IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit ffc2760bcf2dba0dbef74013ed73eea8310cc52c ]
Fix a couple of issues with the way we map and copy the vendor string:
- we map only 2 bytes, which usually works since you get at least a
page, but if the vendor string happens to cross a page boundary,
a crash will result
- only call early_memunmap() if early_memremap() succeeded, or we will
call it with a NULL address which it doesn't like,
- while at it, switch to early_memremap_ro(), and array indexing rather
than pointer dereferencing to read the CHAR16 characters.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Matthew Garrett <mjg59@google.com>
Cc: linux-efi@vger.kernel.org
Fixes: 5b83683f32b1 ("x86: EFI runtime service support")
Link: https://lkml.kernel.org/r/20200103113953.9571-5-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a23680594da7a9e2696dbcf4f023e9273e2fa40b ]
Suspending Goodix touchscreens requires changing the interrupt pin to
output before sending them a power-down command. Followed by wiggling
the interrupt pin to wake the device up, after which it is put back
in input mode.
On Bay Trail devices with a Goodix touchscreen direct-irq mode is used
in combination with listing the pin as a normal GpioIo resource.
This works fine, until the goodix driver gets rmmod-ed and then insmod-ed
again. In this case byt_gpio_disable_free() calls
byt_gpio_clear_triggering() which clears the IRQ flags and after that the
(direct) IRQ no longer triggers.
This commit fixes this by adding a check for the BYT_DIRECT_IRQ_EN flag
to byt_gpio_clear_triggering().
Note that byt_gpio_clear_triggering() only gets called from
byt_gpio_disable_free() for direct-irq enabled pins, as these are excluded
from the irq_valid mask by byt_init_irq_valid_mask().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb6d42061a05d71dd73f620582d9e09c8fbf7f5b ]
The driver may sleep while holding a spinlock.
The function call path (from bottom to top) in Linux 4.19 is:
drivers/media/platform/sti/bdisp/bdisp-hw.c, 385:
msleep in bdisp_hw_reset
drivers/media/platform/sti/bdisp/bdisp-v4l2.c, 341:
bdisp_hw_reset in bdisp_device_run
drivers/media/platform/sti/bdisp/bdisp-v4l2.c, 317:
_raw_spin_lock_irqsave in bdisp_device_run
To fix this bug, msleep() is replaced with udelay().
This bug is found by a static analysis tool STCheck written by myself.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e36eaf94be8f7bc4e686246eed3cf92d845e2ef8 ]
The driver may sleep while holding a spinlock.
The function call path (from bottom to top) in Linux 4.19 is:
drivers/gpio/gpio-grgpio.c, 261:
request_irq in grgpio_irq_map
drivers/gpio/gpio-grgpio.c, 255:
_raw_spin_lock_irqsave in grgpio_irq_map
drivers/gpio/gpio-grgpio.c, 318:
free_irq in grgpio_irq_unmap
drivers/gpio/gpio-grgpio.c, 299:
_raw_spin_lock_irqsave in grgpio_irq_unmap
request_irq() and free_irq() can sleep at runtime.
To fix these bugs, request_irq() and free_irq() are called without
holding the spinlock.
These bugs are found by a static analysis tool STCheck written by myself.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Link: https://lore.kernel.org/r/20191218132605.10594-1-baijiaju1990@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b5b9997b331e77ce967eba2c4bc80dc3134a7fe ]
On pseries there is a bug with adding hotplugged devices to an IOMMU
group. For a number of dumb reasons fixing that bug first requires
re-working how VFs are configured on PowerNV. For background, on
PowerNV we use the pcibios_sriov_enable() hook to do two things:
1. Create a pci_dn structure for each of the VFs, and
2. Configure the PHB's internal BARs so the MMIO range for each VF
maps to a unique PE.
Roughly speaking a PE is the hardware counterpart to a Linux IOMMU
group since all the devices in a PE share the same IOMMU table. A PE
also defines the set of devices that should be isolated in response to
a PCI error (i.e. bad DMA, UR/CA, AER events, etc). When isolated all
MMIO and DMA traffic to and from devicein the PE is blocked by the
root complex until the PE is recovered by the OS.
The requirement to block MMIO causes a giant headache because the P8
PHB generally uses a fixed mapping between MMIO addresses and PEs. As
a result we need to delay configuring the IOMMU groups for device
until after MMIO resources are assigned. For physical devices (i.e.
non-VFs) the PE assignment is done in pcibios_setup_bridge() which is
called immediately after the MMIO resources for downstream
devices (and the bridge's windows) are assigned. For VFs the setup is
more complicated because:
a) pcibios_setup_bridge() is not called again when VFs are activated, and
b) The pci_dev for VFs are created by generic code which runs after
pcibios_sriov_enable() is called.
The work around for this is a two step process:
1. A fixup in pcibios_add_device() is used to initialised the cached
pe_number in pci_dn, then
2. A bus notifier then adds the device to the IOMMU group for the PE
specified in pci_dn->pe_number.
