IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 3e46c89c74f2c38e5337d2cf44b0b551adff1cb4 ]
the variable 'history' is of type u16, it may be an error
that the hweight32 macro was used for it
I guess macro hweight16 should be used
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 2a81490811d0 ("writeback: implement foreign cgroup inode detection")
Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230119104443.3002-1-korotkov.maxim.s@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c88f8d5cd95fd039cff95d682b8e71100c001df0 ]
When a tunnel device is bound with the underlying device, its
dev->needed_headroom needs to be updated properly. IPv4 tunnels
already do the same in ip_tunnel_bind_dev(). Otherwise we may
not have enough header room for skb, especially after commit
b17f709a2401 ("gue: TX support for using remote checksum offload option").
Fixes: 32b8a8e59c9c ("sit: add IPv4 over IPv4 support")
Reported-by: Palash Oswal <oswalpalash@gmail.com>
Link: https://lore.kernel.org/netdev/CAGyP=7fDcSPKu6nttbGwt7RXzE3uyYxLjCSE97J64pRxJP8jPA@mail.gmail.com/
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f75cd166a5a3c0bc50441faa8b8304f60522fdd ]
ncsi_channel_is_tx() determines whether a given channel should be
used for Tx or not. However, when reconfiguring the channel by
handling a Configuration Required AEN, there is a misjudgment that
the channel Tx has already been enabled, which results in the Enable
Channel Network Tx command not being sent.
Clear the channel Tx enable flag before reconfiguring the channel to
avoid the misjudgment.
Fixes: 8d951a75d022 ("net/ncsi: Configure multi-package, multi-channel modes with failover")
Signed-off-by: Cosmo Chou <chou.cosmo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5749639f2d0a1f6cbe187d05f70c2e7c544d748 ]
In qedi_probe() we call __qedi_probe() which initializes
&qedi->recovery_work with qedi_recovery_handler() and
&qedi->board_disable_work with qedi_board_disable_work().
When qedi_schedule_recovery_handler() is called, schedule_delayed_work()
will finally start the work.
In qedi_remove(), which is called to remove the driver, the following
sequence may be observed:
Fix this by finishing the work before cleanup in qedi_remove().
CPU0 CPU1
|qedi_recovery_handler
qedi_remove |
__qedi_remove |
iscsi_host_free |
scsi_host_put |
//free shost |
|iscsi_host_for_each_session
|//use qedi->shost
Cancel recovery_work and board_disable_work in __qedi_remove().
Fixes: 4b1068f5d74b ("scsi: qedi: Add MFW error recovery process")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Link: https://lore.kernel.org/r/20230413033422.28003-1-zyytlz.wz@163.com
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8c5d45f82ce0c238a4817739892fe8897a3dcc3 ]
In verity_end_io(), if bi_status is not BLK_STS_OK, it can be return
directly. But if FEC configured, it is desired to correct the data page
through verity_verify_io. And the return value will be converted to
blk_status and passed to verity_finish_io().
BTW, when a bit is set in v->validated_blocks, verity_verify_io() skips
verification regardless of I/O error for the corresponding bio. In this
case, the I/O error could not be returned properly, and as a result,
there is a problem that abnormal data could be read for the
corresponding block.
To fix this problem, when an I/O error occurs, do not skip verification
even if the bit related is set in v->validated_blocks.
Fixes: 843f38d382b1 ("dm verity: add 'check_at_most_once' option to only validate hashes once")
Cc: stable@vger.kernel.org
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Yeongjin Gil <youngjin.gil@samsung.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c0468e054c0adb660ac055fc396622ec7235df9 ]
Without FEC, dm-verity won't call verity_handle_err() when I/O fails,
but with FEC enabled, it currently does even if an I/O error has
occurred.
If there is an I/O error and FEC correction fails, return the error
instead of calling verity_handle_err() again.
Suggested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Akilesh Kailash <akailash@google.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Stable-dep-of: e8c5d45f82ce ("dm verity: fix error handling for check_at_most_once on FEC")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f72f805e72882c361e2a612c64a6e549f3da7152 ]
If child mailbox node status is disabled it causes
crash in interrupt handler. Fix this by assigning
only available child node during driver probe.
