IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 02444f2ac26eae6385a65fcd66915084d15dffba ]
Writing sequentially to a huge file on btrfs on a SMR HDD revealed a
decline of the performance (220 MiB/s to 30 MiB/s after 500 minutes).
The performance goes down because of increased latency of the extent
allocation, which is induced by a traversing of a lot of full block groups.
So, this patch optimizes the ffe_ctl->hint_byte by choosing a block group
with sufficient size from the active block group list, which does not
contain full block groups.
After applying the patch, the performance is maintained well.
Fixes: 2eda57089ea3 ("btrfs: zoned: implement sequential extent allocation")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b271fee9a41ca1474d30639fd6cc912c9901d0f8 ]
Factor out prepare_allocation_zoned() for further extension. While at
it, optimize the if-branch a bit.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 02444f2ac26e ("btrfs: zoned: optimize hint byte for zoned allocator")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9915753037eba7135b209fef4f2afeca841af816 ]
Commit cc4c1d05eb10 ("sc16is7xx: Properly resume TX after stop") changed
behavior to unconditionnaly set the THRI interrupt in sc16is7xx_tx_proc().
For example when sending a 65 bytes message, and assuming the Tx FIFO is
initially empty, sc16is7xx_handle_tx() will write the first 64 bytes of the
message to the FIFO and sc16is7xx_tx_proc() will then activate THRI. When
the THRI IRQ is fired, the driver will write the remaining byte of the
message to the FIFO, and disable THRI by calling sc16is7xx_stop_tx().
When sending a 2 bytes message, sc16is7xx_handle_tx() will write the 2
bytes of the message to the FIFO and call sc16is7xx_stop_tx(), disabling
THRI. After sc16is7xx_handle_tx() exits, control returns to
sc16is7xx_tx_proc() which will unconditionally set THRI. When the THRI IRQ
is fired, the driver simply acknowledges the interrupt and does nothing
more, since all the data has already been written to the FIFO. This results
in 2 register writes and 4 register reads all for nothing and taking
precious cycles from the I2C/SPI bus.
Fix this by enabling the THRI interrupt only when we fill the Tx FIFO to
its maximum capacity and there are remaining bytes to send in the message.
Fixes: cc4c1d05eb10 ("sc16is7xx: Properly resume TX after stop")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20231211171353.2901416-7-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b465848be8a652e2c5fefe102661fb660cff8497 ]
When a serial port is used for kernel console output, then all
modifications to the UART registers which are done from other contexts,
e.g. getty, termios, are interference points for the kernel console.
So far this has been ignored and the printk output is based on the
principle of hope. The rework of the console infrastructure which aims to
support threaded and atomic consoles, requires to mark sections which
modify the UART registers as unsafe. This allows the atomic write function
to make informed decisions and eventually to restore operational state. It
also allows to prevent the regular UART code from modifying UART registers
while printk output is in progress.
All modifications of UART registers are guarded by the UART port lock,
which provides an obvious synchronization point with the console
infrastructure.
To avoid adding this functionality to all UART drivers, wrap the
spin_[un]lock*() invocations for uart_port::lock into helper functions
which just contain the spin_[un]lock*() invocations for now. In a
subsequent step these helpers will gain the console synchronization
mechanisms.
Converted with coccinelle. No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20230914183831.587273-56-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 9915753037eb ("serial: sc16is7xx: fix unconditional activation of THRI interrupt")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0af4bcb49464c221ad5f95d40f2b1b252ceedcc ]
When a serial port is used for kernel console output, then all
modifications to the UART registers which are done from other contexts,
e.g. getty, termios, are interference points for the kernel console.
So far this has been ignored and the printk output is based on the
principle of hope. The rework of the console infrastructure which aims to
support threaded and atomic consoles, requires to mark sections which
modify the UART registers as unsafe. This allows the atomic write function
to make informed decisions and eventually to restore operational state. It
also allows to prevent the regular UART code from modifying UART registers
while printk output is in progress.
All modifications of UART registers are guarded by the UART port lock,
which provides an obvious synchronization point with the console
infrastructure.
Provide wrapper functions for spin_[un]lock*(port->lock) invocations so
that the console mechanics can be applied later on at a single place and
does not require to copy the same logic all over the drivers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20230914183831.587273-2-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 9915753037eb ("serial: sc16is7xx: fix unconditional activation of THRI interrupt")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1adb25df7111de83b64655a80b5a135adbded61 ]
When running stress-ng testing, we found below kernel crash after a few hours:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
pc : dentry_name+0xd8/0x224
lr : pointer+0x22c/0x370
sp : ffff800025f134c0
......
Call trace:
dentry_name+0xd8/0x224
pointer+0x22c/0x370
vsnprintf+0x1ec/0x730
vscnprintf+0x2c/0x60
vprintk_store+0x70/0x234
vprintk_emit+0xe0/0x24c
vprintk_default+0x3c/0x44
vprintk_func+0x84/0x2d0
printk+0x64/0x88
__dump_page+0x52c/0x530
dump_page+0x14/0x20
set_migratetype_isolate+0x110/0x224
start_isolate_page_range+0xc4/0x20c
offline_pages+0x124/0x474
memory_block_offline+0x44/0xf4
memory_subsys_offline+0x3c/0x70
device_offline+0xf0/0x120
......
