IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 3c1566bca3f8349f12b75d0a2d5e4a20ad6262ec ]
For kernels built with CONFIG_PREEMPT_RCU=y, the following scenario can
result in a NULL-pointer dereference:
CPU1 CPU2
rcu_preempt_deferred_qs_irqrestore rcu_print_task_exp_stall
if (special.b.blocked) READ_ONCE(rnp->exp_tasks) != NULL
raw_spin_lock_rcu_node
np = rcu_next_node_entry(t, rnp)
if (&t->rcu_node_entry == rnp->exp_tasks)
WRITE_ONCE(rnp->exp_tasks, np)
....
raw_spin_unlock_irqrestore_rcu_node
raw_spin_lock_irqsave_rcu_node
t = list_entry(rnp->exp_tasks->prev,
struct task_struct, rcu_node_entry)
(if rnp->exp_tasks is NULL, this
will dereference a NULL pointer)
The problem is that CPU2 accesses the rcu_node structure's->exp_tasks
field without holding the rcu_node structure's ->lock and CPU2 did
not observe CPU1's change to rcu_node structure's ->exp_tasks in time.
Therefore, if CPU1 sets rcu_node structure's->exp_tasks pointer to NULL,
then CPU2 might dereference that NULL pointer.
This commit therefore holds the rcu_node structure's ->lock while
accessing that structure's->exp_tasks field.
[ paulmck: Apply Frederic Weisbecker feedback. ]
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6bc6e6b27524304aadb9c04611ddb1c84dd7617a ]
The ref_scale_shutdown() kthread/function uses wait_event() to wait for
the refscale test to complete. However, although the read-side tests
are normally extremely fast, there is no law against specifying a very
large value for the refscale.loops module parameter or against having
a slow read-side primitive. Either way, this might well trigger the
hung-task timeout.
This commit therefore replaces those wait_event() calls with calls to
wait_event_idle(), which do not trigger the hung-task timeout.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5354b2af34064a4579be8bc0e2f15a7b70f14b5f ]
Previously, ext4_get_group_info() would treat an invalid group number
as BUG(), since in theory it should never happen. However, if a
malicious attaker (or fuzzer) modifies the superblock via the block
device while it is the file system is mounted, it is possible for
s_first_data_block to get set to a very large number. In that case,
when calculating the block group of some block number (such as the
starting block of a preallocation region), could result in an
underflow and very large block group number. Then the BUG_ON check in
ext4_get_group_info() would fire, resutling in a denial of service
attack that can be triggered by root or someone with write access to
the block device.
For a quality of implementation perspective, it's best that even if
the system administrator does something that they shouldn't, that it
will not trigger a BUG. So instead of BUG'ing, ext4_get_group_info()
will call ext4_error and return NULL. We also add fallback code in
all of the callers of ext4_get_group_info() that it might NULL.
Also, since ext4_get_group_info() was already borderline to be an
inline function, un-inline it. The results in a next reduction of the
compiled text size of ext4 by roughly 2k.
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230430154311.579720-2-tytso@mit.edu
Reported-by: syzbot+e2efa3efc15a1c9e95c3@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=69b28112e098b070f639efb356393af3ffec4220
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01e4ca29451760b9ac10b4cdc231c52150842643 ]
If EXT4_MB_HINT_GOAL_ONLY is set, ext4_mb_regular_allocator will only
allocate blocks from ext4_mb_find_by_goal. Allow to find by goal in
ext4_mb_find_by_goal if EXT4_MB_HINT_GOAL_ONLY is set or allocation
with EXT4_MB_HINT_GOAL_ONLY set will always fail.
EXT4_MB_HINT_GOAL_ONLY is not used at all, so the problem is not
found for now.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-3-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 5354b2af3406 ("ext4: allow ext4_get_group_info() to fail")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 949f95ff39bf188e594e7ecd8e29b82eb108f5bf ]
When we enable MMP in ext4_multi_mount_protect() during mount or
remount, we end up calling sb_start_write() from write_mmp_block(). This
triggers lockdep warning because freeze protection ranks above s_umount
semaphore we are holding during mount / remount. The problem is harmless
because we are guaranteed the filesystem is not frozen during mount /
remount but still let's fix the warning by not grabbing freeze
protection from ext4_multi_mount_protect().