Fixes: 4981b82ba2ff ("mailbox: ZynqMP IPI mailbox controller")
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230311012407.1292118-2-tanmay.shah@amd.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 043f85ce81cb1714e14d31c322c5646513dde3fb ]
Using flexible array is more straight forward. It
- saves 1 pointer in the 'zynqmp_ipi_pdata' structure
- saves an indirection when using this array
- saves some LoC and avoids some always spurious pointer arithmetic
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Stable-dep-of: f72f805e7288 ("mailbox: zynqmp: Fix counts of child nodes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45121ad4a1750ca47ce3f32bd434bdb0cdbf0043 ]
The PSP IRQ is edge-triggered (MSI or MSI-X) in all cases supported by
the psp module so clear the interrupt status register early in the
handler to prevent missed interrupts. sev_irq_handler() calls wake_up()
on a wait queue, which can result in a new command being submitted from
a different CPU. This then races with the clearing of isr and can result
in missed interrupts. A missed interrupt results in a command waiting
until it times out, which results in the psp being declared dead.
This is unlikely on bare metal, but has been observed when running
virtualized. In the cases where this is observed, sev->cmdresp_reg has
PSP_CMDRESP_RESP set which indicates that the command was processed
correctly but no interrupt was asserted.
The full sequence of events looks like this:
CPU 1: submits SEV cmd #1
CPU 1: calls wait_event_timeout()
CPU 0: enters psp_irq_handler()
CPU 0: calls sev_handler()->wake_up()
CPU 1: wakes up; finishes processing cmd #1
CPU 1: submits SEV cmd #2
CPU 1: calls wait_event_timeout()
PSP: finishes processing cmd #2; interrupt status is still set; no interrupt
CPU 0: clears intsts
CPU 0: exits psp_irq_handler()
CPU 1: wait_event_timeout() times out; psp_dead=true
Fixes: 200664d5237f ("crypto: ccp: Add Secure Encrypted Virtualization (SEV) command support")
Cc: stable@vger.kernel.org
Signed-off-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c339fb4d8577792378136c15fde773cfb863cb8 ]
In ring_buffer_reset_online_cpus, the buffer_size_kb write operation
may permanently fail if the cpu_online_mask changes between two
for_each_online_buffer_cpu loops. The number of increases and decreases
on both cpu_buffer->resize_disabled and cpu_buffer->record_disabled may be
inconsistent, causing some CPUs to have non-zero values for these atomic
variables after the function returns.
This issue can be reproduced by "echo 0 > trace" while hotplugging cpu.
After reproducing success, we can find out buffer_size_kb will not be
functional anymore.
To prevent leaving 'resize_disabled' and 'record_disabled' non-zero after
ring_buffer_reset_online_cpus returns, we ensure that each atomic variable
has been set up before atomic_sub() to it.
Link: https://lore.kernel.org/linux-trace-kernel/20230426062027.17451-1-Tze-nan.Wu@mediatek.com
Cc: stable@vger.kernel.org
Cc: <mhiramat@kernel.org>
Cc: npiggin@gmail.com
Fixes: b23d7a5f4a07 ("ring-buffer: speed up buffer resets by avoiding synchronize_rcu for each CPU")
Reviewed-by: Cheng-Jui Wang <cheng-jui.wang@mediatek.com>
Signed-off-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 094fb49a2d0d6827c86d2e0840873e6db0c491d2 ]
If userspace races tcsetattr() with a write, the drained condition
might not be guaranteed by the kernel. There is a race window after
checking Tx is empty before tty_set_termios() takes termios_rwsem for
write. During that race window, more characters can be queued by a
racing writer.
Any ongoing transmission might produce garbage during HW's
->set_termios() call. The intent of TCSADRAIN/FLUSH seems to be
preventing such a character corruption. If those flags are set, take
tty's write lock to stop any writer before performing the lower layer
Tx empty check and wait for the pending characters to be sent (if any).
The initial wait for all-writers-done must be placed outside of tty's
write lock to avoid deadlock which makes it impossible to use
tty_wait_until_sent(). The write lock is retried if a racing write is
detected.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230317113318.31327-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ffa6e344a1c92a27c242f500fc74e6eb361a4bc ]
There are a lot of tty-core-only functions that are listed in
include/linux/tty.h. Move them to drivers/tty/tty.h so that no one else
can accidentally call them or think that they are public functions.
Cc: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20210408125134.3016837-14-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 094fb49a2d0d ("tty: Prevent writing chars during tcsetattr TCSADRAIN/FLUSH")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f72cab1596327e1011ab4599c07b165e0fb45db ]
The flow change and restricted_tty_write() logic is internal to the tty
core only, so move it out of the include/linux/tty.h file.
