IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
As ntb_register_device() don't handle error of device_register(),
if ntb_register_device() returns error in pci_vntb_probe(), name of kobject
which is allocated in dev_set_name() called in device_add() is leaked.
As comment of device_add() says, it should call put_device() to drop the
reference count that was set in device_initialize()
when it fails, so the name can be freed in kobject_cleanup().
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
New support:
- TI J721S2 CSI BCDMA support
Updates:
- Native HDMI support for dw edma driver
- ste dma40 updates for supporting proper SRAM handle in DT
- removal of dma device chancnt setting in drivers
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmSmXBgACgkQfBQHDyUj
g0cI0Q/8DcHi1Hn6rRIzeKyZIhttG/fDW7DcroTeHoJROCkjMi1vV/B7gkSqQxgD
KxciVPtaOeMPSSf6rrWAmVmE8DiPhODHisaUt4vKaNAjyRlfv2lyqRnCcZ9F5Y+C
V/spkSEkaC0AZ4FcXM8GMYFc4erS23J6fi56vH39jJvR6LrIP6g7RpOck50Ep2WX
wqEXuMSo7tRwa7sPKDqh4c03NLQRMf9HSzH7g1bAOrtGRmdmA4go1Mi7o3KpnjMO
epnTraE2UHoLFdEz/qWOly6r7hn0W1+0B21NmZLMR+AWGFNXRJKltkA7EsiYydE6
v6XeSHvdlSK7FUEEBfkzp/sjsok7H9xXPMnJZfsiZ899fKBwZ5uuvf+Fp5ashYj5
xLPbWH5UHUXMzLTvLotySpxkLBThE8jlnSLM7CzThnrDOJMlYTpCtCW37rLugUGy
fB5HfPAx74nftheV39dxfTPJvMjWf5CYVnaQiiGiinZgUbuMvTyxXguKsBQeMTFc
ExmE4KuAUcjmPX6sG9rVcNsC+aBmKEM9rDoFHEH/sz7sY3Wth1qKihwzkkfmT7I2
/O8tyJ6NCt2cWEiJDUG8jElv40y7rPoHLe74EbcomBug8hYlG9862/jd0hIbX1op
MWj3i1pJ9P7l5vWDRjmfNcQibwaa2F/iRZJJobsmqf7mrSB5cxY=
=pGmA
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New support:
- TI J721S2 CSI BCDMA support
Updates:
- Native HDMI support for dw edma driver
- ste dma40 updates for supporting proper SRAM handle in DT
- removal of dma device chancnt setting in drivers"
* tag 'dmaengine-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (28 commits)
dmaengine: sprd: Don't set chancnt
dmaengine: hidma: Don't set chancnt
dmaengine: plx_dma: Don't set chancnt
dmaengine: axi-dmac: Don't set chancnt
dmaengine: dw-axi-dmac: Don't set chancnt
dmaengine: qcom: bam_dma: allow omitting num-{channels,ees}
dmaengine: dw-edma: Add HDMA DebugFS support
dmaengine: dw-edma: Add support for native HDMA
dmaengine: dw-edma: Create a new dw_edma_core_ops structure to abstract controller operation
dmaengine: dw-edma: Rename dw_edma_core_ops structure to dw_edma_plat_ops
dmaengine: ste_dma40: use proper format string for resource_size_t
dmaengine: make QCOM_HIDMA depend on HAS_IOMEM
dmaengine: ste_dma40: fix typo in enum documentation
dmaengine: ste_dma40: use correct print specfier for resource_size_t
MAINTAINERS: Add myself as the DW eDMA driver reviewer
MAINTAINERS: Add Manivannan to DW eDMA driver maintainers list
MAINTAINERS: Demote Gustavo Pimentel to DW EDMA driver reviewer
dmaengine: ti: k3-udma: Add support for J721S2 CSI BCDMA instance
dt-bindings: dma: ti: Add J721S2 BCDMA
dmaengine: ti: k3-psil-j721s2: Add PSI-L thread map for main CPSW2G
...
