IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Tegra20 EMC driver uses simple devfreq governor. Add simple devfreq
governor to the list of the Tegra20 EMC driver module softdeps to allow
userspace initramfs tools like dracut to automatically pull the devfreq
module into ramfs image together with the EMC module.
Reported-by: Nicolas Chauvet <kwizart@gmail.com>
Suggested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20211019231524.888-1-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Allow building the reset-brcmstb-rescal driver as module, add reset
lines for the Uniphier PXs3 audio and video input subsystems and
bindings for the Uniphier NX1 SoC, and add lan966x switch reset support
to the reset-microchip-sparx5 driver.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCYXBBkBcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwCF/AQDzczjKGzRt7UT5nGCRFs6cxI5R
QsTnpRTIcBfxGFrKAQEAvagsMyYOZgadazUZ1pWm8VfZ5yyVDCkR4mPtXy6DXAA=
=hBbU
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=L2UE
-----END PGP SIGNATURE-----
Merge tag 'reset-for-v5.16' of git://git.pengutronix.de/pza/linux into arm/drivers
Reset controller updates for v5.16
Allow building the reset-brcmstb-rescal driver as module, add reset
lines for the Uniphier PXs3 audio and video input subsystems and
bindings for the Uniphier NX1 SoC, and add lan966x switch reset support
to the reset-microchip-sparx5 driver.
* tag 'reset-for-v5.16' of git://git.pengutronix.de/pza/linux:
reset: mchp: sparx5: Extend support for lan966x
dt-bindings: reset: Add lan966x support
reset: uniphier: Add NX1 reset support
dt-bindings: reset: uniphier: Add NX1 reset control binding
reset: uniphier: Add audio system and video input reset control for PXs3
reset: Allow building Broadcom STB RESCAL as module
Link: https://lore.kernel.org/r/96e686f78f0e42bad666df5ec0cbcb2dcdc270a3.camel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Adds supports for the OP-TEE driver to communicate with secure world
using FF-A [1] as transport.
[1] https://developer.arm.com/documentation/den0077/latest
-----BEGIN PGP SIGNATURE-----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=sBWe
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=vn4m
-----END PGP SIGNATURE-----
Merge tag 'optee-ffa-for-v5.16' of git://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers
Add FF-A support in OP-TEE driver
Adds supports for the OP-TEE driver to communicate with secure world
using FF-A [1] as transport.
[1] https://developer.arm.com/documentation/den0077/latest
* tag 'optee-ffa-for-v5.16' of git://git.linaro.org/people/jens.wiklander/linux-tee:
optee: add FF-A support
optee: isolate smc abi
optee: refactor driver with internal callbacks
optee: simplify optee_release()
tee: add sec_world_id to struct tee_shm
tee: optee: Fix missing devices unregister during optee_remove
tee/optee/shm_pool: fix application of sizeof to pointer
Link: https://lore.kernel.org/r/20211018121324.GA2943530@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Converted in-place without moving file to drivers/clk.
tested on ts7250 (EP9302).
Only setting rate and change parent tested for, as they
are missing on ts7250:
- video
- I2S
- ADC/KEYPAD
- PWM
Only video and I2S clock are interesting, as they are
GATE + double DIV + MUX, all other are pretty much
common but require ep93xx_syscon_swlocked_write to set
registers.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20211018103105.146380-3-alexander.sverdlin@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use clk_prepare_enable()/clk_disable_unprepare() in preparation for switch
to Common Clock Framework, otherwise the following is visible:
WARNING: CPU: 0 PID: 97 at drivers/clk/clk.c:1011 clk_core_enable+0x9c/0xbc
Enabling unprepared mclk
...
Hardware name: Cirrus Logic EDB9302 Evaluation Board
...
clk_core_enable
clk_core_enable_lock
ep93xx_i2s_hw_params
snd_soc_dai_hw_params
soc_pcm_hw_params
snd_pcm_hw_params
snd_pcm_ioctl
...
