IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
For bundle receives to function properly, the previous iteration msg_inq
value is needed to make a judgement call on how much data there is to
receive. A previous fix ended up clearing it earlier as an error case
would potentially errantly set IORING_CQE_F_SOCK_NONEMPTY if the request
got failed.
Move the assignment to post assigning buffers for the receive, but
ensure that it's cleared for the buffer selection error case. With that,
buffer selection has the right msg_inq value and can correctly bundle
receives as designed.
Noticed while testing where it was apparent than more than 1 buffer was
never received. After fix was in place, multiple buffers are correctly
picked for receive. This provides a 10x speedup for the test case, as
the buffer size used was 64b.
Fixes: 18414a4a2eab ("io_uring/net: assign kmsg inq/flags before buffer selection")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When using MSI/INTx interrupt, the shared interrupts are still being
handled in the device remove routine, before free IRQs. So isb memory
is still read after it is freed. Thus move wx_free_isb_resources()
from txgbe_close() to txgbe_remove(). And fix the improper isb free
action in txgbe_open() error handling path.
Fixes: aefd013624a1 ("net: txgbe: use irq_domain for interrupt controller")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Rename original txgbe_misc_irq_handle() to txgbe_misc_irq_thread_fn()
since it is the handle thread to wake up. And add the primary handler
to deal the case of MSI/INTx, because there is a schedule NAPI poll.
Fixes: aefd013624a1 ("net: txgbe: use irq_domain for interrupt controller")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When using MSI or INTx interrupts, request_irq() for pdev->irq will
conflict with request_threaded_irq() for txgbe->misc.irq, to cause
system crash. So remove txgbe_request_irq() for MSI/INTx case, and
rename txgbe_request_msix_irqs() since it only request for queue irqs.
Add wx->misc_irq_domain to determine whether the driver creates an IRQ
domain and threaded request the IRQs.
Fixes: aefd013624a1 ("net: txgbe: use irq_domain for interrupt controller")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When using MSI/INTx interrupts, wx->num_q_vectors is uninitialized.
Thus there will be kernel panic in wx_alloc_q_vectors() to allocate
queue vectors.
Fixes: 3f703186113f ("net: libwx: Add irq flow functions")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The global hci_hotkey_quickstart quirk flag is tested in
toshiba_acpi_enable_hotkeys() before the quirk flag is properly
initialized based on SMBIOS data. This causes the quirk to be
applied to all models, some of which behave erratically as a
result.
Fix this by initializing the global quirk flags during module
initialization before registering the ACPI driver. This also
allows us to mark toshiba_dmi_quirks[] as __initconst.
Fixes: 23f1d8b47d12 ("platform/x86: toshiba_acpi: Add quirk for buttons on Z830")
Reported-by: kemal <kmal@cock.li>
Closes: https://lore.kernel.org/platform-driver-x86/R4CYFS.TWB8QUU2SHWI1@cock.li/
Tested-by: kemal <kmal@cock.li>
Cc: stable@vger.kernel.org
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240701194539.348937-1-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Correct member @num_por with size of right array @emac_v4_0_0_por for
struct ethqos_emac_driver_data @emac_v4_0_0_data.
Cc: stable@vger.kernel.org
Fixes: 8c4d92e82d50 ("net: stmmac: dwmac-qcom-ethqos: add support for emac4 on sa8775p platforms")
Signed-off-by: Yijie Yang <quic_yijiyang@quicinc.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20240701014720.2547856-1-quic_yijiyang@quicinc.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We only use the mapping in a single context, so kmap_local is sufficient
and cheaper. Make sure to use skb_frag_foreach_page as skb frags may
contain compound pages and we need to map page by page.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202406161539.b5ff7b20-oliver.sang@intel.com
Fixes: 950fcaecd5cc ("datagram: consolidate datagram copy to iter helpers")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://patch.msgid.link/20240626100008.831849-1-sagi@grimberg.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As it turns out, there is a large number of out-of-tree DTSes (in
OpenWrt project) that used to specify incorrect (active high) polarity
for the Lantiq reset GPIO, so to keep compatibility while they are
being updated a quirk for force the polarity low is needed. Luckily
these old DTSes used nonstandard name for the property ("gpio-reset" vs
"reset-gpios") so the quirk will not hurt if there are any new devices
that need inverted polarity as they can specify the right polarity in
their DTS when using the standard "reset-gpios" property.
Additionally the condition to enable the transition from standard to
non-standard reset GPIO property name was inverted and the replacement
name for the property was not correct. Fix this as well.
