IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Since commit 1fffe7a34c89 ("script: modpost: emit a warning when the
description is missing"), a module without a MODULE_DESCRIPTION() will
result in a warning with make W=1. The following warning is being
observed when ARCH=mips and CONFIG_SIBYTE_TBPROF=m:
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/mips/sibyte/common/sb_tbprof.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When the CM block migrated from CM2.5 to CM3.0, the address offset for
the Global CSR Access Privilege register was modified. We saw this in
the "MIPS64 I6500 Multiprocessing System Programmer's Guide," it is
stated that "the Global CSR Access Privilege register is located at
offset 0x0120" in section 5.4. It is at least the same for I6400.
This fix allows to use the VP cores in SMP mode if the reset values
were modified by the bootloader.
Based on the work of Vladimir Kondratiev
<vladimir.kondratiev@mobileye.com> and the feedback from Jiaxun Yang
<jiaxun.yang@flygoat.com>.
Fixes: 197e89e0984a ("MIPS: mips-cm: Implement mips_cm_revision")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Nowadays SYNC_R4K is performing better than Loongson64's
custom sync mechanism.
Switch to SYNC_R4K to improve performance and reduce code
duplication.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add ip30_defconfig derived from ip27_defconfig to ensure this
target is build tested by various kernel testing projects.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Regenerate defconfig to include some drivers that are used
by this platform, including sm712fb, simplefb, rtl8187.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The LiteX framework provides a convenient and efficient infrastructure
to create FPGA Cores/SoCs.
We have implemented LiteX support for a couple of opensource MIPS
CPU cores including microAptiv UP from MIPS, GS232 from Loongson,
and CDIM from CQU.
For this platform, devicetree is generated by litex python scripts
so there is no devicetree addition necessary.
Link: https://github.com/enjoy-digital/litex/pull/1990
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
All MIPS64R6 cores so far supports MSA and vz, so it makes sense
to enable them in 64R6 default config.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Fallback march for SB1 should be mips64 instead of mips64r1.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407111851.LwDasTcp-lkp@intel.com/
Fixes: bfc0a330c1b4 ("MIPS: Fallback CPU -march flag to ISA level if unsupported")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add support for the RTL9302 SoC and the RTL9302C_2xRTL8224_2XGE
reference board.
The RTL930x family of SoCs are Realtek switches with an embedded MIPS
core (800MHz 34Kc). Most of the peripherals are similar to the RTL838x
SoC and can make use of many existing drivers.
Add in full DSA switch support is still a work in progress.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The bootloader used on the Realtek RTL9302C boards is an ancient vendor
fork of U-Boot that doesn't understand device trees. So to run a modern
kernel it is necessary use one of the APPENDED_DTB options.
When appending the DTB the inintrd information, if present, needs to be
inserted into the /chosen device tree node. The bootloader provides the
initrd start/size via the firmware environment. Add a fdt fixup that
will update the device tree with the initrd information.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When MACH_REALTEK_RTL is selected automatically select the
REALTEK_OTTO_TIMER option in order to support the Realtek platforms that
require it.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add a compatible string for the interrupt controller found on the
rtl930x SoCs. The interrupt controller has registers for VPE1 so these
are added as a second reg cell.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add the rtl9302 SoC and the Cameo RTL9302C_2xRTL8224_2XGE reference
board to the list of Realtek compatible strings.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add entry for Cameo Communications (https://www.cameo.com.tw/)
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add device_type = "cpu" to the cpu node for the rtl838x SoC. This
resolves the following dtbs_check complaint:
cpus: cpu@0: 'cache-level' is a required property
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Update the node name for the UARTs to resolve the following dtbs_check
complaints:
uart@2000: $nodename:0: 'uart@2000' does not match '^serial(@.*)?$'
uart@2100: $nodename:0: 'uart@2100' does not match '^serial(@.*)?$'
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Implement ieee754 NAN2008 emulation mode.
When this mode is enabled, kernel will accept ELF file
compiled for both NaN 2008 and NaN legacy, but if hardware
does not have capability to match ELF's NaN mode, __own_fpu
will fail for corresponding thread and fpuemu will then kick
in.
This mode trade performance for correctness, while maintaining
support for both NaN mode regardless of hardware capability.
It is useful for multilib installation that have both types
of binary exist in system.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This adds code to initialize the USB controller and PHY also on Danube,
Amazon SE and AR10. This code is based on the Vendor driver from
different UGW versions and compared to the hardware documentation.
This patch is included in OpenWrt for many years.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
With CM 3.5 the "core-other" register block evolves into the "redirect"
register block, which is capable of accessing not only the core local
registers of other cores but also the shared/global registers of other
clusters.
This patch generates accessor functions for shared/global registers
accessed via the redirect block, with "redir_" inserted after "gic_" in
their names. For example the accessor function:
read_gic_config()
...accesses the GIC_CONFIG register of the GIC in the local cluster.
