IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Pull networking fixes from David Miller:
1) Encap offset calculation is incorrect in esp6, from Sabrina Dubroca.
2) Better parameter validation in pfkey_dump(), from Mark Salyzyn.
3) Fix several clang issues on powerpc in selftests, from Tanner Love.
4) cmsghdr_from_user_compat_to_kern() uses the wrong length, from Al
Viro.
5) Out of bounds access in mlx5e driver, from Raed Salem.
6) Fix transfer buffer memleak in lan78xx, from Johan Havold.
7) RCU fixups in rhashtable, from Herbert Xu.
8) Fix ipv6 nexthop refcnt leak, from Xiyu Yang.
9) vxlan FDB dump must be done under RCU, from Ido Schimmel.
10) Fix use after free in mlxsw, from Ido Schimmel.
11) Fix map leak in HASH_OF_MAPS bpf code, from Andrii Nakryiko.
12) Fix bug in mac80211 Tx ack status reporting, from Vasanthakumar
Thiagarajan.
13) Fix memory leaks in IPV6_ADDRFORM code, from Cong Wang.
14) Fix bpf program reference count leaks in mlx5 during
mlx5e_alloc_rq(), from Xin Xiong.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (86 commits)
vxlan: fix memleak of fdb
rds: Prevent kernel-infoleak in rds_notify_queue_get()
net/sched: The error lable position is corrected in ct_init_module
net/mlx5e: fix bpf_prog reference count leaks in mlx5e_alloc_rq
net/mlx5e: E-Switch, Specify flow_source for rule with no in_port
net/mlx5e: E-Switch, Add misc bit when misc fields changed for mirroring
net/mlx5e: CT: Support restore ipv6 tunnel
net: gemini: Fix missing clk_disable_unprepare() in error path of gemini_ethernet_port_probe()
ionic: unlock queue mutex in error path
atm: fix atm_dev refcnt leaks in atmtcp_remove_persistent
net: ethernet: mtk_eth_soc: fix MTU warnings
net: nixge: fix potential memory leak in nixge_probe()
devlink: ignore -EOPNOTSUPP errors on dumpit
rxrpc: Fix race between recvmsg and sendmsg on immediate call failure
MAINTAINERS: Replace Thor Thayer as Altera Triple Speed Ethernet maintainer
selftests/bpf: fix netdevsim trap_flow_action_cookie read
ipv6: fix memory leaks on IPV6_ADDRFORM path
net/bpfilter: Initialize pos in __bpfilter_process_sockopt
igb: reinit_locked() should be called with rtnl_lock
e1000e: continue to init PHY even when failed to disable ULP
...
kernel test robot says:
net/mptcp/syncookies.c: In function 'mptcp_join_cookie_init':
include/linux/kernel.h:47:38: warning: division by zero [-Wdiv-by-zero]
#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]) + __must_be_array(arr))
I forgot that spinock_t size is 0 on UP, so ARRAY_SIZE cannot be used.
Fixes: 9466a1cceb ("mptcp: enable JOIN requests even if cookies are in use")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
It turns out that on commit 41d707b733 ("fib: fix fib_rules_ops
indirect calls wrappers") I forgot to include the case when
CONFIG_IP_MULTIPLE_TABLES is not set.
Fixes: 41d707b733 ("fib: fix fib_rules_ops indirect calls wrappers")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Brian Vazquez <brianvv@google.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes these errors:
net/ipv4/syncookies.c: In function 'tcp_get_cookie_sock':
net/ipv4/syncookies.c:216:19: error: 'struct tcp_request_sock' has no
member named 'drop_req'
216 | if (tcp_rsk(req)->drop_req) {
| ^~
net/ipv4/syncookies.c: In function 'cookie_tcp_reqsk_alloc':
net/ipv4/syncookies.c:289:27: warning: unused variable 'treq'
[-Wunused-variable]
289 | struct tcp_request_sock *treq;
| ^~~~
make[3]: *** [scripts/Makefile.build:280: net/ipv4/syncookies.o] Error 1
make[3]: *** Waiting for unfinished jobs....
Fixes: 9466a1cceb ("mptcp: enable JOIN requests even if cookies are in use")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
* code cleanups and fixups as usual
* AQL & internal TXQ improvements from Felix
* some mesh 802.1X support bits
* some injection improvements from Mathy of KRACK
fame, so we'll see what this results in ;-)
* some more initial S1G supports bits, this time
(some of?) the userspace APIs
-----BEGIN PGP SIGNATURE-----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=FR6T
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-davem-2020-07-31' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
We have a number of changes
* code cleanups and fixups as usual
* AQL & internal TXQ improvements from Felix
* some mesh 802.1X support bits
* some injection improvements from Mathy of KRACK
fame, so we'll see what this results in ;-)
* some more initial S1G supports bits, this time
(some of?) the userspace APIs
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
netdev protodown is a mechanism that allows protocols to
hold an interface down. It was initially introduced in
the kernel to hold links down by a multihoming protocol.
There was also an attempt to introduce protodown
reason at the time but was rejected. protodown and protodown reason
is supported by almost every switching and routing platform.
It was ok for a while to live without a protodown reason.
But, its become more critical now given more than
one protocol may need to keep a link down on a system
at the same time. eg: vrrp peer node, port security,
multihoming protocol. Its common for Network operators and
protocol developers to look for such a reason on a networking
box (Its also known as errDisable by most networking operators)
This patch adds support for link protodown reason
attribute. There are two ways to maintain protodown
reasons.
(a) enumerate every possible reason code in kernel
- A protocol developer has to make a request and
have that appear in a certain kernel version
(b) provide the bits in the kernel, and allow user-space
(sysadmin or NOS distributions) to manage the bit-to-reasonname
map.
- This makes extending reason codes easier (kind of like
the iproute2 table to vrf-name map /etc/iproute2/rt_tables.d/)
This patch takes approach (b).
a few things about the patch:
- It treats the protodown reason bits as counter to indicate
active protodown users
- Since protodown attribute is already an exposed UAPI,
the reason is not enforced on a protodown set. Its a no-op
if not used.
the patch follows the below algorithm:
- presence of reason bits set indicates protodown
is in use
- user can set protodown and protodown reason in a
single or multiple setlink operations
- setlink operation to clear protodown, will return -EBUSY
if there are active protodown reason bits
- reason is not included in link dumps if not used
example with patched iproute2:
$cat /etc/iproute2/protodown_reasons.d/r.conf
0 mlag
1 evpn
2 vrrp
3 psecurity
$ip link set dev vxlan0 protodown on protodown_reason vrrp on
$ip link set dev vxlan0 protodown_reason mlag on
$ip link show
14: vxlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
DEFAULT group default qlen 1000
link/ether f6:06:be:17:91:e7 brd ff:ff:ff:ff:ff:ff protodown on <mlag,vrrp>
$ip link set dev vxlan0 protodown_reason mlag off
$ip link set dev vxlan0 protodown off protodown_reason vrrp off
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2020-07-31
The following pull-request contains BPF updates for your *net* tree.
We've added 5 non-merge commits during the last 21 day(s) which contain
a total of 5 files changed, 126 insertions(+), 18 deletions(-).
The main changes are:
1) Fix a map element leak in HASH_OF_MAPS map type, from Andrii Nakryiko.
2) Fix a NULL pointer dereference in __btf_resolve_helper_id() when no
btf_vmlinux is available, from Peilin Ye.
3) Init pos variable in __bpfilter_process_sockopt(), from Christoph Hellwig.
4) Fix a cgroup sockopt verifier test by specifying expected attach type,
from Jean-Philippe Brucker.
Note that when net gets merged into net-next later on, there is a small
merge conflict in kernel/bpf/btf.c between commit 5b801dfb7f ("bpf: Fix
NULL pointer dereference in __btf_resolve_helper_id()") from the bpf tree
and commit 138b9a0511 ("bpf: Remove btf_id helpers resolving") from the
net-next tree.
Resolve as follows: remove the old hunk with the __btf_resolve_helper_id()
function. Change the btf_resolve_helper_id() so it actually tests for a
NULL btf_vmlinux and bails out:
int btf_resolve_helper_id(struct bpf_verifier_log *log,
const struct bpf_func_proto *fn, int arg)
{
int id;
if (fn->arg_type[arg] != ARG_PTR_TO_BTF_ID || !btf_vmlinux)
return -EINVAL;
id = fn->btf_id[arg];
if (!id || id > btf_vmlinux->nr_types)
return -EINVAL;
return id;
}
Let me know if you run into any others issues (CC'ing Jiri Olsa so he's in
the loop with regards to merge conflict resolution).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net): ipsec 2020-07-31
1) Fix policy matching with mark and mask on userspace interfaces.
From Xin Long.
2) Several fixes for the new ESP in TCP encapsulation.
From Sabrina Dubroca.
3) Fix crash when the hold queue is used. The assumption that
xdst->path and dst->child are not a NULL pointer only if dst->xfrm
is not a NULL pointer is true with the exception of using the
hold queue. Fix this by checking for hold queue usage before
dereferencing xdst->path or dst->child.
4) Validate pfkey_dump parameter before sending them.
From Mark Salyzyn.
5) Fix the location of the transport header with ESP in UDPv6
encapsulation. From Sabrina Dubroca.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This change adds TCP_NLA_EDT to SCM_TIMESTAMPING_OPT_STATS that reports
the earliest departure time(EDT) of the timestamped skb. By tracking EDT
values of the skb from different timestamps, we can observe when and how
much the value changed. This allows to measure the precise delay
injected on the sender host e.g. by a bpf-base throttler.
Signed-off-by: Yousuk Seung <ysseung@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
JOIN requests do not work in syncookie mode -- for HMAC validation, the
peers nonce and the mptcp token (to obtain the desired connection socket
the join is for) are required, but this information is only present in the
initial syn.
So either we need to drop all JOIN requests once a listening socket enters
syncookie mode, or we need to store enough state to reconstruct the request
socket later.
This adds a state table (1024 entries) to store the data present in the
MP_JOIN syn request and the random nonce used for the cookie syn/ack.
When a MP_JOIN ACK passed cookie validation, the table is consulted
to rebuild the request socket from it.
An alternate approach would be to "cancel" syn-cookie mode and force
MP_JOIN to always use a syn queue entry.
However, doing so brings the backlog over the configured queue limit.
v2: use req->syncookie, not (removed) want_cookie arg
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If SYN packet contains MP_CAPABLE option, keep it enabled.
Syncokie validation and cookie-based socket creation is changed to
instantiate an mptcp request sockets if the ACK contains an MPTCP
connection request.
Rather than extend both cookie_v4/6_check, add a common helper to create
the (mp)tcp request socket.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Will be used to initialize the mptcp request socket when a MP_CAPABLE
request was handled in syncookie mode, i.e. when a TCP ACK containing a
MP_CAPABLE option is a valid syncookie value.
Normally (non-cookie case), MPTCP will generate a unique 32 bit connection
ID and stores it in the MPTCP token storage to be able to retrieve the
mptcp socket for subflow joining.
In syncookie case, we do not want to store any state, so just generate the
unique ID and use it in the reply.
This means there is a small window where another connection could generate
the same token.
When Cookie ACK comes back, we check that the token has not been registered
in the mean time. If it was, the connection needs to fall back to TCP.
Changes in v2:
- use req->syncookie instead of passing 'want_cookie' arg to ->init_req()
(Eric Dumazet)
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syncookie code path needs to create an mptcp request sock.
Prepare for this and add mptcp prefix plus needed export of ops struct.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When syncookie support is added, we will need to add a variant of
subflow_init_req() helper. It will do almost same thing except
that it will not compute/add a token to the mptcp token tree.
To avoid excess copy&paste, this commit splits away part of the
code into a new helper, __subflow_init_req, that can then be re-used
from the 'no insert' function added in a followup change.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Once syncookie support is added, no state will be stored anymore when the
syn/ack is generated in syncookie mode.
When the ACK comes back, the generated key will be taken from the TCP ACK,
the token is re-generated and inserted into the token tree.
This means we can't retry with a new key when the token is already taken
in the syncookie case.
Therefore, move the retry logic to the caller to prepare for syncookie
support in mptcp.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nowadays output function has a 'synack_type' argument that tells us when
the syn/ack is emitted via syncookies.
The request already tells us when timestamps are supported, so check
both to detect special timestamp for tcp option encoding is needed.