-----BEGIN PGP SIGNATURE-----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=xpTd
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Export pcie_retrain_link() for use outside ASPM
- Add Data Link Layer Link Active Reporting as another way for
pcie_retrain_link() to determine the link is up
- Work around link training failures (especially on the ASMedia
ASM2824 switch) by training first at 2.5GT/s and then attempting
higher rates
Resource management:
- When we coalesce host bridge windows, remove invalidated resources
from the resource tree so future allocations work correctly
Hotplug:
- Cancel bringup sequence if card is not present, to keep from
blinking Power Indicator indefinitely
- Reassign bridge resources if necessary for ACPI hotplug
Driver binding:
- Convert platform_device .remove() callbacks to return void instead
of a mostly useless int
Power management:
- Reduce wait time for secondary bus to be ready to speed up resume
- Avoid putting EloPOS E2/S2/H2 (as well as Elo i2) PCIe Ports in
D3cold
- Call _REG when transitioning D-states so AML that uses the PCI
config space OpRegion works, which fixes some ASMedia GPIO
controllers after resume
Virtualization:
- Delay extra 250ms after FLR of Solidigm P44 Pro NVMe to avoid KVM
hang when guest is rebooted
- Add function 1 DMA alias quirk for Marvell 88SE9235
Error handling:
- Unexport pci_save_aer_state() since it's only used in drivers/pci/
- Drop recommendation for drivers to configure AER Capability, since
the PCI core does this for all devices
ASPM:
- Disable ASPM on MFD function removal to avoid use-after-free
- Tighten up pci_enable_link_state() and pci_disable_link_state()
interfaces so they don't enable/disable states the driver didn't
specify
- Avoid link retraining race that can happen if ASPM sets link
control parameters while the link is in the midst of training for
some other reason
Endpoint framework:
- Change "PCI Endpoint Virtual NTB driver" Kconfig prompt to be
different from "PCI Endpoint NTB driver"
- Automatically create a function specific attributes group for
endpoint drivers to avoid reference counting issues
- Fix many EPC test issues
- Return pci_epf_type_add_cfs() error if EPF has no driver
- Add kernel-doc for pci_epc_raise_irq() and pci_epc_map_msi_irq()
MSI vector parameters
- Pass EPF device ID to driver probe functions
- Return -EALREADY if EPC has already been started/stopped
- Add linkdown notifier support and use it in qcom-ep
- Add Bus Master Enable event support and use it in qcom-ep
- Add Qualcomm Modem Host Interface (MHI) endpoint driver
- Add Layerscape PME interrupt handling to manage link-up
notification
Cadence PCIe controller driver:
- Wait for link retrain to complete when working around the J721E
i2085 erratum with Gen2 mode
Faraday FTPC100 PCI controller driver:
- Release clock resources on error paths
Freescale i.MX6 PCIe controller driver:
- Save and restore Root Port MSI control to work around hardware defect
Intel VMD host bridge driver:
- Reset VMD config register between soft reboots
- Capture pci_reset_bus() return value instead of printing junk when
it fails
Qualcomm PCIe controller driver:
- Add SDX65 endpoint compatible string to DT binding
- Disable register write access after init for IP v2.3.3, v2.9.0
- Use DWC helpers for enabling/disabling writes to DBI registers
- Hide slot hotplug capability for IP v1.0.0, v1.9.0, v2.1.0, v2.3.2,
v2.3.3, v2.7.0, v2.9.0
- Reuse v2.3.2 post-init sequence for v2.4.0
Renesas R-Car PCIe controller driver:
- Remove unused static pcie_base and pcie_dev
Rockchip PCIe controller driver:
- Remove writes to unused registers
- Write endpoint Device ID using correct register
- Assert PCI Configuration Enable bit after probe so endpoint
responds instead of generating Request Retry Status messages
- Poll waiting for PHY PLLs to lock
- Update RK3399 example DT binding to be valid
- Use RK3399 PCIE_CLIENT_LEGACY_INT_CTRL to generate INTx instead of
manually generating PCIe message
- Use multiple windows to avoid address translation conflicts
- Use u32 (not u16) when accessing 32-bit registers
- Hide MSI-X Capability, since RK3399 can't generate MSI-X
- Set endpoint controller required alignment to 256
