IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit c4a5118a3ae1eadc687d84eef9431f9e13eb015c ]
devm_of_clk_add_hw_provider() may return an errno, so
add a return value check
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 8410e7f3b31e ("cpufreq: scmi: Fix OPP addition failure with a dummy clock provider")
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8f3a396a7ee43e6079176cc0fb8de2b95a23681 ]
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Stable-dep-of: c4a5118a3ae1 ("cpufreq: scmi: process the result of devm_of_clk_add_hw_provider()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9cbad37ce8122de32a1529e394b468bc101c9e7f ]
Add an of_property_present() function similar to
fwnode_property_present(). of_property_read_bool() could be used
directly, but it is cleaner to not use it on non-boolean properties.
Reviewed-by: Frank Rowand <frowand.list@gmail.com>
Tested-by: Frank Rowand <frowand.list@gmail.com>
Link: https://lore.kernel.org/all/20230215215547.691573-1-robh@kernel.org/
Signed-off-by: Rob Herring <robh@kernel.org>
Stable-dep-of: c4a5118a3ae1 ("cpufreq: scmi: process the result of devm_of_clk_add_hw_provider()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ca42c3ad9ed875b136065b010753a4caaaa1d38 ]
We can get rid of all the empty stubs because all these functions call
of_property_read_variable_u{8,16,32,64}_array() which already have an
empty stub if CONFIG_OF is not defined.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220118173504.2867523-3-michael@walle.cc
Stable-dep-of: c4a5118a3ae1 ("cpufreq: scmi: process the result of devm_of_clk_add_hw_provider()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56d2eeda87995245300836ee4dbd13b002311782 ]
In lpit_update_residency() there is a possibility of overflow
in multiplication, if tsc_khz is large enough (> UINT_MAX/1000).
Change multiplication to mul_u32_u32().
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: eeb2d80d502a ("ACPI / LPIT: Add Low Power Idle Table (LPIT) support")
Signed-off-by: Nikita Kiryushin <kiryushin@ancud.ru>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccd45faf4973746c4f30ea41eec864e5cf191099 ]
If acpi_get_parent() called in acpi_video_dev_register_backlight()
fails, for example, because acpi_ut_acquire_mutex() fails inside
acpi_get_parent), this can lead to incorrect (uninitialized)
acpi_parent handle being passed to acpi_get_pci_dev() for detecting
the parent pci device.
Check acpi_get_parent() result and set parent device only in case of success.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 9661e92c10a9 ("acpi: tie ACPI backlight devices to PCI devices if possible")
Signed-off-by: Nikita Kiryushin <kiryushin@ancud.ru>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 923fb6238cb3ac529aa2bf13b3b1e53762186a8b ]
Under heavy load it is likely that the controller is done
with its own task but the thread unlocking the wait is not
scheduled in time. Increasing IFC_TIMEOUT_MSECS allows the
controller to respond within allowable timeslice of 1 sec.
fsl,ifc-nand 7e800000.nand: Controller is not responding
[<804b2047>] (nand_get_device) from [<804b5335>] (nand_write_oob+0x1b/0x4a)
[<804b5335>] (nand_write_oob) from [<804a3585>] (mtd_write+0x41/0x5c)
[<804a3585>] (mtd_write) from [<804c1d47>] (ubi_io_write+0x17f/0x22c)
[<804c1d47>] (ubi_io_write) from [<804c047b>] (ubi_eba_write_leb+0x5b/0x1d0)
Fixes: 82771882d960 ("NAND Machine support for Integrated Flash Controller")
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ronald Monthero <debug.penguin32@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20231118083156.776887-1-debug.penguin32@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 424a8166764e462258fdccaaefbdeb07517c8b21 ]
ZynqMP GQSPI driver no longer uses spi-master framework. It had been
converted to use spi-mem framework. So remove driver dependency from
spi-master and replace it with spi-mem.