After analyzing the vmcore, I found this issue is caused by page migration.
The scenario is that, one thread is doing page migration, and we will use the
target page's ->mapping field to save 'anon_vma' pointer between page unmap and
page move, and now the target page is locked and refcount is 1.
Currently, there is another stress-ng thread performing memory hotplug,
attempting to offline the target page that is being migrated. It discovers that
the refcount of this target page is 1, preventing the offline operation, thus
proceeding to dump the page. However, page_mapping() of the target page may
return an incorrect file mapping to crash the system in dump_mapping(), since
the target page->mapping only saves 'anon_vma' pointer without setting
PAGE_MAPPING_ANON flag.
There are seveval ways to fix this issue:
(1) Setting the PAGE_MAPPING_ANON flag for target page's ->mapping when saving
'anon_vma', but this can confuse PageAnon() for PFN walkers, since the target
page has not built mappings yet.
(2) Getting the page lock to call page_mapping() in __dump_page() to avoid crashing
the system, however, there are still some PFN walkers that call page_mapping()
without holding the page lock, such as compaction.
(3) Using target page->private field to save the 'anon_vma' pointer and 2 bits
page state, just as page->mapping records an anonymous page, which can remove
the page_mapping() impact for PFN walkers and also seems a simple way.
So I choose option 3 to fix this issue, and this can also fix other potential
issues for PFN walkers, such as compaction.
Link: https://lkml.kernel.org/r/e60b17a88afc38cb32f84c3e30837ec70b343d2b.1702641709.git.baolin.wang@linux.alibaba.com
Fixes: 64c8902ed441 ("migrate_pages: split unmap_and_move() to _unmap() and _move()")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Xu Yu <xuyu@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eebb3dabbb5cc590afe32880b5d3726d0fbf88db ]
When doing compaction, I found the lru_add_drain() is an obvious hotspot
when migrating pages. The distribution of this hotspot is as follows:
- 18.75% compact_zone
- 17.39% migrate_pages
- 13.79% migrate_pages_batch
- 11.66% migrate_folio_move
- 7.02% lru_add_drain
+ 7.02% lru_add_drain_cpu
+ 3.00% move_to_new_folio
1.23% rmap_walk
+ 1.92% migrate_folio_unmap
+ 3.20% migrate_pages_sync
+ 0.90% isolate_migratepages
The lru_add_drain() was added by commit c3096e6782b7 ("mm/migrate:
__unmap_and_move() push good newpage to LRU") to drain the newpage to LRU
immediately, to help to build up the correct newpage->mlock_count in
remove_migration_ptes() for mlocked pages. However, if there are no
mlocked pages are migrating, then we can avoid this lru drain operation,
especailly for the heavy concurrent scenarios.
So we can record the source pages' mlocked status in
migrate_folio_unmap(), and only drain the lru list when the mlocked status
is set in migrate_folio_move().
In addition, the page was already isolated from lru when migrating, so
checking the mlocked status is stable by folio_test_mlocked() in
migrate_folio_unmap().
After this patch, I can see the hotpot of the lru_add_drain() is gone:
- 9.41% migrate_pages_batch
- 6.15% migrate_folio_move
- 3.64% move_to_new_folio
+ 1.80% migrate_folio_extra
+ 1.70% buffer_migrate_folio
+ 1.41% rmap_walk
+ 0.62% folio_add_lru
+ 3.07% migrate_folio_unmap
Meanwhile, the compaction latency shows some improvements when running
thpscale:
base patched
Amean fault-both-1 1131.22 ( 0.00%) 1112.55 * 1.65%*
Amean fault-both-3 2489.75 ( 0.00%) 2324.15 * 6.65%*
Amean fault-both-5 3257.37 ( 0.00%) 3183.18 * 2.28%*
Amean fault-both-7 4257.99 ( 0.00%) 4079.04 * 4.20%*
Amean fault-both-12 6614.02 ( 0.00%) 6075.60 * 8.14%*
Amean fault-both-18 10607.78 ( 0.00%) 8978.86 * 15.36%*
Amean fault-both-24 14911.65 ( 0.00%) 11619.55 * 22.08%*
Amean fault-both-30 14954.67 ( 0.00%) 14925.66 * 0.19%*
Amean fault-both-32 16654.87 ( 0.00%) 15580.31 * 6.45%*
Link: https://lkml.kernel.org/r/06e9153a7a4850352ec36602df3a3a844de45698.1697859741.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: d1adb25df711 ("mm: migrate: fix getting incorrect page mapping during page migration")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e95fa7404716f6e25021e66067271a4ad8eb1486 ]
Commit 0952177f2a1f ("thermal/core/power_allocator: Update once
cooling devices when temp is low") adds an update flag to avoid
triggering a thermal event when there is no need, and the thermal
cdev is updated once when the temperature is low.