A side effect fixing the pseries bug mentioned in the first paragraph
is moving the fixup out of pcibios_add_device() and into
pcibios_bus_add_device(), which is called much later. This results in
step 2. failing because pci_dn->pe_number won't be initialised when
the bus notifier is run.
We can fix this by removing the need for the fixup. The PE for a VF is
known before the VF is even scanned so we can initialise
pci_dn->pe_number pcibios_sriov_enable() instead. Unfortunately,
moving the initialisation causes two problems:
1. We trip the WARN_ON() in the current fixup code, and
2. The EEH core clears pdn->pe_number when recovering a VF and
relies on the fixup to correctly re-set it.
The only justification for either of these is a comment in
eeh_rmv_device() suggesting that pdn->pe_number *must* be set to
IODA_INVALID_PE in order for the VF to be scanned. However, this
comment appears to have no basis in reality. Both bugs can be fixed by
just deleting the code.
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191028085424.12006-1-oohall@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1451d5ae351d938a0ab1677498c893f17b9ee21d ]
This driver supports both the mt9v032 (color) and the mt9v022 (mono)
sensors. Depending on which sensor is used, the format from the sensor is
different. The format.code inside the dev struct holds this information.
The enum mbus and enum frame sizes need to take into account both type of
sensors, not just the color one. To solve this, use the format.code in
these functions instead of the hardcoded bayer color format (which is only
used for mt9v032).
[Sakari Ailus: rewrapped commit message]
Suggested-by: Wenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c911fe799d1c338d94b78e7182ad452c37af897 ]
In the probe function, some resources are allocated using 'dma_alloc_wc()',
they should be released with 'dma_free_wc()', not 'dma_free_coherent()'.
We already use 'dma_free_wc()' in the remove function, but not in the
error handling path of the probe function.
Also, remove a useless 'PAGE_ALIGN()'. 'info->fix.smem_len' is already
PAGE_ALIGNed.
Fixes: 638772c7553f ("fb: add support of LCD display controller on pxa168/910 (base layer)")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Lubomir Rintel <lkundrak@v3.sk>
CC: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190831100024.3248-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 55b1cb1f03ad5eea39897d0c74035e02deddcff2 ]
pinmux_func_gpios[] contains a hole due to the missing function GPIO
definition for the "CTX0&CTX1" signal, which is the logical "AND" of the
two CAN outputs.
Fix this by:
- Renaming CRX0_CRX1_MARK to CTX0_CTX1_MARK, as PJ2MD[2:0]=010
configures the combined "CTX0&CTX1" output signal,
- Renaming CRX0X1_MARK to CRX0_CRX1_MARK, as PJ3MD[1:0]=10 configures
the shared "CRX0/CRX1" input signal, which is fed to both CAN
inputs,
- Adding the missing function GPIO definition for "CTX0&CTX1" to
pinmux_func_gpios[],
- Moving all CAN enums next to each other.
See SH7262 Group, SH7264 Group User's Manual: Hardware, Rev. 4.00:
[1] Figure 1.2 (3) (Pin Assignment for the SH7264 Group (1-Mbyte
Version),
[2] Figure 1.2 (4) Pin Assignment for the SH7264 Group (640-Kbyte
Version,
[3] Table 1.4 List of Pins,
[4] Figure 20.29 Connection Example when Using This Module as 1-Channel
Module (64 Mailboxes x 1 Channel),
[5] Table 32.10 Multiplexed Pins (Port J),
[6] Section 32.2.30 (3) Port J Control Register 0 (PJCR0).
Note that the last 2 disagree about PJ2MD[2:0], which is probably the
root cause of this bug. But considering [4], "CTx0&CTx1" in [5] must
be correct, and "CRx0&CRx1" in [6] must be wrong.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191218194812.12741-4-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c26a2c2ddc0115eb088873f5c309cf46b982f522 ]
The driver wrongly assumes that it is the only entity that can set the
SKBTX_IN_PROGRESS bit of the current skb. Therefore, in the
gfar_clean_tx_ring function, where the TX timestamp is collected if
necessary, the aforementioned bit is used to discriminate whether or not
the TX timestamp should be delivered to the socket's error queue.
But a stacked driver such as a DSA switch can also set the
SKBTX_IN_PROGRESS bit, which is actually exactly what it should do in
order to denote that the hardware timestamping process is undergoing.
Therefore, gianfar would misinterpret the "in progress" bit as being its
own, and deliver a second skb clone in the socket's error queue,
completely throwing off a PTP process which is not expecting to receive
it, _even though_ TX timestamping is not enabled for gianfar.
There have been discussions [0] as to whether non-MAC drivers need or
not to set SKBTX_IN_PROGRESS at all (whose purpose is to avoid sending 2
timestamps, a sw and a hw one, to applications which only expect one).
But as of this patch, there are at least 2 PTP drivers that would break
in conjunction with gianfar: the sja1105 DSA switch and the felix
switch, by way of its ocelot core driver.
So regardless of that conclusion, fix the gianfar driver to not do stuff
based on flags set by others and not intended for it.
