IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 7cf78b6b12fd5550545e4b73b35dca18bd46b44c ]
When the option is RTC_PLL_GET, pll will be copied to userland
via copy_to_user. pll is initialized using mach_get_rtc_pll indirect
call and mach_get_rtc_pll is only assigned with function
q40_get_rtc_pll in arch/m68k/q40/config.c.
In function q40_get_rtc_pll, the field pll_ctrl is not initialized.
This will leak uninitialized stack content to userland.
Fix this by zeroing the uninitialized field.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Link: https://lore.kernel.org/r/20190927121544.7650-1-huangfq.daxian@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c86fbe484c10b2cd1e770770db2d6b2c88801c1d ]
The driver fails to handle data when read or written beyond device reported
LBA, which triggers kernel panic
Link: https://lore.kernel.org/r/1571120524-6037-2-git-send-email-balsundar.p@microsemi.com
Signed-off-by: Balsundar P <balsundar.p@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83d116c53058d505ddef051e90ab27f57015b025 ]
When we tested pmdk unit test [1] vmmalloc_fork TEST3 on arm64 guest, there
will be a double page fault in __copy_from_user_inatomic of cow_user_page.
To reproduce the bug, the cmd is as follows after you deployed everything:
make -C src/test/vmmalloc_fork/ TEST_TIME=60m check
Below call trace is from arm64 do_page_fault for debugging purpose:
[ 110.016195] Call trace:
[ 110.016826] do_page_fault+0x5a4/0x690
[ 110.017812] do_mem_abort+0x50/0xb0
[ 110.018726] el1_da+0x20/0xc4
[ 110.019492] __arch_copy_from_user+0x180/0x280
[ 110.020646] do_wp_page+0xb0/0x860
[ 110.021517] __handle_mm_fault+0x994/0x1338
[ 110.022606] handle_mm_fault+0xe8/0x180
[ 110.023584] do_page_fault+0x240/0x690
[ 110.024535] do_mem_abort+0x50/0xb0
[ 110.025423] el0_da+0x20/0x24
The pte info before __copy_from_user_inatomic is (PTE_AF is cleared):
[ffff9b007000] pgd=000000023d4f8003, pud=000000023da9b003,
pmd=000000023d4b3003, pte=360000298607bd3
As told by Catalin: "On arm64 without hardware Access Flag, copying from
user will fail because the pte is old and cannot be marked young. So we
always end up with zeroed page after fork() + CoW for pfn mappings. we
don't always have a hardware-managed access flag on arm64."
This patch fixes it by calling pte_mkyoung. Also, the parameter is
changed because vmf should be passed to cow_user_page()
Add a WARN_ON_ONCE when __copy_from_user_inatomic() returns error
in case there can be some obscure use-case (by Kirill).
[1] https://github.com/pmem/pmdk/tree/master/src/test/vmmalloc_fork
Signed-off-by: Jia He <justin.he@arm.com>
Reported-by: Yibo Cai <Yibo.Cai@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 486a8849843455298d49e694cca9968336ce2327 ]
The memory of ar->debug.tpc_stats_final is reallocated every debugfs
reading, it should be freed in ath10k_debug_destroy() for the last
allocation.
Tested HW: QCA9984
Tested FW: 10.4-3.9.0.2-00035
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5329b2d5b8b4e41be14d31ee8505b4f5607bf9b ]
If firmware reports rate_max > WMI_TPC_RATE_MAX(WMI_TPC_FINAL_RATE_MAX)
or num_tx_chain > WMI_TPC_TX_N_CHAIN, it will cause array out-of-bounds
access, so print a warning and reset to avoid memory corruption.
Tested HW: QCA9984
Tested FW: 10.4-3.9.0.2-00035
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c98f021e4e717ffd9948fa65340ea3ef12b7935 ]
Make dma_fence_enable_sw_signaling() behave like its
dma_fence_add_callback() and dma_fence_default_wait() counterparts and
perform the test to enable signaling under the fence->lock, along with
the action to do so. This ensure that should an implementation be trying
to flush the cb_list (by signaling) on retirement before freeing the
fence, it can do so in a race-free manner.
See also 0fc89b6802ba ("dma-fence: Simply wrap dma_fence_signal_locked
with dma_fence_signal").
v2: Refactor all 3 enable_signaling paths to use a common function.
v3: Don't argue, just keep the tracepoint in the existing spot.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004101140.32713-1-chris@chris-wilson.co.uk
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e3e24b42043eceb97ed834102c2d094dfd7aaa6 ]
Currently, the SELinux LSM prevents one from setting the
`security.selinux` xattr on an inode without a policy first being
loaded. However, this restriction is problematic: it makes it impossible
to have newly created files with the correct label before actually
loading the policy.
This is relevant in distributions like Fedora, where the policy is
loaded by systemd shortly after pivoting out of the initrd. In such
instances, all files created prior to pivoting will be unlabeled. One
then has to relabel them after pivoting, an operation which inherently
races with other processes trying to access those same files.