Fixes: 1c26372e5aa9 ("spi: spi-zynqmp-gqspi: Update driver to use spi-mem framework")
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/1699282435-884917-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e123015c0ba859cf48aa7f89c5016cc6e98e018d ]
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Fixes: b9ef7b4b867f ("powerpc: Convert to using %pOFn instead of device_node.name")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231126095739.1501990-1-chentao@kylinos.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8649829a1dd25199bbf557b2621cedb4bf9b3050 ]
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Fixes: 2717a33d6074 ("powerpc/opal-irqchip: Use interrupt names if present")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231127030755.1546750-1-chentao@kylinos.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a260f2dd827bbc82cc60eb4f4d8c22707d80742 ]
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Add a null pointer check, and release 'ent' to avoid memory leaks.
Fixes: bfd2f0d49aef ("powerpc/powernv: Get rid of old scom_controller abstraction")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231208085937.107210-1-chentao@kylinos.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9dbd5927408c4a0707de73ae9dd9306b184e8fee ]
The FPU & VMX preemption tests do not check for errors returned by the
low-level asm routines, preempt_fpu() / preempt_vsx() respectively.
That means any register corruption detected by the asm routines does not
result in a test failure.
Fix it by returning the return value of the asm routines from the
pthread child routines.
Fixes: e5ab8be68e44 ("selftests/powerpc: Test preservation of FPU and VMX regs across preemption")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231128132748.1990179-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd68ffce69f6cf8ddd3a3c32549d1d2275e49fc5 ]
dlpar_memory_remove_by_index() may access beyond the bounds of the
drmem lmb array when the LMB lookup fails to match an entry with the
given DRC index. When the search fails, the cursor is left pointing to
&drmem_info->lmbs[drmem_info->n_lmbs], which is one element past the
last valid entry in the array. The debug message at the end of the
function then dereferences this pointer:
pr_debug("Failed to hot-remove memory at %llx\n",
lmb->base_addr);
This was found by inspection and confirmed with KASAN:
pseries-hotplug-mem: Attempting to hot-remove LMB, drc index 1234
==================================================================
BUG: KASAN: slab-out-of-bounds in dlpar_memory+0x298/0x1658
Read of size 8 at addr c000000364e97fd0 by task bash/949
dump_stack_lvl+0xa4/0xfc (unreliable)
print_report+0x214/0x63c
kasan_report+0x140/0x2e0
__asan_load8+0xa8/0xe0
dlpar_memory+0x298/0x1658
handle_dlpar_errorlog+0x130/0x1d0
dlpar_store+0x18c/0x3e0
kobj_attr_store+0x68/0xa0
sysfs_kf_write+0xc4/0x110
kernfs_fop_write_iter+0x26c/0x390
vfs_write+0x2d4/0x4e0
ksys_write+0xac/0x1a0
system_call_exception+0x268/0x530
system_call_vectored_common+0x15c/0x2ec
Allocated by task 1:
kasan_save_stack+0x48/0x80
kasan_set_track+0x34/0x50
kasan_save_alloc_info+0x34/0x50
__kasan_kmalloc+0xd0/0x120
__kmalloc+0x8c/0x320
kmalloc_array.constprop.0+0x48/0x5c
drmem_init+0x2a0/0x41c
do_one_initcall+0xe0/0x5c0
kernel_init_freeable+0x4ec/0x5a0
kernel_init+0x30/0x1e0
ret_from_kernel_user_thread+0x14/0x1c
The buggy address belongs to the object at c000000364e80000
which belongs to the cache kmalloc-128k of size 131072
The buggy address is located 0 bytes to the right of
allocated 98256-byte region [c000000364e80000, c000000364e97fd0)
==================================================================
pseries-hotplug-mem: Failed to hot-remove memory at 0
Log failed lookups with a separate message and dereference the
cursor only when it points to a valid entry.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: 51925fb3c5c9 ("powerpc/pseries: Implement memory hotplug remove in the kernel")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231114-pseries-memhp-fixes-v1-1-fb8f2bb7c557@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a74197b65e69c46fe6e53f7df2f4d6ce9ffe012 ]
Fix build errors when CURRITUCK=y and I2C is not builtin (=m or is
not set). Fixes these build errors:
powerpc-linux-ld: arch/powerpc/platforms/44x/ppc476.o: in function `avr_halt_system':
ppc476.c:(.text+0x58): undefined reference to `i2c_smbus_write_byte_data'
powerpc-linux-ld: arch/powerpc/platforms/44x/ppc476.o: in function `ppc47x_device_probe':
ppc476.c:(.init.text+0x18): undefined reference to `i2c_register_driver'
Fixes: 2a2c74b2efcb ("IBM Akebono: Add the Akebono platform")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: lore.kernel.org/r/202312010820.cmdwF5X9-lkp@intel.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231201055159.8371-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b1e38002648819c04773647d5242990e2824264 ]
crtsavres.o is linked to modules. However, as explained in commit
d0e628cd817f ("kbuild: doc: clarify the difference between extra-y
and always-y"), 'make modules' does not build extra-y.
