IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
In canfd_rcv(), cfd->len is uninitialized when skb->len = 0, and this
uninitialized cfd->len is accessed nonetheless by pr_warn_once().
Fix this uninitialized variable access by checking cfd->len's validity
condition (cfd->len > CANFD_MAX_DLEN) separately after the skb->len's
condition is checked, and appropriately modify the log messages that
are generated as well.
In case either of the required conditions fail, the skb is freed and
NET_RX_DROP is returned, same as before.
Fixes: d4689846881d ("can: af_can: canfd_rcv(): replace WARN_ONCE by pr_warn_once")
Reported-by: syzbot+9bcb0c9409066696d3aa@syzkaller.appspotmail.com
Tested-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Link: https://lore.kernel.org/r/20201103213906.24219-3-anant.thazhemadam@gmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In can_rcv(), cfd->len is uninitialized when skb->len = 0, and this
uninitialized cfd->len is accessed nonetheless by pr_warn_once().
Fix this uninitialized variable access by checking cfd->len's validity
condition (cfd->len > CAN_MAX_DLEN) separately after the skb->len's
condition is checked, and appropriately modify the log messages that
are generated as well.
In case either of the required conditions fail, the skb is freed and
NET_RX_DROP is returned, same as before.
Fixes: 8cb68751c115 ("can: af_can: can_rcv(): replace WARN_ONCE by pr_warn_once")
Reported-by: syzbot+9bcb0c9409066696d3aa@syzkaller.appspotmail.com
Tested-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Link: https://lore.kernel.org/r/20201103213906.24219-2-anant.thazhemadam@gmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
If THIS_MODULE is not set, the module would be removed while debugfs is
being used.
It eventually makes kernel panic.
Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
If sb_occ_port_pool_get() failed in devlink_nl_sb_port_pool_fill(),
msg should be canceled by genlmsg_cancel().
Fixes: df38dafd2559 ("devlink: implement shared buffer occupancy monitoring interface")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20201113111622.11040-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Static checking revealed that a previous fix to
netlbl_unlabel_staticlist() leaves a stack variable uninitialized,
this patches fixes that.
Fixes: 866358ec331f ("netlabel: fix our progress tracking in netlbl_unlabel_staticlist()")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Link: https://lore.kernel.org/r/160530304068.15651.18355773009751195447.stgit@sifl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A call trace was found in Hangbin's Codenomicon testing with debug kernel:
[ 2615.981988] ODEBUG: free active (active state 0) object type: timer_list hint: sctp_generate_proto_unreach_event+0x0/0x3a0 [sctp]
[ 2615.995050] WARNING: CPU: 17 PID: 0 at lib/debugobjects.c:328 debug_print_object+0x199/0x2b0
[ 2616.095934] RIP: 0010:debug_print_object+0x199/0x2b0
[ 2616.191533] Call Trace:
[ 2616.194265] <IRQ>
[ 2616.202068] debug_check_no_obj_freed+0x25e/0x3f0
[ 2616.207336] slab_free_freelist_hook+0xeb/0x140
[ 2616.220971] kfree+0xd6/0x2c0
[ 2616.224293] rcu_do_batch+0x3bd/0xc70
[ 2616.243096] rcu_core+0x8b9/0xd00
[ 2616.256065] __do_softirq+0x23d/0xacd
[ 2616.260166] irq_exit+0x236/0x2a0
[ 2616.263879] smp_apic_timer_interrupt+0x18d/0x620
[ 2616.269138] apic_timer_interrupt+0xf/0x20
[ 2616.273711] </IRQ>
This is because it holds asoc when transport->proto_unreach_timer starts
and puts asoc when the timer stops, and without holding transport the
transport could be freed when the timer is still running.
So fix it by holding/putting transport instead for proto_unreach_timer
in transport, just like other timers in transport.
v1->v2:
- Also use sctp_transport_put() for the "out_unlock:" path in
sctp_generate_proto_unreach_event(), as Marcelo noticed.
Fixes: 50b5d6ad6382 ("sctp: Fix a race between ICMP protocol unreachable and connect()")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://lore.kernel.org/r/102788809b554958b13b95d33440f5448113b8d6.1605331373.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before commit c0cfa2d8a788 ("vsock: add multi-transports support"),
if a G2H transport was loaded (e.g. virtio transport), every packets
was forwarded to the host, regardless of the destination CID.
The H2G transports implemented until then (vhost-vsock, VMCI) always
responded with an error, if the destination CID was not
VMADDR_CID_HOST.
From that commit, we are using the remote CID to decide which
transport to use, so packets with remote CID > VMADDR_CID_HOST(2)
are sent only through H2G transport. If no H2G is available, packets
are discarded directly in the guest.
Some use cases (e.g. Nitro Enclaves [1]) rely on the old behaviour
to implement sibling VMs communication, so we restore the old
behavior when no H2G is registered.
It will be up to the host to discard packets if the destination is
not the right one. As it was already implemented before adding
multi-transport support.
Tested with nested QEMU/KVM by me and Nitro Enclaves by Andra.
[1] Documentation/virt/ne_overview.rst
Cc: Jorgen Hansen <jhansen@vmware.com>
Cc: Dexuan Cui <decui@microsoft.com>
Fixes: c0cfa2d8a788 ("vsock: add multi-transports support")
Reported-by: Andra Paraschiv <andraprs@amazon.com>
Tested-by: Andra Paraschiv <andraprs@amazon.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201112133837.34183-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
genlmsg_cancel() needs to be called in the error path of
inet6_fill_ifmcaddr and inet6_fill_ifacaddr to cancel
the message.
Fixes: 6ecf4c37eb3e ("ipv6: enable IFA_TARGET_NETNSID for RTM_GETADDR")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201112080950.1476302-1-zhangqilong3@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 58956317c8de ("neighbor: Improve garbage collection")
guarantees neighbour table entries a five-second lifetime. Processes
which make heavy use of multicast can fill the neighour table with
multicast addresses in five seconds. At that point, neighbour entries
can't be GC-ed because they aren't five seconds old yet, the kernel
log starts to fill up with "neighbor table overflow!" messages, and
sends start to fail.
This patch allows multicast addresses to be thrown out before they've
lived out their five seconds. This makes room for non-multicast
addresses and makes messages to all addresses more reliable in these
circumstances.