Synopsys DesignWare PCIe controller driver:
- Wait for link to come up only if we've initiated link training
Miscellaneous:
- Add pci_clear_master() stub for non-CONFIG_PCI"
* tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
Documentation: PCI: correct spelling
PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain()
PCI: xgene-msi: Convert to platform remove callback returning void
PCI: tegra: Convert to platform remove callback returning void
PCI: rockchip-host: Convert to platform remove callback returning void
PCI: mvebu: Convert to platform remove callback returning void
PCI: mt7621: Convert to platform remove callback returning void
PCI: mediatek-gen3: Convert to platform remove callback returning void
PCI: mediatek: Convert to platform remove callback returning void
PCI: iproc: Convert to platform remove callback returning void
PCI: hisi-error: Convert to platform remove callback returning void
PCI: dwc: Convert to platform remove callback returning void
PCI: j721e: Convert to platform remove callback returning void
PCI: brcmstb: Convert to platform remove callback returning void
PCI: altera-msi: Convert to platform remove callback returning void
PCI: altera: Convert to platform remove callback returning void
PCI: aardvark: Convert to platform remove callback returning void
PCI: rcar: Use correct product family name for Renesas R-Car
PCI: layerscape: Add the endpoint linkup notifier support
PCI: endpoint: pci-epf-vntb: Fix typo in comments
...
Nothing surprising in the SoC specific drivers, with the usual updates:
* Added or improved SoC driver support for Tegra234, Exynos4121, RK3588,
as well as multiple Mediatek and Qualcomm chips
* SCMI firmware gains support for multiple SMC/HVC transport and version
3.2 of the protocol
* Cleanups amd minor changes for the reset controller, memory controller,
firmware and sram drivers
* Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
amlogic and renesas SoC specific drivers
-----BEGIN PGP SIGNATURE-----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=zvLr
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Nothing surprising in the SoC specific drivers, with the usual
updates:
- Added or improved SoC driver support for Tegra234, Exynos4121,
RK3588, as well as multiple Mediatek and Qualcomm chips
- SCMI firmware gains support for multiple SMC/HVC transport and
version 3.2 of the protocol
- Cleanups amd minor changes for the reset controller, memory
controller, firmware and sram drivers
- Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
amlogic and renesas SoC specific drivers"
* tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (118 commits)
dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
MAINTAINERS: add PHY-related files to Amlogic SoC file list
drivers: meson: secure-pwrc: always enable DMA domain
tee: optee: Use kmemdup() to replace kmalloc + memcpy
soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer
dt-bindings: sram: qcom,imem: document qdu1000
soc: qcom: icc-bwmon: Fix MSM8998 count unit
dt-bindings: soc: qcom,rpmh-rsc: Require power-domains
soc: qcom: socinfo: Add Soc ID for IPQ5300
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300
soc: qcom: Fix a IS_ERR() vs NULL bug in probe
soc: qcom: socinfo: Add support for new fields in revision 19
soc: qcom: socinfo: Add support for new fields in revision 18
dt-bindings: firmware: scm: Add compatible for SDX75
soc: qcom: mdt_loader: Fix split image detection
dt-bindings: memory-controllers: drop unneeded quotes
soc: rockchip: dtpm: use C99 array init syntax
firmware: tegra: bpmp: Add support for DRAM MRQ GSCs
soc/tegra: pmc: Use devm_clk_notifier_register()
soc/tegra: pmc: Simplify debugfs initialization
...
- Yosry has also eliminated cgroup's atomic rstat flushing.
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability.
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning.
- Lorenzo Stoakes has done some maintanance work on the get_user_pages()
interface.
- Liam Howlett continues with cleanups and maintenance work to the maple
tree code. Peng Zhang also does some work on maple tree.
- Johannes Weiner has done some cleanup work on the compaction code.
- David Hildenbrand has contributed additional selftests for
get_user_pages().
