IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This patch replaces ->mode_fixup() with ->atomic_check() so that
a full modeset can be requested from there when crtc_state->active
is changed to be true(which implies only connector's DPMS is brought
out of "Off" status, though not necessarily). Bridge functions are
added or changed to accommodate the ->atomic_check() callback. That
full modeset is needed by the up-coming patch which gets MIPI DSI
controller and PHY ready in ->mode_set(), because it makes sure
->mode_set() and ->atomic_disable() are called in pairs.
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1619170003-4817-2-git-send-email-victor.liu@nxp.com
[why]
DP 1.4a spec mandates that if DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT is
set, Extended Base Receiver Capability DPCD space must be used. Without
doing that, the three DPCD values that differ will be wrong, leading to
incorrect or limited functionality. MST link rate, for example, could
have a lower value. Also, Synaptics quirk wouldn't work out well when
Extended DPCD was not read, resulting in no DSC for such hubs.
[how]
Modify MST topology manager to use the values from Extended DPCD where
applicable.
To prevent regression on the sources that have a lower maximum link rate
capability than MAX_LINK_RATE from Extended DPCD, have the drivers
supply maximum lane count and rate at initialization time.
This also reverts commit 2dcab875e763 ("Revert drm/dp_mst: Retrieve
extended DPCD caps for topology manager"), brining the change back to the
original commit ad44c03208e4 ("drm/dp_mst: Retrieve extended DPCD caps for
topology manager").
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429221151.22020-2-nikola.cornij@amd.com
Add support to overlay plane, in addition to primary and cursor
planes. In this approach, the plane composition still requires an
active primary plane and planes are composed associatively in the
order: (primary <- overlay) <- cursor
It enables to run the following IGT tests successfully:
- kms_plane_cursor:
- pipe-A-[overlay, primary, viewport]-size-[64, 128, 256]
- kms_atomic:
- plane-overlay-legacy
and preserves the successful execution of kms_cursor_crc,
kms_writeback and kms_flip
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/8261bf93d8a0e3ffaf81d8e7c9b3e9c229116be3.1619250933.git.melissa.srw@gmail.com
Add support for composing XRGB888 planes in addition to the ARGB8888
format. In the case of an XRGB plane at the top, the composition consists
of copying the RGB values of a pixel from src to dst and clearing alpha
channel, without the need for alpha blending operations for each pixel.
Blend equations assume a completely opaque background, i.e., primary plane
is not cleared before pixel blending but alpha channel is explicitly
opaque (a = 0xff). Also, there is room for performance evaluation in
switching pixel blend operation according to the plane format.
v4:
- clear alpha channel (0xff) after blend color values by pixel
- improve comments on blend ops to reflect the current state
- describe in the commit message future improvements for plane composition
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/07bcf4643d11da9480599fe1b165e478bff58b25.1619250933.git.melissa.srw@gmail.com
Struct drm_device.pdev is being moved to legacy status as only legacy
DRM drivers use it. A possible follow-up patchset could remove pdev
entirely.
v4:
* rebased
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429105101.25667-6-tzimmermann@suse.de
Using struct drm_device.pdev is deprecated. Don't assign it. Users
should upcast from struct drm_device.dev.
v6:
* also fix the assignment in selftests in this patch (Chris)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429105101.25667-5-tzimmermann@suse.de
References to struct drm_device.pdev should not be used any longer as
the field will be moved into the struct's legacy section. Fix a rsp
comment.
v8:
* fix commit message (Michael)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429105101.25667-4-tzimmermann@suse.de
References to struct drm_device.pdev should not be used any longer as
the field will be moved into the struct's legacy section. Add a fix
for the rsp commit.
v8:
* fix commit message (Michael)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Fixes: a50ca39fbd01 ("drm/i915: setup the LMEM region")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Cc: "Michał Winiarski" <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429105101.25667-3-tzimmermann@suse.de
Using struct drm_device.pdev is deprecated. Upcast with to_pci_dev()
from struct drm_device.dev to get the PCI device structure.
v9:
* fix remaining pdev references
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Fixes: ba4e0339a6a3 ("drm/ast: Fixed CVE for DP501")
Cc: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210429105101.25667-2-tzimmermann@suse.de
idr_init() uses base 0 which is an invalid identifier for this driver.
