IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
In current kernels, small allocations never actually fail so this
patch shouldn't affect runtime.
Originally this error handling code written with the idea that if
the "serial->tiocmget" allocation failed, then we would continue
operating instead of bailing out early. But in later years we added
an unchecked dereference on the next line.
serial->tiocmget->serial_state_notification = kzalloc();
^^^^^^^^^^^^^^^^^^
Since these allocations are never going fail in real life, this is
mostly a philosophical debate, but I think bailing out early is the
correct behavior that the user would want. And generally it's safer to
bail as soon an error happens.
Fixes: af0de1303c4e ("usb: hso: obey DMA rules in tiocmget")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's not a good idea to append the frag skb to a skb's frag_list if
the frag_list already has skbs from elsewhere, such as this skb was
created by pskb_copy() where the frag_list was cloned (all the skbs
in it were skb_get'ed) and shared by multiple skbs.
However, the new appended frag skb should have been only seen by the
current skb. Otherwise, it will cause use after free crashes as this
appended frag skb are seen by multiple skbs but it only got skb_get
called once.
The same thing happens with a skb updated by pskb_may_pull() with a
skb_cloned skb. Li Shuang has reported quite a few crashes caused
by this when doing testing over macvlan devices:
[] kernel BUG at net/core/skbuff.c:1970!
[] Call Trace:
[] skb_clone+0x4d/0xb0
[] macvlan_broadcast+0xd8/0x160 [macvlan]
[] macvlan_process_broadcast+0x148/0x150 [macvlan]
[] process_one_work+0x1a7/0x360
[] worker_thread+0x30/0x390
[] kernel BUG at mm/usercopy.c:102!
[] Call Trace:
[] __check_heap_object+0xd3/0x100
[] __check_object_size+0xff/0x16b
[] simple_copy_to_iter+0x1c/0x30
[] __skb_datagram_iter+0x7d/0x310
[] __skb_datagram_iter+0x2a5/0x310
[] skb_copy_datagram_iter+0x3b/0x90
[] tipc_recvmsg+0x14a/0x3a0 [tipc]
[] ____sys_recvmsg+0x91/0x150
[] ___sys_recvmsg+0x7b/0xc0
[] kernel BUG at mm/slub.c:305!
[] Call Trace:
[] <IRQ>
[] kmem_cache_free+0x3ff/0x400
[] __netif_receive_skb_core+0x12c/0xc40
[] ? kmem_cache_alloc+0x12e/0x270
[] netif_receive_skb_internal+0x3d/0xb0
[] ? get_rx_page_info+0x8e/0xa0 [be2net]
[] be_poll+0x6ef/0xd00 [be2net]
[] ? irq_exit+0x4f/0x100
[] net_rx_action+0x149/0x3b0
...
This patch is to fix it by linearizing the head skb if it has frag_list
set in tipc_buf_append(). Note that we choose to do this before calling
skb_unshare(), as __skb_linearize() will avoid skb_copy(). Also, we can
not just drop the frag_list either as the early time.
Fixes: 45c8b7b175ce ("tipc: allow non-linear first fragment buffer")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin says:
====================
ix packet stuck problem for lockless qdisc
This patchset fixes the packet stuck problem mentioned in [1].
Patch 1: Add STATE_MISSED flag to fix packet stuck problem.
Patch 2: Fix a tx_action rescheduling problem after STATE_MISSED
flag is added in patch 1.
Patch 3: Fix the significantly higher CPU consumption problem when
multiple threads are competing on a saturated outgoing
device.
V8: Change function name as suggested by Jakub and fix some typo
in patch 3, adjust commit log in patch 2, and add Acked-by
from Jakub.
V7: Fix netif_tx_wake_queue() data race noted by Jakub.
V6: Some performance optimization in patch 1 suggested by Jakub
and drop NET_XMIT_DROP checking in patch 3.
V5: add patch 3 to fix the problem reported by Michal Kubecek.
V4: Change STATE_NEED_RESCHEDULE to STATE_MISSED and add patch 2.
