IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Convert the Bosch C_CAN/D_CAN controller device tree binding
documentation to json-schema.
Document missing properties.
Remove "ti,hwmods" as it is no longer used in TI dts.
Make "clocks" required as it is used in all dts.
Update the examples.
Link: https://lore.kernel.org/r/20210805192750.9051-1-dariobin@libero.it
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Enable termination-* binding and provide validation example for it.
Link: https://lore.kernel.org/r/20210818071232.20585-3-o.rempel@pengutronix.de
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Some boards provide GPIO controllable termination resistor. Provide
binding to make use of it.
Link: https://lore.kernel.org/r/20210818071232.20585-2-o.rempel@pengutronix.de
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The commit 8950dcd83ae7d ("iommu/vt-d: Leave scalable mode default off")
leaves the scalable mode default off and end users could turn it on with
"intel_iommu=sm_on". Using the Intel IOMMU scalable mode for kernel DMA,
user-level device access and Shared Virtual Address have been enabled.
This enables the scalable mode by default if the hardware advertises the
support and adds kernel options of "intel_iommu=sm_on/sm_off" for end
users to configure it through the kernel parameters.
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Suggested-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20210720013856.4143880-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20210818134852.1847070-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
With the removal of the legacy IDE driver in kb7fb14d3ac63 ("ide: remove
the legacy ide driver"), this crashpoint no longer points to a valid
function.
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kevin Mitchell <kevmitch@arista.com>
Link: https://lore.kernel.org/r/20210819022940.561875-3-kevmitch@arista.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When scsi_dispatch_cmd was moved to scsi_lib.c and made static, some
compilers (i.e., at least gcc 8.4.0) decided to compile this
inline. This is a problem for lkdtm.ko, which inserted a kprobe
on this function for the SCSI_DISPATCH_CMD crashpoint.
Move this crashpoint one function up the call chain to
scsi_queue_rq. Though this is also a static function, it should never be
inlined because it is assigned as a structure entry. Therefore,
kprobe_register should always be able to find it.
Fixes: 82042a2cdb55 ("scsi: move scsi_dispatch_cmd to scsi_lib.c")
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kevin Mitchell <kevmitch@arista.com>
Link: https://lore.kernel.org/r/20210819022940.561875-2-kevmitch@arista.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a rcu argument to the ->get_acl() callback to allow
get_cached_acl_rcu() to call the ->get_acl() method in the next patch.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The 'contains' keyword applies to elements within an array, so
using 'items' only makes sense if the elements of the array are another
array which is not the case for 'compatible' properties.
Looking at the driver, it seems the intent was the condition should be
true when 'faraday,ftpci100' is present, so we can drop
'cortina,gemini-pci'.
Fixes: 2720b991337d ("dt-bindings: PCI: ftpci100: convert faraday,ftpci100 to YAML")
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-pci@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210817174743.541353-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Convert Synopsys IntelliDDR Multi Protocol memory controller (present in
Xilinx Zynq and ZynqMP) bindings to DT schema format using json-schema.
New binding contains copied parts of description from previous binding
document, therefore the license is set as GPL-2.0-only.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210818113139.84869-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert Broadcom DDR PHY Front End (DPFE) bindings to DT schema format
using json-schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Markus Mayer <mmayer@broadcom.com>
Link: https://lore.kernel.org/r/20210817080617.14503-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Rob Herring <robh@kernel.org>
This patch renames a documentation libbpf.rst to index.rst. In order
for readthedocs.org to pick this file up and properly build the
documentation site.
It also changes the title type of the ABI subsection in the
naming convention doc. This is so that readthedocs.org doesn't treat this
section as a separate document.
Signed-off-by: Grant Seltzer <grantseltzer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210818151313.49992-1-grantseltzer@gmail.com
This fixes the "shared memory state machine" (SMSM) interrupt logic to
avoid missing transitions happening while the interrupts are masked.
SM6115 support is added to smd-rpm and rpmpd.
The Qualcomm SCM firmware driver is once again made possible to compile
and load as a kernel module.
An out-of-bounds error related to the cooling devices of the AOSS driver
is corrected. The binding is converted to YAML and a generic compatible
is introduced to reduce the driver churn.
The GENI wrapper gains a helper function used in I2C and SPI for
switching the serial engine hardware to use the wrapper's DMA-engine.