Cc: stable@kernel.org
Reported-by: syzbot+6b7df7d5506b32467149@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=ab7e5b6f400b7778d46f01841422e5718fb81843
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230411121019.21940-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a44be64bbecb15a452496f60db6eacfee2b59c79 ]
When a file system currently mounted read/only is remounted
read/write, if we clear the SB_RDONLY flag too early, before the quota
is initialized, and there is another process/thread constantly
attempting to create a directory, it's possible to trigger the
WARN_ON_ONCE(dquot_initialize_needed(inode));
in ext4_xattr_block_set(), with the following stack trace:
WARNING: CPU: 0 PID: 5338 at fs/ext4/xattr.c:2141 ext4_xattr_block_set+0x2ef2/0x3680
RIP: 0010:ext4_xattr_block_set+0x2ef2/0x3680 fs/ext4/xattr.c:2141
Call Trace:
ext4_xattr_set_handle+0xcd4/0x15c0 fs/ext4/xattr.c:2458
ext4_initxattrs+0xa3/0x110 fs/ext4/xattr_security.c:44
security_inode_init_security+0x2df/0x3f0 security/security.c:1147
__ext4_new_inode+0x347e/0x43d0 fs/ext4/ialloc.c:1324
ext4_mkdir+0x425/0xce0 fs/ext4/namei.c:2992
vfs_mkdir+0x29d/0x450 fs/namei.c:4038
do_mkdirat+0x264/0x520 fs/namei.c:4061
__do_sys_mkdirat fs/namei.c:4076 [inline]
__se_sys_mkdirat fs/namei.c:4074 [inline]
__x64_sys_mkdirat+0x89/0xa0 fs/namei.c:4074
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230506142419.984260-1-tytso@mit.edu
Reported-by: syzbot+6385d7d3065524c5ca6d@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=6513f6cb5cd6b5fc9f37e3bb70d273b94be9c34c
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b50d5018ed06a647bb26c44bb5ae74e59c903c7 ]
This will allow more fine-grained errno codes to be returned by the
mount system call.
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: a44be64bbecb ("ext4: don't clear SB_RDONLY when remounting r/w until quota is re-enabled")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3bbef91bdd2180c67407285ba160b023eb4d5306 ]
The 'enable_quota' variable is only used in an CONFIG_QUOTA.
With CONFIG_QUOTA=n, compiler causes a harmless warning:
fs/ext4/super.c: In function ‘ext4_remount’:
fs/ext4/super.c:5840:6: warning: variable ‘enable_quota’ set but not used
[-Wunused-but-set-variable]
int enable_quota = 0;
^~~~~
Move 'enable_quota' into the same #ifdef CONFIG_QUOTA block
to remove an unused variable warning.
Signed-off-by: Austin Kim <austindh.kim@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210824034929.GA13415@raspberrypi
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: a44be64bbecb ("ext4: don't clear SB_RDONLY when remounting r/w until quota is re-enabled")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a6bef734247c7a8c19511664ff77634ab86f45b ]
Smatch complains that:
arcfb_probe() warn: 'irq' from request_irq() not released on lines: 587.
Fix error handling in the arcfb_probe() function. If IO addresses are
not provided or framebuffer registration fails, the code will jump to
the err_addr or err_register_fb label to release resources.
If IRQ request fails, previously allocated resources will be freed.
Fixes: 1154ea7dcd8e ("[PATCH] Framebuffer driver for Arc LCD board")
Signed-off-by: Zongjie Li <u202112089@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ff80028e2702c7c3d78b69705dc47c1ccba8c39 ]
drm_dp_dsc_sink_max_slice_count() may return 0 if something goes
wrong on the part of the DSC sink and its DPCD register. This null
value may be later used as a divisor in intel_dsc_compute_params(),
which will lead to an error.
