IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
To be able to use netdevsim for tc-testing with an offloaded tc-taprio
schedule, it needs to report a PTP clock (which it now does), and to
accept ndo_setup_tc(TC_SETUP_QDISC_TAPRIO) calls.
Since netdevsim has no packet I/O, this doesn't do anything intelligent,
it only allows taprio offload code paths to go through some level of
automated testing.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-9-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I'd like to make netdevsim offload tc-taprio, but currently, this Qdisc
emits a ETHTOOL_GET_TS_INFO call to the driver to make sure that it has
a PTP clock, so that it is reasonably capable of offloading the schedule.
By using the mock PHC driver, that becomes possible.
Hardware timestamping is not necessary, and netdevsim does not support
packet I/O anyway.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-8-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are several cases where virtual net devices may benefit from
having a PTP clock, and these have to do with testing. I can see at
least netdevsim and veth as potential users of a common mock-up PTP
hardware clock driver.
The proposed idea is to create an object which emulates PTP clock
operations on top of the unadjustable CLOCK_MONOTONIC_RAW plus a
software-controlled time domain via a timecounter/cyclecounter and then
link that PHC to the netdevsim device.
The driver is fully functional for its intended purpose, and it
successfully passes the PTP selftests.
$ cd tools/testing/selftests/ptp/
$ ./phc.sh /dev/ptp2
TEST: settime [ OK ]
TEST: adjtime [ OK ]
TEST: adjfreq [ OK ]
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-7-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This makes a difference for the software scheduling mode, where
dev_queue->qdisc_sleeping is the same as the taprio root Qdisc itself,
but when we're talking about what Qdisc and stats get reported for a
traffic class, the root taprio isn't what comes to mind, but q->qdiscs[]
is.
To understand the difference, I've attempted to send 100 packets in
software mode through class 8001:5, and recorded the stats before and
after the change.
Here is before:
$ tc -s class show dev eth0
class taprio 8001:1 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:2 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:3 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:4 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:5 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:6 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:7 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:8 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
and here is after:
class taprio 8001:1 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:2 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:3 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:4 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:5 root
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:6 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:7 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:8 root leaf 800d:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
The most glaring (and expected) difference is that before, all class
stats reported the global stats, whereas now, they really report just
the counters for that traffic class.
Finally, Pedro Tammela points out that there is a tc selftest which
checks specifically which handle do the child Qdiscs corresponding to
each class have. That's changing here - taprio no longer reports
tcm->tcm_info as the same handle "1:" as itself (the root Qdisc), but 0
(the handle of the default pfifo child Qdiscs). Since iproute2 does not
print a child Qdisc handle of 0, adjust the test's expected output.
Link: https://lore.kernel.org/netdev/3b83fcf6-a5e8-26fb-8c8a-ec34ec4c3342@mojatatu.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-6-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As mentioned in commit af7b29b1deaa ("Revert "net/sched: taprio: make
qdisc_leaf() see the per-netdev-queue pfifo child qdiscs"") - unlike
mqprio, taprio doesn't use q->qdiscs[] only as a temporary transport
between Qdisc_ops :: init() and Qdisc_ops :: attach().
Delete the comment, which is just stolen from mqprio, but there, the
usage patterns are a lot different, and this is nothing but confusing.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is another stab at commit 1461d212ab27 ("net/sched: taprio: make
qdisc_leaf() see the per-netdev-queue pfifo child qdiscs"), later
reverted in commit af7b29b1deaa ("Revert "net/sched: taprio: make
qdisc_leaf() see the per-netdev-queue pfifo child qdiscs"").
I believe that the problems that caused the revert were fixed, and thus,
this change is identical to the original patch.
