IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Pull RTC updates from Alexandre Belloni:
"Mostly small fixes and two drivers gaining alarm support. Summary:
Subsystem:
- UIE emulation has been reworked to avoid calling driver callbacks
when it is known it will not work
Drivers:
- ab-eoz9: add alarm support
- pcf8523: add alarm support"
* tag 'rtc-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (27 commits)
rtc: sysfs: check features instead of ops
rtc: omap: use rtc_write to access OMAP_RTC_OSC_REG
rtc: s5m: Remove reference to parent's device pdata
rtc: ds1307: Fix wday settings for rx8130
rtc: pcf8523: report oscillator failures
rtc: pcf8523: add alarm support
rtc: pcf8523: remove useless define
rtc: rtc_update_irq_enable: rework UIE emulation
rtc: ds1307: remove flags
rtc: ds1307: replace HAS_ALARM by RTC_FEATURE_ALARM
rtc: imx-sc: remove .read_alarm
rtc: ds1511: remove unused function
rtc: fsl-ftm-alarm: add MODULE_TABLE()
rtc: rtc-spear: replace spin_lock_irqsave by spin_lock in hard IRQ
dt-bindings: rtc: qcom-pm8xxx-rtc: Add qcom pm8xxx rtc bindings
rtc: pm8xxx: Add RTC support for PMIC PMK8350
rtc: ab-eoz9: make use of RTC_FEATURE_ALARM
rtc: ab-eoz9: add alarm support
rtc: ab-eoz9: set regmap max_register
rtc: pcf85063: fallback to parent of_node
...
The RTC_OSC_REG register is 32-bit, but the useful information is found
in the 7 least significant bits (bits 7-31 are reserved). And in fact,
as you can see from the code, all read accesses are 8-bit, as well as
some writes. Let's make sure all writes are 8-bit. Moreover, in contexts
where consecutive reads / writes after the busy check must take place
within 15 us, it is better not to waste time on useless accesses.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210425145924.23353-1-dariobin@libero.it
Now that the core is aware of whether alarms are available, it is possible
to decide whether UIE emulation is required before actually trying to set
the alarm.
This greatly simplifies rtc_update_irq_enable because there is now only one
error value to track and is not relying on the return value of
__rtc_set_alarm anymore.
Tested-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210418000023.995758-3-alexandre.belloni@bootlin.com
Pull MFD updates from Lee Jones:
"Core Framework:
- Add support for Software Nodes to MFD Core
- Remove support for Device Properties from MFD Core
- Use standard APIs in MFD Core
New Drivers:
- Add support for ROHM BD9576MUF and BD9573MUF PMICs
- Add support for Netronix Embedded Controller, PWM and RTC
- Add support for Actions Semi ATC260x PMICs and OnKey
New Device Support:
- Add support for DG1 PCIe Graphics Card to Intel PMT
- Add support for ROHM BD71815 PMIC to ROHM BD71828
- Add support for Tolino Shine 2 HD to Netronix Embedded Controller
- Add support for AX10 BMC Secure Updates to Intel M10 BMC
Removed Device Support:
- Remove Arizona Extcon support from MFD
- Remove ST-E AB8500 Power Supply code from MFD
- Remove AB3100 altogether
New Functionality:
- Add support for SMBus and I2C modes to Dialog DA9063
- Switch to using Software Nodes in Intel (various)
New/converted Device Tree bindings:
- rohm bd71815-pmic, rohm bd9576-pmic, netronix ntxec, actions
atc260x, ricoh rn5t618, qcom pm8xxx
- Fix-ups:
- Fix error handling/path; intel_pmt
- Simplify code; rohm-bd718x7, ab8500-core, intel-m10-bmc
- Trivial clean-ups (reordering, spelling); rohm-generic, rn5t618,
max8997
- Use correct data-type; db8500-prcmu
- Remove superfluous code; lp87565, intel_quark_i2c_gpi, lpc_sch, twl
- Use generic APIs/defines; lm3533-core, intel_quark_i2c_gpio
- Regmap related fix-ups; intel-m10-bmc, sec-core
- Reorder resource freeing during remove; intel_quark_i2c_gpio
- Make table indexing more robust; intel_quark_i2c_gpio
- Fix reference imbalances; arizona-irq
- Staticify and (un)constify things; arizona-spi, stmpe, ene-kb3930,
intel-lpss-acpi, intel-lpss-pci, atc260x-i2c, intel_quark_i2c_gpio
Bug Fixes:
- Fix incorrect (register) values; intel-m10-bmc
- Kconfig related fixes; ABX500_CORE
- Do not clear the Auto Reload Register; stm32-timers"