- Thomas Gleixner has contributed some maintenance and optimization work
for the vmalloc code.
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code.
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting.
- Christoph Hellwig has some cleanups for the filemap/directio code.
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the provided
APIs rather than open-coding accesses.
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings.
- John Hubbard has a series of fixes to the MM selftesting code.
- ZhangPeng continues the folio conversion campaign.
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock.
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment from
128 to 8.
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management.
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code.
- Vishal Moola also has done some folio conversion work.
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZJejewAKCRDdBJ7gKXxA
joggAPwKMfT9lvDBEUnJagY7dbDPky1cSYZdJKxxM2cApGa42gEA6Cl8HRAWqSOh
J0qXCzqaaN8+BuEyLGDVPaXur9KirwY=
=B7yQ
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
- Yosry Ahmed brought back some cgroup v1 stats in OOM logs
- Yosry has also eliminated cgroup's atomic rstat flushing
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning
- Lorenzo Stoakes has done some maintanance work on the
get_user_pages() interface
- Liam Howlett continues with cleanups and maintenance work to the
maple tree code. Peng Zhang also does some work on maple tree
- Johannes Weiner has done some cleanup work on the compaction code
- David Hildenbrand has contributed additional selftests for
get_user_pages()
- Thomas Gleixner has contributed some maintenance and optimization
work for the vmalloc code
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting
- Christoph Hellwig has some cleanups for the filemap/directio code
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the
provided APIs rather than open-coding accesses
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings
- John Hubbard has a series of fixes to the MM selftesting code
- ZhangPeng continues the folio conversion campaign
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
from 128 to 8
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code
- Vishal Moola also has done some folio conversion work
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch
* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
mm/hugetlb: remove hugetlb_set_page_subpool()
mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
hugetlb: revert use of page_cache_next_miss()
Revert "page cache: fix page_cache_next/prev_miss off by one"
mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
mm: memcg: rename and document global_reclaim()
mm: kill [add|del]_page_to_lru_list()
mm: compaction: convert to use a folio in isolate_migratepages_block()
mm: zswap: fix double invalidate with exclusive loads
mm: remove unnecessary pagevec includes
mm: remove references to pagevec
mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
mm: remove struct pagevec
net: convert sunrpc from pagevec to folio_batch
i915: convert i915_gpu_error to use a folio_batch
pagevec: rename fbatch_count()
mm: remove check_move_unevictable_pages()
drm: convert drm_gem_put_pages() to use a folio_batch
i915: convert shmem_sg_free_table() to use a folio_batch
scatterlist: add sg_set_folio()
...
- Change "PCI Endpoint Virtual NTB driver" Kconfig prompt to be different
from "PCI Endpoint NTB driver" (Shunsuke Mie)
- Automatically create a function specific attributes group for endpoint
drivers to avoid reference counting issues (Damien Le Moal)
- Move and unexport pci_epf_type_add_cfs() (Damien Le Moal)
- Reinitialize EPF test DMA transfer completion before submitting it to
avoid losing the completion notification (Damien Le Moal)