[0]: https://www.spinics.net/lists/netdev/msg619699.html
Fixes: f0ee7acfcdd4 ("gianfar: Add hardware TX timestamping support")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 216b44000ada87a63891a8214c347e05a4aea8fe ]
The brcmu_pkt_buf_free_skb() function frees "pkt" so it leads to a
static checker warning:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:1974 brcmf_sdio_readframes()
error: dereferencing freed memory 'pkt'
It looks like there was supposed to be a continue after we free "pkt".
Fixes: 4754fceeb9a6 ("brcmfmac: streamline SDIO read frame routine")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45178ac0cea853fe0e405bf11e101bdebea57b15 ]
Paul reported a very sporadic, rcutorture induced, workqueue failure.
When the planets align, the workqueue rescuer's self-migrate fails and
then triggers a WARN for running a work on the wrong CPU.
Tejun then figured that set_cpus_allowed_ptr()'s stop_one_cpu() call
could be ignored! When stopper->enabled is false, stop_machine will
insta complete the work, without actually doing the work. Worse, it
will not WARN about this (we really should fix this).
It turns out there is a small window where a freshly online'ed CPU is
marked 'online' but doesn't yet have the stopper task running:
BP AP
bringup_cpu()
__cpu_up(cpu, idle) --> start_secondary()
...
cpu_startup_entry()
bringup_wait_for_ap()
wait_for_ap_thread() <-- cpuhp_online_idle()
while (1)
do_idle()
... available to run kthreads ...
stop_machine_unpark()
stopper->enable = true;
Close this by moving the stop_machine_unpark() into
cpuhp_online_idle(), such that the stopper thread is ready before we
start the idle loop and schedule.
Reported-by: "Paul E. McKenney" <paulmck@kernel.org>
Debugged-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd1a5e521c3c083bb43ea731aae0f8b95f12b9bd ]
psbfb_probe performs an evaluation of the required size from the stolen
GTT memory, but gets it wrong in two distinct ways:
- The resulting size must be page-size-aligned;
- The size to allocate is derived from the surface dimensions, not the fb
dimensions.
When two connectors are connected with different modes, the smallest will
be stored in the fb dimensions, but the size that needs to be allocated must
match the largest (surface) dimensions. This is what is used in the actual
allocation code.
Fix this by correcting the evaluation to conform to the two points above.
It allows correctly switching to 16bpp when one connector is e.g. 1920x1080
and the other is 1024x768.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107153048.843881-1-paul.kocialkowski@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit 57211b7366cc2abf784c35e537b256e7fcddc91e.
This patch isn't needed on 4.19 and older.
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 35a79a63517981a8aea395497c548776347deda8 upstream.
alloc_workqueue is not checked for errors and as a result a potential
NULL dereference could occur.
Link: https://lore.kernel.org/r/1568824618-4366-1-git-send-email-allen.pais@oracle.com
Signed-off-by: Allen Pais <allen.pais@oracle.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[Ajay: Rewrote this patch for v4.9.y, as 4.9.y codebase is different from mainline]
Signed-off-by: Ajay Kaher <akaher@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e8294f2f6aa6208ed0923aa6d70cea3be178309a ]
There's no logged information about tree-log replay although this is
something that points to previous unclean unmount. Other filesystems
report that as well.
Suggested-by: Chris Murphy <lists@colorremedies.com>
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c96dceeabf765d0b1b1f29c3bf50a5c01315b820 ]
Commit 904cdbd41d74 ("jbd2: clear dirty flag when revoking a buffer from
an older transaction") set the BH_Freed flag when forgetting a metadata
buffer which belongs to the committing transaction, it indicate the
committing process clear dirty bits when it is done with the buffer. But
it also clear the BH_Mapped flag at the same time, which may trigger
below NULL pointer oops when block_size < PAGE_SIZE.
rmdir 1 kjournald2 mkdir 2
jbd2_journal_commit_transaction
commit transaction N
jbd2_journal_forget
set_buffer_freed(bh1)
jbd2_journal_commit_transaction
commit transaction N+1
...
clear_buffer_mapped(bh1)
ext4_getblk(bh2 ummapped)
...
grow_dev_page
init_page_buffers
bh1->b_private=NULL
bh2->b_private=NULL
jbd2_journal_put_journal_head(jh1)
__journal_remove_journal_head(hb1)
jh1 is NULL and trigger oops
*) Dir entry block bh1 and bh2 belongs to one page, and the bh2 has
already been unmapped.
For the metadata buffer we forgetting, we should always keep the mapped
flag and clear the dirty flags is enough, so this patch pick out the
these buffers and keep their BH_Mapped flag.
Link: https://lore.kernel.org/r/20200213063821.30455-3-yi.zhang@huawei.com
Fixes: 904cdbd41d74 ("jbd2: clear dirty flag when revoking a buffer from an older transaction")
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a66a7ded12baa6ebbb2e3e82f8cb91382814839 ]
There is no need to delay the clearing of b_modified flag to the
transaction committing time when unmapping the journalled buffer, so
just move it to the journal_unmap_buffer().
Link: https://lore.kernel.org/r/20200213063821.30455-2-yi.zhang@huawei.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit cf2b012c90e74e85d8aea7d67e48868069cfee0c upstream.
