IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit 0bcb7efdff63564e80fe84dd36a9fbdfbf6697a4 upstream.
commit 4956e10903fd ("ARM: 6244/1: mmci: add variant data and default
MCICLOCK support") added variant data for ARM, U300 and Ux500 variants.
The Nomadik NHK8815/8820 variant was erroneously labeled as a U300
variant, and when the proper Nomadik variant was later introduced in
commit 34fd421349ff ("ARM: 7378/1: mmci: add support for the Nomadik MMCI
variant") this was not fixes. Let's say this fixes the latter commit as
there was no proper Nomadik support until then.
Fixes: 34fd421349ff ("ARM: 7378/1: mmci: add support for the Nomadik...")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e10c321977091f163eceedec0650e0ef4b3cf4bb upstream.
While in sdhci_execute_tuning() the choice whether or not to enable the
tuning is done on the actual timing, in the mmc_sdio_init_uhs_card() the
check is done on the capability of the card.
This difference is causing some issues with some SDIO cards in DDR50
mode where the CDM19 is wrongly issued.
With this patch we modify the check in both
mmc_(sd|sdio)_init_uhs_card() functions to take the proper decision
only according to the actual timing specification.
Signed-off-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c671c410c8704800f4f1673b6f572137e7e6ddd upstream.
sdhci has a legacy facility to prevent runtime suspend if the
bus power is on. This is needed in cases where the power to
the card is dependent on the bus power. It is controlled by
a pair of functions: sdhci_runtime_pm_bus_on() and
sdhci_runtime_pm_bus_off(). These functions use a boolean
variable 'bus_on' to ensure changes are always paired.
There is an additional check for 'runtime_suspended' which is
the problem. In fact, its use is ill-conceived as the only
requirement for the logic is that 'on' and 'off' are paired,
which is actually broken by the check, for example if the bus
power is turned on during runtime resume. So remove the check.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit adb24d42a516bca8b9741ed21206509daaab5b13 upstream.
Commit cc4f414c885c ("mmc: mmc: Add driver strength selection")
added driver strength selection for eMMC HS200 and HS400 modes.
That patch also set the driver stength when transitioning through
High Speed mode to HS200/HS400, but driver strength is not defined
for High Speed mode. While the JEDEC specification is not clear
on this point it has been observed to cause problems for some eMMC,
and removing the driver strength setting in this case makes it
consistent with the normal use of High Speed mode.
Signed-off-by: Wenkai Du <wenkai.du@intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d9bfbb95ed598a09cf336adb0f190ee0ff802f0d upstream.
The 'ocr' parameter passed to mmc_set_signal_voltage()
defines the power-on voltage used when power cycling
after a failure to set the voltage. However, in the
case of mmc_sdio_init_card(), the value passed has the
R4_18V_PRESENT flag set which is not valid for power-on
and results in an invalid vdd. Fix by passing the card's
ocr value which does not have the flag.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 347ea32dc118326c4f2636928239a29d192cc9b8 upstream.
SDHCI has built-in DMA called ADMA2. ADMA2 uses a descriptor
table to define DMA scatter-gather. Each desciptor can specify
a data length up to 65536 bytes, however the length field is
only 16-bits so zero means 65536. Consequently, putting zero
when the size is zero must not be allowed. This patch fixes
one case where zero data length could be set inadvertently.
The problem happens because unaligned data gets split and the
code did not consider that the remaining aligned portion might
be zero length. That case really only happens for SDIO because
SD and eMMC cards transfer blocks that are invariably sector-
aligned. For SDIO, access to function registers is done by
data transfer (CMD53) when the register is bigger than 1 byte.
Generally registers are 4 bytes but 2-byte registers are possible.
So DMA of 4 bytes or less can happen. When 32-bit DMA is used,
the data alignment must be 4, so 4-byte transfers won't casue a
problem, but a 2-byte transfer could. However with the introduction
of 64-bit DMA, the data alignment for 64-bit DMA was made 8 bytes,
so all 4-byte transfers not on 8-byte boundaries get "split" into
a 4-byte chunk and a 0-byte chunk, thereby hitting the bug.