For example, the following command fails:
$ make ARCH=powerpc LLVM=1 KBUILD_MODPOST_WARN=1 mrproper ps3_defconfig modules
[snip]
LD [M] arch/powerpc/platforms/cell/spufs/spufs.ko
ld.lld: error: cannot open arch/powerpc/lib/crtsavres.o: No such file or directory
make[3]: *** [scripts/Makefile.modfinal:56: arch/powerpc/platforms/cell/spufs/spufs.ko] Error 1
make[2]: *** [Makefile:1844: modules] Error 2
make[1]: *** [/home/masahiro/workspace/linux-kbuild/Makefile:350: __build_one_by_one] Error 2
make: *** [Makefile:234: __sub-make] Error 2
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Fixes: baa25b571a16 ("powerpc/64: Do not link crtsavres.o in vmlinux")
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231120232332.4100288-1-masahiroy@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54a11654de163994e32b24e3aa90ef81f4a3184d ]
Commit e4412739472b ("Documentation: raise minimum supported version of
binutils to 2.25") allows us to remove the checks for old binutils.
There is no more user for ld-ifversion. Remove it as well.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230119082250.151485-1-masahiroy@kernel.org
Stable-dep-of: 1b1e38002648 ("powerpc: add crtsavres.o to always-y instead of extra-y")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a3ad84da076009c94969fa97f604257667e2980f ]
This patch future-proofs the kernel against linker changes that might
put the toc pointer at some location other than .got+0x8000, by
replacing __toc_start+0x8000 with .TOC. throughout. If the kernel's
idea of the toc pointer doesn't agree with the linker, bad things
happen.
prom_init.c code relocating its toc is also changed so that a symbolic
__prom_init_toc_start toc-pointer relative address is calculated
rather than assuming that it is always at toc-pointer - 0x8000. The
length calculations loading values from the toc are also avoided.
It's a little incestuous to do that with unreloc_toc picking up
adjusted values (which is fine in practice, they both adjust by the
same amount if all goes well).
I've also changed the way .got is aligned in vmlinux.lds and
zImage.lds, mostly so that dumping out section info by objdump or
readelf plainly shows the alignment is 256. This linker script
feature was added 2005-09-27, available in FSF binutils releases from
2.17 onwards. Should be safe to use in the kernel, I think.
Finally, put *(.got) before the prom_init.o entry which only needs
*(.toc), so that the GOT header goes in the correct place. I don't
believe this makes any difference for the kernel as it would for
dynamic objects being loaded by ld.so. That change is just to stop
lusers who blindly copy kernel scripts being led astray. Of course,
this change needs the prom_init.c changes.
Some notes on .toc and .got.
.toc is a compiler generated section of addresses. .got is a linker
generated section of addresses, generally built when the linker sees
R_*_*GOT* relocations. In the case of powerpc64 ld.bfd, there are
multiple generated .got sections, one per input object file. So you
can somewhat reasonably write in a linker script an input section
statement like *prom_init.o(.got .toc) to mean "the .got and .toc
section for files matching *prom_init.o". On other architectures that
doesn't make sense, because the linker generally has just one .got
section. Even on powerpc64, note well that the GOT entries for
prom_init.o may be merged with GOT entries from other objects. That
means that if prom_init.o references, say, _end via some GOT
relocation, and some other object also references _end via a GOT
relocation, the GOT entry for _end may be in the range
__prom_init_toc_start to __prom_init_toc_end and if the kernel does
something special to GOT/TOC entries in that range then the value of
_end as seen by objects other than prom_init.o will be affected. On
the other hand the GOT entry for _end may not be in the range
__prom_init_toc_start to __prom_init_toc_end. Which way it turns out
is deterministic but a detail of linker operation that should not be
relied on.
