IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
After a somewhat quiet 5.17 release, the size of the DT changes
is a bit larger again. There are nine new SoC that get added,
all of them related to existing platforms:
- Airoha (formerly Mediatek/EcoNet) EN7523 networking SoC and EVB
- Mediatek mt6582 tablet platform with the Prestigio PMT5008 3G tablet
- Microchip Lan966 networking SoC and it evaluation board
- Qualcomm Snapdragon 625/632 midrange phone SoCs, with the
LG Nexus 5X and Fairphone FP3 phones
- Renesas RZ/G2LC and RZ/V2L general-purpose embedded SoCs,
along with their evaluation boards
- Samsung Exynos 850 phone SoC and reference board
- Samsung Exynos7885 with the Samsung Galaxy A8 (2018) phone
- Tesla FSD (Fully Self-Driving), an automotive SoC losely derived
from the Samsung Exynos family.
- TI K3/AM62 SoC and reference board
Support for additional functionality in existing dts files is added all
over the place: Samsung, Renesas, Mstar, wpcm450, OMAP, AT91, Allwinner,
i.MX, Tegra, Aspeed, Oxnas, Qualcomm, Mediatek, and Broadcom.
Samsung has a rework for its pinctrl schema that is a bit tricky and
requires driver changes to be included here.
A few more platforms only have smaller cleanups and DT Schema fixes,
this includes SoCFPGA, ux500, ixp4xx, STi, Xilinx Zynq, LG, and Juno.
The new machines are really too many to list, but I'll do it anyway:
Allwinner:
- A20-Marsboard development board
Amlogic
- Amediatek X96-AIR (Amlogic S905X3)
- CYX A95XF3-AIR (Amlogic S905X3)
- Haochuangy H96-Max (Amlogic S905X3)
- Amlogic AQ222 (Amlogic S4)
- OSMC Vero 4K+ (Amlogic S905D)
Arm Juno
- Separate DT depending on SCMI firmware version
Aspeed:
- Quanta S6Q BMC (AST2600)
- ASRock ROMED8HM3 (AST2500)
Broadcom:
- Raspberry Pi Zero 2 W
Marvell MVEBU/Armada:
- Ctera C200 V1 NAS (kirkwood)
- Ctera C200 V2 NAS (armada-370)
Mstar
- DongShanPiOne, a low-end embedded board
- Miyoo Mini handheld game console
NXP i.MX:
- Numerous i.MX8M Mini based boards in even more variations, but
none based on other SoCs this time:
Protonic PRT8MM, emCON-MX8M Mini, Toradex Verdin, and
Gateworks GW7903
Qualcomm:
- Google Herobrine R1 Chromebook platform (Snapdragon 7c Gen 3)
- SHIFT6mq phone (Snapdragon 845)
- Samsung Galaxy Book2 (Snapdragon 850)
- Snapdragon 8 Gen 1 Hardware Development Kit
TI OMAP:
- SanCloud BeagleBone Enhanced WiFi
Rockchip:
- Pine64 PineNote ereader tablet (rk356x)
- Bananapi-R2-Pro (rk356x)
STM32:
- emtrion emSBS-Argon embedded board (stm32mp157c)
-----BEGIN PGP SIGNATURE-----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=v98T
-----END PGP SIGNATURE-----
Merge tag 'arm-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM devicetree updates from Arnd Bergmann:
"After a somewhat quiet 5.17 release, the size of the DT changes is a
bit larger again. There are nine new SoC that get added, all of them
related to existing platforms:
- Airoha (formerly Mediatek/EcoNet) EN7523 networking SoC and EVB
- Mediatek mt6582 tablet platform with the Prestigio PMT5008 3G
tablet
- Microchip Lan966 networking SoC and it evaluation board
- Qualcomm Snapdragon 625/632 midrange phone SoCs, with the LG Nexus
5X and Fairphone FP3 phones
- Renesas RZ/G2LC and RZ/V2L general-purpose embedded SoCs, along
with their evaluation boards
- Samsung Exynos 850 phone SoC and reference board
- Samsung Exynos7885 with the Samsung Galaxy A8 (2018) phone
- Tesla FSD (Fully Self-Driving), an automotive SoC loosely derived
from the Samsung Exynos family.