But when the trips are writable, and switch_on_temp is set to be a
higher value, the cooling device state may not be reset to 0,
because last_temperature is smaller than switch_on_temp.
For example:
First:
switch_on_temp=70 control_temp=85;
Then userspace change the trip_temp:
switch_on_temp=45 control_temp=55 cur_temp=54
Then userspace reset the trip_temp:
switch_on_temp=70 control_temp=85 cur_temp=57 last_temp=54
At this time, the cooling device state should be reset to 0.
However, because cur_temp(57) < switch_on_temp(70)
last_temp(54) < switch_on_temp(70) ----> update = false,
update is false, the cooling device state can not be reset.
Using the observation that tz->passive can also be regarded as the
temperature status, set the update flag to the tz->passive value.
When the temperature drops below switch_on for the first time, the
states of cooling devices can be reset once, and tz->passive is updated
to 0. In the next round, because tz->passive is 0, cdev->state will not
be updated.
By using the tz->passive value as the "update" flag, the issue above
can be solved, and the cooling devices can be updated only once when the
temperature is low.
Fixes: 0952177f2a1f ("thermal/core/power_allocator: Update once cooling devices when temp is low")
Cc: 5.13+ <stable@vger.kernel.org> # 5.13+
Suggested-by: Wei Wang <wvw@google.com>
Signed-off-by: Di Shen <di.shen@unisoc.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c7b4bfadef08cc0995c24a7b9eb120fe897165f ]
Replace the integer trip number stored in struct thermal_instance with
a pointer to the relevant trip and adjust the code using the structure
in question accordingly.
The main reason for making this change is to allow the trip point to
cooling device binding code more straightforward, as illustrated by
subsequent modifications of the ACPI thermal driver, but it also helps
to clarify the overall design and allows the governor code overhead to
be reduced (through subsequent modifications).
The only case in which it adds complexity is trip_point_show() that
needs to walk the trips[] table to find the index of the given trip
point, but this is not a critical path and the interface that
trip_point_show() belongs to is problematic anyway (for instance, it
doesn't cover the case when the same cooling devices is associated
with multiple trip points).
This is a preliminary change and the affected code will be refined by
a series of subsequent modifications of thermal governors, the core and
the ACPI thermal driver.
The general functionality is not expected to be affected by this change.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Stable-dep-of: e95fa7404716 ("thermal: gov_power_allocator: avoid inability to reset a cdev")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a15ffa783ea4210877886c59566a0d20f6b2bc09 ]
It is invalid to call for_each_thermal_trip() on an unregistered thermal
zone anyway, and as per thermal_zone_device_register_with_trips(), the
trips[] table must be present if num_trips is greater than zero for the
given thermal zone.
Hence, the trips check in for_each_thermal_trip() is redundant and so it
can be dropped.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Stable-dep-of: e95fa7404716 ("thermal: gov_power_allocator: avoid inability to reset a cdev")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60fc87a69523c294eb23a1316af922f6665a6f8c ]
The conversion to CCI also converted the multi-byte register access to
big-endian. Correct the register definition by using the correct
little-endian ones.
Fixes: af73323b9770 ("media: imx290: Convert to new CCI register access helpers")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Sakari Ailus: Fixed the Fixes: tag.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d92e7a013ff33f4e0b31bbf768d0c85a8acefebf ]
Some sensors, e.g. Sony IMX290, are using little-endian registers. Add
support for those by encoding the endianness into Bit 20 of the register
address.
Fixes: af73323b9770 ("media: imx290: Convert to new CCI register access helpers")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Sakari Ailus: Fixed commit message.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd93cc245dfe334c38da98c14b34f9597e1b4ea6 ]
Add CCI_REG_WIDTH() macro to obtain register width in bits and similarly,
CCI_REG_WIDTH_BYTES() to obtain it in bytes.
Also add CCI_REG_ADDR() macro to obtain the address of a register.
Use both macros in v4l2-cci.c, too.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Stable-dep-of: d92e7a013ff3 ("media: v4l2-cci: Add support for little-endian encoded registers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eba5058633b4d11e2a4d65eae9f1fce0b96365d9 ]
linux/bits.h is needed for GENMASK(). Include it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Stable-dep-of: d92e7a013ff3 ("media: v4l2-cci: Add support for little-endian encoded registers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e95aada4cb93d42e25c30a0ef9eb2923d9711d4a ]
Commit c73be61cede5 ("pipe: Add general notification queue support") a
regression was introduced that would lock up resized pipes under certain
conditions. See the reproducer in [1].
The commit resizing the pipe ring size was moved to a different
function, doing that moved the wakeup for pipe->wr_wait before actually
raising pipe->max_usage. If a pipe was full before the resize occured it
would result in the wakeup never actually triggering pipe_write.
