IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 3b1c92f8e5371700fada307cc8fd2c51fa7bc8c1 ]
The assignment of pps_enable is protected by tmreg_lock, but the read
operation of pps_enable is not. So the Coverity tool reports a lock
evasion warning which may cause data race to occur when running in a
multithread environment. Although this issue is almost impossible to
occur, we'd better fix it, at least it seems more logically reasonable,
and it also prevents Coverity from continuing to issue warnings.
Fixes: 278d24047891 ("net: fec: ptp: Enable PPS output based on ptp clock")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://lore.kernel.org/r/20240521023800.17102-1-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2a4d4a6a0bf5eba66f8b0b32502cc20d82715a0 ]
If the load access fault occures in a leaf function (with
CONFIG_FRAME_POINTER=y), when wrong stack trace will be displayed:
[<ffffffff804853c2>] regmap_mmio_read32le+0xe/0x1c
---[ end trace 0000000000000000 ]---
Registers dump:
ra 0xffffffff80485758 <regmap_mmio_read+36>
sp 0xffffffc80200b9a0
fp 0xffffffc80200b9b0
pc 0xffffffff804853ba <regmap_mmio_read32le+6>
Stack dump:
0xffffffc80200b9a0: 0xffffffc80200b9e0 0xffffffc80200b9e0
0xffffffc80200b9b0: 0xffffffff8116d7e8 0x0000000000000100
0xffffffc80200b9c0: 0xffffffd8055b9400 0xffffffd8055b9400
0xffffffc80200b9d0: 0xffffffc80200b9f0 0xffffffff8047c526
0xffffffc80200b9e0: 0xffffffc80200ba30 0xffffffff8047fe9a
The assembler dump of the function preambula:
add sp,sp,-16
sd s0,8(sp)
add s0,sp,16
In the fist stack frame, where ra is not stored on the stack we can
observe:
0(sp) 8(sp)
.---------------------------------------------.
sp->| frame->fp | frame->ra (saved fp) |
|---------------------------------------------|
fp->| .... | .... |
|---------------------------------------------|
| | |
and in the code check is performed:
if (regs && (regs->epc == pc) && (frame->fp & 0x7))
I see no reason to check frame->fp value at all, because it is can be
uninitialized value on the stack. A better way is to check frame->ra to
be an address on the stack. After the stacktrace shows as expect:
[<ffffffff804853c2>] regmap_mmio_read32le+0xe/0x1c
[<ffffffff80485758>] regmap_mmio_read+0x24/0x52
[<ffffffff8047c526>] _regmap_bus_reg_read+0x1a/0x22
[<ffffffff8047fe9a>] _regmap_read+0x5c/0xea
[<ffffffff80480376>] _regmap_update_bits+0x76/0xc0
...
---[ end trace 0000000000000000 ]---
As pointed by Samuel Holland it is incorrect to remove check of the stackframe
entirely.
Changes since v2 [2]:
- Add accidentally forgotten curly brace
Changes since v1 [1]:
- Instead of just dropping frame->fp check, replace it with validation of
frame->ra, which should be a stack address.
- Move frame pointer validation into the separate function.
[1] https://lore.kernel.org/linux-riscv/20240426072701.6463-1-dev.mbstr@gmail.com/
[2] https://lore.kernel.org/linux-riscv/20240521131314.48895-1-dev.mbstr@gmail.com/
Fixes: f766f77a74f5 ("riscv/stacktrace: Fix stack output without ra on the stack top")
Signed-off-by: Matthew Bystrin <dev.mbstr@gmail.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240521191727.62012-1-dev.mbstr@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ffbf4fb9b5c12ff878a10ea17997147ea4ebea6f ]
When CONFIG_DEBUG_BUGVERBOSE=n, we fail to add necessary padding bytes
to bug_table entries, and as a result the last entry in a bug table will
be ignored, potentially leading to an unexpected panic(). All prior
entries in the table will be handled correctly.
The arm64 ABI requires that struct fields of up to 8 bytes are
naturally-aligned, with padding added within a struct such that struct
are suitably aligned within arrays.
When CONFIG_DEBUG_BUGVERPOSE=y, the layout of a bug_entry is:
struct bug_entry {
signed int bug_addr_disp; // 4 bytes
signed int file_disp; // 4 bytes
unsigned short line; // 2 bytes
unsigned short flags; // 2 bytes
}
... with 12 bytes total, requiring 4-byte alignment.
When CONFIG_DEBUG_BUGVERBOSE=n, the layout of a bug_entry is:
struct bug_entry {
signed int bug_addr_disp; // 4 bytes
unsigned short flags; // 2 bytes
< implicit padding > // 2 bytes
}
... with 8 bytes total, with 6 bytes of data and 2 bytes of trailing
padding, requiring 4-byte alginment.
