IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Fixes the following to align to coding style:
WARNING: do not add new typedefs
+typedef struct FW_ATT_DB_HEADER
WARNING: do not add new typedefs
+typedef struct FW_ATT_RECORD
WARNING: Symbolic permissions 'S_IRUSR' are not preferred. Consider using octal permissions '0400'.
+ S_IRUSR,
ERROR: "(foo*)" should be "(foo *)"
WARNING: please, no space before tabs
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adhere to linux coding style
Fixes the following:
WARNING: Prefer IS_ENABLED(<FOO>) to CONFIG_<FOO> || CONFIG_<FOO>_MODULE
+#if defined(CONFIG_DRM_RADEON) || defined(CONFIG_DRM_RADEON_MODULE)
WARNING: Prefer IS_ENABLED(<FOO>) to CONFIG_<FOO> || CONFIG_<FOO>_MODULE
+#if defined(CONFIG_DRM_RADEON) || defined(CONFIG_DRM_RADEON_MODULE)
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MES can concurrently schedule queues on the device that require
exclusive device access if marked exclusively_scheduled without the
requirement of GWS. Similar to the F32 HWS, MES will manage
quality of service for these queues.
Use this for cooperative groups since cooperative groups are device
occupancy limited.
Since some GFX11 devices can only be debugged with partial CUs, do not
allow the debugging of cooperative groups on these devices as the CU
occupancy limit will change on attach.
In addition, zero initialize the MES add queue submission vector for MES
initialization tests as we do not want these to be cooperative
dispatches.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current SR-IOV will not set GC to off state, while it is a real
GC hard reset. Whthout GFX off flag, driver may do gfxhub invalidation
before firmware load and gfxhub gart enable. This operation may cause
CP to become busy because GC is not in the right state for invalidation.
[How]
Add a function for SR-IOV to clean up some sw state before recover. Set
adev->gfx.is_poweron to false to prevent gfxhub invalidation before gfx
firmware autoload complete.
Signed-off-by: Horace Chen <horace.chen@amd.com>
Reviewed-by: HaiJun Chang <HaiJun.Chang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Report current GFX clock also from average clock value as the original
CurrClock data is not valid/accurate any more as per FW team
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use colon to separate parameter name from their specific meaning.
silence the warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_vm_pt.c:793: warning: Function parameter or member 'adev' not described in 'amdgpu_vm_pte_update_noretry_flags'
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the second call to amdgpu_bo_create_kernel() fails, the memory
allocated from the first call should be cleared. If the third call
fails, the memory from the second call should be cleared.
Fixes: b95b539168 ("drm/amdgpu/psp: move PSP memory alloc from hw_init to sw_init")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
An instance of for_each_inst() was not changed to match its new
behaviour and is causing a loop.
v2: remove tmp_mask variable
Fixes: b579ea632f ("drm/amdgpu: Modify for_each_inst macro")
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
XCP_CTL register is expected to be programmed by firmware. Under certain
conditions FW may not have programmed it correctly. As a workaround,
program it when FW has not programmed the right values.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clang on RISC-V appears to be unaffected by the bug causing excessive
stack usage in calculate_bandwidth(). clang 16 with -fstack-usage
reports a 304 byte stack frame size with CONFIG_ARCH_RV32I, and 512
bytes with CONFIG_ARCH_RV64I.
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The VBIOS part number is read both in amdgpu_atom_parse() as well
as in atom_get_vbios_pn() and stored twice in the `struct atom_context`
structure. Remove the first unnecessary read and move the `pr_info`
line from that read into the second.
v2: squash in unused variable removal
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Recent code set xcp_id stored from file private data when opening
device to amdgpu bo for accounting memory usage etc, but not all
VMs are attached to this fpriv structure like the vm cases in
amdgpu_mes_self_test, otherwise, KASAN will complain below out
of bound access. And more importantly, VM code should not touch
fpriv structure, so drop fpriv code handling from amdgpu_vm_pt.
[ 77.292314] BUG: KASAN: slab-out-of-bounds in amdgpu_vm_pt_create+0x17e/0x4b0 [amdgpu]
[ 77.293845] Read of size 4 at addr ffff888102c48a48 by task modprobe/1069
[ 77.294146] Call Trace:
[ 77.294178] <TASK>
[ 77.294208] dump_stack_lvl+0x49/0x63
[ 77.294260] print_report+0x16f/0x4a6
[ 77.294307] ? amdgpu_vm_pt_create+0x17e/0x4b0 [amdgpu]
[ 77.295979] ? kasan_complete_mode_report_info+0x3c/0x200
[ 77.296057] ? amdgpu_vm_pt_create+0x17e/0x4b0 [amdgpu]
[ 77.297556] kasan_report+0xb4/0x130
[ 77.297609] ? amdgpu_vm_pt_create+0x17e/0x4b0 [amdgpu]
[ 77.299202] __asan_load4+0x6f/0x90
[ 77.299272] amdgpu_vm_pt_create+0x17e/0x4b0 [amdgpu]
[ 77.300796] ? amdgpu_init+0x6e/0x1000 [amdgpu]
[ 77.302222] ? amdgpu_vm_pt_clear+0x750/0x750 [amdgpu]
[ 77.303721] ? preempt_count_sub+0x18/0xc0
[ 77.303786] amdgpu_vm_init+0x39e/0x870 [amdgpu]
[ 77.305186] ? amdgpu_vm_wait_idle+0x90/0x90 [amdgpu]
[ 77.306683] ? kasan_set_track+0x25/0x30
[ 77.306737] ? kasan_save_alloc_info+0x1b/0x30
[ 77.306795] ? __kasan_kmalloc+0x87/0xa0
[ 77.306852] amdgpu_mes_self_test+0x169/0x620 [amdgpu]
v2: without specifying xcp partition for PD/PT bo, the xcp id is -1.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2686
Fixes: 3ebfd221c1 ("drm/amdkfd: Store xcp partition id to amdgpu bo")
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
file_priv needs to be setup firstly, otherwise, root PD
will always be allocated on partition 0, even if opening
the device from other partitions.