Its purpose is to properly reject attaching a software taprio child
qdisc to a software taprio parent. Because unoffloaded taprio currently
reports itself (the root Qdisc) as the return value from qdisc_leaf(),
then the process of attaching another taprio as child to a Qdisc class
of the root will just result in a Qdisc_ops :: change() call for the
root. Whereas that's not we want. We want Qdisc_ops :: init() to be
called for the taprio child, in order to give the taprio child a chance
to check whether its sch->parent is TC_H_ROOT or not (and reject this
configuration).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Normally, Qdiscs have one reference on them held by their owner and one
held for each TXQ to which they are attached, however this is not the
case with the children of an offloaded taprio. Instead, the taprio qdisc
currently lives in the following fragile equilibrium.
In the software scheduling case, taprio attaches itself (the root Qdisc)
to all TXQs, thus having a refcount of 1 + the number of TX queues. In
this mode, the q->qdiscs[] children are not visible directly to the
Qdisc API. The lifetime of the Qdiscs from this private array lasts
until qdisc_destroy() -> taprio_destroy().
In the fully offloaded case, the root taprio has a refcount of 1, and
all child q->qdiscs[] also have a refcount of 1. The child q->qdiscs[]
are attached to the netdev TXQs directly and thus are visible to the
Qdisc API, however taprio loses a reference to them very early - during
qdisc_graft(parent==NULL) -> taprio_attach(). At that time, taprio frees
the q->qdiscs[] array to not leak memory, but interestingly, it does not
release a reference on these qdiscs because it doesn't effectively own
them - they are created by taprio but owned by the Qdisc core, and will
be freed by qdisc_graft(parent==NULL, new==NULL) -> qdisc_put(old) when
the Qdisc is deleted or when the child Qdisc is replaced with something
else.
My interest is to change this equilibrium such that taprio also owns a
reference on the q->qdiscs[] child Qdiscs for the lifetime of the root
Qdisc, including in full offload mode. I want this because I would like
taprio_leaf(), taprio_dump_class(), taprio_dump_class_stats() to have
insight into q->qdiscs[] for the software scheduling mode - currently
they look at dev_queue->qdisc_sleeping, which is, as mentioned, the same
as the root taprio.
The following set of changes is necessary:
- don't free q->qdiscs[] early in taprio_attach(), free it late in
taprio_destroy() for consistency with software mode. But:
- currently that's not possible, because taprio doesn't own a reference
on q->qdiscs[]. So hold that reference - once during the initial
attach() and once during subsequent graft() calls when the child is
changed.
- always keep track of the current child in q->qdiscs[], even for full
offload mode, so that we free in taprio_destroy() what we should, and
not something stale.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a simple code transformation with no intended behavior change,
just to make it absolutely clear that q->qdiscs[] is only attached to
the child taprio classes in full offload mode.
Right now we use the q->qdiscs[] variable in taprio_attach() for
software mode too, but that is quite confusing and avoidable. We use
it only to reach the netdev TX queue, but we could as well just use
netdev_get_tx_queue() for that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Saeed Mahameed says:
====================
mlx5: Expose NIC temperature via hwmon API
Expose NIC temperature by implementing hwmon kernel API, which turns
current thermal zone kernel API to redundant.
For each one of the supported and exposed thermal diode sensors, expose
the following attributes:
1) Input temperature.
2) Highest temperature.
3) Temperature label.
4) Temperature critical max value:
refers to the high threshold of Warning Event. Will be exposed as
`tempY_crit` hwmon attribute (RO attribute). For example for
ConnectX5 HCA's this temperature value will be 105 Celsius, 10
degrees lower than the HW shutdown temperature).
5) Temperature reset history: resets highest temperature.
====================
Link: https://lore.kernel.org/r/20230807180507.22984-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Expose NIC temperature by implementing hwmon kernel API, which turns
current thermal zone kernel API to redundant.
For each one of the supported and exposed thermal diode sensors, expose
the following attributes:
1) Input temperature.
2) Highest temperature.
3) Temperature label:
Depends on the firmware capability, if firmware doesn't support
sensors naming, the fallback naming convention would be: "sensorX",
where X is the HW spec (MTMP register) sensor index.
4) Temperature critical max value:
refers to the high threshold of Warning Event. Will be exposed as
`tempY_crit` hwmon attribute (RO attribute). For example for
ConnectX5 HCA's this temperature value will be 105 Celsius, 10
degrees lower than the HW shutdown temperature).