In fact, a closer look at the SDHCI specs indicates that only the
descriptor table requires 8-byte alignment for 64-bit DMA. That
will be dealt with in a separate patch, but the potential for a
2-byte access remains, so this fix is needed anyway.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1ca896856281d3f1ad4f6f7d4e32e2943452de23 upstream.
In some cases, the stronger 33 Ohm driver strength must not be used
so it is not a suitable default. Change it to the standard default
50 Ohm value.
The patch applies to v4.2+ except the file name changed. It is
drivers/mmc/host/sdhci-pci.c prior to v.4.4.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 05caee939f8d58d81e962071da85761e1e3a4c73 upstream.
Commit bb08a7d489bd ("mmc: usdhi6rol0: fix NULL pointer deref in debug
print") fixed one NULL pointer dereference but unfortunately introduced
another. "data" may be NULL if this is a command timeout for a command
without any data, so we should only use it if we're actually waiting for
data.
Fixes: bb08a7d489bd ("mmc: usdhi6rol0: fix NULL pointer deref in debug print")
Signed-off-by: Rabin Vincent <rabin.vincent@axis.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f02b4b72d12cbae7020a959e2ed0410a464b4cc4 upstream.
clockevents_exchange_device is calling clockevents_shutdown() on the new
clockenvents device but it may have never been enabled in the first place.
This results in the tcb clock being disabled without being enabled first:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:680 clk_disable+0x28/0x34()
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.4.0+ #6
Hardware name: Atmel AT91SAM9
[<c000f2b8>] (unwind_backtrace) from [<c000d01c>] (show_stack+0x10/0x14)
[<c000d01c>] (show_stack) from [<c00172f0>] (warn_slowpath_common+0x78/0xa0)
[<c00172f0>] (warn_slowpath_common) from [<c00173a8>] (warn_slowpath_null+0x18/0x20)
[<c00173a8>] (warn_slowpath_null) from [<c0361528>] (clk_disable+0x28/0x34)
[<c0361528>] (clk_disable) from [<c034d560>] (tc_shutdown+0x38/0x4c)
[<c034d560>] (tc_shutdown) from [<c0059ad4>] (clockevents_switch_state+0x38/0x6c)
[<c0059ad4>] (clockevents_switch_state) from [<c0059b18>] (clockevents_shutdown+0x10/0x24)
[<c0059b18>] (clockevents_shutdown) from [<c005a458>] (tick_check_new_device+0x84/0xac)
[<c005a458>] (tick_check_new_device) from [<c0059660>] (clockevents_register_device+0x7c/0x108)
[<c0059660>] (clockevents_register_device) from [<c06b5a68>] (tcb_clksrc_init+0x390/0x3e8)
[<c06b5a68>] (tcb_clksrc_init) from [<c00097cc>] (do_one_initcall+0x114/0x1d4)
[<c00097cc>] (do_one_initcall) from [<c069bd54>] (kernel_init_freeable+0xfc/0x1b8)
[<c069bd54>] (kernel_init_freeable) from [<c04c3818>] (kernel_init+0x8/0xe0)
[<c04c3818>] (kernel_init) from [<c000a410>] (ret_from_fork+0x14/0x24)
---[ end trace 0000000000000001 ]---
Check what state we were in before trying to disable the clock.
Fixes: cf4541c101ea ("clockevents/drivers/tcb_clksrc: Migrate to new 'set-state' interface")
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: http://lkml.kernel.org/r/1452854061-30370-1-git-send-email-alexandre.belloni@free-electrons.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1b9f23727abb92c5e58f139e7d180befcaa06fe0 upstream.
The posix_clock_poll function is supposed to return a bit mask of
POLLxxx values. However, in case the hardware has disappeared (due to
hot plugging for example) this code returns -ENODEV in a futile
attempt to throw an error at the file descriptor level. The kernel's
file_operations interface does not accept such error codes from the
poll method. Instead, this function aught to return POLLERR.