In the unlikely event that this issue occurs, fix it by testing the
return value of drm_dp_dsc_sink_max_slice_count() against zero.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: a4a157777c80 ("drm/i915/dp: Compute DSC pipe config in atomic check")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418140430.69902-1-n.zhandarovich@fintech.ru
(cherry picked from commit 51f7008239de011370c5067bbba07f0207f06b72)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4c2e67c1773d2a2632381ee30e9139c1e744c16 ]
Clearing the PBA bit from the driver is race prone and it may lead to
dropped interrupt events. This could potentially lead to the traffic
being completely halted.
Fixes: 5e8c5adf95f8 ("gve: DQO: Add core netdev features")
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e05a5f510f26607616fecdd4ac136310c8bea56b ]
do_recvmmsg() can write to sk->sk_err from multiple threads.
As said before, many other points reading or writing sk_err
need annotations.
Fixes: 34b88a68f26a ("net: Fix use after free in the recvmmsg exit path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e72eeab542dbf4f544e389e64fa13b82a1b6d003 ]
I received a bug report (no reproducer so far) where we trip over
712 rcu_read_lock();
713 ct_hook = rcu_dereference(nf_ct_hook);
714 BUG_ON(ct_hook == NULL); // here
In nf_conntrack_destroy().
First turn this BUG_ON into a WARN. I think it was triggered
via enable_hooks=1 flag.
When this flag is turned on, the conntrack hooks are registered
before nf_ct_hook pointer gets assigned.
This opens a short window where packets enter the conntrack machinery,
can have skb->_nfct set up and a subsequent kfree_skb might occur
before nf_ct_hook is set.
Call nf_conntrack_init_end() to set nf_ct_hook before we register the
pernet ops.
Fixes: ba3fbe663635 ("netfilter: nf_conntrack: provide modparam to always register conntrack hooks")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc1c9fd4a8bbe1e06add9053010b652449bfe411 ]
This reverts "netfilter: nf_tables: skip netdev events generated on netns removal".
The problem is that when a veth device is released, the veth release
callback will also queue the peer netns device for removal.
Its possible that the peer netns is also slated for removal. In this
case, the device memory is already released before the pre_exit hook of
the peer netns runs:
BUG: KASAN: slab-use-after-free in nf_hook_entry_head+0x1b8/0x1d0
Read of size 8 at addr ffff88812c0124f0 by task kworker/u8:1/45
Workqueue: netns cleanup_net
Call Trace:
nf_hook_entry_head+0x1b8/0x1d0
__nf_unregister_net_hook+0x76/0x510
nft_netdev_unregister_hooks+0xa0/0x220
__nft_release_hook+0x184/0x490
nf_tables_pre_exit_net+0x12f/0x1b0
..
Order is:
1. First netns is released, veth_dellink() queues peer netns device
for removal
2. peer netns is queued for removal
3. peer netns device is released, unreg event is triggered
4. unreg event is ignored because netns is going down
5. pre_exit hook calls nft_netdev_unregister_hooks but device memory
might be free'd already.
Fixes: 68a3765c659f ("netfilter: nf_tables: skip netdev events generated on netns removal")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8efbdbfa99381a017dd2c0f6375a7d80a8118b74 ]
Initialize MAC_ONEUS_TIC_COUNTER register with correct value derived
from CSR clock, otherwise EEE is unstable on at least NXP i.MX8M Plus
and Micrel KSZ9131RNX PHY, to the point where not even ARP request can
be sent out.
i.MX 8M Plus Applications Processor Reference Manual, Rev. 1, 06/2021
11.7.6.1.34 One-microsecond Reference Timer (MAC_ONEUS_TIC_COUNTER)
defines this register as:
"
This register controls the generation of the Reference time (1 microsecond
tic) for all the LPI timers. This timer has to be programmed by the software
initially.
...
The application must program this counter so that the number of clock cycles
of CSR clock is 1us. (Subtract 1 from the value before programming).
For example if the CSR clock is 100MHz then this field needs to be programmed
to value 100 - 1 = 99 (which is 0x63).
This is required to generate the 1US events that are used to update some of
the EEE related counters.
