iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
1,017,260 Commits 104 Branches 1,843 Tags
410e302ea53f095f5d94dc14efefe8191bde901b
Commit Graph

3873 Commits

Author SHA1 Message Date
Claudius Heine
7e6066ca1f rtc: Kconfig: Fix typo in help message of rx 6110 
The help message in the Kconfig for the RX-6110 erronously stated
RX-6610.

Signed-off-by: Claudius Heine <ch@denx.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201117121817.953924-2-ch@denx.de
 2020-11-17 20:30:30 +01:00
Andy Shevchenko
698fffc270 rtc: ds1307: Drop of_match_ptr and CONFIG_OF protections 
These prevent use of this driver with ACPI via PRP0001.
Drop them to remove this restriction.

Also added mod_devicetable.h include given use of struct of_device_id.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201116142859.31257-3-andriy.shevchenko@linux.intel.com
 2020-11-17 20:25:42 +01:00
Andy Shevchenko
227ec129ad rtc: ds1307: Make use of device properties 
Device property API allows to gather device resources from different sources,
such as ACPI. Convert the drivers to unleash the power of device property API.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201116142859.31257-2-andriy.shevchenko@linux.intel.com
 2020-11-17 20:25:34 +01:00
Andy Shevchenko
a31111189b rtc: ds1307: Remove non-valid ACPI IDs 
The commit 9c19b8930d ("rtc: ds1307: Add ACPI support") added invalid
ACPI IDs (all of them are abusing ACPI specification). Moreover there is
not even a single evidence that vendor registered any of such devices.

Remove broken ACPI IDs from the driver. For prototyping one may use PRP0001
with device properties adhering to a DT binding. The following patches
will add support of that to the driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tin Huynh <tnhuynh@apm.com>
Link: https://uefi.org/PNP_ACPI_Registry
Link: https://lore.kernel.org/r/20201116142859.31257-1-andriy.shevchenko@linux.intel.com
 2020-11-17 20:23:16 +01:00
Alexandre Belloni
bfca1c924d rtc: at91rm9200: Add sam9x60 compatible 
Handle the sam9x60 RTC. While it can work with the at91sam9x5 fallback, it
has crystal correction support and doesn't need to shadow IMR.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20201117133920.1229679-1-alexandre.belloni@bootlin.com
 2020-11-17 19:35:09 +01:00
Alexandre Belloni
f6a46f8b30 rtc: at91rm9200: add correction support 
The sama5d4 and sama5d2 RTCs are able to correct for imprecise crystals, up
to 1953 ppm.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20201108232001.1580128-1-alexandre.belloni@bootlin.com
 2020-11-17 19:32:12 +01:00
Alexandre Belloni
767fbb7102 rtc: rv3032: fix nvram nvmem priv pointer 
The nvmem priv pointer is set to rv3032 but the rv3032_nvram_write and
rv3032_nvram_read expect the regmap pointer.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201108223710.1574331-1-alexandre.belloni@bootlin.com
 2020-11-15 00:51:34 +01:00
Jiaxun Yang
5022cfc112 rtc: goldfish: Remove GOLDFISH dependency 
Goldfish platform is covered with dust.
However the goldfish-rtc had been used as virtualized RTC
in QEMU for RISC-V virt hw and MIPS loongson3-virt hw, thus
we can drop other parts of goldfish but leave goldfish-rtc here.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201114130921.651882-2-jiaxun.yang@flygoat.com
 2020-11-15 00:36:26 +01:00
Xu Wang
081e2500df rtc: snvs: Remove NULL pointer check before clk_* 
Because clk_* already checked NULL clock parameter,
so the additional checks are unnecessary, just remove them.

Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201113080305.65961-1-vulab@iscas.ac.cn
 2020-11-14 23:54:44 +01:00
Xu Wang
910d002d84 rtc: brcmstb-waketimer: Remove redundant null check before clk_disable_unprepare 
Because clk_disable_unprepare() already checked NULL clock parameter,
so the additional check is unnecessary, just remove it.

Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20201113074538.65028-1-vulab@iscas.ac.cn
 2020-11-14 23:52:09 +01:00
Zheng Liang
1eab0fea25 rtc: pl031: fix resource leak in pl031_probe 
When devm_rtc_allocate_device is failed in pl031_probe, it should release
mem regions with device.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Liang <zhengliang6@huawei.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201112093139.32566-1-zhengliang6@huawei.com
 2020-11-14 23:42:29 +01:00
Tian Tao
bc06cfc1c4 rtc: cpcap: Fix missing IRQF_ONESHOT as only threaded handler 
Coccinelle noticed:
drivers/rtc/rtc-cpcap.c:271:7-32: ERROR: Threaded IRQ with no
primary handler requested without IRQF_ONESHOT
drivers/rtc/rtc-cpcap.c:287:7-32: ERROR: Threaded IRQ with no
primary handler requested without IRQF_ONESHOT

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/1605000947-32882-1-git-send-email-tiantao6@hisilicon.com
 2020-11-14 23:39:02 +01:00
Guillaume Tucker
c56ac7a0f4 rtc: hym8563: enable wakeup when applicable 
Enable wakeup in the hym8563 driver if the IRQ was successfully
requested or if wakeup-source is set in the devicetree.

As per the description of device_init_wakeup(), it should be enabled
for "devices that everyone expects to be wakeup sources".  One would
expect this to be the case with a real-time clock.

Tested on rk3288-rock2-square, which has an IRQ configured for the
RTC.  As a result, wakeup was enabled during driver initialisation.

Fixes: dcaf038493 ("rtc: add hym8563 rtc-driver")
Reported-by: kernelci.org bot <bot@kernelci.org>
Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/1ea023e2ba50a4dab6e39be93d7de3146af71a60.1604653374.git.guillaume.tucker@collabora.com
 2020-11-14 23:36:10 +01:00
Kaixu Xia
a48c6224ae rtc: da9063: Simplify bool comparison 
Fix the following coccicheck warning:

./drivers/rtc/rtc-da9063.c:246:5-18: WARNING: Comparison to bool

Reported-by: Tosk Robot <tencent_os_robot@tencent.com>
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/1604649637-1014-1-git-send-email-kaixuxia@tencent.com
 2020-11-14 23:31:33 +01:00
Kaixu Xia
825156a5ee rtc: sc27xx: Remove unnecessary conversion to bool 
Here we could use the '!=' expression to fix the following coccicheck
warning:

./drivers/rtc/rtc-sc27xx.c:566:50-55: WARNING: conversion to bool not needed here

Reported-by: Tosk Robot <tencent_os_robot@tencent.com>
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/1604647854-876-1-git-send-email-kaixuxia@tencent.com
 2020-11-14 23:30:10 +01:00
Dinghao Liu
28d211919e rtc: sun6i: Fix memleak in sun6i_rtc_clk_init 
When clk_hw_register_fixed_rate_with_accuracy() fails,
clk_data should be freed. It's the same for the subsequent
two error paths, but we should also unregister the already
registered clocks in them.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201020061226.6572-1-dinghao.liu@zju.edu.cn
 2020-10-28 18:51:56 +01:00
Dan Carpenter
ba1c30bf3f rtc: pcf2127: fix pcf2127_nvmem_read/write() returns 
These functions should return zero on success.  Non-zero returns are
treated as error.  On some paths, this doesn't matter but in
nvmem_cell_read() a non-zero return would be passed to ERR_PTR() and
lead to an Oops.

Fixes: d6c3029f32 ("rtc: pcf2127: add support for accessing internal static RAM")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201022070451.GA2817669@mwanda
 2020-10-27 12:23:23 +01:00
Uwe Kleine-König
5d78533a0c rtc: pcf2127: move watchdog initialisation to a separate function 
The obvious advantages are:

 - The linker can drop the watchdog functions if CONFIG_WATCHDOG is off.
 - All watchdog stuff grouped together with only a single function call
   left in generic code.
 - Watchdog register is only read when it is actually used.
 - Less #ifdefery

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200924105256.18162-2-u.kleine-koenig@pengutronix.de
 2020-10-27 12:18:28 +01:00
Linus Torvalds
b7769c45b8 Merge tag 'rtc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux 
Pull RTC updates from Alexandre Belloni:
 "A new driver this cycle is making the bulk of the changes and the
  rx8010 driver has been rework to use the modern APIs.