The value -ENODEV does, in fact, contain the POLLERR bit (and almost
all the other POLLxxx bits as well), but only by chance. This patch
fixes code to return a proper bit mask.
Credit goes to Markus Elfring for pointing out the suspicious
signed/unsigned mismatch.
Reported-by: Markus Elfring <elfring@users.sourceforge.net>
igned-off-by: Richard Cochran <richardcochran@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Link: http://lkml.kernel.org/r/1450819198-17420-1-git-send-email-richardcochran@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 004fa08d7aba2a13974446bf212a48c0b3b0d9fd upstream.
When the GIC is using EOImode==1, the EOI is done immediately,
leaving the deactivation to be performed when the EOI was
previously done.
Unfortunately, the ITS is not aware of the EOImode at all, and
blindly EOIs the interrupt again. On most systems, this is ignored
(despite being a programming error), but some others do raise a
SError exception as there is no priority drop to perform for this
interrupt.
The fix is to stop trying to be clever, and always call into the
underlying GIC to perform the right access, irrespective of the
more we're in.
[Marc: Reworked commit message]
Fixes: 0b996fd35957a ("irqchip/GICv3: Convert to EOImode == 1")
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Ashok Kumar <ashoks@broadcom.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 49f34134aea74f19ca016f055d25ee55ec359dee upstream.
Atmel AIC has common structure for SMR (Source Mode Register).
bit[6:5] Interrupt source type
bit[2:0] Priority level
Other bits are unused.
To update new priority value, bit[2:0] should be cleared first and then
new priority level can be written. However, aic_common_set_priority()
helper clears source type bits instead of priority bits.
This patch fixes wrong mask bit operation.
Fixes: b1479ebb7720 "irqchip: atmel-aic: Add atmel AIC/AIC5 drivers"
Signed-off-by: Milo Kim <milo.kim@ti.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: Nicholas Ferre <nicolas.ferre@atmel.com>
Link: http://lkml.kernel.org/r/1452669592-3401-2-git-send-email-milo.kim@ti.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c5b635203032462603c503ecce91a7021c1ad44a upstream.
The rework of the driver missed to move the call to set_handle_irq() into
asm9260_of_init(). As a consequence no interrupt entry point is installed and
no interrupts are delivered
Solution is simple: Install the interrupt entry handler.
Fixes: 7e4ac676ee ("irqchip/mxs: Add Alphascale ASM9260 support")
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Cc: kernel@pengutronix.de
Cc: jason@lakedaemon.net
Cc: marc.zyngier@arm.com
Link: http://lkml.kernel.org/r/1454061473-24957-1-git-send-email-linux@rempel-privat.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d3b421cd07e4c0d4d6c0bbd55ca169c054fc081d upstream.
Under some conditions, irq sorting procedure used by INTC can go wrong
resulting in a spurious irq getting reported.
If this condition is not handled, it results in endless stream of:
unexpected IRQ trap at vector 00
messages from ack_bad_irq()
Handle the spurious interrupt condition in omap-intc driver to prevent this.
Measurements using kernel function profiler on AM335x EVM running at 720MHz
show that after this patch omap_intc_handle_irq() takes about 37.4us against
34us before this patch.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: http://lkml.kernel.org/r/9c78a6db02ac55f7af7371b417b6e414d2c3095b.1450188128.git.nsekhar@ti.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fadf3a44e974b030e7145218ad1ab25e3ef91738 upstream.
Connection child names associated to ports can sometimes be NULL,
which is the case when booting a system on QEMU or when the Coresight
power domain isn't switched on.
This patch is adding a check to make sure a NULL string isn't fed
to strcmp(), something that avoid crashing the system.
Reported-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 385277bfb57faac44e92497104ba542cdd82d5fe upstream.
When there is an error copying a chunk dm-snapshot can incorrectly hold
associated bios indefinitely, resulting in hung IO.
The function copy_callback sets pe->error if there was error copying the
chunk, and then calls complete_exception. complete_exception calls
pending_complete on error, otherwise it calls commit_exception with
commit_callback (and commit_callback calls complete_exception).