[1]. https://lkml.org/lkml/2019/10/9/42
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The netdev qeueue might be stopped when byte queue limit has
reached or tx hw ring is full, net_tx_action() may still be
rescheduled if STATE_MISSED is set, which consumes unnecessary
cpu without dequeuing and transmiting any skb because the
netdev queue is stopped, see qdisc_run_end().
This patch fixes it by checking the netdev queue state before
calling qdisc_run() and clearing STATE_MISSED if netdev queue is
stopped during qdisc_run(), the net_tx_action() is rescheduled
again when netdev qeueue is restarted, see netif_tx_wake_queue().
As there is time window between netif_xmit_frozen_or_stopped()
checking and STATE_MISSED clearing, between which STATE_MISSED
may set by net_tx_action() scheduled by netif_tx_wake_queue(),
so set the STATE_MISSED again if netdev queue is restarted.
Fixes: 6b3ba9146fe6 ("net: sched: allow qdiscs to handle locking")
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently qdisc_run() checks the STATE_DEACTIVATED of lockless
qdisc before calling __qdisc_run(), which ultimately clear the
STATE_MISSED when all the skb is dequeued. If STATE_DEACTIVATED
is set before clearing STATE_MISSED, there may be rescheduling
of net_tx_action() at the end of qdisc_run_end(), see below:
CPU0(net_tx_atcion) CPU1(__dev_xmit_skb) CPU2(dev_deactivate)
. . .
. set STATE_MISSED .
. __netif_schedule() .
. . set STATE_DEACTIVATED
. . qdisc_reset()
. . .
.<--------------- . synchronize_net()
clear __QDISC_STATE_SCHED | . .
. | . .
. | . some_qdisc_is_busy()
. | . return *false*
. | . .
test STATE_DEACTIVATED | . .
__qdisc_run() *not* called | . .
. | . .
test STATE_MISS | . .
__netif_schedule()--------| . .
. . .
. . .
__qdisc_run() is not called by net_tx_atcion() in CPU0 because
CPU2 has set STATE_DEACTIVATED flag during dev_deactivate(), and
STATE_MISSED is only cleared in __qdisc_run(), __netif_schedule
is called at the end of qdisc_run_end(), causing tx action
rescheduling problem.
qdisc_run() called by net_tx_action() runs in the softirq context,
which should has the same semantic as the qdisc_run() called by
__dev_xmit_skb() protected by rcu_read_lock_bh(). And there is a
synchronize_net() between STATE_DEACTIVATED flag being set and
qdisc_reset()/some_qdisc_is_busy in dev_deactivate(), we can safely
bail out for the deactived lockless qdisc in net_tx_action(), and
qdisc_reset() will reset all skb not dequeued yet.
So add the rcu_read_lock() explicitly to protect the qdisc_run()
and do the STATE_DEACTIVATED checking in net_tx_action() before
calling qdisc_run_begin(). Another option is to do the checking in
the qdisc_run_end(), but it will add unnecessary overhead for
non-tx_action case, because __dev_queue_xmit() will not see qdisc
with STATE_DEACTIVATED after synchronize_net(), the qdisc with
STATE_DEACTIVATED can only be seen by net_tx_action() because of
__netif_schedule().
The STATE_DEACTIVATED checking in qdisc_run() is to avoid race
between net_tx_action() and qdisc_reset(), see:
commit d518d2ed8640 ("net/sched: fix race between deactivation
and dequeue for NOLOCK qdisc"). As the bailout added above for
deactived lockless qdisc in net_tx_action() provides better
protection for the race without calling qdisc_run() at all, so
remove the STATE_DEACTIVATED checking in qdisc_run().
After qdisc_reset(), there is no skb in qdisc to be dequeued, so
clear the STATE_MISSED in dev_reset_queue() too.
Fixes: 6b3ba9146fe6 ("net: sched: allow qdiscs to handle locking")
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
V8: Clearing STATE_MISSED before calling __netif_schedule() has
avoid the endless rescheduling problem, but there may still
be a unnecessary rescheduling, so adjust the commit log.