"
The reset value is 0x63 on i.MX8M Plus, which means expected CSR clock are
100 MHz. However, the i.MX8M Plus "enet_qos_root_clk" are 266 MHz instead,
which means the LPI timers reach their count much sooner on this platform.
This is visible using a scope by monitoring e.g. exit from LPI mode on TX_CTL
line from MAC to PHY. This should take 30us per STMMAC_DEFAULT_TWT_LS setting,
during which the TX_CTL line transitions from tristate to low, and 30 us later
from low to high. On i.MX8M Plus, this transition takes 11 us, which matches
the 30us * 100/266 formula for misconfigured MAC_ONEUS_TIC_COUNTER register.
Configure MAC_ONEUS_TIC_COUNTER based on CSR clock, so that the LPI timers
have correct 1us reference. This then fixes EEE on i.MX8M Plus with Micrel
KSZ9131RNX PHY.
Fixes: 477286b53f55 ("stmmac: add GMAC4 core support")
Signed-off-by: Marek Vasut <marex@denx.de>
Tested-by: Harald Seiler <hws@denx.de>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Verdin iMX8MP
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Link: https://lore.kernel.org/r/20230506235845.246105-1-marex@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76c16d3e19446deea98b7883f261758b96b8781a ]
Using current implementation of polling mode, there is high chances we
will hit into timeout error when running phc2sys. Hence, update the
implementation of hardware crosstimestamping to use the MAC interrupt
service routine instead of polling for TSIS bit in the MAC Timestamp
Interrupt Status register to be set.
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 8efbdbfa9938 ("net: stmmac: Initialize MAC_ONEUS_TIC_COUNTER register")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 162bd18eb55adf464a0fa2b4144b8d61c75ff7c2 ]
Add return value for dim_calc_stats. This is an indication for the
caller if curr_stats was assigned by the function. Avoid using
curr_stats uninitialized over {rdma/net}_dim, when no time delta between
samples. Coverity reported this potential use of an uninitialized
variable.
Fixes: 4c4dbb4a7363 ("net/mlx5e: Move dynamic interrupt coalescing code to include/linux")
Fixes: cb3c7fd4f839 ("net/mlx5e: Support adaptive RX coalescing")
Signed-off-by: Roy Novich <royno@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://lore.kernel.org/r/20230507135743.138993-1-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9d36cf445ffff0b913ba187a3eff78028f9b1fb ]
When a tick broadcast clockevent device is initialized for one shot mode
then tick_broadcast_setup_oneshot() OR's the periodic broadcast mode
cpumask into the oneshot broadcast cpumask.
This is required when switching from periodic broadcast mode to oneshot
broadcast mode to ensure that CPUs which are waiting for periodic
broadcast are woken up on the next tick.
But it is subtly broken, when an active broadcast device is replaced and
the system is already in oneshot (NOHZ/HIGHRES) mode. Victor observed
this and debugged the issue.
Then the OR of the periodic broadcast CPU mask is wrong as the periodic
cpumask bits are sticky after tick_broadcast_enable() set it for a CPU
unless explicitly cleared via tick_broadcast_disable().
That means that this sets all other CPUs which have tick broadcasting
enabled at that point unconditionally in the oneshot broadcast mask.
If the affected CPUs were already idle and had their bits set in the
oneshot broadcast mask then this does no harm. But for non idle CPUs
which were not set this corrupts their state.
On their next invocation of tick_broadcast_enable() they observe the bit
set, which indicates that the broadcast for the CPU is already set up.
As a consequence they fail to update the broadcast event even if their
earliest expiring timer is before the actually programmed broadcast
event.
If the programmed broadcast event is far in the future, then this can
cause stalls or trigger the hung task detector.
Avoid this by telling tick_broadcast_setup_oneshot() explicitly whether
this is the initial switch over from periodic to oneshot broadcast which
must take the periodic broadcast mask into account. In the case of
initialization of a replacement device this prevents that the broadcast
oneshot mask is modified.
There is a second problem with broadcast device replacement in this
function. The broadcast device is only armed when the previous state of
the device was periodic.