When we create a bug_entry in assembly, we align the start of the entry
to 4 bytes, which implicitly handles padding for any prior entries.
However, we do not align the end of the entry, and so when
CONFIG_DEBUG_BUGVERBOSE=n, the final entry lacks the trailing padding
bytes.
For the main kernel image this is not a problem as find_bug() doesn't
depend on the trailing padding bytes when searching for entries:
for (bug = __start___bug_table; bug < __stop___bug_table; ++bug)
if (bugaddr == bug_addr(bug))
return bug;
However for modules, module_bug_finalize() depends on the trailing
bytes when calculating the number of entries:
mod->num_bugs = sechdrs[i].sh_size / sizeof(struct bug_entry);
... and as the last bug_entry lacks the necessary padding bytes, this entry
will not be counted, e.g. in the case of a single entry:
sechdrs[i].sh_size == 6
sizeof(struct bug_entry) == 8;
sechdrs[i].sh_size / sizeof(struct bug_entry) == 0;
Consequently module_find_bug() will miss the last bug_entry when it does:
for (i = 0; i < mod->num_bugs; ++i, ++bug)
if (bugaddr == bug_addr(bug))
goto out;
... which can lead to a kenrel panic due to an unhandled bug.
This can be demonstrated with the following module:
static int __init buginit(void)
{
WARN(1, "hello\n");
return 0;
}
static void __exit bugexit(void)
{
}
module_init(buginit);
module_exit(bugexit);
MODULE_LICENSE("GPL");
... which will trigger a kernel panic when loaded:
------------[ cut here ]------------
hello
Unexpected kernel BRK exception at EL1
Internal error: BRK handler: 00000000f2000800 [#1] PREEMPT SMP
Modules linked in: hello(O+)
CPU: 0 PID: 50 Comm: insmod Tainted: G O 6.9.1 #8
Hardware name: linux,dummy-virt (DT)
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : buginit+0x18/0x1000 [hello]
lr : buginit+0x18/0x1000 [hello]
sp : ffff800080533ae0
x29: ffff800080533ae0 x28: 0000000000000000 x27: 0000000000000000
x26: ffffaba8c4e70510 x25: ffff800080533c30 x24: ffffaba8c4a28a58
x23: 0000000000000000 x22: 0000000000000000 x21: ffff3947c0eab3c0
x20: ffffaba8c4e3f000 x19: ffffaba846464000 x18: 0000000000000006
x17: 0000000000000000 x16: ffffaba8c2492834 x15: 0720072007200720
x14: 0720072007200720 x13: ffffaba8c49b27c8 x12: 0000000000000312
x11: 0000000000000106 x10: ffffaba8c4a0a7c8 x9 : ffffaba8c49b27c8
x8 : 00000000ffffefff x7 : ffffaba8c4a0a7c8 x6 : 80000000fffff000
x5 : 0000000000000107 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff3947c0eab3c0
Call trace:
buginit+0x18/0x1000 [hello]
do_one_initcall+0x80/0x1c8
do_init_module+0x60/0x218
load_module+0x1ba4/0x1d70
__do_sys_init_module+0x198/0x1d0
__arm64_sys_init_module+0x1c/0x28
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xd8
el0t_64_sync_handler+0x120/0x12c
el0t_64_sync+0x190/0x194
Code: d0ffffe0 910003fd 91000000 9400000b (d4210000)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: BRK handler: Fatal exception
Fix this by always aligning the end of a bug_entry to 4 bytes, which is
correct regardless of CONFIG_DEBUG_BUGVERBOSE.
Fixes: 9fb7410f955f ("arm64/BUG: Use BRK instruction for generic BUG traps")
Signed-off-by: Yuanbin Xie <xieyuanbin1@huawei.com>
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1716212077-43826-1-git-send-email-xiaojiangfeng@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 30a92c9e3d6b073932762bef2ac66f4ee784c657 ]
Open vSwitch is originally intended to switch at layer 2, only dealing with
Ethernet frames. With the introduction of l3 tunnels support, it crossed
into the realm of needing to care a bit about some routing details when
making forwarding decisions. If an oversized packet would need to be
fragmented during this forwarding decision, there is a chance for pmtu
to get involved and generate a routing exception. This is gated by the
skbuff->pkt_type field.
When a flow is already loaded into the openvswitch module this field is
set up and transitioned properly as a packet moves from one port to
another. In the case that a packet execute is invoked after a flow is
newly installed this field is not properly initialized. This causes the
pmtud mechanism to omit sending the required exception messages across
the tunnel boundary and a second attempt needs to be made to make sure
that the routing exception is properly setup. To fix this, we set the
outgoing packet's pkt_type to PACKET_OUTGOING, since it can only get
to the openvswitch module via a port device or packet command.
