IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Chipsets before SM8450 have only one broadcast register (Broadcast_OR)
which is used to broadcast writes and check for status bit 0 only in
all channels.
>From SM8450 onwards, a new Broadcast_AND region was added
which checks for status bit 1. This hasn't been updated and Broadcast_OR
region was wrongly being used to check for status bit 1 all along.
Hence mapping Broadcast_AND region's address space to LLCC in SM8550.
Signed-off-by: Unnathi Chalicheemala <quic_uchalich@quicinc.com>
Link: https://lore.kernel.org/r/9bb6e086adec4d3b2134462d504822fb79b009e7.1717014052.git.quic_uchalich@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Chipsets before SM8450 have only one broadcast register (Broadcast_OR)
which is used to broadcast writes and check for status bit 0 only in
all channels.
>From SM8450 onwards, a new Broadcast_AND region was added which checks
for status bit 1. This hasn't been updated and Broadcast_OR region
was wrongly being used to check for status bit 1 all along.
Hence mapping Broadcast_AND region's address space to LLCC in SM8450.
Signed-off-by: Unnathi Chalicheemala <quic_uchalich@quicinc.com>
Link: https://lore.kernel.org/r/bfc817da4188abdf5b543bedafb9cb0eb82806c2.1717014052.git.quic_uchalich@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The SHIFTphone 8 is an upcoming QCM6490 smartphone, it has the following
features:
* 12GB of RAM, 512GB UFS storage
* 1080p display.
* Hardware kill switches for cameras and microphones
* UART access via type-c SBU pins (enabled by an internal switch)
Initial support includes:
* Framebuffer display
* UFS and sdcard storage
* Battery monitoring and USB role switching via pmic glink
* Bluetooth
* Thermals
* Wifi
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20240530-otter-bringup-v3-2-79e7a28c1b08@linaro.org
[bjorn: Fixed indent of block comments]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
During the initial bringup, all of the peripherals on non-SMB PMICs
were either not used, or were not necessary to accomplish certain
goals. This however, left a hole in the hardware description.
Add the missing ones.
Note that the PM8010 errors out on reads on the CRD (works fine on the
QCP) for reasons unknown, but that shall be ironed out in the future..
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240529-topic-x1e_pmic-v1-2-9de0506179eb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the device-tree nodes for the TBUs (translation buffer units) that
are present on the sc7280 platforms. The TBUs can be used debug the
kernel and provide additional information when a context faults occur.
Describe all the registers, clocks, interconnects and power-domain
resources that are needed for each of the TBUs.
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Link: https://lore.kernel.org/r/20240417133731.2055383-8-quic_c_gdjako@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the device-tree nodes for the TBUs (translation buffer units) that
are present on the sdm845 platforms. The TBUs can be used debug the
kernel and provide additional information when a context faults occur.
Describe the all registers, clocks, interconnects and power-domain
resources that are needed for each of the TBUs.
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Link: https://lore.kernel.org/r/20240417133731.2055383-6-quic_c_gdjako@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
PCIe host controller driver needs to choose the appropriate performance
state of RPMh power domain and interconnect bandwidth based on the PCIe
data rate.
Hence, add the OPP table support to specify RPMh performance states and
interconnect peak bandwidth.
It should be noted that the different link configurations may share the
same aggregate bandwidth, e.g., a 2.5 GT/s x2 link and a 5.0 GT/s x1
link have the same bandwidth and share the same OPP entry.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Link: https://lore.kernel.org/r/20240518-opp_support-v13-4-78c73edf50de@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Ethernet devices are cache coherent, mark it as such in the dtsi.
Fixes: ff499a0fbb23 ("arm64: dts: qcom: sa8775p: add the first 1Gb ethernet interface")
Fixes: e952348a7cc7 ("arm64: dts: qcom: sa8775p: add a node for EMAC1")
Signed-off-by: Sagar Cheluvegowda <quic_scheluve@quicinc.com>
Link: https://lore.kernel.org/r/20240514-mark_ethernet_devices_dma_coherent-v4-1-04e1198858c5@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The ath10k driver waits for an "MSA_READY" indicator
to complete initialization. If the indicator is not
received, then the device remains unusable.
cf. ath10k_qmi_driver_event_work()
Several msm8998-based devices are affected by this issue.
Oddly, it seems safe to NOT wait for the indicator, and
proceed immediately when QMI_EVENT_SERVER_ARRIVE.
Jeff Johnson wrote:
The feedback I received was "it might be ok to change all ath10k qmi
to skip waiting for msa_ready", and it was pointed out that ath11k
(and ath12k) do not wait for it.