- TI K3/AM62 SoC and reference board
Support for additional functionality in existing dts files is added
all over the place: Samsung, Renesas, Mstar, wpcm450, OMAP, AT91,
Allwinner, i.MX, Tegra, Aspeed, Oxnas, Qualcomm, Mediatek, and
Broadcom.
Samsung has a rework for its pinctrl schema that is a bit tricky and
requires driver changes to be included here.
A few more platforms only have smaller cleanups and DT Schema fixes,
this includes SoCFPGA, ux500, ixp4xx, STi, Xilinx Zynq, LG, and Juno.
The new machines are really too many to list, but I'll do it anyway:
Allwinner:
- A20-Marsboard development board
Amlogic:
- Amediatek X96-AIR (Amlogic S905X3)
- CYX A95XF3-AIR (Amlogic S905X3)
- Haochuangy H96-Max (Amlogic S905X3)
- Amlogic AQ222 (Amlogic S4)
- OSMC Vero 4K+ (Amlogic S905D)
Arm Juno:
- Separate DT depending on SCMI firmware version
Aspeed:
- Quanta S6Q BMC (AST2600)
- ASRock ROMED8HM3 (AST2500)
Broadcom:
- Raspberry Pi Zero 2 W
Marvell MVEBU/Armada:
- Ctera C200 V1 NAS (kirkwood)
- Ctera C200 V2 NAS (armada-370)
Mstar:
- DongShanPiOne, a low-end embedded board
- Miyoo Mini handheld game console
NXP i.MX:
- Numerous i.MX8M Mini based boards in even more variations, but
none based on other SoCs this time:
Protonic PRT8MM, emCON-MX8M Mini, Toradex Verdin, and
Gateworks GW7903
Qualcomm:
- Google Herobrine R1 Chromebook platform (Snapdragon 7c Gen 3)
- SHIFT6mq phone (Snapdragon 845)
- Samsung Galaxy Book2 (Snapdragon 850)
- Snapdragon 8 Gen 1 Hardware Development Kit
TI OMAP:
- SanCloud BeagleBone Enhanced WiFi
Rockchip:
- Pine64 PineNote ereader tablet (rk356x)
- Bananapi-R2-Pro (rk356x)
STM32:
- emtrion emSBS-Argon embedded board (stm32mp157c)"
* tag 'arm-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (627 commits)
arm64: dts: n5x: drop invalid property and fix edac node name
arm64: dts: fsd: Add the MCT support
arm64: dts: stingray: Fix spi clock name
arm64: dts: ns2: Fix spi clock name
ARM: dts: rockchip: Update regulator name for PX3
ARM: dts: rockchip: Add #clock-cells value for rk805
arm64: dts: rockchip: Add #clock-cells value for rk805
arm64: dts: rockchip: Remove vcc13 and vcc14 for rk808
arm64: dts: rockchip: Fix SDIO regulator supply properties on rk3399-firefly
ARM: dts: at91: sama7g5: Add NAND support
ARM: dts: at91: sama7g5: add eic node
ARM: dts: at91: sama7g5: Remove unused properties in i2c nodes
ARM: dts: at91: sam9x60ek: modify vdd_1v5 regulator to vdd_1v15
arm64: dts: lg: align pl330 node name with dtschema
arm64: dts: lg: add dma-cells to pl330 node
arm64: dts: juno: align pl330 node name with dtschema
arm64: dts: broadcom: Fix sata nodename
arm64: dts: n5x: add sdr edac support
arm64: dts: agilex/stratix10: add clock-names to USB DWC2 node
dt-bindings: usb: dwc2: add disable-over-current
...
The Qualcomm SC8280XP platform contains a single block of registers
for the TLMM block. This provides pinconf and pinmux for 228 GPIOs, 2
UFS_RESET pins and one SDC interface.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220308221132.1423218-1-bjorn.andersson@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Extend driving support for I2C pins on SoC mt8195.
This property is already documented in mediatek,mt8183-pinctrl.yaml.
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220216113131.13145-3-tinghan.shen@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This binding is heavily based on the one for NPCM7xx, because the
hardware is similar. There are some notable differences, however:
- The addresses of GPIO banks are not physical addresses but simple
indices (0 to 7), because the GPIO registers are not laid out in
convenient blocks.