We could remove cookie_ts altogether, but a followup patch would
otherwise need to adjust function signatures to pass 'want_cookie' to
mptcp core.
This way, the 'existing' bit can be used.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
rds_notify_queue_get() is potentially copying uninitialized kernel stack
memory to userspace since the compiler may leave a 4-byte hole at the end
of `cmsg`.
In 2016 we tried to fix this issue by doing `= { 0 };` on `cmsg`, which
unfortunately does not always initialize that 4-byte hole. Fix it by using
memset() instead.
Cc: stable@vger.kernel.org
Fixes: f037590fff ("rds: fix a leak of kernel memory")
Fixes: bdbe6fbc6a ("RDS: recv.c")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make use of the struct_size() helper, in multiple places, instead
of an open-coded version in order to avoid any potential type
mistakes and protect against potential integer overflows.
Also, remove unnecessary object identifier size.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert to %pM instead of using custom code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we don't care about vlan depth, we could pass NULL instead of the
address of a unused local variable to skb_network_protocol() as a param.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Exchange the positions of the err_tbl_init and err_register labels in
ct_init_module function.
Fixes: c34b961a24 ("net/sched: act_ct: Create nf flow table per zone")
Signed-off-by: liujian <liujian56@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/bluetooth/sco.c: In function ‘sco_sock_setsockopt’:
net/bluetooth/sco.c:862:3: error: cannot convert to a pointer type
862 | if (get_user(opt, (u32 __user *)optval)) {
| ^~
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hedberg says:
====================
pull request: bluetooth-next 2020-07-31
Here's the main bluetooth-next pull request for 5.9:
- Fix firmware filenames for Marvell chipsets
- Several suspend-related fixes
- Addedd mgmt commands for runtime configuration
- Multiple fixes for Qualcomm-based controllers
- Add new monitoring feature for mgmt
- Fix handling of legacy cipher (E4) together with security level 4
- Add support for Realtek 8822CE controller
- Fix issues with Chinese controllers using fake VID/PID values
- Multiple other smaller fixes & improvements
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira found that after recent update of xt_IDLETIMER the
iptables-nft tests sometimes show an error.
He tracked this down to the delayed cleanup used by nf_tables core:
del rule (transaction A)
add rule (transaction B)
Its possible that by time transaction B (both in same netns) runs,
the xt target destructor has not been invoked yet.
For native nft expressions this is no problem because all expressions
that have such side effects make sure these are handled from the commit
phase, rather than async cleanup.
For nft_compat however this isn't true.
Instead of forcing synchronous behaviour for nft_compat, keep track
of the number of outstanding destructor calls.
When we attempt to create a new expression, flush the cleanup worker
to make sure destructors have completed.
With lots of help from Pablo Neira.
Reported-by: Pablo Neira Ayso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The flag CRYPTO_ALG_INTERNAL is not meant to be used outside of
the Crypto API. It isn't needed here anyway.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Increment the mgmt revision due to the recently added new commands.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Ben Greear has repeatedly reported in the past (for a few years
probably) that this triggers repeatedly in certain scenarios.
Make this a macro so that each callsite can trigger the warning
only once - that will still give us an idea of what's going on
and what paths can reach it, but avoids being too noisy.
Link: https://lore.kernel.org/r/20200730155212.06fd3a95dbfb.I0b16829aabfaf5f642bce401502a29d16e2dd444@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Let drivers advertise support for AP-mode WPA/WPA2-PSK 4-way handshake
offloading with a new NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK flag.
Extend use of NL80211_ATTR_PMK attribute indicating it might be passed
as part of NL80211_CMD_START_AP command, and contain the PSK (which is
the PMK, hence the name).
The driver is assumed to handle the 4-way handshake by itself in this
case, instead of relying on userspace.
Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Link: https://lore.kernel.org/r/20200623134938.39997-2-chi-hsien.lin@cypress.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is in fact 'disabled' in the spec, but there it's in a
place where that actually makes sense. In our internal data
structures, it doesn't really make sense, and in fact the
previous commit just fixed a bug in that area.
Make this safer by inverting the polarity from 'disabled' to
'enabled'.
Link: https://lore.kernel.org/r/20200730130051.5d8399545bd9.Ie62fdcd1a6cd9c969315bc124084a494ca6c8df3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This can be used to run mac80211 rx processing on a batch of frames in NAPI
poll before passing them to the network stack in a large batch.
This can improve icache footprint, or it can be used to pass frames via
netif_receive_skb_list.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20200726110611.46886-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Already parse the radiotap header in ieee80211_monitor_select_queue.
In a subsequent commit this will allow us to add a radiotap flag that
influences the queue on which injected packets will be sent.
This also fixes the incomplete validation of the injected frame in
ieee80211_monitor_select_queue: currently an out of bounds memory
access may occur in in the called function ieee80211_select_queue_80211
if the 802.11 header is too small.
Note that in ieee80211_monitor_start_xmit the radiotap header is parsed
again, which is necessairy because ieee80211_monitor_select_queue is not
always called beforehand.
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://lore.kernel.org/r/20200723100153.31631-6-Mathy.Vanhoef@kuleuven.be
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Use the IEEE80211_TX_CTRL_NO_SEQNO flag in ieee80211_tx_info to mark
probe requests whose sequence number must not be overwritten. This
provides consistency with the radiotap flag that can be set to indicate
that the sequence number of an injected frame should not be overwritten.
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://lore.kernel.org/r/20200723100153.31631-4-Mathy.Vanhoef@kuleuven.be
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Check if the Tx control flag is set to prevent sequence number overwrites,
and if so, do not assign a new sequence number to the transmitted frame.
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://lore.kernel.org/r/20200723100153.31631-3-Mathy.Vanhoef@kuleuven.be
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The radiotap specification contains a flag to indicate that the sequence
number of an injected frame should not be overwritten. Parse this flag
and define and set a corresponding Tx control flag.
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://lore.kernel.org/r/20200723100153.31631-2-Mathy.Vanhoef@kuleuven.be
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In ieee80211_tx_dequeue there is a check to see if the dequeued frame
is allowed in the current state. Injected frames that are normally
not allowed are being be dropped here. Fix this by checking if a
frame was injected and if so always allowing it.
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://lore.kernel.org/r/20200723100153.31631-1-Mathy.Vanhoef@kuleuven.be
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Adding bss-color configuration is only valid in HE mode.
Earlier we have enabled it by default, irrespective of
capabilities/mode. Fix that.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
Signed-off-by: P Praneesh <ppranees@codeaurora.org>
Link: https://lore.kernel.org/r/1594262781-21444-1-git-send-email-ppranees@codeaurora.org
[fix up commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
AQL does not take into account that most HT/VHT/HE traffic is A-MPDU aggregated.
Because of that, the per-packet airtime overhead is vastly overestimated.
Improve it by assuming an average aggregation length of 16 for non-legacy
traffic if not using the VO AC queue.
This should improve performance with high data rates, especially with multiple
stations
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20200724182816.18678-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Besides information about num of peerings and gate connectivity,
the mesh formation byte also contains a flag for authentication
server connectivity, that currently cannot be set in the mesh conf.
This patch adds this capability, which is necessary to implement
802.1X authentication in mesh mode.
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20200611140238.427461-1-markus.theil@tu-ilmenau.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, before being able to forward a packet between two 802.11s
nodes, both a PLINK handshake is performed upon receiving a beacon and
then later a PREQ/PREP exchange for path discovery is performed on
demand upon receiving a data frame to forward.
When running a mesh protocol on top of an 802.11s interface, like
batman-adv, we do not need the multi-hop mesh routing capabilities of
802.11s and usually set mesh_fwding=0. However, even with mesh_fwding=0
the PREQ/PREP path discovery is still performed on demand. Even though
in this scenario the next hop PREQ/PREP will determine is always the
direct 11s neighbor node.
The new mesh_nolearn parameter allows to skip the PREQ/PREP exchange in
this scenario, leading to a reduced delay, reduced packet buffering and
simplifies HWMP in general.
mesh_nolearn is still rather conservative in that if the packet destination
is not a direct 11s neighbor, it will fall back to PREQ/PREP path
discovery.
For normal, multi-hop 802.11s mesh routing it is usually not advisable
to enable mesh_nolearn as a transmission to a direct but distant neighbor
might be worse than reaching that same node via a more robust /
higher throughput etc. multi-hop path.
Cc: Sven Eckelmann <sven@narfation.org>
Cc: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Linus Lüssing <ll@simonwunderlich.de>
Link: https://lore.kernel.org/r/20200617073034.26149-1-linus.luessing@c0d3.blue
[fix nl80211 policy to range 0/1 only]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The low level driver adds its own opaque information
in the BSS table in the cfg80211_bss structure.
The low level driver may need to signal that this information
is no longer relevant and needs to be recreated.
Add an API to allow the low level driver to do that.
iwlwifi needs this because it keeps there an information about
the firmware's internal clock. This is kept in mac80211's
struct ieee80211_bss::sync_device_ts.
This information is populated while we scan, we add the
internal firmware's clock to each beacon which allows us to
program the firmware correctly after association so that
it'll know when (in terms of its internal clock) the DTIM
and TBTT will happen.
When the firmware is reset this internal clock is reset as
well and ieee80211_bss::sync_device_ts is no longer accurate.
iwlwifi will call this new API any time the firmware is started.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://lore.kernel.org/r/20200625111524.3992-1-emmanuel.grumbach@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Re-write the end of 'nl80211_trigger_scan()' with a more standard, easy to
understand and future proof version.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20200712173551.274448-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since commit 5fe231e873 ("cfg80211: vastly simplify locking"), the
'unlock' label at the end of 'nl80211_trigger_scan()' is useless and
misleading, because nothing is unlocked there.
Direct return can be used instead of 'err = -<error code>; goto unlock;'
construction.
Remove this label and simplify code accordingly.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20200712173539.274395-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
nl80211 vendor netlink dumpit, like netlink_callback->dump, should
signal successful completion by returning 0.
Currently, that will just cause dumpit to be called again, possibly
many times until an error occurs. Since skb->len is never going to be
0 by the time dumpit is called, the only way for dumpit to signal
completion is by returning an error. If it returns a positive value,
the current message is cancelled, but that positive value is returned
and nl80211_vendor_cmd_dump gets called again.
Fix that by passing a return value of 0 through.
Signed-off-by: Julian Squires <julian@cipht.net>
Link: https://lore.kernel.org/r/20200720145033.401307-1-julian@cipht.net
[reword commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently rates_idx is being initialized with the value -1 and this
value is never read so the initialization is redundant and can be
removed. The next time the variable is used it is assigned a value
that is returned a few statements later. Just return i - 1 and
remove the need for rates_idx.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200722153830.959010-1-colin.king@canonical.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When an LE connection is requested and an RPA update is needed via
hci_connect_le_scan, the default scanning parameters are used rather
than the connect parameters. This leads to significant delays in the
connection establishment process when using lower duty cycle scanning
parameters.
The patch simply looks at the pended connection list when trying to
determine which scanning parameters should be used.
Before:
< HCI Command: LE Set Extended Scan Parameters (0x08|0x0041) plen 8
#378 [hci0] 1659.247156
Own address type: Public (0x00)
Filter policy: Ignore not in white list (0x01)
PHYs: 0x01
Entry 0: LE 1M
Type: Passive (0x00)
Interval: 367.500 msec (0x024c)
Window: 37.500 msec (0x003c)
After:
< HCI Command: LE Set Extended Scan Parameters (0x08|0x0041) plen 8
#39 [hci0] 7.422109
Own address type: Public (0x00)
Filter policy: Ignore not in white list (0x01)
PHYs: 0x01
Entry 0: LE 1M
Type: Passive (0x00)
Interval: 60.000 msec (0x0060)
Window: 60.000 msec (0x0060)
Signed-off-by: Alain Michaud <alainm@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Yu Liu <yudiliu@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* remove a warning that can trigger in certain races
* check a function pointer before using it
* check before adding 6 GHz to avoid a warning in mesh
* fix two memory leaks in mesh
* fix a TX status bug leading to a memory leak
-----BEGIN PGP SIGNATURE-----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=xoMY
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-davem-2020-07-30' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
A couple of more changes:
* remove a warning that can trigger in certain races
* check a function pointer before using it
* check before adding 6 GHz to avoid a warning in mesh
* fix two memory leaks in mesh
* fix a TX status bug leading to a memory leak
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Make use of the flex_array_size() helper to calculate the size of a
flexible array member within an enclosing structure.