Set @max_usage and @nr_accounted before waking writers if this isn't a
watch queue.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=212295 [1]
Link: https://lore.kernel.org/r/20231201-orchideen-modewelt-e009de4562c6@brauner
Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reviewed-by: David Howells <dhowells@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Lukas Schauer <lukas@schauer.dev>
[Christian Brauner <brauner@kernel.org>: rewrite to account for watch queues]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4bd6b4bac8edd61eb8f7b836969d12c0c6af165 ]
This declutters the code by reducing the number of #ifdefs and makes
the watch_queue checks simpler. This has no runtime effect; the
machine code is identical.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Message-Id: <20230921075755.1378787-2-max.kellermann@ionos.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: e95aada4cb93 ("pipe: wakeup wr_wait after setting max_usage")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97566d09fd02d2ab329774bb89a2cdf2267e86d9 ]
The kernel allocates a memory buffer and provides its location to the
hardware, which uses it to update the HFI table. This allocation occurs
during boot and remains constant throughout runtime.
When resuming from hibernation, the restore kernel allocates a second
memory buffer and reprograms the HFI hardware with the new location as
part of a normal boot. The location of the second memory buffer may
differ from the one allocated by the image kernel.
When the restore kernel transfers control to the image kernel, its HFI
buffer becomes invalid, potentially leading to memory corruption if the
hardware writes to it (the hardware continues to use the buffer from the
restore kernel).
It is also possible that the hardware "forgets" the address of the memory
buffer when resuming from "deep" suspend. Memory corruption may also occur
in such a scenario.
To prevent the described memory corruption, disable HFI when preparing to
suspend or hibernate. Enable it when resuming.
Add syscore callbacks to handle the package of the boot CPU (packages of
non-boot CPUs are handled via CPU offline). Syscore ops always run on the
boot CPU. Additionally, HFI only needs to be disabled during "deep" suspend
and hibernation. Syscore ops only run in these cases.
Cc: 6.1+ <stable@vger.kernel.org> # 6.1+
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
[ rjw: Comment adjustment, subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c53081d773c2cb4461636559b0d55b46559ceec ]
In preparation to support hibernation, add functionality to disable an HFI
instance during CPU offline. The last CPU of an instance that goes offline
will disable such instance.
The Intel Software Development Manual states that the operating system must
wait for the hardware to set MSR_IA32_PACKAGE_THERM_STATUS[26] after
disabling an HFI instance to ensure that it will no longer write on the HFI
memory. Some processors, however, do not ever set such bit. Wait a minimum
of 2ms to give time hardware to complete any pending memory writes.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 97566d09fd02 ("thermal: intel: hfi: Add syscore callbacks for system-wide PM")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a8b6bb93c704776c4b05cb517c3fa8baffb72f5 ]
In preparation for the addition of a suspend notifier, wrap the logic to
enable HFI and program its memory buffer into helper functions. Both the
CPU hotplug callback and the suspend notifier will use them.
This refactoring does not introduce functional changes.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 97566d09fd02 ("thermal: intel: hfi: Add syscore callbacks for system-wide PM")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9c1292eca243821249fa99f40175b0660d9329e3 upstream.
It was reported that there is a compiler warning on the unused variable
"sin_addr_len" in af_inet.c when CONFIG_CGROUP_BPF is not set.
This patch is to address it similar to the ipv6 counterpart
in inet6_getname(). It is to "return sin_addr_len;"
instead of "return sizeof(*sin);".
Fixes: fefba7d1ae19 ("bpf: Propagate modified uaddrlen from cgroup sockaddr programs")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/bpf/20231013185702.3993710-1-martin.lau@linux.dev
Closes: https://lore.kernel.org/bpf/20231013114007.2fb09691@canb.auug.org.au/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca1ffb174f16b699c536734fc12a4162097c49f4 upstream.
The power source flag should be updated when
[1] System receives an interrupt indicating that the power source
has changed.
[2] System resumes from suspend or runtime suspend
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bfe79f5fff1300d96203383582b078c7b0aec80a upstream.
[Why]
For usb4 connector, AUX transaction is handled by dmub utilizing a differnt
code path comparing to legacy DP connector. If the usb4 DP connector is
disconnected, AUX access will report EBUSY and cause igt@kms_dp_aux_dev
fail.
[How]
Align the error code with the one reported by legacy DP as EIO.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4b56f7d47be87cde5f368b67bc7fac53a2c3e8d2 upstream.
[Why]
We can experience DENTIST hangs during optimize_bandwidth or TDRs if
FIFO is toggled and hangs.
[How]
Port the DCN35 fixes to DCN314.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4a94dbb6dc0bed10a5fc63718d00f1de45b12c0 upstream.
Correct the algorithm of active CU to skip disabled
sa for gfx v11.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 28d3d0696688154cc04983f343011d07bf0508e4 upstream.
The i2c_master_send/recv() functions return negative error codes or
they return "len" on success. So the error handling here can be written
as just normal checks for "if (ret < 0) return ret;". No need to
complicate things.
