IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Several drivers use qcom_icc_rpmh_remove() as remove callback which
returns zero unconditionally. Make it return void and use .remove_new in
the drivers. There is no change in behaviour.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231015135955.1537751-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* icc-misc
interconnect: imx: Replace custom implementation of COUNT_ARGS()
interconnect: msm8974: Replace custom implementation of COUNT_ARGS()
interconnect: qcom: osm-l3: Replace custom implementation of COUNT_ARGS()
interconnect: fix error handling in qnoc_probe()
interconnect: imx: Replace inclusion of kernel.h in the header
dt-bindings: interconnect: qcom,rpmh: do not require reg on SDX65 MC virt
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add missing clk_disable_unprepare() and clk_bulk_disable_unprepare()
in the error path in qnoc_probe(). And when qcom_icc_qos_set() fails,
it needs remove nodes and disable clks.
Fixes: 2e2113c8a6 ("interconnect: qcom: rpm: Handle interface clocks")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230803130521.959487-1-yangyingliang@huawei.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add interconnect driver support for SDX75 platform.
* icc-sdx75
dt-bindings: interconnect: Add compatibles for SDX75
interconnect: qcom: Add SDX75 interconnect provider driver
Link: https://lore.kernel.org/r/1694614256-24109-1-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>anter a commit message to explain why this merge is necessary,
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes: d26a566744 ("interconnect: qcom: Add SM8350 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-11-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes: 6df5b34949 ("interconnect: qcom: Add SM8250 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-10-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes: a09b817c8b ("interconnect: qcom: Add SM8150 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-9-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes: b5d2f74107 ("interconnect: qcom: Add sdm845 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-7-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes: 46bdcac533 ("interconnect: qcom: Add SC7280 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-3-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes: 2d1f95ab9f ("interconnect: qcom: Add SC7180 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-2-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes: 1f51339f7d ("interconnect: qcom: Add QDU1000/QRU1000 interconnect driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-1-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
QCM2290 can support two memory configurations: single-channel, 32-bit
wide LPDDR3 @ up to 933MHz (bus clock) or dual-channel, 16-bit wide
LPDDR4X @ up to 1804 MHz. The interconnect driver in its current form
seems to gravitate towards the first one, however there are no LPDDR3-
equipped boards upstream and we still don't have a great way to discern
the DDR generations on the kernel side.
To make DDR scaling possible on the only currently-supported 2290
board, stick with the LPDDR4X config by default. The side effect on any
potential LPDDR3 board would be that the requested bus clock rate is
too high (but still capped to the firmware-configured FMAX).
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230726-topic-icc_coeff-v4-7-c04b60caa467@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This single node has its own clock which seems to be responsible for
transactions between CPUSS (CPU + some stuff) and the GNOC. See [1]
for reference.
Define it and hook it up.
[1] 02f8c342b2%5E%21/#F0
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230726-topic-icc_coeff-v4-5-c04b60caa467@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
If this hardware couldn't get messier, some nodes are supposed to drive
their own bus clock.. Presumably to connect to some intermediate
interface between the node itself and the bus it's (supposed to be)
connected to.
Expand the node struct with the necessary data and hook up the
allocations & calculations.
Note that the node-specific AB/IB coefficients contribute (by design)
to both the node-level and the bus-level aggregation.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230726-topic-icc_coeff-v4-3-c04b60caa467@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Presumably due to the hardware being so complex, some nodes (or busses)
have different (usually higher) requirements for bandwidth than what
the usual calculations would suggest.
Looking at the available downstream files, it seems like AB values are
adjusted per-bus and IB values are adjusted per-node.
With that in mind, introduce percentage-based coefficient struct members
and use them in the calculations.
One thing to note is that the IB coefficient is inverse (100/ib_percent)
which feels a bit backwards, but it's necessary for precision..
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230726-topic-icc_coeff-v4-1-c04b60caa467@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This series introduces interconnect debugfs files that support voting
for any interconnect path the framework supports. It is useful for debug,
test and verification.
* icc-debugfs
debugfs: Add write support to debugfs_create_str()
interconnect: Reintroduce icc_get()
interconnect: Add debugfs test client
Link: https://lore.kernel.org/r/20230807142914.12480-1-quic_mdtipton@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
It's often useful during test, debug, and development to issue path
votes from shell. Add a debugfs client for this purpose.
Example usage:
cd /sys/kernel/debug/interconnect/test-client/
# Configure node endpoints for the path from CPU to DDR on
# qcom/sm8550.
echo chm_apps > src_node
echo ebi > dst_node
# Get path between src_node and dst_node. This is only
# necessary after updating the node endpoints.
echo 1 > get
# Set desired BW to 1GBps avg and 2GBps peak.
echo 1000000 > avg_bw
echo 2000000 > peak_bw
# Vote for avg_bw and peak_bw on the latest path from "get".
# Voting for multiple paths is possible by repeating this
# process for different nodes endpoints.
echo 1 > commit
Allowing userspace to directly enable and set bus rates can be dangerous
So, following in the footsteps of the regmap [0] and clk [1] frameworks,
keep these userspace controls compile-time disabled without Kconfig
options to enable them. Enabling this will require code changes to
define INTERCONNECT_ALLOW_WRITE_DEBUGFS.
[0] commit 09c6ecd394 ("regmap: Add support for writing to regmap registers via debugfs")
[1] commit 37215da555 ("clk: Add support for setting clk_rate via debugfs")
Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com>
Link: https://lore.kernel.org/r/20230807142914.12480-4-quic_mdtipton@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The original icc_get() that took integer node IDs was removed due to
lack of users. Reintroduce a new version that takes string node names,
which is needed for the debugfs client.
Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com>
Link: https://lore.kernel.org/r/20230807142914.12480-3-quic_mdtipton@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