- Pinmux settings can explicitly specify that the GPIO mode is used.
Certain pins support blink patterns in hardware. This is currently not
modelled in the DT binding.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220129115228.2257310-5-j.neuschaefer@gmx.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The recent addition pinctrl.yaml in commit c09acbc499e8 ("dt-bindings:
pinctrl: use pinctrl.yaml") resulted in some node name warnings:
Documentation/devicetree/bindings/mfd/cirrus,lochnagar.example.dt.yaml: \
lochnagar-pinctrl: $nodename:0: 'lochnagar-pinctrl' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$'
Documentation/devicetree/bindings/mfd/cirrus,madera.example.dt.yaml: \
codec@1a: $nodename:0: 'codec@1a' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$'
Documentation/devicetree/bindings/mfd/brcm,cru.example.dt.yaml: \
pin-controller@1c0: $nodename:0: 'pin-controller@1c0' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$'
Fix the node names to the preferred 'pinctrl'. For cirrus,madera,
nothing from pinctrl.yaml schema is used, so just drop the reference.
Fixes: c09acbc499e8 ("dt-bindings: pinctrl: use pinctrl.yaml")
Cc: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220303232350.2591143-1-robh@kernel.org
- Share more pin group data, to reduce kernel size and ease review,
- Improve the pin control table validator,
- Add support for the new R-Car S4-8 SoC,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYhjYAwAKCRCKwlD9ZEnx
cM/kAP4p5s7qKyszT5A15RMzQJ6SWYwoP9td0PLZoLSw2iM05QD/d8+xy8jJR+0u
V0He7VSYWFaktJNycNiD5AeZzDVVxQs=
=PEc0
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v5.18-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v5.18 (take two)
- Share more pin group data, to reduce kernel size and ease review,
- Improve the pin control table validator,
- Add support for the new R-Car S4-8 SoC,
- Miscellaneous fixes and improvements.
1. Fix OF reference leak in pinctrl driver probe error path.
2. Correct list of handlers for Exynos850 ALIVE and CMGP pin banks.
3. Accept devicetrees with GPIO pin bank definitions named with a
"-gpio-bank" suffix. This is necessary for later Samsung pinctrl
bindings dtschema.
4. Convert Samsung pinctrl bindings to dtschema.
5. Add support for Exynos850 and ExynosAutov9 wake-up interrupts.
6. Add support for Tesla FSD SoC.
-----BEGIN PGP SIGNATURE-----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=E3xH
-----END PGP SIGNATURE-----
Merge tag 'samsung-pinctrl-5.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel
Samsung pinctrl drivers changes for v5.18
1. Fix OF reference leak in pinctrl driver probe error path.
2. Correct list of handlers for Exynos850 ALIVE and CMGP pin banks.
3. Accept devicetrees with GPIO pin bank definitions named with a
"-gpio-bank" suffix. This is necessary for later Samsung pinctrl
bindings dtschema.
4. Convert Samsung pinctrl bindings to dtschema.
5. Add support for Exynos850 and ExynosAutov9 wake-up interrupts.
6. Add support for Tesla FSD SoC.
- Add MOST (MediaLB I/F) pins on R-Car E3 and D3,
- Add support for the new RZ/V2L SoC,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYgZogQAKCRCKwlD9ZEnx
cEIUAP0SJLpUi0MnB1EsgDVpbhAPJYnP2EOPj3EKx7EQDiXt2QD+MsDwdGLgtFWf
x7ITMQuKi6C7KYP1Dc0cCkra09tDBQM=
=nYwk
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v5.18-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v5.18
- Add MOST (MediaLB I/F) pins on R-Car E3 and D3,
- Add support for the new RZ/V2L SoC,
- Miscellaneous fixes and improvements.
There is a spelling mistake in the documentation. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220202091551.580372-1-colin.i.king@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When the constraints and description for bias-pull-{up,down} were added,
the constraints were not indented correctly, resulting in them being
parsed as part of the description. This effectively nullified their
purpose.
Move the constraints out of the description block, make each description
part of the same associative array as the enum its describing, and
reindent them correctly so they take effect.
Also add "type: boolean" to the list of valid values. This corresponds
to having bias-pull-{up,down} without any arguments.