Change 21537dc driver PMBus polling of MFR_COMMON from bits 5/4 to
bits 6/5. This fixs a LTC297X family bug where polling always returns
not busy even when the part is busy. This fixes a LTC388X and
LTM467X bug where polling used PEND and NOT_IN_TRANS, and BUSY was
not polled, which can lead to NACKing of commands. LTC388X and
LTM467X modules now poll BUSY and PEND, increasing reliability by
eliminating NACKing of commands.
Signed-off-by: Mike Jones <michael-a1.jones@analog.com>
Link: https://lore.kernel.org/r/1580234400-2829-2-git-send-email-michael-a1.jones@analog.com
Fixes: e04d1ce9bbb49 ("hwmon: (ltc2978) Add polling for chips requiring it")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f861854e1b435b27197417f6f90d87188003cb24 upstream.
Perf doesn't take the left period into account when auto-reload is
enabled with fixed period sampling mode in context switch.
Here is the MSR trace of the perf command as below.
(The MSR trace is simplified from a ftrace log.)
#perf record -e cycles:p -c 2000000 -- ./triad_loop
//The MSR trace of task schedule out
//perf disable all counters, disable PEBS, disable GP counter 0,
//read GP counter 0, and re-enable all counters.
//The counter 0 stops at 0xfffffff82840
write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0
write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 0
write_msr: MSR_P6_EVNTSEL0(186), value 40003003c
rdpmc: 0, value fffffff82840
write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff
//The MSR trace of the same task schedule in again
//perf disable all counters, enable and set GP counter 0,
//enable PEBS, and re-enable all counters.
//0xffffffe17b80 (-2000000) is written to GP counter 0.
write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0
write_msr: MSR_IA32_PMC0(4c1), value ffffffe17b80
write_msr: MSR_P6_EVNTSEL0(186), value 40043003c
write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 1
write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff
When the same task schedule in again, the counter should starts from
previous left. However, it starts from the fixed period -2000000 again.
A special variant of intel_pmu_save_and_restart() is used for
auto-reload, which doesn't update the hwc->period_left.
When the monitored task schedules in again, perf doesn't know the left
period. The fixed period is used, which is inaccurate.
With auto-reload, the counter always has a negative counter value. So
the left period is -value. Update the period_left in
intel_pmu_save_and_restart_reload().
With the patch:
//The MSR trace of task schedule out
write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0
write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 0
write_msr: MSR_P6_EVNTSEL0(186), value 40003003c
rdpmc: 0, value ffffffe25cbc
write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff
//The MSR trace of the same task schedule in again
write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0
write_msr: MSR_IA32_PMC0(4c1), value ffffffe25cbc
write_msr: MSR_P6_EVNTSEL0(186), value 40043003c
write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 1
write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff
Fixes: d31fc13fdcb2 ("perf/x86/intel: Fix event update for auto-reload")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200121190125.3389-1-kan.liang@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0f8a206df7c920150d2aa45574fba0ab7ff6be4f upstream.
Clang warns:
In file included from ../arch/s390/boot/startup.c:3:
In file included from ../include/linux/elf.h:5:
In file included from ../arch/s390/include/asm/elf.h:132:
In file included from ../include/linux/compat.h:10:
In file included from ../include/linux/time.h:74:
In file included from ../include/linux/time32.h:13:
In file included from ../include/linux/timex.h:65:
../arch/s390/include/asm/timex.h:160:20: warning: passing 'unsigned char
[16]' to parameter of type 'char *' converts between pointers to integer
types with different sign [-Wpointer-sign]
get_tod_clock_ext(clk);
^~~
../arch/s390/include/asm/timex.h:149:44: note: passing argument to
parameter 'clk' here
static inline void get_tod_clock_ext(char *clk)
^
Change clk's type to just be char so that it matches what happens in
get_tod_clock_ext.
Fixes: 57b28f66316d ("[S390] s390_hypfs: Add new attributes")
Link: https://github.com/ClangBuiltLinux/linux/issues/861
Link: http://lkml.kernel.org/r/20200208140858.47970-1-natechancellor@gmail.com
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 07928d9bfc81640bab36f5190e8725894d93b659 upstream.
The function padata_flush_queues is fundamentally broken because
it cannot force padata users to complete the request that is
underway. IOW padata has to passively wait for the completion
of any outstanding work.
As it stands flushing is used in two places. Its use in padata_stop
is simply unnecessary because nothing depends on the queues to
be flushed afterwards.
The other use in padata_replace is more substantial as we depend
on it to free the old pd structure. This patch instead uses the
pd->refcnt to dynamically free the pd structure once all requests
are complete.
Fixes: 2b73b07ab8a4 ("padata: Flush the padata queues actively")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
[dj: leave "pd->pinst = pinst" assignment in padata_alloc_pd()]
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 25d387287cf0330abf2aad761ce6eee67326a355 upstream.
Commit 3fe3331bb285 ("perf/x86/amd: Add event map for AMD Family 17h"),
claimed L2 misses were unsupported, due to them not being found in its
referenced documentation, whose link has now moved [1].