A feature of ld.bfd is that input .toc (and .got) sections matching
one linker input section statement may be sorted, to put entries used
by small-model code first, near the toc base. This is why scripts for
powerpc64 normally use *(.got .toc) rather than *(.got) *(.toc), since
the first form allows more freedom to sort.
Another feature of ld.bfd is that indirect addressing sequences using
the GOT/TOC may be edited by the linker to relative addressing. In
many cases relative addressing would be emitted by gcc for
-mcmodel=medium if you appropriately decorate variable declarations
with non-default visibility.
The original patch is here:
https://lore.kernel.org/linuxppc-dev/20210310034813.GM6042@bubble.grove.modra.org/
Signed-off-by: Alan Modra <amodra@au1.ibm.com>
[aik: removed non-relocatable which is gone in 24d33ac5b8ffb]
[aik: added <=2.24 check]
[aik: because of llvm-as, kernel_toc_addr() uses "mr" instead of global register variable]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211221055904.555763-2-aik@ozlabs.ru
Stable-dep-of: 1b1e38002648 ("powerpc: add crtsavres.o to always-y instead of extra-y")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3091f5fc5f1df7741ddf326561384e0997eca2a1 ]
.opd section contains function descriptors used to locate
functions in the kernel. If someone is able to modify a
function descriptor he will be able to run arbitrary
kernel function instead of another.
To avoid that, move .opd section inside read-only memory.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3cd40b682fb6f75bb40947b55ca0bac20cb3f995.1634136222.git.christophe.leroy@csgroup.eu
Stable-dep-of: 1b1e38002648 ("powerpc: add crtsavres.o to always-y instead of extra-y")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 475c58e1a471e9b873e3e39958c64a2d278275c8 ]
Enabling -Wstringop-overflow globally exposes a warning for a common bug
in the usage of strncat():
drivers/edac/thunderx_edac.c: In function 'thunderx_ocx_com_threaded_isr':
drivers/edac/thunderx_edac.c:1136:17: error: 'strncat' specified bound 1024 equals destination size [-Werror=stringop-overflow=]
1136 | strncat(msg, other, OCX_MESSAGE_SIZE);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
...
1145 | strncat(msg, other, OCX_MESSAGE_SIZE);
...
1150 | strncat(msg, other, OCX_MESSAGE_SIZE);
...
Apparently the author of this driver expected strncat() to behave the
way that strlcat() does, which uses the size of the destination buffer
as its third argument rather than the length of the source buffer. The
result is that there is no check on the size of the allocated buffer.
Change it to strlcat().
[ bp: Trim compiler output, fixup commit message. ]
Fixes: 41003396f932 ("EDAC, thunderx: Add Cavium ThunderX EDAC driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20231122222007.3199885-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a24d61c609813963aacc9f6ec8343f4fcaac7243 ]
tl;dr: The num_digits() function has a theoretical overflow issue.
But it doesn't affect any actual in-tree users. Fix it by using
a larger type for one of the local variables.
Long version:
There is an overflow in variable m in function num_digits when val
is >= 1410065408 which leads to the digit calculation loop to
iterate more times than required. This results in either more
digits being counted or in some cases (for example where val is
1932683193) the value of m eventually overflows to zero and the
while loop spins forever).
Currently the function num_digits is currently only being used for
small values of val in the SMP boot stage for digit counting on the
number of cpus and NUMA nodes, so the overflow is never encountered.
However it is useful to fix the overflow issue in case the function
is used for other purposes in the future. (The issue was discovered
while investigating the digit counting performance in various
kernel helper functions rather than any real-world use-case).