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211018103105.146380-2-alexander.sverdlin@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
and improving logging.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYW0p4gAKCRDj7w1vZxhR
xQmwAPsFDSF9fDz1/75sF2FosGV2dPIOBCMUeNFbMesvBKlZMQD/WVAyu7jjiL7k
i3LThqHE8Jsefv0gqvu2nXaHfxuGmAo=
=yWZX
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=jasz
-----END PGP SIGNATURE-----
Merge tag 'sunxi-drivers-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/drivers
Some new drivers changes for the Allwinner SoCs, converting to a helper
and improving logging.
* tag 'sunxi-drivers-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
bus: sun50i-de2: Adjust printing error message
soc: sunxi_sram: Make use of the helper function devm_platform_ioremap_resource()
Link: https://lore.kernel.org/r/ad0aa469-9e1b-4bb6-a116-92648ed774fa.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Select REGMAP_MMIO for i.MX GPCv2 driver to avoid build issue.
- A couple of i.MX GPCv2 driver changes from Marek Vasut to turn
domain->pgc into bitfield for i.MX8MM GPU domain support.
- A series from Lucas Stach adding support of i.MX8MM nested power
domains like VPUMIX and DISPMIX which contains the ADB and BLK_CTRL.
- An off-by-one fix on Lucas' i.MX8M blk-ctrl driver code.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmFqh8YUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6v0wf/cc+xouEGoKRrAvj3QNB/2pxnDSbk
EmObg5/JG5s7+elWGXVxTQ21OFoiapQvj1MDHh1uv2sqX/EOMql45kbvjqOResht
4mEe1sB9Nr1xe5FmBK2XS6MhSjmYGTBrsNvLY4ctSITzb1FFE3QCmzIO5/TBrBgi
8oD9Uj8rauagxtcyG6/qXKCO5sBdfQ6BeEe22DKB0rstPkQOga2Ks8lsHeP6igvi
wuYUOEaQ6wBZfVaFm/l0KqjapmILyspM4FGW1q0vQ4cW8VcOTDK4tz8UpmXYQaaP
ovQIfnF7Nvk7acs62wT7Vd5t7UOQOfvT6YY2pSKQqotv1M1ip3jT9tPKyQ==
=MHbD
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=A9t6
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers update for 5.16:
- Select REGMAP_MMIO for i.MX GPCv2 driver to avoid build issue.
- A couple of i.MX GPCv2 driver changes from Marek Vasut to turn
domain->pgc into bitfield for i.MX8MM GPU domain support.
- A series from Lucas Stach adding support of i.MX8MM nested power
domains like VPUMIX and DISPMIX which contains the ADB and BLK_CTRL.
- An off-by-one fix on Lucas' i.MX8M blk-ctrl driver code.
* tag 'imx-drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: imx8m-blk-ctrl: off by one in imx8m_blk_ctrl_xlate()
soc: imx: imx8m-blk-ctrl: add DISP blk-ctrl
soc: imx: add i.MX8M blk-ctrl driver
soc: imx: gpcv2: support system suspend/resume
soc: imx: gpcv2: keep i.MX8M* bus clocks enabled
soc: imx: gpcv2: add domain option to keep domain clocks enabled
soc: imx: gpcv2: add lockdep annotation
Revert "soc: imx: gpcv2: move reset assert after requesting domain power up"
soc: imx: gpcv2: allow to disable individual power domains
imx: soc: Select REGMAP_MMIO
soc: imx: gpcv2: Set both GPC_PGC_nCTRL(GPU_2D|GPU_3D) for MX8MM GPU domain
soc: imx: gpcv2: Turn domain->pgc into bitfield
Link: https://lore.kernel.org/r/20211016140138.1603-2-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch extends sparx5 driver to support also the lan966x. The
process to reset the switch is the same only it has different offsets.
Therefore make the driver more generic and add support for lan966x.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Steen Hegelund <steen.hegelund@microchip.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20211018091522.1113510-3-horatiu.vultur@microchip.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This patch extends the existing file microchip,rst.yaml to support
also the lan966x. For this is added only a new compatible string.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20211018091522.1113510-2-horatiu.vultur@microchip.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Adds support for using FF-A [1] as transport to the OP-TEE driver.
Introduces struct optee_msg_param_fmem which carries all information
needed when OP-TEE is calling FFA_MEM_RETRIEVE_REQ to get the shared
memory reference mapped by the hypervisor in S-EL2. Register usage is
also updated to include the information needed.