Signed-off-by: David S. Miller <davem@davemloft.net>
Lockless qdisc has below concurrent problem:
cpu0 cpu1
. .
q->enqueue .
. .
qdisc_run_begin() .
. .
dequeue_skb() .
. .
sch_direct_xmit() .
. .
. q->enqueue
. qdisc_run_begin()
. return and do nothing
. .
qdisc_run_end() .
cpu1 enqueue a skb without calling __qdisc_run() because cpu0
has not released the lock yet and spin_trylock() return false
for cpu1 in qdisc_run_begin(), and cpu0 do not see the skb
enqueued by cpu1 when calling dequeue_skb() because cpu1 may
enqueue the skb after cpu0 calling dequeue_skb() and before
cpu0 calling qdisc_run_end().
Lockless qdisc has below another concurrent problem when
tx_action is involved:
cpu0(serving tx_action) cpu1 cpu2
. . .
. q->enqueue .
. qdisc_run_begin() .
. dequeue_skb() .
. . q->enqueue
. . .
. sch_direct_xmit() .
. . qdisc_run_begin()
. . return and do nothing
. . .
clear __QDISC_STATE_SCHED . .
qdisc_run_begin() . .
return and do nothing . .
. . .
. qdisc_run_end() .
This patch fixes the above data race by:
1. If the first spin_trylock() return false and STATE_MISSED is
not set, set STATE_MISSED and retry another spin_trylock() in
case other CPU may not see STATE_MISSED after it releases the
lock.
2. reschedule if STATE_MISSED is set after the lock is released
at the end of qdisc_run_end().
For tx_action case, STATE_MISSED is also set when cpu1 is at the
end if qdisc_run_end(), so tx_action will be rescheduled again
to dequeue the skb enqueued by cpu2.
Clear STATE_MISSED before retrying a dequeuing when dequeuing
returns NULL in order to reduce the overhead of the second
spin_trylock() and __netif_schedule() calling.
Also clear the STATE_MISSED before calling __netif_schedule()
at the end of qdisc_run_end() to avoid doing another round of
dequeuing in the pfifo_fast_dequeue().
The performance impact of this patch, tested using pktgen and
dummy netdev with pfifo_fast qdisc attached:
threads without+this_patch with+this_patch delta
1 2.61Mpps 2.60Mpps -0.3%
2 3.97Mpps 3.82Mpps -3.7%
4 5.62Mpps 5.59Mpps -0.5%
8 2.78Mpps 2.77Mpps -0.3%
16 2.22Mpps 2.22Mpps -0.0%
Fixes: 6b3ba9146fe6 ("net: sched: allow qdiscs to handle locking")
Acked-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In tls_sw_splice_read, checkout MSG_* is inappropriate, should use
SPLICE_*, update tls_wait_data to accept nonblock arguments instead
of flags for recvmsg and splice.
Fixes: c46234ebb4d1 ("tls: RX path for ktls")
Signed-off-by: Jim Ma <majinjing3@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 6bf24dc0cc0cc43b29ba344b66d78590e687e046.
Above fix is not correct and caused memory leak issue.
Fixes: 6bf24dc0cc0c ("net:tipc: Fix a double free in tipc_sk_mcast_rcv")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Acked-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Remove the flowtable hardware refresh state, fall back to the
existing hardware pending state instead, from Roi Dayan.
2) Fix crash in pipapo avx2 lookup when FPU is in used from user
context, from Stefano Brivio.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Offloading conns could fail for multiple reasons and a hw refresh bit is
set to try to reoffload it in next sw packet.
But it could be in some cases and future points that the hw refresh bit
is not set but a refresh could succeed.
Remove the hw refresh bit and do offload refresh if requested.
There won't be a new work entry if a work is already pending
anyway as there is the hw pending bit.
Fixes: 8b3646d6e0c4 ("net/sched: act_ct: Support refreshing the flow table entries")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We have observed meters working unexpected if traffic is 3+Gbit/s
with multiple connections.
now_ms is not pretected by meter->lock, we may get a negative
long_delta_ms when another cpu updated meter->used, then:
delta_ms = (u32)long_delta_ms;
which will be a large value.
band->bucket += delta_ms * band->rate;
then we get a wrong band->bucket.