Going further, there are use cases for creating the entire root
filesystem on first boot from the initrd (e.g. Container Linux supports
this today[1], and we'd like to support it in Fedora CoreOS as well[2]).
One can imagine doing this in two ways: at the block device level (e.g.
laying down a disk image), or at the filesystem level. In the former,
labeling can simply be part of the image. But even in the latter
scenario, one still really wants to be able to set the right labels when
populating the new filesystem.
This patch enables this by changing behaviour in the following two ways:
1. allow `setxattr` if we're not initialized
2. don't try to set the in-core inode SID if we're not initialized;
instead leave it as `LABEL_INVALID` so that revalidation may be
attempted at a later time
Note the first hunk of this patch is mostly the same as a previously
discussed one[3], though it was part of a larger series which wasn't
accepted.
[1] https://coreos.com/os/docs/latest/root-filesystem-placement.html
[2] https://github.com/coreos/fedora-coreos-tracker/issues/94
[3] https://www.spinics.net/lists/linux-initramfs/msg04593.html
Co-developed-by: Victor Kamensky <kamensky@cisco.com>
Signed-off-by: Victor Kamensky <kamensky@cisco.com>
Signed-off-by: Jonathan Lebon <jlebon@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e0a851fe6b9b619527bd928aa93caaddd003f70c upstream.
If the call to uart_add_one_port() in serial8250_register_8250_port()
fails, a half-initialized entry in the serial_8250ports[] array is left
behind.
A subsequent reprobe of the same serial port causes that entry to be
reused. Because uart->port.dev is set, uart_remove_one_port() is called
for the half-initialized entry and bails out with an error message:
bcm2835-aux-uart 3f215040.serial: Removing wrong port: (null) != (ptrval)
The same happens on failure of mctrl_gpio_init() since commit
4a96895f74c9 ("tty/serial/8250: use mctrl_gpio helpers").
Fix by zeroing the uart->port.dev pointer in the probe error path.
The bug was introduced in v2.6.10 by historical commit befff6f5bf5f
("[SERIAL] Add new port registration/unregistration functions."):
https://git.kernel.org/tglx/history/c/befff6f5bf5f
The commit added an unconditional call to uart_remove_one_port() in
serial8250_register_port(). In v3.7, commit 835d844d1a28 ("8250_pnp:
do pnp probe before legacy probe") made that call conditional on
uart->port.dev which allows me to fix the issue by zeroing that pointer
in the error path. Thus, the present commit will fix the problem as far
back as v3.7 whereas still older versions need to also cherry-pick
835d844d1a28.
Fixes: 835d844d1a28 ("8250_pnp: do pnp probe before legacy probe")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v2.6.10
Cc: stable@vger.kernel.org # v2.6.10: 835d844d1a28: 8250_pnp: do pnp probe before legacy
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/b4a072013ee1a1d13ee06b4325afb19bda57ca1b.1589285873.git.lukas@wunner.de
[iwamatsu: Backported to 4.14, 4.19: adjust context]
Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 78dc70ebaa38aa303274e333be6c98eef87619e2 upstream.
Aggregation effects are extremely common with wifi, cellular, and cable
modem link technologies, ACK decimation in middleboxes, and LRO and GRO
in receiving hosts. The aggregation can happen in either direction,
data or ACKs, but in either case the aggregation effect is visible
to the sender in the ACK stream.
Previously BBR's sending was often limited by cwnd under severe ACK
aggregation/decimation because BBR sized the cwnd at 2*BDP. If packets
were acked in bursts after long delays (e.g. one ACK acking 5*BDP after
5*RTT), BBR's sending was halted after sending 2*BDP over 2*RTT, leaving
the bottleneck idle for potentially long periods. Note that loss-based
congestion control does not have this issue because when facing
aggregation it continues increasing cwnd after bursts of ACKs, growing
cwnd until the buffer is full.
To achieve good throughput in the presence of aggregation effects, this
algorithm allows the BBR sender to put extra data in flight to keep the
bottleneck utilized during silences in the ACK stream that it has evidence
to suggest were caused by aggregation.
A summary of the algorithm: when a burst of packets are acked by a
stretched ACK or a burst of ACKs or both, BBR first estimates the expected
amount of data that should have been acked, based on its estimated
bandwidth. Then the surplus ("extra_acked") is recorded in a windowed-max
filter to estimate the recent level of observed ACK aggregation. Then cwnd
is increased by the ACK aggregation estimate. The larger cwnd avoids BBR
being cwnd-limited in the face of ACK silences that recent history suggests
were caused by aggregation. As a sanity check, the ACK aggregation degree
is upper-bounded by the cwnd (at the time of measurement) and a global max
of BW * 100ms. The algorithm is further described by the following
presentation:
https://datatracker.ietf.org/meeting/101/materials/slides-101-iccrg-an-update-on-bbr-work-at-google-00
In our internal testing, we observed a significant increase in BBR
throughput (measured using netperf), in a basic wifi setup.