Btw, in this code the "len" parameter can never be zero, but even if
it were, then I feel like this would still be the best way to write it.
Fixes: 914437992876 ("drm/bridge: nxp-ptn3460: fix i2c_master_send() error checking")
Suggested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/04242630-42d8-4920-8c67-24ac9db6b3c9@moroto.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 571c2fa26aa654946447c282a09d40a56c7ff128 upstream.
When screen brightness is rapidly changed and PSR-SU is enabled the
display hangs on panels with this TCON even on the latest DCN 3.1.4
microcode (0x8002a81 at this time).
This was disabled previously as commit 072030b17830 ("drm/amd: Disable
PSR-SU on Parade 0803 TCON") but reverted as commit 1e66a17ce546 ("Revert
"drm/amd: Disable PSR-SU on Parade 0803 TCON"") in favor of testing for
a new enough microcode (commit cd2e31a9ab93 ("drm/amd/display: Set minimum
requirement for using PSR-SU on Phoenix")).
As hangs are still happening specifically with this TCON, disable PSR-SU
again for it until it can be root caused.
Cc: stable@vger.kernel.org
Cc: aaron.ma@canonical.com
Cc: binli@gnome.org
Cc: Marc Rossi <Marc.Rossi@amd.com>
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2046131
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3a0fa3bc245ef92838a8296e0055569b8dff94c4 upstream.
IGT `amdgpu/amd_color/crtc-lut-accuracy` fails right at the beginning of
the test execution, during atomic check, because DC rejects the
bandwidth state for a fb sizing 64x64. The test was previously working
with the deprecated dc_commit_state(). Now using
dc_validate_with_context() approach, the atomic check needs to perform a
full state validation. Therefore, set fast_validation to false in the
dc_validate_global_state call for atomic check.
Cc: stable@vger.kernel.org
Fixes: b8272241ff9d ("drm/amd/display: Drop dc_commit_state in favor of dc_commit_streams")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 35ed38d58257336c1df26b14fd5110b026e2adde upstream.
It allows drivers to set a struct drm_plane_state .ignore_damage_clips in
their plane's .atomic_check callback, as an indication to damage helpers
such as drm_atomic_helper_damage_iter_init() that the damage clips should
be ignored.
To be used by drivers that do per-buffer (e.g: virtio-gpu) uploads (rather
than per-plane uploads), since these type of drivers need to handle buffer
damages instead of frame damages.
That way, these drivers could force a full plane update if the framebuffer
attached to a plane's state has changed since the last update (page-flip).
Fixes: 01f05940a9a7 ("drm/virtio: Enable fb damage clips property for the primary plane")
Cc: <stable@vger.kernel.org> # v6.4+
Reported-by: nerdopolis <bluescreen_avenger@verizon.net>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218115
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Acked-by: Sima Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20231123221315.3579454-2-javierm@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0240db231dfe5ee5b7a3a03cba96f0844b7a673d upstream.
The driver does per-buffer uploads and needs to force a full plane update
if the plane's attached framebuffer has change since the last page-flip.
Fixes: 01f05940a9a7 ("drm/virtio: Enable fb damage clips property for the primary plane")
Cc: <stable@vger.kernel.org> # v6.4+
Reported-by: nerdopolis <bluescreen_avenger@verizon.net>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218115
Suggested-by: Sima Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Acked-by: Sima Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20231123221315.3579454-3-javierm@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4e3b70da64a53784683cfcbac2deda5d6e540407 upstream.
Cursor planes on virtualized drivers have special meaning and require
that the clients handle them in specific ways, e.g. the cursor plane
should react to the mouse movement the way a mouse cursor would be
expected to and the client is required to set hotspot properties on it
in order for the mouse events to be routed correctly.
This breaks the contract as specified by the "universal planes". Fix it
by disabling the cursor planes on virtualized drivers while adding
a foundation on top of which it's possible to special case mouse cursor
planes for clients that want it.
Disabling the cursor planes makes some kms compositors which were broken,
e.g. Weston, fallback to software cursor which works fine or at least
better than currently while having no effect on others, e.g. gnome-shell
or kwin, which put virtualized drivers on a deny-list when running in
atomic context to make them fallback to legacy kms and avoid this issue.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 681e7ec73044 ("drm: Allow userspace to ask for universal plane list (v2)")
Cc: <stable@vger.kernel.org> # v5.4+
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Gurchetan Singh <gurchetansingh@chromium.org>
Cc: Chia-I Wu <olvaffe@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: virtualization@lists.linux-foundation.org
Cc: spice-devel@lists.freedesktop.org
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231023074613.41327-2-aesteve@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 95d4b471953411854f9c80b568da7fcf753f3801 upstream.
tidss_crtc_atomic_flush() checks if the crtc is enabled, and if not,
returns immediately as there's no reason to do any register changes.
However, the code checks for 'crtc->state->enable', which does not
reflect the actual HW state. We should instead look at the
'crtc->state->active' flag.