OpenVswitch userspace datapath has fixed the same issue[1] some
time ago, and we port the implementation to kernel datapath.
[1] https://patchwork.ozlabs.org/project/openvswitch/patch/20191025114436.9746-1-i.maximets@ovn.org/
Fixes: 96fbc13d7e77 ("openvswitch: Add meter infrastructure")
Signed-off-by: Tao Liu <thomas.liu@ucloud.cn>
Suggested-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case of error, the function devm_platform_ioremap_resource_byname()
returns ERR_PTR() and never returns NULL. The NULL test in the return
value check should be replaced with IS_ERR().
Fixes: b4cd249a8cc0 ("net: korina: Use devres functions")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch maintain the list of active tids and clear all the active
connection resources when DETACH notification comes.
Fixes: a8c16e8ed624f ("crypto/chcr: move nic TLS functionality to drivers/net")
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
'bus->mii_bus' has been allocated with 'devm_mdiobus_alloc_size()' in the
probe function. So it must not be freed explicitly or there will be a
double free.
Remove the incorrect 'mdiobus_free' in the error handling path of the
probe function and in remove function.
Suggested-By: Andrew Lunn <andrew@lunn.ch>
Fixes: 35d2aeac9810 ("phy: mdio-octeon: Use devm_mdiobus_alloc_size()")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
'bus->mii_bus' have been allocated with 'devm_mdiobus_alloc_size()' in the
probe function. So it must not be freed explicitly or there will be a
double free.
Remove the incorrect 'mdiobus_free' in the remove function.
Fixes: 379d7ac7ca31 ("phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses.")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This error path needs to release some memory and call release_sock(sk);
before returning.
Fixes: 6919a8264a32 ("Crypto/chtls: add/delete TLS header in driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Keep all NFC related patches in existing linux-nfc@lists.01.org mailing
list.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The NFC subsystem is orphaned. I am happy to spend some cycles to
review the patches, send pull requests and in general keep the NFC
subsystem running.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Emails to Clément Perrochaud bounce with permanent error "user does not
exist", so remove Clément Perrochaud from NXP-NCI driver maintainers
entry.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAmCbfrsTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCpyVqK+u3vqRUTB/9tORTrJ2x43hVPVVUqR50c4izuKyTi
5q66+P7SBh4n0HHwaZnUBTyGEnC0u2UcdmtHTXswcBP1vSd2+PlP9HNwOAuQP+Ng
uSzJEZ1usmOd8PCpN3WRBaQ8poCRaX2ifwc4s9xnOMUf5mZMx3vkgZgApMz5pScc
IpqM09NdEsMkmGFpfttjPi32tnC2FpK9L3f2B1DzmSC8IaZyawI5jj+l9DKsxFoG
mwlBx1IGqmICvAS5LvZWvypnDmSP652RaHQ2ZCp1oEzLhbCugKKIvyed1C0L0KGC
A7YaAbR/OwMBdrSaWStANzBSFfNTPrXGCfOcKdIaoR8elR47D7qc/02l
=QTJ/
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-5.13-20210512' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2021-05-12
this is a pull request of a single patch for net/master.
The patch is by Norbert Slusarek and it fixes a race condition in the
CAN ISO-TP socket between isotp_bind() and isotp_setsockopt().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If an error occurs after a successful 'pci_ioremap_bar()' call, it must be
undone by a corresponding 'pci_iounmap()' call, as already done in the
remove function.
Fixes: a7e1abad13f3 ("ptp: Add clock driver for the OpenCompute TimeCard.")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This function is called from ethtool_set_rxfh() and "*rss_context"
comes from the user. Add some bounds checking to prevent memory
corruption.
Fixes: 81a4362016e7 ("octeontx2-pf: Add RSS multi group support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joakim Zhang says:
====================
net: fixes for fec driver
Two small fixes for fec driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If MAC address read from nvmem efuse by calling .of_get_mac_address(),
but nvmem efuse is registered later than the driver, then it
return -EPROBE_DEFER value. So modify the driver to support
defer probe when read MAC address from nvmem efuse.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the memory allocated for cbd_base is failed, it should
free the memory allocated for the queues, otherwise it causes
memory leak.