- Fix EPF test DMA transfer completion detection (Damien Le Moal)
- Submit EPF test DMA transfers with dmaengine_submit(), not tx_submit()
(Damien Le Moal)
- Simplify EPF test read/write/copy functions (Damien Le Moal)
- Simplify EPF test "raise IRQ" interface (Damien Le Moal)
- Simplify EPF test IRQ command execution (Damien Le Moal)
- Improve EPF test command/status register handling (Damien Le Moal)
- Free IRQs before removing device (Damien Le Moal)
- Reinitialize IRQ completions for every test (Damien Le Moal)
- Don't write status in IRQ handler to avoid race (Damien Le Moal)
- Fix dma_chan direction in data transfer test (Yoshihiro Shimoda)
- Return pci_epf_type_add_cfs() error if EPF has no driver (Damien Le Moal)
- Add kernel-doc for pci_epc_raise_irq() and pci_epc_map_msi_irq() MSI
vector parameters (Manivannan Sadhasivam)
- Pass EPF device ID to driver probe functions (Manivannan Sadhasivam)
- Return -EALREADY if EPC has already been started/stopped (Manivannan
Sadhasivam)
- Add linkdown notifier support and use it in qcom-ep (Manivannan
Sadhasivam)
- Add Bus Master Enable event support and use it in qcom-ep (Manivannan
Sadhasivam)
- Add Qualcomm Modem Host Interface (MHI) endpoint driver (Manivannan
Sadhasivam)
- Add Layerscape PME interrupt handling to manage link-up notification
(Frank Li)
* pci/controller/endpoint:
PCI: layerscape: Add the endpoint linkup notifier support
PCI: endpoint: pci-epf-vntb: Fix typo in comments
MAINTAINERS: Add PCI MHI endpoint function driver under MHI bus
PCI: endpoint: Add PCI Endpoint function driver for MHI bus
PCI: qcom-ep: Add support for BME notification
PCI: qcom-ep: Add support for Link down notification
PCI: endpoint: Add BME notifier support
PCI: endpoint: Add linkdown notifier support
PCI: endpoint: Return error if EPC is started/stopped multiple times
PCI: endpoint: Pass EPF device ID to the probe function
PCI: endpoint: Add missing documentation about the MSI/MSI-X range
PCI: endpoint: Improve pci_epf_type_add_cfs()
PCI: endpoint: functions/pci-epf-test: Fix dma_chan direction
misc: pci_endpoint_test: Simplify pci_endpoint_test_msi_irq()
misc: pci_endpoint_test: Do not write status in IRQ handler
misc: pci_endpoint_test: Re-init completion for every test
misc: pci_endpoint_test: Free IRQs before removing the device
PCI: epf-test: Simplify transfers result print
PCI: epf-test: Simplify DMA support checks
PCI: epf-test: Cleanup request result handling
PCI: epf-test: Cleanup pci_epf_test_cmd_handler()
PCI: epf-test: Improve handling of command and status registers
PCI: epf-test: Simplify IRQ test commands execution
PCI: epf-test: Simplify pci_epf_test_raise_irq()
PCI: epf-test: Simplify read/write/copy test functions
PCI: epf-test: Use dmaengine_submit() to initiate DMA transfer
PCI: epf-test: Fix DMA transfer completion detection
PCI: epf-test: Fix DMA transfer completion initialization
PCI: endpoint: Move pci_epf_type_add_cfs() code
PCI: endpoint: Automatically create a function specific attributes group
PCI: endpoint: Fix a Kconfig prompt of vNTB driver
- Remove writes to unused registers (Rick Wertenbroek)
- Write endpoint Device ID using correct register (Rick Wertenbroek)
- Assert PCI Configuration Enable bit after probe so endpoint responds
instead of generating Request Retry Status messages (Rick Wertenbroek)
- Poll waiting for PHY PLLs to lock (Rick Wertenbroek)
- Update RK3399 example DT binding to be valid (Rick Wertenbroek)
- Use RK3399 PCIE_CLIENT_LEGACY_INT_CTRL to generate INTx instead of
manually generating PCIe message (Rick Wertenbroek)
- Use multiple windows to avoid address translation conflicts (Rick
Wertenbroek)
- Use u32 (not u16) when accessing 32-bit registers (Rick Wertenbroek)
- Hide MSI-X Capability, since RK3399 can't generate MSI-X (Rick
Wertenbroek)
- Set endpoint controller required alignment to 256 (Damien Le Moal)