That is correct for the switch from periodic broadcast mode to oneshot
broadcast mode as the underlying broadcast device could operate in
oneshot state already due to lack of periodic state in hardware. In that
case it is already armed to expire at the next tick.
For the replacement case this is wrong as the device is in shutdown
state. That means that any already pending broadcast event will not be
armed.
This went unnoticed because any CPU which goes idle will observe that
the broadcast device has an expiry time of KTIME_MAX and therefore any
CPUs next timer event will be earlier and cause a reprogramming of the
broadcast device. But that does not guarantee that the events of the
CPUs which were already in idle are delivered on time.
Fix this by arming the newly installed device for an immediate event
which will reevaluate the per CPU expiry times and reprogram the
broadcast device accordingly. This is simpler than caching the last
expiry time in yet another place or saving it before the device exchange
and handing it down to the setup function. Replacement of broadcast
devices is not a frequent operation and usually happens once somewhere
late in the boot process.
Fixes: 9c336c9935cf ("tick/broadcast: Allow late registered device to enter oneshot mode")
Reported-by: Victor Hassan <victor@allwinnertech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/87pm7d2z1i.ffs@tglx
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a7edd041f2d252f251523ba3f2eaead076a8f8d ]
Even when urgent BKOPS fails, the consumer will get stuck in runtime
suspend status. Like commit 1a5665fc8d7a ("scsi: ufs: core: WLUN suspend
SSU/enter hibern8 fail recovery"), trigger the error handler and return
-EBUSY to break the suspend.
Fixes: b294ff3e3449 ("scsi: ufs: core: Enable power management for wlun")
Signed-off-by: Keoseong Park <keosung.park@samsung.com>
Link: https://lore.kernel.org/r/20230425031721epcms2p5d4de65616478c967d466626e20c42a3a@epcms2p5
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27c1eaa07283b0c94becf8241f95368267cf558b ]
Should of_mdiobus_register() fail, a previous usb_get_dev() call should be
undone as in the .disconnect function.
Fixes: 04e37d92fbed ("net: phy: add marvell usb to mdio controller")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46dd6078dbc7e363a8bb01209da67015a1538929 ]
Fix kernel-doc warnings from the kernel test robot:
jornada720_ssp.c:24: warning: Function parameter or member 'jornada_ssp_lock' not described in 'DEFINE_SPINLOCK'
jornada720_ssp.c:24: warning: expecting prototype for arch/arm/mac(). Prototype was for DEFINE_SPINLOCK() instead
jornada720_ssp.c:34: warning: Function parameter or member 'byte' not described in 'jornada_ssp_reverse'
jornada720_ssp.c:57: warning: Function parameter or member 'byte' not described in 'jornada_ssp_byte'
jornada720_ssp.c:85: warning: Function parameter or member 'byte' not described in 'jornada_ssp_inout'
Link: lore.kernel.org/r/202304210535.tWby3jWF-lkp@intel.com
Fixes: 69ebb22277a5 ("[ARM] 4506/1: HP Jornada 7XX: Addition of SSP Platform Driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kristoffer Ericson <Kristoffer.ericson@gmail.com>
Cc: patches@armlinux.org.uk
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a26cc2934331b57b5a7164bff344f0a2ec245fc0 ]
After commit 3fb16866b51d ("driver core: fw_devlink: Make cycle
detection more robust"), fw_devlink prints an error when consumer
devices don't have their fwnode set. This used to be ignored silently.
Set the fwnode mipi_dsi_device so fw_devlink can find them and properly
track their dependencies.
This fixes errors like this:
[ 0.334054] nwl-dsi 30a00000.mipi-dsi: Failed to create device link with regulator-lcd-1v8
[ 0.346964] nwl-dsi 30a00000.mipi-dsi: Failed to create device link with backlight-dsi
Reported-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Link: https://lore.kernel.org/lkml/2a8e407f4f18c9350f8629a2b5fa18673355b2ae.camel@puri.sm/
Fixes: 068a00233969 ("drm: Add MIPI DSI bus support")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Link: https://lore.kernel.org/r/20230310063910.2474472-1-saravanak@google.com
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit da5e14909776edea4462672fb4a3007802d262e7 upstream.