- Host1 (sender on ethernet) -> AP -> Host2 (receiver on wifi)
- 2.4 GHz -> BBR before: ~73 Mbps; BBR after: ~102 Mbps; CUBIC: ~100 Mbps
- 5.0 GHz -> BBR before: ~362 Mbps; BBR after: ~593 Mbps; CUBIC: ~601 Mbps
Also, this code is running globally on YouTube TCP connections and produced
significant bandwidth increases for YouTube traffic.
This is based on Ian Swett's max_ack_height_ algorithm from the
QUIC BBR implementation.
Signed-off-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 232aa8ec3ed979d4716891540c03a806ecab0c37 upstream.
Because bbr_target_cwnd() is really a general-purpose BBR helper for
computing some volume of inflight data as a function of the estimated
BDP, refactor it into following helper functions:
- bbr_bdp()
- bbr_quantization_budget()
- bbr_inflight()
Signed-off-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e3336cab2579012b1e72b5265adf98e2d6e244ad upstream.
We've met softlockup with "CONFIG_PREEMPT_NONE=y", when the target memcg
doesn't have any reclaimable memory.
It can be easily reproduced as below:
watchdog: BUG: soft lockup - CPU#0 stuck for 111s![memcg_test:2204]
CPU: 0 PID: 2204 Comm: memcg_test Not tainted 5.9.0-rc2+ #12
Call Trace:
shrink_lruvec+0x49f/0x640
shrink_node+0x2a6/0x6f0
do_try_to_free_pages+0xe9/0x3e0
try_to_free_mem_cgroup_pages+0xef/0x1f0
try_charge+0x2c1/0x750
mem_cgroup_charge+0xd7/0x240
__add_to_page_cache_locked+0x2fd/0x370
add_to_page_cache_lru+0x4a/0xc0
pagecache_get_page+0x10b/0x2f0
filemap_fault+0x661/0xad0
ext4_filemap_fault+0x2c/0x40
__do_fault+0x4d/0xf9
handle_mm_fault+0x1080/0x1790
It only happens on our 1-vcpu instances, because there's no chance for
oom reaper to run to reclaim the to-be-killed process.
Add a cond_resched() at the upper shrink_node_memcgs() to solve this
issue, this will mean that we will get a scheduling point for each memcg
in the reclaimed hierarchy without any dependency on the reclaimable
memory in that memcg thus making it more predictable.
Suggested-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Xunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: http://lkml.kernel.org/r/1598495549-67324-1-git-send-email-xlpang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Julius Hemanth Pitti <jpitti@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a0d1c951ef08ed24f35129267e3595d86f57f5d3 upstream.
As Documentation/kbuild/llvm.rst implies, building the kernel with a
full set of LLVM tools gets very verbose and unwieldy.
Provide a single switch LLVM=1 to use Clang and LLVM tools instead
of GCC and Binutils. You can pass it from the command line or as an
environment variable.
Please note LLVM=1 does not turn on the integrated assembler. You need
to pass LLVM_IAS=1 to use it. When the upstream kernel is ready for the
integrated assembler, I think we can make it default.
We discussed what we need, and we agreed to go with a simple boolean
flag that switches both target and host tools:
https://lkml.org/lkml/2020/3/28/494https://lkml.org/lkml/2020/4/3/43
Some items discussed, but not adopted:
- LLVM_DIR
When multiple versions of LLVM are installed, I just thought supporting
LLVM_DIR=/path/to/my/llvm/bin/ might be useful.
CC = $(LLVM_DIR)clang
LD = $(LLVM_DIR)ld.lld
...
However, we can handle this by modifying PATH. So, we decided to not do
this.
- LLVM_SUFFIX
Some distributions (e.g. Debian) package specific versions of LLVM with
naming conventions that use the version as a suffix.
CC = clang$(LLVM_SUFFIX)
LD = ld.lld(LLVM_SUFFIX)
...
will allow a user to pass LLVM_SUFFIX=-11 to use clang-11 etc.,
but the suffixed versions in /usr/bin/ are symlinks to binaries in
/usr/lib/llvm-#/bin/, so this can also be handled by PATH.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com> # build
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
[nd: conflict in exported vars list from not backporting commit
e83b9f55448a ("kbuild: add ability to generate BTF type info for vmlinux")]
[nd: hunk against Documentation/kbuild/kbuild.rst dropped due to not backporting
commit cd238effefa2 ("docs: kbuild: convert docs to ReST and rename to *.rst")]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e20e47c70f810d678d02941fa3c671209c4ca97 upstream.
The 'AS' variable is unused for building the kernel. Only the remaining
usage is to turn on the integrated assembler. A boolean flag is a better
fit for this purpose.
AS=clang was added for experts. So, I replaced it with LLVM_IAS=1,
breaking the backward compatibility.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa824e0c962b532d5073cbb41b2efcd6f5e72bae upstream.
As commit 5ef872636ca7 ("kbuild: get rid of misleading $(AS) from
documents") noted, we rarely use $(AS) directly in the kernel build.
Now that the only/last user of $(AS) in drivers/net/wan/Makefile was
converted to $(CC), $(AS) is no longer used in the build process.