The simplest fix is to make m a long long, the overhead in
multiplication speed for a long long is very minor for small values
of val less than 10000 on modern processors. The alternative
fix is to replace the multiplication with a constant division
by 10 loop (this compiles down to an multiplication and shift)
without needing to make m a long long, but this is slightly slower
than the fix in this commit when measured on a range of x86
processors).
[ dhansen: subject and changelog tweaks ]
Fixes: 646e29a1789a ("x86: Improve the printout of the SMP bootup CPU table")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20231102174901.2590325-1-colin.i.king%40gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit cc0271a339cc70cae914c3ec20edc2a8058407da upstream.
CCITMIN is a 12 bit field and doesn't fit in a u8, so extend it to u16.
This probably wasn't an issue previously because values higher than 255
never occurred.
But since commit 4aff040bcc8d ("coresight: etm: Override TRCIDR3.CCITMIN
on errata affected cpus"), a comparison with 256 was done to enable the
errata, generating the following W=1 build error:
coresight-etm4x-core.c:1188:24: error: result of comparison of
constant 256 with expression of type 'u8' (aka 'unsigned char') is
always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (drvdata->ccitmin == 256)
Cc: stable@vger.kernel.org
Fixes: 2e1cdfe184b5 ("coresight-etm4x: Adding CoreSight ETM4x driver")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310302043.as36UFED-lkp@intel.com/
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231101115206.70810-1-james.clark@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 25054b232681c286fca9c678854f56494d1352cc upstream.
The ttyname buffer for the ledtrig_tty_data struct is allocated in the
sysfs ttyname_store() function. This buffer must be released on trigger
deactivation. This was missing and is thus a memory leak.
While we are at it, the TTY handler in the ledtrig_tty_data struct should
also be returned in case of the trigger deactivation call.
Cc: stable@vger.kernel.org
Fixes: fd4a641ac88f ("leds: trigger: implement a tty trigger")
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20231127081621.774866-1-fe@dev.tdt.de
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6aa1fc5a8085bbc01687aa708dcf2dbe637a5ee3 upstream.
Add device IDs for the Brainboxes UC-203, UC-257, UC-414, UC-475,
IS-300/IS-500 and PX-263/PX-295 and define the relevant "geometry"
for the cards.
This patch requires part 1 of this series.
Cc: <stable@vger.kernel.org>
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/AS4PR02MB7903A4094564BE28F1F926A6C4A6A@AS4PR02MB7903.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0c9ae0b8605078eafc3bea053cc78791e97ba2e2 upstream.
core-1 core-2
-------------------------------------------------------
uio_unregister_device uio_open
idev = idr_find()
device_unregister(&idev->dev)
put_device(&idev->dev)
uio_device_release
get_device(&idev->dev)
kfree(idev)
uio_free_minor(minor)
uio_release
put_device(&idev->dev)
kfree(idev)
-------------------------------------------------------
In the core-1 uio_unregister_device(), the device_unregister will kfree
idev when the idev->dev kobject ref is 1. But after core-1
device_unregister, put_device and before doing kfree, the core-2 may
get_device. Then:
1. After core-1 kfree idev, the core-2 will do use-after-free for idev.
2. When core-2 do uio_release and put_device, the idev will be double
freed.
To address this issue, we can get idev atomic & inc idev reference with
minor_lock.
Fixes: 57c5f4df0a5a ("uio: fix crash after the device is unregistered")
Cc: stable <stable@kernel.org>
Signed-off-by: Guanghui Feng <guanghuifeng@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/1703152663-59949-1-git-send-email-guanghuifeng@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e1090371e02b601cbfcea175c2a6cc7c955fa830 upstream.
Update the comments of binder_alloc_new_buf() to reflect that the return
value of the function is now ERR_PTR(-errno) on failure.
No functional changes in this patch.
Cc: stable@vger.kernel.org
Fixes: 57ada2fb2250 ("binder: add log information for binder transaction failures")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-8-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 122a3c1cb0ff304c2b8934584fcfea4edb2fe5e3 upstream.