This causes the tidss_crtc_atomic_flush() to proceed with the flush even
if the active state is false, which then causes us to hit the
WARN_ON(!crtc->state->event) check.
Fix this by checking the active flag, and while at it, fix the related
debug print which had "active" and "needs modeset" wrong way.
Cc: <stable@vger.kernel.org>
Fixes: 32a1795f57ee ("drm/tidss: New driver for TI Keystone platform Display SubSystem")
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20231109-tidss-probe-v2-10-ac91b5ea35c0@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9cf5ca1f485cae406968947a92bf304603999fa1 upstream.
Non-KMS drivers have been removed from DRM. Update the TODO list
accordingly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: a276afc19eec ("drm: Remove some obsolete drm pciids(tdfx, mga, i810, savage, r128, sis, via)")
Cc: Cai Huoqing <cai.huoqing@linux.dev>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.3+
Cc: linux-doc@vger.kernel.org
Reviewed-by: David Airlie <airlied@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-3-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 914437992876838662c968cb416f832110fb1093 upstream.
The i2c_master_send/recv() functions return negative error codes or the
number of bytes that were able to be sent/received. This code has
two problems. 1) Instead of checking if all the bytes were sent or
received, it checks that at least one byte was sent or received.
2) If there was a partial send/receive then we should return a negative
error code but this code returns success.
Fixes: a9fe713d7d45 ("drm/bridge: Add PTN3460 bridge driver")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/0cdc2dce-ca89-451a-9774-1482ab2f4762@moroto.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cb4daf271302d71a6b9a7c01bd0b6d76febd8f0c upstream.
If we get a deadlock after the fb lookup in drm_mode_page_flip_ioctl()
we proceed to unref the fb and then retry the whole thing from the top.
But we forget to reset the fb pointer back to NULL, and so if we then
get another error during the retry, before the fb lookup, we proceed
the unref the same fb again without having gotten another reference.
The end result is that the fb will (eventually) end up being freed
while it's still in use.
Reset fb to NULL once we've unreffed it to avoid doing it again
until we've done another fb lookup.
This turned out to be pretty easy to hit on a DG2 when doing async
flips (and CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y). The first symptom I
saw that drm_closefb() simply got stuck in a busy loop while walking
the framebuffer list. Fortunately I was able to convince it to oops
instead, and from there it was easier to track down the culprit.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211081625.25704-1-ville.syrjala@linux.intel.com
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6992eb815d087858f8d7e4020529c2fe800456b3 upstream.
This reverts commit 88b065943cb583e890324d618e8d4b23460d51a3.
Lenovo 82TQ is unhappy if we do the display on sequence this
late. The display output shows severe corruption.
It's unclear if this is a failure on our part (perhaps
something to do with sending commands in LP mode after HS
/video mode transmission has been started? Though the backlight
on command at least seems to work) or simply that there are
some commands in the sequence that are needed to be done
earlier (eg. could be some DSC init stuff?). If the latter
then I don't think the current Windows code would work
either, but maybe this was originally tested with an older
driver, who knows.
Root causing this fully would likely require a lot of
experimentation which isn't really feasible without direct
access to the machine, so let's just accept failure and
go back to the original sequence.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10071
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240116210821.30194-1-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit dc524d05974f615b145404191fcf91b478950499)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 192cdb1c907fd8df2d764c5bb17496e415e59391 upstream.
On systems using HWP, if a given frequency is equal to the maximum turbo
frequency or the maximum non-turbo frequency, the HWP performance level
corresponding to it is already known and can be used directly without
any computation.
Accordingly, adjust the code to use the known HWP performance levels in
the cases mentioned above.
This also helps to avoid limiting CPU capacity artificially in some
cases when the BIOS produces the HWP_CAP numbers using a different
E-core-to-P-core performance scaling factor than expected by the kernel.
Fixes: f5c8cf2a4992 ("cpufreq: intel_pstate: hybrid: Use known scaling factor for P-cores")
Cc: 6.1+ <stable@vger.kernel.org> # 6.1+
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 805c74eac8cb306dc69b87b6b066ab4da77ceaf1 upstream.
Spurious wakeups are reported on the GPD G1619-04 which
can be absolved by programming the GPIO to ignore wakeups.
Cc: stable@vger.kernel.org
Reported-and-tested-by: George Melikov <mail@gmelikov.ru>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3073
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d8d222e09dab84a17bb65dda4b94d01c565f5327 upstream.
Recently xfs/513 started failing on my test machines testing "-o
ro,norecovery" mount options. This was being emitted in dmesg:
[ 9906.932724] XFS (pmem0): no-recovery mounts must be read-only.
Turns out, readonly mounts with the fsopen()/fsconfig() mount API
have been busted since day zero. It's only taken 5 years for debian
unstable to start using this "new" mount API, and shortly after this
I noticed xfs/513 had started to fail as per above.