Cc: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20210408125134.3016837-12-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 094fb49a2d0d ("tty: Prevent writing chars during tcsetattr TCSADRAIN/FLUSH")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c80c0b94b94192d9a34b400f8237703c6475f4d ]
Move the TTY_LOCK_* enums and tty_ldisc lock functions out of the global
tty.h into the local header file to clean things up.
Cc: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20210408125134.3016837-10-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 094fb49a2d0d ("tty: Prevent writing chars during tcsetattr TCSADRAIN/FLUSH")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da5d669e00d2c437b3f508d60add417fc74f4bb6 ]
The functions tty_audit_add_data() and tty_audit_tiocsti() are local to
the tty core code, and do not need to be in a "kernel-wide" header file
so move them to drivers/tty/tty.h
Cc: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20210408125134.3016837-9-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 094fb49a2d0d ("tty: Prevent writing chars during tcsetattr TCSADRAIN/FLUSH")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98602c010ceba82f2c2384122dbd07bc965fd367 ]
There are a number of functions and #defines in include/linux/tty.h that
do not belong there as they are private to the tty core code.
Create an initial drivers/tty/tty.h file and copy the odd "tty logging"
macros into it to seed the file with some initial things that we know
nothing outside of the tty core should be calling.
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20210408125134.3016837-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 094fb49a2d0d ("tty: Prevent writing chars during tcsetattr TCSADRAIN/FLUSH")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c1592a89942e9678f7d9c8030efa777c0d57edab upstream.
Toggle deleted anonymous sets as inactive in the next generation, so
users cannot perform any update on it. Clear the generation bitmask
in case the transaction is aborted.
The following KASAN splat shows a set element deletion for a bound
anonymous set that has been already removed in the same transaction.
[ 64.921510] ==================================================================
[ 64.923123] BUG: KASAN: wild-memory-access in nf_tables_commit+0xa24/0x1490 [nf_tables]
[ 64.924745] Write of size 8 at addr dead000000000122 by task test/890
[ 64.927903] CPU: 3 PID: 890 Comm: test Not tainted 6.3.0+ #253
[ 64.931120] Call Trace:
[ 64.932699] <TASK>
[ 64.934292] dump_stack_lvl+0x33/0x50
[ 64.935908] ? nf_tables_commit+0xa24/0x1490 [nf_tables]
[ 64.937551] kasan_report+0xda/0x120
[ 64.939186] ? nf_tables_commit+0xa24/0x1490 [nf_tables]
[ 64.940814] nf_tables_commit+0xa24/0x1490 [nf_tables]
[ 64.942452] ? __kasan_slab_alloc+0x2d/0x60
[ 64.944070] ? nf_tables_setelem_notify+0x190/0x190 [nf_tables]
[ 64.945710] ? kasan_set_track+0x21/0x30
[ 64.947323] nfnetlink_rcv_batch+0x709/0xd90 [nfnetlink]
[ 64.948898] ? nfnetlink_rcv_msg+0x480/0x480 [nfnetlink]
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 44750f153699b6e4f851a399287e5c8df208d696 upstream.
While stressing EAS on my dragonboard RB3, I have noticed that LITTLE cores
where never selected as the most energy efficient CPU whatever the
utilization level of waking task.
energy model framework uses its cost field to estimate the energy with
the formula:
nrg = cost of the selected OPP * utilization / CPU's max capacity
which ends up selecting the CPU with lowest cost / max capacity ration
as long as the utilization fits in the OPP's capacity.
If we compare the cost of a little OPP with similar capacity of a big OPP
like :
OPP(kHz) OPP capacity cost max capacity cost/max capacity
LITTLE 1766400 407 351114 407 863
big 1056000 408 520267 1024 508
This can be interpreted as the LITTLE core consumes 70% more than big core
for the same compute capacity.
According to [1], LITTLE consumes 10% less than big core for Coremark
benchmark at those OPPs. If we consider that everything else stays
unchanged, the dynamic-power-coefficient of LITTLE core should be
only 53% of the current value: 290 * 53% = 154
Set the dynamic-power-coefficient of CPU0-3 to 154 to fix the energy model.