Even for bridge ports as users, the pkt_type needs to be reset when
doing the transmit as the packet is truly outgoing and routing needs
to get involved post packet transformations, in the case of
VXLAN/GENEVE/udp-tunnel packets. In general, the pkt_type on output
gets ignored, since we go straight to the driver, but in the case of
tunnel ports they go through IP routing layer.
This issue is periodically encountered in complex setups, such as large
openshift deployments, where multiple sets of tunnel traversal occurs.
A way to recreate this is with the ovn-heater project that can setup
a networking environment which mimics such large deployments. We need
larger environments for this because we need to ensure that flow
misses occur. In these environment, without this patch, we can see:
./ovn_cluster.sh start
podman exec ovn-chassis-1 ip r a 170.168.0.5/32 dev eth1 mtu 1200
podman exec ovn-chassis-1 ip netns exec sw01p1 ip r flush cache
podman exec ovn-chassis-1 ip netns exec sw01p1 \
ping 21.0.0.3 -M do -s 1300 -c2
PING 21.0.0.3 (21.0.0.3) 1300(1328) bytes of data.
From 21.0.0.3 icmp_seq=2 Frag needed and DF set (mtu = 1142)
--- 21.0.0.3 ping statistics ---
...
Using tcpdump, we can also see the expected ICMP FRAG_NEEDED message is not
sent into the server.
With this patch, setting the pkt_type, we see the following:
podman exec ovn-chassis-1 ip netns exec sw01p1 \
ping 21.0.0.3 -M do -s 1300 -c2
PING 21.0.0.3 (21.0.0.3) 1300(1328) bytes of data.
From 21.0.0.3 icmp_seq=1 Frag needed and DF set (mtu = 1222)
ping: local error: message too long, mtu=1222
--- 21.0.0.3 ping statistics ---
...
In this case, the first ping request receives the FRAG_NEEDED message and
a local routing exception is created.
Tested-by: Jaime Caamano <jcaamano@redhat.com>
Reported-at: https://issues.redhat.com/browse/FDP-164
Fixes: 58264848a5a7 ("openvswitch: Add vxlan tunneling support.")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/20240516200941.16152-1-aconole@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit efb9f4f19f8e37fde43dfecebc80292d179f56c6 ]
seg6_hmac_init_algo returns without cleaning up the previous allocations
if one fails, so it's going to leak all that memory and the crypto tfms.
Update seg6_hmac_exit to only free the memory when allocated, so we can
reuse the code directly.
Fixes: bf355b8d2c30 ("ipv6: sr: add core files for SR HMAC support")
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Closes: https://lore.kernel.org/netdev/Zj3bh-gE7eT6V6aH@hog/
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/20240517005435.2600277-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4836da219781ec510c4c0303df901aa643507a7a ]
Under the scenario of IB device bonding, when bringing down one of the
ports, or all ports, we saw xprtrdma entering a non-recoverable state
where it is not even possible to complete the disconnect and shut it
down the mount, requiring a reboot. Following debug, we saw that
transport connect never ended after receiving the
RDMA_CM_EVENT_DEVICE_REMOVAL callback.
The DEVICE_REMOVAL callback is irrespective of whether the CM_ID is
connected, and ESTABLISHED may not have happened. So need to work with
each of these states accordingly.
Fixes: 2acc5cae2923 ('xprtrdma: Prevent dereferencing r_xprt->rx_ep after it is freed')
Cc: Sagi Grimberg <sagi.grimberg@vastdata.com>
Signed-off-by: Dan Aloni <dan.aloni@vastdata.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0dc9f430027b8bd9073fdafdfcdeb1a073ab5594 ]
It used to be quite awhile ago since 1b63a75180c6 ('SUNRPC: Refactor
rpc_clone_client()'), in 2012, that `cl_timeout` was copied in so that
all mount parameters propagate to NFSACL clients. However since that
change, if mount options as follows are given:
soft,timeo=50,retrans=16,vers=3
The resultant NFSACL client receives:
cl_softrtry: 1
cl_timeout: to_initval=60000, to_maxval=60000, to_increment=0, to_retries=2, to_exponential=0
These values lead to NFSACL operations not being retried under the
condition of transient network outages with soft mount. Instead, getacl
call fails after 60 seconds with EIO.
The simple fix is to pass the existing client's `cl_timeout` as the new
client timeout.