Fixes: 91e7edceda96 ("dt-bindings: pinctrl: mt8195: change pull up/down description")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220202153528.707185-1-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The blamed commit adds support for irq, but the reqisters for irq are
outside of the memory size. They are at address 0x108. Therefore update
the memory size to cover all the registers used by the device.
Fixes: 01a9350bdd49fb ("dt-bindings: pinctrl: pinctrl-microchip-sgpio: Add irq support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20220204153535.465827-2-horatiu.vultur@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Allow the gpio-reserved-ranges property to be used in dts.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220112194118.178026-9-luca@z3ntu.xyz
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The 'phandle-array' type is a bit ambiguous. It can be either just an
array of phandles or an array of phandles plus args. Many schemas for
phandle-array properties aren't clear in the schema which case applies
though the description usually describes it.
The array of phandles case boils down to needing:
items:
maxItems: 1
The phandle plus args cases should typically take this form:
items:
- items:
- description: A phandle
- description: 1st arg cell
- description: 2nd arg cell
With this change, some examples need updating so that the bracketing of
property values matches the schema.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20220119015038.2433585-1-robh@kernel.org
Add compatible for Tesla Full Self-Driving SoC. The
pinctrl hardware IP is similar to what found on most of the
Exynos series of SoC, so this new compatible is added in
Samsung pinctrl binding.
Cc: linux-fsd@tesla.com
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20220124141644.71052-12-alim.akhtar@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
It's hardware block that is part of every SoC from BCM4908 family.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220124102243.14912-1-zajec5@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Document Renesas RZ/V2L pinctrl bindings. The RZ/V2L SoC is package-
and pin-compatible with RZ/G2L. No driver changes are required as the
RZ/G2L compatible string "renesas,r9a07g044-pinctrl" will be used as a
fallback.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220110134659.30424-7-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add description for "power-source" property mentioning the values in
enum are in millivolt.
Suggested-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211222145901.23661-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
If the drive-strength isn't specified in the device tree then it
doesn't actually default to 2. Instead, it defaults to whatever the
heck the BIOS left it at. If the BIOS doesn't touch it then that means
it's whatever the heck the initial state of the pin was when the SoC
booted.
Reported-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220111140519.1.Ie2662d6289af1e9758b14b37149703c846d5f509@changeid
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Older Samsung Exynos SoCs (Exynos3250, Exynos4, Exynos5, Exynos5433)
expected pin controller node with external wake-up interrupts to have
one interrupt for multiplexing these wake-up interrupts. Also they
expected to have exactly one such pin controller (capable of external
wake-up interrupts).
It seems however that newer ARMv8 Exynos SoCs like Exynos850 and
ExynosAutov9 have differences of their pin controllers capable of
external wake-up interrupts:
1. No multiplexed external wake-up interrupt, only direct,
2. More than one pin controller capable of external wake-up interrupts.
Add dedicated Exynos850 and ExynosAutov9 compatibles.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220111201722.327219-19-krzysztof.kozlowski@canonical.com
Convert the Samsung SoC (S3C24xx, S3C64xx, S5Pv210, Exynos) pin
controller bindings to DT schema format. Parts of description and DTS
example was copied from existing sources, so keep the license as
GPL-2.0-only.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220111201722.327219-18-krzysztof.kozlowski@canonical.com
- Fix a regression when probing a child device reusing the parent
device's DT node pointer
- Refactor of_parse_phandle*() variants to static inlines
- Drop Enric Balletbo i Serra as a maintainer
- Fix DT schemas with arrays incorrectly encoded as a matrix
- Drop unneeded pinctrl properties from schemas
- Add SPI peripheral schema to SPI based displays