Fixes: 58956317c8de ("neighbor: Improve garbage collection")
Signed-off-by: Jeff Dike <jdike@akamai.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20201113015815.31397-1-jdike@akamai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* a use-after-free fix in rfkill
* a memory leak fix in the mac80211 TX status path
* some rate scaling fixes
* a fix for the often-reported (by syzbot) sleeping
in atomic issue with mac80211's station removal
-----BEGIN PGP SIGNATURE-----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=r2Wn
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-net-2020-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
A handful of fixes:
* a use-after-free fix in rfkill
* a memory leak fix in the mac80211 TX status path
* some rate scaling fixes
* a fix for the often-reported (by syzbot) sleeping
in atomic issue with mac80211's station removal
* tag 'mac80211-for-net-2020-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211:
mac80211: free sta in sta_info_insert_finish() on errors
mac80211: minstrel: fix tx status processing corner case
mac80211: minstrel: remove deferred sampling code
mac80211: fix memory leak on filtered powersave frames
rfkill: Fix use-after-free in rfkill_resume()
====================
Link: https://lore.kernel.org/r/20201113093421.24025-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The x25_disconnect function in x25_subr.c would decrease the refcount of
"x25->neighbour" (struct x25_neigh) and reset this pointer to NULL.
However, the x25_rx_call_request function in af_x25.c, which is called
when we receive a connection request, does not increase the refcount when
it assigns the pointer.
Fix this issue by increasing the refcount of "struct x25_neigh" in
x25_rx_call_request.
This patch fixes frequent kernel crashes when using AF_X25 sockets.
Fixes: 4becb7ee5b3d ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect")
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Link: https://lore.kernel.org/r/20201112103506.5875-1-xie.he.0141@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a user unbinds and re-binds a NC-SI aware driver the kernel will
attempt to register the netlink interface at runtime. The structure is
marked __ro_after_init so registration fails spectacularly at this point.
# echo 1e660000.ethernet > /sys/bus/platform/drivers/ftgmac100/unbind
# echo 1e660000.ethernet > /sys/bus/platform/drivers/ftgmac100/bind
ftgmac100 1e660000.ethernet: Read MAC address 52:54:00:12:34:56 from chip
ftgmac100 1e660000.ethernet: Using NCSI interface
8<--- cut here ---
Unable to handle kernel paging request at virtual address 80a8f858
pgd = 8c768dd6
[80a8f858] *pgd=80a0841e(bad)
Internal error: Oops: 80d [#1] SMP ARM
CPU: 0 PID: 116 Comm: sh Not tainted 5.10.0-rc3-next-20201111-00003-gdd25b227ec1e #51
Hardware name: Generic DT based system
PC is at genl_register_family+0x1f8/0x6d4
LR is at 0xff26ffff
pc : [<8073f930>] lr : [<ff26ffff>] psr: 20000153
sp : 8553bc80 ip : 81406244 fp : 8553bd04
r10: 8085d12c r9 : 80a8f73c r8 : 85739000
r7 : 00000017 r6 : 80a8f860 r5 : 80c8ab98 r4 : 80a8f858
r3 : 00000000 r2 : 00000000 r1 : 81406130 r0 : 00000017
Flags: nzCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment none
Control: 00c5387d Table: 85524008 DAC: 00000051
Process sh (pid: 116, stack limit = 0x1f1988d6)
...
Backtrace:
[<8073f738>] (genl_register_family) from [<80860ac0>] (ncsi_init_netlink+0x20/0x48)
r10:8085d12c r9:80c8fb0c r8:85739000 r7:00000000 r6:81218000 r5:85739000
r4:8121c000
[<80860aa0>] (ncsi_init_netlink) from [<8085d740>] (ncsi_register_dev+0x1b0/0x210)
r5:8121c400 r4:8121c000
[<8085d590>] (ncsi_register_dev) from [<805a8060>] (ftgmac100_probe+0x6e0/0x778)
r10:00000004 r9:80950228 r8:8115bc10 r7:8115ab00 r6:9eae2c24 r5:813b6f88
r4:85739000
[<805a7980>] (ftgmac100_probe) from [<805355ec>] (platform_drv_probe+0x58/0xa8)
r9:80c76bb0 r8:00000000 r7:80cd4974 r6:80c76bb0 r5:8115bc10 r4:00000000
[<80535594>] (platform_drv_probe) from [<80532d58>] (really_probe+0x204/0x514)
r7:80cd4974 r6:00000000 r5:80cd4868 r4:8115bc10
Jakub pointed out that ncsi_register_dev is obviously broken, because
there is only one family so it would never work if there was more than
one ncsi netdev.
Fix the crash by registering the netlink family once on boot, and drop
the code to unregister it.