[1] https://github.com/kdrag0n/freqbench/tree/master/results/sdm845/main
Fixes: 0e0a8e35d725 ("arm64: dts: qcom: sdm845: correct dynamic power coefficients")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230106164618.1845281-1-vincent.guittot@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 357ad4d898286b94aaae0cb7e3f573459e5b98b9 upstream.
We observed: 'dmasound_setup' defined but not used error with
COMPILER=gcc ARCH=m68k DEFCONFIG=allmodconfig build.
Fix it by adding __maybe_unused to dmasound_setup.
Error(s):
sound/oss/dmasound/dmasound_core.c:1431:12: error: 'dmasound_setup' defined but not used [-Werror=unused-function]
Fixes: 9dd7c46346ca ("sound/oss/dmasound: fix build when drivers are mixed =y/=m")
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220414091940.2216-1-miles.chen@mediatek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0af462f19e635ad522f28981238334620881badc upstream.
The recent fix to ensure atomicity of lookup and allocation inadvertently
broke the pool refill mechanism.
Prior to that change debug_objects_activate() and debug_objecs_assert_init()
invoked debug_objecs_init() to set up the tracking object for statically
initialized objects. That's not longer the case and debug_objecs_init() is
now the only place which does pool refills.
Depending on the number of statically initialized objects this can be
enough to actually deplete the pool, which was observed by Ido via a
debugobjects OOM warning.
Restore the old behaviour by adding explicit refill opportunities to
debug_objects_activate() and debug_objecs_assert_init().
Fixes: 63a759694eed ("debugobject: Prevent init race with static objects")
Reported-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/871qk05a9d.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 59b37fe52f49955791a460752c37145f1afdcad1 upstream.
Instead of reloading the shadow call stack pointer from the ordinary
stack, which may be vulnerable to the kind of gadget based attacks
shadow call stacks were designed to prevent, let's store a task's shadow
call stack pointer in the task struct when switching to the shadow IRQ
stack.
Given that currently, the task_struct::scs_sp field is only used to
preserve the shadow call stack pointer while a task is scheduled out or
running in user space, reusing this field to preserve and restore it
while running off the IRQ stack must be safe, as those occurrences are
guaranteed to never overlap. (The stack switching logic only switches
stacks when running from the task stack, and so the value being saved
here always corresponds to the task mode shadow stack)
While at it, fold a mov/add/mov sequence into a single add.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230109174800.3286265-3-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ardb: v5.10 backport, which doesn't have call_on_irq_stack() yet *]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2198d07c509f1db4a1185d1f65aaada794c6ea59 upstream.
All occurrences of the scs_load macro load the value of the shadow call
stack pointer from the task which is current at that point. So instead
of taking a task struct register argument in the scs_load macro to
specify the task struct to load from, let's always reference the current
task directly. This should make it much harder to exploit any
instruction sequences reloading the shadow call stack pointer register
from memory.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230109174800.3286265-2-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 430635a0ef1ce958b7b4311f172694ece2c692b8 upstream.
After a standalone CBR (not associated with TSC), update the cycles
reference timestamp and reset the cycle count, so that CYC timestamps
are calculated relative to that point with the new frequency.
Fixes: cc33618619cefc6d ("perf tools: Add Intel PT support for decoding CYC packets")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230403154831.8651-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3d32aaa7e66d5c1479a3c31d6c2c5d45dd0d3b89 upstream.
syzkaller found the following problematic rwsem locking (with write
lock already held):
down_read+0x9d/0x450 kernel/locking/rwsem.c:1509
dm_get_inactive_table+0x2b/0xc0 drivers/md/dm-ioctl.c:773
__dev_status+0x4fd/0x7c0 drivers/md/dm-ioctl.c:844
table_clear+0x197/0x280 drivers/md/dm-ioctl.c:1537
In table_clear, it first acquires a write lock
https://elixir.bootlin.com/linux/v6.2/source/drivers/md/dm-ioctl.c#L1520
down_write(&_hash_lock);
Then before the lock is released at L1539, there is a path shown above:
table_clear -> __dev_status -> dm_get_inactive_table -> down_read
https://elixir.bootlin.com/linux/v6.2/source/drivers/md/dm-ioctl.c#L773
down_read(&_hash_lock);
It tries to acquire the same read lock again, resulting in the deadlock
problem.
Fix this by moving table_clear()'s __dev_status() call to after its
up_write(&_hash_lock);
Cc: stable@vger.kernel.org
Reported-by: Zheng Zhang <zheng.zhang@email.ucr.edu>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3647ebcfbfca384840231fe13fae665453238a61 upstream.