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Benjamin Coddington <bcodding@redhat.com>
Link: https://lore.kernel.org/all/20231105154857.ryakhmgaptq3hb6b@gmail.com/T/
Fixes: 1b63a75180c6 ('SUNRPC: Refactor rpc_clone_client()')
Signed-off-by: Dan Aloni <dan.aloni@vastdata.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37ffe06537af3e3ec212e7cbe941046fce0a822f ]
Dan Carpenter reports smatch warning for nfs4_try_migration() when a memory
allocation failure results in a zero return value. In this case, a
transient allocation failure error will likely be retried the next time the
server responds with NFS4ERR_MOVED.
We can fixup the smatch warning with a small refactor: attempt all three
allocations before testing and returning on a failure.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: c3ed222745d9 ("NFSv4: Fix free of uninitialized nfs4_label on referral lookup.")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7078ac4fd179a68d0bab448004fcd357e7a45f8d ]
TAS2552 is a Smartamp with I/V sense data, add TX path
to support capturing I/V data.
Fixes: 38803ce7b53b ("ASoC: codecs: tas*: merge .digital_mute() into .mute_stream()")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://msgid.link/r/20240518033515.866-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4a87abf588536d1cdfb128595e6e680af5cf3ed ]
syzbot reported the following uninit-value access issue [1]
nci_rx_work() parses received packet from ndev->rx_q. It should be
validated header size, payload size and total packet size before
processing the packet. If an invalid packet is detected, it should be
silently discarded.
Fixes: d24b03535e5e ("nfc: nci: Fix uninit-value in nci_dev_up and nci_ntf_packet")
Reported-and-tested-by: syzbot+d7b4dc6cd50410152534@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d7b4dc6cd50410152534 [1]
Signed-off-by: Ryosuke Yasuoka <ryasuoka@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5447f9708d9e4c17a647b16a9cb29e9e02820bd9 ]
The seg6_input() function is responsible for adding the SRH into a
packet, delegating the operation to the seg6_input_core(). This function
uses the skb_cow_head() to ensure that there is sufficient headroom in
the sk_buff for accommodating the link-layer header.
In the event that the skb_cow_header() function fails, the
seg6_input_core() catches the error but it does not release the sk_buff,
which will result in a memory leak.
This issue was introduced in commit af3b5158b89d ("ipv6: sr: fix BUG due
to headroom too small after SRH push") and persists even after commit
7a3f5b0de364 ("netfilter: add netfilter hooks to SRv6 data plane"),
where the entire seg6_input() code was refactored to deal with netfilter
hooks.
The proposed patch addresses the identified memory leak by requiring the
seg6_input_core() function to release the sk_buff in the event that
skb_cow_head() fails.
Fixes: af3b5158b89d ("ipv6: sr: fix BUG due to headroom too small after SRH push")
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1fa60ec252fba39130107074becd12d0b3f83ec ]
Stephen reported that he was unable to get the dsa_loop driver to get
probed, and the reason ended up being because he had CONFIG_FIXED_PHY=y
in his kernel configuration. As Masahiro explained it:
"obj-m += dsa/" means everything under dsa/ must be modular.
If there is a built-in object under dsa/ with CONFIG_NET_DSA=m,
you cannot do "obj-$(CONFIG_NET_DSA) += dsa/".
You need to change it back to "obj-y += dsa/".
This was the case here whereby CONFIG_NET_DSA=m, and so the
obj-$(CONFIG_FIXED_PHY) += dsa_loop_bdinfo.o rule is not executed and
the DSA loop mdio_board info structure is not registered with the
kernel, and eventually the device is simply not found.
To preserve the intention of the original commit of limiting the amount
of folder descending, conditionally descend into drivers/net/dsa when
CONFIG_NET_DSA is enabled.
Fixes: 227d72063fcc ("dsa: simplify Kconfig symbols and dependencies")
Reported-by: Stephen Langstaff <stephenlangstaff1@gmail.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66ee3636eddcc82ab82b539d08b85fb5ac1dff9b ]
It took me some time to understand the purpose of the tricky code at
the end of arch/x86/Kconfig.debug.
Without it, the following would be shown:
WARNING: unmet direct dependencies detected for FRAME_POINTER
because
81d387190039 ("x86/kconfig: Consolidate unwinders into multiple choice selection")
removed 'select ARCH_WANT_FRAME_POINTERS'.
The correct and more straightforward approach should have been to move
it where 'select FRAME_POINTER' is located.
Several architectures properly handle the conditional selection of
ARCH_WANT_FRAME_POINTERS. For example, 'config UNWINDER_FRAME_POINTER'
in arch/arm/Kconfig.debug.
Fixes: 81d387190039 ("x86/kconfig: Consolidate unwinders into multiple choice selection")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20240204122003.53795-1-masahiroy@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f9f7c63c415e287cd57b5c98be61eb320dedcfc ]
Some of the regulators on the BD71828 have common voltage setting for
RUN/SUSPEND/IDLE/LPSR states. The enable control can be set for each
state though.
