IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
During concurrent mode(AP/STA + P2P), pass the mgmt frames received from
firmware to appropriate interface. Iterate the complete interface list
to pass frames on the interface which has registered to receive mgmt
frame. Added extra time for 'remain_on_ch' timer to ensure that timeout
for uncanceled remain_on_channel is not triggered & 'p2p_listen_state'
is not cleared before passing the mgmt frames to p2p interface.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Link: https://lore.kernel.org/r/20191018124511.22751-1-ajay.kathat@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "rates_len" value needs to be capped so that the memcpy() doesn't
copy beyond the end of the array.
Fixes: c5c77ba18ea6 ("staging: wilc1000: Add SDIO/SPI 802.11 driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Adham Abozaeid <adham.abozaeid@microchip.com>
Link: https://lore.kernel.org/r/20191017091832.GB31278@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In a fast disconnect/connect sequence, cfg80211_connect_result() can
fail to find the bss object which the driver is connecting to. Detailed
sequence of events:
* Driver is connected in STA mode
* Disconnect request arrives from user space. Driver disconnects and
calls cfg80211_disconnected() which adds new event to the
cfg80211_wq worker thread
* Connect request arrives from user space. cfg80211_connect() stores
ssid/ssid_len and calls rdev_connect()
* __cfg80211_disconnected() runs in worker thread and zero
wdev->ssid_len
* Connect succeeds. Driver calls cfg80211_connect_result() which fails
to find the bss because wdev->ssid_len is zero
To overcome this, upon connect request, store the bss object in the
driver and upon connect completion pass it to kernel using
cfg80211_connect_bss().
Ref: bcdd49b074d0 ("store bss object and use cfg80211_connect_bss()")
Signed-off-by: Adham Abozaeid <adham.abozaeid@microchip.com>
Link: https://lore.kernel.org/r/20191017165105.27429-1-adham.abozaeid@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove code valid only for 5 GHz, according to the TODO.
- find and remove remaining code valid only for 5 GHz. Most of the obvious
ones have been removed, but things like channel > 14 still exist.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20191024155918.13399-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix warnings of space required between operator and variables.
Issue detected by checkpatch tool
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Link: https://lore.kernel.org/r/20191017163126.23992-1-jbi.octave@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change "in to" in "Changing comments in to linux standred format" on
line 3 to "into"
Signed-off-by: Evan Chime <chime.evan.dri.devel@gmail.com>
Link: https://lore.kernel.org/r/20191018175725.GA8274@ik-ubuntu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bool initializations should use true and false. Bool tests don't need
comparisons. Based on contributions from Joe Perches, Rusty Russell
and Bruce W Allan.
The semantic patch that makes this report is available
in scripts/coccinelle/misc/boolinit.cocci.
More information about semantic patching is available at
http://coccinelle.lip6.fr/
Signed-off-by: Jamal Shareef <jamal.k.shareef@gmail.com>
Link: https://lore.kernel.org/r/20191024223937.2800-1-jamal.k.shareef@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/comedi/drivers/ni_routes.c:52:21: warning:
route_table_size defined but not used [-Wunused-const-variable=]
It is never used since introduction.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20191023075206.33088-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The build of xtensa allmodconfig gives warning of:
In function 'cfg80211_rtw_scan':
warning: the frame size of 1040 bytes is larger than 1024 bytes
Allocate memory for ssid dynamically to reduce the stack usage, as an
added benifit we can remove the memset by using kzalloc while allocating
memory.
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20191018101854.31876-1-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The build of xtensa allmodconfig gives warning of:
In function 'rtw_cfg80211_unlink_bss':
warning: the frame size of 1136 bytes is larger than 1024 bytes
Instead of having 'select_network' structure as a variable use it as a
pointer.
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20191018104837.23246-1-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is use of if..elseif..else condition which has same logic
in all three blocks.
Removed if..else block and placed log message instead that.
Signed-off-by: Aliasgar Surti <aliasgar.surti500@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/1571321906-15074-1-git-send-email-aliasgar.surti500@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `rtl8188eu` driver is built as a kmod in order to avoid symbol
conflicts (at link-time) with other Realtek drivers.
Internally, we use this driver as builtin [vs kmod], and we've identified
the `efuse_power_switch()` symbol to be conflicting at link-time with the
one from the `rtlwifi` driver.
An alternative solution would have been to rename the function, but it
doesn't look like it's being used outside of this driver, so just make it
static.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20191016065834.12186-1-alexandru.ardelean@analog.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20191016085833.26376-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20191016090136.20620-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20191016090305.23392-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert the local variables max_ampdu_len and min_mpdu_spacing from
unsigned char to u8 and remove unnecessary castings to u8 pointer.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20191015154535.27979-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since wfx_tx_get_raw_link_id() return an unsigned, it makes no sense to
return a negative value. "15" is a better value since it is used by
firmware for stations that have not yet associated link-ids.
Note that this should never happens since driver set max_ap_assoc_sta
to 14.
Fixes: 9bca45f3d692 ("staging: wfx: allow to send 802.11 frames")
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20191011101639.31025-1-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Comparsions evaluate to bool, explicit conversion with ternary
operator is overly verbose and unnecessary, so remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20191013131249.34422-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove braces from single statement if block to comply with kernel
coding style. Reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20191013131249.34422-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove variables that are only used to hold and return constants and
have the functions directly return the constants.
Issue found by coccinelle:
@@
local idexpression ret;
expression e;
@@
-ret =
+return
e;
-return ret;
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Link: https://lore.kernel.org/r/f61a0f036af24228c682c6b12c3a8e6cf6736185.1570918228.git.wambui.karugax@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