This helper offers defense-in-depth against potential integer
overflows, while at the same time makes it explicitly clear that
we are dealing with a flexible array member.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When BPF sk lookup invokes reuseport handling for the selected socket, it
should ignore the fact that reuseport group can contain connected UDP
sockets. With BPF sk lookup this is not relevant as we are not scoring
sockets to find the best match, which might be a connected UDP socket.
Fix it by unconditionally accepting the socket selected by reuseport.
This fixes the following two failures reported by test_progs.
# ./test_progs -t sk_lookup
...
#73/14 UDP IPv4 redir and reuseport with conns:FAIL
...
#73/20 UDP IPv6 redir and reuseport with conns:FAIL
...
Fixes: a57066b1a0 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net")
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200726120228.1414348-1-jakub@cloudflare.com
Number of .dumpit functions try to ignore -EOPNOTSUPP errors.
Recent change missed that, and started reporting all errors
but -EMSGSIZE back from dumps. This leads to situation like
this:
$ devlink dev info
devlink answers: Operation not supported
Dump should not report an error just because the last device
to be queried could not provide an answer.
To fix this and avoid similar confusion make sure we clear
err properly, and not leave it set to an error if we don't
terminate the iteration.
Fixes: c62c2cfb80 ("net: devlink: don't ignore errors during dumpit")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There's a race between rxrpc_sendmsg setting up a call, but then failing to
send anything on it due to an error, and recvmsg() seeing the call
completion occur and trying to return the state to the user.
An assertion fails in rxrpc_recvmsg() because the call has already been
released from the socket and is about to be released again as recvmsg deals
with it. (The recvmsg_q queue on the socket holds a ref, so there's no
problem with use-after-free.)
We also have to be careful not to end up reporting an error twice, in such
a way that both returns indicate to userspace that the user ID supplied
with the call is no longer in use - which could cause the client to
malfunction if it recycles the user ID fast enough.
Fix this by the following means:
(1) When sendmsg() creates a call after the point that the call has been
successfully added to the socket, don't return any errors through
sendmsg(), but rather complete the call and let recvmsg() retrieve
them. Make sendmsg() return 0 at this point. Further calls to
sendmsg() for that call will fail with ESHUTDOWN.
Note that at this point, we haven't send any packets yet, so the
server doesn't yet know about the call.
(2) If sendmsg() returns an error when it was expected to create a new
call, it means that the user ID wasn't used.
(3) Mark the call disconnected before marking it completed to prevent an
oops in rxrpc_release_call().
(4) recvmsg() will then retrieve the error and set MSG_EOR to indicate
that the user ID is no longer known by the kernel.
An oops like the following is produced:
kernel BUG at net/rxrpc/recvmsg.c:605!
...
RIP: 0010:rxrpc_recvmsg+0x256/0x5ae
...
Call Trace:
? __init_waitqueue_head+0x2f/0x2f
____sys_recvmsg+0x8a/0x148
? import_iovec+0x69/0x9c
? copy_msghdr_from_user+0x5c/0x86
___sys_recvmsg+0x72/0xaa
? __fget_files+0x22/0x57
? __fget_light+0x46/0x51
? fdget+0x9/0x1b
do_recvmmsg+0x15e/0x232
? _raw_spin_unlock+0xa/0xb
? vtime_delta+0xf/0x25
__x64_sys_recvmmsg+0x2c/0x2f
do_syscall_64+0x4c/0x78
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 357f5ef646 ("rxrpc: Call rxrpc_release_call() on error in rxrpc_new_client_call()")
Reported-by: syzbot+b54969381df354936d96@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* Improve the description of the key l2tp subsystem data structures.
* Add high-level description of the main APIs for interacting with l2tp
core.
* Add documentation for the l2tp netlink session command callbacks.
* Document the session pseudowire callbacks.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All of the l2tp subsystem's exported symbols are exported using
EXPORT_SYMBOL_GPL, except for l2tp_recv_common and l2tp_ioctl.
These functions alone are not useful without the rest of the l2tp
infrastructure, so there's no practical benefit to these symbols using a
different export policy.
Change these exports to use EXPORT_SYMBOL_GPL for consistency with the
rest of l2tp.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The structure of an L2TP data packet header varies depending on the
version of the L2TP protocol being used.
struct l2tp_session used to have a build_header callback to abstract
this difference away. It's clearer to simply choose the correct
function to use when building the data packet (and we save on the
function pointer in the session structure).
This approach does mean dereferencing the parent tunnel structure in
order to determine the tunnel version, but we're doing that in the
transmit path in any case.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_session_delete is used to schedule a session instance for deletion.
The function itself always returns zero, and none of its direct callers
check its return value, so have the function return void.
This change de-facto changes the l2tp netlink session_delete callback
prototype since all pseudowires currently use l2tp_session_delete for
their implementation of that operation.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tunnel and session instances are reference counted, and shouldn't be
directly freed by pseudowire code.
Rather than exporting l2tp_tunnel_free and l2tp_session_free, make them
private to l2tp_core.c, and export the refcount functions instead.
In order to do this, the refcount functions cannot be declared as
inline. Since the codepaths which take and drop tunnel and session
references are not directly in the datapath this shouldn't cause
performance issues.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When __l2tp_session_unhash was first added it was used outside of
l2tp_core.c, but that's no longer the case.
As such, there's no longer a need to export the function. Make it
private inside l2tp_core.c, and relocate it to avoid having to declare
the function prototype in l2tp_core.h.
Since the function is no longer used outside l2tp_core.c, remove the
"__" prefix since we don't need to indicate anything special about its
expected use to callers.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IPV6_ADDRFORM causes resource leaks when converting an IPv6 socket
to IPv4, particularly struct ipv6_ac_socklist. Similar to
struct ipv6_mc_socklist, we should just close it on this path.
This bug can be easily reproduced with the following C program:
#include <stdio.h>
#include <string.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <arpa/inet.h>
int main()
{
int s, value;
struct sockaddr_in6 addr;
struct ipv6_mreq m6;
s = socket(AF_INET6, SOCK_DGRAM, 0);
addr.sin6_family = AF_INET6;
addr.sin6_port = htons(5000);
inet_pton(AF_INET6, "::ffff:192.168.122.194", &addr.sin6_addr);
connect(s, (struct sockaddr *)&addr, sizeof(addr));
inet_pton(AF_INET6, "fe80::AAAA", &m6.ipv6mr_multiaddr);
m6.ipv6mr_interface = 5;
setsockopt(s, SOL_IPV6, IPV6_JOIN_ANYCAST, &m6, sizeof(m6));
value = AF_INET;
setsockopt(s, SOL_IPV6, IPV6_ADDRFORM, &value, sizeof(value));
close(s);
return 0;
}
Reported-by: ch3332xr@gmail.com
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
__bpfilter_process_sockopt never initialized the pos variable passed
to the pipe write. This has been mostly harmless in the past as pipes
ignore the offset, but the switch to kernel_write now verified the
position, which can lead to a failure depending on the exact stack
initialization pattern. Initialize the variable to zero to make
rw_verify_area happy.
Fixes: 6955a76fbc ("bpfilter: switch to kernel_write")
Reported-by: Christian Brauner <christian.brauner@ubuntu.com>
Reported-by: Rodrigo Madera <rodrigo.madera@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Rodrigo Madera <rodrigo.madera@gmail.com>
Tested-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/bpf/20200730160900.187157-1-hch@lst.de
This lets us use socket storage from the following hooks:
* BPF_CGROUP_INET_SOCK_CREATE
* BPF_CGROUP_INET_SOCK_RELEASE
* BPF_CGROUP_INET4_POST_BIND
* BPF_CGROUP_INET6_POST_BIND
Using existing 'bpf_sk_storage_get_proto' doesn't work because
second argument is ARG_PTR_TO_SOCKET. Even though
BPF_PROG_TYPE_CGROUP_SOCK hooks operate on 'struct bpf_sock',
the verifier still considers it as a PTR_TO_CTX.
That's why I'm adding another 'bpf_sk_storage_get_cg_sock_proto'
definition strictly for BPF_PROG_TYPE_CGROUP_SOCK which accepts
ARG_PTR_TO_CTX which is really 'struct sock' for this program type.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200729003104.1280813-1-sdf@google.com
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2020-07-30
Please note that I did the first time now --no-ff merges
of my testing branch into the master branch to include
the [PATCH 0/n] message of a patchset. Please let me
know if this is desirable, or if I should do it any
different.
1) Introduce a oseq-may-wrap flag to disable anti-replay
protection for manually distributed ICVs as suggested
in RFC 4303. From Petr Vaněk.
2) Patchset to fully support IPCOMP for vti4, vti6 and
xfrm interfaces. From Xin Long.
3) Switch from a linear list to a hash list for xfrm interface
lookups. From Eyal Birger.
4) Fixes to not register one xfrm(6)_tunnel object twice.
From Xin Long.
5) Fix two compile errors that were introduced with the
IPCOMP support for vti and xfrm interfaces.
Also from Xin Long.
6) Make the policy hold queue work with VTI. This was
forgotten when VTI was implemented.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This converts all the existing DECLARE_TASKLET() (and ...DISABLED)
macros with DECLARE_TASKLET_OLD() in preparation for refactoring the
tasklet callback type. All existing DECLARE_TASKLET() users had a "0"
data argument, it has been removed here as well.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
This patch adds support to enable the use of RPA Address resolution
using expermental feature mgmt command.
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This warning can trigger if there is a mismatch between frames that were
sent with the sta pointer set vs tx status frames reported for the sta address.
This can happen due to race conditions on re-creating stations, or even
in the case of .sta_add/remove being used instead of .sta_state, which can cause
frames to be sent to a station that has not been uploaded yet.
If there is an actual underflow issue, it should show up in the device airtime
warning below, so it is better to remove this one.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20200725084533.13829-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Allocated ack_frame id from local->ack_status_frames is not really
stored in the tx_info for 802.3 Tx path. Due to this, tx ack status
is not reported and ack_frame id is not freed for the buffers requiring
tx ack status. Also move the memset to 0 of tx_info before
IEEE80211_TX_CTL_REQ_TX_STATUS flag assignment.
Fixes: 50ff477a86 ("mac80211: add 802.11 encapsulation offloading support")
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org>
Link: https://lore.kernel.org/r/1595427617-1713-1-git-send-email-vthiagar@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the case where a vendor command does not implement doit, and has no
flags set, doit would not be validated and a NULL pointer dereference
would occur, for example when invoking the vendor command via iw.
I encountered this while developing new vendor commands. Perhaps in
practice it is advisable to always implement doit along with dumpit,
but it seems reasonable to me to always check doit anyway, not just
when NEED_WDEV.
Signed-off-by: Julian Squires <julian@cipht.net>
Link: https://lore.kernel.org/r/20200706211353.2366470-1-julian@cipht.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The commit 24a2042cb2 ("mac80211: add HE 6 GHz Band Capability
element") failed to check device capability before adding HE 6 GHz
capability element. Below warning is reported in 11ac device in mesh.
Fix that by checking device capability at HE 6 GHz cap IE addition
in mesh beacon and association request.
WARNING: CPU: 1 PID: 1897 at net/mac80211/util.c:2878
ieee80211_ie_build_he_6ghz_cap+0x149/0x150 [mac80211]
[ 3138.720358] Call Trace:
[ 3138.720361] ieee80211_mesh_build_beacon+0x462/0x530 [mac80211]
[ 3138.720363] ieee80211_start_mesh+0xa8/0xf0 [mac80211]
[ 3138.720365] __cfg80211_join_mesh+0x122/0x3e0 [cfg80211]
[ 3138.720368] nl80211_join_mesh+0x3d3/0x510 [cfg80211]
Fixes: 24a2042cb2 ("mac80211: add HE 6 GHz Band Capability element")
Reported-by: Markus Theil <markus.theil@tu-ilmenau.de>
Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
Link: https://lore.kernel.org/r/1593656424-18240-1-git-send-email-rmanohar@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Enable RPA timeout during bluetooth initialization.
The RPA timeout value is used from hdev, which initialized from
debug_fs
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
In this patch if le_create_conn process is started restrict to
disable address resolution and same is disabled during
le_enh_connection_complete
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When address resolution is enabled and set_privacy is enabled let's
use own address type as 0x03
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When using controller based address resolution, then the new address
types 0x02 and 0x03 are used. These types need to be converted back into
either public address or random address types.