* pci/controller/rockchip:
PCI: rockchip: Set address alignment for endpoint mode
PCI: rockchip: Don't advertise MSI-X in PCIe capabilities
PCI: rockchip: Use u32 variable to access 32-bit registers
PCI: rockchip: Fix window mapping and address translation for endpoint
PCI: rockchip: Fix legacy IRQ generation for RK3399 PCIe endpoint core
dt-bindings: PCI: Update the RK3399 example to a valid one
PCI: rockchip: Add poll and timeout to wait for PHY PLLs to be locked
PCI: rockchip: Assert PCI Configuration Enable bit after probe
PCI: rockchip: Write PCI Device ID to correct register
PCI: rockchip: Remove writes to unused registers
- Remove unused static pcie_base and pcie_dev (Geert Uytterhoeven)
* pci/controller/rcar:
PCI: rcar: Use correct product family name for Renesas R-Car
PCI: rcar-host: Remove unused static pcie_base and pcie_dev
- Disable register write access after init for IP v2.3.3, v2.9.0
(Manivannan Sadhasivam)
- Use DWC helpers for enabling/disabling writes to DBI registers
(Manivannan Sadhasivam)
- Hide slot hotplug capability for IP v1.0.0, v1.9.0, v2.1.0, v2.3.2,
v2.3.3, v2.7.0, v2.9.0 (Manivannan Sadhasivam)
- Reuse v2.3.2 post-init sequence for v2.4.0 (Manivannan Sadhasivam)
-
* pci/controller/qcom:
PCI: qcom: Do not advertise hotplug capability for IP v2.1.0
PCI: qcom: Do not advertise hotplug capability for IP v1.0.0
PCI: qcom: Use post init sequence of IP v2.3.2 for v2.4.0
PCI: qcom: Do not advertise hotplug capability for IP v2.3.2
PCI: qcom: Do not advertise hotplug capability for IPs v2.3.3 and v2.9.0
PCI: qcom: Do not advertise hotplug capability for IPs v2.7.0 and v1.9.0
PCI: qcom: Disable write access to read only registers for IP v2.9.0
PCI: qcom: Use DWC helpers for modifying the read-only DBI registers
PCI: qcom: Disable write access to read only registers for IP v2.3.3
- Wait for link to come up only if we've initiated link training (Ajay
Agarwal)
- Save and restore imx6 Root Port MSI control to work around hardware
defect (Richard Zhu)
* pci/controller/dwc:
PCI: imx6: Save and restore root port MSI control in suspend and resume
PCI: dwc: Wait for link up only if link is started
- Wait for link retrain to complete when working around the J721E i2085
erratum with Gen2 mode (Siddharth Vadapalli)
* pci/controller/cadence:
PCI: cadence: Fix Gen2 Link Retraining process
- Delay extra 250ms after FLR of Solidigm P44 Pro NVMe to avoid KVM hang
when guest is rebooted (Mike Pastore)
- Add function 1 DMA alias quirk for Marvell 88SE9235 (Robin Murphy)
* pci/virtualization:
PCI: Add function 1 DMA alias quirk for Marvell 88SE9235
PCI: Delay after FLR of Solidigm P44 Pro NVMe
- When we coalesce host bridge windows, remove invalidated resources from
the resource tree so future allocations work correctly (Ross Lagerwall)
* pci/resource:
PCI: Release resource invalidated by coalescing
- Reduce wait time for secondary bus to be ready to speed up resume (Mika
Westerberg)
- Avoid putting EloPOS E2/S2/H2 (as well as Elo i2) PCIe Ports in D3cold
(Ondrej Zary)
- Call _REG when transitioning D-states so AML that uses the PCI config
space OpRegion works, which fixes some ASMedia GPIO controllers (Mario
Limonciello)
* pci/pm:
PCI/ACPI: Call _REG when transitioning D-states
PCI/ACPI: Validate acpi_pci_set_power_state() parameter
PCI/PM: Avoid putting EloPOS E2/S2/H2 PCIe Ports in D3cold
PCI/PM: Shorten pci_bridge_wait_for_secondary_bus() wait time for slow links
- Simplify Attention Button logging (Bjorn Helgaas)
- Cancel bringup sequence if card is not present, to keep from blinking
Power Indicator indefinitely (Rongguang Wei)
- Reassign bridge resources if necessary for ACPI hotplug (Igor Mammedov)
* pci/hotplug:
PCI: acpiphp: Reassign resources on bridge if necessary
PCI: pciehp: Cancel bringup sequence if card is not present
PCI: pciehp: Simplify Attention Button logging