With this patch a new function:
read_gic_redir_config()
...is added which accesses the GIC_CONFIG register of the GIC in
whichever cluster the GCR_CL_REDIRECT register is configured to access.
This mirrors the similar redirect block accessors already provided for
the CM & CPC.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Signed-off-by: Chao-ying Fu <cfu@wavecomp.com>
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This patch introduces a couple of utility functions which help later
patches with introducing support for multi-cluster systems.
- mips_cps_multicluster_cpus() allows its caller to determine whether
the system includes CPUs spread across multiple clusters. This is
useful because in some cases behaviour can be more optimal taking
this knowledge into account. The means by which we check this is
dependent upon the way we probe CPUs & assign their numbers, so
keeping this knowledge confined here in arch/mips/ seems appropriate.
- mips_cps_first_online_in_cluster() allows its caller to determine
whether it is running upon the first CPU online within its cluster.
This information is useful in cases where some cluster-wide
configuration may need to occur, but should not be repeated if
another CPU in the cluster is already online. Similarly to the above
this is determined based upon knowledge of CPU numbering so it makes
sense to keep that knowledge in arch/mips/. The function is defined
in mips-cm.c rather than in asm/mips-cps.h in order to allow us to
use asm/cpu-info.h & linux/smp.h without encountering an include
nightmare.
Signed-off-by: Paul Burton <paulburton@kernel.org>
Signed-off-by: Chao-ying Fu <cfu@wavecomp.com>
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This does not matter the least, but there is no other .[ch] file in the
repo that is executable, so clean this up.
Fixes: 29b83a64df3b ("MIPS: Octeon: Add PCIe link status check")
Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The OLB ("Other Logic Block") is a system-controller region hosting
clock, reset and pin controllers. It contains registers such as I2C
speed mode that need to be accessible by other nodes.
Remove fixed-clocks previously used; replace references.
Add parent crystal clock, fixed at 30MHz.
Add pin nodes for all functions.
Add mobileye,eyeq5-olb compatible node, hosting clk, reset and pinctrl.
Add reset and pinctrl references to UART nodes.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add documentation to describe the "Other Logic Block" system-controller.
It deals with three platforms: EyeQ5, EyeQ6L and EyeQ6H. First two have
a single instance, whereas EyeQ6H has seven named instances.
Features provided are:
- Clocks, children to main crystal. Some PLLs and divider clocks.
- Resets. Some instances DO NOT have reset.
- Pinctrl. Only EyeQ5 has such feature.
Those are NOT the only features exposed in OLB system-controllers! Many
individual registers, related to IP block integration, can be found.
Additional features will be exposed over time.
We simplify devicetree phandles to OLB in two ways:
- Compatibles exposing a single clock do not ask for a index argument.
This means we use EyeQ6H OLB south (it has four clocks):
clocks = <&olb_south EQ6HC_SOUTH_PLL_PER>;
But use EyeQ6H OLB east (it has one clock):
clocks = <&olb_east>;
- Compatibles exposing a single reset domain do not ask for a domain
index, only a reset index.
This means we use EyeQ5 OLB (it has three domains):
resets = <&olb 0 10>;
But use EyeQ6H west reset (it has one domain):
resets = <&olb_west 3>;
About pinctrl subnodes: all pins have two functionality, either GPIO or
something-else. The latter is pin dependent, we express constraints
using many if-then.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Switch to use software nodes/properties to describe GPIOs for the
ADS7846 touchscreen and the SPI controller (away from using GPIO lookup
tables). This allows removing use of ADS7846 platform data, which will
be going away.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The original sync-r4k did a good job on reducing jitter by determine
the "next time value", but it has a limitation that when synchronization
being performed too many times due to high core count or CPU hotplug,
the timewrap on CPU0 will become unaccpetable.
Rework the mechanism based on latest x86 tsc_sync. (It seems like
the original implementation is based on tsc_sync at that time,
so it's just a refresh.) To improve overall performance.
Tesed on Loongson64, Boston, QEMU.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When we have more than one CPU in system, counter synchronisation
overhead can lead to a scenario that sched_clock goes backward when
being read from different CPUs.
This is accommodated by CONFIG_HAVE_UNSTABLE_SCHED_CLOCK, but it's
unavailable on 32bit kernel.
We don't want to risk sched_clock correctness, so if we have multiple
CPU in system and CONFIG_HAVE_UNSTABLE_SCHED_CLOCK is not set, we just
don't use counter as sched_clock source.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
csrc-r4k suffers from SMP synchronization overhead.
Select HAVE_UNSTABLE_SCHED_CLOCK to workaround drift
between the CPUs on the system. HAVE_UNSTABLE_SCHED_CLOCK
requires cmpxchg64, so enable it for 64 bits only.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
CP0 counter suffers from various problems like SMP sync,
behaviour on wait.