This patch is specially during LE_CREATE_CONN if using own_add_type as 0x02
or 0x03.
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When the whitelist is updated, then also update the entries of the
resolving list for devices where IRKs are available.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sathish Narsimman <sathish.narasimman@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When the LL Privacy support is available, then as part of enabling or
disabling passive background scanning, it is required to set up the
controller based address resolution as well.
Since only passive background scanning is utilizing the whitelist, the
address resolution is now bound to the whitelist and passive background
scanning. All other resolution can be easily done by the host stack.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sathish Narsimman <sathish.narasimman@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When using controller based address resolution, then the new address
types 0x02 and 0x03 are used. These types need to be converted back into
either public address or random address types.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sathish Narsimman <sathish.narasimman@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Currently, espintcp_rcv drops packets silently, which makes debugging
issues difficult. Count packets as either XfrmInHdrError (when the
packet was too short or contained invalid data) or XfrmInError (for
other issues).
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Currently, short messages (less than 4 bytes after the length header)
will break the stream of messages. This is unnecessary, since we can
still parse messages even if they're too short to contain any usable
data. This is also bogus, as keepalive messages (a single 0xff byte),
though not needed with TCP encapsulation, should be allowed.
This patch changes the stream parser so that short messages are
accepted and dropped in the kernel. Messages that contain a valid SPI
or non-ESP header are processed as before.
Fixes: e27cca96cd ("xfrm: add espintcp (RFC 8229)")
Reported-by: Andrew Cagney <cagney@libreswan.org>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This patch fixes:
commit b9aaec8f0b ("fib: use indirect call wrappers in the most common
fib_rules_ops") which didn't consider the case when
CONFIG_IPV6_MULTIPLE_TABLES is not set.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: b9aaec8f0b ("fib: use indirect call wrappers in the most common fib_rules_ops")
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
the first one in particular has been quite noisy ("broke" in -rc5)
so this would be worth landing even this late even if users likely
won't see a difference
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE/IPbcYBuWt0zoYhOq06b7GqY5nAFAl8hFUAACgkQq06b7GqY
5nAlAA/+NawXB/rLi4v4HYFEKM4qkGZGgj/Ugw6sqRc/z43UMAVzhD+D9+gLBG5k
Yka4CgOf+tLedIvW8DhHb22i8e3erQr4FCgfeHzZ3kuuZUYn4hXguBQitv6ra1SH
VkKpfOFIviL2h602NF1qVfVGCeM5TRd3TGKMSn/86eeGHP/kNhHAxh0IOXUlsENN
3ZUR55tPO38dlXzQuT68d2mAa2TNnf7NBUI7h8mQLRHAYl3yyZ93Xa+6gfdJO+k3
EBKdKa/k2Whb//EoMui+j/1DXKBFUztS21GMthGpaGM0ZmNUGPmVoXc3ZzUSEpzd
uCFeXjWLt6lbSMrbuWbZNyPodFZANQJ5s9iOhmZvXs6uNyM9j+Pi3ICEQrcf7wIw
9cnHG/jZoMgCyelh7Rg1ILG8pEDox3sjfhjun/xce1xOGU4/N0VXyimVqx2BKAC3
4LwveluSCmYuaAewhe3w3EH4i2eJQDfravBc8+6C8RLGSGcdI6tRKG4xGhitbjzk
fhZcacUyeC9RMe6S0dh3I0d+EUhcnY2re53kP5ihkUaYOeqfHG7XUNO3C4BAruoR
hXDo8cNK6kaCs08+Dp88cGcFsYoNHjLUeDzWKTQVY3YdoDBREmUNbtH2aH9vF6sX
GUxUaoG+ZAsaY+MoinuGV6tcGyRYFbQjfgLdKTP1Kp/g4gM8qeo=
=kJqr
-----END PGP SIGNATURE-----
Merge tag '9p-for-5.8-2' of git://github.com/martinetd/linux into master
Pull 9p fixes from Dominique Martinet:
"A couple of syzcaller fixes for 5.8
The first one in particular has been quite noisy ("broke" in -rc5) so
this would be worth landing even this late even if users likely won't
see a difference"
* tag '9p-for-5.8-2' of git://github.com/martinetd/linux:
9p/trans_fd: Fix concurrency del of req_list in p9_fd_cancelled/p9_read_work
net/9p: validate fds in p9_fd_open
Cited commit mistakenly removed the trap group for externally routed
packets (e.g., via the management interface) and grouped locally routed
and externally routed packet traps under the same group, thereby
subjecting them to the same policer.
This can result in problems, for example, when FRR is restarted and
suddenly all transient traffic is trapped to the CPU because of a
default route through the management interface. Locally routed packets
required to re-establish a BGP connection will never reach the CPU and
the routing tables will not be re-populated.
Fix this by using a different trap group for externally routed packets.
Fixes: 8110668ecd ("mlxsw: spectrum_trap: Register layer 3 control traps")
Reported-by: Alex Veber <alexve@mellanox.com>
Tested-by: Alex Veber <alexve@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
fib_trie_unmerge() is called with RTNL held, but not from an RCU
read-side critical section. This leads to the following warning [1] when
the FIB alias list in a leaf is traversed with
hlist_for_each_entry_rcu().
Since the function is always called with RTNL held and since
modification of the list is protected by RTNL, simply use
hlist_for_each_entry() and silence the warning.
[1]
WARNING: suspicious RCU usage
5.8.0-rc4-custom-01520-gc1f937f3f83b #30 Not tainted
-----------------------------
net/ipv4/fib_trie.c:1867 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/164:
#0: ffffffff85a27850 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x49a/0xbd0
stack backtrace:
CPU: 0 PID: 164 Comm: ip Not tainted 5.8.0-rc4-custom-01520-gc1f937f3f83b #30
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014
Call Trace:
dump_stack+0x100/0x184
lockdep_rcu_suspicious+0x153/0x15d
fib_trie_unmerge+0x608/0xdb0
fib_unmerge+0x44/0x360
fib4_rule_configure+0xc8/0xad0
fib_nl_newrule+0x37a/0x1dd0
rtnetlink_rcv_msg+0x4f7/0xbd0
netlink_rcv_skb+0x17a/0x480
rtnetlink_rcv+0x22/0x30
netlink_unicast+0x5ae/0x890
netlink_sendmsg+0x98a/0xf40
____sys_sendmsg+0x879/0xa00
___sys_sendmsg+0x122/0x190
__sys_sendmsg+0x103/0x1d0
__x64_sys_sendmsg+0x7d/0xb0
do_syscall_64+0x54/0xa0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fc80a234e97
Code: Bad RIP value.
RSP: 002b:00007ffef8b66798 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc80a234e97
RDX: 0000000000000000 RSI: 00007ffef8b66800 RDI: 0000000000000003
RBP: 000000005f141b1c R08: 0000000000000001 R09: 0000000000000000
R10: 00007fc80a2a8ac0 R11: 0000000000000246 R12: 0000000000000001
R13: 0000000000000000 R14: 00007ffef8b67008 R15: 0000556fccb10020
Fixes: 0ddcf43d5d ("ipv4: FIB Local/MAIN table collapse")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
A sequence counter write side critical section must be protected by some
form of locking to serialize writers. If the serialization primitive is
not disabling preemption implicitly, preemption has to be explicitly
disabled before entering the sequence counter write side critical
section.
A plain seqcount_t does not contain the information of which lock must
be held when entering a write side critical section.
Use the new seqcount_spinlock_t and seqcount_mutex_t data types instead,
which allow to associate a lock with the sequence counter. This enables
lockdep to verify that the lock used for writer serialization is held
when the write side critical section is entered.
If lockdep is disabled this lock association is compiled out and has
neither storage size nor runtime overhead.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200720155530.1173732-17-a.darwish@linutronix.de
A sequence counter write side critical section must be protected by some
form of locking to serialize writers. A plain seqcount_t does not
contain the information of which lock must be held when entering a write
side critical section.
Use the new seqcount_rwlock_t data type, which allows to associate a
rwlock with the sequence counter. This enables lockdep to verify that
the rwlock used for writer serialization is held when the write side
critical section is entered.
If lockdep is disabled this lock association is compiled out and has
neither storage size nor runtime overhead.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200720155530.1173732-16-a.darwish@linutronix.de
A sequence counter write side critical section must be protected by some
form of locking to serialize writers. A plain seqcount_t does not
contain the information of which lock must be held when entering a write
side critical section.
Use the new seqcount_spinlock_t data type, which allows to associate a
spinlock with the sequence counter. This enables lockdep to verify that
the spinlock used for writer serialization is held when the write side
critical section is entered.
If lockdep is disabled this lock association is compiled out and has
neither storage size nor runtime overhead.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200720155530.1173732-15-a.darwish@linutronix.de
This avoids another inderect call per RX packet which save us around
20-40 ns.
Changelog:
v1 -> v2:
- Move declaraions to fib_rules.h to remove warnings
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When red_init() fails, red_destroy() is called to clean up.
If the timer is not initialized yet, del_timer_sync() will
complain. So we have to move timer_setup() before any failure.
Reported-and-tested-by: syzbot+6e95a4fabf88dc217145@syzkaller.appspotmail.com
Fixes: aee9caa03f ("net: sched: sch_red: Add qevents "early_drop" and "mark"")
Cc: Petr Machata <petrm@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ip6_route_info_create() invokes nexthop_get(), which increases the
refcount of the "nh".
When ip6_route_info_create() returns, local variable "nh" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of
ip6_route_info_create(). When nexthops can not be used with source
routing, the function forgets to decrease the refcnt increased by
nexthop_get(), causing a refcnt leak.
Fix this issue by pulling up the error source routing handling when
nexthops can not be used with source routing.
Fixes: f88d8ea67f ("ipv6: Plumb support for nexthop object in a fib6_info")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MPTCP socket's write_seq member can be read without the msk lock
held, so use WRITE_ONCE() to store it.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MPTCP socket's write_seq member should be read with READ_ONCE() when
the msk lock is not held.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bare TCP ack skbs are freed right after MPTCP sees them, so the work to
allocate, zero, and populate the MPTCP skb extension is wasted. Detect
these skbs and do not add skb extensions to them.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MPTCP state machine handles disconnections on non-fallback connections,
but the mptcp_sock still needs to get notified when fallback subflows
disconnect.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RFC 8684 appendix D describes the connection state machine for
MPTCP. This patch implements the DATA_FIN / DATA_ACK exchanges and
MPTCP-level socket state changes described in that appendix, rather than
simply sending DATA_FIN along with TCP FIN when disconnecting subflows.
DATA_FIN is now sent and acknowledged before shutting down the
subflows. Received DATA_FIN information (if not part of a data packet)
is written to the MPTCP socket when the incoming DSS option is parsed by
the subflow, and the MPTCP worker is scheduled to process the
flag. DATA_FIN received as part of a full DSS mapping will be handled
when the mapping is processed.
The DATA_FIN is acknowledged by the worker if the reader is caught
up. If there is still data to be moved to the MPTCP-level queue, ack_seq
will be incremented to account for the DATA_FIN when it reaches the end
of the stream and a DATA_ACK will be sent to the peer.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After DATA_FIN has been sent, the peer will acknowledge it. An ack of
the relevant MPTCP-level sequence number will update the MPTCP
connection state appropriately.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This will be used to transition to the appropriate state on close and
determine if a DATA_FIN needs to be sent for that state transition.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Incoming DATA_FIN headers need to propagate the presence of the DATA_FIN
bit and the associated sequence number to the MPTCP layer, even when
arriving on a bare ACK that does not get added to the receive queue. Add
structure members to store the DATA_FIN information and helpers to set
and check those values.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since DATA_FIN information is the same for every subflow, store it only
in the mptcp_sock.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mptcp_close() acquires the msk lock, so it clearly should not be held
before the function is called.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A MPTCP socket where sending has been shut down should not attempt to
send additional data, since DATA_FIN has already been sent.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RFC 8684-compliant DATA_FIN needs to be sent and ack'd before subflows
are closed with TCP FIN, so write DATA_FIN DSS headers whenever their
transmission has been enabled by the MPTCP connection-level socket.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure not just the pointer itself but the whole range lies in
the user address space. For that pass the length and then use
the access_ok helper to do the check.
Fixes: 6d04fe15f7 ("net: optimize the sockptr_t for unified kernel/user address spaces")
Reported-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
sockptr_advance never properly worked. Replace it with _offset variants
of copy_from_sockptr and copy_to_sockptr.