- Add PCI_EXT_CAP_ID_PL_32GT define (Ben Dooks)
- Propagate firmware node by calling device_set_node() for better
modularity (Andy Shevchenko)
- Discover Data Link Layer Link Active Reporting earlier so quirks can take
advantage of it (Maciej W. Rozycki)
- Use cached Data Link Layer Link Active Reporting capability in pciehp,
powerpc/eeh, and mlx5 (Maciej W. Rozycki)
- Run quirk for devices that require OS to clear Retrain Link earlier, so
later quirks can rely on it (Maciej W. Rozycki)
- Export pcie_retrain_link() for use outside ASPM (Maciej W. Rozycki)
- Add Data Link Layer Link Active Reporting as another way for
pcie_retrain_link() to determine the link is up (Maciej W. Rozycki)
- Work around link training failures (especially on the ASMedia ASM2824
switch) by training first at 2.5GT/s and then attempting higher rates
(Maciej W. Rozycki)
* pci/enumeration:
PCI: Add failed link recovery for device reset events
PCI: Work around PCIe link training failures
PCI: Use pcie_wait_for_link_status() in pcie_wait_for_link_delay()
PCI: Add support for polling DLLLA to pcie_retrain_link()
PCI: Export pcie_retrain_link() for use outside ASPM
PCI: Export PCIe link retrain timeout
PCI: Execute quirk_enable_clear_retrain_link() earlier
PCI/ASPM: Factor out waiting for link training to complete
PCI/ASPM: Avoid unnecessary pcie_link_state use
PCI/ASPM: Use distinct local vars in pcie_retrain_link()
net/mlx5: Rely on dev->link_active_reporting
powerpc/eeh: Rely on dev->link_active_reporting
PCI: pciehp: Rely on dev->link_active_reporting
PCI: Initialize dev->link_active_reporting earlier
PCI: of: Propagate firmware node by calling device_set_node()
PCI: Add PCI_EXT_CAP_ID_PL_32GT define
# Conflicts:
# drivers/pci/pcie/aspm.c
- Disable ASPM on MFD function removal to avoid use-after-free (Ding Hui)
- Tighten up pci_enable_link_state() and pci_disable_link_state()
interfaces so they don't enable/disable states the driver didn't specify
(Ajay Agarwal)
- Avoid link retraining race that can happen if ASPM sets link control
parameters while the link is in the midst of training for some other
reason (Ilpo Järvinen)
* pci/aspm:
PCI/ASPM: Avoid link retraining race
PCI/ASPM: Factor out pcie_wait_for_retrain()
PCI/ASPM: Return 0 or -ETIMEDOUT from pcie_retrain_link()
PCI/ASPM: Remove unnecessary ASPM_STATE_L1SS check
PCI/ASPM: Rename L1.2-specific functions from 'l1ss' to 'l12'
PCI/ASPM: Set ASPM_STATE_L1 when driver enables L1.1 or L1.2
PCI/ASPM: Set only ASPM_STATE_L1 when driver enables L1
PCI/ASPM: Disable only ASPM_STATE_L1 when driver disables L1
PCI/ASPM: Disable ASPM on MFD function removal to avoid use-after-free
The ret variable in the vmd_enable_domain() function was used
uninitialized when printing a warning message upon failure of
the pci_reset_bus() function.
Thus, fix the issue by assigning ret with the value returned from
pci_reset_bus() before referencing it in the warning message.
This was detected by Smatch:
drivers/pci/controller/vmd.c:931 vmd_enable_domain() error: uninitialized symbol 'ret'.
[kwilczynski: drop the second patch from the series, add missing reported
by tag, commit log]
Fixes: 0a584655ef ("PCI: vmd: Fix secondary bus reset for Intel bridges")
Link: https://lore.kernel.org/all/202305270219.B96IiIfv-lkp@intel.com
Link: https://lore.kernel.org/linux-pci/20230420094332.1507900-2-korantwork@gmail.com
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Xinghui Li <korantli@tencent.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-16-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-15-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-14-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-13-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-12-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-10-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks.