The persistent exception store (dm-snap-persistent.c) assumes that calls
to prepare_exception and commit_exception are paired.
persistent_prepare_exception increases ps->pending_count and
persistent_commit_exception decreases it.
If there is a copy error, persistent_prepare_exception is called but
persistent_commit_exception is not. This results in the variable
ps->pending_count never returning to zero and that causes some pending
exceptions (and their associated bios) to be held forever.
Fix this by unconditionally calling commit_exception regardless of
whether the copy was successful. A new "valid" parameter is added to
commit_exception -- when the copy fails this parameter is set to zero so
that the chunk that failed to copy (and all following chunks) is not
recorded in the snapshot store. Also, remove commit_callback now that
it is merely a wrapper around pending_complete.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 512167788a6fe9481a33a3cce5f80b684631a1bb upstream.
Remove the unused struct block_op pointer that was inadvertantly
introduced, via cut-and-paste of previous brb_op() code, as part of
commit 50dd842ad.
(Cc'ing stable@ because commit 50dd842ad did)
Fixes: 50dd842ad ("dm space map metadata: fix ref counting bug when bootstrapping a new space map")
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e8beb02343e7582980c6705816cd957cf4f74c7a upstream.
The tda1004x was updating the properties cache before locking.
If the device is not locked, the data at the registers are just
random values with no real meaning.
This caused the driver to fail with libdvbv5, as such library
calls GET_PROPERTY from time to time, in order to return the
DVB stats.
Tested with a saa7134 card 78:
ASUSTeK P7131 Dual, vendor PCI ID: 1043:4862
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4623e5967448444a4ea1e77beb58898c4af48693 upstream.
In the 3.17 kernel the poll() behavior changed for output streams:
as long as not all buffers were queued up poll() would return that
userspace can write. This is fine for the write() call, but when
using stream I/O this changed the behavior since the expectation
was that it would wait for buffers to become available for dequeuing.
This patch only enables the check whether you can queue buffers
for file I/O only, and skips it for stream I/O.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d2cc2f0b35465951eaaf0387fd55e29835ed7ea6 upstream.
A previous patch added a check if the firmware is too big, but it didn't
set the return error code with the right value.
[mchehab@osg.samsung.com: I ended by applying a v1 of Laura's patch, without
the proper return code. This patch contains the difference between v2 and v1 of
the Laura's "si2157: Bounds check firmware" patch]
Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Reviewed-by: Olli Salonen <olli.salonen@iki.fi>
Tested-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
commit c9d57de6103e343f2d4e04ea8d9e417e10a24da7 upstream.
When in FE_TUNE_MODE_ONESHOT the frontend must report
the actual capabilities so user can take appropriate
action.
With frontends that can't do auto inversion this is done
by dvb-core automatically so CAN_INVERSION_AUTO is valid.
However, when in FE_TUNE_MODE_ONESHOT this is not true.
So only set FE_CAN_INVERSION_AUTO in modes other than
FE_TUNE_MODE_ONESHOT
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 768acf46e1320d6c41ed1b7c4952bab41c1cde79 upstream.
The driver allocates the spinlock but fails to initialize it correctly.
The kernel reports a BUG indicating bad spinlock magic when spinlock
debugging is enabled.
Call spin_lock_init() on it to initialize it correctly.
Fixes: b4e3e59fb59c ("[media] rc: add sunxi-ir driver")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d4565649b6d6923369112758212b851adc407f0c upstream.
both do_last() and walk_component() risk picking a NULL inode out
of dentry about to become positive, *then* checking its flags and
seeing that it's not negative anymore and using (already stale by
then) value they'd fetched earlier. Usually ends up oopsing soon
after that...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7326fffb712f09a315bc73cc1ee63843f59b8bd4 upstream.
This patch address a possible security issue:
The request field in client notify request ioctl comes from user space
as u32 and is downcasted to u8 with out validation.
Check request field to have approved values
MEI_HBM_NOTIFICATION_STAR/STOP
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ed6dc538e5a36a331b6256d54f435c80f6715460 upstream.
fasync should return a negative value on error
and not poll mask POLLERR.