Fixes: ba423fdaa5 ("net: add a new sockptr_t type")
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This was accidentally removed in an unrelated commit.
Fixes: c2f12630c6 ("netfilter: switch nf_setsockopt to sockptr_t")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that there's a core tracepoint that reports these events, there's
no need to maintain dprintk() call sites in each arm of the switch
statements.
We also refresh the documenting comments.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Jason tells me that a ULP cannot rely on getting an ESTABLISHED
and DISCONNECTED event pair for each connection, so transport
reference counting in the CM event handler will never be reliable.
Now that we have ib_drain_qp(), svcrdma should no longer need to
hold transport references while Sends and Receives are posted. So
remove the get/put call sites in the CM event handlers.
This eliminates a significant source of locked memory bus traffic.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
During a connection tear down, the Receive queue is flushed before
the device resources are freed. Typically, all the Receives flush
with IB_WR_FLUSH_ERR.
However, any pending successful Receives flush with IB_WR_SUCCESS,
and the server automatically posts a fresh Receive to replace the
completing one. This happens even after the connection has closed
and the RQ is drained. Receives that are posted after the RQ is
drained appear never to complete, causing a Receive resource leak.
The leaked Receive buffer is left DMA-mapped.
To prevent these late-posted recv_ctxt's from leaking, block new
Receive posting after XPT_CLOSE is set.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
xsk_getsockopt() is copying uninitialized stack memory to userspace when
'extra_stats' is 'false'. Fix it. Doing '= {};' is sufficient since currently
'struct xdp_statistics' is defined as follows:
struct xdp_statistics {
__u64 rx_dropped;
__u64 rx_invalid_descs;
__u64 tx_invalid_descs;
__u64 rx_ring_full;
__u64 rx_fill_ring_empty_descs;
__u64 tx_ring_empty_descs;
};
When being copied to the userspace, 'stats' will not contain any uninitialized
'holes' between struct fields.
Fixes: 8aa5a33578 ("xsk: Add new statistics")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/bpf/20200728053604.404631-1-yepeilin.cs@gmail.com
The original return is NOTIFY_STOP, but notifier_call_chain would stop
the future call for register_pm_notifier even registered on other Kernel
modules with the same priority which value is zero.
Signed-off-by: Max Chou <max.chou@realtek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
For some reason they tend to squat on the very first CSR/
Cambridge Silicon Radio VID/PID instead of paying fees.
This is an extremely common problem; the issue goes as back as 2013
and these devices are only getting more popular, even rebranded by
reputable vendors and sold by retailers everywhere.
So, at this point in time there are hundreds of modern dongles reusing
the ID of what originally was an early Bluetooth 1.1 controller.
Linux is the only place where they don't work due to spotty checks
in our detection code. It only covered a minimum subset.
So what's the big idea? Take advantage of the fact that all CSR
chips report the same internal version as both the LMP sub-version and
HCI revision number. It always matches, couple that with the manufacturer
code, that rarely lies, and we now have a good idea of who is who.
Additionally, by compiling a list of user-reported HCI/lsusb dumps, and
searching around for legit CSR dongles in similar product ranges we can
find what CSR BlueCore firmware supported which Bluetooth versions.
That way we can narrow down ranges of fakes for each of them.
e.g. Real CSR dongles with LMP subversion 0x73 are old enough that
support BT 1.1 only; so it's a dead giveaway when some
third-party BT 4.0 dongle reuses it.
So, to sum things up; there are multiple classes of fake controllers
reusing the same 0A12:0001 VID/PID. This has been broken for a while.
Known 'fake' bcdDevices: 0x0100, 0x0134, 0x1915, 0x2520, 0x7558, 0x8891
IC markings on 0x7558: FR3191AHAL 749H15143 (???)
https://bugzilla.kernel.org/show_bug.cgi?id=60824
Fixes: 81cac64ba2 (Deal with USB devices that are faking CSR vendor)
Reported-by: Michał Wiśniewski <brylozketrzyn@gmail.com>
Tested-by: Mike Johnson <yuyuyak@gmail.com>
Tested-by: Ricardo Rodrigues <ekatonb@gmail.com>
Tested-by: M.Hanny Sabbagh <mhsabbagh@outlook.com>
Tested-by: Oussama BEN BRAHIM <b.brahim.oussama@gmail.com>
Tested-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com>
Signed-off-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
commit 17175d1a27 ("xfrm: esp6: fix encapsulation header offset
computation") changed esp6_input_done2 to correctly find the size of
the IPv6 header that precedes the TCP/UDP encapsulation header, but
didn't adjust the final call to skb_set_transport_header, which I
assumed was correct in using skb_network_header_len.
Xiumei Mu reported that when we create xfrm states that include port
numbers in the selector, traffic from the user sockets is dropped. It
turns out that we get a state mismatch in __xfrm_policy_check, because
we end up trying to compare the encapsulation header's ports with the
selector that's based on user traffic ports.
Fixes: 0146dca70b ("xfrm: add support for UDPv6 encapsulation of ESP")
Fixes: 26333c37fc ("xfrm: add IPv6 support for espintcp")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
commit 547ce4cfb3 ("switch cmsghdr_from_user_compat_to_kern() to
copy_from_user()") missed one of the places where ucmlen should've been
replaced with cmsg.cmsg_len, now that we are fetching the entire struct
rather than doing it field-by-field.
As the result, compat sendmsg() with several different-sized cmsg
attached started to fail with EINVAL. Trivial to fix, fortunately.
Fixes: 547ce4cfb3 ("switch cmsghdr_from_user_compat_to_kern() to copy_from_user()")
Reported-by: Nick Bowler <nbowler@draconx.ca>
Tested-by: Nick Bowler <nbowler@draconx.ca>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Print PRP specific information from node table as part of debugfs
node table display. Also display the node as DAN-H or DAN-P depending
on the info from node table.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DAN-P (Dual Attached Nodes PRP) nodes are expected to receive
traditional IP packets as well as PRP (Parallel Redundancy
Protocol) tagged (trailer) packets. PRP trailer is 6 bytes
of PRP protocol unit called RCT, Redundancy Control Trailer
(RCT) similar to HSR tag. PRP network can have traditional
devices such as bridges/switches or PC attached to it and
should be able to communicate. Regular Ethernet devices treat
the RCT as pads. This patch adds logic to format L2 frames
from network stack to add a trailer (RCT) and send it as
duplicates over the slave interfaces when the protocol is
PRP as per IEC 62439-3. At the ingress, it strips the trailer,
do duplicate detection and rejection and forward a stripped
frame up the network stack. PRP device should accept frames
from Singly Attached Nodes (SAN) and thus the driver mark
the link where the frame came from in the node table.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As a preparatory patch to introduce PRP, refactor the code specific to
handling HSR frames into separate functions and call them through
proto_ops function pointers.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for generation of PRP supervision frames. For PRP,
supervision frame format is similar to HSR version 0, but have
a PRP Redundancy Control Trailer (RCT) added and uses a different
message type, PRP_TLV_LIFE_CHECK_DD. Also update
is_supervision_frame() to include the new message type used for
PRP supervision frame.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As a preparatory patch to introduce support for PRP protocol, add a
protocol ops ptr in the private hsr structure to hold function
pointers as some of the functions at protocol level packet
handling is different for HSR vs PRP. It is expected that PRP will
add its of set of functions for protocol handling. Modify existing
hsr_announce() function to call proto_ops->send_sv_frame() to send
supervision frame for HSR. This is expected to be different for PRP.
So introduce a ops function ptr, send_sv_frame() for the same and
initialize it to send_hsr_supervsion_frame(). Modify hsr_announce()
to call proto_ops->send_sv_frame().
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As a preparatory patch to introduce PRP protocol support in the
driver, refactor the skb init code to a separate function.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parallel Redundancy Protocol (PRP) is another redundancy protocol
introduced by IEC 63439 standard. It is similar to HSR in many
aspects:-
- Use a pair of Ethernet interfaces to created the PRP device
- Use a 6 byte redundancy protocol part (RCT, Redundancy Check
Trailer) similar to HSR Tag.
- Has Link Redundancy Entity (LRE) that works with RCT to implement
redundancy.
Key difference is that the protocol unit is a trailer instead of a
prefix as in HSR. That makes it inter-operable with tradition network
components such as bridges/switches which treat it as pad bytes,
whereas HSR nodes requires some kind of translators (Called redbox) to
talk to regular network devices. This features allows regular linux box
to be converted to a DAN-P box. DAN-P stands for Dual Attached Node - PRP
similar to DAN-H (Dual Attached Node - HSR).
Add a comment at the header/source code to explicitly state that the
driver files also handles PRP protocol as well.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unblocking sockets used for outgoing connections were not containing
inet info about the initial connection due to a typo there: the value of
"err" variable is negative in the kernelspace.
This fixes the creation of additional subflows where the remote port has
to be reused if the other host didn't announce another one. This also
fixes inet_diag showing blank info about MPTCP sockets from unblocking
sockets doing a connect().
Fixes: 41be81a8d3 ("mptcp: fix unblocking connect()")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MPLS has no dependency with the device type of underlying devices.
Hence the device type check to add mpls support for devices can be
avoided.
Signed-off-by: Martin Varghese <martin.varghese@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cited commit mistakenly copied provided option to 'val' instead of to
'mfc':
```
- if (copy_from_user(&mfc, optval, sizeof(mfc))) {
+ if (copy_from_sockptr(&val, optval, sizeof(val))) {
```
Fix this by copying the option to 'mfc'.
selftest router_multicast.sh before:
$ ./router_multicast.sh
smcroutectl: Unknown or malformed IPC message 'a' from client.
smcroutectl: failed removing multicast route, does not exist.
TEST: mcast IPv4 [FAIL]
Multicast not received on first host
TEST: mcast IPv6 [ OK ]
smcroutectl: Unknown or malformed IPC message 'a' from client.
smcroutectl: failed removing multicast route, does not exist.
TEST: RPF IPv4 [FAIL]
Multicast not received on first host
TEST: RPF IPv6 [ OK ]
selftest router_multicast.sh after:
$ ./router_multicast.sh
TEST: mcast IPv4 [ OK ]
TEST: mcast IPv6 [ OK ]
TEST: RPF IPv4 [ OK ]
TEST: RPF IPv6 [ OK ]
Fixes: 01ccb5b48f ("net/ipv4: switch ip_mroute_setsockopt to sockptr_t")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the maximum dmb buffer limit for an ism device is reached no more
dmb buffers can be registered. When this happens the reason code is set
to SMC_CLC_DECL_MEM indicating out-of-memory. This is the same reason
code that is used when no memory could be allocated for the new dmb
buffer.
This is confusing for users when they see this error but there is more
memory available. To solve this set a separate new reason code when the
maximum dmb limit exceeded.
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that BPF program/link management is centralized in generic net_device
code, kernel code never queries program id from drivers, so
XDP_QUERY_PROG/XDP_QUERY_PROG_HW commands are unnecessary.
This patch removes all the implementations of those commands in kernel, along
the xdp_attachment_query().
This patch was compile-tested on allyesconfig.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200722064603.3350758-10-andriin@fb.com
Add support for LINK_UPDATE command for BPF XDP link to enable reliable
replacement of underlying BPF program.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200722064603.3350758-6-andriin@fb.com
Add bpf_link-based API (bpf_xdp_link) to attach BPF XDP program through
BPF_LINK_CREATE command.
bpf_xdp_link is mutually exclusive with direct BPF program attachment,
previous BPF program should be detached prior to attempting to create a new
bpf_xdp_link attachment (for a given XDP mode). Once BPF link is attached, it
can't be replaced by other BPF program attachment or link attachment. It will
be detached only when the last BPF link FD is closed.
bpf_xdp_link will be auto-detached when net_device is shutdown, similarly to
how other BPF links behave (cgroup, flow_dissector). At that point bpf_link
will become defunct, but won't be destroyed until last FD is closed.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200722064603.3350758-5-andriin@fb.com
Further refactor XDP attachment code. dev_change_xdp_fd() is split into two
parts: getting bpf_progs from FDs and attachment logic, working with
bpf_progs. This makes attachment logic a bit more straightforward and
prepares code for bpf_xdp_link inclusion, which will share the common logic.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200722064603.3350758-4-andriin@fb.com
Instead of delegating to drivers, maintain information about which BPF
programs are attached in which XDP modes (generic/skb, driver, or hardware)
locally in net_device. This effectively obsoletes XDP_QUERY_PROG command.