And if the memory allocated for the queues is failed, it can
return error directly.
Fixes: 59d0f7465644 ("net: fec: init multi queue date structure")
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The packetmmap tx ring should only return timestamps if requested via
setsockopt PACKET_TIMESTAMP, as documented. This allows compatibility
with non-timestamp aware user-space code which checks
tp_status == TP_STATUS_AVAILABLE; not expecting additional timestamp
flags to be set in tp_status.
Fixes: b9c32fb27170 ("packet: if hw/sw ts enabled in rx/tx ring, report which ts we got")
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Richard Sanger <rsanger@wand.net.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski pointed out that we need to handle ipv6 extension headers
and to explicitly check for supported tunnel types in
.ndo_features_check().
For ipv6 extension headers, the hardware supports up to 2 ext. headers
and each must be <= 64 bytes. For tunneled packets, the supported
packets are UDP with supported VXLAN and Geneve ports, GRE, and IPIP.
v3: More improvements based on Alexander Duyck's valuable feedback -
Remove the jump lable in bnxt_features_check() and restructure it
so that the TCP/UDP is check is consolidated in bnxt_exthdr_check().
v2: Add missing step to check inner ipv6 header for UDP and GRE tunnels.
Check TCP/UDP next header after skipping ipv6 ext headers for
non-tunneled packets and for inner ipv6.
(Both feedback from Alexander Duyck)
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Fixes: 1698d600b361 ("bnxt_en: Implement .ndo_features_check().")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the owing socket is shutting down - e.g. the sock reference
count already dropped to 0 and only sk_wmem_alloc is keeping
the sock alive, skb_orphan_partial() becomes a no-op.
When forwarding packets over veth with GRO enabled, the above
causes refcount errors.
This change addresses the issue with a plain skb_orphan() call
in the critical scenario.
Fixes: 9adc89af724f ("net: let skb_orphan_partial wake-up waiters.")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A race condition was found in isotp_setsockopt() which allows to
change socket options after the socket was bound.
For the specific case of SF_BROADCAST support, this might lead to possible
use-after-free because can_rx_unregister() is not called.
Checking for the flag under the socket lock in isotp_bind() and taking
the lock in isotp_setsockopt() fixes the issue.
Fixes: 921ca574cd38 ("can: isotp: add SF_BROADCAST support for functional addressing")
Link: https://lore.kernel.org/r/trinity-e6ae9efa-9afb-4326-84c0-f3609b9b8168-1620773528307@3c-app-gmx-bs06
Reported-by: Norbert Slusarek <nslusarek@gmx.net>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Norbert Slusarek <nslusarek@gmx.net>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
IPA configuration data includes an array of memory region
descriptors. That was a fixed-size array at one time, but
at some point we started defining it such that it was only
as big as required for a given platform. The actual number
of entries in the array is recorded in the configuration data
along with the array.
A loop in ipa_mem_config() still assumes the array has entries
for all defined memory region IDs. As a result, this loop can
go past the end of the actual array and attempt to write
"canary" values based on nonsensical data.
Fix this, by stashing the number of entries in the array, and
using that rather than IPA_MEM_COUNT in the initialization loop
found in ipa_mem_config().
The only remaining use of IPA_MEM_COUNT is in a validation check
to ensure configuration data doesn't have too many entries.
That's fine for now.
Fixes: 3128aae8c439a ("net: ipa: redefine struct ipa_mem_data")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When IONIC=y and PTP_1588_CLOCK=m were set in the .config file
the driver link failed with undefined references.
We add the dependancy
depends on PTP_1588_CLOCK || !PTP_1588_CLOCK
to clear this up.
If PTP_1588_CLOCK=m, the depends limits IONIC to =m (or disabled).
If PTP_1588_CLOCK is disabled, IONIC can be any of y/m/n.