Fixes: 955dc68cb9b2 ("net/ncsi: Add generic netlink family")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Link: https://lore.kernel.org/r/20201112061210.914621-1-joel@jms.id.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- arm64: dts: fsl-ls1028a-kontron-sl28: specify in-band mode for ENETC
Current release - bugs in new features:
- mptcp: provide rmem[0] limit offset to fix oops
Previous release - regressions:
- IPv6: Set SIT tunnel hard_header_len to zero to fix path MTU
calculations
- lan743x: correctly handle chips with internal PHY
- bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE
- mlx5e: Fix VXLAN port table synchronization after function reload
Previous release - always broken:
- bpf: Zero-fill re-used per-cpu map element
- net: udp: fix out-of-order packets when forwarding with UDP GSO
fraglists turned on
- fix UDP header access on Fast/frag0 UDP GRO
- fix IP header access and skb lookup on Fast/frag0 UDP GRO
- ethtool: netlink: add missing netdev_features_change() call
- net: Update window_clamp if SOCK_RCVBUF is set
- igc: Fix returning wrong statistics
- ch_ktls: fix multiple leaks and corner cases in Chelsio TLS offload
- tunnels: Fix off-by-one in lower MTU bounds for ICMP/ICMPv6 replies
- r8169: disable hw csum for short packets on all chip versions
- vrf: Fix fast path output packet handling with async Netfilter rules
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=AKM7
-----END PGP SIGNATURE-----
Merge tag 'net-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Current release - regressions:
- arm64: dts: fsl-ls1028a-kontron-sl28: specify in-band mode for
ENETC
Current release - bugs in new features:
- mptcp: provide rmem[0] limit offset to fix oops
Previous release - regressions:
- IPv6: Set SIT tunnel hard_header_len to zero to fix path MTU
calculations
- lan743x: correctly handle chips with internal PHY
- bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE
- mlx5e: Fix VXLAN port table synchronization after function reload
Previous release - always broken:
- bpf: Zero-fill re-used per-cpu map element
- fix out-of-order UDP packets when forwarding with UDP GSO fraglists
turned on:
- fix UDP header access on Fast/frag0 UDP GRO
- fix IP header access and skb lookup on Fast/frag0 UDP GRO
- ethtool: netlink: add missing netdev_features_change() call
- net: Update window_clamp if SOCK_RCVBUF is set
- igc: Fix returning wrong statistics
- ch_ktls: fix multiple leaks and corner cases in Chelsio TLS offload
- tunnels: Fix off-by-one in lower MTU bounds for ICMP/ICMPv6 replies
- r8169: disable hw csum for short packets on all chip versions
- vrf: Fix fast path output packet handling with async Netfilter
rules"
* tag 'net-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
lan743x: fix use of uninitialized variable
net: udp: fix IP header access and skb lookup on Fast/frag0 UDP GRO
net: udp: fix UDP header access on Fast/frag0 UDP GRO
devlink: Avoid overwriting port attributes of registered port
vrf: Fix fast path output packet handling with async Netfilter rules
cosa: Add missing kfree in error path of cosa_write
net: switch to the kernel.org patchwork instance
ch_ktls: stop the txq if reaches threshold
ch_ktls: tcb update fails sometimes
ch_ktls/cxgb4: handle partial tag alone SKBs
ch_ktls: don't free skb before sending FIN
ch_ktls: packet handling prior to start marker
ch_ktls: Correction in middle record handling
ch_ktls: missing handling of header alone
ch_ktls: Correction in trimmed_len calculation
cxgb4/ch_ktls: creating skbs causes panic
ch_ktls: Update cheksum information
ch_ktls: Correction in finding correct length
cxgb4/ch_ktls: decrypted bit is not enough
net/x25: Fix null-ptr-deref in x25_connect
...
udp{4,6}_lib_lookup_skb() use ip{,v6}_hdr() to get IP header of the
packet. While it's probably OK for non-frag0 paths, this helpers
will also point to junk on Fast/frag0 GRO when all headers are
located in frags. As a result, sk/skb lookup may fail or give wrong
results. To support both GRO modes, skb_gro_network_header() might
be used. To not modify original functions, add private versions of
udp{4,6}_lib_lookup_skb() only to perform correct sk lookups on GRO.
Present since the introduction of "application-level" UDP GRO
in 4.7-rc1.
Misc: replace totally unneeded ternaries with plain ifs.
Fixes: a6024562ffd7 ("udp: Add GRO functions to UDP socket")
Suggested-by: Willem de Bruijn <willemb@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
UDP GRO uses udp_hdr(skb) in its .gro_receive() callback. While it's
probably OK for non-frag0 paths (when all headers or even the entire
frame are already in skb head), this inline points to junk when
using Fast GRO (napi_gro_frags() or napi_gro_receive() with only
Ethernet header in skb head and all the rest in the frags) and breaks
GRO packet compilation and the packet flow itself.
To support both modes, skb_gro_header_fast() + skb_gro_header_slow()
are typically used. UDP even has an inline helper that makes use of
them, udp_gro_udphdr(). Use that instead of troublemaking udp_hdr()
to get rid of the out-of-order delivers.
Present since the introduction of plain UDP GRO in 5.0-rc1.
Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.")
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cited commit in fixes tag overwrites the port attributes for the
registered port.
Avoid such error by checking registered flag before setting attributes.
Fixes: 71ad8d55f8e5 ("devlink: Replace devlink_port_attrs_set parameters with a struct")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20201111034744.35554-1-parav@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some drivers fill the status rate list without setting the rate index after
the final rate to -1. minstrel_ht already deals with this, but minstrel
doesn't, which causes it to get stuck at the lowest rate on these drivers.
Fix this by checking the count as well.
Cc: stable@vger.kernel.org
Fixes: cccf129f820e ("mac80211: add the 'minstrel' rate control algorithm")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20201111183359.43528-3-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Deferring sampling attempts to the second stage has some bad interactions
with drivers that process the rate table in hardware and use the probe flag
to indicate probing packets (e.g. most mt76 drivers). On affected drivers
it can lead to probing not working at all.
If the link conditions turn worse, it might not be such a good idea to
do a lot of sampling for lower rates in this case.
Fix this by simply skipping the sample attempt instead of deferring it,
but keep the checks that would allow it to be sampled if it was skipped
too often, but only if it has less than 95% success probability.
Also ensure that IEEE80211_TX_CTL_RATE_CTRL_PROBE is set for all probing
packets.
Cc: stable@vger.kernel.org
Fixes: cccf129f820e ("mac80211: add the 'minstrel' rate control algorithm")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20201111183359.43528-2-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
After the status rework, ieee80211_tx_status_ext is leaking un-acknowledged
packets for stations in powersave mode.
To fix this, move the code handling those packets from __ieee80211_tx_status
into ieee80211_tx_status_ext
Reported-by: Tobias Waldvogel <tobias.waldvogel@gmail.com>
Fixes: 3318111cf63d ("mac80211: reduce duplication in tx status functions")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20201111183359.43528-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If a device is getting removed or reprobed during resume, use-after-free
might happen. For example, h5_btrtl_resume() schedules a work queue for
device reprobing, which of course requires removal first.
If the removal happens in parallel with the device_resume() and wins the
race to acquire device_lock(), removal may remove the device from the PM
lists and all, but device_resume() is already running and will continue
when the lock can be acquired, thus calling rfkill_resume().
During this, if rfkill_set_block() is then called after the corresponding
*_unregister() and kfree() are called, there will be an use-after-free
in hci_rfkill_set_block():
BUG: KASAN: use-after-free in hci_rfkill_set_block+0x58/0xc0 [bluetooth]
...