Fix minor misspelling of the function in the comment section.
No functional changes in this patch.
Cc: stable@vger.kernel.org
Fixes: 0f966cba95c7 ("binder: add flag to clear buffer on txn complete")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-7-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3f489c2067c5824528212b0fc18b28d51332d906 upstream.
The mmap read lock is used during the shrinker's callback, which means
that using alloc->vma pointer isn't safe as it can race with munmap().
As of commit dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in
munmap") the mmap lock is downgraded after the vma has been isolated.
I was able to reproduce this issue by manually adding some delays and
triggering page reclaiming through the shrinker's debug sysfs. The
following KASAN report confirms the UAF:
==================================================================
BUG: KASAN: slab-use-after-free in zap_page_range_single+0x470/0x4b8
Read of size 8 at addr ffff356ed50e50f0 by task bash/478
CPU: 1 PID: 478 Comm: bash Not tainted 6.6.0-rc5-00055-g1c8b86a3799f-dirty #70
Hardware name: linux,dummy-virt (DT)
Call trace:
zap_page_range_single+0x470/0x4b8
binder_alloc_free_page+0x608/0xadc
__list_lru_walk_one+0x130/0x3b0
list_lru_walk_node+0xc4/0x22c
binder_shrink_scan+0x108/0x1dc
shrinker_debugfs_scan_write+0x2b4/0x500
full_proxy_write+0xd4/0x140
vfs_write+0x1ac/0x758
ksys_write+0xf0/0x1dc
__arm64_sys_write+0x6c/0x9c
Allocated by task 492:
kmem_cache_alloc+0x130/0x368
vm_area_alloc+0x2c/0x190
mmap_region+0x258/0x18bc
do_mmap+0x694/0xa60
vm_mmap_pgoff+0x170/0x29c
ksys_mmap_pgoff+0x290/0x3a0
__arm64_sys_mmap+0xcc/0x144
Freed by task 491:
kmem_cache_free+0x17c/0x3c8
vm_area_free_rcu_cb+0x74/0x98
rcu_core+0xa38/0x26d4
rcu_core_si+0x10/0x1c
__do_softirq+0x2fc/0xd24
Last potentially related work creation:
__call_rcu_common.constprop.0+0x6c/0xba0
call_rcu+0x10/0x1c
vm_area_free+0x18/0x24
remove_vma+0xe4/0x118
do_vmi_align_munmap.isra.0+0x718/0xb5c
do_vmi_munmap+0xdc/0x1fc
__vm_munmap+0x10c/0x278
__arm64_sys_munmap+0x58/0x7c
Fix this issue by performing instead a vma_lookup() which will fail to
find the vma that was isolated before the mmap lock downgrade. Note that
this option has better performance than upgrading to a mmap write lock
which would increase contention. Plus, mmap_write_trylock() has been
recently removed anyway.
Fixes: dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap")
Cc: stable@vger.kernel.org
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Minchan Kim <minchan@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-3-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ac061db9c58ca5b9270b1b3940d2464fb3ff183 upstream.
Use EPOLLERR instead of POLLERR to make sure it is cast to the correct
__poll_t type. This fixes the following sparse issue:
drivers/android/binder.c:5030:24: warning: incorrect type in return expression (different base types)
drivers/android/binder.c:5030:24: expected restricted __poll_t
drivers/android/binder.c:5030:24: got int
Fixes: f88982679f54 ("binder: check for binder_thread allocation failure in binder_poll()")
Cc: stable@vger.kernel.org
Cc: Eric Biggers <ebiggers@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-2-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bed9e27baf52a09b7ba2a3714f1e24e17ced386d upstream.
This reverts commit 5e2cf333b7bd5d3e62595a44d598a254c697cd74.
That commit introduced the following race and can cause system hung.
md_write_start: raid5d:
// mddev->in_sync == 1
set "MD_SB_CHANGE_PENDING"
// running before md_write_start wakeup it
waiting "MD_SB_CHANGE_PENDING" cleared
>>>>>>>>> hung
wakeup mddev->thread
...
waiting "MD_SB_CHANGE_PENDING" cleared
>>>> hung, raid5d should clear this flag
but get hung by same flag.