The FF-A part of this driver is enabled if CONFIG_ARM_FFA_TRANSPORT is
enabled.
[1] https://developer.arm.com/documentation/den0077/latest
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Isolate the ABI based on raw SMCs. Code specific to the raw SMC ABI is
moved into smc_abi.c. This makes room for other ABIs with a clear
separation.
The driver changes to use module_init()/module_exit() instead of
module_platform_driver(). The platform_driver_register() and
platform_driver_unregister() functions called directly to keep the same
behavior. This is needed because module_platform_driver() is based on
module_driver() which can only be used once in a module.
A function optee_rpc_cmd() is factored out from the function
handle_rpc_func_cmd() to handle the ABI independent part of RPC
processing.
This patch is not supposed to change the driver behavior, it's only a
matter of reorganizing the code.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
The OP-TEE driver is refactored with three internal callbacks replacing
direct calls to optee_from_msg_param(), optee_to_msg_param() and
optee_do_call_with_arg().
These functions a central to communicating with OP-TEE in secure world
by using the SMC Calling Convention directly.
This refactoring makes room for using other primitives to communicate
with OP-TEE in secure world while being able to reuse as much as
possible from the present driver.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Simplifies optee_release() with a new helper function,
optee_close_session_helper() which has been factored out from
optee_close_session().
A separate optee_release_supp() is added for the supplicant device.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Adds sec_world_id to struct tee_shm which describes a shared memory
object. sec_world_id can be used by a driver to store an id assigned by
secure world.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
ASUS Transformer TF101 doesn't provide RAM code and in this case memory
timings should be selected based on identity information read out from
SDRAM chip. Support matching timings by LPDDR2 configuration.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20211006224659.21434-10-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Add common helpers for reading and parsing standard LPDDR2 configuration
properties.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20211006224659.21434-9-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Some Tegra20 boards don't have RAM code stored in NVMEM, which is used for
the memory chip identification and the identity information should be read
out from LPDDR2 chip in this case. Document new sub-node containing generic
LPDDR2 properties that will be used for the memory chip identification if
RAM code isn't available. The identification is done by reading out memory
configuration values from generic LPDDR2 mode registers of SDRAM chip and
comparing them with the values of device-tree 'lpddr2' sub-node.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211006224659.21434-8-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Elpida Memory designed, manufactured and sold dynamic random-access
memory (DRAM) products. It was acquired by Micron Technology in 2013,
still there are many devices with components from Elpida. Document the
vendor prefix.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211006224659.21434-6-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Elpida B8132B2PB-6D-F memory chip is used by ASUS Transformer TF101
tablet, add compatible for it. We need to specify this compatible it
for a device-tree node containing corresponding memory timings in order
to allow software to match the timings with the detected hardware.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211006224659.21434-5-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Add optional revision-id standard LPDDR2 properties which will help to
identify memory chip.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211006224659.21434-4-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Convert LPDDR2 binding to schema. I removed obsolete ti,jedec-lpddr2-*
compatibles since they were never used by device-trees and by the code.
I also changed "Elpida" compatible prefix to lowercase "elpida".
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211006224659.21434-3-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Move DDR bindings to memory-controllers directory to make them more
discoverable.
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211006224659.21434-2-digetx@gmail.com
[krzysztof: Correct path in lpddr3.txt and samsung,exynos5422-dmc.yaml]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
The > comparison should be >= to prevent reading one element beyond the
end of the array. The onecell_data->domains[] array is allocated in
imx8m_blk_ctrl_probe() and it has "onecell_data->num_domains" elements.
