IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Number of files depend on linux/sched/clock.h getting included
by linux/skbuff.h which soon will no longer be the case.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This include was added for skb_find_text() but all we need there
is a forward declaration of struct ts_config.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/checksum.h pulls in linux/uaccess.h which is large.
In the x86 header the include seems to not be needed at all.
ARM on the other hand does not include uaccess.h, even tho
it calls access_ok().
In the generic implementation guard the include of linux/uaccess.h
with the same condition as the code that needs it.
With this change pre-processed net/checksum.h shrinks on x86
from 30616 lines to just 1193.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
It appears nothing needs it. The kernel builds fine with this
include removed, building an otherwise empty source file with:
#include <linux/skbuff.h>
#ifdef _LINUX_NET_H
#error linux/net.h is back
#endif
works too (meaning net.h is not just pulled in indirectly).
This gives us a slight 0.5% reduction in the pre-processed size
of skbuff.h.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
linux/net.h will soon not be included by linux/skbuff.h.
Fix the cases where source files were depending on the implicit
include.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder says:
====================
net: ipa: abstract status parsing
Under some circumstances, IPA generates a "packet status" structure
that describes information about a packet. This is used, for
example, when offload hardware detects an error in a packet, or
otherwise discovers a packet needs special handling. In this case,
the status is delivered (along with the packet it describes) to a
"default" endpoint so that it can be handled by the AP.
Until now, the structure of this status information hasn't changed.
However, to support more than 32 endpoints, this structure required
some changes, such that some fields are rearranged in ways that are
tricky to represent using C code.
This series updates code related to the IPA status structure. The
first patch uses a local variable to avoid recomputing a packet
length more than once. The second stops using sizeof() to determine
the size of an IPA packet status structure. Patches 3-5 extend the
definitions for values held in packet status fields. Patch 6 does a
little general cleanup to make patch 7 simpler. Patch 7 stops using
a C structure to represent packet status; instead, a new function
fetches values "by name" from a buffer containing such a structure.
The last patch updates this function so it also supports IPA v5.0+.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Update ipa_status_extract() to support IPA v5.0 and beyond. Because
the format of the IPA packet status depends on the version, pass an
IPA pointer to the function.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stop assuming the IPA packet status has a fixed format (defined by
a C structure). Instead, use a function to extract each field from
a block of data interpreted as an IPA packet status. Define an
enumerated type that identifies the fields that can be extracted.
The current function extracts fields based on the existing
ipa_status structure format (which is no longer used).
Define IPA_STATUS_RULE_MISS, to replace the calls to field_max() to
represent that condition; those depended on the knowing the width of
a filter or router rule in the IPA packet status structure.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The next patch reworks how the IPA packet status structure is
interpreted. This patch does some preparatory work, to make it
easier to see the effect of that change:
- Change a few functions that access fields in a IPA packet status
structure to store field values in local variables with names
related to the field.
- Pass a void pointer rather than an (equivalent) status pointer
to two functions called by ipa_endpoint_status_parse().
- Use "rule" rather than "val" as the name of a variable that
holds a routing rule ID.
- Consistently use "IPA packet status" rather than "status
element" when referring to this data structure.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Define the remaining values for opcode and exception fields in the
IPA packet status structure. Most of these values are powers-of-2,
suggesting they are meant to be used as bitmasks, but that is not
the case. Add comments to be clear about this, and express the
values in decimal format.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename the ipa_nat_en enumerated type to be ipa_nat_type, and rename
its symbols accordingly. Add a comment indicating those values are
also used in the IPA status nat_type field.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a 16 bit status mask defined in the IPA packet status
structure, of which only one (TAG_VALID) is currently used.
Define all other IPA status mask values in an enumerated type whose
numeric values are bit mask values (in CPU byte order) in the status
mask. Use the TAG_VALID value from that type rather than defining a
separate field mask.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The IPA packet status structure changes in IPA v5.0 in ways that are
difficult to represent cleanly. As a small step toward redefining
it as a parsed block of data, use a constant to define its size,
rather than the size of the IPA status structure type.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The packet length encoded in an IPA packet status buffer is computed
more than once in ipa_endpoint_status_parse(). It is also checked
again in ipa_endpoint_status_skip(), which that function calls.
Compute the length once, and use that computed value later rather
than recomputing it. Check for it being zero in the parse function
rather than in ipa_endpoint_status_skip().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The build system currently complains:
scripts/Makefile.build:252: drivers/net/dsa/ocelot/Makefile:
felix.o is added to multiple modules: mscc_felix mscc_seville
Since felix.c holds the DSA glue layer, create a mscc_felix_dsa_lib.ko.