However with so many deployed devices, "might be ok" isn't a strong
argument for changing the default behavior.
cf. also
https://wiki.postmarketos.org/wiki/Qualcomm_Snapdragon_835_(MSM8998)#WLAN
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/0914f96e-fcfd-4088-924a-fc1991bce75f@freebox.fr
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Arm heterogeneous configurations should have separate PMU nodes for each
CPU uarch as the uarch specific events can be different. The
"arm,armv8-pmuv3" compatible is also intended for s/w models rather than
specific uarch implementations.
All the kryo CPUs are missing PMU compatibles, so they can't be fixed.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20240417204247.3216703-1-robh@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Follow the updated bindings and use a QCS404-specific compatible for the
HFPLL on this SoC.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240218-hfpll-yaml-v2-3-31543e0d6261@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Motorola Moto G4 Play is an msm8916 based smartphone.
Supported features:
- eMMC and SD;
- Buttons;
- Touchscreen;
- USB;
- Fuel Gauge;
- Sound;
- Accelerometer.
msm8916 Moto devices share significant portion of the design so the
common parts are separated into a common dtsi.
Signed-off-by: Ruby Iris Juric <ruby@srxl.me>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
[Nikita: Split up to common dtsi]
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240405-msm8916-moto-init-v1-2-502b58176d34@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Core Prime LTE uses ST LIS2HH12 accelerometer. Add support for it.
[Stephen: Use common &st_accel definition from common dtsi]
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Link: https://lore.kernel.org/r/20240406111348.14358-4-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some Grand Prime use a ST LSM303C accelerometer/magnetometer combo.
Add support for it.
Signed-off-by: Siddharth Manthan <siddharth.manthan@gmail.com>
[Stephan: Move sensors to common dtsi (disabled by default)]
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
[Raymond: Use interrupts-extended]
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Link: https://lore.kernel.org/r/20240406111348.14358-3-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some Grand Prime use a Bosch BMC150 accelerometer/magnetometer combo.
The chip provides two separate I2C devices for the accelerometer
and magnetometer that are already supported by the bmc150-accel
and bmc150-magn driver.
Signed-off-by: Joe Mason <buddyjojo06@outlook.com>
[Stephan: Move sensors to common dtsi, disabled by default]
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
[Raymond: Add it to grandprimelte. Use interrupts-extended]
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Link: https://lore.kernel.org/r/20240406111348.14358-2-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This node is actually found on some msm8953 devices (xiaomi-mido) and
allows irled enablement
Signed-off-by: Gianluca Boiano <morf3089@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240402-pmi8950-pwm-support-v1-2-1a66899eeeb3@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There is no need to mention and/or to touch in any way the intermediate
(source) clocks. Drop them from MSM8996 UFSHCD schema, making it follow
the example lead by all other platforms.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240408-msm8996-fix-ufs-v4-4-ee1a28bf8579@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Instead of setting the frequency of the interim UFS_ICE_CORE_CLK_SRC
clock, set the frequency of the leaf GCC_UFS_ICE_CORE_CLK clock directly.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240408-msm8996-fix-ufs-v4-2-ee1a28bf8579@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Follow the example of other platforms and specify core_clk frequencies
in the frequency table in addition to the core_clk_src frequencies. The
driver should be setting the leaf frequency instead of some interim
clock freq.
Suggested-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Fixes: 57fc67ef0d35 ("arm64: dts: qcom: msm8996: Add ufs related nodes")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240408-msm8996-fix-ufs-v4-1-ee1a28bf8579@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The ADSP provides fastrpc/compute capabilities. Enable support for the
fastrpc on this DSP.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240418-msm8996-remoteproc-v2-3-b9ae852bf6bc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
MSM8996 provides limited glink support, so add corresponding device tree
nodes. For example the following interfaces are provided on db820c:
modem:
2080000.remoteproc:glink-edge.LOOPBACK_CTL_MPSS.-1.-1
2080000.remoteproc:glink-edge.glink_ssr.-1.-1
2080000.remoteproc:glink-edge.rpmsg_chrdev.0.0
adsp:
9300000.remoteproc:glink-edge.LOOPBACK_CTL_LPASS.-1.-1
9300000.remoteproc:glink-edge.glink_ssr.-1.-1
9300000.remoteproc:glink-edge.rpmsg_chrdev.0.0
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240418-msm8996-remoteproc-v2-2-b9ae852bf6bc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add device tree source for the TP-Link Archer AX55 v1 [1]
which is a dual-band WiFi router based on the IPQ5018 SoC.
At the moment, only the UART, the GPIO LEDs and buttons
are usable, but it makes it possible to boot an initramfs
image on the device.
The device tree can be extended in the future, once support
for other periherals will be available for the platform.