5) Temperature reset history: resets highest temperature.
For example, for dualport ConnectX5 NIC with a single IC thermal diode
sensor will have 2 hwmon directories (one for each PCI function)
under "/sys/class/hwmon/hwmon[X,Y]".
Listing one of the directories above (hwmonX/Y) generates the
corresponding output below:
$ grep -H -d skip . /sys/class/hwmon/hwmon0/*
Output
=======================================================================
/sys/class/hwmon/hwmon0/name:mlx5
/sys/class/hwmon/hwmon0/temp1_crit:105000
/sys/class/hwmon/hwmon0/temp1_highest:48000
/sys/class/hwmon/hwmon0/temp1_input:46000
/sys/class/hwmon/hwmon0/temp1_label:asic
grep: /sys/class/hwmon/hwmon0/temp1_reset_history: Permission denied
In addition, displaying the sensors data via lm_sensors generates the
corresponding output below:
$ sensors
Output
=======================================================================
mlx5-pci-0800
Adapter: PCI adapter
asic: +46.0°C (crit = +105.0°C, highest = +48.0°C)
mlx5-pci-0801
Adapter: PCI adapter
asic: +46.0°C (crit = +105.0°C, highest = +48.0°C)
CC: Jean Delvare <jdelvare@suse.com>
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230807180507.22984-3-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make mlx5_query_module_num() defined in port.c, a non-static, so it can
be used by other files.
CC: Jean Delvare <jdelvare@suse.com>
CC: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230807180507.22984-2-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I'm looking to enable -Wmissing-variable-declarations behind W=1. 0day
bot spotted the following instances:
net/llc/llc_conn.c:44:5: warning: no previous extern declaration for
non-static variable 'sysctl_llc2_ack_timeout'
[-Wmissing-variable-declarations]
44 | int sysctl_llc2_ack_timeout = LLC2_ACK_TIME * HZ;
| ^
net/llc/llc_conn.c:44:1: note: declare 'static' if the variable is not
intended to be used outside of this translation unit
44 | int sysctl_llc2_ack_timeout = LLC2_ACK_TIME * HZ;
| ^
net/llc/llc_conn.c:45:5: warning: no previous extern declaration for
non-static variable 'sysctl_llc2_p_timeout'
[-Wmissing-variable-declarations]
45 | int sysctl_llc2_p_timeout = LLC2_P_TIME * HZ;
| ^
net/llc/llc_conn.c:45:1: note: declare 'static' if the variable is not
intended to be used outside of this translation unit
45 | int sysctl_llc2_p_timeout = LLC2_P_TIME * HZ;
| ^
net/llc/llc_conn.c:46:5: warning: no previous extern declaration for
non-static variable 'sysctl_llc2_rej_timeout'
[-Wmissing-variable-declarations]
46 | int sysctl_llc2_rej_timeout = LLC2_REJ_TIME * HZ;
| ^
net/llc/llc_conn.c:46:1: note: declare 'static' if the variable is not
intended to be used outside of this translation unit
46 | int sysctl_llc2_rej_timeout = LLC2_REJ_TIME * HZ;
| ^
net/llc/llc_conn.c:47:5: warning: no previous extern declaration for
non-static variable 'sysctl_llc2_busy_timeout'
[-Wmissing-variable-declarations]
47 | int sysctl_llc2_busy_timeout = LLC2_BUSY_TIME * HZ;
| ^
net/llc/llc_conn.c:47:1: note: declare 'static' if the variable is not
intended to be used outside of this translation unit
47 | int sysctl_llc2_busy_timeout = LLC2_BUSY_TIME * HZ;
| ^
These symbols are referenced by more than one translation unit, so make
include the correct header for their declarations. Finally, sort the
list of includes to help keep them tidy.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/llvm/202308081000.tTL1ElTr-lkp@intel.com/
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230808-llc_static-v1-1-c140c4c297e4@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IPV6_ADDRFORM socket option is evil, because it can change sock->ops
while other threads might read it. Same issue for sk->sk_family
being set to AF_INET.