* tag 'mfd-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (84 commits)
mfd: intel-m10-bmc: Add support for MAX10 BMC Secure Updates
Revert "mfd: max8997: Add of_compatible to Extcon and Charger mfd_cell"
mfd: twl: Remove unused inline function twl4030charger_usb_en()
dt-bindings: mfd: Convert pm8xxx bindings to yaml
dt-bindings: mfd: Add compatible for pmk8350 rtc
i2c: designware: Get rid of legacy platform data
mfd: intel_quark_i2c_gpio: Convert I²C to use software nodes
mfd: lpc_sch: Partially revert "Add support for Intel Quark X1000"
mfd: arizona: Fix rumtime PM imbalance on error
mfd: max8997: Replace 8998 with 8997
mfd: core: Use acpi_find_child_device() for child devices lookup
mfd: intel_quark_i2c_gpio: Don't play dirty trick with const
mfd: intel_quark_i2c_gpio: Enable MSI interrupt
mfd: intel_quark_i2c_gpio: Reuse BAR definitions for MFD cell indexing
mfd: ntxec: Support for EC in Tolino Shine 2 HD
mfd: stm32-timers: Avoid clearing auto reload register
mfd: intel_quark_i2c_gpio: Replace I²C speeds with descriptive definitions
mfd: intel_quark_i2c_gpio: Remove unused struct device member
mfd: intel_quark_i2c_gpio: Unregister resources in reversed order
mfd: Kconfig: ABX500_CORE should depend on ARCH_U8500
...
The rtc device node is always NULL.
Since v5.12-rc1-dontuse/3c9ea42802a1fbf7ef29660ff8c6e526c58114f6 this
will lead to a NULL pointer dereference.
To fix this use the parent node which is the i2c client node as set by
devm_rtc_allocate_device().
Using the i2c client node seems to be what other similar drivers do
e.g. rtc-pcf8563.c.
Signed-off-by: Francois Gervais <fgervais@distech-controls.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210310211026.27299-1-fgervais@distech-controls.com
Immutable branch between MFD, Clock, GPIO, Regulator and RTC due for the v5.13 merge window
Immutable branch between MFD and Extcon due for the v5.13 merge window
Immutable branch between MFD and Input due for the v5.13 merge window
Immutable branch between MFD and Platform/x86 due for the v5.13 merge window
Immutable branch between MFD and Power due for the v5.13 merge window
Immutable branch between MFD, PWM and RTC due for the v5.13 merge window
The ROHM BD71828 and BD71815 RTC drivers only need the regmap
pointer from parent. Regmap can be obtained via dev_get_regmap()
so do not require parent to populate driver data for that.
BD70528 on the other hand requires parent data to access the
watchdog so leave the parent data for BD70528 here for now.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The datasheet for the rv3028 says the weekday has exact 3 bits
and in chapter 3.4.0 for the "3h–Weekday" register it says:
"""
This register holds the current day of the week. Each value represents
one weekday that is assigned by the user. Values will range from 0 to 6
The weekday counter is simply a 3-bit counter which counts up to 6
and then resets to 0.
"""
So do not code weekday bitwise instead, use the raw values from
0-6.
Tested on "PHYTEC phyBOARD-Pollux i.MX8MP" board.
Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210309134719.1494062-1-hs@denx.de
The added device_property_present() call causes a build
failure in some configurations because of the missing header:
drivers/rtc/rtc-tps65910.c:422:7: error: implicit declaration of function 'device_property_present' [-Werror,-Wimplicit-function-declaration]
Fixes: 454ba154a6 ("rtc: tps65910: Support wakeup-source property")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210225134215.2263694-1-arnd@kernel.org
No functional change has been made with this patch. The main intent here
is to reduce code repetition of getting sensitivity attribute.
In the current implementation, sensor_hub_input_get_attribute_info() is
called from multiple drivers to get attribute info for sensitivity
field. Moving this to common place will avoid code repetition.
Signed-off-by: Ye Xiang <xiang.ye@intel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210201054921.18214-2-xiang.ye@intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
With this driver, mainline Linux can keep its time and date in sync with
the vendor kernel.