Such re-organization simplifies existing code already. But it also allows to
further add bpf_link-based XDP attachments without drivers having to know
about any of this at all, which seems like a good setup.
XDP_SETUP_PROG/XDP_SETUP_PROG_HW are just low-level commands to driver to
install/uninstall active BPF program. All the higher-level concerns about
prog/link interaction will be contained within generic driver-agnostic logic.
All the XDP_QUERY_PROG calls to driver in dev_xdp_uninstall() were removed.
It's not clear for me why dev_xdp_uninstall() were passing previous prog_flags
when resetting installed programs. That seems unnecessary, plus most drivers
don't populate prog_flags anyways. Having XDP_SETUP_PROG vs XDP_SETUP_PROG_HW
should be enough of an indicator of what is required of driver to correctly
reset active BPF program. dev_xdp_uninstall() is also generalized as an
iteration over all three supported mode.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200722064603.3350758-3-andriin@fb.com
The bpf iterator for bpf sock local storage map
is implemented. User space interacts with sock
local storage map with fd as a key and storage value.
In kernel, passing fd to the bpf program does not
really make sense. In this case, the sock itself is
passed to bpf program.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200723184116.590602-1-yhs@fb.com
This patch refactored target bpf_iter_init_seq_priv_t callback
function to accept additional information. This will be needed
in later patches for map element targets since a particular
map should be passed to traverse elements for that particular
map. In the future, other information may be passed to target
as well, e.g., pid, cgroup id, etc. to customize the iterator.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200723184110.590156-1-yhs@fb.com
There is no functionality change for this patch.
Struct bpf_iter_reg is used to register a bpf_iter target,
which includes information for both prog_load, link_create
and seq_file creation.
This patch puts fields related seq_file creation into
a different structure. This will be useful for map
elements iterator where one iterator covers different
map types and different map types may have different
seq_ops, init/fini private_data function and
private_data size.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200723184109.590030-1-yhs@fb.com
When BPF socket lookup prog selects a socket that belongs to a reuseport
group, and the reuseport group has connected sockets in it, the socket
selected by reuseport will be discarded, and socket returned by BPF socket
lookup will be used instead.
Modify this behavior so that the socket selected by reuseport running after
BPF socket lookup always gets used. Ignore the fact that the reuseport
group might have connections because it is only relevant when scoring
sockets during regular hashtable-based lookup.
Fixes: 72f7e9440e ("udp: Run SK_LOOKUP BPF program on socket lookup")
Fixes: 6d4201b138 ("udp6: Run SK_LOOKUP BPF program on socket lookup")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Link: https://lore.kernel.org/bpf/20200722161720.940831-2-jakub@cloudflare.com
The UDP reuseport conflict was a little bit tricky.
The net-next code, via bpf-next, extracted the reuseport handling
into a helper so that the BPF sk lookup code could invoke it.
At the same time, the logic for reuseport handling of unconnected
sockets changed via commit efc6b6f6c3
which changed the logic to carry on the reuseport result into the
rest of the lookup loop if we do not return immediately.
This requires moving the reuseport_has_conns() logic into the callers.
While we are here, get rid of inline directives as they do not belong
in foo.c files.
The other changes were cases of more straightforward overlapping
modifications.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Fix RCU locaking in iwlwifi, from Johannes Berg.
2) mt76 can access uninitialized NAPI struct, from Felix Fietkau.
3) Fix race in updating pause settings in bnxt_en, from Vasundhara
Volam.
4) Propagate error return properly during unbind failures in ax88172a,
from George Kennedy.
5) Fix memleak in adf7242_probe, from Liu Jian.
6) smc_drv_probe() can leak, from Wang Hai.
7) Don't muck with the carrier state if register_netdevice() fails in
the bonding driver, from Taehee Yoo.
8) Fix memleak in dpaa_eth_probe, from Liu Jian.
9) Need to check skb_put_padto() return value in hsr_fill_tag(), from
Murali Karicheri.
10) Don't lose ionic RSS hash settings across FW update, from Shannon
Nelson.
11) Fix clobbered SKB control block in act_ct, from Wen Xu.
12) Missing newlink in "tx_timeout" sysfs output, from Xiongfeng Wang.
13) IS_UDPLITE cleanup a long time ago, incorrectly handled
transformations involving UDPLITE_RECV_CC. From Miaohe Lin.
14) Unbalanced locking in netdevsim, from Taehee Yoo.
15) Suppress false-positive error messages in qed driver, from Alexander
Lobakin.
16) Out of bounds read in ax25_connect and ax25_sendmsg, from Peilin Ye.
17) Missing SKB release in cxgb4's uld_send(), from Navid Emamdoost.
18) Uninitialized value in geneve_changelink(), from Cong Wang.
19) Fix deadlock in xen-netfront, from Andera Righi.
19) flush_backlog() frees skbs with IRQs disabled, so should use
dev_kfree_skb_irq() instead of kfree_skb(). From Subash Abhinov
Kasiviswanathan.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits)
drivers/net/wan: lapb: Corrected the usage of skb_cow
dev: Defer free of skbs in flush_backlog
qrtr: orphan socket in qrtr_release()
xen-netfront: fix potential deadlock in xennet_remove()
flow_offload: Move rhashtable inclusion to the source file
geneve: fix an uninitialized value in geneve_changelink()
bonding: check return value of register_netdevice() in bond_newlink()
tcp: allow at most one TLP probe per flight
AX.25: Prevent integer overflows in connect and sendmsg
cxgb4: add missing release on skb in uld_send()
net: atlantic: fix PTP on AQC10X
AX.25: Prevent out-of-bounds read in ax25_sendmsg()
sctp: shrink stream outq when fails to do addstream reconf
sctp: shrink stream outq only when new outcnt < old outcnt
AX.25: Fix out-of-bounds read in ax25_connect()
enetc: Remove the mdio bus on PF probe bailout
net: ethernet: ti: add NETIF_F_HW_TC hw feature flag for taprio offload
net: ethernet: ave: Fix error returns in ave_init
drivers/net/wan/x25_asy: Fix to make it work
ipvs: fix the connection sync failed in some cases
...
IRQs are disabled when freeing skbs in input queue.
Use the IRQ safe variant to free skbs here.
Fixes: 145dd5f9c8 ("net: flush the softnet backlog in process context")
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We have to detach sock from socket in qrtr_release(),
otherwise skb->sk may still reference to this socket
when the skb is released in tun->queue, particularly
sk->sk_wq still points to &sock->wq, which leads to
a UAF.
Reported-and-tested-by: syzbot+6720d64f31c081c2f708@syzkaller.appspotmail.com
Fixes: 28fb4e59a4 ("net: qrtr: Expose tunneling endpoint to user space")
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_session_free called BUG_ON if the tunnel magic feather value wasn't
correct. The intent of this was to catch lifetime bugs; for example
early tunnel free due to incorrect use of reference counts.
Since the tunnel magic feather being wrong indicates either early free
or structure corruption, we can avoid doing more damage by simply
leaving the tunnel structure alone. If the tunnel refcount isn't
dropped when it should be, the tunnel instance will remain in the
kernel, resulting in the tunnel structure and socket leaking.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_session_free is only called by l2tp_session_dec_refcount when the
reference count reaches zero, so it's of limited value to validate the
reference count value in l2tp_session_free itself.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_session_queue_purge is used during session shutdown to drop any
skbs queued for reordering purposes according to L2TP dataplane rules.
The BUG_ON in this function checks the session magic feather in an
attempt to catch lifetime bugs.
Rather than crashing the kernel with a BUG_ON, we can simply WARN_ON and
refuse to do anything more -- in the worst case this could result in a
leak. However this is highly unlikely given that the session purge only
occurs from codepaths which have obtained the session by means of a lookup
via. the parent tunnel and which check the session "dead" flag to
protect against shutdown races.
While we're here, have l2tp_session_queue_purge return void rather than
an integer, since neither of the callsites checked the return value.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
checkpatch advises that WARN_ON and recovery code are preferred over
BUG_ON which crashes the kernel.
l2tp_ppp has a BUG_ON check of struct seq_file's private pointer in
pppol2tp_seq_start prior to accessing data through that pointer.
Rather than crashing, we can simply bail out early and return NULL in
order to terminate the seq file processing in much the same way as we do
when reaching the end of tunnel/session instances to render.
Retain a WARN_ON to help trace possible bugs in this area.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
checkpatch advises that WARN_ON and recovery code are preferred over
BUG_ON which crashes the kernel.
l2tp_ppp.c's BUG_ON checks of the l2tp session structure's "magic" field
occur in code paths where it's reasonably easy to recover:
* In the case of pppol2tp_sock_to_session, we can return NULL and the
caller will bail out appropriately. There is no change required to
any of the callsites of this function since they already handle
pppol2tp_sock_to_session returning NULL.
* In the case of pppol2tp_session_destruct we can just avoid
decrementing the reference count on the suspect session structure.
In the worst case scenario this results in a memory leak, which is
preferable to a crash.
Convert these uses of BUG_ON to WARN_ON accordingly.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_tunnel_closeall is only called from l2tp_core.c, and it's easy
to statically analyse the code path calling it to validate that it
should never be passed a NULL tunnel pointer.
Having a BUG_ON checking the tunnel pointer triggers a checkpatch
warning. Since the BUG_ON is of no value, remove it to avoid the
warning.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_session_queue_purge is only called from l2tp_core.c, and it's easy
to statically analyse the code paths calling it to validate that it
should never be passed a NULL session pointer.
Having a BUG_ON checking the session pointer triggers a checkpatch
warning. Since the BUG_ON is of no value, remove it to avoid the
warning.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_dfs_seq_start had a BUG_ON to catch a possible programming error in
l2tp_dfs_seq_open.
Since we can easily bail out of l2tp_dfs_seq_start, prefer to do that
and flag the error with a WARN_ON rather than crashing the kernel.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
checkpatch warns about multiple assignments.
Update l2tp accordingly.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend the rfc 4884 read interface introduced for ipv4 in
commit eba75c587e ("icmp: support rfc 4884") to ipv6.
Add socket option SOL_IPV6/IPV6_RECVERR_RFC4884.
Changes v1->v2:
- make ipv6_icmp_error_rfc4884 static (file scope)
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The RFC 4884 spec is largely the same between IPv4 and IPv6.
Factor out the IPv4 specific parts in preparation for IPv6 support:
- icmp types supported
- icmp header size, and thus offset to original datagram start
- datagram length field offset in icmp(6)hdr.
- datagram length field word size: 4B for IPv4, 8B for IPv6.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1) Only accept packets with original datagram len field >= header len.
The extension header must start after the original datagram headers.
The embedded datagram len field is compared against the 128B minimum
stipulated by RFC 4884. It is unlikely that headers extend beyond
this. But as we know the exact header length, check explicitly.
2) Remove the check that datagram length must be <= 576B.
This is a send constraint. There is no value in testing this on rx.
Within private networks it may be known safe to send larger packets.
Process these packets.
This test was also too lax. It compared original datagram length
rather than entire icmp packet length. The stand-alone fix would be:
- if (hlen + skb->len > 576)
+ if (-skb_network_offset(skb) + skb->len > 576)
Fixes: eba75c587e ("icmp: support rfc 4884")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The variable status is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed. Also put the variable declarations into
reverse christmas tree order.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The previous patch introduced a deadlock, this patch fixes it by making
sure the work is canceled without holding the global ovs lock. This is
done by moving the reorder processing one layer up to the netns level.
Fixes: eac87c413b ("net: openvswitch: reorder masks array based on usage")
Reported-by: syzbot+2c4ff3614695f75ce26c@syzkaller.appspotmail.com
Reported-by: syzbot+bad6507e5db05017b008@syzkaller.appspotmail.com
Reviewed-by: Paolo <pabeni@redhat.com>
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This sockopt accepts two kinds of parameters, using struct
sctp_sack_info and struct sctp_assoc_value. The mentioned commit didn't
notice an implicit cast from the smaller (latter) struct to the bigger
one (former) when copying the data from the user space, which now leads
to an attempt to write beyond the buffer (because it assumes the storing
buffer is bigger than the parameter itself).
Fix it by allocating a sctp_sack_info on stack and filling it out based
on the small struct for the compat case.
Changelog stole from an earlier patch from Marcelo Ricardo Leitner.