  Summary:

  Subsystem:
   - new generic DT properties: aux-voltage-chargeable,
     trickle-voltage-millivolt

  New driver:
   - Microcrystal RV-3032

  Drivers:
   - ds1307: use aux-voltage-chargeable
   - r9701, rx8010: modernization of the driver
   - rv3028: fix clock output, trickle resistor values, RAM
     configuration registers"

* tag 'rtc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
  rtc: r9701: set range
  rtc: r9701: convert to devm_rtc_allocate_device
  rtc: r9701: stop setting RWKCNT
  rtc: r9701: remove useless memset
  rtc: r9701: stop setting a default time
  rtc: r9701: remove leftover comment
  rtc: rv3032: Add a driver for Microcrystal RV-3032
  dt-bindings: rtc: rv3032: add RV-3032 bindings
  dt-bindings: rtc: add trickle-voltage-millivolt
  rtc: rv3028: ensure ram configuration registers are saved
  rtc: rv3028: factorize EERD bit handling
  rtc: rv3028: fix trickle resistor values
  rtc: rv3028: fix clock output support
  rtc: mt6397: Remove unused member dev
  rtc: rv8803: simplify the return expression of rv8803_nvram_write
  rtc: meson: simplify the return expression of meson_vrtc_probe
  rtc: rx8010: rename rx8010_init_client() to rx8010_init()
  rtc: ds1307: enable rx8130's backup battery, make it chargeable optionally
  rtc: ds1307: consider aux-voltage-chargeable
  rtc: ds1307: store previous charge default per chip
  ...
 2020-10-21 11:22:08 -07:00
Alexandre Belloni
35331b506f rtc: r9701: set range 
Set range and remove the set_time check. This is a classic BCD RTC.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201015191135.471249-6-alexandre.belloni@bootlin.com
 2020-10-19 22:48:55 +02:00
Alexandre Belloni
dfe13cf2ae rtc: r9701: convert to devm_rtc_allocate_device 
This allows further improvement of the driver.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201015191135.471249-5-alexandre.belloni@bootlin.com
 2020-10-19 22:48:55 +02:00
Alexandre Belloni
8b34134907 rtc: r9701: stop setting RWKCNT 
tm_wday is never checked for validity and it is not read back in
r9701_get_datetime. Avoid setting it to stop tripping static checkers:

        drivers/rtc/rtc-r9701.c:109 r9701_set_datetime()
        error: undefined (user controlled) shift '1 << dt->tm_wday'

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201015191135.471249-4-alexandre.belloni@bootlin.com
 2020-10-19 22:48:55 +02:00
Alexandre Belloni
2a8f3380c9 rtc: r9701: remove useless memset 
The RTC core already sets to zero the struct rtc_tie it passes to the
driver, avoid doing it a second time.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201015191135.471249-3-alexandre.belloni@bootlin.com
 2020-10-19 22:48:55 +02:00
Alexandre Belloni
7390bec4ed rtc: r9701: stop setting a default time 
It doesn't make sense to set the RTC to a default value at probe time. Let
the core handle invalid date and time.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201015191135.471249-2-alexandre.belloni@bootlin.com
 2020-10-19 22:48:55 +02:00
Alexandre Belloni
92c6dcfbd1 rtc: r9701: remove leftover comment 
Commit 22652ba724 ("rtc: stop validating rtc_time in .read_time") removed
the code but not the associated comment.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201015191135.471249-1-alexandre.belloni@bootlin.com
 2020-10-19 22:48:55 +02:00
Alexandre Belloni
2eeaa532ac rtc: rv3032: Add a driver for Microcrystal RV-3032 
New driver for the Microcrystal RV-3032, including support for:
 - Date/time
 - Alarms
 - Low voltage detection
 - Trickle charge
 - Trimming
 - Clkout
 - RAM
 - EEPROM
 - Temperature sensor

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201013144110.1942218-3-alexandre.belloni@bootlin.com
 2020-10-19 22:47:56 +02:00
Alexandre Belloni
024e6f3dce rtc: rv3028: ensure ram configuration registers are saved 
If RV3028_CTRL1_EERD is not set (this is the default), the RTC will refresh
the RAM configuration registers from the EEPROM at midnight. It is
necessary to save the RAM registers back to EEPROM after modifying them.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201009153101.721149-4-alexandre.belloni@bootlin.com
 2020-10-15 12:09:35 +02:00
Alexandre Belloni
de0ad60e79 rtc: rv3028: factorize EERD bit handling 
Both rv3028_eeprom_write and rv3028_eeprom_read enable EERD before sending
commands to the EEPROM and restore it afterwards. Factorize this code.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201009153101.721149-3-alexandre.belloni@bootlin.com
 2020-10-15 12:09:35 +02:00
Alexandre Belloni
c1efae1432 rtc: rv3028: fix trickle resistor values 
Version 1.0 of the application manual had the wrong resistor values. Fix
them according to version 1.1

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201009153101.721149-2-alexandre.belloni@bootlin.com
 2020-10-15 12:09:35 +02:00
Alexandre Belloni
00e8e87f10 rtc: rv3028: fix clock output support 
rv3028_clkout_set_rate unconditionally sets RV3028_CLKOUT_CLKOE but
clk_set_rate may be called with the clock disabled. Ensure the clock is
kept disabled if it was not yet enabled.