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7079604ddb83f428359feace3aeaf8a9f435be4a upstream.
This driver has a number of errors in the module initialization. These
include the following:
Parameter msi_support is stored in two places - one is removed.
Paramters sw_crypto and disable_watchdog were never stored in the final
locations, nor were they initialized properly.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 06f34572c6110e2e2d5e653a957f1d74db9e3f2b upstream.
In this driver, parameters disable_watchdog and sw_crypto are never
copied into the locations used in the main code. While modifying the
parameter handling, the copying of parameter msi_support is moved to
be with the rest.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7503efbd82c15c4070adffff1344e5169d3634b4 upstream.
Two of the module parameter descriptions show incorrect default values.
In addition the value for software encryption is not transferred to
the locations used by the driver.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 793b09994211fbe0b5cd5f7b6dd8cc9b6256c3c6 upstream.
This driver has some errors in the handling of module parameters. These
include missing initialization for parameters msi_support and
disable_watchdog. In addition, neither of these parameters nor sw_crypto
are transferred into the locations used by the driver. A final fix is
adding parameter msi to the module named and description macros.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d4d60b4caaa5926e1b243070770968f05656107a upstream.
Two of the module parameters are listed with incorrect default values.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b24f19f16b9e43f54218c07609b783ea8625406a upstream.
The module parameter for software encryption was never transferred to
the location used by the driver.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b68d0ae7e58624c33f2eddab471fee55db27dbf9 upstream.
This driver fails to copy the module parameter for software encryption
to the locations used by the main code.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f99551a2d39dc26ea03dc6761be11ac913eb2d57 upstream.
In commit 38506ecefab9 (rtlwifi: rtl_pci: Start modification for new
drivers), a bug was introduced that causes a NULL pointer dereference.
As this bug only affects the infrequently used RTL8192EE and only under
low-memory conditions, it has taken a long time for the bug to show up.
The bug was reported on the linux-wireless mailing list and also at
https://bugs.launchpad.net/ubuntu/+source/ubuntu-release-upgrader/ as
bug #1527603 (kernel crashes due to rtl8192ee driver on ubuntu 15.10).
Fixes: 38506ecefab9 ("rtlwifi: rtl_pci: Start modification for new drivers")
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f3697e24dc3820b10f445a4a7d914fc356012d1 upstream.
Dmitry reported that he was able to reproduce the WARN_ON_ONCE that
fires in locks_free_lock_context when the flc_posix list isn't empty.
The problem turns out to be that we're basically rebuilding the
file_lock from scratch in fcntl_setlk when we discover that the setlk
has raced with a close. If the l_whence field is SEEK_CUR or SEEK_END,
then we may end up with fl_start and fl_end values that differ from
when the lock was initially set, if the file position or length of the
file has changed in the interim.
Fix this by just reusing the same lock request structure, and simply
override fl_type value with F_UNLCK as appropriate. That ensures that
we really are unlocking the lock that was initially set.
While we're there, make sure that we do pop a WARN_ON_ONCE if the
removal ever fails. Also return -EBADF in this event, since that's
what we would have returned if the close had happened earlier.
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Fixes: c293621bbf67 (stale POSIX lock handling)
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a7df4716d19594b7b3f106f0bc0ca1c548e508e6 upstream.
Similarly to commit fb1770aa78a43530940d0c2dd161e77bc705bdac, with gcc 5
on Ubuntu and CONFIG_STATIC_LINK=y I was seeing these linker errors:
/usr/lib/gcc/x86_64-linux-gnu/5/../../../x86_64-linux-gnu/librt.a(timer_create.o): In function `__timer_create_new':
(.text+0xcd): undefined reference to `pthread_once'
/usr/lib/gcc/x86_64-linux-gnu/5/../../../x86_64-linux-gnu/librt.a(timer_create.o): In function `__timer_create_new':
(.text+0x126): undefined reference to `pthread_attr_init'
/usr/lib/gcc/x86_64-linux-gnu/5/../../../x86_64-linux-gnu/librt.a(timer_create.o): In function `__timer_create_new':
(.text+0x168): undefined reference to `pthread_attr_setdetachstate'
[...]