The iproc driver always returns 0, it's just a bit hidden. So make
iproc_pcie_remove() return void instead of always zero and convert the
platform driver to the alternative remove callback that returns void and
eventually replaces the int returning callback.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-9-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-8-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert the dwc drivers from always returning zero in the remove
callback to the void returning variant.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-7-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Renesas uses "R-Car" as the name for their product family and development
platform. Thus, correct other variants such as "rcar", "RCar", "Rcar",
etc., to the preferred spelling.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230607204750.27837-1-wsa+renesas@sang-engineering.com
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Layerscape has PME interrupt, which can be used as linkup notifier. Set
CFG_READY bit of PEX_PF0_CONFIG to enable accesses from root complex when
linkup detected.
Link: https://lore.kernel.org/r/20230515151049.2797105-1-Frank.Li@nxp.com
Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add PCI Endpoint driver for the Qualcomm MHI (Modem Host Interface) bus.
The driver implements the MHI function over PCI in the endpoint device such
as SDX55 modem. The MHI endpoint function driver acts as a controller
driver for the MHI Endpoint stack and carries out all PCI related
functionality.
Link: https://lore.kernel.org/r/20230602114756.36586-9-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Add support to pass BME (Bus Master Enable) notification to Endpoint
function driver so that the BME event can be processed by the function.
Link: https://lore.kernel.org/r/20230602114756.36586-8-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Add support to pass Link down notification to Endpoint function driver so
that the LINK_DOWN event can be processed by the function.
Link: https://lore.kernel.org/r/20230602114756.36586-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Add support to notify the EPF device about the Bus Master Enable (BME)
event received by the EPC device from the Root complex.
Link: https://lore.kernel.org/r/20230602114756.36586-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Add support to notify the EPF device about the linkdown event from the EPC
device.
Link: https://lore.kernel.org/r/20230602114756.36586-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
When the EPC is started or stopped multiple times from configfs, just
return -EALREADY. There is no need to call the EPC start/stop functions
in those cases.
Link: https://lore.kernel.org/r/20230602114756.36586-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Currently, the EPF probe function doesn't get the device ID argument needed
to correctly identify the device table ID of the EPF device.
When multiple entries are added to the "struct pci_epf_device_id" table,
the probe function needs to identify the correct one. This is achieved by
modifying the pci_epf_match_id() function to return the match ID pointer
and passing it to the driver's probe function.
pci_epf_device_match() function can return bool based on the return value
of pci_epf_match_id().
Link: https://lore.kernel.org/r/20230602114756.36586-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Both pci_epc_raise_irq() and pci_epc_map_msi_irq() APIs expect the
MSI/MSI-X vectors to start from 1 but it is not documented. Add the range
info to the kdoc of the APIs to make it clear.
Link: https://lore.kernel.org/r/20230602114756.36586-2-manivannan.sadhasivam@linaro.org
Fixes: 5e8cb40338 ("PCI: endpoint: Add EP core layer to enable EP controller and EP functions")
Fixes: 87d5972e47 ("PCI: endpoint: Add pci_epc_ops to map MSI IRQ")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
pci_epf_type_add_cfs() should not be called with an unbound EPF device,
that is, an epf device with epf->driver not set. For such case, replace the
NULL return in pci_epf_type_add_cfs() with a clear ERR_PTR(-ENODEV) pointer
error return.
Link: https://lore.kernel.org/r/20230515074348.595704-2-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivami <manivannan.sadhasivam@linaro.org>
In pci_epf_test_init_dma_chan() epf_test->dma_chan_rx is assigned from
dma_request_channel() with DMA_DEV_TO_MEM as filter.dma_mask.
However, in pci_epf_test_data_transfer() if the dir is DMA_DEV_TO_MEM,
epf->dma_chan_rx should be used but instead we are using
epf_test->dma_chan_tx.
Fix it.
Link: https://lore.kernel.org/r/20230412063447.2841177-1-yoshihiro.shimoda.uh@renesas.com
Fixes: 8353813c88 ("PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities")
Tested-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