Fixes: ebb25defdc ("sctp: pass a kernel pointer to sctp_setsockopt_delayed_ack")
Reported-by: syzbot+0e4699d000d8b874d8dc@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For architectures like x86 and arm64 we don't need the separate bit to
indicate that a pointer is a kernel pointer as the address spaces are
unified. That way the sockptr_t can be reduced to a union of two
pointers, which leads to nicer calling conventions.
The only caveat is that we need to check that users don't pass in kernel
address and thus gain access to kernel memory. Thus the USER_SOCKPTR
helper is replaced with a init_user_sockptr function that does this check
and returns an error if it fails.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rework the remaining setsockopt code to pass a sockptr_t instead of a
plain user pointer. This removes the last remaining set_fs(KERNEL_DS)
outside of architecture specific code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> [ieee802154]
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Factour out a helper to set the IPv6 option headers from
do_ipv6_setsockopt.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Note that the get case is pretty weird in that it actually copies data
back to userspace from setsockopt.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Split ipv6_flowlabel_opt into a subfunction for each action and a small
wrapper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is mostly to prepare for cleaning up the callers, as bpfilter by
design can't handle kernel pointers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The bpfilter user mode helper processes the optval address using
process_vm_readv. Don't send it kernel addresses fed under
set_fs(KERNEL_DS) as that won't work.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Split __bpfilter_process_sockopt into a low-level send request routine and
the actual setsockopt hook to split the init time ping from the actual
setsockopt processing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The __user doesn't make sense when casting to an integer type, just
switch to a uintptr_t cast which also removes the need for the __force.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adding new cls flower keys for hash value and hash
mask and dissect the hash info from the skb into
the flow key towards flow classication.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Retreive a hash value from the SKB and store it
in the dissector key for future matching.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I noticed that touching linux/rhashtable.h causes lib/vsprintf.c to
be rebuilt. This dependency came through a bogus inclusion in the
file net/flow_offload.h. This patch moves it to the right place.
This patch also removes a lingering rhashtable inclusion in cls_api
created by the same commit.
Fixes: 4e481908c5 ("flow_offload: move tc indirect block to...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Braino when converting "buf->len -=" to "buf->len = len -".
The result is under-estimation of the ralign and rslack values. On
krb5p mounts, this has caused READDIR to fail with EIO, and KASAN
splats when decoding READLINK replies.
As a result of fixing this oversight, the gss_unwrap method now
returns a buf->len that can be shorter than priv_len for small
RPC messages. The additional adjustment done in unwrap_priv_data()
can underflow buf->len. This causes the nfsd_request_too_large
check to fail during some NFSv3 operations.
Reported-by: Marian Rainer-Harbach
Reported-by: Pierre Sauter <pierre.sauter@stwm.de>
BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1886277
Fixes: 31c9590ae4 ("SUNRPC: Add "@len" parameter to gss_unwrap()")
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for net:
1) Fix NAT hook deletion when table is dormant, from Florian Westphal.
2) Fix IPVS sync stalls, from guodeqing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The purpose of this override is to give the user an indication of what
the number of the CPU port is (in DSA, the CPU port is a hardware
implementation detail and not a network interface capable of traffic).
However, it has always failed (by design) at providing this information
to the user in a reliable fashion.
Prior to commit 3369afba1e ("net: Call into DSA netdevice_ops
wrappers"), the behavior was to only override this callback if it was
not provided by the DSA master.
That was its first failure: if the DSA master itself was a DSA port or a
switchdev, then the user would not see the number of the CPU port in
/sys/class/net/eth0/phys_port_name, but the number of the DSA master
port within its respective physical switch.
But that was actually ok in a way. The commit mentioned above changed
that behavior, and now overrides the master's ndo_get_phys_port_name
unconditionally. That comes with problems of its own, which are worse in
a way.
The idea is that it's typical for switchdev users to have udev rules for
consistent interface naming. These are based, among other things, on
the phys_port_name attribute. If we let the DSA switch at the bottom
to start randomly overriding ndo_get_phys_port_name with its own CPU
port, we basically lose any predictability in interface naming, or even
uniqueness, for that matter.
So, there are reasons to let DSA override the master's callback (to
provide a consistent interface, a number which has a clear meaning and
must not be interpreted according to context), and there are reasons to
not let DSA override it (it breaks udev matching for the DSA master).
But, there is an alternative method for users to retrieve the number of
the CPU port of each DSA switch in the system:
$ devlink port
pci/0000:00:00.5/0: type eth netdev swp0 flavour physical port 0
pci/0000:00:00.5/2: type eth netdev swp2 flavour physical port 2
pci/0000:00:00.5/4: type notset flavour cpu port 4
spi/spi2.0/0: type eth netdev sw0p0 flavour physical port 0
spi/spi2.0/1: type eth netdev sw0p1 flavour physical port 1
spi/spi2.0/2: type eth netdev sw0p2 flavour physical port 2
spi/spi2.0/4: type notset flavour cpu port 4
spi/spi2.1/0: type eth netdev sw1p0 flavour physical port 0
spi/spi2.1/1: type eth netdev sw1p1 flavour physical port 1
spi/spi2.1/2: type eth netdev sw1p2 flavour physical port 2
spi/spi2.1/3: type eth netdev sw1p3 flavour physical port 3
spi/spi2.1/4: type notset flavour cpu port 4
So remove this duplicated, unreliable and troublesome method. From this
patch on, the phys_port_name attribute of the DSA master will only
contain information about itself (if at all). If the users need reliable
information about the CPU port they're probably using devlink anyway.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously TLP may send multiple probes of new data in one
flight. This happens when the sender is cwnd limited. After the
initial TLP containing new data is sent, the sender receives another
ACK that acks partial inflight. It may re-arm another TLP timer
to send more, if no further ACK returns before the next TLP timeout
(PTO) expires. The sender may send in theory a large amount of TLP
until send queue is depleted. This only happens if the sender sees
such irregular uncommon ACK pattern. But it is generally undesirable
behavior during congestion especially.
The original TLP design restrict only one TLP probe per inflight as
published in "Reducing Web Latency: the Virtue of Gentle Aggression",
SIGCOMM 2013. This patch changes TLP to send at most one probe
per inflight.
Note that if the sender is app-limited, TLP retransmits old data
and did not have this issue.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We recently added some bounds checking in ax25_connect() and
ax25_sendmsg() and we so we removed the AX25_MAX_DIGIS checks because
they were no longer required.
Unfortunately, I believe they are required to prevent integer overflows
so I have added them back.
Fixes: 8885bb0621 ("AX.25: Prevent out-of-bounds read in ax25_sendmsg()")
Fixes: 2f2a7ffad5 ("AX.25: Fix out-of-bounds read in ax25_connect()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Passing "sizeof(struct blah)" in kzalloc calls is less readable,
potentially prone to future bugs if the type of the pointer is changed,
and triggers checkpatch warnings.
Tweak the kzalloc calls in l2tp which use this form to avoid the
warning.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When creating an L2TP tunnel using the netlink API, userspace must
either pass a socket FD for the tunnel to use (for managed tunnels),
or specify the tunnel source/destination address (for unmanaged
tunnels).
Since source/destination addresses may be AF_INET or AF_INET6, the l2tp
netlink code has conditionally compiled blocks to support IPv6.
Rather than embedding these directly into l2tp_nl_cmd_tunnel_create
(where it makes the code difficult to read and confuses checkpatch to
boot) split the handling of address-related attributes into a separate
function.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_nl_tunnel_send has conditionally compiled code to support AF_INET6,
which makes the code difficult to follow and triggers checkpatch
warnings.
Split the code out into functions to handle the AF_INET v.s. AF_INET6
cases, which both improves readability and resolves the checkpatch
warnings.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
checkpatch warns about indentation and brace balancing around the
conditionally compiled code for AF_INET6 support in
l2tp_dfs_seq_tunnel_show.
By adding another check on the socket address type we can make the code
more readable while removing the checkpatch warning.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These checks are all simple and don't benefit from extra braces to
clarify intent. Remove them for easier-reading code.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
checkpatch warns about comparisons to NULL, e.g.
CHECK: Comparison to NULL could be written "!rt"
#474: FILE: net/l2tp/l2tp_ip.c:474:
+ if (rt == NULL) {
These sort of comparisons are generally clearer and more readable
the way checkpatch suggests, so update l2tp accordingly.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use eth_zero_addr() to clear mac address insetad of memset().
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
So that we can easily perform some basic PM-related
adimission checks before creating the child socket.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_send_active_reset() is more prone to transient errors
(memory allocation or xmit queue full): in stress conditions
the kernel may drop the egress packet, and the client will be
stuck.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When syncookie are in use, the TCP stack may feed into
subflow_syn_recv_sock() plain TCP request sockets. We can't
access mptcp_subflow_request_sock-specific fields on such
sockets. Explicitly check the rsk ops to do safe accesses.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mentioned function has several unneeded branches,
handle each case - MP_CAPABLE, MP_JOIN, fallback -
under a single conditional and drop quite a bit of
duplicate code.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently accepted msk sockets become established only after
accept() returns the new sk to user-space.
As MP_JOIN request are refused as per RFC spec on non fully
established socket, the above causes mp_join self-tests
instabilities.
This change lets the msk entering the established status
as soon as it receives the 3rd ack and propagates the first
subflow fully established status on the msk socket.
Finally we can change the subflow acceptance condition to
take in account both the sock state and the msk fully
established flag.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the unlikely event of a failure at connect time,
we currently clear the request_mptcp flag - so that
the MPC handshake is not started at all, but the msk
is not explicitly marked as fallback.
This would lead to later insertion of wrong DSS options
in the xmitted packets, in violation of RFC specs and
possibly fooling the peer.
Fixes: e1ff9e82e2 ("net: mptcp: improve fallback to TCP")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When updating a partially acked data fragment, we
actually corrupt it. This is irrelevant till we send
data on a single subflow, as retransmitted data, if
any are discarded by the peer as duplicate, but it
will cause data corruption as soon as we will start
creating non backup subflows.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we do not init the subflow write sequence for
MP_JOIN subflows. This will cause bad mapping being
generated as soon as we will use non backup subflow.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
checkpatch warned about the L2TP_SKB_CB macro's use of its argument: add
braces to avoid the problem.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In l2tp_core.c both l2tp_tunnel_create and l2tp_session_create take
quite a number of arguments and have a correspondingly long prototype.
This is both quite difficult to scan visually, and triggers checkpatch
warnings.
Add a line break to make these function prototypes more readable.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
checkpatch warns about use of seq_printf where seq_puts would do.
Modify l2tp_debugfs accordingly.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use BIT(x) rather than (1<<x), reported by checkpatch.pl.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reported by checkpatch:
"WARNING: function definition argument 'struct sock *'
should also have an identifier name"
Add an identifier name to help document the prototype.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_core has conditionally compiled code in l2tp_xmit_skb for IPv6
support. The structure of this code triggered a checkpatch warning
due to incorrect indentation.
Fix up the indentation to address the checkpatch warning.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arguments should be aligned with the function call open parenthesis as
per checkpatch. Tweak some function calls which were not aligned
correctly.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some l2tp code had line breaks which made the code more difficult to
read. These were originally motivated by the 80-character line width
coding guidelines, but were actually a negative from the perspective of
trying to follow the code.
Remove these linebreaks for clearer code, even if we do exceed 80
characters in width in some places.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Modify some l2tp comments to better adhere to kernel coding style, as
reported by checkpatch.pl.
Add descriptive comments for the l2tp per-net spinlocks to document
their use.
Fix an incorrect comment in l2tp_recv_common:
RFC2661 section 5.4 states that:
"The LNS controls enabling and disabling of sequence numbers by sending a
data message with or without sequence numbers present at any time during
the life of a session."
l2tp handles this correctly in l2tp_recv_common, but the comment around
the code was incorrect and confusing. Fix up the comment accordingly.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix up various whitespace issues as reported by checkpatch.pl:
* remove spaces around operators where appropriate,
* add missing blank lines following declarations,
* remove multiple blank lines, or trailing blank lines at the end of
functions.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Checks on `addr_len` and `usax->sax25_ndigis` are insufficient.
ax25_sendmsg() can go out of bounds when `usax->sax25_ndigis` equals to 7
or 8. Fix it.
It is safe to remove `usax->sax25_ndigis > AX25_MAX_DIGIS`, since
`addr_len` is guaranteed to be less than or equal to
`sizeof(struct full_sockaddr_ax25)`
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently devlink instance is searched on all doit() operations.