You can still pass in AS=clang, which is just a switch to turn on
the LLVM integrated assembler.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
[nd: conflict in exported vars list from not backporting commit
e83b9f55448a ("kbuild: add ability to generate BTF type info for vmlinux")]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eefb8c124fd969e9a174ff2bedff86aa305a7438 upstream.
Introduce a new READELF variable to top-level Makefile, so the name of
readelf binary can be specified.
Before this change the name of the binary was hardcoded to
"$(CROSS_COMPILE)readelf" which might not be present for every
toolchain.
This allows to build with LLVM Object Reader by using make parameter
READELF=llvm-readelf.
Link: https://github.com/ClangBuiltLinux/linux/issues/771
Signed-off-by: Dmitry Golovin <dima@golovin.in>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
[nd: conflict in exported vars list from not backporting commit
e83b9f55448a ("kbuild: add ability to generate BTF type info for vmlinux")]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 734f3719d3438f9cc181d674c33ca9762e9148a1 upstream.
The firmware source, wanxlfw.S, is currently compiled by the combo of
$(CPP) and $(M68KAS). This is not what we usually do for compiling *.S
files. In fact, this Makefile is the only user of $(AS) in the kernel
build.
Instead of combining $(CPP) and (AS) from different tool sets, using
$(M68KCC) as an assembler driver is simpler, and saner.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 63b903dfebdea92aa92ad337d8451a6fbfeabf9d upstream.
As far as I understood from the Kconfig help text, this build rule is
used to rebuild the driver firmware, which runs on an old m68k-based
chip. So, you need m68k tools for the firmware rebuild.
wanxl.c is a PCI driver, but CONFIG_M68K does not select CONFIG_HAVE_PCI.
So, you cannot enable CONFIG_WANXL_BUILD_FIRMWARE for ARCH=m68k. In other
words, ifeq ($(ARCH),m68k) is false here.
I am keeping the dead code for now, but rebuilding the firmware requires
'as68k' and 'ld68k', which I do not have in hand.
Instead, the kernel.org m68k GCC [1] successfully built it.
Allowing a user to pass in CROSS_COMPILE_M68K= is handier.
[1] https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/9.2.0/x86_64-gcc-9.2.0-nolibc-m68k-linux.tar.xz
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0f44fbc162b737ff6251ae248184390ae2279fee upstream.
The tool is called llvm-size, not llvm-objsize.
Fixes: fcf1b6a35c16 ("Documentation/llvm: add documentation on building w/ Clang/LLVM")
Signed-off-by: Fangrui Song <maskray@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fcf1b6a35c16ac500fa908a4022238e5d666eabf upstream.
added to kbuild documentation. Provides more official info on building
kernels with Clang and LLVM than our wiki.
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
[nd: hunk against Documentation/kbuild/index.rst dropped due to not backporting
commit cd238effefa2 ("docs: kbuild: convert docs to ReST and rename to *.rst")]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7bac98707f65b93bf994ef4e99b1eb9e7dbb9c32 upstream.
Define and export OBJSIZE variable for "size" tool from binutils to be
used in architecture specific Makefiles (naming the variable just "SIZE"
would be too risky). In particular this tool is useful to perform checks
that early boot code is not using bss section (which might have not been
zeroed yet or intersects with initrd or other files boot loader might
have put right after the linux kernel).
Link: http://lkml.kernel.org/r/patch-1.thread-2257a1.git-188f5a3d81d5.your-ad-here.call-01565088755-ext-5120@work.hours
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
[nd: conflict in exported vars list from not backporting commit
e83b9f55448a ("kbuild: add ability to generate BTF type info for vmlinux")]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8708e13c6a0600625eea3aebd027c0715a5d2bb2 upstream.
Add keyword support so that our mailing list gets cc'ed for clang/llvm
patches. We're pretty active on our mailing list so far as code review.
There are numerous Googlers like myself that are paid to support
building the Linux kernel with Clang and LLVM.
Link: http://lkml.kernel.org/r/20190620001907.255803-1-ndesaulniers@google.com
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2fbc6e89b2f1403189e624cabaf73e189c5e50c6 ]
Kfir reported that pmtu exceptions are not created properly for
deployments where multipath routes use the same device.
After some digging I see 2 compounding problems:
1. ip_route_output_key_hash_rcu is updating the flowi4_oif *after*
the route lookup. This is the second use case where this has
been a problem (the first is related to use of vti devices with
VRF). I can not find any reason for the oif to be changed after the
lookup; the code goes back to the start of git. It does not seem
logical so remove it.
2. fib_lookups for exceptions do not call fib_select_path to handle
multipath route selection based on the hash.
The end result is that the fib_lookup used to add the exception
always creates it based using the first leg of the route.