Fixes: 5b340e7813d4 ("soc: imx: add i.MX8M blk-ctrl driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
5.16, please pull the following:
- Cai updates the bcm-pmb and bcm63xx-power drivers to use the
devm_platform_ioremap_resource() helper
- Florian updates the Bus Interface Unit code to tune the 72116 and
72113 chips according to their existing counterparts. The GISB driver is
updated to be built as a non-removable module
-----BEGIN PGP SIGNATURE-----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=9x6r
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Is9X
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.16/drivers' of https://github.com/Broadcom/stblinux into arm/drivers
This pull request contains Broadcom ARM/ARM64 SoC drivers changes for
5.16, please pull the following:
- Cai updates the bcm-pmb and bcm63xx-power drivers to use the
devm_platform_ioremap_resource() helper
- Florian updates the Bus Interface Unit code to tune the 72116 and
72113 chips according to their existing counterparts. The GISB driver is
updated to be built as a non-removable module
* tag 'arm-soc/for-5.16/drivers' of https://github.com/Broadcom/stblinux:
bus: brcmstb_gisb: Allow building as module
soc: bcm: brcmstb: biuctrl: Tune MCP settings for 72116
soc: bcm: brcmstb: biuctrl: Tune MCP settings for 72113
soc: bcm63xx-power: Make use of the helper function devm_platform_ioremap_resource()
soc: bcm: bcm-pmb: Make use of the helper function devm_platform_ioremap_resource()
Link: https://lore.kernel.org/r/20211013174016.831348-3-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This drops the use of power-domains for exposing the load_state from the
QMP driver to clients, to avoid issues related to system suspend.
SMP2P becomes wakeup capable, to allow dying remoteprocs to wake up
Linux from suspend to perform recovery.
It adds RPM power-domain support for SM6350 and MSM8953 and base RPM
support for MSM8953 and QCM2290.
It adds support for MSM8996, SDM630 and SDM660 in the SPM driver, which
will enable the introduction of proper voltage scaling of the CPU
subsystem.
Support for releasing secondary CPUs on MSM8226 is introduced.
The Asynchronous Packet Router (APR) driver is extended to support the
new Generic Packet Router (GPR) variant, which is used to communicate
with the firmware in the new AudioReach audio driver.
Lastly it transitions a number of drivers to safer string functions, as
well as switching things to use devm_platform_ioremap_resource().
-----BEGIN PGP SIGNATURE-----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=FE4j
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=LLU7
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.16
This drops the use of power-domains for exposing the load_state from the
QMP driver to clients, to avoid issues related to system suspend.
SMP2P becomes wakeup capable, to allow dying remoteprocs to wake up
Linux from suspend to perform recovery.
It adds RPM power-domain support for SM6350 and MSM8953 and base RPM
support for MSM8953 and QCM2290.
It adds support for MSM8996, SDM630 and SDM660 in the SPM driver, which
will enable the introduction of proper voltage scaling of the CPU
subsystem.
Support for releasing secondary CPUs on MSM8226 is introduced.
The Asynchronous Packet Router (APR) driver is extended to support the
new Generic Packet Router (GPR) variant, which is used to communicate
with the firmware in the new AudioReach audio driver.
Lastly it transitions a number of drivers to safer string functions, as
well as switching things to use devm_platform_ioremap_resource().
* tag 'qcom-drivers-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (40 commits)
soc: qcom: apr: Add GPR support
soc: dt-bindings: qcom: add gpr bindings
soc: qcom: apr: make code more reuseable
soc: dt-bindings: qcom: apr: deprecate qcom,apr-domain property
soc: dt-bindings: qcom: apr: convert to yaml
dt-bindings: soc: qcom: aoss: Delete unused power-domain definitions
dt-bindings: msm/dp: Remove aoss-qmp header
soc: qcom: aoss: Drop power domain support
dt-bindings: soc: qcom: aoss: Drop the load state power-domain
soc: qcom: smp2p: Add wakeup capability to SMP2P IRQ
dt-bindings: power: rpmpd: Add SM6350 to rpmpd binding
dt-bindings: soc: qcom: aoss: Add SM6350 compatible
soc: qcom: llcc: Disable MMUHWT retention
soc: qcom: smd-rpm: Add QCM2290 compatible
dt-bindings: soc: qcom: smd-rpm: Add QCM2290 compatible
firmware: qcom_scm: Add compatible for MSM8953 SoC
dt-bindings: firmware: qcom-scm: Document msm8953 bindings
soc: qcom: pdr: Prefer strscpy over strcpy
soc: qcom: rpmh-rsc: Make use of the helper function devm_platform_ioremap_resource_byname()
soc: qcom: gsbi: Make use of the helper function devm_platform_ioremap_resource()
...