Fixes: fbbbcd177a27 ("gpiolib: of: add quirk for locating reset lines with legacy bindings")
Fixes: 90c2d2eb7ab5 ("MIPS: pci: lantiq: switch to using gpiod API")
Reported-by: Martin Schiller <ms@dev.tdt.de>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/ZoLpqv1PN08xHioh@google.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
A couple of error leg problems, one affecting scsi_debug and the other
affecting pure SAS (i.e. not SATA) SCSI expanders.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZoMgiiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYTGAP9/+7vP
DR1Y6KucMx4XjvwkPL5DNxOyobq6poSktn8hqQD/ReaafXaC4H4l7bn2JEpeBO9P
vYog76vSs2jELmEEeHc=
=/weJ
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"A couple of error leg problems, one affecting scsi_debug and the other
affecting pure SAS (i.e. not SATA) SCSI expanders"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: libsas: Fix exp-attached device scan after probe failure scanned in again after probe failed
scsi: scsi_debug: Fix create target debugfs failure
On vPro systems, the configuration of the I219-LM to achieve power
gating and S0ix residency is split between the driver and the CSME FW.
It was discovered that in some scenarios, where the network cable is
connected and then disconnected, S0ix residency is not always reached.
This was root-caused to a subset of I219-LM register writes that are not
performed by the CSME FW. Therefore, the driver should perform these
register writes on corporate setups, regardless of the CSME FW state.
This was discovered on Meteor Lake systems; however it is likely to
appear on other platforms as well.
Fixes: cc23f4f0b6b9 ("e1000e: Add support for Meteor Lake")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218589
Signed-off-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240628201754.2744221-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEUEC6huC2BN0pvD5fKDiiPnotvG8FAmaCVQYTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAoOKI+ei28b89jB/490FAkfBaAKmSKeUlbmzIk6mQZlee1
fE1y1rLH6XES20vxy0CaLd3CHlj0Y9N7Kmt5TJ6Ao+qOq2ik37bIr0SnBpfDBJGX
wuPIPGz850s+FhiJtZrgRoVTIJcwsze84UKDEirR1x6G7QBGT4da4dlfAaDPvpm6
sQHRmt+iUwZ7pM41cEzcaNkEqbfpaaGEVg9nqs6QmEabAk2r5reRr+HNjfKLvGyI
lR5a9DZ4bhZOlcbFihHUxndrninCfNfUMOgJ2wpcSzKQKtw9dREjGjTpHtiQqnMI
y+QYPuvPnNKO7ZIzHJBb5w5HouzvIp5efjgWiCLXz4sLBwi1/zsT8FbS
=dOI5
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-6.10-20240701' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2024-07-01
Jimmy Assarsson's patch for the kvaser_usb adds a missing explicit
initialization of the struct kvaser_usb_driver_info::family for the
kvaser_usb_driver_info_leafimx.
* tag 'linux-can-fixes-for-6.10-20240701' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: kvaser_usb: Explicitly initialize family in leafimx driver_info struct
====================
Link: https://patch.msgid.link/20240701080643.1354022-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The call to radeon_vm_clear_freed might clear bo_va->bo, so
we have to check it before dereferencing it.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Potential out of bounds access in dml2_calculate_rq_and_dlg_params()
because the value of out_lowest_state_idx used as an index for FCLKChangeSupport
array can be greater than 1.
[How]
Currently dml2 core specifies identical values for all FCLKChangeSupport
elements. Always use index 0 in the condition to avoid out of bounds access.
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some of the panels does not have the refresh rate range info
in base EDID and only have the refresh rate range info in
DisplayID block.
It will cause the max/min freesync refresh rate set to 0.
[How]
Try to parse the refresh rate range info from DisplayID if the
max/min refresh rate is 0.
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
We need to ensure to take into account cursor prefetch BW in
mode support or we may pass ModeQuery but fail an actual flip
which will cause a hang. Flip may fail because the cursor_pre_bw
is populated during mode programming (and mode programming is
never called prior to ModeQuery).
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 2f7b1d8b5505 ("clk: mediatek: Do a runtime PM get on controllers
during probe") enabled runtime PM for all mediatek clock controllers,
but this introduced an issue on the resume path.
If a device resumes earlier than the clock controller and calls
clk_prepare() when runtime PM is enabled on the controller, it will end
up calling clk_pm_runtime_get(). But the subsequent
pm_runtime_resume_and_get() call will fail because the runtime PM is
temporarily disabled during suspend.
To workaround this, introduce a need_runtime_pm flag and only enable it
on mt8183-mfgcfg, which is the driver that observed deadlock previously.
Hopefully mt8183-cfgcfg won't run into the issue at the resume stage
because the GPU should have stopped rendering before the system calls
suspend.
Fixes: 2f7b1d8b5505 ("clk: mediatek: Do a runtime PM get on controllers during probe")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Link: https://lore.kernel.org/r/20240613120357.1043342-1-treapking@chromium.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
[Why]
We only enable the VRR while monitor usable refresh rate range
is greater than 10 Hz.
But we did not check the range in DRM_EDID_FEATURE_CONTINUOUS_FREQ
case.
[How]
Add a refresh rate range check before set the freesync_capable flag
in DRM_EDID_FEATURE_CONTINUOUS_FREQ case.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Sometimes the new_crtc_state->vrr_infopacket did not sync up with the
current state.