I know nothing of ia64 htlbpage_to_page(), but guess that the p4d
line should be using taddr rather than addr, like everywhere else.
Link: https://lkml.kernel.org/r/732eae88-3beb-246-2c72-281de786740@google.com
Fixes: c03ab9e32a2c ("ia64: add support for folded p4d page tables")
Signed-off-by: Hugh Dickins <hughd@google.com
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d8898ee50edecacdf0141f26fd90acf43d7e9cd7 upstream.
The DASD driver does not kick the requeue list when requeuing IO requests
to the blocklayer. This might lead to hanging blockdevice when there is
no other trigger for this.
Fix by automatically kick the requeue list when requeuing DASD requests
to the blocklayer.
Fixes: e443343e509a ("s390/dasd: blk-mq conversion")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-8-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 604e6681e114d05a2e384c4d1e8ef81918037ef5 upstream.
Since the introduction of scrub interface, the only flag that we support
is BTRFS_SCRUB_READONLY. Thus there is no sanity checks, if there are
some undefined flags passed in, we just ignore them.
This is problematic if we want to introduce new scrub flags, as we have
no way to determine if such flags are supported.
Address the problem by introducing a check for the flags, and if
unsupported flags are set, return -EOPNOTSUPP to inform the user space.
This check should be backported for all supported kernels before any new
scrub flags are introduced.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7362042f3556528e9e9b1eb5ce8d7a3a6331476b upstream.
Below incompatibilities between Python2 and Python3 made lx-timerlist fail
to run under Python3.
o xrange() is replaced by range() in Python3
o bytes and str are different types in Python3
o the return value of Inferior.read_memory() is memoryview object in
Python3
akpm: cc stable so that older kernels are properly debuggable under newer
Python.
Link: https://lkml.kernel.org/r/TYCP286MB2146EE1180A4D5176CBA8AB2C6819@TYCP286MB2146.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Peng Liu <liupeng17@lenovo.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d7f74e9a917503ee78f2b603a456d7227cf38919 ]
If the data version returned from the server is larger than expected,
the local data is invalidated, but we may still want to note the remote
file size.
Since we're setting change_size, we have to also set data_changed
for the i_size to get updated.
Fixes: 3f4aa9818163 ("afs: Fix EOF corruption")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f376c479668557bcc2fd9e9fbc0f53e7819a11cd ]
It seems that this driver was developed based on preliminary documentation.
Report the correct names for all TQMxE39x variants, as they are used by
the released hardware revisions:
- Fix names for TQMxE39C1/C2 board IDs
- Distinguish TQMxE39M and TQMxE39S, which use the same board ID
The TQMxE39M/S are distinguished using the SAUC (Sanctioned Alternate
Uses Configuration) register of the GPIO controller. This also prepares
for the correct handling of the differences between the GPIO controllers
of our COMe and SMARC modules.
Fixes: 2f17dd34ffed ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/aca9a7cb42a85181bcb456c437554d2728e708ec.1676892223.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 051c69ff4f607aa114c7bbdd7c41ed881367aeee ]
Registers 0x160..0x17f are unassigned. Use 0x180 as base register and
update offets accordingly.
Also change the size of the range to include 0x19f. While 0x19f is
currently reserved for future extensions, so are several of the previous
registers up to 0x19e, and it is weird to leave out just the last one.
Fixes: 2f17dd34ffed ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/db4677ac318b1283c8956f637f409995a30a31c3.1676892223.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3da48ccb1d0f3b53b1e8c9022edbedc2a6e3f50a ]
Add the board IDs for the TQMx110EB and the TQMxE40x family. All use a
24MHz LPC clock.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Stable-dep-of: 051c69ff4f60 ("mfd: tqmx86: Specify IO port register range more precisely")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16b2ad150f74db0eb91f445061f16140b5aaa650 ]
No TQMx90UC exists at the moment, and it is undecided whether ID 10 will
be used eventually (and if it is, how that SoM will be named).
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Stable-dep-of: 051c69ff4f60 ("mfd: tqmx86: Specify IO port register range more precisely")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1be1b23696b3d4b0231c694f5e0767b4471d33a9 ]
The I2C_DETECT register is at IO port 0x1a7, which is outside the range
passed to devm_ioport_map() for io_base, and was only working because
there aren't actually any bounds checks for IO port accesses.