The driver allows setting the voltage values for these states via
device-tree. As a side effect, setting the voltages for
SUSPEND/IDLE/LPSR will also change the RUN level voltage which is not
desired and can break the system.
The comment in code reflects this behaviour, but it is likely to not
make people any happier. The right thing to do is to allow setting the
enable/disable state at SUSPEND/IDLE/LPSR via device-tree, but to
disallow setting state specific voltages for those regulators.
BUCK1 is a bit different. It only shares the SUSPEND and LPSR state
voltages. The former behaviour of allowing to silently overwrite the
SUSPEND state voltage by LPSR state voltage is also changed here so that
the SUSPEND voltage is prioritized over LPSR voltage.
Prevent setting PMIC state specific voltages for regulators which do not
support it.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes: 522498f8cb8c ("regulator: bd71828: Basic support for ROHM bd71828 PMIC regulators")
Link: https://msgid.link/r/e1883ae1e3ae5668f1030455d4750923561f3d68.1715848512.git.mazziesaccount@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a85ed162f0efcfdd664954414a05d1d560cc95dc ]
For DSP_A, data is a BCK cycle behind LRCK trigger edge. For DSP_B, this
delay doesn't exist. Fix the delay configuration to match the standard.
Fixes: 52fcd65414abfc ("ASoC: mediatek: mt8192: support tdm in platform driver")
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20240509-8192-tdm-v1-1-530b54645763@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbe499977bc36fedae89f0a0d7deb4ccde9798fe ]
If, when waiting for a transmit to finish, the wait is interrupted,
then you might get a "transmit timed out" message, even though the
transmit was interrupted and did not actually time out.
Set transmit_in_progress_aborted to true if the
wait_for_completion_killable() call was interrupted and ensure
that the transmit is properly marked as ABORTED.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Yang, Chenyuan <cy54@illinois.edu>
Closes: https://lore.kernel.org/linux-media/PH7PR11MB57688E64ADE4FE82E658D86DA09EA@PH7PR11MB5768.namprd11.prod.outlook.com/
Fixes: 590a8e564c6e ("media: cec: abort if the current transmit was canceled")
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47c82aac10a6954d68f29f10d9758d016e8e5af1 ]
Keep track if cec_claim_log_addrs() is running, and return -EBUSY
if it is when calling CEC_ADAP_S_LOG_ADDRS.
This prevents a case where cec_claim_log_addrs() could be called
while it was still in progress.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Yang, Chenyuan <cy54@illinois.edu>
Closes: https://lore.kernel.org/linux-media/PH7PR11MB57688E64ADE4FE82E658D86DA09EA@PH7PR11MB5768.namprd11.prod.outlook.com/
Fixes: ca684386e6e2 ("[media] cec: add HDMI CEC framework (api)")
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9222f8ca18bcb1d55dd749b493b29fd8092fb82 ]
Using an activation counter to decide when the enable or disable the
cec adapter is not the best approach and can lead to race conditions.
Change this to determining the current status of the adapter, and
enable or disable the adapter accordingly.
It now only needs to be called whenever there is a chance that the
state changes, and it can handle enabling/disabling monitoring as
well if needed.
This simplifies the code and it should be a more robust approach as well.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Stable-dep-of: 47c82aac10a6 ("media: cec: core: avoid recursive cec_claim_log_addrs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2ed5024ac2bc27d4bfc99fd58f5ab54de8fa965 ]
Use call_(void_)op consistently in the CEC core framework. Ditto
for the cec pin ops. And check if !adap->devnode.unregistered before
calling each op. This avoids calls to ops when the device has been
unregistered and the underlying hardware may be gone.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Stable-dep-of: 47c82aac10a6 ("media: cec: core: avoid recursive cec_claim_log_addrs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9d0ecbf56f4b90745a6adc5b59281ad8f70ab54 ]
The results of non-blocking transmits were not correctly communicated
to userspace.
Specifically:
1) if a non-blocking transmit was canceled, then rx_status wasn't set to 0
as it should.
2) if the non-blocking transmit succeeded, but the corresponding reply
never arrived (aborted or timed out), then tx_status wasn't set to 0
as it should, and rx_status was hardcoded to ABORTED instead of the
actual reason, such as TIMEOUT. In addition, adap->ops->received() was
never called, so drivers that want to do message processing themselves
would not be informed of the failed reply.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Stable-dep-of: 47c82aac10a6 ("media: cec: core: avoid recursive cec_claim_log_addrs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 590a8e564c6eff7e77a84e728612f1269e3c0685 ]
If a transmit-in-progress was canceled, then, once the transmit
is done, mark it as aborted and refrain from retrying the transmit.
To signal this situation the new transmit_in_progress_aborted field is
set to true.