Link: https://lore.kernel.org/r/20211012173442.1017010-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
SRAM driver often returns -EPROBE_DEFER and thus this bus driver often
prints error message, even if it probes successfully later. This is
confusing for users and they often think that something is wrong.
Use dev_err_probe() helper for printing error message. It handles
-EPROBE_DEFER automatically.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20211010071812.145178-1-jernej.skrabec@gmail.com
When OP-TEE driver is built as a module, OP-TEE client devices
registered on TEE bus during probe should be unregistered during
optee_remove. So implement optee_unregister_devices() accordingly.
Fixes: c3fa24af9244 ("tee: optee: add TEE bus device enumeration support")
Reported-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Changes for ti-sysc driver for improved system suspend and resume
support as some drivers need to be reinitialized on resume. Also
a non-urgent resume warning fix, and dropping of legacy flags for
gpio and sham:
- Fix timekeeping suspended warning on resume. Probably no need to merge
this into fixes as it's gone unnoticed for a while.
- Check for context loss for reinit of a module
- Add add quirk handling to reinit on context loss, and also fix a
build warning it caused
- Add quirk handling to reset on reinit
- Use context loss quirk for gpmc and otg
- Handle otg force-idle quirk even if no driver is loaded
- Drop legacy flags for gpio and sham
-----BEGIN PGP SIGNATURE-----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=nwPV
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=2uHl
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.16/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/drivers
Driver changes for ti-sysc for v5.16
Changes for ti-sysc driver for improved system suspend and resume
support as some drivers need to be reinitialized on resume. Also
a non-urgent resume warning fix, and dropping of legacy flags for
gpio and sham:
- Fix timekeeping suspended warning on resume. Probably no need to merge
this into fixes as it's gone unnoticed for a while.
- Check for context loss for reinit of a module
- Add add quirk handling to reinit on context loss, and also fix a
build warning it caused
- Add quirk handling to reset on reinit
- Use context loss quirk for gpmc and otg
- Handle otg force-idle quirk even if no driver is loaded
- Drop legacy flags for gpio and sham
* tag 'omap-for-v5.16/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Fix variable set but not used warning for reinit_modules
bus: ti-sysc: Drop legacy quirk flag for sham
bus: ti-sysc: Drop legacy quirk flag for gpio
bus: ti-sysc: Handle otg force idle quirk
bus: ti-sysc: Use context lost quirk for otg
bus: ti-sysc: Use context lost quirks for gpmc
bus: ti-sysc: Add quirk handling for reset on re-init
bus: ti-sysc: Add quirk handling for reinit on context lost
bus: ti-sysc: Check for lost context in sysc_reinit_module()
bus: ti-sysc: Fix timekeeping_suspended warning on resume
Link: https://lore.kernel.org/r/pull-1633950030-501948@atomide.com-2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Renesas RPC: fix unaligned bus access and QSPI data transfers in
manual modes.
2. Renesas RPC: select RESET_CONTROLLER as it is necessary for
operation.
3. FSL IFC: fix error paths.
4. Broadcom: allow building as module.
-----BEGIN PGP SIGNATURE-----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=ZsTv
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=OOXj
-----END PGP SIGNATURE-----
Merge tag 'memory-controller-drv-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers
Memory controller drivers for v5.16
1. Renesas RPC: fix unaligned bus access and QSPI data transfers in
manual modes.
2. Renesas RPC: select RESET_CONTROLLER as it is necessary for
operation.
3. FSL IFC: fix error paths.
4. Broadcom: allow building as module.
* tag 'memory-controller-drv-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: fsl_ifc: fix leak of irq and nand_irq in fsl_ifc_ctrl_probe
memory: renesas-rpc-if: RENESAS_RPCIF should select RESET_CONTROLLER
memory: brcmstb_dpfe: Allow building Broadcom STB DPFE as module
memory: samsung: describe drivers in KConfig
memory: renesas-rpc-if: Avoid unaligned bus access for HyperFlash
memory: renesas-rpc-if: Correct QSPI data transfer in Manual mode
dt-bindings: rpc: renesas-rpc-if: Add support for the R8A779A0 RPC-IF
Link: https://lore.kernel.org/r/20211010175836.13302-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add MT8195 support to the Mediatek SMI memory controller driver. This
brings also several cleanups and minor enhancements before adding actual
new device support.