Adding READ_ONCE() over sock->ops reads is needed for sockets
that might be impacted by IPV6_ADDRFORM.
Note that mptcp_is_tcpsk() can also overwrite sock->ops.
Adding annotations for all sk->sk_family reads will require
more patches :/
BUG: KCSAN: data-race in ____sys_sendmsg / do_ipv6_setsockopt
write to 0xffff888109f24ca0 of 8 bytes by task 4470 on cpu 0:
do_ipv6_setsockopt+0x2c5e/0x2ce0 net/ipv6/ipv6_sockglue.c:491
ipv6_setsockopt+0x57/0x130 net/ipv6/ipv6_sockglue.c:1012
udpv6_setsockopt+0x95/0xa0 net/ipv6/udp.c:1690
sock_common_setsockopt+0x61/0x70 net/core/sock.c:3663
__sys_setsockopt+0x1c3/0x230 net/socket.c:2273
__do_sys_setsockopt net/socket.c:2284 [inline]
__se_sys_setsockopt net/socket.c:2281 [inline]
__x64_sys_setsockopt+0x66/0x80 net/socket.c:2281
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffff888109f24ca0 of 8 bytes by task 4469 on cpu 1:
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
____sys_sendmsg+0x349/0x4c0 net/socket.c:2503
___sys_sendmsg net/socket.c:2557 [inline]
__sys_sendmmsg+0x263/0x500 net/socket.c:2643
__do_sys_sendmmsg net/socket.c:2672 [inline]
__se_sys_sendmmsg net/socket.c:2669 [inline]
__x64_sys_sendmmsg+0x57/0x60 net/socket.c:2669
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0xffffffff850e32b8 -> 0xffffffff850da890
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 4469 Comm: syz-executor.1 Not tainted 6.4.0-rc5-syzkaller-00313-g4c605260bc60 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230808135809.2300241-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Li Zetao says:
====================
Remove redundant functions and use generic functions
This patch set removes some redundant functions. In the network module,
two generic functions are provided to convert u64 value and Ethernet
MAC address. Using generic functions helps reduce redundant code and
improve code readability.
====================
Link: https://lore.kernel.org/r/20230808114504.4036008-1-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The rvu_npc_exact_mac2u64() is used to convert an Ethernet MAC address
into a u64 value, as this is exactly what ether_addr_to_u64() does.
Use ether_addr_to_u64() to replace the rvu_npc_exact_mac2u64().
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Acked-by: Geethasowjanya Akula <gakula@marvell.com>
Link: https://lore.kernel.org/r/20230808114504.4036008-4-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use u64_to_ether_addr() to convert a u64 value to an Ethernet MAC address,
instead of directly calculating, as this is exactly what this
function does.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Acked-by: Geethasowjanya Akula <gakula@marvell.com>
Link: https://lore.kernel.org/r/20230808114504.4036008-3-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mac2u64() is used to convert an Ethernet MAC address into a u64 value,
as this is exactly what ether_addr_to_u64() does. Similarly, the cfg2mac()
is also the case. Use ether_addr_to_u64() and u64_to_ether_addr() instead
of these two.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Acked-by: Geethasowjanya Akula <gakula@marvell.com>
Link: https://lore.kernel.org/r/20230808114504.4036008-2-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata says:
====================
mlxsw: Set port STP state on bridge enslavement
When the first port joins a LAG that already has a bridge upper, an
instance of struct mlxsw_sp_bridge_port is created for the LAG to keep
track of it as a bridge port. The bridge_port's STP state is initialized to
BR_STATE_DISABLED. This made sense previously, because mlxsw would only
ever allow a port to join a LAG if the LAG had no uppers. Thus if a
bridge_port was instantiated, it must have been because the LAG as such is
joining a bridge, and the STP state is correspondingly disabled.