[Why&How]
When skipping full modeset since the only state change was a front porch
change, the DC commit sequence requires extra checks to handle non
existant plane states being asked to be removed from context.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This triggers a -Wdeclaration-after-statement as the code has changed a
bit since upstream. It might be better to hoist the whole block up, but
this is a smaller change so I went with it.
arch/riscv/mm/init.c:755:16: warning: mixing declarations and code is a C99 extension [-Wdeclaration-after-statement]
unsigned long idx = pgd_index(__fix_to_virt(FIX_FDT));
^
1 warning generated.
Fixes: bbf94b042155 ("riscv: Move early dtb mapping into the fixmap region")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304300429.SXZOA5up-lkp@intel.com/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3899d94e3831ee07ea6821c032dc297aec80586a upstream.
When we receive a flush command (or "barrier" in DRBD), we currently use
a REQ_OP_FLUSH with the REQ_PREFLUSH flag set.
The correct way to submit a flush bio is by using a REQ_OP_WRITE without
any data, and set the REQ_PREFLUSH flag.
Since commit b4a6bb3a67aa ("block: add a sanity check for non-write
flush/fua bios"), this triggers a warning in the block layer, but this
has been broken for quite some time before that.
So use the correct set of flags to actually make the flush happen.
Cc: Christoph Hellwig <hch@infradead.org>
Cc: stable@vger.kernel.org
Fixes: f9ff0da56437 ("drbd: allow parallel flushes for multi-volume resources")
Reported-by: Thomas Voegtle <tv@lio96.de>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230503121937.17232-1-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 146a37e05d620cef4ad430e5d1c9c077fe6fa76f upstream.
There's a potential race before THRE/TEMT deasserts when DMA Tx is
starting up (or the next batch of continuous Tx is being submitted).
This can lead to misdetecting Tx empty condition.
It is entirely normal for THRE/TEMT to be set for some time after the
DMA Tx had been setup in serial8250_tx_dma(). As Tx side is definitely
not empty at that point, it seems incorrect for serial8250_tx_empty()
claim Tx is empty.
Fix the race by also checking in serial8250_tx_empty() whether there's
DMA Tx active.
Note: This fix only addresses in-kernel race mainly to make using
TCSADRAIN/FLUSH robust. Userspace can still cause other races but they
seem userspace concurrency control problems.
Fixes: 9ee4b83e51f74 ("serial: 8250: Add support for dmaengine")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230317113318.31327-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3eeca5e5f3100435b06a5b5d86daa3d135a8a4bd upstream.
The adreno_load_gpu() path is guarded by an error check on
adreno_load_fw(). This function is responsible for loading
Qualcomm-only-signed binaries (e.g. SQE and GMU FW for A6XX), but it
does not take the vendor-signed ZAP blob into account.
By embedding the SQE (and GMU, if necessary) firmware into the
initrd/kernel, we can trigger and unfortunate path that would not bail
out early and proceed with gpu->hw_init(). That will fail, as the ZAP
loader path will not find the firmware and return back to
adreno_load_gpu().
This error path involves pm_runtime_put_sync() which then calls idle()
instead of suspend(). This is suboptimal, as it means that we're not
going through the clean shutdown sequence. With at least A619_holi, this
makes the GPU not wake up until it goes through at least one more
start-fail-stop cycle. The pm_runtime_put_sync that appears in the error
path actually does not guarantee that because of the earlier enabling of
runtime autosuspend.
Fix that by using pm_runtime_put_sync_suspend to force a clean shutdown.
Test cases:
1. All firmware baked into kernel
2. error loading ZAP fw in initrd -> load from rootfs at DE start
Both succeed on A619_holi (SM6375) and A630 (SDM845).
Fixes: 0d997f95b70f ("drm/msm/adreno: fix runtime PM imbalance at gpu load")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/530001/
Link: https://lore.kernel.org/r/20230330231517.2747024-1-konrad.dybcio@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2a534e1d0d1591e951f9ece2fb460b2ff92edabd upstream.