Call trace:
dump_backtrace+0x0/0x154
show_stack+0x20/0x2c
dump_stack+0xbc/0x12c
print_address_description+0x88/0x4b0
__kasan_report+0x144/0x168
kasan_report+0x10/0x18
check_memory_region+0x19c/0x1ac
__kasan_check_write+0x18/0x24
hci_rfkill_set_block+0x58/0xc0 [bluetooth]
rfkill_set_block+0x9c/0x120
rfkill_resume+0x34/0x70
dpm_run_callback+0xf0/0x1f4
device_resume+0x210/0x22c
Fix this by checking rfkill->registered in rfkill_resume(). device_del()
in rfkill_unregister() requires device_lock() and the whole rfkill_resume()
is also protected by the same lock via device_resume(), we can make sure
either the rfkill->registered is false before rfkill_resume() starts or the
rfkill device won't be unregistered before rfkill_resume() returns.
As async_resume() holds a reference to the device, at this level there can
be no use-after-free; only in the user that doesn't expect this scenario.
Fixes: 8589086f4efd ("Bluetooth: hci_h5: Turn off RTL8723BS on suspend, reprobe on resume")
Signed-off-by: Claire Chang <tientzu@chromium.org>
Link: https://lore.kernel.org/r/20201110084908.219088-1-tientzu@chromium.org
[edit commit message for clarity and add more info provided later]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This fixes a regression for blocking connects introduced by commit
4becb7ee5b3d ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect").
The x25->neighbour is already set to "NULL" by x25_disconnect() now,
while a blocking connect is waiting in
x25_wait_for_connection_establishment(). Therefore x25->neighbour must
not be accessed here again and x25->state is also already set to
X25_STATE_0 by x25_disconnect().
Fixes: 4becb7ee5b3d ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect")
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Reviewed-by: Xie He <xie.he.0141@gmail.com>
Link: https://lore.kernel.org/r/20201109065449.9014-1-ms@dev.tdt.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported the following KASAN finding:
BUG: KASAN: nullptr-dereference in iucv_send_ctrl+0x390/0x3f0 net/iucv/af_iucv.c:385
Read of size 2 at addr 000000000000021e by task syz-executor907/519
CPU: 0 PID: 519 Comm: syz-executor907 Not tainted 5.9.0-syzkaller-07043-gbcf9877ad213 #0
Hardware name: IBM 3906 M04 701 (KVM/Linux)
Call Trace:
[<00000000c576af60>] unwind_start arch/s390/include/asm/unwind.h:65 [inline]
[<00000000c576af60>] show_stack+0x180/0x228 arch/s390/kernel/dumpstack.c:135
[<00000000c9dcd1f8>] __dump_stack lib/dump_stack.c:77 [inline]
[<00000000c9dcd1f8>] dump_stack+0x268/0x2f0 lib/dump_stack.c:118
[<00000000c5fed016>] print_address_description.constprop.0+0x5e/0x218 mm/kasan/report.c:383
[<00000000c5fec82a>] __kasan_report mm/kasan/report.c:517 [inline]
[<00000000c5fec82a>] kasan_report+0x11a/0x168 mm/kasan/report.c:534
[<00000000c98b5b60>] iucv_send_ctrl+0x390/0x3f0 net/iucv/af_iucv.c:385
[<00000000c98b6262>] iucv_sock_shutdown+0x44a/0x4c0 net/iucv/af_iucv.c:1457
[<00000000c89d3a54>] __sys_shutdown+0x12c/0x1c8 net/socket.c:2204
[<00000000c89d3b70>] __do_sys_shutdown net/socket.c:2212 [inline]
[<00000000c89d3b70>] __s390x_sys_shutdown+0x38/0x48 net/socket.c:2210
[<00000000c9e36eac>] system_call+0xe0/0x28c arch/s390/kernel/entry.S:415
There is nothing to shutdown if a connection has never been established.
Besides that iucv->hs_dev is not yet initialized if a socket is in
IUCV_OPEN state and iucv->path is not yet initialized if socket is in
IUCV_BOUND state.
So, just skip the shutdown calls for a socket in these states.
Fixes: eac3731bd04c ("[S390]: Add AF_IUCV socket support")
Fixes: 82492a355fac ("af_iucv: add shutdown for HS transport")
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
[jwi: correct one Fixes tag]
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When net.ipv4.tcp_syncookies=1 and syn flood is happened,
cookie_v4_check or cookie_v6_check tries to redo what
tcp_v4_send_synack or tcp_v6_send_synack did,
rsk_window_clamp will be changed if SOCK_RCVBUF is set,
which will make rcv_wscale is different, the client
still operates with initial window scale and can overshot
granted window, the client use the initial scale but local
server use new scale to advertise window value, and session
work abnormally.
Fixes: e88c64f0a425 ("tcp: allow effective reduction of TCP's rcv-buffer via setsockopt")
Signed-off-by: Mao Wenan <wenan.mao@linux.alibaba.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/1604967391-123737-1-git-send-email-wenan.mao@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current NetLabel code doesn't correctly keep track of the netlink
dump state in some cases, in particular when multiple interfaces with
large configurations are loaded. The problem manifests itself by not
reporting the full configuration to userspace, even though it is
loaded and active in the kernel. This patch fixes this by ensuring
that the dump state is properly reset when necessary inside the
netlbl_unlabel_staticlist() function.
Fixes: 8cc44579d1bd ("NetLabel: Introduce static network labels for unlabeled connections")
Signed-off-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/160484450633.3752.16512718263560813473.stgit@sifl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mptcp proto struct currently does not provide the
required limit for forward memory scheduling. Under
pressure sk_rmem_schedule() will unconditionally try
to use such field and will oops.
Address the issue inheriting the tcp limit, as we already
do for the wmem one.
Fixes: 9c3f94e1681b ("mptcp: add missing memory scheduling in the rx path")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/37af798bd46f402fb7c79f57ebbdd00614f5d7fa.1604861097.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After updating userspace Ethtool from 5.7 to 5.9, I noticed that
NETDEV_FEAT_CHANGE is no more raised when changing netdev features
through Ethtool.
That's because the old Ethtool ioctl interface always calls
netdev_features_change() at the end of user request processing to
inform the kernel that our netdevice has some features changed, but
the new Netlink interface does not. Instead, it just notifies itself
with ETHTOOL_MSG_FEATURES_NTF.
Replace this ethtool_notify() call with netdev_features_change(), so
the kernel will be aware of any features changes, just like in case
with the ioctl interface. This does not omit Ethtool notifications,
as Ethtool itself listens to NETDEV_FEAT_CHANGE and drops
ETHTOOL_MSG_FEATURES_NTF on it
(net/ethtool/netlink.c:ethnl_netdev_event()).