However as of commit 2c5ffe8d7226 ("mlxsw: spectrum: Permit enslavement to
netdevices with uppers"), mlxsw allows a port to join a LAG that is already
a member of a bridge. The STP state may be different than disabled in that
case. Initialize it properly by querying the actual state.
This bug may cause an issue as traffic on ports attached to a bridged LAG
gets dropped on ingress with discard_ingress_general counter bumped.
The above fix in patch #1. Patch #2 contains a selftest that would
sporadically reproduce the issue.
====================
Link: https://lore.kernel.org/r/cover.1691498735.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the first port joins a LAG that already has a bridge upper, an
instance of struct mlxsw_sp_bridge_port is created for the LAG to keep
track of it as a bridge port. The bridge_port's STP state is initialized to
BR_STATE_DISABLED. This made sense previously, because mlxsw would only
ever allow a port to join a LAG if the LAG had no uppers. Thus if a
bridge_port was instantiated, it must have been because the LAG as such is
joining a bridge, and the STP state is correspondingly disabled.
However as of commit 2c5ffe8d7226 ("mlxsw: spectrum: Permit enslavement to
netdevices with uppers"), mlxsw allows a port to join a LAG that is already
a member of a bridge. The STP state may be different than disabled in that
case. Initialize it properly by querying the actual state.
This bug may cause an issue as traffic on ports attached to a bridged LAG
gets dropped on ingress with discard_ingress_general counter bumped.
Fixes: c6514f3627a0 ("Merge branch 'mlxsw-enslavement'")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/39f4a5781050866b4132f350d7d8cf7ab23ea070.1691498735.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use ether_addr_to_u64() to convert an Ethernet address into a u64 value,
instead of directly calculating, as this is exactly what
this function does.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230808113849.4033657-1-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XfrS
-----END PGP SIGNATURE-----
Merge tag 'nf-next-2023-08-08' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter updates for net-next
First 4 Patches, from Yue Haibing, remove unused prototypes in
various netfilter headers.
Last patch makes nfnetlink_log to always include a packet timestamp,
up to now it was only included if the skb had assigned previously.
From Maciej Żenczykowski.
* tag 'nf-next-2023-08-08' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nfnetlink_log: always add a timestamp
netfilter: h323: Remove unused function declarations
netfilter: conntrack: Remove unused function declarations
netfilter: helper: Remove unused function declarations
netfilter: gre: Remove unused function declaration nf_ct_gre_keymap_flush()
====================
Link: https://lore.kernel.org/r/20230808124159.19046-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use is_zero_ether_addr() instead of ether_addr_equal()
to check if the ethernet address is all zeros.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20230808133528.4083501-1-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 6bc506b4fb06 ("bridge: switchdev: Add forward mark support for stacked devices")
removed the implementation but leave declaration.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20230808145955.2176-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 1e2dc14509fd ("net: ethtool: Add helpers for reporting test results")
declared but never implemented these function.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230808144610.19096-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If we successfully parsed an interface mode with a legacy switch
driver, populate that mode into phylink's supported interfaces rather
than defaulting to the internal and gmii interfaces.
This hasn't caused an issue so far, because when the interface doesn't
match a supported one, phylink_validate() doesn't clear the supported
mask, but instead returns -EINVAL. phylink_parse_fixedlink() doesn't
check this return value, and merely relies on the supported ethtool
link modes mask being cleared. Therefore, the fixed link settings end
up being allowed despite validation failing.
Before this causes a problem, arrange for DSA to more accurately
populate phylink's supported interfaces mask so validation can
correctly succeed.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/E1qTKdM-003Cpx-Eh@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When dont-validate flags are filtered out for do/dump op, the list may
be empty. In that case, avoid rendering the validate field.
Fixes: fa8ba3502ade ("ynl-gen-c.py: render netlink policies static for split ops")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230808090344.1368874-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PCI core API pci_dev_id() can be used to get the BDF number for a pci
device. We don't need to compose it manually. Use pci_dev_id() to
simplify the code a little bit.