The issue reverted commit fixing is fixed by last patch in a new way.
Fixes: 5e2cf333b7bd ("md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d")
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231108182216.73611-2-junxiao.bi@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4fbd2f83fda0ca44a2ec6421ca3508b355b31858 upstream.
Since forcibly unoptimized kprobes will be put on the freeing_list directly
in the unoptimize_kprobe(), do_unoptimize_kprobes() must continue to check
the freeing_list even if unoptimizing_list is empty.
This bug can happen if a kprobe is put in an instruction which is in the
middle of the jump-replaced instruction sequence of an optprobe, *and* the
optprobe is recently unregistered and queued on unoptimizing_list.
In this case, the optprobe will be unoptimized forcibly (means immediately)
and put it into the freeing_list, expecting the optprobe will be handled in
do_unoptimize_kprobe().
But if there is no other optprobes on the unoptimizing_list, current code
returns from the do_unoptimize_kprobe() soon and does not handle the
optprobe which is on the freeing_list. Then the optprobe will hit the
WARN_ON_ONCE() in the do_free_cleaned_kprobes(), because it is not handled
in the latter loop of the do_unoptimize_kprobe().
To solve this issue, do not return from do_unoptimize_kprobes() immediately
even if unoptimizing_list is empty.
Moreover, this change affects another case. kill_optimized_kprobes() expects
kprobe_optimizer() will just free the optprobe on freeing_list.
So I changed it to just do list_move() to freeing_list if optprobes are on
unoptimizing list. And the do_unoptimize_kprobe() will skip
arch_disarm_kprobe() if the probe on freeing_list has gone flag.
Link: https://lore.kernel.org/all/Y8URdIfVr3pq2X8w@xpf.sh.intel.com/
Link: https://lore.kernel.org/all/167448024501.3253718.13037333683110512967.stgit@devnote3/
Fixes: e4add247789e ("kprobes: Fix optimize_kprobe()/unoptimize_kprobe() cancellation logic")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
[fp: adjust comment conflict regarding commit 223a76b268c9 ("kprobes: Fix
coding style issues")]
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7b99f75942da332e3f4f865e55a10fec95a30d4f upstream.
v1.25 of pahole supports filtering out functions with multiple inconsistent
function prototypes or optimized-out parameters from the BTF representation.
These present problems because there is no additional info in BTF saying which
inconsistent prototype matches which function instance to help guide attachment,
and functions with optimized-out parameters can lead to incorrect assumptions
about register contents.
So for now, filter out such functions while adding BTF representations for
functions that have "."-suffixes (foo.isra.0) but not optimized-out parameters.
This patch assumes that below linked changes land in pahole for v1.25.
Issues with pahole filtering being too aggressive in removing functions
appear to be resolved now, but CI and further testing will confirm.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230510130241.1696561-1-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
[ small context conflict because of not backported --lang_exclude=rust
option, which is not needed in 5.15 ]
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit bc7d0133181e5f33ac33ca4f6bb2bce876c8ad88 which is
commit c775cbf62ed4911e4f0f23880f01815753123690 upstream.
It is reported to cause problems, so drop it from the 5.15.y tree for now.
Link: https://lore.kernel.org/r/845b3053-d47b-4717-9665-79b120da133b@sirena.org.uk
Reported-by: Mark Brown <broonie@kernel.org>
Cc: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit df0cced74159c79e36ce7971f0bf250673296d93 upstream.
The TongFang GMxXGxx, which needs IRQ overriding for the keyboard to work,
is also sold as the Eluktronics RP-15 which does not use the standard
TongFang GMxXGxx DMI board_name.
Add an entry for this laptop to the irq1_edge_low_force_override[] DMI
table to make the internal keyboard functional.