The old implementation would just set adap->transmitting to NULL and
set adap->transmit_in_progress to false, but on the hardware level
the transmit was still ongoing. However, the framework would think
the transmit was aborted, and if a new transmit was issued, then
it could overwrite the HW buffer containing the old transmit with the
new transmit, leading to garbled data on the CEC bus.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Stable-dep-of: 47c82aac10a6 ("media: cec: core: avoid recursive cec_claim_log_addrs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3813c932ed970dd4f413498ccecb03c73c4f1784 ]
Don't enable/disable the adapter if the first fh is opened or the
last fh is closed, instead do this when the adapter is configured
or unconfigured, and also when we enter Monitor All or Monitor Pin
mode for the first time or we exit the Monitor All/Pin mode for the
last time.
However, if needs_hpd is true, then do this when the physical
address is set or cleared: in that case the adapter typically is
powered by the HPD, so it really is disabled when the HPD is low.
This case (needs_hpd is true) was already handled in this way, so
this wasn't changed.
The problem with the old behavior was that if the HPD goes low when
no fh is open, and a transmit was in progress, then the adapter would
be disabled, typically stopping the transmit immediately which
leaves a partial message on the bus, which isn't nice and can confuse
some adapters.
It makes much more sense to disable it only when the adapter is
unconfigured and we're not monitoring the bus, since then you really
won't be using it anymore.
To keep track of this store a CEC activation count and call adap_enable
only when it goes from 0 to 1 or back to 0.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Stable-dep-of: 47c82aac10a6 ("media: cec: core: avoid recursive cec_claim_log_addrs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42bcaacae924bf18ae387c3f78c202df0b739292 ]
When cec_release() uses fh->msgs it has to take fh->lock,
otherwise the list can get corrupted.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Yang, Chenyuan <cy54@illinois.edu>
Closes: https://lore.kernel.org/linux-media/PH7PR11MB57688E64ADE4FE82E658D86DA09EA@PH7PR11MB5768.namprd11.prod.outlook.com/
Fixes: ca684386e6e2 ("[media] cec: add HDMI CEC framework (api)")
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2cbade17b18c0f0fd9963f26c9fc9b057eb1cb3a ]
The __switch_mm function is defined in the user code, and is called
by the kernel code. It should be declared in a shared header.
Fixes: 4dc706c2f292 ("um: take um_mmu.h to asm/mmu.h, clean asm/mmu_context.h a bit")
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d4341638516bf97b9a34947e0bd95035a8230a5 ]
Couple of Minor fixes:
- hcall return values are long. Fix that for h_get_mpp, h_get_ppp and
parse_ppp_data
- If hcall fails, values set should be at-least zero. It shouldn't be
uninitialized values. Fix that for h_get_mpp and h_get_ppp
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240412092047.455483-3-sshegde@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f62dc8f6bf82d1b307fc37d8d22cc79f67856c2f ]
Commit d725d20e81c2 ("media: flexcop-usb: sanity checking of endpoint type
") adds a sanity check for endpoint[1], but fails to modify the sanity
check of bNumEndpoints.
Fix this by modifying the sanity check of bNumEndpoints to 2.
Link: https://lore.kernel.org/linux-media/20220602055027.849014-1-dzm91@hust.edu.cn
Fixes: d725d20e81c2 ("media: flexcop-usb: sanity checking of endpoint type")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3de50478b5cc2e0c2479a5f2b967f331f7597d23 ]
Add a temporary variable to make the endpoint sanity checks a bit more
readable.
While at it, fix a typo in the usb_set_interface() comment.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20220822151456.27178-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: f62dc8f6bf82 ("media: flexcop-usb: fix sanity check of bNumEndpoints")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b4e0b39182cf5e677c1fc092a3ec40e621c25b6 ]
Grab input->mutex during suspend/resume functions like it is done in
other input drivers. This fixes the following warning during system
suspend/resume cycle on Samsung Exynos5250-based Snow Chromebook:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 1680 at drivers/input/input.c:2291 input_device_enabled+0x68/0x6c
Modules linked in: ...
CPU: 1 PID: 1680 Comm: kworker/u4:12 Tainted: G W 6.6.0-rc5-next-20231009 #14109
Hardware name: Samsung Exynos (Flattened Device Tree)
Workqueue: events_unbound async_run_entry_fn
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x58/0x70
dump_stack_lvl from __warn+0x1a8/0x1cc
__warn from warn_slowpath_fmt+0x18c/0x1b4
warn_slowpath_fmt from input_device_enabled+0x68/0x6c
input_device_enabled from cyapa_gen3_set_power_mode+0x13c/0x1dc
cyapa_gen3_set_power_mode from cyapa_reinitialize+0x10c/0x15c
cyapa_reinitialize from cyapa_resume+0x48/0x98
cyapa_resume from dpm_run_callback+0x90/0x298
dpm_run_callback from device_resume+0xb4/0x258
device_resume from async_resume+0x20/0x64
async_resume from async_run_entry_fn+0x40/0x15c
async_run_entry_fn from process_scheduled_works+0xbc/0x6a8
process_scheduled_works from worker_thread+0x188/0x454
worker_thread from kthread+0x108/0x140
kthread from ret_from_fork+0x14/0x28
Exception stack(0xf1625fb0 to 0xf1625ff8)
...