An example topology showing the problem:
| host1
+------+
| eth0 | .209
+------+
|
+------+
switch | br0 |
+------+
|
+---------+---------+
| host2 | host3
+------+ +------+
| eth0 | .250 | eth0 | 192.168.252.252
+------+ +------+
+-----+ +-----+
| vti | .2 | vti | 192.168.247.3
+-----+ +-----+
\ /
=================================
tunnels
192.168.247.1/24
for h in host1 host2 host3; do
ip netns add ${h}
ip -netns ${h} link set lo up
ip netns exec ${h} sysctl -wq net.ipv4.ip_forward=1
done
ip netns add switch
ip -netns switch li set lo up
ip -netns switch link add br0 type bridge stp 0
ip -netns switch link set br0 up
for n in 1 2 3; do
ip -netns switch link add eth-sw type veth peer name eth-h${n}
ip -netns switch li set eth-h${n} master br0 up
ip -netns switch li set eth-sw netns host${n} name eth0
done
ip -netns host1 addr add 192.168.252.209/24 dev eth0
ip -netns host1 link set dev eth0 up
ip -netns host1 route add 192.168.247.0/24 \
nexthop via 192.168.252.250 dev eth0 nexthop via 192.168.252.252 dev eth0
ip -netns host2 addr add 192.168.252.250/24 dev eth0
ip -netns host2 link set dev eth0 up
ip -netns host2 addr add 192.168.252.252/24 dev eth0
ip -netns host3 link set dev eth0 up
ip netns add tunnel
ip -netns tunnel li set lo up
ip -netns tunnel li add br0 type bridge
ip -netns tunnel li set br0 up
for n in $(seq 11 20); do
ip -netns tunnel addr add dev br0 192.168.247.${n}/24
done
for n in 2 3
do
ip -netns tunnel link add vti${n} type veth peer name eth${n}
ip -netns tunnel link set eth${n} mtu 1360 master br0 up
ip -netns tunnel link set vti${n} netns host${n} mtu 1360 up
ip -netns host${n} addr add dev vti${n} 192.168.247.${n}/24
done
ip -netns tunnel ro add default nexthop via 192.168.247.2 nexthop via 192.168.247.3
ip netns exec host1 ping -M do -s 1400 -c3 -I 192.168.252.209 192.168.247.11
ip netns exec host1 ping -M do -s 1400 -c3 -I 192.168.252.209 192.168.247.15
ip -netns host1 ro ls cache
Before this patch the cache always shows exceptions against the first
leg in the multipath route; 192.168.252.250 per this example. Since the
hash has an initial random seed, you may need to vary the final octet
more than what is listed. In my tests, using addresses between 11 and 19
usually found 1 that used both legs.
With this patch, the cache will have exceptions for both legs.
Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions")
Reported-by: Kfir Itzhak <mastertheknife@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4a009cb04aeca0de60b73f37b102573354214b52 ]
skb_put_padto() and __skb_put_padto() callers
must check return values or risk use-after-free.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c2b727df7caa33876e7066bde090f40001b6d643 ]
If we have unbound the PHY driver prior to calling phy_detach() (often
via phy_disconnect()) then we can cause a NULL pointer de-reference
accessing the driver owner member. The steps to reproduce are:
echo unimac-mdio-0:01 > /sys/class/net/eth0/phydev/driver/unbind
ip link set eth0 down
Fixes: cafe8df8b9bc ("net: phy: Fix lack of reference count on PHY driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a53906908148d64423398a62c4435efb0d09652c ]
All changes related to bp->link_info require the protection of the
link_lock mutex. It's not sufficient to rely just on RTNL.
Fixes: 163e9ef63641 ("bnxt_en: Fix race when modifying pause settings.")
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d69753fa1ecb3218b56b022722f7a5822735b876 ]
Returning "unknown" as a temperature value violates the hwmon interface
rules. Appropriate error codes should be returned via device_attribute
show instead. These will ultimately be propagated to the user via the
file system interface.
In addition to the corrected error handling, it is an even better idea to
not present the sensor in sysfs at all if it is known that the read will
definitely fail. Given that temp1_input is currently the only sensor
reported, ensure no hwmon registration if TEMP_MONITOR_QUERY is not
supported or if it will fail due to access permissions. Something smarter
may be needed if and when other sensors are added.
Fixes: 12cce90b934b ("bnxt_en: fix HWRM error when querying VF temperature")
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ff48b6222e65ebdba5a403ef1deba6214e749193 ]
In tipc_buf_append() it may change skb's frag_list, and it causes
problems when this skb is cloned. skb_unclone() doesn't really
make this skb's flag_list available to change.
Shuang Li has reported an use-after-free issue because of this
when creating quite a few macvlan dev over the same dev, where
the broadcast packets will be cloned and go up to the stack:
[ ] BUG: KASAN: use-after-free in pskb_expand_head+0x86d/0xea0
[ ] Call Trace:
[ ] dump_stack+0x7c/0xb0
[ ] print_address_description.constprop.7+0x1a/0x220
[ ] kasan_report.cold.10+0x37/0x7c
[ ] check_memory_region+0x183/0x1e0
[ ] pskb_expand_head+0x86d/0xea0
[ ] process_backlog+0x1df/0x660
[ ] net_rx_action+0x3b4/0xc90
[ ]
[ ] Allocated by task 1786:
[ ] kmem_cache_alloc+0xbf/0x220
[ ] skb_clone+0x10a/0x300
[ ] macvlan_broadcast+0x2f6/0x590 [macvlan]
[ ] macvlan_process_broadcast+0x37c/0x516 [macvlan]
[ ] process_one_work+0x66a/0x1060
[ ] worker_thread+0x87/0xb10
[ ]
[ ] Freed by task 3253:
[ ] kmem_cache_free+0x82/0x2a0
[ ] skb_release_data+0x2c3/0x6e0
[ ] kfree_skb+0x78/0x1d0
[ ] tipc_recvmsg+0x3be/0xa40 [tipc]
So fix it by using skb_unshare() instead, which would create a new
skb for the cloned frag and it'll be safe to change its frag_list.