But it is optionally stored into user_ptr[0]. This requires
rediscovering devlink again doing post_doit().
Few devlink commands related to port shared buffers needs 3 pointers
(devlink, devlink_port, and devlink_sb) while executing doit commands.
Though devlink pointer can be derived from the devlink_port during
post_doit() operation when doit() callback has acquired devlink
instance lock, relying on such scheme to access devlik pointer makes
code very fragile.
Hence, to avoid ambiguity in post_doit() and to avoid searching
devlink instance again, simplify code by always storing devlink
instance in user_ptr[0] and derive devlink_sb pointer in their
respective callback routines.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When adding a stream with stream reconf, the new stream firstly is in
CLOSED state but new out chunks can still be enqueued. Then once gets
the confirmation from the peer, the state will change to OPEN.
However, if the peer denies, it needs to roll back the stream. But when
doing that, it only sets the stream outcnt back, and the chunks already
in the new stream don't get purged. It caused these chunks can still be
dequeued in sctp_outq_dequeue_data().
As its stream is still in CLOSE, the chunk will be enqueued to the head
again by sctp_outq_head_data(). This chunk will never be sent out, and
the chunks after it can never be dequeued. The assoc will be 'hung' in
a dead loop of sending this chunk.
To fix it, this patch is to purge these chunks already in the new
stream by calling sctp_stream_shrink_out() when failing to do the
addstream reconf.
Fixes: 11ae76e67a ("sctp: implement receiver-side procedures for the Reconf Response Parameter")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's not necessary to go list_for_each for outq->out_chunk_list
when new outcnt >= old outcnt, as no chunk with higher sid than
new (outcnt - 1) exists in the outqueue.
While at it, also move the list_for_each code in a new function
sctp_stream_shrink_out(), which will be used in the next patch.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Otherwise the 'chain_len' filed will carry random values,
some token creation calls will fail due to excessive chain
length, causing unexpected fallback to TCP.
Fixes: 2c5ebd001d ("mptcp: refactor token container")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Checks on `addr_len` and `fsa->fsa_ax25.sax25_ndigis` are insufficient.
ax25_connect() can go out of bounds when `fsa->fsa_ax25.sax25_ndigis`
equals to 7 or 8. Fix it.
This issue has been reported as a KMSAN uninit-value bug, because in such
a case, ax25_connect() reaches into the uninitialized portion of the
`struct sockaddr_storage` statically allocated in __sys_connect().
It is safe to remove `fsa->fsa_ax25.sax25_ndigis > AX25_MAX_DIGIS` because
`addr_len` is guaranteed to be less than or equal to
`sizeof(struct full_sockaddr_ax25)`.
Reported-by: syzbot+c82752228ed975b0a623@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=55ef9d629f3b3d7d70b69558015b63b48d01af66
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds support for the SIOCOUTQ IOCTL to get the send buffer fill
of a DCCP socket, like UDP and TCP sockets already have.
Regarding the used data field: DCCP uses per packet sequence numbers,
not per byte, so sequence numbers can't be used like in TCP. sk_wmem_queued
is not used by DCCP and always 0, even in test on highly congested paths.
Therefore this uses sk_wmem_alloc like in UDP.
Signed-off-by: Richard Sailer <richard_siegfried@systemli.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Due to unified Ethernet Switch Device Tree Bindings allow for ethernet-ports as
encapsulating node as well.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The buildbot found a config where the header isn't already implicitly
pulled in, so add an explicit include as well.
Fixes: 8c918ffbba ("net: remove compat_sock_common_{get,set}sockopt")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-07-21
The following pull-request contains BPF updates for your *net-next* tree.
We've added 46 non-merge commits during the last 6 day(s) which contain
a total of 68 files changed, 4929 insertions(+), 526 deletions(-).
The main changes are:
1) Run BPF program on socket lookup, from Jakub.
2) Introduce cpumap, from Lorenzo.
3) s390 JIT fixes, from Ilya.
4) teach riscv JIT to emit compressed insns, from Luke.
5) use build time computed BTF ids in bpf iter, from Yonghong.
====================
Purely independent overlapping changes in both filter.h and xdp.h
Signed-off-by: David S. Miller <davem@davemloft.net>
In pfkey_dump() dplen and splen can both be specified to access the
xfrm_address_t structure out of bounds in__xfrm_state_filter_match()
when it calls addr_match() with the indexes. Return EINVAL if either
are out of range.
Signed-off-by: Mark Salyzyn <salyzyn@android.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: kernel-team@android.com
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The sync_thread_backup only checks sk_receive_queue is empty or not,
there is a situation which cannot sync the connection entries when
sk_receive_queue is empty and sk_rmem_alloc is larger than sk_rcvbuf,
the sync packets are dropped in __udp_enqueue_schedule_skb, this is
because the packets in reader_queue is not read, so the rmem is
not reclaimed.
Here I add the check of whether the reader_queue of the udp sock is
empty or not to solve this problem.
Fixes: 2276f58ac5 ("udp: use a separate rx queue for packet reception")
Reported-by: zhouxudong <zhouxudong8@huawei.com>
Signed-off-by: guodeqing <geffrey.guo@huawei.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When expire_nodest_conn=1 and a destination is deleted, IPVS does not
expire the existing connections until the next matching incoming packet.
If there are many connection entries from a single client to a single
destination, many packets may get dropped before all the connections are
expired (more likely with lots of UDP traffic). An optimization can be
made where upon deletion of a destination, IPVS queues up delayed work
to immediately expire any connections with a deleted destination. This
ensures any reused source ports from a client (within the IPVS timeouts)
are scheduled to new real servers instead of silently dropped.
Signed-off-by: Andrew Sy Kim <kim.andrewsy@gmail.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Constify devlink instance pointer while checking if reload operation is
supported or not.
This helps to review the scope of checks done in reload.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reload operation is enabled or not is already checked by
devlink_reload(). Hence, remove the duplicate check from
devlink_nl_cmd_reload().
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no need to hold a device global lock when initializing
devlink device fields of a devlink instance which is not yet part of the
devices list.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can't use IS_UDPLITE to replace udp_sk->pcflag when UDPLITE_RECV_CC is
checked.
Fixes: b2bf1e2659 ("[UDP]: Clean up for IS_UDPLITE macro")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When I cat 'tx_timeout' by sysfs, it displays as follows. It's better to
add a newline for easy reading.
root@syzkaller:~# cat /sys/devices/virtual/net/lo/queues/tx-0/tx_timeout
0root@syzkaller:~#
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, SO_REUSEPORT does not work well if connected sockets are in a
UDP reuseport group.
Then reuseport_has_conns() returns true and the result of
reuseport_select_sock() is discarded. Also, unconnected sockets have the
same score, hence only does the first unconnected socket in udp_hslot
always receive all packets sent to unconnected sockets.
So, the result of reuseport_select_sock() should be used for load
balancing.
The noteworthy point is that the unconnected sockets placed after
connected sockets in sock_reuseport.socks will receive more packets than
others because of the algorithm in reuseport_select_sock().
index | connected | reciprocal_scale | result
---------------------------------------------
0 | no | 20% | 40%
1 | no | 20% | 20%
2 | yes | 20% | 0%
3 | no | 20% | 40%
4 | yes | 20% | 0%
If most of the sockets are connected, this can be a problem, but it still
works better than now.
Fixes: acdcecc612 ("udp: correct reuseport selection with connected sockets")
CC: Willem de Bruijn <willemb@google.com>
Reviewed-by: Benjamin Herrenschmidt <benh@amazon.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If an unconnected socket in a UDP reuseport group connect()s, has_conns is
set to 1. Then, when a packet is received, udp[46]_lib_lookup2() scans all
sockets in udp_hslot looking for the connected socket with the highest
score.
However, when the number of sockets bound to the port exceeds max_socks,
reuseport_grow() resets has_conns to 0. It can cause udp[46]_lib_lookup2()
to return without scanning all sockets, resulting in that packets sent to
connected sockets may be distributed to unconnected sockets.
Therefore, reuseport_grow() should copy has_conns.
Fixes: acdcecc612 ("udp: correct reuseport selection with connected sockets")
CC: Willem de Bruijn <willemb@google.com>
Reviewed-by: Benjamin Herrenschmidt <benh@amazon.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
One additional field btf_id is added to struct
bpf_ctx_arg_aux to store the precomputed btf_ids.
The btf_id is computed at build time with
BTF_ID_LIST or BTF_ID_LIST_GLOBAL macro definitions.
All existing bpf iterators are changed to used
pre-compute btf_ids.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200720163403.1393551-1-yhs@fb.com
tcp and udp bpf_iter can reuse some socket ids in
btf_sock_ids, so make it global.
I put the extern definition in btf_ids.h as a central
place so it can be easily discovered by developers.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200720163402.1393427-1-yhs@fb.com
Currently, socket types (struct tcp_sock, udp_sock, etc.)
used by bpf_skc_to_*() helpers are computed when vmlinux_btf
is first built in the kernel.
Commit 5a2798ab32
("bpf: Add BTF_ID_LIST/BTF_ID/BTF_ID_UNUSED macros")
implemented a mechanism to compute btf_ids at kernel build
time which can simplify kernel implementation and reduce
runtime overhead by removing in-kernel btf_id calculation.
This patch did exactly this, removing in-kernel btf_id
computation and utilizing build-time btf_id computation.
If CONFIG_DEBUG_INFO_BTF is not defined, BTF_ID_LIST will
define an array with size of 5, which is not enough for
btf_sock_ids. So define its own static array if
CONFIG_DEBUG_INFO_BTF is not defined.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200720163358.1393023-1-yhs@fb.com
The generic netlink is initialized far after the netlink protocol
itself at subsys_initcall. The devlink is initialized at the same
level, but after, as shown by a disassembly of the vmlinux:
[ ... ]
374 ffff8000115f22c0 <__initcall_devlink_init4>:
375 ffff8000115f22c4 <__initcall_genl_init4>:
[ ... ]
The function devlink_init() calls genl_register_family() before the
generic netlink subsystem is initialized.
As the generic netlink initcall level is set since 2005, it seems that
was not a problem, but now we have the thermal framework initialized
at the core_initcall level which creates the generic netlink family
and sends a notification which leads to a subtle memory corruption
only detectable when the CONFIG_INIT_ON_ALLOC_DEFAULT_ON option is set
with the earlycon at init time.
The thermal framework needs to be initialized early in order to begin
the mitigation as soon as possible. Moving it to postcore_initcall is
acceptable.
This patch changes the initialization level for the generic netlink
family to the core_initcall and comes after the netlink protocol
initialization.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: David S. Miller <davem@davemloft.net>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Link: https://lore.kernel.org/r/20200715074120.8768-1-daniel.lezcano@linaro.org
We forgot to support the xfrm policy hold queue when
VTI was implemented. This patch adds everything we
need so that we can use the policy hold queue together
with VTI interfaces.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Commit 02288248b0 ("tipc: eliminate gap indicator from ACK messages")
eliminated sending of the 'gap' indicator in regular ACK messages and
only allowed to build NACK message with enabled probe/probe_reply.
However, necessary correction for building NACK message was missed
in tipc_link_timeout() function. This leads to significant delay and
link reset (due to retransmission failure) in lossy environment.
This commit fixes it by setting the 'probe' flag to 'true' when
the receive deferred queue is not empty. As a result, NACK message
will be built to send back to another peer.
Fixes: 02288248b0 ("tipc: eliminate gap indicator from ACK messages")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The fragment packets do defrag in tcf_ct_handle_fragments
will clear the skb->cb which make the qdisc_skb_cb clear
too. So the qdsic_skb_cb should be store before defrag and
restore after that.
It also update the pkt_len after all the
fragments finish the defrag to one packet and make the
following actions counter correct.
Fixes: b57dc7c13e ("net/sched: Introduce action ct")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that DSA supports MTU configuration, undo the effects of commit
8b1efc0f83 ("net: remove MTU limits on a few ether_setup callers") and
let DSA interfaces use the default min_mtu and max_mtu specified by
ether_setup(). This is more important for min_mtu: since DSA is
Ethernet, the minimum MTU is the same as of any other Ethernet
interface, and definitely not zero. For the max_mtu, we have a callback
through which drivers can override that, if they want to.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Because kfree_skb already checked NULL skb parameter,
so the additional checks are unnecessary, just remove them.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