Also, the actual rate was overwritten when enabling the clock, properly
write to the register only once.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201009153101.721149-1-alexandre.belloni@bootlin.com
 2020-10-15 12:09:34 +02:00
Fei Shao
770c03e6da rtc: mt6397: Remove unused member dev 
Removing the struct member "dev" in mt6397 RTC driver because it's not
initialized and the only usage is for one debugging message.

Also fixed a typo in the error message.

Signed-off-by: Fei Shao <fshao@chromium.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201008093414.1911699-1-fshao@chromium.org
 2020-10-15 12:01:29 +02:00
Liu Shixin
179b4bcc4c rtc: rv8803: simplify the return expression of rv8803_nvram_write 
Simplify the return expression.

Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200921082449.2591981-1-liushixin2@huawei.com
 2020-09-29 22:20:10 +02:00
Liu Shixin
9ce42e8e03 rtc: meson: simplify the return expression of meson_vrtc_probe 
Simplify the return expression.

Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200919100856.1639319-1-liushixin2@huawei.com
 2020-09-29 22:19:15 +02:00
Bartosz Golaszewski
ba1bcafb29 rtc: rx8010: rename rx8010_init_client() to rx8010_init() 
Since the switch to using regmap this function no longer takes the
I2C client struct as argument nor do we even interact with the client
anywhere other than when creating the regmap.

Rename it to a less misleading name: "rx8010_init()".

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200917114656.9036-1-brgl@bgdev.pl
 2020-09-29 22:18:10 +02:00
Bastian Krause
0026f1604c rtc: ds1307: enable rx8130's backup battery, make it chargeable optionally 
The ds1307 charger infrastructure now allows to add a rx8130 charger
setup that..

- does not depend on trickle-resistor-ohms
- does not use DS13XX_TRICKLE_CHARGER_MAGIC trickle-charge select (TCS)
  bits
- keeps previous no-charge behavior for device trees without
  aux-voltage-chargeable

Make that happen.

Signed-off-by: Bastian Krause <bst@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200917183246.19446-9-bst@pengutronix.de
 2020-09-24 09:56:04 +02:00
Bastian Krause
0874734e09 rtc: ds1307: consider aux-voltage-chargeable 
Prefer aux-voltage-chargeable over trickle-diode-disable and set diode
accordingly. This is then passed to the chip's appropriate charge setup
function.

Signed-off-by: Bastian Krause <bst@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200917183246.19446-8-bst@pengutronix.de
 2020-09-24 09:56:04 +02:00
Bastian Krause
95a74cbb21 rtc: ds1307: store previous charge default per chip 
Some RTC's batteries and supercaps were charged by default until now.
In contrast other RTCs allow charging but the driver did not configure
them to do so until now. These must not be charged by default to stay
backwards compatible.

In order to do that, store the charge default per chip.

Signed-off-by: Bastian Krause <bst@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200917183246.19446-7-bst@pengutronix.de
 2020-09-24 09:56:04 +02:00
Bastian Krause
1b5b6af788 rtc: ds1307: introduce requires_trickle_resistor per chip 
Make trickle-resistor-ohms optional for charging setups that do not
require specifying ROUT bits (specifying the resistor value between Vcc
and Vbackup). In order to allow specifying that, introduce
requires_trickle_resistor per chip.

Signed-off-by: Bastian Krause <bst@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200917183246.19446-6-bst@pengutronix.de
 2020-09-24 09:56:04 +02:00
Bastian Krause
462eb736db rtc: ds1307: apply DS13XX_TRICKLE_CHARGER_MAGIC only conditionally 
DS13XX_TRICKLE_CHARGER_MAGIC sets the trickle-charge select (TCS) bits
(7..4). The datasheet of Maxim Integrated's DS1339 [1] for instance
reads:

"To prevent accidental enabling, only a pattern on 1010 enables the
trickle charger. All other patterns disable the trickle charger."

Since not all RTCs connected to a backup battery or supercap use these
bits DS13XX_TRICKLE_CHARGER_MAGIC should not get applied for all charger
setups unconditionally.
Epson's RX8130 is such an example: Instead of TCS bits "SMPTSEL1",
"SMPTSEL0",  "CHGEN" and "INIEN" are expected as bit 7..4.