- Clean-up several schema examples
- Clean-up trivial-devices.yaml comments
- Add missing, in use vendor prefixes: Wingtech, Thundercomm, Huawei,
F(x)tec, 8devices
-----BEGIN PGP SIGNATURE-----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=ZOqM
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes and cleanups from Rob Herring:
- Fix a regression when probing a child device reusing the parent
device's DT node pointer
- Refactor of_parse_phandle*() variants to static inlines
- Drop Enric Balletbo i Serra as a maintainer
- Fix DT schemas with arrays incorrectly encoded as a matrix
- Drop unneeded pinctrl properties from schemas
- Add SPI peripheral schema to SPI based displays
- Clean-up several schema examples
- Clean-up trivial-devices.yaml comments
- Add missing, in use vendor prefixes: Wingtech, Thundercomm, Huawei,
F(x)tec, 8devices
* tag 'devicetree-fixes-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: google,cros-ec: drop Enric Balletbo i Serra from maintainers
dt-bindings: display: bridge: drop Enric Balletbo i Serra from maintainers
of: Check 'of_node_reused' flag on of_match_device()
of: property: define of_property_read_u{8,16,32,64}_array() unconditionally
of: base: make small of_parse_phandle() variants static inline
dt-bindings: mfd: cirrus,madera: Fix 'interrupts' in example
dt-bindings: Fix array schemas encoded as matrices
dt-bindings: Drop unnecessary pinctrl properties
dt-bindings: rtc: st,stm32-rtc: Make each example a separate entry
dt-bindings: mmc: arm,pl18x: Make each example a separate entry
dt-bindings: display: Add SPI peripheral schema to SPI based displays
scripts/dtc: dtx_diff: remove broken example from help text
dt-bindings: trivial-devices: fix double spaces in comments
dt-bindings: trivial-devices: fix swapped comments
dt-bindings: vendor-prefixes: add Wingtech
dt-bindings: vendor-prefixes: add Thundercomm
dt-bindings: vendor-prefixes: add Huawei
dt-bindings: vendor-prefixes: add F(x)tec
dt-bindings: vendor-prefixes: add 8devices
dt-bindings: power: reset: gpio-restart: Correct default priority
For a single pinctrl mode, it is not necessary to define pinctrl
properties as the tools always allow pinctrl properties.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220119015325.2438277-1-robh@kernel.org
Core changes:
- New standard enumerator and corresponding device tree bindings
for output impedance pin configuration. (Implemented and used
in the Renesas rzg2l driver.)
- Cleanup of Kconfig and Makefile to be somewhat orderly and
alphabetic.
New drivers:
- Samsung Exynos 7885 pin controller.
- Ocelot LAN966x pin controller.
- Qualcomm SDX65 pin controller.
- Qualcomm SM8450 pin controller.
- Qualcomm PM8019, PM8226 and PM2250 pin controllers.
- NXP/Freescale i.MXRT1050 pin controller.
- Intel Thunder Bay pin controller.
Enhancements:
- Introduction of the string library helper function
"kasprintf_strarray()" and subsequent use in Rockchip, ST and
Armada pin control drivers, as well as the GPIO mockup driver.
- The Ocelot pin controller has been extensively rewritten to
use regmap and other modern kernel infrastructure.
- The Microchip SGPIO driver has been converted to use regmap.
- The SPEAr driver had been converted to use regmap.
- Substantial cleanups and janitorial on the Apple pin control
driver that was merged for v5.16.
- Janitorial to remove of_node assignments in the GPIO portions
that anyway get this handled in the GPIO core.
- Minor cleanups and improvements in several pin controllers.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmHetMgACgkQQRCzN7AZ
XXOXUA/+I8nEdBy8oBa+vYsJp/FwQi9oh2r488Bin7kCEwYJjPKDDjZuIQQQz34H
DcSpzBBB/sSFiO27F27rk70vHGfZ4pVi57XfRI2IB1qSe4uCNCNEURVDSM9aY7Nl
hR973GS5VDvmyo/7zUT7dWmG2b9lxRqwU2wCvVJ7y69gQEwT74iR8b51ycziBNWt
AEQ+BUN9oVEIM6aHs9+jGgD843XIFZMWoKuwoD51036/wFDLO3lQNyuMytZaQtSB
q1epb51jl4tPhybWrWc+IoVp6BshIZs1m8+LhgRqLfJEj1znTZDXvAEuTuI3Y9BY
lyyvGuKNbe6q1aD8Hfu3qiO8PfBrI+pNpOcdw84pG6IwBz4vfLmhzyMd8vTyqoK8
DIlfYCiGJB0aqDBWhRyql8KM04/gSlEm2eZONsudNuMugvRIxU1IOBaKFwlP5Z98
y2/mYo/wLnVFKZE6cLp3Lxjpv4ENRJ1HkQe5JQak1ulq+XkUL9f82p7oGMJ4lvoB
iTOPTkuhhkiUYmwbb97VoqWTYwL+EptvsWto+Mv/glHy7OGXXJFTAD+ARpZc+c5I
f1/mzQYujmVj91XUi9xSGnL07mNNPOiX3p+9q7Fy+A3Rk1x5n0t+7hvmiuv8paLv
KNowhECllp0lBKns39tcn8BQvRufvxv2b+QvEqgUPVI3Qj8vEc4=
=+nxh
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control bulk updates from Linus Walleij:
"Core changes:
- New standard enumerator and corresponding device tree bindings for
output impedance pin configuration. (Implemented and used in the
Renesas rzg2l driver.)