From v1 [1]:
- dropped extra new line as advised by Jakub;
- no functional changes.
[1] https://lore.kernel.org/netdev/AlZXQ2o5uuTVHCfNGOiGgJ8vJ3KgO5YIWAnQjH0cDE@cp3-web-009.plabs.ch
Fixes: 0980bfcd6954 ("ethtool: set netdev features with FEATURES_SET request")
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Link: https://lore.kernel.org/r/ahA2YWXYICz5rbUSQqNG4roJ8OlJzzYQX7PTiG80@cp4-web-028.plabs.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jianlin reports that a bridged IPv6 VXLAN endpoint, carrying IPv6
packets over a link with a PMTU estimation of exactly 1350 bytes,
won't trigger ICMPv6 Packet Too Big replies when the encapsulated
datagrams exceed said PMTU value. VXLAN over IPv6 adds 70 bytes of
overhead, so an ICMPv6 reply indicating 1280 bytes as inner MTU
would be legitimate and expected.
This comes from an off-by-one error I introduced in checks added
as part of commit 4cb47a8644cc ("tunnels: PMTU discovery support
for directly bridged IP packets"), whose purpose was to prevent
sending ICMPv6 Packet Too Big messages with an MTU lower than the
smallest permissible IPv6 link MTU, i.e. 1280 bytes.
In iptunnel_pmtud_check_icmpv6(), avoid triggering a reply only if
the advertised MTU would be less than, and not equal to, 1280 bytes.
Also fix the analogous comparison for IPv4, that is, skip the ICMP
reply only if the resulting MTU is strictly less than 576 bytes.
This becomes apparent while running the net/pmtu.sh bridged VXLAN
or GENEVE selftests with adjusted lower-link MTU values. Using
e.g. GENEVE, setting ll_mtu to the values reported below, in the
test_pmtu_ipvX_over_bridged_vxlanY_or_geneveY_exception() test
function, we can see failures on the following tests:
test | ll_mtu
-------------------------------|--------
pmtu_ipv4_br_geneve4_exception | 626
pmtu_ipv6_br_geneve4_exception | 1330
pmtu_ipv6_br_geneve6_exception | 1350
owing to the different tunneling overheads implied by the
corresponding configurations.
Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: 4cb47a8644cc ("tunnels: PMTU discovery support for directly bridged IP packets")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://lore.kernel.org/r/4f5fc2f33bfdf8409549fafd4f952b008bf04d63.1604681709.git.sbrivio@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Due to the legacy usage of hard_header_len for SIT tunnels while
already using infrastructure from net/ipv4/ip_tunnel.c the
calculation of the path MTU in tnl_update_pmtu is incorrect.
This leads to unnecessary creation of MTU exceptions for any
flow going over a SIT tunnel.
As SIT tunnels do not have a header themsevles other than their
transport (L3, L2) headers we're leaving hard_header_len set to zero
as tnl_update_pmtu is already taking care of the transport headers
sizes.
This will also help avoiding unnecessary IPv6 GC runs and spinlock
contention seen when using SIT tunnels and for more than
net.ipv6.route.gc_thresh flows.
Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.")
Signed-off-by: Oliver Herms <oliver.peter.herms@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20201103104133.GA1573211@tws
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
refactoring.
-----BEGIN PGP SIGNATURE-----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=bpPt
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.10-1' of git://linux-nfs.org/~bfields/linux
Pull nfsd fixes from Bruce Fields:
"This is mainly server-to-server copy and fallout from Chuck's 5.10 rpc
refactoring"
* tag 'nfsd-5.10-1' of git://linux-nfs.org/~bfields/linux:
net/sunrpc: fix useless comparison in proc_do_xprt()
net/sunrpc: return 0 on attempt to write to "transports"
NFSD: fix missing refcount in nfsd4_copy by nfsd4_do_async_copy
NFSD: Fix use-after-free warning when doing inter-server copy
NFSD: MKNOD should return NFSERR_BADTYPE instead of NFSERR_INVAL
SUNRPC: Fix general protection fault in trace_rpc_xdr_overflow()
NFSD: NFSv3 PATHCONF Reply is improperly formed
In the original code, the "if (*lenp < 0)" check didn't work because
"*lenp" is unsigned. Fortunately, the memory_read_from_buffer() call
will never fail in this context so it doesn't affect runtime.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Alexei Starovoitov says:
====================
pull-request: bpf 2020-11-06
1) Pre-allocated per-cpu hashmap needs to zero-fill reused element, from David.
2) Tighten bpf_lsm function check, from KP.
3) Fix bpftool attaching to flow dissector, from Lorenz.
4) Use -fno-gcse for the whole kernel/bpf/core.c instead of function attribute, from Ard.
* git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Update verification logic for LSM programs
bpf: Zero-fill re-used per-cpu map element
bpf: BPF_PRELOAD depends on BPF_SYSCALL
tools/bpftool: Fix attaching flow dissector
libbpf: Fix possible use after free in xsk_socket__delete
libbpf: Fix null dereference in xsk_socket__delete
libbpf, hashmap: Fix undefined behavior in hash_bits
bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE
tools, bpftool: Remove two unused variables.
tools, bpftool: Avoid array index warnings.
xsk: Fix possible memory leak at socket close
bpf: Add struct bpf_redir_neigh forward declaration to BPF helper defs
samples/bpf: Set rlimit for memlock to infinity in all samples
bpf: Fix -Wshadow warnings
selftest/bpf: Fix profiler test using CO-RE relocation for enums
====================
Link: https://lore.kernel.org/r/20201106221759.24143-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
You can't write to this file because the permissions are 0444. But
it sort of looked like you could do a write and it would result in
a read. Then it looked like proc_sys_call_handler() just ignored
it. Which is confusing. It's more clear if the "write" just
returns zero.
Also, the "lenp" pointer is never NULL so that check can be removed.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
and netfilter subtrees.