The syscall trace is:
fsopen("xfs", FSOPEN_CLOEXEC) = 3
mount_setattr(-1, NULL, 0, NULL, 0) = -1 EINVAL (Invalid argument)
.....
fsconfig(3, FSCONFIG_SET_STRING, "source", "/dev/pmem0", 0) = 0
fsconfig(3, FSCONFIG_SET_FLAG, "ro", NULL, 0) = 0
fsconfig(3, FSCONFIG_SET_FLAG, "norecovery", NULL, 0) = 0
fsconfig(3, FSCONFIG_CMD_CREATE, NULL, NULL, 0) = -1 EINVAL (Invalid argument)
close(3) = 0
Showing that the actual mount instantiation (FSCONFIG_CMD_CREATE) is
what threw out the error.
During mount instantiation, we call xfs_fs_validate_params() which
does:
/* No recovery flag requires a read-only mount */
if (xfs_has_norecovery(mp) && !xfs_is_readonly(mp)) {
xfs_warn(mp, "no-recovery mounts must be read-only.");
return -EINVAL;
}
and xfs_is_readonly() checks internal mount flags for read only
state. This state is set in xfs_init_fs_context() from the
context superblock flag state:
/*
* Copy binary VFS mount flags we are interested in.
*/
if (fc->sb_flags & SB_RDONLY)
set_bit(XFS_OPSTATE_READONLY, &mp->m_opstate);
With the old mount API, all of the VFS specific superblock flags
had already been parsed and set before xfs_init_fs_context() is
called, so this all works fine.
However, in the brave new fsopen/fsconfig world,
xfs_init_fs_context() is called from fsopen() context, before any
VFS superblock have been set or parsed. Hence if we use fsopen(),
the internal XFS readonly state is *never set*. Hence anything that
depends on xfs_is_readonly() actually returning true for read only
mounts is broken if fsopen() has been used to mount the filesystem.
Fix this by moving this internal state initialisation to
xfs_fs_fill_super() before we attempt to validate the parameters
that have been set prior to the FSCONFIG_CMD_CREATE call being made.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Fixes: 73e5fff98b64 ("xfs: switch to use the new mount-api")
cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bc03c02cc1991a066b23e69bbcc0f66e8f1f7453 upstream.
If the RLC firmware is invalid because of wrong header size,
the pointer to the rlc firmware is released in function
amdgpu_ucode_request. There will be a null pointer error
in subsequent use. So skip validation to fix it.
Fixes: 3da9b71563cb ("drm/amd: Use `amdgpu_ucode_*` helpers for GFX10")
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d1b163aa0749706379055e40a52cf7a851abf9dc upstream.
This reverts commit 60aebc9559492cea6a9625f514a8041717e3a2e4.
Commit 60aebc9559492cea ("drivers/firmware: Move sysfb_init() from
device_initcall to subsys_initcall_sync") messes up initialization order
of the graphics drivers and leads to blank displays on some systems. So
revert the commit.
To make the display drivers fully independent from initialization
order requires to track framebuffer memory by device and independently
from the loaded drivers. The kernel currently lacks the infrastructure
to do so.
Reported-by: Jaak Ristioja <jaak@ristioja.ee>
Closes: https://lore.kernel.org/dri-devel/ZUnNi3q3yB3zZfTl@P70.localdomain/T/#t
Reported-by: Huacai Chen <chenhuacai@loongson.cn>
Closes: https://lore.kernel.org/dri-devel/20231108024613.2898921-1-chenhuacai@loongson.cn/
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10133
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: stable@vger.kernel.org # v6.5+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240123120937.27736-1-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 437a310b22244d4e0b78665c3042e5d1c0f45306 upstream.
On reception of a completion interrupt the shared memory area is accessed
to retrieve the message header at first and then, if the message sequence
number identifies a transaction which is still pending, the related
payload is fetched too.
When an SCMI command times out the channel ownership remains with the
platform until eventually a late reply is received and, as a consequence,
any further transmission attempt remains pending, waiting for the channel
to be relinquished by the platform.
Once that late reply is received the channel ownership is given back
to the agent and any pending request is then allowed to proceed and
overwrite the SMT area of the just delivered late reply; then the wait
for the reply to the new request starts.
It has been observed that the spurious IRQ related to the late reply can
be wrongly associated with the freshly enqueued request: when that happens
the SCMI stack in-flight lookup procedure is fooled by the fact that the
message header now present in the SMT area is related to the new pending
transaction, even though the real reply has still to arrive.
This race-condition on the A2P channel can be detected by looking at the
channel status bits: a genuine reply from the platform will have set the
channel free bit before triggering the completion IRQ.
Add a consistency check to validate such condition in the A2P ISR.