Fixes: 3ebfd221c1 ("drm/amdkfd: Store xcp partition id to amdgpu bo")
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add RLCG interface support for gfx v9.4.3 and multiple XCCs.
Do not enable it yet.
v2: Fix amdgpu_rlcg_reg_access_ctrl init, add support for multiple XCCs
in amdgpu_mm_wreg_mmio_rlc
v3: Use GET_INST() when indexing amdgpu_rlcg_reg_access_ctrl
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Update 128b/132b downspread factor to 0.3%
- Add helpers to get DMUB FW boot options
- Initialize necessary uninitialized variables
- Add stream overhead in BW calculations for 128b/132b
- Add link encoding to timing BW calculation parameters
- Prevent vtotal from being set to 0
- Fix race condition when turning off an output alone
- Keep PHY active for DP displays on DCN31
- Fix ASIC check in aux timeout workaround
- ABM pause toggle
- Add missing triggers for full updates
- Disable MPC split by default on special asic
- Add additional refresh rate conditions for SubVP cases
- Fix DP2 link training failure with RCO
- Reenable all root clock gating options
- Cache backlight_millinits in link structure and setting brightness accordingly
- Refine to decide the verified link setting
- Update SW cursor fallback for subvp high refresh
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Full update was missed for the following cases:
- Idle optimization is enabled
- Plane is not in current context
- Also don't clear surface updates at end of
commit_plane_for_stream_fast as they are cleared at
the beginning of each flip (only stream updates need
to be cleared in case there is no stream update in
the next flip)
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Allow ABM states to be transferred across display
adapters for smooth display transitions.
[how]
We call DMUB to pause and get ABM states. We
transfer data to other gpu, and deliver data and
ask ABM to un-pause.
Reviewed-by: Harry Vanzylldejong <harry.vanzylldejong@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Reza Amini <reza.amini@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There certain cases where the timing BW is dependent on the type of link
encoding in use. Thus to calculate the correct BW required for a given
timing, the link encoding should be added as a parameter.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current BW calculations do not account for the additional padding added
for uncompressed pixel-to-symbol packing.
This results in X.Y being too low for 128b/132b SST streams in certain
scenarios. If X.Y is too low, end user can observe image corruption.
[How]
Add function to calculate stream overhead to timing BW calculation for
128b/132b SST cases.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Setup stream encoder before link enable for TMDS
- Use is_dig_enable function instead of dcn10 hardcode
- Re-add aux intercept disable delay generically for 2+ LTTPRs
- Add polling method to handle MST reply packet
- Remove unused function
- Improve the include of header file
- Add missing static
- Hardcode vco_freq for dcn316
- Reduce stack size
- Skip enabling DMCUB when using emulation
- Check TG is non-null before checking if enabled
- Update scaler recout data for visual confirm
- Skip querying caps when DMCUB emulation is in use
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When 2 threads are doing commit_tail parallelly, one thread could
commit new streams to dc state but another thread remove it from dc
right away.
[How]
If we don't have new dm state change from commit_check, then we should
not call dc_commit_streams() in commit_tail. A new function
amdgpu_dm_commit_streams() is introduced to refator dc_commit_stream()
adjacent code and fix this issue.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Alan Liu <haoping.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Want to further constrain these refresh rate conditions for SubVP:
- SubVP + SubVP: either both <= 120Hz or both between 120-165Hz
- SubVP + DRR: SubVP <= 120Hz
- SubVP + VBlank: SubVP <= 120Hz
[How]
Add constraints in subvp_subvp_admissable(),
dcn32_subvp_drr_admissable() and dcn32_subvp_vblank_admissable()
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We return false by default when link training fail at link loss.
It will cause we get a fail verified link caps directly.
[HOW]
Record the highest verified link caps. Use the recorded value as
the verified link caps if it is not successful in the last attempt
to avoid to use the lowest link setting.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When RCO is enabled for symclk32_le we get failures during
DP2 link traing compliance tests.
[How]
Break out symclk32_le RCO into a separate function that is
called for hpo when link is enabled/disabled.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Need to save the cached backlight level so that display lights up using
appropriate brightness level instead of the default brightness when
waking up from s0i3.
[How]
Adding a backlight level cache in link structure. Also instead on
calling set_default_brightness_aux, check if cached values exists.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Workaround to avoid accessing DMCUB state too early if the emulator
is in use - we don't support any of the features the caps are querying
with emulation anyway.
[How]
Guard the query if emulation is in use.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Visual confirm color is not as expected for Autoa Color Management
feature test.
[How]
Calculate scaler recout data when visual confirm enabled to update
the visual confirm bar on the display.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is no need to calculate the VCO frequency. In our internal branch
we've hard-coded this for a while, so it's well-tested. This also allows
us to remove the now unused code for calculating the VCO frequency.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Alan Liu <haoping.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