The similar things were also done in sctp_make_reassembled_event(),
which is using skb_copy().
Reported-by: Shuang Li <shuali@redhat.com>
Fixes: 37e22164a8a3 ("tipc: rename and move message reassembly function")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a4b5cc9e10803ecba64a7d54c0f47e4564b4a980 ]
I confirmed that the problem fixed by commit 2a63866c8b51a3f7 ("tipc: fix
shutdown() of connectionless socket") also applies to stream socket.
----------
#include <sys/socket.h>
#include <unistd.h>
#include <sys/wait.h>
int main(int argc, char *argv[])
{
int fds[2] = { -1, -1 };
socketpair(PF_TIPC, SOCK_STREAM /* or SOCK_DGRAM */, 0, fds);
if (fork() == 0)
_exit(read(fds[0], NULL, 1));
shutdown(fds[0], SHUT_RDWR); /* This must make read() return. */
wait(NULL); /* To be woken up by _exit(). */
return 0;
}
----------
Since shutdown(SHUT_RDWR) should affect all processes sharing that socket,
unconditionally setting sk->sk_shutdown to SHUTDOWN_MASK will be the right
behavior.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bb3a420d47ab00d7e1e5083286cab15235a96680 ]
tipc_group_add_to_tree() returns silently if `key` matches `nkey` of an
existing node, causing tipc_group_create_member() to leak memory. Let
tipc_group_add_to_tree() return an error in such a case, so that
tipc_group_create_member() can handle it properly.
Fixes: 75da2163dbb6 ("tipc: introduce communication groups")
Reported-and-tested-by: syzbot+f95d90c454864b3b5bc9@syzkaller.appspotmail.com
Cc: Hillf Danton <hdanton@sina.com>
Link: https://syzkaller.appspot.com/bug?id=048390604fe1b60df34150265479202f10e13aff
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5f6857e808a8bd078296575b417c4b9d160b9779 ]
struct ethtool_fecparam carries bitmasks not bit numbers.
We want to return 1 (NONE), not 0.
Fixes: 0d0870938337 ("nfp: implement ethtool FEC mode settings")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2fb541c862c987d02dfdf28f1545016deecfa0d5 ]
Currently there is concurrent reset and enqueue operation for the
same lockless qdisc when there is no lock to synchronize the
q->enqueue() in __dev_xmit_skb() with the qdisc reset operation in
qdisc_deactivate() called by dev_deactivate_queue(), which may cause
out-of-bounds access for priv->ring[] in hns3 driver if user has
requested a smaller queue num when __dev_xmit_skb() still enqueue a
skb with a larger queue_mapping after the corresponding qdisc is
reset, and call hns3_nic_net_xmit() with that skb later.
Reused the existing synchronize_net() in dev_deactivate_many() to
make sure skb with larger queue_mapping enqueued to old qdisc(which
is saved in dev_queue->qdisc_sleeping) will always be reset when
dev_reset_queue() is called.
Fixes: 6b3ba9146fe6 ("net: sched: allow qdiscs to handle locking")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit db7cd91a4be15e1485d6b58c6afc8761c59c4efb ]
When IPV6_SEG6_HMAC is enabled and CRYPTO is disabled, it results in the
following Kbuild warning:
WARNING: unmet direct dependencies detected for CRYPTO_HMAC
Depends on [n]: CRYPTO [=n]
Selected by [y]:
- IPV6_SEG6_HMAC [=y] && NET [=y] && INET [=y] && IPV6 [=y]
WARNING: unmet direct dependencies detected for CRYPTO_SHA1
Depends on [n]: CRYPTO [=n]
Selected by [y]:
- IPV6_SEG6_HMAC [=y] && NET [=y] && INET [=y] && IPV6 [=y]
WARNING: unmet direct dependencies detected for CRYPTO_SHA256
Depends on [n]: CRYPTO [=n]
Selected by [y]:
- IPV6_SEG6_HMAC [=y] && NET [=y] && INET [=y] && IPV6 [=y]
The reason is that IPV6_SEG6_HMAC selects CRYPTO_HMAC, CRYPTO_SHA1, and
CRYPTO_SHA256 without depending on or selecting CRYPTO while those configs
are subordinate to CRYPTO.
Honor the kconfig menu hierarchy to remove kconfig dependency warnings.
Fixes: bf355b8d2c30 ("ipv6: sr: add core files for SR HMAC support")
Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4ddcaf1ebb5e4e99240f29d531ee69d4244fe416 ]
When removing a port from a VLAN we are just erasing the
member config for the VLAN, which is wrong: other ports
can be using it.