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Reviewed-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230808024931.147048-1-wangxiongfeng2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The platform_register_drivers() will set "THIS_MODULE" to driver.owner when
register a platform_driver driver, so it is redundant initialization to set
driver.owner in the statement. Remove it for clean code.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://lore.kernel.org/r/20230808014702.2712699-1-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 526669866140 ("tipc: let broadcast packet reception use new link receive function")
declared but never implemented this.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230807142926.45752-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Different MT7530 variants require different PHY drivers.
Use 'imply' instead of 'select' to relax the dependency on the PHY
driver, and choose the appropriate driver.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Edward Cree says:
====================
sfc: basic conntrack offload
Support offloading tracked connections and matching against them in
TC chains on the PF and on representors.
Later patch serieses will add NAT and conntrack-on-tunnel-netdevs;
keep it simple for now.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Handle the (comparatively) simple case of a -trk rule on an efx netdev
(i.e. not a tunnel decap rule) with ct and goto chain actions.
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parse ct_state trk/est, mark and zone out of flower keys, and plumb
them through to the hardware, performing some minor translations.
Nothing can actually hit them yet as we're not offloading any DO_CT
actions.
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Map it to an 8-bit recirc_id for use by the hardware.
Currently nothing in the driver is offloading 'goto chain' actions,
so these rules cannot yet be hit.
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
No handling yet for FLOW_ACTION_MANGLE (NAT or NAPT) actions.
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Translate from software struct efx_tc_ct_entry objects to the key
and response bitstrings, and implement insertion and removal of
these entries from the hardware table.
Callers of these functions will be added in subsequent patches.
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bind a stub callback to the netfilter flow table.
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Access to the connection tracking table in EF100 hardware is through
a "generic" table mechanism, whereby a firmware call at probe time
gives the driver a description of the field widths and offsets, so
that the driver can then construct key and response bitstrings at
runtime.
Probe the NIC for this information and populate the needed metadata
into a new meta_ct field of struct efx_tc_state.
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-08-07 (ice)
This series contains updates to ice driver only.
Wojciech allows for LAG interfaces to be used for bridge offloads.
Marcin tracks additional metadata for filtering rules to aid in proper
differentiation of similar rules. He also renames some flags that
do not entirely describe their representation.
Karol and Jan add additional waiting for firmware load on devices that
require it.
Przemek refactors RSS implementation to clarify/simplify configurations.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: clean up __ice_aq_get_set_rss_lut()
ice: add FW load wait
ice: Add get C827 PHY index function
ice: Rename enum ice_pkt_flags values
ice: Add direction metadata
ice: Accept LAG netdevs in bridge offloads
====================
Link: https://lore.kernel.org/r/20230807204835.3129164-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1) Few cleanups
2) Dynamic completion EQs
The driver creates completion EQs for all vectors directly on driver
load, even if those EQs will not be utilized later on.
To allow more flexibility in managing completion EQs and to reduce the
memory overhead of driver load, this series will adjust completion EQs
creation to be dynamic. Meaning, completion EQs will be created only
when needed.
Patch #1 introduces a counter for tracking the current number of
completion EQs.
Patches #2-6 refactor the existing infrastructure of managing completion
EQs and completion IRQs to be compatible with per-vector
allocation/release requests.
Patches #7-8 modify the CPU-to-IRQ affinity calculation to be resilient
in case the affinity is requested but completion IRQ is not allocated yet.
Patch #9 function rename.
Patch #10 handles the corner case of SF performing an IRQ request when no
SF IRQ pool is found, and no PF IRQ exists for the same vector.