Obviously we also need -lpthread for librt.a.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9f2dfda2f2f1c6181c3732c16b85c59ab2d195e0 upstream.
An inverted return value check in hostfs_mknod() caused the function
to return success after handling it as an error (and cleaning up).
It resulted in the following segfault when trying to bind() a named
unix socket:
Pid: 198, comm: a.out Not tainted 4.4.0-rc4
RIP: 0033:[<0000000061077df6>]
RSP: 00000000daae5d60 EFLAGS: 00010202
RAX: 0000000000000000 RBX: 000000006092a460 RCX: 00000000dfc54208
RDX: 0000000061073ef1 RSI: 0000000000000070 RDI: 00000000e027d600
RBP: 00000000daae5de0 R08: 00000000da980ac0 R09: 0000000000000000
R10: 0000000000000003 R11: 00007fb1ae08f72a R12: 0000000000000000
R13: 000000006092a460 R14: 00000000daaa97c0 R15: 00000000daaa9a88
Kernel panic - not syncing: Kernel mode fault at addr 0x40, ip 0x61077df6
CPU: 0 PID: 198 Comm: a.out Not tainted 4.4.0-rc4 #1
Stack:
e027d620 dfc54208 0000006f da981398
61bee000 0000c1ed daae5de0 0000006e
e027d620 dfcd4208 00000005 6092a460
Call Trace:
[<60dedc67>] SyS_bind+0xf7/0x110
[<600587be>] handle_syscall+0x7e/0x80
[<60066ad7>] userspace+0x3e7/0x4e0
[<6006321f>] ? save_registers+0x1f/0x40
[<6006c88e>] ? arch_prctl+0x1be/0x1f0
[<60054985>] fork_handler+0x85/0x90
Let's also get rid of the "cosmic ray protection" while we're at it.
Fixes: e9193059b1b3 "hostfs: fix races in dentry_name() and inode_name()"
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0754fb298f2f2719f0393491d010d46cfb25d043 upstream.
I was seeing some really weird behaviour where piping UML's output
somewhere would cause output to get duplicated:
$ ./vmlinux | head -n 40
Checking that ptrace can change system call numbers...Core dump limits :
soft - 0
hard - NONE
OK
Checking syscall emulation patch for ptrace...Core dump limits :
soft - 0
hard - NONE
OK
Checking advanced syscall emulation patch for ptrace...Core dump limits :
soft - 0
hard - NONE
OK
Core dump limits :
soft - 0
hard - NONE
This is because these tests do a fork() which duplicates the non-empty
stdout buffer, then glibc flushes the duplicated buffer as each child
exits.
A simple workaround is to flush before forking.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1b17cb796f5d40ffa239c6926385abd83a77a49b upstream.
git commit 904818e2f229f3d94ec95f6932a6358c81e73d78
"s390/kernel: introduce fpu-internal.h with fpu helper functions"
introduced the fpregs_store / fp_regs_load helper. These function
fail to save and restore the floating pointer control registers.
The effect is that the FPC is not correctly handled on signal
delivery and signal return.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 342300cc9cd3428bc6bfe5809bfcc1b9a0f06702 upstream.
git commit 8070361799ae1e3f4ef347bd10f0a508ac10acfb
"s390: add support for vector extension"
broke 31-bit compat processes in regard to signal handling.
The restore_sigregs_ext32() function is used to restore the additional
elements from the user space signal frame. Among the additional elements
are the upper registers halves for 64-bit register support for 31-bit
processes. The copy_from_user that is used to retrieve the high-gprs
array from the user stack uses an incorrect length, 8 bytes instead of
64 bytes. This causes incorrect upper register halves to get loaded.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 12d319b920fa673a4d5e7c1785c5dc82dcd15257 upstream.
Commit ca369d51b ("sd: Fix device-imposed transfer length limits")
introduced a new queue limit max_dev_sectors which limits the maximum
sectors for requests. The default value leads to small dasd requests
and therefor to a performance drop.