Extending the range does not seem like a good solution here, as it would
then conflict with the IO resource assigned to the I2C controller. As
this is just a one-off access during probe, use a simple inb() instead.
While we're at it, drop the unused define TQMX86_REG_I2C_INT_EN.
Fixes: 2f17dd34ffed ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/e8300a30f0791afb67d79db8089fb6004855f378.1676892223.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f05c7b7d9ea9477fcc388476c6f4ade8c66d2d26 ]
Smatch reports:
1. mtk_thermal_probe() warn: 'apmixed_base' from of_iomap() not released.
2. mtk_thermal_probe() warn: 'auxadc_base' from of_iomap() not released.
The original code forgets to release iomap resource when handling errors,
fix it by switch to devm_of_iomap.
Fixes: 89945047b166 ("thermal: mediatek: Add tsensor support for V2 thermal system")
Signed-off-by: Kang Chen <void0red@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230419020749.621257-1-void0red@hust.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8435befd81dd85b7b610598551fadf675849bc1 ]
Do not global enable all the cyclic channels in at_xdmac_resume(). Instead
save the global status in at_xdmac_suspend() and re-enable the cyclic
channel only if it was active before suspend.
Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230214151827.1050280-6-claudiu.beznea@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a251994a441ee0a69ba7062c8cd2d08ead3db379 ]
The dw-edma driver stops after processing a DMA request even if a request
remains in the issued queue, which is not the expected behavior. The DMA
engine API requires continuous processing.
Add a trigger to start after one processing finished if there are requests
remain.
Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver")
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Link: https://lore.kernel.org/r/20230411101758.438472-1-mie@igel.co.jp
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e024854048e733391b31fe5a398704b31b9af803 ]
The tegra_xusb_port_unregister should be called when usb2_port
and ulpi_port map fails in tegra_xusb_add_usb2_port() or in
tegra_xusb_add_ulpi_port(), fix it.
Fixes: 53d2a715c240 ("phy: Add Tegra XUSB pad controller support")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20221129111634.1547747-1-cuigaosheng1@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36dd7f530ae7d9ce9e853ffb8aa337de65c6600b ]
If shadow registers usage is not desired, disable that before performing
any write to CON0/1 registers in the .apply() callback, otherwise we may
lose clkdiv or period/width updates.
Fixes: cd4b45ac449a ("pwm: Add MediaTek MT2701 display PWM driver support")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Tested-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7a4e582587d97a586b1f7709e3bddcf35928e96 ]
The clks "main" and "mm" are prepared in .probe() (and unprepared in
.remove()). This results in the clocks being on during suspend which
results in unnecessarily increased power consumption.
Remove the clock operations from .probe() and .remove(). Add the
clk_prepare_enable() in .enable() and the clk_disable_unprepare() in
.disable().
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
[thierry.reding@gmail.com: squashed in fixup patch]
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Stable-dep-of: 36dd7f530ae7 ("pwm: mtk-disp: Disable shadow registers before setting backlight values")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b7b5736ffd5da6f8f6329ebe5f1829cbcf8afae ]
pwmchip_remove() returns always 0. Don't use the value to make it
possible to eventually change the function to return void. Also the
driver core ignores the return value of mtk_disp_pwm_remove().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Stable-dep-of: 36dd7f530ae7 ("pwm: mtk-disp: Disable shadow registers before setting backlight values")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1087c29e96a48e9080377e168d35dcb52fb068b ]
Commit 96f524105b9c ("leds: tca6507: use fwnode API instead of OF")
changed to fwnode API but did not take into account that a missing property
"linux,default-trigger" now seems to return an error and as a side effect
sets value to -1. This seems to be different from of_get_property() which
always returned NULL in any case of error.
Neglecting this side-effect leads to
[ 11.201965] Unable to handle kernel paging request at virtual address ffffffff when read
in the strcmp() of led_trigger_set_default() if there is no led-trigger
defined in the DTS.
I don't know if this was recently introduced somewhere in the fwnode lib
or if the effect was missed in initial testing. Anyways it seems to be a
bug to ignore the error return value of an optional value here in the
driver.
Fixes: 96f524105b9c ("leds: tca6507: use fwnode API instead of OF")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/cbae7617db83113de726fcc423a805ebaa1bfca6.1680433978.git.hns@goldelico.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