Patch #11 modify driver to use dynamically allocate completion EQs.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmTRL7AACgkQSD+KveBX
+j69VggA0+5AO3WkMOy6055/HQoSiO/UqdSwyZhedu9nUFtQmmybIkkqghebTZgO
+tLMjSzPjkhtnY70Fybb+MAH2QiOVO7MxMvg99punmhpB1RBYSo7mg2WG/la55A1
E+ocN6uL0Jv2HUXbECSM8OhGOOf6wJNXRk9kzc6AJWsmun356HveaW8n8hp0JCJr
hnqbyPZJjLAYlcXH9jjvseCW7tHZH30WPAoYqVXRMao8LPbvjCWlinw3gntmet0f
746oxkNapZrHj+lHHrmGRr23+pOWZGW0nt8cxJlXHd0yDP116RDDf64gcop92AYX
YWVe8whSb2yp6FcscNtb1Vt5vw/c9w==
=e5aZ
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2023-08-07' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-08-07
1) Few cleanups
2) Dynamic completion EQs
The driver creates completion EQs for all vectors directly on driver
load, even if those EQs will not be utilized later on.
To allow more flexibility in managing completion EQs and to reduce the
memory overhead of driver load, this series will adjust completion EQs
creation to be dynamic. Meaning, completion EQs will be created only
when needed.
Patch #1 introduces a counter for tracking the current number of
completion EQs.
Patches #2-6 refactor the existing infrastructure of managing completion
EQs and completion IRQs to be compatible with per-vector
allocation/release requests.
Patches #7-8 modify the CPU-to-IRQ affinity calculation to be resilient
in case the affinity is requested but completion IRQ is not allocated yet.
Patch #9 function rename.
Patch #10 handles the corner case of SF performing an IRQ request when no
SF IRQ pool is found, and no PF IRQ exists for the same vector.
Patch #11 modify driver to use dynamically allocate completion EQs.
* tag 'mlx5-updates-2023-08-07' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Bridge, Only handle registered netdev bridge events
net/mlx5: E-Switch, Remove redundant arg ignore_flow_lvl
net/mlx5: Fix typo reminder -> remainder
net/mlx5: remove many unnecessary NULL values
net/mlx5: Allocate completion EQs dynamically
net/mlx5: Handle SF IRQ request in the absence of SF IRQ pool
net/mlx5: Rename mlx5_comp_vectors_count() to mlx5_comp_vectors_max()
net/mlx5: Add IRQ vector to CPU lookup function
net/mlx5: Introduce mlx5_cpumask_default_spread
net/mlx5: Implement single completion EQ create/destroy methods
net/mlx5: Use xarray to store and manage completion EQs
net/mlx5: Refactor completion IRQ request/release handlers in EQ layer
net/mlx5: Use xarray to store and manage completion IRQs
net/mlx5: Refactor completion IRQ request/release API
net/mlx5: Track the current number of completion EQs
====================
Link: https://lore.kernel.org/r/20230807175642.20834-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit 82e896d992fa ("docs: net: page_pool: use kdoc to avoid
duplicating the information") I shied away from using the DOC:
comments when moving to kdoc for documenting page_pool API,
because I wasn't sure how familiar people are with it.
Turns out there is already a DOC: comment for the intro, which
is the same in both places, modulo what looks like minor rewording.
Use the version from Documentation/ but keep the contents with
the code.
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20230807210051.1014580-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commitbf9009bf21b5 ("net/fq_impl: drop get_default_func, move default flow to fq_tin")
remove its last user, so can remove it.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230807142111.33524-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When flushing the backlog after decoding a record we don't really
know how much data the caller want us to evaluate, so use INT_MAX
and 0 as arguments to tls_read_flush_backlog() to ensure we flush
at 128k of data. Otherwise we might be reading too much data and
trigger a TCP window full.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20230807071022.10091-1-hare@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Get a coccinelle warning as follows:
net/ipv6/exthdrs.c:800:29-30: WARNING opportunity for swap()
Use swap() to replace opencoded implementation.
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230807020947.1991716-1-william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For now, No matter what error pointer ip_neigh_for_gw() returns,
ip_finish_output2() always return -EINVAL, which may mislead the upper
users.
For exemple, an application uses sendto to send an UDP packet, but when the
neighbor table overflows, sendto() will get a value of -EINVAL, and it will
cause users to waste a lot of time checking parameters for errors.
Return the real errno instead of -EINVAL.
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Cc: Si Hao <si.hao@zte.com.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://lore.kernel.org/r/20230807015408.248237-1-xu.xin16@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