This is similar to how mscc_ocelot_switch_lib.ko holds a library for
configuring the hardware.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Colin Foster <colin.foster@in-advantage.com>
Link: https://lore.kernel.org/r/20230125145716.271355-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
virtchnl: update and refactor
Jesse Brandeburg says:
The virtchnl.h file is used by i40e/ice physical function (PF) drivers
and irdma when talking to the iavf driver. This series cleans up the
header file by removing unused elements, adding/cleaning some comments,
fixing the data structures so they are explicitly defined, including
padding, and finally does a long overdue rename of the IWARP members in
the structures to RDMA, since the ice driver and it's associated Intel
Ethernet E800 series adapters support both RDMA and IWARP.
The whole series should result in no functional change, but hopefully
clearer code.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
virtchnl: i40e/iavf: rename iwarp to rdma
virtchnl: do structure hardening
virtchnl: update header and increase header clarity
virtchnl: remove unused structure declaration
====================
Link: https://lore.kernel.org/r/20230125212441.4030014-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
tools: ynl: prevent reorder and fix flags
Some codegen improvements for YAML specs.
First, Lorenzon discovered when switching the XDP feature family
to use flags instead of pure enum that the kdoc got garbled.
The support for enum and flags is therefore unified.
Second when regenerating all families we discussed so far I noticed
that some netlink policies jumped around. We need to ensure we don't
render code based on their ordering in a hash.
====================
Link: https://lore.kernel.org/r/20230126000235.1085551-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When rendering code we should walk the ops in the order in which
they are declared in the spec. This is both more intuitive and
prevents code from jumping around when hashing in the dict changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ops_list contains all the operations, but the main iteration use
case is to walk only ops which define attrs. Rename ops_list to
msg_list, because now it looks like the contents are the same,
just the format is different. While at it convert from tuple
to just keys, none of the users care about the name of the op.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lorenzo reports that after switching from enum to flags netdev
family lost ability to render kdoc (and the enum contents got
generally garbled).
Combine the flags and enum handling in uAPI handling.
Reported-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Leon Romanovsky says:
====================
Convert drivers to return XFRM configuration errors through extack
This series continues effort started by Sabrina to return XFRM configuration
errors through extack. It allows for user space software stack easily present
driver failure reasons to users.
As a note, Intel drivers have a path where extack is equal to NULL, and error
prints won't be available in current patchset. If it is needed, it can be
changed by adding special to Intel macro to print to dmesg in case of
extack == NULL.
====================
Link: https://lore.kernel.org/r/cover.1674560845.git.leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rely on extack to return failure reason.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Almost all validation logic is in the drivers, but they are
missing reliable way to convey failure reason to userspace
applications.
Let's use extack to return this information to users.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Almost all validation logic is in the drivers, but they are
missing reliable way to convey failure reason to userspace
applications.
Let's use extack to return this information to users.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ethtool_aggregate_*_stats() are implemented in net/ethtool/stats.c, a
file which is compiled out when CONFIG_ETHTOOL_NETLINK=n. In order to
avoid adding Kbuild dependencies from drivers (which call these helpers)
on CONFIG_ETHTOOL_NETLINK, let's add some shim definitions which simply
make the helpers dead code.
This means the function prototypes should have been located in
include/linux/ethtool_netlink.h rather than include/linux/ethtool.h.
Fixes: 449c5459641a ("net: ethtool: add helpers for aggregate statistics")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230125110214.4127759-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Matthieu Baerts says:
====================
mptcp: add mixed v4/v6 support for the in-kernel PM
Before these patches, the in-kernel Path-Manager would not allow, for
the same MPTCP connection, having a mix of subflows in v4 and v6.
MPTCP's RFC 8684 doesn't forbid that and it is even recommended to do so
as the path in v4 and v6 are likely different. Some networks are also
v4 or v6 only, we cannot assume they all have both v4 and v6 support.
Patch 1 then removes this artificial constraint in the in-kernel PM
currently enforcing there are no mixed subflows in place, either in
address announcement or in subflow creation areas.
Patch 2 makes sure the sk_ipv6only attribute is also propagated to
subflows, just in case a new PM wouldn't respect it.
Some selftests have also been added for the in-kernel PM (patch 3).
Patches 4 to 8 are just some cleanups and small improvements in the
printed messages in the userspace PM. It is not linked to the rest but
identified when working on a related patch modifying this selftest,
already in -net:
commit 4656d72c1efa ("selftests: mptcp: userspace: validate v4-v6 subflows mix")
---
====================
Link: https://lore.kernel.org/r/20230123-upstream-net-next-pm-v4-v6-v1-0-43fac502bfbf@tessares.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
During the cleanup phase, the server pids were killed with a SIGTERM
directly, not using a SIGUSR1 first to quit safely. As a result, this
test was often ending with two error messages:
read: Connection reset by peer
While at it, use a for-loop to terminate all the PIDs the same way.
Also the different files are now removed after having killed the PIDs
using them. It makes more sense to do that in this order.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Before, only '[FAIL]' was printed in case of error during the validation
phase.
Now, in case of failure, the variable name, its value and expected one
are displayed to help understand what was wrong.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Instead of having a long list of conditions to check, it is possible to
give a list of variable names to compare with their 'e_XXX' version.