It will affect the update_freesync_state_on_stream() does not update
the state correctly.
[How]
Reset the freesync config before get_freesync_config_for_crtc() to
make sure we have the correct new_crtc_state for VRR.
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Fix min/max rate clamping that caused a regression back in 6.9
-----BEGIN PGP SIGNATURE-----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=lu3B
-----END PGP SIGNATURE-----
Merge tag 'sunxi-clk-fixes-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-fixes
Pull one Allwinner SoC clk driver fix for 6.10
- Fix min/max rate clamping that caused a regression back in 6.9
* tag 'sunxi-clk-fixes-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
clk: sunxi-ng: common: Don't call hw_to_ccu_common on hw without common
- Fix no cxl_nvd during pmem region auto-assemble
- Avoid NULLL pointer dereference in region lookup
- Add missing checks to interleave capability
- Add cxl kdoc fix to address document compilation error
-----BEGIN PGP SIGNATURE-----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=6MV8
-----END PGP SIGNATURE-----
Merge tag 'cxl-fixes-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dave Jiang:
- Fix no cxl_nvd during pmem region auto-assemble
- Avoid NULLL pointer dereference in region lookup
- Add missing checks to interleave capability
- Add cxl kdoc fix to address document compilation error
* tag 'cxl-fixes-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl: documentation: add missing files to cxl driver-api
cxl/region: check interleave capability
cxl/region: Avoid null pointer dereference in region lookup
cxl/mem: Fix no cxl_nvd during pmem region auto-assembling
-----BEGIN PGP SIGNATURE-----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=RkBU
-----END PGP SIGNATURE-----
Merge tag 'for-6.10-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"A fixup for a recent fix that prevents an infinite loop during block
group reclaim.
Unfortunately it introduced an unsafe way of updating block group list
and could race with relocation. This could be hit on fast devices when
relocation/balance does not have enough space"
* tag 'for-6.10-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix adding block group to a reclaim list and the unused list during reclaim
ON/OFF in the keys was swapped between the first and second argument of
the prctl. The prctl key is always PR_RISCV_SET_ICACHE_FLUSH_CTX, and
the second argument can be PR_RISCV_CTX_SW_FENCEI_ON or
PR_RISCV_CTX_SW_FENCEI_OFF.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Fixes: 6a08e4709c58 ("documentation: Document PR_RISCV_SET_ICACHE_FLUSH_CTX prctl")
Link: https://lore.kernel.org/r/20240628-fix_cmodx_example-v1-1-e6c6523bc163@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This fixes up a last minute build regression from the previous
set of bug fixes.
-----BEGIN PGP SIGNATURE-----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=mBs0
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-fixes-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fix from Arnd Bergmann:
"This fixes up a last minute build regression from the previous set of
bug fixes"
* tag 'asm-generic-fixes-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
syscalls: fix sys_fanotify_mark prototype
A number of devicetree fixes came in for the rockchip platforms, correcting
some of the address information, and reverting a change to the MMC controller
configuration that caused regressions.
Four drivers have one code change each, addressing minor build issues for
the optee firmware driver, the litex SoC platform driver and two reset
drivers.
The riscv fixes as also simple, mainly turning off device nodes in the
canaan dts files unless they are actually usable on a particular board.
Finally, Drew takes over maintaining the THEAD RISC-V SoC platform.
-----BEGIN PGP SIGNATURE-----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=+O9s
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"A number of devicetree fixes came in for the rockchip platforms,
correcting some of the address information, and reverting a change to
the MMC controller configuration that caused regressions.
Four drivers have one code change each, addressing minor build issues
for the optee firmware driver, the litex SoC platform driver and two
reset drivers.
The riscv fixes as also simple, mainly turning off device nodes in the
canaan dts files unless they are actually usable on a particular
board.
Finally, Drew takes over maintaining the THEAD RISC-V SoC platform"
* tag 'arm-fixes-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
drivers/soc/litex: drop obsolete dependency on COMPILE_TEST
tee: optee: ffa: Fix missing-field-initializers warning
arm64: dts: rockchip: Add sound-dai-cells for RK3368
arm64: dts: rockchip: Fix the i2c address of es8316 on Cool Pi 4B
reset: hisilicon: hi6220: add missing MODULE_DESCRIPTION() macro
reset: gpio: Fix missing gpiolib dependency for GPIO reset controller
MAINTAINERS: thead: update Maintainer
arm64: dts: rockchip: fix PMIC interrupt pin on ROCK Pi E
riscv: dts: starfive: Set EMMC vqmmc maximum voltage to 3.3V on JH7110 boards
arm64: dts: rockchip: make poweroff(8) work on Radxa ROCK 5A
Revert "arm64: dts: rockchip: remove redundant cd-gpios from rk3588 sdmmc nodes"
ARM: dts: rockchip: rk3066a: add #sound-dai-cells to hdmi node
arm64: dts: rockchip: Fix the value of `dlg,jack-det-rate` mismatch on rk3399-gru
arm64: dts: rockchip: set correct pwm0 pinctrl on rk3588-tiger
riscv: dts: canaan: Disable I/O devices unless used
riscv: dts: canaan: Clean up serial aliases
arm64: dts: rockchip: Rename LED related pinctrl nodes on rk3308-rock-pi-s
arm64: dts: rockchip: Fix SD NAND and eMMC init on rk3308-rock-pi-s
arm64: dts: rockchip: Fix rk3308 codec@ff560000 reset-names
arm64: dts: rockchip: Fix the DCDC_REG2 minimum voltage on Quartz64 Model B
Rockchip NAND controller driver was not checking the timings properly
and the introduction of NV-DDR support broke it.