-----BEGIN PGP SIGNATURE-----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=mga+
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFkDLYACgkQmmx57+YA
GNlQoxAAg6UiMSe7Ew8SXPEciwvdzt+uOOaNCDgyR6HOEYtOyQjNe2BZk+5blpTV
LVDD0iG4CujyY70zsboBGqYRrfXjPWzdwt37/1WHT5r6AWtKKbAFfhwg5ixE7xh7
pFVFp07mMYZVFHWwNCmuG7UPD9cOZuixXiMMB7KWUHSa8/Y+CaU5OTSA0j83ksut
8bRJT7fzd4mD2UJUqxb50/UsuHHs+9f8xe+aY7FqUfmqpozDnSmQmCowbE9OUYjA
4E1xOtn9MFS8cX1enBdcB2gHuK81RxhYNUnxW/BZfu1y/t7hpn/Akun/XI4czneE
7GPniw3wmcqtgkkJh1SdwbJCIm9nAqX2ldKKUv85XSAncuHx5JOxc6efEBS0uo8x
M3XDm7DR8UXVTWJd4TtEoyD/i81mpZaccpaKKscSyPXU/wsHIFxNwmJAUvqpFDy0
WRP7o6N+ckIQZE1l+jhPTEk2W3uK9TmD6GvKpfIKCsE8ro5Vsps4bAHLERVezom1
Aeunk8FrxkueO8Pv1zL6tsdOMB+UK0kYv+FaQGRRZAWdl2UPt1Q2J/v5t0kxbrCo
oeAHdnER+rjN2tI5POmhjkV+FJKGcJU7pX+OGvVGaFjhtJiK1/D925Bz4HZmRYGu
WxVK7lWy0jcdQNb9uTsfCb6LeZGiVMo5f+6o8UT6Wt9Mn6HjJhg=
=HHse
-----END PGP SIGNATURE-----
Merge tag 'memory-controller-drv-mtk-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers
Memory controller drivers for v5.14 - Mediatek
Add MT8195 support to the Mediatek SMI memory controller driver. This
brings also several cleanups and minor enhancements before adding actual
new device support.
* tag 'memory-controller-drv-mtk-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
MAINTAINERS: Add entry for MediaTek SMI
memory: mtk-smi: mt8195: Add initial setting for smi-larb
memory: mtk-smi: mt8195: Add initial setting for smi-common
memory: mtk-smi: mt8195: Add smi support
memory: mtk-smi: Use devm_platform_ioremap_resource
memory: mtk-smi: Add clocks for smi-sub-common
memory: mtk-smi: Add device link for smi-sub-common
memory: mtk-smi: Add error handle for smi_probe
memory: mtk-smi: Adjust some code position
memory: mtk-smi: Rename smi_gen to smi_type
memory: mtk-smi: Use clk_bulk clock ops
dt-bindings: memory: mediatek: Add mt8195 smi sub common
dt-bindings: memory: mediatek: Add mt8195 smi binding
Link: https://lore.kernel.org/r/20211010175836.13302-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pulls in the for-5.16/clk and for-5.16/soc branches and uses the
stubs added in them to enable compile testing of the cpuidle driver.
