does not provide userspace with the ability to retrieve a (TSC,
realtime) clock pair for a single instant in time. In lieu of a more
convenient facility, KVM can report similar information in the kvm_clock
structure.

Provide userspace with a host TSC & realtime pair iff the realtime clock
is based on the TSC. If userspace provides KVM_SET_CLOCK with a valid
realtime value, advance the KVM clock by the amount of elapsed time. Do
not step the KVM clock backwards, though, as it is a monotonic
oscillator.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210916181538.968978-5-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-18 14:43:44 -04:00
Alexandre Belloni
0d20e9fb12 rtc: add BSM parameter
BSM or Backup Switch Mode is a common feature on RTCs, allowing to select
how the RTC will decide when to switch from its primary power supply to the
backup power supply. It is necessary to be able to set it from userspace as
there are uses cases where it has to be done dynamically.

Supported values are:
  RTC_BSM_DISABLED: disabled
  RTC_BSM_DIRECT: switching will happen as soon as Vbackup > Vdd
  RTC_BSM_LEVEL: switching will happen around a threshold, usually with an
  hysteresis
  RTC_BSM_STANDBY: switching will not happen until Vdd > Vbackup, this is
  useful to ensure the RTC doesn't draw any power until the device is first
  powered on.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211018151933.76865-6-alexandre.belloni@bootlin.com
2021-10-18 17:20:50 +02:00