The core was also misbehaving in some very specific cases: in case of
(unlikely) bitflips in the parameter page, the fallback might have
failed as well but for software reasons.
Finally, the chosen ECC configuration was no longer properly propagated
to upper layers, mostly failing an info message at probe time.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmaCmhsACgkQJWrqGEe9
VoQsIQf+OBYRAEI5q31rPnGQUnt1NFIjbVKdcdTu6fSK3Xb+DcXsPEJrYdh3RFQz
tbT+yZ0KzGHxo7e0e+K5SqtlpmBAyT6SZi00jfaag0qgvU8R+px7Okcywc6iIdCX
7lIDnyrMy8kurz6FsJ7I9CvwCUiWOCmJTJbVSfnHvCg8TdfH7Sk2i02aDYyvEbcC
YKxGpZTLqwE7DFP0N9IdQ9j3Ke5gZu6+q3HdMpCZp/cDuLOsmStmomykPGDWjxDC
K72GqDT/kXqm7T5jHKAlFqm5nirDfqscuwGbiGcgOoM0JKFYicLe/bC2JL2HJr5M
ujGxeC379kjRcofm5hny8BWPxb9kuA==
=kC92
-----END PGP SIGNATURE-----
Merge tag 'mtd/fixes-for-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
- Rockchip NAND controller driver was not checking the timings properly
and the introduction of NV-DDR support broke it.
- The core was also misbehaving in some very specific cases: in case of
(unlikely) bitflips in the parameter page, the fallback might have
failed as well but for software reasons.
- Finally, the chosen ECC configuration was no longer properly
propagated to upper layers, mostly failing an info message at probe
time.
* tag 'mtd/fixes-for-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: rockchip: ensure NVDDR timings are rejected
mtd: rawnand: Bypass a couple of sanity checks during NAND identification
mtd: rawnand: Fix the nand_read_data_op() early check
mtd: rawnand: Ensure ECC configuration is propagated to upper layers
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZoJSmAAKCRCRxhvAZXjc
ot3tAQCUjJh7jZvmmkUV0pF51JI1jEumk8d8vPORGsm1A6oMawEA+tyiWYkcIU3t
JUFGZSDce5MuJEI/frDPb98CW2dLkQA=
=fVtx
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.10-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"Misc:
- Don't misleadingly warn during filesystem thaw operations.
It's possible that a block device which was frozen before it was
mounted can cause a failing thaw operation if someone concurrently
tried to mount it while that thaw operation was issued and the
device had already been temporarily claimed for the mount (The
mount will of course be aborted because the device is frozen).
netfs:
- Fix io_uring based write-through. Make sure that the total request
length is correctly set.
- Fix partial writes to folio tail.
- Remove some xarray helpers that were intended for bounce buffers
which got defered to a later patch series.
- Make netfs_page_mkwrite() whether folio->mapping is vallid after
acquiring the folio lock.
- Make netfs_page_mkrite() flush conflicting data instead of waiting.
fsnotify:
- Ensure that fsnotify creation events are generated before fsnotify
open events when a file is created via ->atomic_open(). The
ordering was broken before.
- Ensure that no fsnotify events are generated for O_PATH file
descriptors. While no fsnotify open events were generated, fsnotify
close events were. Make it consistent and don't produce any"
* tag 'vfs-6.10-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
netfs: Fix netfs_page_mkwrite() to flush conflicting data, not wait
netfs: Fix netfs_page_mkwrite() to check folio->mapping is valid
netfs: Delete some xarray-wangling functions that aren't used
netfs: Fix early issue of write op on partial write to folio tail
netfs: Fix io_uring based write-through
vfs: generate FS_CREATE before FS_OPEN when ->atomic_open used.
fsnotify: Do not generate events for O_PATH file descriptors
fs: don't misleadingly warn during thaw operations
There is a potential parallel list adding for retrying in
btrfs_reclaim_bgs_work and adding to the unused list. Since the block
group is removed from the reclaim list and it is on a relocation work,
it can be added into the unused list in parallel. When that happens,
adding it to the reclaim list will corrupt the list head and trigger
list corruption like below.
Fix it by taking fs_info->unused_bgs_lock.