In ext4_update_inline_data(), if ext4_xattr_ibody_get() fails for any
reason, it's best if we just fail as opposed to stumbling on,
especially if the failure is EFSCORRUPTED.
Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2220eaf90992c11d888fe771055d4de330385f01 upstream.
Normally the extended attributes in the inode body would have been
checked when the inode is first opened, but if someone is writing to
the block device while the file system is mounted, it's possible for
the inode table to get corrupted. Add bounds checking to avoid
reading beyond the end of allocated memory if this happens.
Reported-by: syzbot+1966db24521e5f6e23f7@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=1966db24521e5f6e23f7
Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4ce24f54d9cca4f09a395f3eecce20d6bec4663 upstream.
In no journal mode, ext4_finish_convert_inline_dir() can self-deadlock
by calling ext4_handle_dirty_dirblock() when it already has taken the
directory lock. There is a similar self-deadlock in
ext4_incvert_inline_data_nolock() for data files which we'll fix at
the same time.
A simple reproducer demonstrating the problem:
mke2fs -Fq -t ext2 -O inline_data -b 4k /dev/vdc 64
mount -t ext4 -o dirsync /dev/vdc /vdc
cd /vdc
mkdir file0
cd file0
touch file0
touch file1
attr -s BurnSpaceInEA -V abcde .
touch supercalifragilisticexpialidocious
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230507021608.1290720-1-tytso@mit.edu
Reported-by: syzbot+91dccab7c64e2850a4e5@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=ba84cc80a9491d65416bc7877e1650c87530fe8a
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4c0b4818b1f636bc96359f7817a2d8bab6370162 upstream.
If there are failures while changing the mount options in
__ext4_remount(), we need to restore the old mount options.
This commit fixes two problem. The first is there is a chance that we
will free the old quota file names before a potential failure leading
to a use-after-free. The second problem addressed in this commit is
if there is a failed read/write to read-only transition, if the quota
has already been suspended, we need to renable quota handling.
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230506142419.984260-2-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fa83c34e3e56b3c672af38059e066242655271b1 upstream.
When ext4_iomap_overwrite_begin() calls ext4_iomap_begin() map blocks may
fail for some reason (e.g. memory allocation failure, bare disk write), and
later because "iomap->type ! = IOMAP_MAPPED" triggers WARN_ON(). When ext4
iomap_begin() returns an error, it is normal that the type of iomap->type
may not match the expectation. Therefore, we only determine if iomap->type
is as expected when ext4_iomap_begin() is executed successfully.
Cc: stable@kernel.org
Reported-by: syzbot+08106c4b7d60702dbc14@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/00000000000015760b05f9b4eee9@google.com
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230505132429.714648-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 492888df0c7b42fc0843631168b0021bc4caee84 upstream.
When using cached extent stored in extent status tree in tree->cache_es
another process holding ei->i_es_lock for reading can be racing with us
setting new value of tree->cache_es. If the compiler would decide to
refetch tree->cache_es at an unfortunate moment, it could result in a
bogus in_range() check. Fix the possible race by using READ_ONCE() when
using tree->cache_es only under ei->i_es_lock for reading.
Cc: stable@kernel.org
Reported-by: syzbot+4a03518df1e31b537066@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/000000000000d3b33905fa0fd4a6@google.com
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230504125524.10802-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 92cc5d00a431e96e5a49c0b97e5ad4fa7536bd4b upstream.
Apparently despite it being marked inline, the compiler
may not inline __down_read_common() which makes it difficult
to identify the cause of lock contention, as the blocked
function in traceevents will always be listed as
__down_read_common().
So this patch adds __always_inline annotation to the common
function (as well as the inlined helper callers) to force it to
be inlined so the blocking function will be listed (via Wchan)
in traceevents.
Fixes: c995e638ccbb ("locking/rwsem: Fold __down_{read,write}*()")
Reported-by: Tim Murray <timmurray@google.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20230503023351.2832796-1-jstultz@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