Set CLOCK_SOURCE_MUST_VERIFY and CLOCK_SOURCE_VERIFY_PERCPU,
as what x86 did to TSC, to let kernel test it before use.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Increase frequency addend dividend to 10000000 (10MHz) to
reasonably accommodate multi GHz level mips_hpt_frequency.
Cap rating of csrc-r4k into 299 to ensure it doesn't go into
"Desired" range, given all the drama we have with CP0 count
registers (SMP sync, behaviour on wait etc).
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The data RAC is left disabled by the bootloader in some SoCs, at least in
the core it boots from.
Enabling this feature increases the performance up to +30% depending on the
task.
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[ rework code and reduce code duplication ]
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add support to provide CBR address from DT to handle broken
SoC/Bootloader that doesn't correctly init it. This permits to use the
RAC flush even in these condition.
To provide a CBR address from DT, the property "brcm,bmips-cbr-reg"
needs to be set in the "cpus" node. On DT init, this property presence
will be checked and will set the bmips_cbr_addr value accordingly. Also
bmips_rac_flush_disable will be set to false as RAC flush can be
correctly supported.
The CBR address from DT will overwrite the cached one and the
one set in the CBR register will be ignored.
Also the DT CBR address is validated on being outside DRAM window.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Document brcm,bmips-cbr-reg property.
Some SoC suffer from a BUG where CBR(Core Base Register)
address might be badly or never initialized by the Bootloader
or reading it from co-processor registers, if the system boots
from secondary CPU, results in invalid address.
The CBR address is always the same on the SoC.
Usage of this property is to give an address also in these broken
configuration/bootloader.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Rework the handling of the CBR address and cache it. This address
doesn't change and can be cached instead of reading the register every
time.
This is in preparation of permitting to tweak the CBR address in DT with
broken SoC or bootloader.
bmips_cbr_addr is defined in setup.c for each arch to keep compatibility
with legacy brcm47xx/brcm63xx and generic BMIPS target.
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Somehow those enablement bits were left over when we were
adding initial Loongson-2K support.
Set up basic information and select proper builtin DTB for
Loongson-2K.
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Some firmware implementations require restoring ra and sp to be
passed as arguments.
Passing them as necessary.
Fixes: 68557c59a550 ("MIPS: Loongson64: Implement PM suspend for LEFI firmware")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
We should always use firmware's poweroff & reboot service
if it's available as firmware may need to perform more task
than platform's syscon etc.
However _machine_restart & poweroff hooks are registered at
low priority, which means platform reboot driver can override
them.
Register firmware based reboot/poweroff implementation with
register_sys_off_handler with appropriate priority so that
they will be prioritised. Remove _machine_halt hook as it's
deemed to be unnecessary.
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
cpu_hwmon is unsupported on CPUs without loongson_chiptemp
register and csr.
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Some global register address variable may be missing on
specific CPU type, test them before use them.
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
ISA node is required by Loongson64 platforms to initialize
PIO support.
Kernel will hang at boot without ISA node.
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
phy-mode should be rgmii-id to match hardware configuration.
Also there should be a phy-handle to reference phy node.
Fixes: f8a11425075f ("MIPS: Loongson64: Add GMAC support for Loongson-2K1000")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The correct interrupt line for RTC is line 8 on liointc1.
Fixes: e47084e116fc ("MIPS: Loongson64: DTS: Add RTC support to Loongson-2K1000")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
All internal liointc interrupts are high level triggered.
Fixes: b1a792601f26 ("MIPS: Loongson64: DeviceTree for Loongson-2K1000")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Builtin DTBS should never contain memory node as memory is
going to be managed by LEFI interface.
Remove memory node to prevent confliction.
Fixes: b1a792601f26 ("MIPS: Loongson64: DeviceTree for Loongson-2K1000")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This is almost compatible, but passing a negative offset should result
in a EINVAL error, but on mips o32 compat mode would seek to a large
32-bit byte offset.
Use compat_sys_lseek() to correctly sign-extend the argument.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Target register of mftc0 should be __res instead of $1, this is
a leftover from old .insn code.
Fixes: dd6d29a61489 ("MIPS: Implement microMIPS MT ASE helpers")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
With ARCH=mips, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/mips/crypto/poly1305-mips.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Include linux/processor.h to fix build error:
arch/mips/sgi-ip30/ip30-console.c: In function ‘prom_putchar’:
arch/mips/sgi-ip30/ip30-console.c:21:17: error: implicit declaration of function ‘cpu_relax’ [-Werror=implicit-function-declaration]
21 | cpu_relax();
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This reverts commit 277a0363120276645ae598d8d5fea7265e076ae9.
While fixing old boards with broken DTs, this change will break
newer ones with correct gpio polarity annotation.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