Just mask off the port and only zero out the rest of the
member config once ports using of the VLAN are removed
from it.
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 297e77e53eadb332d5062913447b104a772dc33b ]
The parameter passed via DCB_ATTR_DCB_BUFFER is a struct dcbnl_buffer. The
field prio2buffer is an array of IEEE_8021Q_MAX_PRIORITIES bytes, where
each value is a number of a buffer to direct that priority's traffic to.
That value is however never validated to lie within the bounds set by
DCBX_MAX_BUFFERS. The only driver that currently implements the callback is
mlx5 (maintainers CCd), and that does not do any validation either, in
particual allowing incorrect configuration if the prio2buffer value does
not fit into 4 bits.
Instead of offloading the need to validate the buffer index to drivers, do
it right there in core, and bounce the request if the value is too large.
CC: Parav Pandit <parav@nvidia.com>
CC: Saeed Mahameed <saeedm@nvidia.com>
Fixes: e549f6f9c098 ("net/dcb: Add dcbnl buffer attribute")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ba9e04a7ddf4f22a10e05bf9403db6b97743c7bf ]
Currently, in tcp_v4_reqsk_send_ack() and tcp_v4_send_reset(), we
echo the TOS value of the received packets in the response.
However, we do not want to echo the lower 2 ECN bits in accordance
with RFC 3168 6.1.5 robustness principles.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 66d42ed8b25b64eb63111a2b8582c5afc8bf1105 ]
There are a couple bugs here:
1) If opt[1] is zero then this results in a forever loop. If the value
is less than 2 then it is invalid.
2) It assumes that "len" is more than sizeof(valid_accm) or 6 which can
result in memory corruption.
In the case of LCP_OPTION_ACCM, then we should check "opt[1]" instead
of "len" because, if "opt[1]" is less than sizeof(valid_accm) then
"nak_len" gets out of sync and it can lead to memory corruption in the
next iterations through the loop. In case of LCP_OPTION_MAGIC, the
only valid value for opt[1] is 6, but the code is trying to log invalid
data so we should only discard the data when "len" is less than 6
because that leads to a read overflow.
Reported-by: ChenNan Of Chaitin Security Research Lab <whutchennan@gmail.com>
Fixes: e022c2f07ae5 ("WAN: new synchronous PPP implementation for generic HDLC.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 34beb21594519ce64a55a498c2fe7d567bc1ca20 ]
This patch adds transport ports information for route lookup so that
IPsec can select Geneve tunnel traffic to do encryption. This is
needed for OVS/OVN IPsec with encrypted Geneve tunnels.
This can be tested by configuring a host-host VPN using an IKE
daemon and specifying port numbers. For example, for an
Openswan-type configuration, the following parameters should be
configured on both hosts and IPsec set up as-per normal:
$ cat /etc/ipsec.conf
conn in
...
left=$IP1
right=$IP2
...
leftprotoport=udp/6081
rightprotoport=udp
...
conn out
...
left=$IP1
right=$IP2
...
leftprotoport=udp
rightprotoport=udp/6081
...
The tunnel can then be setup using "ip" on both hosts (but
changing the relevant IP addresses):
$ ip link add tun type geneve id 1000 remote $IP2
$ ip addr add 192.168.0.1/24 dev tun
$ ip link set tun up
This can then be tested by pinging from $IP1:
$ ping 192.168.0.2
Without this patch the traffic is unencrypted on the wire.
Fixes: 2d07dc79fe04 ("geneve: add initial netdev driver for GENEVE tunnels")
Signed-off-by: Qiuyu Xiao <qiuyu.xiao.qyx@gmail.com>
Signed-off-by: Mark Gray <mark.d.gray@redhat.com>
Reviewed-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 94cc242a067a869c29800aa789d38b7676136e50 ]
Pass the correct offset to clear the stale filter hit
bytes counter. Otherwise, the counter starts incrementing
from the stale information, instead of 0.
Fixes: 12b276fbf6e0 ("cxgb4: add support to create hash filters")
Signed-off-by: Ganji Aravind <ganji.aravind@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ec0abae6dcdf7ef88607c869bf35a4b63ce1b370 ]
A migrating transparent huge page has to already be unmapped. Otherwise,
the page could be modified while it is being copied to a new page and data
could be lost. The function __split_huge_pmd() checks for a PMD migration
entry before calling __split_huge_pmd_locked() leading one to think that
__split_huge_pmd_locked() can handle splitting a migrating PMD.
However, the code always increments the page->_mapcount and adjusts the
memory control group accounting assuming the page is mapped.
Also, if the PMD entry is a migration PMD entry, the call to
is_huge_zero_pmd(*pmd) is incorrect because it calls pmd_pfn(pmd) instead
of migration_entry_to_pfn(pmd_to_swp_entry(pmd)). Fix these problems by
checking for a PMD migration entry.