Fixes: 61db421da31b ("ionic: link in the new hw timestamp code")
Reported-by: kernel test robot <lkp@intel.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Allen Hubbe <allenbh@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maxim reported several issues when forcing a TCP transparent proxy
to use the MPTCP protocol for the inbound connections. He also
provided a clean reproducer.
The problem boils down to 'mptcp_frag_can_collapse_to()' assuming
that only MPTCP will use the given page_frag.
If others - e.g. the plain TCP protocol - allocate page fragments,
we can end-up re-using already allocated memory for mptcp_data_frag.
Fix the issue ensuring that the to-be-expanded data fragment is
located at the current page frag end.
v1 -> v2:
- added missing fixes tag (Mat)
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/178
Reported-and-tested-by: Maxim Galaganov <max@internet.ru>
Fixes: 18b683bff89d ("mptcp: queue data for mptcp level retransmission")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2021-05-11
The following pull-request contains BPF updates for your *net* tree.
We've added 13 non-merge commits during the last 8 day(s) which contain
a total of 21 files changed, 817 insertions(+), 382 deletions(-).
The main changes are:
1) Fix multiple ringbuf bugs in particular to prevent writable mmap of
read-only pages, from Andrii Nakryiko & Thadeu Lima de Souza Cascardo.
2) Fix verifier alu32 known-const subregister bound tracking for bitwise
operations and/or/xor, from Daniel Borkmann.
3) Reject trampoline attachment for functions with variable arguments,
and also add a deny list of other forbidden functions, from Jiri Olsa.
4) Fix nested bpf_bprintf_prepare() calls used by various helpers by
switching to per-CPU buffers, from Florent Revest.
5) Fix kernel compilation with BTF debug info on ppc64 due to pahole
missing TCP-CC functions like cubictcp_init, from Martin KaFai Lau.
6) Add a kconfig entry to provide an option to disallow unprivileged
BPF by default, from Daniel Borkmann.
7) Fix libbpf compilation for older libelf when GELF_ST_VISIBILITY()
macro is not available, from Arnaldo Carvalho de Melo.
8) Migrate test_tc_redirect to test_progs framework as prep work
for upcoming skb_change_head() fix & selftest, from Jussi Maki.
9) Fix a libbpf segfault in add_dummy_ksym_var() if BTF is not
present, from Ian Rogers.
10) Fix tx_only micro-benchmark in xdpsock BPF sample with proper frame
size, from Magnus Karlsson.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Mathy Vanhoef (New York University Abu Dhabi), and this contains the
fixes developed for mac80211 and specifically Qualcomm drivers, I'm
sending this together (as agreed with Kalle) to have just a single
set of patches for now. We don't know about other vendors though.
More details in the patch posting:
https://lore.kernel.org/r/20210511180259.159598-1-johannes@sipsolutions.net
-----BEGIN PGP SIGNATURE-----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=cCe3
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-net-2021-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
pull-request: mac80211 2021-05-11
So exciting times, for the first pull request for fixes I
have a bunch of security things that have been under embargo
for a while - see more details in the tag below, and at the
patch posting message I linked to.
I organized with Kalle to just have a single set of fixes
for mac80211 and ath10k/ath11k, we don't know about any of
the other vendors (the mac80211 + already released firmware
is sufficient to fix iwlwifi.)
Please pull and let me know if there's any problem.
Several security issues in the 802.11 implementations were found by
Mathy Vanhoef (New York University Abu Dhabi), and this contains the
fixes developed for mac80211 and specifically Qualcomm drivers, I'm
sending this together (as agreed with Kalle) to have just a single
set of patches for now. We don't know about other vendors though.
More details in the patch posting:
https://lore.kernel.org/r/20210511180259.159598-1-johannes@sipsolutions.net
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Both get and set WoL will check device_can_wakeup(), if MAC supports PMT, it
will set device wakeup capability. After commit 1d8e5b0f3f2c ("net: stmmac:
Support WOL with phy"), device wakeup capability will be overwrite in
stmmac_init_phy() according to phy's Wol feature. If phy doesn't support WoL,
then MAC will lose wakeup capability. To fix this issue, only overwrite device
wakeup capability when MAC doesn't support PMT.