[177.504][T2585409] BTRFS error (device nullb1): error relocating ch= unk 2415919104
[177.514][T2585409] list_del corruption. next->prev should be ff1100= 0344b119c0, but was ff11000377e87c70. (next=3Dff110002390cd9c0)
[177.529][T2585409] ------------[ cut here ]------------
[177.537][T2585409] kernel BUG at lib/list_debug.c:65!
[177.545][T2585409] Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI
[177.555][T2585409] CPU: 9 PID: 2585409 Comm: kworker/u128:2 Tainted: G W 6.10.0-rc5-kts #1
[177.568][T2585409] Hardware name: Supermicro SYS-520P-WTR/X12SPW-TF, BIOS 1.2 02/14/2022
[177.579][T2585409] Workqueue: events_unbound btrfs_reclaim_bgs_work[btrfs]
[177.589][T2585409] RIP: 0010:__list_del_entry_valid_or_report.cold+0x70/0x72
[177.624][T2585409] RSP: 0018:ff11000377e87a70 EFLAGS: 00010286
[177.633][T2585409] RAX: 000000000000006d RBX: ff11000344b119c0 RCX:0000000000000000
[177.644][T2585409] RDX: 000000000000006d RSI: 0000000000000008 RDI:ffe21c006efd0f40
[177.655][T2585409] RBP: ff110002e0509f78 R08: 0000000000000001 R09:ffe21c006efd0f08
[177.665][T2585409] R10: ff11000377e87847 R11: 0000000000000000 R12:ff110002390cd9c0
[177.676][T2585409] R13: ff11000344b119c0 R14: ff110002e0508000 R15:dffffc0000000000
[177.687][T2585409] FS: 0000000000000000(0000) GS:ff11000fec880000(0000) knlGS:0000000000000000
[177.700][T2585409] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[177.709][T2585409] CR2: 00007f06bc7b1978 CR3: 0000001021e86005 CR4:0000000000771ef0
[177.720][T2585409] DR0: 0000000000000000 DR1: 0000000000000000 DR2:0000000000000000
[177.731][T2585409] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:0000000000000400
[177.742][T2585409] PKRU: 55555554
[177.748][T2585409] Call Trace:
[177.753][T2585409] <TASK>
[177.759][T2585409] ? __die_body.cold+0x19/0x27
[177.766][T2585409] ? die+0x2e/0x50
[177.772][T2585409] ? do_trap+0x1ea/0x2d0
[177.779][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72
[177.788][T2585409] ? do_error_trap+0xa3/0x160
[177.795][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72
[177.805][T2585409] ? handle_invalid_op+0x2c/0x40
[177.812][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72
[177.820][T2585409] ? exc_invalid_op+0x2d/0x40
[177.827][T2585409] ? asm_exc_invalid_op+0x1a/0x20
[177.834][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72
[177.843][T2585409] btrfs_delete_unused_bgs+0x3d9/0x14c0 [btrfs]
There is a similar retry_list code in btrfs_delete_unused_bgs(), but it is
safe, AFAICS. Since the block group was in the unused list, the used bytes
should be 0 when it was added to the unused list. Then, it checks
block_group->{used,reserved,pinned} are still 0 under the
block_group->lock. So, they should be still eligible for the unused list,
not the reclaim list.
The reason it is safe there it's because because we're holding
space_info->groups_sem in write mode.
That means no other task can allocate from the block group, so while we
are at deleted_unused_bgs() it's not possible for other tasks to
allocate and deallocate extents from the block group, so it can't be
added to the unused list or the reclaim list by anyone else.
The bug can be reproduced by btrfs/166 after a few rounds. In practice
this can be hit when relocation cannot find more chunk space and ends
with ENOSPC.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Suggested-by: Johannes Thumshirn <Johannes.Thumshirn@wdc.com>
Fixes: 4eb4e85c4f81 ("btrfs: retry block group reclaim without infinite loop")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
My earlier fix missed an incorrect function prototype that shows up on
native 32-bit builds:
In file included from fs/notify/fanotify/fanotify_user.c:14:
include/linux/syscalls.h:248:25: error: conflicting types for 'sys_fanotify_mark'; have 'long int(int, unsigned int, u32, u32, int, const char *)' {aka 'long int(int, unsigned int, unsigned int, unsigned int, int, const char *)'}
1924 | SYSCALL32_DEFINE6(fanotify_mark,
| ^~~~~~~~~~~~~~~~~
include/linux/syscalls.h:862:17: note: previous declaration of 'sys_fanotify_mark' with type 'long int(int, unsigned int, u64, int, const char *)' {aka 'long int(int, unsigned int, long long unsigned int, int, const char *)'}
On x86 and powerpc, the prototype is also wrong but hidden in an #ifdef,
so it never caused problems.
Add another alternative declaration that matches the conditional function
definition.
Fixes: 403f17a33073 ("parisc: use generic sys_fanotify_mark implementation")
Cc: stable@vger.kernel.org
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
or wrong properties, this reverts the previous move away from
cd-gpios to the mmc-controller's internal card-detect.