- Cleanup of Kconfig and Makefile to be somewhat orderly and
alphabetic.
New drivers:
- Samsung Exynos 7885 pin controller.
- Ocelot LAN966x pin controller.
- Qualcomm SDX65 pin controller.
- Qualcomm SM8450 pin controller.
- Qualcomm PM8019, PM8226 and PM2250 pin controllers.
- NXP/Freescale i.MXRT1050 pin controller.
- Intel Thunder Bay pin controller.
Enhancements:
- Introduction of the string library helper function
"kasprintf_strarray()" and subsequent use in Rockchip, ST and
Armada pin control drivers, as well as the GPIO mockup driver.
- The Ocelot pin controller has been extensively rewritten to use
regmap and other modern kernel infrastructure.
- The Microchip SGPIO driver has been converted to use regmap.
- The SPEAr driver had been converted to use regmap.
- Substantial cleanups and janitorial on the Apple pin control driver
that was merged for v5.16.
- Janitorial to remove of_node assignments in the GPIO portions that
anyway get this handled in the GPIO core.
- Minor cleanups and improvements in several pin controllers"
* tag 'pinctrl-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (98 commits)
pinctrl: imx: fix assigning groups names
dt-bindings: pinctrl: mt8195: add wrapping node of pin configurations
pinctrl: bcm: ns: use generic groups & functions helpers
pinctrl: imx: fix allocation result check
pinctrl: samsung: Use platform_get_irq_optional() to get the interrupt
pinctrl: Propagate firmware node from a parent device
dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings
pinctrl: add one more "const" for generic function groups
pinctrl: keembay: rework loops looking for groups names
pinctrl: keembay: comment process of building functions a bit
pinctrl: imx: prepare for making "group_names" in "function_desc" const
ARM: dts: gpio-ranges property is now required
pinctrl: aspeed: fix unmet dependencies on MFD_SYSCON for PINCTRL_ASPEED
pinctrl: Get rid of duplicate of_node assignment in the drivers
pinctrl-sunxi: don't call pinctrl_gpio_direction()
pinctrl-bcm2835: don't call pinctrl_gpio_direction()
pinctrl: bcm2835: Silence uninit warning
pinctrl: Sort Kconfig and Makefile entries alphabetically
pinctrl: Add Intel Thunder Bay pinctrl driver
dt-bindings: pinctrl: Add bindings for Intel Thunderbay pinctrl driver
...
This adds support for the StarFive JH7100, including the necessary
device drivers and DT files for the BeagleV Starlight prototype
board, with additional boards to be added later. This SoC promises
to be the first usable low-cost platform for RISC-V.
I've taken this through the SoC tree in the anticipation of adding
a few other Arm based SoCs as well, but those did not pass the
review in time, so it's only this one.
-----BEGIN PGP SIGNATURE-----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=X5uk
-----END PGP SIGNATURE-----
Merge tag 'newsoc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull RISC-V SoC updates from Arnd Bergmann:
"Add support for StarFive JH7100 RISC-V SoC
This adds support for the StarFive JH7100, including the necessary
device drivers and DT files for the BeagleV Starlight prototype board,
with additional boards to be added later. This SoC promises to be the
first usable low-cost platform for RISC-V.