While at it, this also fixes a potential driver probe order race
condition between the PMC and the cpuidle driver.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmFgoa0THHRyZWRpbmdA
bnZpZGlhLmNvbQAKCRDdI6zXfz6zoT0ED/9o8TlRPVZvojuMoA80lMKSyoWPtIR2
39OBKyhwH5zKzACa2a5LzpVQEZRbEsRvTeADYfMyJOSDyLzoN1R1I3tlPHbW41df
rt6HF7zZ68que5peSKHUECZzLveWsNHkRI4dKLoIcD4RAZPo32X8Edx+EUwWwXO5
6PwRFzjx9IMyARsNLmMK0FBqhdGb3jQ8XkNN7u+FSzZ9YVCM0rM5orc2TJoOY074
YGNl72bcvYvm7FSpQmd5SeXONZOEfJCz0PV7kZhSroFF8JB92NvOL1oDnDswggAh
Se0gjD4XmdDuB1Kvh+WFleTnKLDgWhZX7XbljxzprPgf9MNlMCmoDyK+Qp3MDGiT
ZWgQdJALJ9gmlb+993oj4SJLrWEgETM7nSllEZ/vlB1bQ6TLFc4x78MizWwHv2R+
kdljGAU34WcuvJr+0jwjSyqG9eGFJolgCNXS5uMJjS5TNhgVXQ/f8+E7geu6xLQb
BqquII96MS7NqsTdluPEdRS2/7hLiETpJvFPw0HEIgQGO5jkv8VVBY01Od5KaVqt
cHwW2NqATZ43YT7zNekDq6lxl76mCr458Eb6rQOgAz/raeDwu1bOFwbKdBOqwqKl
8M9p8dyABinmKT62q+WQMOXx9UxGrpAtMt8VOIHRhyiCZFAPW/TnXSKJ8G6jrp2/
TA33DrK9apP5lg==
=+75w
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=rDtb
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.16-cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
cpuidle: tegra: Changes for v5.16-rc1
This pulls in the for-5.16/clk and for-5.16/soc branches and uses the
stubs added in them to enable compile testing of the cpuidle driver.
While at it, this also fixes a potential driver probe order race
condition between the PMC and the cpuidle driver.
* tag 'tegra-for-5.16-cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
cpuidle: tegra: Check whether PMC is ready
cpuidle: tegra: Enable compile testing
clk: tegra: Add stubs needed for compile testing
Link: https://lore.kernel.org/r/20211008201132.1678814-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This set consists of stub additions to enable compile testing for more
drivers, exposes the PMC's USB regmap on all SoC generations, removes a
state synchronization workaround that is no longer needed and adds an
error reporting driver that can help troubleshoot crashes.
To top it all off, an error handling path in the powergating code is
fixed and the devm_platform_ioremap_resource() function is used to
remove some boilerplate code.
-----BEGIN PGP SIGNATURE-----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=79h+
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=DXSR
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.16-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
soc/tegra: Changes for v5.16-rc1
This set consists of stub additions to enable compile testing for more
drivers, exposes the PMC's USB regmap on all SoC generations, removes a
state synchronization workaround that is no longer needed and adds an
error reporting driver that can help troubleshoot crashes.
To top it all off, an error handling path in the powergating code is
fixed and the devm_platform_ioremap_resource() function is used to
remove some boilerplate code.
* tag 'tegra-for-5.16-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Use devm_platform_ioremap_resource()
soc/tegra: Add Tegra186 ARI driver
soc/tegra: Fix an error handling path in tegra_powergate_power_up()
soc/tegra: pmc: Expose USB regmap to all SoCs
soc/tegra: pmc: Disable PMC state syncing
soc/tegra: pm: Make stubs usable for compile testing
soc/tegra: irq: Add stubs needed for compile testing
soc/tegra: fuse: Add stubs needed for compile testing
Link: https://lore.kernel.org/r/20211008201132.1678814-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This contains a fix for a stack usage problem that was causing build
failures on 32-bit ARM and a minor janitorial cleanup.
-----BEGIN PGP SIGNATURE-----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=JReQ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=fzM3
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.16-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
firmware: tegra: Changes for v5.16-rc1
This contains a fix for a stack usage problem that was causing build
failures on 32-bit ARM and a minor janitorial cleanup.