That old documentation listed PMCx064 unit mask bit 3 as:
"LsRdBlkC: LS Read Block C S L X Change to X Miss."
and bit 0 as:
"IcFillMiss: IC Fill Miss"
We now have new public documentation [2] with improved descriptions, that
clearly indicate what events those unit mask bits represent:
Bit 3 now clearly states:
"LsRdBlkC: Data Cache Req Miss in L2 (all types)"
and bit 0 is:
"IcFillMiss: Instruction Cache Req Miss in L2."
So we can now add support for L2 misses in perf's genericised events as
PMCx064 with both the above unit masks.
[1] The commit's original documentation reference, "Processor Programming
Reference (PPR) for AMD Family 17h Model 01h, Revision B1 Processors",
originally available here:
https://www.amd.com/system/files/TechDocs/54945_PPR_Family_17h_Models_00h-0Fh.pdf
is now available here:
https://developer.amd.com/wordpress/media/2017/11/54945_PPR_Family_17h_Models_00h-0Fh.pdf
[2] "Processor Programming Reference (PPR) for Family 17h Model 31h,
Revision B0 Processors", available here:
https://developer.amd.com/wp-content/resources/55803_0.54-PUB.pdf
Fixes: 3fe3331bb285 ("perf/x86/amd: Add event map for AMD Family 17h")
Reported-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Babu Moger <babu.moger@amd.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200121171232.28839-1-kim.phillips@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 10a3a3edc5b89a8cd095bc63495fb1e0f42047d9 upstream.
A remount to a read-write filesystem is not safe when there's tree-log
to be replayed. Files that could be opened until now might be affected
by the changes in the tree-log.
A regular mount is needed to replay the log so the filesystem presents
the consistent view with the pending changes included.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ac05ca913e9f3871126d61da275bfe8516ff01ca upstream.
We have a few cases where we allow an extent map that is in an extent map
tree to be merged with other extents in the tree. Such cases include the
unpinning of an extent after the respective ordered extent completed or
after logging an extent during a fast fsync. This can lead to subtle and
dangerous problems because when doing the merge some other task might be
using the same extent map and as consequence see an inconsistent state of
the extent map - for example sees the new length but has seen the old start
offset.
With luck this triggers a BUG_ON(), and not some silent bug, such as the
following one in __do_readpage():
$ cat -n fs/btrfs/extent_io.c
3061 static int __do_readpage(struct extent_io_tree *tree,
3062 struct page *page,
(...)
3127 em = __get_extent_map(inode, page, pg_offset, cur,
3128 end - cur + 1, get_extent, em_cached);
3129 if (IS_ERR_OR_NULL(em)) {
3130 SetPageError(page);
3131 unlock_extent(tree, cur, end);
3132 break;
3133 }
3134 extent_offset = cur - em->start;
3135 BUG_ON(extent_map_end(em) <= cur);
(...)
Consider the following example scenario, where we end up hitting the
BUG_ON() in __do_readpage().
We have an inode with a size of 8KiB and 2 extent maps:
extent A: file offset 0, length 4KiB, disk_bytenr = X, persisted on disk by
a previous transaction
extent B: file offset 4KiB, length 4KiB, disk_bytenr = X + 4KiB, not yet
persisted but writeback started for it already. The extent map
is pinned since there's writeback and an ordered extent in
progress, so it can not be merged with extent map A yet
The following sequence of steps leads to the BUG_ON():
1) The ordered extent for extent B completes, the respective page gets its
writeback bit cleared and the extent map is unpinned, at that point it
is not yet merged with extent map A because it's in the list of modified
extents;
2) Due to memory pressure, or some other reason, the MM subsystem releases
the page corresponding to extent B - btrfs_releasepage() is called and
returns 1, meaning the page can be released as it's not dirty, not under
writeback anymore and the extent range is not locked in the inode's
iotree. However the extent map is not released, either because we are
not in a context that allows memory allocations to block or because the
inode's size is smaller than 16MiB - in this case our inode has a size
of 8KiB;
3) Task B needs to read extent B and ends up __do_readpage() through the
btrfs_readpage() callback. At __do_readpage() it gets a reference to
extent map B;
4) Task A, doing a fast fsync, calls clear_em_loggin() against extent map B
while holding the write lock on the inode's extent map tree - this
results in try_merge_map() being called and since it's possible to merge
extent map B with extent map A now (the extent map B was removed from
the list of modified extents), the merging begins - it sets extent map
B's start offset to 0 (was 4KiB), but before it increments the map's
length to 8KiB (4kb + 4KiB), task A is at:
BUG_ON(extent_map_end(em) <= cur);
The call to extent_map_end() sees the extent map has a start of 0
and a length still at 4KiB, so it returns 4KiB and 'cur' is 4KiB, so
the BUG_ON() is triggered.
So it's dangerous to modify an extent map that is in the tree, because some
other task might have got a reference to it before and still using it, and
needs to see a consistent map while using it. Generally this is very rare
since most paths that lookup and use extent maps also have the file range
locked in the inode's iotree. The fsync path is pretty much the only
exception where we don't do it to avoid serialization with concurrent
reads.