Advanced functionality like alarm and automatic power-on is not yet
supported.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Pull misc vfs updates from Al Viro:
"Assorted stuff pile - no common topic here"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
whack-a-mole: don't open-code iminor/imajor
9p: fix misuse of sscanf() in v9fs_stat2inode()
audit_alloc_mark(): don't open-code ERR_CAST()
fs/inode.c: make inode_init_always() initialize i_ino to 0
vfs: don't unnecessarily clone write access for writable fds
Pull ARM updates from Russell King:
- Generalise byte swapping assembly
- Update debug addresses for STI
- Validate start of physical memory with DTB
- Do not clear SCTLR.nTLSMD in decompressor
- amba/locomo/sa1111 devices remove method return type is void
- address markers for KASAN in page table dump
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9065/1: OABI compat: fix build when EPOLL is not enabled
ARM: 9055/1: mailbox: arm_mhuv2: make remove callback return void
amba: Make use of bus_type functions
amba: Make the remove callback return void
vfio: platform: simplify device removal
amba: reorder functions
amba: Fix resource leak for drivers without .remove
ARM: 9054/1: arch/arm/mm/mmu.c: Remove duplicate header
ARM: 9053/1: arm/mm/ptdump:Add address markers for KASAN regions
ARM: 9051/1: vdso: remove unneded extra-y addition
ARM: 9050/1: Kconfig: Select ARCH_HAVE_NMI_SAFE_CMPXCHG where possible
ARM: 9049/1: locomo: make locomo bus's remove callback return void
ARM: 9048/1: sa1111: make sa1111 bus's remove callback return void
ARM: 9047/1: smp: remove unused variable
ARM: 9046/1: decompressor: Do not clear SCTLR.nTLSMD for ARMv7+ cores
ARM: 9045/1: uncompress: Validate start of physical memory against passed DTB
ARM: 9042/1: debug: no uncompress debugging while semihosting
ARM: 9041/1: sti LL_UART: add STiH418 SBC UART0 support
ARM: 9040/1: use DEBUG_UART_PHYS and DEBUG_UART_VIRT for sti LL_UART
ARM: 9039/1: assembler: generalize byte swapping macro into rev_l
Pull x86 platform driver updates from Hans de Goede:
"Highlights:
- Microsoft Surface devices System Aggregator Module support
- SW_TABLET_MODE reporting improvements
- thinkpad_acpi keyboard language setting support
- platform / DPTF profile settings support:
- Base / userspace API parts merged from Rafael's acpi-platform
branch
- thinkpad_acpi and ideapad-laptop support through pdx86
- Remove support for some obsolete Intel MID platforms through
merging of the shared intel-mid-removal branch
- Big cleanup of the ideapad-laptop driver
- Misc other fixes / new hw support / quirks"
* tag 'platform-drivers-x86-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (99 commits)
platform/x86: intel_scu_ipc: Increase virtual timeout from 3 to 5 seconds
platform/surface: aggregator: Fix access of unaligned value
tools/power/x86/intel-speed-select: Update version to 1.8
tools/power/x86/intel-speed-select: Add new command to get/set TRL
tools/power/x86/intel-speed-select: Add new command turbo-mode
Platform: OLPC: Constify static struct regulator_ops
platform/surface: Add Surface Hot-Plug driver
platform/x86: intel_scu_wdt: Drop mistakenly added const
platform/x86: Kconfig: add missing selects for ideapad-laptop
platform/x86: acer-wmi: Don't use ACPI_EXCEPTION()
platform/x86: thinkpad_acpi: Replace ifdef CONFIG_ACPI_PLATFORM_PROFILE with depends on
platform/x86: thinkpad_acpi: Fix 'warning: no previous prototype for' warnings
platform/x86: msi-wmi: Fix variable 'status' set but not used compiler warning
platform/surface: surface3-wmi: Fix variable 'status' set but not used compiler warning
platform/x86: Move all dell drivers to their own subdirectory
Documentation/ABI: sysfs-platform-ideapad-laptop: conservation_mode attribute
Documentation/ABI: sysfs-platform-ideapad-laptop: update device attribute paths
platform/x86: ideapad-laptop: add "always on USB charging" control support
platform/x86: ideapad-laptop: add keyboard backlight control support
platform/x86: ideapad-laptop: send notification about touchpad state change to sysfs
...