---[ end trace 0000000000000000 ]---
...
------------[ cut here ]------------
WARNING: CPU: 1 PID: 1680 at drivers/input/input.c:2291 input_device_enabled+0x68/0x6c
Modules linked in: ...
CPU: 1 PID: 1680 Comm: kworker/u4:12 Tainted: G W 6.6.0-rc5-next-20231009 #14109
Hardware name: Samsung Exynos (Flattened Device Tree)
Workqueue: events_unbound async_run_entry_fn
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x58/0x70
dump_stack_lvl from __warn+0x1a8/0x1cc
__warn from warn_slowpath_fmt+0x18c/0x1b4
warn_slowpath_fmt from input_device_enabled+0x68/0x6c
input_device_enabled from cyapa_gen3_set_power_mode+0x13c/0x1dc
cyapa_gen3_set_power_mode from cyapa_reinitialize+0x10c/0x15c
cyapa_reinitialize from cyapa_resume+0x48/0x98
cyapa_resume from dpm_run_callback+0x90/0x298
dpm_run_callback from device_resume+0xb4/0x258
device_resume from async_resume+0x20/0x64
async_resume from async_run_entry_fn+0x40/0x15c
async_run_entry_fn from process_scheduled_works+0xbc/0x6a8
process_scheduled_works from worker_thread+0x188/0x454
worker_thread from kthread+0x108/0x140
kthread from ret_from_fork+0x14/0x28
Exception stack(0xf1625fb0 to 0xf1625ff8)
...
---[ end trace 0000000000000000 ]---
Fixes: d69f0a43c677 ("Input: use input_device_enabled()")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Link: https://lore.kernel.org/r/20231009121018.1075318-1-m.szyprowski@samsung.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37f1663c91934f664fb850306708094a324c227c ]
strlcpy() reads the entire source buffer first. This read may exceed the
destination size limit. This is both inefficient and can lead to linear
read overflows if a source string is not NUL-terminated [1]. In an effort
to remove strlcpy() completely [2], replace strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Link: https://lore.kernel.org/r/20230516025404.2843867-1-azeemshaikh38@gmail.com
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: c3408c4ae041 ("scsi: qla2xxx: Avoid possible run-time warning with long model_num")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit faa4364bef2ec0060de381ff028d1d836600a381 ]
The subtract in this condition is reversed. The ->length is the length
of the buffer. The ->bytesused is how many bytes we have copied thus
far. When the condition is reversed that means the result of the
subtraction is always negative but since it's unsigned then the result
is a very high positive value. That means the overflow check is never
true.
Additionally, the ->bytesused doesn't actually work for this purpose
because we're not writing to "buf->mem + buf->bytesused". Instead, the
math to calculate the destination where we are writing is a bit
involved. You calculate the number of full lines already written,
multiply by two, skip a line if necessary so that we start on an odd
numbered line, and add the offset into the line.
To fix this buffer overflow, just take the actual destination where we
are writing, if the offset is already out of bounds print an error and
return. Otherwise, write up to buf->length bytes.
Fixes: 9cb2173e6ea8 ("[media] media: Add stk1160 new driver (easycap replacement)")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 30ea09a182cb37c4921b9d477ed18107befe6d78 ]
The bridge always uses 24bpp internally. Therefore, for jeida-18
mapping we need to discard the lowest two bits for each channel and thus
starting with LV_[RGB]2. jeida-24 has the same mapping but uses four
lanes instead of three, with the forth pair transmitting the lowest two
bits of each channel. Thus, the mapping between jeida-18 and jeida-24
is actually the same, except that one channel is turned off (by
selecting the RGB666 format in VPCTRL).
While at it, remove the bogus comment about the hardware default because
the default is overwritten in any case.
Tested with a jeida-18 display (Evervision VGG644804).
Fixes: b26975593b17 ("display/drm/bridge: TC358775 DSI/LVDS driver")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240225062008.33191-5-tony@atomide.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 584ed2f76ff5fe360d87a04d17b6520c7999e06b ]
With W=1 the build complains about a pointer compared to
zero, clearly the result should've been compared.