1. https://www.tp-link.com/en/home-networking/wifi-router/archer-ax55/v1/
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20240326-archer-ax55-v1-v4-2-dc5b54a4bb00@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The PCIe EP controller on SA8775P supports cache coherency, hence add
the "dma-coherent" property to mark it as such.
Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1710166298-27144-4-git-send-email-quic_msarkar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The IPQ95xx uses an IPQ4019 compatible MDIO controller that is already
supported. Add a DT node to expose it.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Link: https://lore.kernel.org/r/20240507024758.2810514-2-mr.nuke.me@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the nodes describing the apps and gpu iommu and its context banks
that are found on msm8976 SoCs.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Link: https://lore.kernel.org/r/20240508163455.8757-2-a39.skl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the different services found on APR on some devices with SC7280 SoC.
Additionally add an empty sound node in the root node as is seen on
other SoC dtsi files so device dt's can easily use that.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20240510-sc7280-apr-v1-1-e9eabda05f85@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On most devices, TZ seems to be blocking access to the PSHOLD reboot
register. This seems to be TZ, as even kicking the hypervisor doesn't
seem to make it writable.
Fixes: 865ff2e6f5da ("arm64: dts: qcom: sc8280xp: Add PS_HOLD restart")
Reported-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Link: https://lore.kernel.org/r/20240510-topic-8280_off-v1-1-bcc70cda449e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Follow other Qualcomm platforms and rename pm8150b_role_switch_in to
pm8150_hs_in. Corresponding port is described as HS port rather than
role switching.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240512-typec-fix-sm8250-v4-9-ad153c747a97@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Follow example of other platforms. Rename HS graph nodes to contain
'dwc3_hs' and link SS lanes from DWC3 controllers to QMP PHYs.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240512-typec-fix-sm8250-v4-8-ad153c747a97@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Follow example of other platforms. Rename HS graph nodes to contain
'dwc3_hs' and link SS lanes from DWC3 controllers to QMP PHYs.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240512-typec-fix-sm8250-v4-7-ad153c747a97@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Follow example of other platforms. Rename HS graph nodes to contain
'dwc3_hs' and link SS lanes from DWC3 controllers to QMP PHYs.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240512-typec-fix-sm8250-v4-6-ad153c747a97@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
To follow other Qualcomm platforms, update QMP USB+DP PHYs to use newer
bindings rather than old bindings which had PHYs as subdevices.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240512-typec-fix-sm8250-v4-5-ad153c747a97@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The SuperSpeed signals originate from the DWC3 host controller and then
are routed through the Combo QMP PHY, where they are multiplexed with
the DisplayPort signals. Add corresponding OF graph link.
Reported-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240512-typec-fix-sm8250-v4-4-ad153c747a97@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The OF graph should describe physical signals. There is no 'role switch'
signal between Type-C connector and the DWC3 USB controller. Rename
endpoints to mention USB HS signal instead (this follows the example
lead by other plaforms, including QRB2210 RB1, QRB4210 RB2 and all PMIC
GLINK platforms).
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240512-typec-fix-sm8250-v4-3-ad153c747a97@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Correct the clocks being used by the display clock controller on the
SC8180X platform (to match the schema):
- Drop the sleep clock
- Add DSI clocks
- Reorder eDP / DP clocks
This changes the order of clocks, however it should be noted that the
clock list was neither correct nor followed the schema beforehand.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240512-typec-fix-sm8250-v4-2-ad153c747a97@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
15 qcom platform DTSI files define an adreno_smmu node.
msm8998 is the only one with adreno_smmu disabled by default.
There's no reason why this SMMU should be disabled by default,
it doesn't need any further configuration.
Bring msm8998 in line with the 14 other platforms.
This fixes GPU init failing with ENODEV:
msm_dpu c901000.display-controller: failed to load adreno gpu
msm_dpu c901000.display-controller: failed to bind 5000000.gpu (ops a3xx_ops): -19
Fixes: 87cd46d68aeac8 ("Configure Adreno GPU and related IOMMU")
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/be51d1a4-e8fc-48d1-9afb-a42b1d6ca478@freebox.fr
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This add initial support for the Lenovo Smart Tab M10 (WiFi)
(model tbx605f) which is a 10.1" tablet by Lenovo based on the
SDM450 SoC.
It has a 10.1" LCP touch panel, SDCard slot, Volume+Power buttons,
USB-C port amd front-facing camera (not supported).
The proper LCP Panel support will be added later, for now using the
simeple-framebuffer with the bootloader-initialized video memory.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240523-topic-sdm450-upstream-tbx605f-v1-3-e52b89133226@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