Reported-by: Luis Acuna <ldacuna@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6e455f5dcdd15fa28edf0ffb5b44d3508512dccf ]
Commit 3823119b9c2b ("drm/crtc: Fix uninit-value bug in
drm_mode_setcrtc") was supposed to fix use of an uninitialized variable,
but introduced another.
num_connectors is only initialized if crtc_req->count_connectors > 0,
but it's used regardless. Fix it.
Fixes: 3823119b9c2b ("drm/crtc: Fix uninit-value bug in drm_mode_setcrtc")
Cc: syzbot+4fad2e57beb6397ab2fc@syzkaller.appspotmail.com
Cc: Ziqi Zhao <astrajoan@yahoo.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208131238.2924571-1-jani.nikula@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 643fe70e7bcdcc9e2d96952f7fc2bab56385cce5 ]
of_property_match_string returns an int; either an index from 0 or
greater if successful or negative on failure. Even it's very
unlikely that the DT CPU node contains multiple enable-methods
these checks should be fixed.
This patch was inspired by the work of Nick Desaulniers.
Link: https://lore.kernel.org/lkml/20230516-sunxi-v1-1-ac4b9651a8c1@google.com/T/
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20231228193903.9078-2-wahrenst@gmx.net
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9bf2e9165f90dc9f416af53c902be7e33930f728 ]
When a 'DEL_CLIENT' message is received from the remote, the corresponding
server port gets deleted. A DEL_SERVER message is then announced for this
server. As part of handling the subsequent DEL_SERVER message, the name-
server attempts to delete the server port which results in a '-ENOENT' error.
The return value from server_del() is then propagated back to qrtr_ns_worker,
causing excessive error prints.
To address this, return 0 from control_cmd_del_server() without checking the
return value of server_del(), since the above scenario is not an error case
and hence server_del() doesn't have any other error return value.
Signed-off-by: Sarannya Sasikumar <quic_sarannya@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af73483f4e8b6f5c68c9aa63257bdd929a9c194a ]
The IDA usually detects double-frees, but that detection failed to
consider the case when there are no nearby IDs allocated and so we have a
NULL bitmap rather than simply having a clear bit. Add some tests to the
test-suite to be sure we don't inadvertently reintroduce this problem.
Unfortunately they're quite noisy so include a message to disregard
the warnings.
Reported-by: Zhenghan Wang <wzhmmmmm@gmail.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19cde9c92b8d3b7ee555d0da3bcb0232d3a784f4 ]
Possible deadlock scenario (on reboot):
rk3x_i2c_xfer_common(polling)
-> rk3x_i2c_wait_xfer_poll()
-> rk3x_i2c_irq(0, i2c);
--> spin_lock(&i2c->lock);
...
<rk3x i2c interrupt>
-> rk3x_i2c_irq(0, i2c);
--> spin_lock(&i2c->lock); (deadlock here)
Store the IRQ number and disable/enable it around the polling transfer.
This patch has been tested on NanoPC-T4.
Signed-off-by: Jensen Huang <jensenhuang@friendlyarm.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99c7bb44f5749373bc01b73af02b50b69bcbf43d ]
Add a quirk for the Medion Lifetab S10346, this BYTCR tablet has no CHAN
package in its ACPI tables and uses SSP0-AIF1 rather then SSP0-AIF2 which
is the default for BYTCR devices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20231217213221.49424-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce038edfce43fb345f8dfdca0f7b17f535896701 ]
It possible that while the rx rb is being handled, the transport has
been stopped and re-started. In this case the tx queue pointer is not
yet initialized, which will lead to a NULL pointer dereference.
Fix it.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.cd0898cafd89.I0b84daae753ba9612092bf383f5c6f761446e964@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 335fe00319e030d481a54d5e0e68d50c5e672c0e ]
After the laptop lid is opened, and the device resumes from S3 deep
sleep, if the user presses a keyboard key while the screen is still black,
the mouse and keyboard become unusable.
Enabling this quirk prevents this behavior from occurring.
Signed-off-by: Esther Shimanovich <eshimanovich@chromium.org>
Link: https://lore.kernel.org/r/20231130195615.v2.1.Ibe78a9df97ecd18dc227a5cff67d3029631d9c11@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