DS1339 and DS1340 are currently the only RTCs in the ds1307 driver that
apply DS13XX_TRICKLE_CHARGER_MAGIC to their setup register value. So
apply DS13XX_TRICKLE_CHARGER_MAGIC in do_trickle_setup_ds1339() which
is used by both RTCs.

[1] https://datasheets.maximintegrated.com/en/ds/DS1339-DS1339U.pdf
[2] https://support.epson.biz/td/api/doc_check.php?dl=app_RX8130CE

Signed-off-by: Bastian Krause <bst@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200917183246.19446-5-bst@pengutronix.de
 2020-09-24 09:56:03 +02:00
Biwen Li
35425bafc7 rtc: pcf2127: fix a bug when not specify interrupts property 
Fix a bug when not specify interrupts property in dts
as follows,
    rtc-pcf2127-i2c 1-0051: failed to request alarm irq
    rtc-pcf2127-i2c: probe of 1-0051 failed with error -22

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200915073213.12779-1-biwen.li@oss.nxp.com
 2020-09-15 12:25:44 +02:00
Thomas Bogendoerfer
9f8010e71f rtc: ds1685: Fix bank switching to avoid endless loop 
ds1685_rtc_begin_data_access() tried to access an extended register before
enabling access to it by switching to bank 1. Depending on content in NVRAM
this could lead to an endless loop. While at it fix also switch back to
bank 0 in ds1685_rtc_end_data_access().

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Joshua Kinard <kumba@gentoo.org>
Link: https://lore.kernel.org/r/20200910084124.138560-1-tsbogend@alpha.franken.de
 2020-09-15 11:24:29 +02:00
Rikard Falkeborn
d0a3b65052 rtc: st-lpc: Constify st_rtc_ops 
The only usage of st_rtc_ops is to assign its address to the ops field
in the rtc_device struct. which is a const pointer. Make it const to
allow the compiler to put it in read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200913122644.35515-1-rikard.falkeborn@gmail.com
 2020-09-15 11:21:50 +02:00
Bartosz Golaszewski
2fc1af3095 rtc: rx8010: use range checking provided by core RTC code 
We don't need to check the time range manually in set_time(), we can
use range_min and range_max exposed by struct rtc_device.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200914154601.32245-15-brgl@bgdev.pl
 2020-09-15 10:50:38 +02:00
Bartosz Golaszewski
9868bc1ce2 rtc: rx8010: convert to using regmap 
This driver requires SMBUS to work. We can relax this requirement if we
switch to using i2c regmap and let the regmap sub-system figure out how
to talk to the bus.

This also has the advantage of shrinking the code for register updates.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200914154601.32245-14-brgl@bgdev.pl
 2020-09-15 10:50:38 +02:00
Bartosz Golaszewski
cee015d90d rtc: rx8010: switch to using the preferred i2c API 
We should generally use probe_new instead of probe when registering i2c
drivers. Convert rx8010 to using it.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200914154601.32245-13-brgl@bgdev.pl
 2020-09-15 10:50:38 +02:00
Bartosz Golaszewski
0ce627785a rtc: rx8010: switch to using the preferred RTC API 
Use devm_rtc_allocate_device() + rtc_register_device() instead of the
deprecated devm_rtc_device_register().

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200914154601.32245-12-brgl@bgdev.pl
 2020-09-15 10:50:38 +02:00
Bartosz Golaszewski
666f21413b rtc: rx8010: prefer sizeof(*val) over sizeof(struct type_of_val) 
Using the size of the variable is preferred over using the size of its
type when allocating memory. Convert the call to devm_kzalloc() in
probe().

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200914154601.32245-11-brgl@bgdev.pl
 2020-09-15 10:50:37 +02:00
Bartosz Golaszewski
955a123c14 rtc: rx8010: use a helper variable for client->dev in probe() 
Simple 'dev' looks better then repeated &client->dev and has the added
benefit of avoiding unnecessary line breaks.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200914154601.32245-10-brgl@bgdev.pl
 2020-09-15 10:50:37 +02:00
Bartosz Golaszewski
b3ff7fd68d rtc: rx8010: drop unnecessary initialization 
The 'err' local variable in rx8010_init_client() doesn't need to be
initialized.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200914154601.32245-9-brgl@bgdev.pl
 2020-09-15 10:50:37 +02:00
Bartosz Golaszewski
f702699c67 rtc: rx8010: don't use magic values for time buffer length 
The time buffer len is used directly in this driver. For readability
it's better to define it as the difference between the date register
offsets and use sizeof() whenever referencing it.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200914154601.32245-8-brgl@bgdev.pl
 2020-09-15 10:50:37 +02:00