For STMMAC now driver checks MAC's WoL capability if MAC supports PMT, if
not support, driver will check PHY's WoL capability.
Fixes: 1d8e5b0f3f2c ("net: stmmac: Support WOL with phy")
Reviewed-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During the discussion in [0]. It was pointed out that static functions
in ppc64 is prefixed with ".". For example, the 'readelf -s vmlinux.ppc':
89326: c000000001383280 24 NOTYPE LOCAL DEFAULT 31 cubictcp_init
89327: c000000000c97c50 168 FUNC LOCAL DEFAULT 2 .cubictcp_init
The one with FUNC type is ".cubictcp_init" instead of "cubictcp_init".
The "." seems to be done by arch/powerpc/include/asm/ppc_asm.h.
This caused that pahole cannot generate the BTF for these tcp-cc kernel
functions because pahole only captures the FUNC type and "cubictcp_init"
is not. It then failed the kernel compilation in ppc64.
This behavior is only reported in ppc64 so far. I tried arm64, s390,
and sparc64 and did not observe this "." prefix and NOTYPE behavior.
Since the kfunc call is only supported in the x86_64 and x86_32 JIT,
this patch limits those tcp-cc functions to x86 only to avoid unnecessary
compilation issue in other ARCHs. In the future, we can examine if it
is better to change all those functions from static to extern.
[0] https://lore.kernel.org/bpf/4e051459-8532-7b61-c815-f3435767f8a0@kernel.org/
Fixes: e78aea8b2170 ("bpf: tcp: Put some tcp cong functions in allowlist for bpf-tcp-cc")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Michal Suchánek <msuchanek@suse.de>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/bpf/20210508005011.3863757-1-kafai@fb.com
As discussed in [0], this ports test_tc_redirect.sh to the test_progs
framework and removes the old test.
This makes it more in line with rest of the tests and makes it possible
to run this test case with vmtest.sh and under the bpf CI.
The upcoming skb_change_head() helper fix in [0] is depending on it and
extending the test case to redirect a packet from L3 device to veth.
[0] https://lore.kernel.org/bpf/20210427135550.807355-1-joamaki@gmail.com
Signed-off-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210505085925.783985-1-joamaki@gmail.com
The bpf_seq_printf, bpf_trace_printk and bpf_snprintf helpers share one
per-cpu buffer that they use to store temporary data (arguments to
bprintf). They "get" that buffer with try_get_fmt_tmp_buf and "put" it
by the end of their scope with bpf_bprintf_cleanup.
If one of these helpers gets called within the scope of one of these
helpers, for example: a first bpf program gets called, uses
bpf_trace_printk which calls raw_spin_lock_irqsave which is traced by
another bpf program that calls bpf_snprintf, then the second "get"
fails. Essentially, these helpers are not re-entrant. They would return
-EBUSY and print a warning message once.
This patch triples the number of bprintf buffers to allow three levels
of nesting. This is very similar to what was done for tracepoints in
"9594dc3c7e7 bpf: fix nested bpf tracepoints with per-cpu data"
Fixes: d9c9e4db186a ("bpf: Factorize bpf_trace_printk and bpf_seq_printf")
Reported-by: syzbot+63122d0bc347f18c1884@syzkaller.appspotmail.com
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210511081054.2125874-1-revest@chromium.org
The recursion check in __bpf_prog_enter and __bpf_prog_exit
leaves some (not inlined) functions unprotected:
In __bpf_prog_enter:
- migrate_disable is called before prog->active is checked
In __bpf_prog_exit:
- migrate_enable,rcu_read_unlock_strict are called after
prog->active is decreased
When attaching trampoline to them we get panic like:
traps: PANIC: double fault, error_code: 0x0
double fault: 0000 [#1] SMP PTI
RIP: 0010:__bpf_prog_enter+0x4/0x50
...