* tag 'tegra-for-5.16-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: bpmp: Use devm_platform_ioremap_resource()
firmware: tegra: Reduce stack usage
Link: https://lore.kernel.org/r/20211008201132.1678814-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- soc: amlogic: meson-gx-socinfo: Add the SOC ID for the S905Y2 used in the Radxa Zero
- soc: amlogic: meson-clk-measure/canvas: Make use of devm_platform_ioremap_resource()
-----BEGIN PGP SIGNATURE-----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=hK3p
-----END PGP SIGNATURE-----
Merge tag 'amlogic-drivers-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/drivers
Amlogic Drivers updates for v5.16:
Minor cleanups, and the addition of the S905Y2 SoC ID
* tag 'amlogic-drivers-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
soc: amlogic: meson-clk-measure: Make use of the helper function devm_platform_ioremap_resource()
soc: amlogic: canvas: Make use of the helper function devm_platform_ioremap_resource()
soc: amlogic: meson-gx-socinfo: Add S905Y2 ID for Radxa Zero
Link: https://lore.kernel.org/r/f8e020d3-29f7-0745-3864-01975edd20f7@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use the devm_platform_ioremap_resource() helper instead of calling
platform_get_resource() and devm_ioremap_resource() separately.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a driver to hook into panic notifiers and print machine check
status for debugging. Status information is retrieved via SMC. This
is supported by upstream ARM Trusted Firmware.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reset dsi0 HW to default when power on. This prevents to have different
settingis between the bootloader and the kernel.
As not all Mediatek boards have the reset consumer configured in their
board description, also is not needed on all of them, the reset is optional,
so the change is compatible with all boards.
Cc: Jitao Shi <jitao.shi@mediatek.com>
Suggested-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20210930103105.v4.7.Idbb4727ddf00ba2fe796b630906baff10d994d89@changeid
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Among other features the mmsys driver should implement a reset
controller to be able to reset different bits from their space.
Cc: Jitao Shi <jitao.shi@mediatek.com>
Suggested-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20210930103105.v4.6.I15e2419141a69b2e5c7e700c34d92a69df47e04d@changeid
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add mtk mutex support for MT8192 SoC.
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://lore.kernel.org/r/20210930155222.5861-5-yongqiang.niu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Use the devm_platform_ioremap_resource() helper instead of calling
platform_get_resource() and devm_ioremap_resource() separately.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Building the bpmp-debugfs driver for Arm results in a warning for stack usage:
drivers/firmware/tegra/bpmp-debugfs.c:321:16: error: stack frame size of 1224 bytes in function 'bpmp_debug_store' [-Werror,-Wframe-larger-than=]
static ssize_t bpmp_debug_store(struct file *file, const char __user *buf,
It should be possible to rearrange the code to not require two separate
buffers for the file name, but the easiest workaround is to use dynamic
allocation.
Fixes: 5e37b9c137ee ("firmware: tegra: Add support for in-band debug")
Link: https://lore.kernel.org/all/20201204193714.3134651-1-arnd@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[treding@nvidia.com: consistently return NULL on failure]
Signed-off-by: Thierry Reding <treding@nvidia.com>
The error handling code of fsl_ifc_ctrl_probe is problematic. When
fsl_ifc_ctrl_init fails or request_irq of fsl_ifc_ctrl_dev->irq fails,
it forgets to free the irq and nand_irq. Meanwhile, if request_irq of
fsl_ifc_ctrl_dev->nand_irq fails, it will still free nand_irq even if
the request_irq is not successful.
Fix this by refactoring the error handling code.
Fixes: d2ae2e20fbdd ("driver/memory:Move Freescale IFC driver to a common driver")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Link: https://lore.kernel.org/r/20210925151434.8170-1-mudongliangabcd@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
fix debugfs_simple_attr.cocci warning:
drivers/memory/tegra/tegra210-emc-core.c:1665:0-23: WARNING:tegra210_emc_debug_min_rate_fops
should be defined with DEFINE_DEBUGFS_ATTRIBUTE
Commit 6fc5f1adf5a1 ("memory: tegra210-emc: replace
DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE") fixed the same
warning, but didn't fix all matches in this file at once.
Signed-off-by: Kai Song <songkai01@inspur.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211005043514.9650-1-songkai01@inspur.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
The Renesas RPC-IF driver calls devm_reset_control_get_exclusive(),
which returns -ENOTSUPP if CONFIG_RESET_CONTROLLER is not enabled.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/e443aa66d146da5646b7ebece8876545b8621063.1633447756.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Return the error code when command fails.
Fixes: 13324edbe926 ("memory: tegra186-emc: Handle errors in BPMP response")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Link: https://lore.kernel.org/r/20210928021545.3774677-1-yangyingliang@huawei.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