The idr_alloc for this driver uses 1 as start value for ID range. The
new function idr_init_base allows IDR to set the ID lookup from base 1.
This avoids all lookups that otherwise starts from 0 since 0 is always
unused / available.
References: commit 6ce711f27500 ("idr: Make 1-based IDRs more efficient")
Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105190718.GA89863@localhost
Use min_t to replace min, min_t is a bit fast because min use
twice typeof.
This patch also fix check_patch.pl warning:
WARNING: min() should probably be min_t(unsigned long, num_pages,
VMW_PPN_PER_REMAP)
+unsigned long nr = min(num_pages, (unsigned long)
VMW_PPN_PER_REMAP);
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201119011146.107587-1-bernard@vivo.com
Cppcheck complains that the declaration doesn't match the function
definition. Obviously "left" should come before "right". The caller
and the function implementation are done this way, it's just the
declaration which is wrong so this doesn't affect runtime.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/YH/720FD978TPhHp@mwanda
>From anx7625 spec, the delay between powering on power supplies and gpio
should be larger than 10ms.
Fixes: 6c744983004e ("drm/bridge: anx7625: disable regulators when power off")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210428115116.931328-1-hsinyi@chromium.org
And finally, convert all of the code in drm_dp_mst_topology.c over to using
drm_err() and drm_dbg*(). Note that this refactor would have been a lot
more complicated to have tried writing a coccinelle script for, so this
whole thing was done by hand.
v2:
* Fix line-wrapping in drm_dp_mst_atomic_check_mstb_bw_limit()
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-18-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
Next step in the conversion, move everything in drm_dp_dual_mode_helper.c
over to using drm_err() and drm_dbg_kms(). This was done using the
following cocci script:
@@
expression list expr;
@@
(
- DRM_DEBUG_KMS(expr);
+ drm_dbg_kms(dev, expr);
|
- DRM_ERROR(expr);
+ drm_err(dev, expr);
)
And correcting the indentation of the resulting code by hand.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-17-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
Now that we've added a back-pointer to drm_device to drm_dp_aux, made
drm_dp_aux available to any functions in drm_dp_helper.c which need to
print to the kernel log, and ensured all of our logging uses a consistent
format, let's do the final step of the conversion and actually move
everything over to using drm_err() and drm_dbg_*().
This was done by using the following cocci script:
@@
expression list expr;
@@
(
- DRM_DEBUG_KMS(expr);
+ drm_dbg_kms(aux->drm_dev, expr);
|
- DRM_DEBUG_DP(expr);
+ drm_dbg_dp(aux->drm_dev, expr);
|
- DRM_DEBUG_ATOMIC(expr);
+ drm_dbg_atomic(aux->drm_dev, expr);
|
- DRM_DEBUG_KMS_RATELIMITED(expr);
+ drm_dbg_kms_ratelimited(aux->drm_dev, expr);
|
- DRM_ERROR(expr);
+ drm_err(aux->drm_dev, expr);
)
Followed by correcting the resulting line-wrapping in the results by hand.
v2:
* Fix indenting in drm_dp_dump_access
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-16-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
While this shouldn't really be something that happens all that often, since
we're going to be using the drm_dbg_* log helpers in DRM helpers it's
technically possible that a driver could use an AUX adapter before it's
been associated with it's respective drm_device. While drivers should take
care to avoid this, there's likely going to be situations where it's
difficult to workaround. And since other logging helpers in the kernel tend
to be OK with NULL pointers (for instance, passing a NULL pointer to a "%s"
argument for a printk-like function in the kernel doesn't break anything),
we should do the same for ours.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-15-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
Since this is one of the few functions in drm_dp_mst_topology.c that
doesn't have any way of getting access to a drm_device, let's pass the
drm_dp_mst_topology_mgr down to this function so that it can use
drm_dbg_kms().