Current release - bugs in new features:
- can: isotp: isotp_rcv_cf(): enable RX timeout handling in
listen-only mode
Previous release - regressions:
- mac80211:
- don't require VHT elements for HE on 2.4 GHz
- fix regression where EAPOL frames were sent in plaintext
- netfilter:
- ipset: Update byte and packet counters regardless of whether
they match
- ip_tunnel: fix over-mtu packet send by allowing fragmenting even
if inner packet has IP_DF (don't fragment) set in its header
(when TUNNEL_DONT_FRAGMENT flag is not set on the tunnel dev)
- net: fec: fix MDIO probing for some FEC hardware blocks
- ip6_tunnel: set inner ipproto before ip6_tnl_encap to un-break
gso support
- sctp: Fix COMM_LOST/CANT_STR_ASSOC err reporting on big-endian
platforms, sparse-related fix used the wrong integer size
Previous release - always broken:
- netfilter: use actual socket sk rather than skb sk when routing
harder
- r8169: work around short packet hw bug on RTL8125 by padding frames
- net: ethernet: ti: cpsw: disable PTPv1 hw timestamping
advertisement, the hardware does not support it
- chelsio/chtls: fix always leaking ctrl_skb and another leak caused
by a race condition
- fix drivers incorrectly writing into skbs on TX:
- cadence: force nonlinear buffers to be cloned
- gianfar: Account for Tx PTP timestamp in the skb headroom
- gianfar: Replace skb_realloc_headroom with skb_cow_head for PTP
- can: flexcan:
- remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A
- add ECC initialization for VF610 and LX2160A
- flexcan_remove(): disable wakeup completely
- can: fix packet echo functionality:
- peak_canfd: fix echo management when loopback is on
- make sure skbs are not freed in IRQ context in case they need
to be dropped
- always clone the skbs to make sure they have a reference on
the socket, and prevent it from disappearing
- fix real payload length return value for RTR frames
- can: j1939: return failure on bind if netdev is down, rather than
waiting indefinitely
Misc:
- IPv6: reply ICMP error if the first fragment don't include all
headers to improve compliance with RFC 8200
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=5R2w
-----END PGP SIGNATURE-----
Merge tag 'net-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.10-rc3, including fixes from wireless, can, and
netfilter subtrees.
Current merge window - bugs in new features:
- can: isotp: isotp_rcv_cf(): enable RX timeout handling in
listen-only mode
Previous releases - regressions:
- mac80211:
- don't require VHT elements for HE on 2.4 GHz
- fix regression where EAPOL frames were sent in plaintext
- netfilter:
- ipset: Update byte and packet counters regardless of whether
they match
- ip_tunnel: fix over-mtu packet send by allowing fragmenting even if
inner packet has IP_DF (don't fragment) set in its header (when
TUNNEL_DONT_FRAGMENT flag is not set on the tunnel dev)
- net: fec: fix MDIO probing for some FEC hardware blocks
- ip6_tunnel: set inner ipproto before ip6_tnl_encap to un-break gso
support
- sctp: Fix COMM_LOST/CANT_STR_ASSOC err reporting on big-endian
platforms, sparse-related fix used the wrong integer size
Previous releases - always broken:
- netfilter: use actual socket sk rather than skb sk when routing
harder
- r8169: work around short packet hw bug on RTL8125 by padding frames
- net: ethernet: ti: cpsw: disable PTPv1 hw timestamping
advertisement, the hardware does not support it
- chelsio/chtls: fix always leaking ctrl_skb and another leak caused
by a race condition
- fix drivers incorrectly writing into skbs on TX:
- cadence: force nonlinear buffers to be cloned
- gianfar: Account for Tx PTP timestamp in the skb headroom
- gianfar: Replace skb_realloc_headroom with skb_cow_head for PTP
- can: flexcan:
- remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A
- add ECC initialization for VF610 and LX2160A
- flexcan_remove(): disable wakeup completely
- can: fix packet echo functionality:
- peak_canfd: fix echo management when loopback is on
- make sure skbs are not freed in IRQ context in case they need to
be dropped
- always clone the skbs to make sure they have a reference on the
socket, and prevent it from disappearing
- fix real payload length return value for RTR frames
- can: j1939: return failure on bind if netdev is down, rather than
waiting indefinitely
Misc:
- IPv6: reply ICMP error if the first fragment don't include all
headers to improve compliance with RFC 8200"
* tag 'net-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits)
ionic: check port ptr before use
r8169: work around short packet hw bug on RTL8125
net: openvswitch: silence suspicious RCU usage warning
chelsio/chtls: fix always leaking ctrl_skb
chelsio/chtls: fix memory leaks caused by a race
can: flexcan: flexcan_remove(): disable wakeup completely
can: flexcan: add ECC initialization for VF610
can: flexcan: add ECC initialization for LX2160A
can: flexcan: remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A
can: mcp251xfd: remove unneeded break
can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings
can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages
can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on
can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping
can: peak_usb: add range checking in decode operations
can: xilinx_can: handle failure cases of pm_runtime_get_sync
can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path
can: isotp: padlen(): make const array static, makes object smaller
can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode
can: isotp: Explain PDU in CAN_ISOTP help text
...
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAl+hzPwTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCpyVqK+u3vqU8YB/9PBALnpZFDSyOE/8rKoBoqA2uPfj2i
Yplu98jkFqhnb5I1KFPCNJiTQd+/aAzM2LzeGHVOBMIF6scPUclC12k1q4fdLtX0
6YMZ38w2I2hq8z1QIgOYo7jQ34NeonNt7T5CHEeBA7xXGnlo/WYDNDE0cruPnPRZ
eFqM5f1/PVKKh4gFVTAqICC2ZMefL4rgAkFgFXj2rfiYr115OEGAwCav5Ys31p/y
MI5SfQmNkfkE8HswMNBDQZ+8V5qkKvarHXwUcRfgUqkpqHQjzcOIJnCDh/ngIh50
imwxHaCerXvEj8MBUcF2fZV7w6QPTFIV3TQ0AiUjuVUE3HPuR+JPvSl4
=B3CC
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-5.10-20201103' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2020-11-03
The first two patches are by Oleksij Rempel and they add a generic
can-controller Device Tree yaml binding and convert the text based binding
of the flexcan driver to a yaml based binding.
Zhang Changzhong's patch fixes a remove_proc_entry warning in the AF_CAN
core.
A patch by me fixes a kfree_skb() call from IRQ context in the rx-offload
helper.
Vincent Mailhol contributes a patch to prevent a call to kfree_skb() in
hard IRQ context in can_get_echo_skb().
Oliver Hartkopp's patch fixes the length calculation for RTR CAN frames
in the __can_get_echo_skb() helper.