I've taken this through the SoC tree in the anticipation of adding a
few other Arm based SoCs as well, but those did not pass the review in
time, so it's only this one"
* tag 'newsoc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
reset: starfive-jh7100: Fix 32bit compilation
RISC-V: Add BeagleV Starlight Beta device tree
RISC-V: Add initial StarFive JH7100 device tree
serial: 8250_dw: Add StarFive JH7100 quirk
dt-bindings: serial: snps-dw-apb-uart: Add JH7100 uarts
pinctrl: starfive: Add pinctrl driver for StarFive SoCs
dt-bindings: pinctrl: Add StarFive JH7100 bindings
dt-bindings: pinctrl: Add StarFive pinctrl definitions
reset: starfive-jh7100: Add StarFive JH7100 reset driver
dt-bindings: reset: Add Starfive JH7100 reset bindings
dt-bindings: reset: Add StarFive JH7100 reset definitions
clk: starfive: Add JH7100 clock generator driver
dt-bindings: clock: starfive: Add JH7100 bindings
dt-bindings: clock: starfive: Add JH7100 clock definitions
dt-bindings: interrupt-controller: Add StarFive JH7100 plic
dt-bindings: timer: Add StarFive JH7100 clint
RISC-V: Add StarFive SoC Kconfig option
On mt8195, the pinctrl node has pinctrl groups to group pin
configurations by users' need. In each pinctrl group, it has
subnode(s) to list pins needed and pin configurations. By supporting
multiple subnodes, we can configure different pin characteristics
(driving/pull-up/pull-down/etc.) in a pinctrl group.
Update pinctrl-mt8195.yaml to add subnode in pinctrl groups and an
example to illustrate the usage.
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211220121825.6446-4-tinghan.shen@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
1. Add support for Exynos7885.
2. Drop usage of platform_get_resource().
-----BEGIN PGP SIGNATURE-----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=hka6
-----END PGP SIGNATURE-----
Merge tag 'samsung-pinctrl-5.17' of https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel
Samsung pinctrl drivers changes for v5.17
1. Add support for Exynos7885.
2. Drop usage of platform_get_resource().
Add bindings for the GPIO/pin controller on the JH7100 RISC-V SoC by
StarFive Ltd. This is a test chip for their upcoming JH7110 SoC.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
This new SoC uses the same pinctrl hardware, so just add a new per-SoC
compatible.
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Add Device Tree bindings documentation and an entry in MAINTAINERS file
for Intel Thunder Bay SoC's pin controller.
Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
Link: https://lore.kernel.org/r/20211201072626.19599-2-lakshmi.sowjanya.d@intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Add generic support for output impedance,
- Add drive strength and output impedance support for the RZ/G2L SoC,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYan5bwAKCRCKwlD9ZEnx
cKxyAQCCsEC0VJNaD5TNsGt+ivfEyMpu5ZeKL3xb2qj0PMPKUgD/R09wo6KwZciv
OCUQy0jHYP880VG3AHkzdFVtG7SnjAc=
=n0dm
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v5.17-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v5.17
- Add generic support for output impedance,
- Add drive strength and output impedance support for the RZ/G2L SoC,
- Miscellaneous fixes and improvements.
Also fix some examples to avoid warnings like:
brcm,ns-pinmux.example.dt.yaml: pin-controller@1800c1c0: $nodename:0: 'pin-controller@1800c1c0' does not match '^pinctrl|pinmux@[0-9a-f]+$'
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211202063216.24439-1-zajec5@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This will bind to the PMGR pwrstate nodes that control power/clock
gating to SoC blocks. The pinctrl driver doesn't do runtime-pm yet, so
initially this will just keep the domain on permanently.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This reverts commit 3fe59cc4ff641b106cc24930204d4cd2c82f318f.
The bindings were not properly reviewed and were also
causing errors in the automatic checkers once applied.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In arch/arm/boot/dts/uniphier-pinctrl.dtsi, there are child nodes of
pinctrl that defines pinmux and pincfg, however, there are no rules about
that in dt-bindings.
'make dtbs_check' results an error with the following message:
pinctrl: 'ain1', 'ain2', 'ainiec1', 'aout', 'aout1', 'aout2', ...
... 'usb2', 'usb3' do not match any of the regexes: 'pinctrl-[0-9]+'
To avoid the issue, add the rules of pinmux and pincfg in each child node
and grandchild node.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1636416699-21033-1-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