Fix this by not allowing an extent map do be merged if if it's being used
by tasks other then the one attempting to merge the extent map (when the
reference count of the extent map is greater than 2).
Reported-by: ryusuke1925 <st13s20@gm.ibaraki-ct.ac.jp>
Reported-by: Koki Mitani <koki.mitani.xg@hco.ntt.co.jp>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206211
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d65d87a07476aa17df2dcb3ad18c22c154315bec upstream.
If CONFIG_QFMT_V2 is not enabled, but CONFIG_QUOTA is enabled, when a
user tries to mount a file system with the quota or project quota
enabled, the kernel will emit a very confusing messsage:
EXT4-fs warning (device vdc): ext4_enable_quotas:5914: Failed to enable quota tracking (type=0, err=-3). Please run e2fsck to fix.
EXT4-fs (vdc): mount failed
We will now report an explanatory message indicating which kernel
configuration options have to be enabled, to avoid customer/sysadmin
confusion.
Link: https://lore.kernel.org/r/20200215012738.565735-1-tytso@mit.edu
Google-Bug-Id: 149093531
Fixes: 7c319d328505b778 ("ext4: make quota as first class supported feature")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 48a34311953d921235f4d7bbd2111690d2e469cf upstream.
DIR_INDEX has been introduced as a compat ext4 feature. That means that
even kernels / tools that don't understand the feature may modify the
filesystem. This works because for kernels not understanding indexed dir
format, internal htree nodes appear just as empty directory entries.
Index dir aware kernels then check the htree structure is still
consistent before using the data. This all worked reasonably well until
metadata checksums were introduced. The problem is that these
effectively made DIR_INDEX only ro-compatible because internal htree
nodes store checksums in a different place than normal directory blocks.
Thus any modification ignorant to DIR_INDEX (or just clearing
EXT4_INDEX_FL from the inode) will effectively cause checksum mismatch
and trigger kernel errors. So we have to be more careful when dealing
with indexed directories on filesystems with checksumming enabled.
1) We just disallow loading any directory inodes with EXT4_INDEX_FL when
DIR_INDEX is not enabled. This is harsh but it should be very rare (it
means someone disabled DIR_INDEX on existing filesystem and didn't run
e2fsck), e2fsck can fix the problem, and we don't want to answer the
difficult question: "Should we rather corrupt the directory more or
should we ignore that DIR_INDEX feature is not set?"
2) When we find out htree structure is corrupted (but the filesystem and
the directory should in support htrees), we continue just ignoring htree
information for reading but we refuse to add new entries to the
directory to avoid corrupting it more.
Link: https://lore.kernel.org/r/20200210144316.22081-1-jack@suse.cz
Fixes: dbe89444042a ("ext4: Calculate and verify checksums for htree nodes")
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 14c9ca0583eee8df285d68a0e6ec71053efd2228 upstream.
Don't assume that the mmp_nodename and mmp_bdevname strings are NUL
terminated, since they are filled in by snprintf(), which is not
guaranteed to do so.
Link: https://lore.kernel.org/r/1580076215-1048-1-git-send-email-adilger@dilger.ca
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 93f9d1a4ac5930654c17412e3911b46ece73755a upstream.
The Audioengine D1 (0x2912:0x30c8) does support reading the sample rate,
but it returns the rate in byte-reversed order.
When setting sampling rate, the driver produces these warning messages:
[168840.944226] usb 3-2.2: current rate 4500480 is different from the runtime rate 44100
[168854.930414] usb 3-2.2: current rate 8436480 is different from the runtime rate 48000
[168905.185825] usb 3-2.1.2: current rate 30465 is different from the runtime rate 96000
As can be seen from the hexadecimal conversion, the current rate read
back is byte-reversed from the rate that was set.
44100 == 0x00ac44, 4500480 == 0x44ac00
48000 == 0x00bb80, 8436480 == 0x80bb00
96000 == 0x017700, 30465 == 0x007701
Rather than implementing a new quirk to reverse the order, just skip
checking the rate to avoid spamming the log.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200211162235.1639889-1-nivedita@alum.mit.edu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b4a81b87a4cfe2bb26a4a943b748d96a43ef20e8 upstream.
In ecryptfs_init_messaging(), if the allocation for 'ecryptfs_msg_ctx_arr'
fails, the previously allocated 'ecryptfs_daemon_hash' is not deallocated,
leading to a memory leak bug. To fix this issue, free
'ecryptfs_daemon_hash' before returning the error.
Cc: stable@vger.kernel.org
Fixes: 88b4a07e6610 ("[PATCH] eCryptfs: Public key transport mechanism")
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fe2e082f5da5b4a0a92ae32978f81507ef37ec66 upstream.
In parse_tag_1_packet(), if tag 1 packet contains a key larger than
ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES, no cleanup is executed, leading to a
memory leak on the allocated 'auth_tok_list_item'. To fix this issue, go to
the label 'out_free' to perform the cleanup work.