Reported-by: Xinglong Yang <xinglong.yang@cixtech.com>
Closes: https://lore.kernel.org/all/PUZPR06MB54981E6FA00D82BFDBB864FBF08DA@PUZPR06MB5498.apcprd06.prod.outlook.com/
Fixes: 5c8a47a5a91d ("firmware: arm_scmi: Make scmi core independent of the transport type")
Cc: stable@vger.kernel.org # 5.15+
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Xinglong Yang <xinglong.yang@cixtech.com>
Link: https://lore.kernel.org/r/20231220172112.763539-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5913320eb0b3ec88158cfcb0fa5e996bf4ef681b upstream.
p2sb_bar() unhides P2SB device to get resources from the device. It
guards the operation by locking pci_rescan_remove_lock so that parallel
rescans do not find the P2SB device. However, this lock causes deadlock
when PCI bus rescan is triggered by /sys/bus/pci/rescan. The rescan
locks pci_rescan_remove_lock and probes PCI devices. When PCI devices
call p2sb_bar() during probe, it locks pci_rescan_remove_lock again.
Hence the deadlock.
To avoid the deadlock, do not lock pci_rescan_remove_lock in p2sb_bar().
Instead, do the lock at fs_initcall. Introduce p2sb_cache_resources()
for fs_initcall which gets and caches the P2SB resources. At p2sb_bar(),
refer the cache and return to the caller.
Before operating the device at P2SB DEVFN for resource cache, check
that its device class is PCI_CLASS_MEMORY_OTHER 0x0580 that PCH
specifications define. This avoids unexpected operation to other devices
at the same DEVFN.
Link: https://lore.kernel.org/linux-pci/6xb24fjmptxxn5js2fjrrddjae6twex5bjaftwqsuawuqqqydx@7cl3uik5ef6j/
Fixes: 9745fb07474f ("platform/x86/intel: Add Primary to Sideband (P2SB) bridge support")
Cc: stable@vger.kernel.org
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20240108062059.3583028-2-shinichiro.kawasaki@wdc.com
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by Klara Modin <klarasmodin@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 416de0246f35f43d871a57939671fe814f4455ee upstream.
When booting a kernel with CONFIG_CFI_CLANG, there is a CFI failure when
accessing any of the values under
/sys/devices/system/cpu/intel_uncore_frequency/package_00_die_00:
$ cat /sys/devices/system/cpu/intel_uncore_frequency/package_00_die_00/max_freq_khz
fish: Job 1, 'cat /sys/devices/system/cpu/int…' terminated by signal SIGSEGV (Address boundary error)
$ sudo dmesg &| grep 'CFI failure'
[ 170.953925] CFI failure at kobj_attr_show+0x19/0x30 (target: show_max_freq_khz+0x0/0xc0 [intel_uncore_frequency_common]; expected type: 0xd34078c5
The sysfs callback functions such as show_domain_id() are written as if
they are going to be called by dev_attr_show() but as the above message
shows, they are instead called by kobj_attr_show(). kCFI checks that the
destination of an indirect jump has the exact same type as the prototype
of the function pointer it is called through and fails when they do not.
These callbacks are called through kobj_attr_show() because
uncore_root_kobj was initialized with kobject_create_and_add(), which
means uncore_root_kobj has a ->sysfs_ops of kobj_sysfs_ops from
kobject_create(), which uses kobj_attr_show() as its ->show() value.
The only reason there has not been a more noticeable problem until this
point is that 'struct kobj_attribute' and 'struct device_attribute' have
the same layout, so getting the callback from container_of() works the
same with either value.
Change all the callbacks and their uses to be compatible with
kobj_attr_show() and kobj_attr_store(), which resolves the kCFI failure
and allows the sysfs files to work properly.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1974
Fixes: ae7b2ce57851 ("platform/x86/intel/uncore-freq: Use sysfs API to create attributes")
Cc: stable@vger.kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20240104-intel-uncore-freq-kcfi-fix-v1-1-bf1e8939af40@kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f342de4e2f33e0e39165d8639387aa6c19dff660 upstream.
This reverts commit e0abdadcc6e1.
core.c:nf_hook_slow assumes that the upper 16 bits of NF_DROP
verdicts contain a valid errno, i.e. -EPERM, -EHOSTUNREACH or similar,
or 0.
Due to the reverted commit, its possible to provide a positive
value, e.g. NF_ACCEPT (1), which results in use-after-free.
Its not clear to me why this commit was made.
NF_QUEUE is not used by nftables; "queue" rules in nftables
will result in use of "nft_queue" expression.
If we later need to allow specifiying errno values from userspace
(do not know why), this has to call NF_DROP_GETERR and check that
"err <= 0" holds true.
Fixes: e0abdadcc6e1 ("netfilter: nf_tables: accept QUEUE/DROP verdict parameters")
Cc: stable@vger.kernel.org
Reported-by: Notselwyn <notselwyn@pwning.tech>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 01acb2e8666a6529697141a6017edbf206921913 upstream.
Remove netdevice from inet/ingress basechain in case NETDEV_UNREGISTER
event is reported, otherwise a stale reference to netdevice remains in
the hook list.
Fixes: 60a3815da702 ("netfilter: add inet ingress support")
Cc: stable@vger.kernel.org
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