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-14-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
Since we're about to be using drm_dbg_*() throughout the DP helpers, we'll
need to be able to access the DRM device in the dual mode DP helpers as
well. Note however that since drm_dp_dual_mode_detect() can be called with
DDC adapters that aren't part of a drm_dp_aux struct, we need to pass down
the drm_device to these functions instead of using drm_dp_aux.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-9-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
Since we're about to convert everything in drm_dp_helper.c over to using
drm_dbg_*(), let's also make our logging more consistent in drm_dp_helper.c
while we're at it to ensure that we always print the name of the AUX
channel in question.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-8-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
So that we can start using drm_dbg_*() for
drm_dp_link_train_channel_eq_delay() and
drm_dp_lttpr_link_train_channel_eq_delay().
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-7-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
So that we can start using drm_dbg_*() in
drm_dp_link_train_clock_recovery_delay().
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-6-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
The docs we had for drm_dp_aux_init() and drm_dp_aux_register() were mostly
correct, except for the fact that they made the assumption that all AUX
devices were grandchildren of their respective DRM devices. This is the
case for most normal GPUs, but is almost never the case with SoCs and
display bridges. So, let's fix this documentation to clarify when the right
time to use drm_dp_aux_init() or drm_dp_aux_register() is.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-5-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
This is something that we've wanted for a while now: the ability to
actually look up the respective drm_device for a given drm_dp_aux struct.
This will also allow us to transition over to using the drm_dbg_*() helpers
for debug message printing, as we'll finally have a drm_device to reference
for doing so.
Note that there is one limitation with this - because some DP AUX adapters
exist as platform devices which are initialized independently of their
respective DRM devices, one cannot rely on drm_dp_aux->drm_dev to always be
non-NULL until drm_dp_aux_register() has been called. We make sure to point
this out in the documentation for struct drm_dp_aux.
v3:
* Add WARN_ON_ONCE() to drm_dp_aux_register() if drm_dev isn't filled out
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-4-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
On bochs DRM driver, the execution of "setterm --blank force" results
in a frozen screen instead of a blank screen. It's due to the lack of
the screen blanking support in its code.
Actually, the QEMU bochs vga side can switch to the blanking mode when
the bit 0x20 is cleared on VGA_ATT_IW register (0x3c0), which updates
ar_index in QEMU side. So, essentially, we'd just need to clear the
bit at pipe disable callback; that's what this patch does essentially.
However, a tricky part is that the access via VGA_ATT_IW is done in
"flip-flop"; the first write is for index and the second write is for
the data like palette. Meanwhile, in the current bochs DRM driver,
the flip-flop wasn't considered, and it calls only the register update
once with the value 0x20.
The spec and the actual VGA implementation in QEMU suggests that the
flip flop flag is discarded by reading the CRTC index register
(VGA_IS1_RC, 0x3da). So, in this patch, we add the helper to read a
byte and the call to clear the flip flop flag before changing the
blank / unblank setup via VGA_ATT_IW register.
v1->v2:
* discard ar_flip_flop by reading 0x3da, add bochs_vga_readb()
* include video/vga.h for VGA register definitions
* move the blank/unblank code to bochs_hw_blank()
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421080859.14869-1-tiwai@suse.de
[Bug][DP501]
If ASPEED P2A (PCI to AHB) bridge is disabled and disallowed for
CVE_2019_6260 item3, and then the monitor's EDID is unable read through
Parade DP501.
The reason is the DP501's FW is mapped to BMC addressing space rather
than Host addressing space.
The resolution is that using "pci_iomap_range()" maps to DP501's FW that
stored on the end of FB (Frame Buffer).
In this case, FrameBuffer reserves the last 2MB used for the image of
DP501.
Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421085859.17761-1-kuohsiang_chou@aspeedtech.com
The commit 7cbb93d89838 ("drm/ast: Use managed pci functions")
converted a few PCI accessors to the managed API and dropped the
manual pci_iounmap() calls, but it seems to have forgotten converting
pci_iomap() to the managed one. It resulted in the leftover resources
after the driver unbind. Let's fix them.
Fixes: 7cbb93d89838 ("drm/ast: Use managed pci functions")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421170458.21178-1-tiwai@suse.de