Cc: stable@vger.kernel.org
Fixes: dddfa461fc89 ("[PATCH] eCryptfs: Public key; packet management")
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 44eeb081b8630bb3ad3cd381d1ae1831463e48bb upstream.
Some code in HD-audio driver calls snprintf() in a loop and still
expects that the return value were actually written size, while
snprintf() returns the expected would-be length instead. When the
given buffer limit were small, this leads to a buffer overflow.
Use scnprintf() for addressing those issues. It returns the actually
written size unlike snprintf().
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200218091409.27162-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb6d4d340e0532032c808a9933eaaa7b8de435ab upstream.
This is encoded as F3 0F C7 /7 with a register argument. The register
argument is the second array in the group9 GroupDual, while F3 is the
fourth element of a Prefix.
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a582c540ac1b10f0a7d37415e04c4af42409fd08 upstream.
RDPID is a new instruction that reads MSR_TSC_AUX quickly. This
should be considerably faster than reading the GDT. Add a
cpufeature for it and use it from __vdso_getcpu() when available.
Tested-by: Megha Dey <megha.dey@intel.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/4f6c3a22012d10f1c65b9ca15800e01b42c7d39d.1479320367.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1754c4f60aaf1e17d886afefee97e94d7f27b4cb ]
Commit e5e884b42639 ("libertas: Fix two buffer overflows at parsing bss
descriptor") introduced a bounds check on the number of supplied rates to
lbs_ibss_join_existing() and made it to return on overflow.
However, the aforementioned commit doesn't set the return value accordingly
and thus, lbs_ibss_join_existing() would return with zero even though it
failed.
Make lbs_ibss_join_existing return -EINVAL in case the bounds check on the
number of supplied rates fails.
Fixes: e5e884b42639 ("libertas: Fix two buffer overflows at parsing bss descriptor")
Signed-off-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7bf1fb7ddca331780b9a733ae308737b39f1ad4 ]
Commit e5e884b42639 ("libertas: Fix two buffer overflows at parsing bss
descriptor") introduced a bounds check on the number of supplied rates to
lbs_ibss_join_existing().
Unfortunately, it introduced a return path from within a RCU read side
critical section without a corresponding rcu_read_unlock(). Fix this.
Fixes: e5e884b42639 ("libertas: Fix two buffer overflows at parsing bss descriptor")
Signed-off-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b70261a288ea4d2f4ac7cd04be08a9f0f2de4f4d ]
mwifiex_cmd_append_vsie_tlv() calls memcpy() without checking
the destination size may trigger a buffer overflower,
which a local user could use to cause denial of service
or the execution of arbitrary code.
Fix it by putting the length check before calling memcpy().
Signed-off-by: Qing Xu <m1s5p6688@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a9b153c5591548612c3955c9600a98150c81875 ]
mwifiex_ret_wmm_get_status() calls memcpy() without checking the
destination size.Since the source is given from remote AP which
contains illegal wmm elements , this may trigger a heap buffer
overflow.
Fix it by putting the length check before calling memcpy().
Signed-off-by: Qing Xu <m1s5p6688@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 47ace7e012b9f7ad71d43ac9063d335ea3d6820b upstream.
Move blk_queue_make_request() to dm.c:alloc_dev() so that
q->make_request_fn is never NULL during the lifetime of a DM device
(even one that is created without a DM table).
Otherwise generic_make_request() will crash simply by doing:
dmsetup create -n test
mount /dev/dm-N /mnt
While at it, move ->congested_data initialization out of
dm.c:alloc_dev() and into the bio-based specific init method.
Reported-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/1860231
Fixes: ff36ab34583a ("dm: remove request-based logic from make_request_fn wrapper")
Depends-on: c12c9a3c3860c ("dm: various cleanups to md->queue initialization code")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
[smb: adjusted for context and dm_init_md_queue() exitsting in older
kernels, and congested_data embedded in backing_dev_info]
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6d7537270e3283b92f9b327da9d58a4de40fe8d0 upstream.
Driver initiates OCR if a DCMD command times out. But there is a deadlock
if the driver attempts to invoke another OCR before the mutex lock
(reset_mutex) is released from the previous session of OCR.
This patch takes care of the above scenario using new flag
MEGASAS_FUSION_OCR_NOT_POSSIBLE to indicate if OCR is possible.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1579000882-20246-9-git-send-email-anand.lodnoor@broadcom.com
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Anand Lodnoor <anand.lodnoor@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 805f635703b2562b5ddd822c62fc9124087e5dd5 upstream.
The FN_SDSELF_B and FN_SD1_CLK_B enum IDs are used twice, which means
one set of users must be wrong. Replace them by the correct enum IDs.
Fixes: 87f8c988636db0d4 ("sh-pfc: Add r8a7778 pinmux support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191218194812.12741-2-geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7559d3d295f3365ea7ac0c0274c05e633fe4f594 upstream.
By default a pseries guest supports a H_PUT_TCE hypercall which maps
a single IOMMU page in a DMA window. Additionally the hypervisor may
support H_PUT_TCE_INDIRECT/H_STUFF_TCE which update multiple TCEs at once;
this is advertised via the device tree /rtas/ibm,hypertas-functions
property which Linux converts to FW_FEATURE_MULTITCE.