Oleksij Rempel's patch fixes a use-after-free that shows up with j1939 in
can_create_echo_skb().
Yegor Yefremov contributes 4 patches to enhance the j1939 documentation.
Zhang Changzhong's patch fixes a hanging task problem in j1939_sk_bind()
if the netdev is down.
Then there are three patches for the newly added CAN_ISOTP protocol. Geert
Uytterhoeven enhances the kconfig help text. Oliver Hartkopp's patch adds
missing RX timeout handling in listen-only mode and Colin Ian King's patch
decreases the generated object code by 926 bytes.
Zhang Changzhong contributes a patch for the ti_hecc driver that fixes the
error path in the probe function.
Navid Emamdoost's patch for the xilinx_can driver fixes the error handling
in case of failing pm_runtime_get_sync().
There are two patches for the peak_usb driver. Dan Carpenter adds range
checking in decode operations and Stephane Grosjean's patch fixes
a timestamp wrapping problem.
Stephane Grosjean's patch for th peak_canfd driver fixes echo management if
loopback is on.
The next three patches all target the mcp251xfd driver. The first one is
by me and it increased the severity of CRC read error messages. The kernel
test robot removes an unneeded semicolon and Tom Rix removes unneeded
break in several switch-cases.
The last 4 patches are by Joakim Zhang and target the flexcan driver,
the first three fix ECC related device specific quirks for the LS1021A,
LX2160A and the VF610 SoC. The last patch disable wakeup completely upon
driver remove.
* tag 'linux-can-fixes-for-5.10-20201103' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: (27 commits)
can: flexcan: flexcan_remove(): disable wakeup completely
can: flexcan: add ECC initialization for VF610
can: flexcan: add ECC initialization for LX2160A
can: flexcan: remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A
can: mcp251xfd: remove unneeded break
can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings
can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages
can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on
can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping
can: peak_usb: add range checking in decode operations
can: xilinx_can: handle failure cases of pm_runtime_get_sync
can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path
can: isotp: padlen(): make const array static, makes object smaller
can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode
can: isotp: Explain PDU in CAN_ISOTP help text
can: j1939: j1939_sk_bind(): return failure if netdev is down
can: j1939: use backquotes for code samples
can: j1939: swap addr and pgn in the send example
can: j1939: fix syntax and spelling
can: j1939: rename jacd tool
...
====================
Link: https://lore.kernel.org/r/<20201103220636.972106-1-mkl@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Steffen Klassert says:
====================
1) Fix packet receiving of standard IP tunnels when the xfrm_interface
module is installed. From Xin Long.
2) Fix a race condition between spi allocating and hash list
resizing. From zhuoliang zhang.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Silence suspicious RCU usage warning in ovs_flow_tbl_masks_cache_resize()
by replacing rcu_dereference() with rcu_dereference_ovsl().
In addition, when creating a new datapath, make sure it's configured under
the ovs_lock.
Fixes: 9bf24f594c6a ("net: openvswitch: make masks cache size configurable")
Reported-by: syzbot+9a8f8bfcc56e8578016c@syzkaller.appspotmail.com
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/160439190002.56943.1418882726496275961.stgit@ebuild
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Don't populate the const array plen on the stack but instead it static. Makes
the object code smaller by 926 bytes.
Before:
text data bss dec hex filename
26531 1943 64 28538 6f7a net/can/isotp.o
After:
text data bss dec hex filename
25509 2039 64 27612 6bdc net/can/isotp.o
(gcc version 10.2.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201020154203.54711-1-colin.king@canonical.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
As reported by Thomas Wagner:
https://github.com/hartkopp/can-isotp/issues/34
the timeout handling for data frames is not enabled when the isotp socket is
used in listen-only mode (sockopt CAN_ISOTP_LISTEN_MODE). This mode is enabled
by the isotpsniffer application which therefore became inconsistend with the
strict rx timeout rules when running the isotp protocol in the operational
mode.
This patch fixes this inconsistency by moving the return condition for the
listen-only mode behind the timeout handling code.
Reported-by: Thomas Wagner <thwa1@web.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://github.com/hartkopp/can-isotp/issues/34
Link: https://lore.kernel.org/r/20201019120229.89326-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The help text for the CAN_ISOTP config symbol uses the acronym "PDU". However,
this acronym is not explained here, nor in Documentation/networking/can.rst.
Expand the acronym to make it easier for users to decide if they need to enable
the CAN_ISOTP option or not.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20201013141341.28487-1-geert+renesas@glider.be
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
When a netdev down event occurs after a successful call to
j1939_sk_bind(), j1939_netdev_notify() can handle it correctly.
But if the netdev already in down state before calling j1939_sk_bind(),
j1939_sk_release() will stay in wait_event_interruptible() blocked
forever. Because in this case, j1939_netdev_notify() won't be called and
j1939_tp_txtimer() won't call j1939_session_cancel() or other function
to clear session for ENETDOWN error, this lead to mismatch of
j1939_session_get/put() and jsk->skb_pending will never decrease to
zero.
To reproduce it use following commands:
1. ip link add dev vcan0 type vcan
2. j1939acd -r 100,80-120 1122334455667788 vcan0
3. presses ctrl-c and thread will be blocked forever
This patch adds check for ndev->flags in j1939_sk_bind() to avoid this
kind of situation and return with -ENETDOWN.
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1599460308-18770-1-git-send-email-zhangchangzhong@huawei.com
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
If can_init_proc() fail to create /proc/net/can directory, can_remove_proc()
will trigger a warning:
WARNING: CPU: 6 PID: 7133 at fs/proc/generic.c:672 remove_proc_entry+0x17b0
Kernel panic - not syncing: panic_on_warn set ...
Fix to return early from can_remove_proc() if can proc_dir does not exists.
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1594709090-3203-1-git-send-email-zhangchangzhong@huawei.com
Fixes: 8e8cda6d737d ("can: initial support for network namespaces")
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
gcc complains about use of uninitialized 'num'. Fix it by doing the first
assignment of 'num' when the variable is declared.
Fixes: 96d890daad05 ("mptcp: add msk interations helper")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/49e20da5d467a73414d4294a8bd35e2cb1befd49.1604308087.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 978aa0474115 ("sctp: fix some type cast warnings introduced since
very beginning")' broke err reading from sctp_arg, because it reads the
value as 32-bit integer, although the value is stored as 16-bit integer.