With this change applied, it was reported that boards could not
detect card anymore, so this go reverted of course.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmZ92SwQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgSDBB/95oWtHr8L4LZYeedAQLuf6regICaIIfjas
7skbt+e4Nryl5B0eaieHd9UtotS+FWw/1T6fOIoACMLILUsbqtffUOyhP+yJsG3O
fXFvi+8Mn9OOCbY1X28UTMnaLG1BLfc4TnMKXZsl6Rxt+pV0ktL9ZVUPzZOMA1tW
Ssj7xgNDfi/xqjx5PqNluHWM3XHXABWjUWwRjNebbgmyVWdo3vmU5QxayVPd0AzF
iSisrWojWLEVfL4+aQi2ten7udfSre7eB80KIySIQIoWzArqpt88/8LF+KM1jYpU
uTGqbC2azGXqAgOnSKcAlj/ogmZpkjb+oPdJKtBuFjPvgMBFAqQR
=vK3N
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=be1d
-----END PGP SIGNATURE-----
Merge tag 'v6.10-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Apart from the regular dts fixes for wrong addresses, missing
or wrong properties, this reverts the previous move away from
cd-gpios to the mmc-controller's internal card-detect.
With this change applied, it was reported that boards could not
detect card anymore, so this go reverted of course.
* tag 'v6.10-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Add sound-dai-cells for RK3368
arm64: dts: rockchip: Fix the i2c address of es8316 on Cool Pi 4B
arm64: dts: rockchip: fix PMIC interrupt pin on ROCK Pi E
arm64: dts: rockchip: make poweroff(8) work on Radxa ROCK 5A
Revert "arm64: dts: rockchip: remove redundant cd-gpios from rk3588 sdmmc nodes"
ARM: dts: rockchip: rk3066a: add #sound-dai-cells to hdmi node
arm64: dts: rockchip: Fix the value of `dlg,jack-det-rate` mismatch on rk3399-gru
arm64: dts: rockchip: set correct pwm0 pinctrl on rk3588-tiger
arm64: dts: rockchip: Rename LED related pinctrl nodes on rk3308-rock-pi-s
arm64: dts: rockchip: Fix SD NAND and eMMC init on rk3308-rock-pi-s
arm64: dts: rockchip: Fix rk3308 codec@ff560000 reset-names
arm64: dts: rockchip: Fix the DCDC_REG2 minimum voltage on Quartz64 Model B
Link: https://lore.kernel.org/r/10237789.nnTZe4vzsl@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
in rare cases, e.g. for injecting a machine check we do intercept all
load PSW instructions via ICTL_LPSW. With facility 193 a new variant
LPSWEY was added. KVM needs to handle that as well.
Fixes: a3efa8429266 ("KVM: s390: gen_facilities: allow facilities 165, 193, 194 and 196")
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Message-ID: <20240628163547.2314-1-borntraeger@linux.ibm.com>
- Ignore too large handle values in BIG
- L2CAP: sync sock recv cb and release
- hci_bcm4377: Fix msgid release
- ISO: Check socket flag instead of hcon
- hci_event: Fix setting of unicast qos interval
- hci: disallow setting handle bigger than HCI_CONN_HANDLE_MAX
- Add quirk to ignore reserved PHY bits in LE Extended Adv Report
- hci_core: cancel all works upon hci_unregister_dev
- btintel_pcie: Fix REVERSE_INULL issue reported by coverity
- qca: Fix BT enable failure again for QCA6390 after warm reboot
-----BEGIN PGP SIGNATURE-----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=X7As
-----END PGP SIGNATURE-----
Merge tag 'for-net-2024-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth into main
bluetooth pull request for net:
- Ignore too large handle values in BIG
- L2CAP: sync sock recv cb and release
- hci_bcm4377: Fix msgid release
- ISO: Check socket flag instead of hcon
- hci_event: Fix setting of unicast qos interval
- hci: disallow setting handle bigger than HCI_CONN_HANDLE_MAX
- Add quirk to ignore reserved PHY bits in LE Extended Adv Report
- hci_core: cancel all works upon hci_unregister_dev
- btintel_pcie: Fix REVERSE_INULL issue reported by coverity
- qca: Fix BT enable failure again for QCA6390 after warm reboot
Signed-off-by: David S. Miller <davem@davemloft.net>
I don't see anything checking that TCP_METRICS_ATTR_SADDR_IPV4
is at least 4 bytes long, and the policy doesn't have an entry
for this attribute at all (neither does it for IPv6 but v6 is
manually validated).
Reviewed-by: Eric Dumazet <edumazet@google.com>
Fixes: 3e7013ddf55a ("tcp: metrics: Allow selective get/del of tcp-metrics based on src IP")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
For MTL+ platforms we use PICA chips for Type-C support and
hence mg programming is not needed.
Fixes issue with drm warn of TC port not being in legacy mode.