Fixes: 84c3fc4e9c56 ("mm: thp: check pmd migration entry in common path")
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org> [4.14+]
Link: https://lkml.kernel.org/r/20200903183140.19055-1-rcampbell@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0399092ccebd9feef68d4ceb8d6219a8c0caa05 ]
If a kprobe is marked as gone, we should not kill it again. Otherwise, we
can disarm the kprobe more than once. In that case, the statistics of
kprobe_ftrace_enabled can unbalance which can lead to that kprobe do not
work.
Fixes: e8386a0cb22f ("kprobes: support probing module __exit function")
Co-developed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: "Naveen N . Rao" <naveen.n.rao@linux.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Song Liu <songliubraving@fb.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200822030055.32383-1-songmuchun@bytedance.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f65886606c2d3b562716de030706dfe1bea4ed5e ]
when kmalloc() fails in kvm_io_bus_unregister_dev(), before removing
the bus, we should iterate over all other devices linked to it and call
kvm_iodevice_destructor() for them
Fixes: 90db10434b16 ("KVM: kvm_io_bus_unregister_dev() should never fail")
Cc: stable@vger.kernel.org
Reported-and-tested-by: syzbot+f196caa45793d6374707@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=f196caa45793d6374707
Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200907185535.233114-1-rkovhaev@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 37bd22420f856fcd976989f1d4f1f7ad28e1fcac upstream.
In pfkey_dump() dplen and splen can both be specified to access the
xfrm_address_t structure out of bounds in__xfrm_state_filter_match()
when it calls addr_match() with the indexes. Return EINVAL if either
are out of range.
Signed-off-by: Mark Salyzyn <salyzyn@android.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: kernel-team@android.com
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 72a9c673636b779e370983fea08e40f97039b981 upstream.
A spanking new machine I just got has all but one USB ports wired as 3.0.
Booting defconfig resulted in no keyboard or mouse, which was pretty
uncool. Let's enable that -- USB3 is ubiquitous rather than an oddity.
As 'y' not 'm' -- recovering from initrd problems needs a keyboard.
Also add it to the 32-bit defconfig.
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-usb@vger.kernel.org
Link: http://lkml.kernel.org/r/20181009062803.4332-1-kilobyte@angband.pl
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 437ef802e0adc9f162a95213a3488e8646e5fc03 upstream.
There are 2 problems with it:
1. "<" vs expected "<<"
2. the shift number is an IOMMU page number mask, not an address
mask as the IOMMU page shift is missing.
This did not hit us before f1565c24b596 ("powerpc: use the generic
dma_ops_bypass mode") because we had additional code to handle bypass
mask so this chunk (almost?) never executed.However there were
reports that aacraid does not work with "iommu=nobypass".
After f1565c24b596, aacraid (and probably others which call
dma_get_required_mask() before setting the mask) was unable to enable
64bit DMA and fall back to using IOMMU which was known not to work,
one of the problems is double free of an IOMMU page.
This fixes DMA for aacraid, both with and without "iommu=nobypass" in
the kernel command line. Verified with "stress-ng -d 4".
Fixes: 6a5c7be5e484 ("powerpc: Override dma_get_required_mask by platform hook and ops")
Cc: stable@vger.kernel.org # v3.2+
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200908015106.79661-1-aik@ozlabs.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 29231826f3bd65500118c473fccf31c0cf14dbc0 upstream.
The CRC calculation done by genksyms is triggered when the parser hits
EXPORT_SYMBOL*() macros. At this point, genksyms recursively expands the
types of the function parameters, and uses that as the input for the CRC
calculation. In the case of forward-declared structs, the type expands
to 'UNKNOWN'. Following this, it appears that the result of the
expansion of each type is cached somewhere, and seems to be re-used
when/if the same type is seen again for another exported symbol in the
same C file.
Unfortunately, this can cause CRC 'stability' issues when a struct
definition becomes visible in the middle of a C file. For example, let's
assume code with the following pattern:
struct foo;
int bar(struct foo *arg)
{
/* Do work ... */
}
EXPORT_SYMBOL_GPL(bar);
/* This contains struct foo's definition */
#include "foo.h"
int baz(struct foo *arg)
{
/* Do more work ... */
}
EXPORT_SYMBOL_GPL(baz);
Here, baz's CRC will be computed using the expansion of struct foo that
was cached after bar's CRC calculation ('UNKOWN' here). But if
EXPORT_SYMBOL_GPL(bar) is removed from the file (because of e.g. symbol
trimming using CONFIG_TRIM_UNUSED_KSYMS), struct foo will be expanded
late, during baz's CRC calculation, which now has visibility over the
full struct definition, hence resulting in a different CRC for baz.
The proper fix for this certainly is in genksyms, but that will take me
some time to get right. In the meantime, we have seen one occurrence of
this in the ehci-hcd code which hits this problem because of the way it
includes C files halfway through the code together with an unlucky mix
of symbol trimming.
In order to workaround this, move the include done in ehci-hub.c early
in ehci-hcd.c, hence making sure the struct definitions are visible to
the entire file. This improves CRC stability of the ehci-hcd exports
even when symbol trimming is enabled.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20200916171825.3228122-1-qperret@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