Later this value is passed to the userspace in 16-bit variable, thus the
user always gets 0 on big-endian platforms. Fix it by reading the __u16
field of sctp_arg union, as reading err field would produce a sparse
warning.
Fixes: 978aa0474115 ("sctp: fix some type cast warnings introduced since very beginning")
Signed-off-by: Petr Malat <oss@malat.biz>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://lore.kernel.org/r/20201030132633.7045-1-oss@malat.biz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* HE on 2.4 GHz
* a few issues syzbot found, but we have many more reports :-(
* a regression in nl80211-transported EAPOL frames which had
affected a number of users, from Mathy
* kernel-doc markings in mac80211, from Mauro
* a format argument in reg.c, from Ye Bin
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEH1e1rEeCd0AIMq6MB8qZga/fl8QFAl+b4B0ACgkQB8qZga/f
l8SdOg/+PcKqoNXh+VgP2ZvCcN3D/3ow5mf9OgNijPoM35a4sJZdGpRWp1oUXK8O
1NbyE/mL3TiNS5HIb+jF03+pHOl+ysh0AE3QsQeZwn+bHkU61T9J477NQr4Y9hQ0
eJZxDjgSUsJhx1xnGPH0QFUi7zaFQAfy1Q5AVCPP5ywEOovTuOY9Qw/7D2EZoh5L
k2H1kjLIle2VCckqrL5pno3dz1lAGRZ5RGGiP8/ATfBH6pYON9yFSflc9x6azTS2
vWyfZxzbrFWvT2YFMwNUnNl4oNjLIvGYmYzULp9MweyFA6lfZpIOAcGtVoM98nD7
wu6KWeozo4c+3D25kqxRlpE6fILJ+uiCKcHV+7GyLsDkp9s2onE5f/UHmcP+pGkh
QE/ubTbe2brWSpPwHyAXEg1FQ3WPmJj90Tr3OA2j+rIfh/+eUH/inoxvddqyOamR
mBr8M1VRY8+PRAru9UKU+EG4CueX5GALxbOH8rJFtlDsJz33CxGm1sxpAc9pR4CX
XYuaPYsunok7/tXRxXulaCE0B6DOqyhX8L7drVJ0nEpAv7J3WfkZxlFs8+3VPBG7
BMiwNqNMKHM613a16vvl8ZOsguzRPIxhPLWVbcUb5c6NQq+4FOn5pZYtZU8jZ19e
w3iDPbfaCCARnf5U5JKqTt45q+71rbU9pSncMjy7r5/r1hPGwiQ=
=2AGz
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-net-2020-10-30' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
A couple of fixes, for
* HE on 2.4 GHz
* a few issues syzbot found, but we have many more reports :-(
* a regression in nl80211-transported EAPOL frames which had
affected a number of users, from Mathy
* kernel-doc markings in mac80211, from Mauro
* a format argument in reg.c, from Ye Bin
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Incorrect netlink report logic in flowtable and genID.
2) Add a selftest to check that wireguard passes the right sk
to ip_route_me_harder, from Jason A. Donenfeld.
3) Pass the actual sk to ip_route_me_harder(), also from Jason.
4) Missing expression validation of updates via nft --check.
5) Update byte and packet counters regardless of whether they
match, from Stefano Brivio.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tunnel device such as vxlan, bareudp and geneve in the lwt mode set
the outer df only based TUNNEL_DONT_FRAGMENT.
And this was also the behavior for gre device before switching to use
ip_md_tunnel_xmit in commit 962924fa2b7a ("ip_gre: Refactor collect
metatdata mode tunnel xmit to ip_md_tunnel_xmit")
When the ip_gre in lwt mode xmit with ip_md_tunnel_xmi changed the rule and
make the discrepancy between handling of DF by different tunnels. So in the
ip_md_tunnel_xmit should follow the same rule like other tunnels.
Fixes: cfc7381b3002 ("ip_tunnel: add collect_md mode to IPIP tunnel")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Link: https://lore.kernel.org/r/1604028728-31100-1-git-send-email-wenxu@ucloud.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hi Linus,
Please, pull the following patches that replace zero-length arrays with
flexible-array members.
Thanks
--
Gustavo
-----BEGIN PGP SIGNATURE-----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=vyu3
-----END PGP SIGNATURE-----
Merge tag 'flexible-array-conversions-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull more flexible-array member conversions from Gustavo A. R. Silva:
"Replace zero-length arrays with flexible-array members"
* tag 'flexible-array-conversions-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
printk: ringbuffer: Replace zero-length array with flexible-array member
net/smc: Replace zero-length array with flexible-array member
net/mlx5: Replace zero-length array with flexible-array member
mei: hw: Replace zero-length array with flexible-array member
gve: Replace zero-length array with flexible-array member
Bluetooth: btintel: Replace zero-length array with flexible-array member
scsi: target: tcmu: Replace zero-length array with flexible-array member
ima: Replace zero-length array with flexible-array member
enetc: Replace zero-length array with flexible-array member
fs: Replace zero-length array with flexible-array member
Bluetooth: Replace zero-length array with flexible-array member
params: Replace zero-length array with flexible-array member
tracepoint: Replace zero-length array with flexible-array member
platform/chrome: cros_ec_proto: Replace zero-length array with flexible-array member
platform/chrome: cros_ec_commands: Replace zero-length array with flexible-array member
mailbox: zynqmp-ipi-message: Replace zero-length array with flexible-array member
dmaengine: ti-cppi5: Replace zero-length array with flexible-array member
Based on RFC 8200, Section 4.5 Fragment Header:
- If the first fragment does not include all headers through an
Upper-Layer header, then that fragment should be discarded and
an ICMP Parameter Problem, Code 3, message should be sent to
the source of the fragment, with the Pointer field set to zero.
Checking each packet header in IPv6 fast path will have performance impact,
so I put the checking in ipv6_frag_rcv().
As the packet may be any kind of L4 protocol, I only checked some common
protocols' header length and handle others by (offset + 1) > skb->len.
Also use !(frag_off & htons(IP6_OFFSET)) to catch atomic fragments
(fragmented packet with only one fragment).
When send ICMP error message, if the 1st truncated fragment is ICMP message,
icmp6_send() will break as is_ineligible() return true. So I added a check
in is_ineligible() to let fragment packet with nexthdr ICMP but no ICMP header
return false.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>