Cc: stable@vger.kernel.org
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625111840.597574-1-mika.kahola@intel.com
(cherry picked from commit aaf9dc86bd806458f848c39057d59e5aa652a399)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Explicitly set the 'family' driver_info struct member for leafimx.
Previously, the correct operation relied on KVASER_LEAF being the first
defined value in enum kvaser_usb_leaf_family.
Fixes: e6c80e601053 ("can: kvaser_usb: kvaser_usb_leaf: fix CAN clock frequency regression")
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20240628194529.312968-1-extja@kvaser.com
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
- Add NOLPM quirk for for all Crucial BX SSD1 models.
Considering that we now have had bug reports for 3 different BX SSD1
variants from Crucial with the same product name, make the quirk more
inclusive, to catch more device models from the same generation.
- Fix a trivial null pointer dereference in the error path for
ata_host_release().
- Create a ata_port_free(), so that we don't miss freeing ata_port struct
members when freeing a struct ata_port.
- Fix a trivial double free in the error path for ata_host_alloc().
- Ensure that we remove the libata "remapped NVMe device count" sysfs
entry on .probe() error.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRN+ES/c4tHlMch3DzJZDGjmcZNcgUCZoHMzwAKCRDJZDGjmcZN
cj4wAP4nHi3Jr/ezwrIahwMGXV/VSlUhxOakj3OADdHe5spIogD/SrR8Uz7/m5QC
sMF0Rd2L7tfrQSDdJ/MztBi7cVprtQo=
=lnku
-----END PGP SIGNATURE-----
Merge tag 'ata-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- Add NOLPM quirk for for all Crucial BX SSD1 models.
Considering that we now have had bug reports for 3 different BX SSD1
variants from Crucial with the same product name, make the quirk more
inclusive, to catch more device models from the same generation.
- Fix a trivial NULL pointer dereference in the error path for
ata_host_release().
- Create a ata_port_free(), so that we don't miss freeing ata_port
struct members when freeing a struct ata_port.
- Fix a trivial double free in the error path for ata_host_alloc().
- Ensure that we remove the libata "remapped NVMe device count" sysfs
entry on .probe() error.
* tag 'ata-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: ahci: Clean up sysfs file on error
ata: libata-core: Fix double free on error
ata,scsi: libata-core: Do not leak memory for ata_port struct members
ata: libata-core: Fix null pointer dereference on error
ata: libata-core: Add ATA_HORKAGE_NOLPM for all Crucial BX SSD1 models
.probe() (ahci_init_one()) calls sysfs_add_file_to_group(), however,
if probe() fails after this call, we currently never call
sysfs_remove_file_from_group().
(The sysfs_remove_file_from_group() call in .remove() (ahci_remove_one())
does not help, as .remove() is not called on .probe() error.)
Thus, if probe() fails after the sysfs_add_file_to_group() call, the next
time we insmod the module we will get:
sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:04.0/remapped_nvme'
CPU: 11 PID: 954 Comm: modprobe Not tainted 6.10.0-rc5 #43
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
sysfs_warn_dup.cold+0x17/0x23
sysfs_add_file_mode_ns+0x11a/0x130
sysfs_add_file_to_group+0x7e/0xc0
ahci_init_one+0x31f/0xd40 [ahci]
Fixes: 894fba7f434a ("ata: ahci: Add sysfs attribute to show remapped NVMe device count")
Cc: stable@vger.kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240629124210.181537-10-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
libsas is currently not freeing all the struct ata_port struct members,
e.g. ncq_sense_buf for a driver supporting Command Duration Limits (CDL).
Add a function, ata_port_free(), that is used to free a ata_port,
including its struct members. It makes sense to keep the code related to
freeing a ata_port in its own function, which will also free all the
struct members of struct ata_port.