Fixes: 9807019a62dc ("um: Loadable BPF "Firmware" for vector drivers")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0fbbd36c156b9f7b2276871d499c9943dfe5101 ]
Registering a winch IRQ is racy, an interrupt may occur before the winch is
added to the winch_handlers list.
If that happens, register_winch_irq() adds to that list a winch that is
scheduled to be (or has already been) freed, causing a panic later in
winch_cleanup().
Avoid the race by adding the winch to the winch_handlers list before
registering the IRQ, and rolling back if um_request_irq() fails.
Fixes: 42a359e31a0e ("uml: SIGIO support cleanup")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31a5990ed253a66712d7ddc29c92d297a991fdf2 ]
When kmalloc_array() fails to allocate memory, the ubd_init()
should return -ENOMEM instead of -1. So, fix it.
Fixes: f88f0bdfc32f ("um: UBD Improvements")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f12e0e12524a34bf145f7b80122e653ffe3d130a ]
When dual-DSI (bonded DSI) was added in commit ed9976a09b48
("drm/msm/dsi: adjust dsi timing for dual dsi mode") some DBG() prints
were not updated, leading to print the original mode->clock rather
than the adjusted (typically the mode clock divided by two, though more
recently also adjusted for DSC compression) msm_host->pixel_clk_rate
which is passed to clk_set_rate() just below. Fix that by printing the
actual pixel_clk_rate that is being set.
Fixes: ed9976a09b48 ("drm/msm/dsi: adjust dsi timing for dual dsi mode")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/589896/
Link: https://lore.kernel.org/r/20240417-drm-msm-initial-dualpipe-dsc-fixes-v1-1-78ae3ee9a697@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 48c0687a322d54ac7e7a685c0b6db78d78f593af ]
The output voltage is inclusive hence the max level calculation is
off-by-one-step. Correct it.
iWhile we are at it also add a define for the step size instead of
using the magic value.
Fixes: 11205bb63e5c ("Input: add support for pm8xxx based vibrator driver")
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240412-pm8xxx-vibrator-new-design-v10-1-0ec0ad133866@quicinc.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3182932bb070e7518411fd165e023f82afd7d25 ]
While STRB is currently used for DATA and CRC responses, the CMD
responses from the device to the host still require ITAPDLY for
HS400 timing.
Currently what is stored for HS400 is the ITAPDLY from High Speed
mode which is incorrect. The ITAPDLY for HS400 speed mode should
be the same as ITAPDLY as HS200 timing after tuning is executed.
Add the functionality to save ITAPDLY from HS200 tuning and save
as HS400 ITAPDLY.
Fixes: a161c45f2979 ("mmc: sdhci_am654: Enable DLL only for some speed modes")
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240320223837.959900-8-jm@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9dff65bb5e09903c27d9cff947dff4d22b6ea6a1 ]
Add ITAPDLYSEL to sdhci_j721e_4bit_set_clock function.
This allows to set the correct ITAPDLY for timings that
do not carry out tuning.
Fixes: 1accbced1c32 ("mmc: sdhci_am654: Add Support for 4 bit IP on J721E")
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240320223837.959900-7-jm@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 387c1bf7dce0dfea02080c8bdb066b5209e92155 ]
Currently the OTAP/ITAP delay enable functionality is incorrect in
the am654_set_clock function. The OTAP delay is not enabled when
timing < SDR25 bus speed mode. The ITAP delay is not enabled for
timings that do not carry out tuning.
Add this OTAP/ITAP delay functionality according to the datasheet
[1] OTAPDLYENA and ITAPDLYENA for MMC0.
[1] https://www.ti.com/lit/ds/symlink/am62p.pdf
Fixes: 8ee5fc0e0b3b ("mmc: sdhci_am654: Update OTAPDLY writes")
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240320223837.959900-4-jm@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5cb2f9286a31f33dc732c57540838ad9339393ab ]
ti,otap-del-sel has been deprecated since v5.7 and there are no users of
this property and no documentation in the DT bindings either.
Drop the fallback code looking for this property, this makes
sdhci_am654_get_otap_delay() much easier to read as all the TAP values
can be handled via a single iterator loop.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20231122060215.2074799-1-vigneshr@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Stable-dep-of: 387c1bf7dce0 ("mmc: sdhci_am654: Add OTAP/ITAP delay enable")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d465234493bb6ad1b9c10a0c9ef9881b8d85081a ]
For DDR52 timing, DLL is enabled but tuning is not carried
out, therefore the ITAPDLY value in PHY CTRL 4 register is
not correct. Fix this by writing ITAPDLY after enabling DLL.
Fixes: a161c45f2979 ("mmc: sdhci_am654: Enable DLL only for some speed modes")
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240320223837.959900-3-jm@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