FW_FEATURE_MULTITCE is checked when dma_iommu_ops is used; however
the code managing the huge DMA window (DDW) ignores it and calls
H_PUT_TCE_INDIRECT even if it is explicitly disabled via
the "multitce=off" kernel command line parameter.
This adds FW_FEATURE_MULTITCE checking to the DDW code path.
This changes tce_build_pSeriesLP to take liobn and page size as
the huge window does not have iommu_table descriptor which usually
the place to store these numbers.
Fixes: 4e8b0cf46b25 ("powerpc/pseries: Add support for dynamic dma windows")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Tested-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191216041924.42318-3-aik@ozlabs.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a7e0f3fc01df4b1b7077df777c37feae8c9e8b6d upstream.
The clock rate range for the TCB1 clock is missing. define it in the device
tree.
Reported-by: Karl Rudbæk Olsen <karl@micro-technic.com>
Fixes: d2e8190b7916 ("ARM: at91/dt: define sama5d3 clocks")
Link: https://lore.kernel.org/r/20200110172007.1253659-2-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ee0aa926ddb0bd8ba59e33e3803b3b5804e3f5da upstream.
Currently the maximum rate for peripheral clock is calculated based on a
typical 133MHz MCK. The maximum frequency is defined in the datasheet as a
ratio to MCK. Some sama5d3 platforms are using a 166MHz MCK. Update the
device trees to match the maximum rate based on 166MHz.
Reported-by: Karl Rudbæk Olsen <karl@micro-technic.com>
Fixes: d2e8190b7916 ("ARM: at91/dt: define sama5d3 clocks")
Link: https://lore.kernel.org/r/20200110172007.1253659-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7980dff398f86a618f502378fa27cf7e77449afa upstream.
Add a missing property to GMAC node so that multicast filtering works
correctly.
Fixes: 556cc1c5f528 ("ARC: [axs101] Add support for AXS101 SDP (software development platform)")
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b6da197a2e9670df6f07e6698629e9ce95ab614e upstream.
As reported by Guilherme G. Piccoli:
---8<---8<---8<---
The rtc-cmos interrupt setting was changed in the commit 079062b28fb4
("rtc: cmos: prevent kernel warning on IRQ flags mismatch") in order
to allow shared interrupts; according to that commit's description,
some machine got kernel warnings due to the interrupt line being shared
between rtc-cmos and other hardware, and rtc-cmos didn't allow IRQ sharing
that time.
After the aforementioned commit though it was observed a huge increase
in lost HPET interrupts in some systems, observed through the following
kernel message:
[...] hpet1: lost 35 rtc interrupts
After investigation, it was narrowed down to the shared interrupts
usage when having the kernel option "irqpoll" enabled. In this case,
all IRQ handlers are called for non-timer interrupts, if such handlers
are setup in shared IRQ lines. The rtc-cmos IRQ handler could be set to
hpet_rtc_interrupt(), which will produce the kernel "lost interrupts"
message after doing work - lots of readl/writel to HPET registers, which
are known to be slow.
Although "irqpoll" is not a default kernel option, it's used in some contexts,
one being the kdump kernel (which is an already "impaired" kernel usually
running with 1 CPU available), so the performance burden could be considerable.
Also, the same issue would happen (in a shorter extent though) when using
"irqfixup" kernel option.
In a quick experiment, a virtual machine with uptime of 2 minutes produced
>300 calls to hpet_rtc_interrupt() when "irqpoll" was set, whereas without
sharing interrupts this number reduced to 1 interrupt. Machines with more
hardware than a VM should generate even more unnecessary HPET interrupts
in this scenario.
---8<---8<---8<---
After looking into the rtc-cmos driver history and DSDT table from
the Microsoft Surface 3, we may notice that Hans de Goede submitted
a correct fix (see dependency below). Thus, we simply revert
the culprit commit.
Fixes: 079062b28fb4 ("rtc: cmos: prevent kernel warning on IRQ flags mismatch")
Depends-on: a1e23a42f1bd ("rtc: cmos: Do not assume irq 8 for rtc when there are no legacy irqs")
Reported-by: Guilherme G. Piccoli <gpiccoli@canonical.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@canonical.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200123131437.28157-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f236a2a2ebabad0848ad0995af7ad1dc7029e895 upstream.
The current code returns -EPERM when the voltage loss bit is set.
Since the bit indicates that the time value is not valid, return
-EINVAL instead, which is the appropriate error code for this
situation.
Fixes: dcaf03849352 ("rtc: add hym8563 rtc-driver")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://lore.kernel.org/r/20191212153111.966923-1-paul.kocialkowski@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 924491f2e476f7234d722b24171a4daff61bbe13 upstream.
Currently, if an nfs server returns NFS4ERR_EXPIRED to open(),
we return EIO to applications without even trying to recover.
Fixes: 272289a3df72 ("NFSv4: nfs4_do_handle_exception() handle revoke/expiry of a single stateid")
Signed-off-by: Robert Milkowski <rmilkowski@gmail.com>
Reviewed-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