Fixes: 18bd7718b5c4 ("scsi: ata: libata: Handle completion of CDL commands using policy 0xD")
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240629124210.181537-8-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
- Remove the executable bit from installed DTB files
- Escape $ in subshell execution in the debian-orig target
- Fix RPM builds with CONFIG_MODULES=n
- Fix xconfig with the O= option
- Fix scripts_gdb with the O= option
-----BEGIN PGP SIGNATURE-----
iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmaBjccVHG1hc2FoaXJv
eUBrZXJuZWwub3JnAAoJED2LAQed4NsGkugP+wdEiVWMpps+/CpTJuvSroEv0Kos
Qqy0iQO9JP77tHfLnnMG2+tSvJh6nk7weitoiSkUuCfXde/8Y7HfvdldxzJI4kJD
HkJF6b0MCbZDPkvAQhj8CCtsGKNy7X020047/qVUK9OrNH1HZiLOvFNirYuN3nrF
T4/HK098S1ij8oAcF1F7psB231pXijQmIeMpVJAhjh9T3Kimu3tGENcVi1yu42tg
/emZvhgst1eCOz/e02GHt7n8v5SncYnT5/eBPmZ+nd19uW1QMLY0xES6/dpEd/hN
/jjMppqPPlJaYewIHXH8qaejcjyom/CBgxc9B6phGRd8IVR4YjK6DzPiwoAHXcvs
KWoJUfLX4FV3PvoaW4XiKifW4lnaADy11bZjIXiV2PHSM/PBNNNtS6BZQv/gB+Sa
a5qPRGjhc55pDIv63vTdEZ1HekWp8/XO5HkzWAFnInB+Fnuxqtwx8a6taM7Vgadq
O1K4b17UedmFMHSB4UUDKra+7pS0ZP6hLXzozGf3AS/TgUHMTvU8mN0+2k4kxJol
dA84pJUHBdnn/61SplNw2PBfP7QYhNJWfPU91Mn/noBwF/sMRFatCuFEgscgP2h+
0itls2RT1Z4dPN/XN7UiJ8s4vdeYkwCJGhMDIfFe/g3JWFYTuGPeKATVPJZ0DWzz
6otCioAfqFFotky7
=JlIv
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Remove the executable bit from installed DTB files
- Escape $ in subshell execution in the debian-orig target
- Fix RPM builds with CONFIG_MODULES=n
- Fix xconfig with the O= option
- Fix scripts_gdb with the O= option
* tag 'kbuild-fixes-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: scripts/gdb: bring the "abspath" back
kbuild: Use $(obj)/%.cc to fix host C++ module builds
kbuild: rpm-pkg: fix build error with CONFIG_MODULES=n
kbuild: Fix build target deb-pkg: ln: failed to create hard link
kbuild: doc: Update default INSTALL_MOD_DIR from extra to updates
kbuild: Install dtb files as 0644 in Makefile.dtbinst
The kernel test robot reported that clang no longer compiles the 32-bit
x86 kernel in some configurations due to commit 95ece48165c1
("locking/atomic/x86: Rewrite x86_32 arch_atomic64_{,fetch}_{and,or,xor}()
functions").
The build fails with
arch/x86/include/asm/cmpxchg_32.h:149:9: error: inline assembly requires more registers than available
and the reason seems to be that not only does the cmpxchg8b instruction
need four fixed registers (EDX:EAX and ECX:EBX), with the emulation
fallback the inline asm also wants a fifth fixed register for the
address (it uses %esi for that, but that's just a software convention
with cmpxchg8b_emu).
Avoiding using another pointer input to the asm (and just forcing it to
use the "0(%esi)" addressing that we end up requiring for the sw
fallback) seems to fix the issue.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406230912.F6XFIyA6-lkp@intel.com/
Fixes: 95ece48165c1 ("locking/atomic/x86: Rewrite x86_32 arch_atomic64_{,fetch}_{and,or,xor}() functions")
Link: https://lore.kernel.org/all/202406230912.F6XFIyA6-lkp@intel.com/
Suggested-by: Uros Bizjak <ubizjak@gmail.com>
Reviewed-and-Tested-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here are some small driver fixes for 6.10-rc6. Included in here are:
- IIO driver fixes for reported issues
- Counter driver fix for a reported problem.
All of these have been in linux-next this week with no reported issues
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZoFlrA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymiMQCgkUmsCT9KQDt+/IqClfL+A6nBvUkAn08jRwGA
dXjTvroHgHsNCU/VXMwV
=FcWr
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small driver fixes for 6.10-rc6. Included in here are:
- IIO driver fixes for reported issues
- Counter driver fix for a reported problem.
All of these have been in linux-next this week with no reported
issues"
* tag 'char-misc-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
counter: ti-eqep: enable clock at probe
iio: chemical: bme680: Fix sensor data read operation
iio: chemical: bme680: Fix overflows in compensate() functions
iio: chemical: bme680: Fix calibration data variable
iio: chemical: bme680: Fix pressure value output
iio: humidity: hdc3020: fix hysteresis representation
iio: dac: fix ad9739a random config compile error
iio: accel: fxls8962af: select IIO_BUFFER & IIO_KFIFO_BUF
iio: adc: ad7266: Fix variable checking bug
iio: xilinx-ams: Don't include ams_ctrl_channels in scan_mask
Here are 2 small staging driver fixes for 6.10-rc6, both for the
vc04_services drivers:
- build fix if CONFIG_DEBUGFS was not set
- initialization check fix that was much reported.
Both of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZoFmKA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk5fgCfaPNg7ikwjRrmgUJbN/e9wx99T90AoL+/iJws
4xL+J3dALmGWTPBqBnNA
=pIxW
-----END PGP SIGNATURE-----
Merge tag 'staging-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are two small staging driver fixes for 6.10-rc6, both for the
vc04_services drivers:
- build fix if CONFIG_DEBUGFS was not set
- initialization check fix that was much reported.
Both of these have been in linux-next this week with no reported
issues"
* tag 'staging-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vchiq_debugfs: Fix build if CONFIG_DEBUG_FS is not set
staging: vc04_services: vchiq_arm: Fix initialisation check