This will ease the introduction of the following commit which will print
which condition has failed (if any).
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This script is running a few tests after having setup the environment.
Printing titles helps understand what is being tested.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Like in all other functions in this file, a single point of exit is used
when extra operations are needed: unlock, decrement refcount, etc.
There is no functional change for the moment but it is better to do the
same here to make sure all cleanups are done in case of intermediate
errors.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Note that we can't guess the listener family anymore based on the client
target address: always use IPv6.
The fullmesh flag with endpoints from different families is also
validated here.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Usually, attributes are propagated to subflows as well.
Here, if subflows are created by other ways than the MPTCP path-manager,
it is important to make sure they are in v6 if it is asked by the
userspace.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently the in-kernel PM arbitrary enforces that created subflow's
family must match the main MPTCP socket while the RFC allows mixing
IPv4 and IPv6 subflows.
This patch changes the in-kernel PM logic to create subflows matching
the currently selected source (or destination) address. IPv4 sockets
can pick only IPv4 addresses (and v4 mapped in v6), while IPv6 sockets
not restricted to V6ONLY can pick either IPv4 and IPv6 addresses as
long as the source and destination matches.
A helper, previously introduced is used to ease family matching checks,
taking care of IPv4 vs IPv4-mapped-IPv6 vs IPv6 only addresses.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/269
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There are multiple ICMP rate limiting mechanisms:
* Global limits: net.ipv4.icmp_msgs_burst/icmp_msgs_per_sec
* v4 per-host limits: net.ipv4.icmp_ratelimit/ratemask
* v6 per-host limits: net.ipv6.icmp_ratelimit/ratemask
However, when ICMP output is limited, there is no way to tell
which limit has been hit or even if the limits are responsible
for the lack of ICMP output.
Add counters for each of the cases above. As we are within
local_bh_disable(), use the __INC stats variant.
Example output:
# nstat -sz "*RateLimit*"
IcmpOutRateLimitGlobal 134 0.0
IcmpOutRateLimitHost 770 0.0
Icmp6OutRateLimitHost 84 0.0
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Suggested-by: Abhishek Rawal <rawal.abhishek92@gmail.com>
Link: https://lore.kernel.org/r/273b32241e6b7fdc5c609e6f5ebc68caf3994342.1674605770.git.jamie.bainbridge@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Steen Hegelund says:
====================
Adding Sparx5 IS0 VCAP support
This provides the Ingress Stage 0 (IS0) VCAP (Versatile Content-Aware
Processor) support for the Sparx5 platform.
The IS0 VCAP (also known in the datasheet as CLM) is a classifier VCAP that
mainly extracts frame information to metadata that follows the frame in the
Sparx5 processing flow all the way to the egress port.
The IS0 VCAP has 4 lookups and they are accessible with a TC chain id:
- chain 1000000: IS0 Lookup 0
- chain 1100000: IS0 Lookup 1
- chain 1200000: IS0 Lookup 2
- chain 1300000: IS0 Lookup 3
- chain 1400000: IS0 Lookup 4
- chain 1500000: IS0 Lookup 5
Each of these lookups have their own port keyset configuration that decides
which keys will be used for matching on which traffic type.
The IS0 VCAP has these traffic classifications:
- IPv4 frames
- IPv6 frames
- Unicast MPLS frames (ethertype = 0x8847)
- Multicast MPLS frames (ethertype = 0x8847)
- Other frame types than MPLS, IPv4 and IPv6
The IS0 VCAP has an action that allows setting the value of a PAG (Policy
Association Group) key field in the frame metadata, and this can be used
for matching in an IS2 VCAP rule.
This allow rules in the IS0 VCAP to be linked to rules in the IS2 VCAP.
The linking is exposed by using the TC "goto chain" action with an offset
from the IS2 chain ids.
As an example a "goto chain 8000001" will use a PAG value of 1 to chain to
a rule in IS2 Lookup 0.
====================
Link: https://lore.kernel.org/r/20230124104511.293938-1-steen.hegelund@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This adds support for parsing and matching on the CVLAN tags in the Sparx5
IS0 VCAP.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This allows the IS0 VCAP to have its own list of supported ethernet
protocol types matching what is supported by the VCAPs port lookup
classification.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
With more than one possible actionset in a VCAP instance, the VCAP API will
now use the actions in a VCAP rule to select the actionset that fits these
actions the best possible way.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This allows rules to be chained between VCAP instances, e.g. from IS0
Lookup 0 to IS0 Lookup 1, or from one of the IS0 Lookups to one of the IS2
Lookups.
Chaining from an IS2 Lookup to another IS2 Lookup is not supported in the
hardware.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This enables the TC command to use the Sparx5 IS0 VCAP
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This adds the actionset type id to the rule information. This is needed as
we now have more than one actionset in a VCAP instance (IS0).
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This adds the IS0 VCAP port keyset configuration for Sparx5 and also
updates the debugFS support to show the keyset configuration.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