Set the max_dev_sectors value to the same value as the max_hw_sectors
to use the maximum available request size for DASD devices.
Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9d862ababb609439c5d6987f6d3ddd09e703aa0b upstream.
Add refcount to the DASD device when a summary unit check worker is
scheduled. This prevents that the device is set offline with worker
in place.
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 020bf042e5b397479c1174081b935d0ff15d1a64 upstream.
The channel checks the specified length and the provided amount of
data for CCWs and provides an incorrect length error if the size does
not match. Under z/VM with simulation activated the length may get
changed. Having the suppress length indication bit set is stated as
good CCW coding practice and avoids errors under z/VM.
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bcb7825a77f41c7dd91da6f7ac10b928156a322e upstream.
The normalization pass in the sorting routine of the relative exception
table serves two purposes:
- it ensures that the address fields of the exception table entries are
fully ordered, so that no ambiguities arise between entries with
identical instruction offsets (i.e., when two instructions that are
exactly 8 bytes apart each have an exception table entry associated with
them)
- it ensures that the offsets of both the instruction and the fixup fields
of each entry are relative to their final location after sorting.
Commit eb608fb366de ("s390/exceptions: switch to relative exception table
entries") ported the relative exception table format from x86, but modified
the sorting routine to only normalize the instruction offset field and not
the fixup offset field. The result is that the fixup offset of each entry
will be relative to the original location of the entry before sorting,
likely leading to crashes when those entries are dereferenced.
Fixes: eb608fb366de ("s390/exceptions: switch to relative exception table entries")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 546bed631203344611f42b2af1d224d2eedb4e6b upstream.
I managed to trigger this:
| INFO: trying to register non-static key.
| the code is fine but needs lockdep annotation.
| turning off the locking correctness validator.
| CPU: 1 PID: 781 Comm: systemd-gpt-aut Not tainted 4.4.0-rt2+ #14
| Hardware name: ARM-Versatile Express
| [<80307cec>] (dump_stack)
| [<80070e98>] (__lock_acquire)
| [<8007184c>] (lock_acquire)
| [<80287800>] (btrfs_ioctl)
| [<8012a8d4>] (do_vfs_ioctl)
| [<8012ac14>] (SyS_ioctl)
so I think that btrfs_device_data_ordered_init() is not invoked behind
a macro somewhere.
Fixes: 7cc8e58d53cd ("Btrfs: fix unprotected device's variants on 32bits machine")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 271dba4521aed0c37c063548f876b49f5cd64b2e upstream.
If we failed to create a hard link we were not always releasing the
the transaction handle we got before, resulting in a memory leak and
preventing any other tasks from being able to commit the current
transaction.
Fix this by always releasing our transaction handle.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9269d12b2d57d9e3d13036bb750762d1110d425c upstream.
We weren't accounting for the insertion of an inline extent item for the
symlink inode nor that we need to update the parent inode item (through
the call to btrfs_add_nondir()). So fix this by including two more
transaction units.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a879719b8c90e15c9e7fa7266d5e3c0ca962f9df upstream.
When a symlink is successfully created it always has an inline extent
containing the source path. However if an error happens when creating
the symlink, we can leave in the subvolume's tree a symlink inode without
any such inline extent item - this happens if after btrfs_symlink() calls
btrfs_end_transaction() and before it calls the inode eviction handler
(through the final iput() call), the transaction gets committed and a
crash happens before the eviction handler gets called, or if a snapshot
of the subvolume is made before the eviction handler gets called. Sadly
we can't just avoid this by making btrfs_symlink() call
btrfs_end_transaction() after it calls the eviction handler, because the
later can commit the current transaction before it removes any items from
the subvolume tree (if it encounters ENOSPC errors while reserving space
for removing all the items).
So make send fail more gracefully, with an -EIO error, and print a
message to dmesg/syslog informing that there's an empty symlink inode,
so that the user can delete the empty symlink or do something else
about it.
Reported-by: Stephen R. van den Berg <srb@cuci.nl>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