Call Trace:
<IRQ>
bpf_trampoline_6442466513_0+0x18/0x1000
migrate_disable+0x5/0x50
__bpf_prog_enter+0x9/0x50
bpf_trampoline_6442466513_0+0x18/0x1000
migrate_disable+0x5/0x50
__bpf_prog_enter+0x9/0x50
bpf_trampoline_6442466513_0+0x18/0x1000
migrate_disable+0x5/0x50
__bpf_prog_enter+0x9/0x50
bpf_trampoline_6442466513_0+0x18/0x1000
migrate_disable+0x5/0x50
...
Fixing this by adding deny list of btf ids for tracing
programs and checking btf id during program verification.
Adding above functions to this list.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210429114712.43783-1-jolsa@kernel.org
Add a kconfig knob which allows for unprivileged bpf to be disabled by default.
If set, the knob sets /proc/sys/kernel/unprivileged_bpf_disabled to value of 2.
This still allows a transition of 2 -> {0,1} through an admin. Similarly,
this also still keeps 1 -> {1} behavior intact, so that once set to permanently
disabled, it cannot be undone aside from a reboot.
We've also added extra2 with max of 2 for the procfs handler, so that an admin
still has a chance to toggle between 0 <-> 2.
Either way, as an additional alternative, applications can make use of CAP_BPF
that we added a while ago.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/74ec548079189e4e4dffaeb42b8987bb3c852eee.1620765074.git.daniel@iogearbox.net
Right now, all core BPF related options are scattered in different Kconfig
locations mainly due to historic reasons. Moving forward, lets add a proper
subsystem entry under ...
General setup --->
BPF subsystem --->
... in order to have all knobs in a single location and thus ease BPF related
configuration. Networking related bits such as sockmap are out of scope for
the general setup and therefore better suited to remain in net/Kconfig.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/f23f58765a4d59244ebd8037da7b6a6b2fb58446.1620765074.git.daniel@iogearbox.net
Currently the fragment cache setup during peer assoc is
cleared only during peer delete. In case a key reinstallation
happens with the same peer, the same fragment cache with old
fragments added before key installation could be clubbed
with fragments received after. This might be exploited
to mix fragments of different data resulting in a proper
unintended reassembled packet to be passed up the stack.
Hence flush the fragment cache on every key installation to prevent
potential attacks (CVE-2020-24587).
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01734-QCAHKSWPL_SILICONZ-1 v2
Cc: stable@vger.kernel.org
Signed-off-by: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20210511200110.218dc777836f.I9af6fc76215a35936c4152552018afb5079c5d8c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In certain scenarios a normal MSDU can be received as an A-MSDU when
the A-MSDU present bit of a QoS header gets flipped during reception.
Since this bit is unauthenticated, the hardware crypto engine can pass
the frame to the driver without any error indication.
This could result in processing unintended subframes collected in the
A-MSDU list. Hence, validate A-MSDU list by checking if the first frame
has a valid subframe header.
Comparing the non-aggregated MSDU and an A-MSDU, the fields of the first
subframe DA matches the LLC/SNAP header fields of a normal MSDU.
In order to avoid processing such frames, add a validation to
filter such A-MSDU frames where the first subframe header DA matches
with the LLC/SNAP header pattern.
Tested-on: QCA9984 hw1.0 PCI 10.4-3.10-00047
Cc: stable@vger.kernel.org
Signed-off-by: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20210511200110.e6f5eb7b9847.I38a77ae26096862527a5eab73caebd7346af8b66@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
TKIP Michael MIC was not verified properly for PCIe cases since the
validation steps in ieee80211_rx_h_michael_mic_verify() in mac80211 did
not get fully executed due to unexpected flag values in
ieee80211_rx_status.
Fix this by setting the flags property to meet mac80211 expectations for
performing Michael MIC validation there. This fixes CVE-2020-26141. It
does the same as ath10k_htt_rx_proc_rx_ind_hl() for SDIO which passed
MIC verification case. This applies only to QCA6174/QCA9377 PCIe.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1
Cc: stable@vger.kernel.org
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20210511200110.c3f1d42c6746.I795593fcaae941c471425b8c7d5f7bb185d29142@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