Lastly it contains a number of cleanups and smaller fixes for rpmhpd,
socinfo, CPR, mdt_loader and the GENI DT binding.
-----BEGIN PGP SIGNATURE-----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=88qN
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=dS58
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.15
This fixes the "shared memory state machine" (SMSM) interrupt logic to
avoid missing transitions happening while the interrupts are masked.
SM6115 support is added to smd-rpm and rpmpd.
The Qualcomm SCM firmware driver is once again made possible to compile
and load as a kernel module.
An out-of-bounds error related to the cooling devices of the AOSS driver
is corrected. The binding is converted to YAML and a generic compatible
is introduced to reduce the driver churn.
The GENI wrapper gains a helper function used in I2C and SPI for
switching the serial engine hardware to use the wrapper's DMA-engine.
Lastly it contains a number of cleanups and smaller fixes for rpmhpd,
socinfo, CPR, mdt_loader and the GENI DT binding.
* tag 'qcom-drivers-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: smsm: Fix missed interrupts if state changes while masked
soc: qcom: smsm: Implement support for get_irqchip_state
soc: qcom: mdt_loader: be more informative on errors
dt-bindings: qcom: geni-se: document iommus
soc: qcom: smd-rpm: Add SM6115 compatible
soc: qcom: geni: Add support for gpi dma
soc: qcom: geni: move GENI_IF_DISABLE_RO to common header
PM: AVS: qcom-cpr: Use nvmem_cell_read_variable_le_u32()
drivers: soc: qcom: rpmpd: Add SM6115 RPM Power Domains
dt-bindings: power: rpmpd: Add SM6115 to rpmpd binding
dt-bindings: soc: qcom: smd-rpm: Add SM6115 compatible
soc: qcom: aoss: Fix the out of bound usage of cooling_devs
firmware: qcom_scm: Allow qcom_scm driver to be loadable as a permenent module
soc: qcom: socinfo: Don't print anything if nothing found
soc: qcom: rpmhpd: Use corner in power_off
soc: qcom: aoss: Add generic compatible
dt-bindings: soc: qcom: aoss: Convert to YAML
dt-bindings: soc: qcom: aoss: Add SC8180X and generic compatible
firmware: qcom_scm: remove a duplicative condition
firmware: qcom_scm: Mark string array const
Link: https://lore.kernel.org/r/20210816214840.581244-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add documentation for the new device attribute file ncq_prio_supported,
and its SAS HBA equivalent sas_ncq_prio_supported.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210816014456.2191776-12-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
NCQ priority is an optional feature of the NCQ feature set and should
not be confused with the NCQ feature set itself. Clarify the
description of the ncq_prio_enable attribute to avoid this confusion.
Also add the missing documentation for the equivalent
sas_ncq_prio_enable attribute.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210816014456.2191776-11-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- New machines
* Facebook's Cloudripper
* Facebook's Elbert
* Facebook's Fuji
All three carry the description of "Facebook's next generation switch
platform with an AST2600 BMC integrated for health monitoring
purpose."
They share a 128 MB SPI NOR flash layout that is also used by some
older platforms.
* Inspur's NF5280M6, an x86 platform server with an AST2500-based BMC
- SGPIO updates including AST2600 support
- GPIO descriptions for the IBM AST2600 machines
- Pinctrl fix
- Updates to Facebook's AST2500 based machines
-----BEGIN PGP SIGNATURE-----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=GIHt
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Y4SA
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.15-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt
ASPEED device tree updates for 5.15
- New machines
* Facebook's Cloudripper
* Facebook's Elbert
* Facebook's Fuji
All three carry the description of "Facebook's next generation switch
platform with an AST2600 BMC integrated for health monitoring
purpose."
They share a 128 MB SPI NOR flash layout that is also used by some
older platforms.
* Inspur's NF5280M6, an x86 platform server with an AST2500-based BMC
- SGPIO updates including AST2600 support
- GPIO descriptions for the IBM AST2600 machines
- Pinctrl fix
- Updates to Facebook's AST2500 based machines
* tag 'aspeed-5.15-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: (23 commits)
ARM: dts: aspeed: p10bmc: Add power control pins
ARM: dts: aspeed: cloudripper: Add comments for "mdio1"
ARM: dts: aspeed: minipack: Update flash partition table
ARM: dts: aspeed: Add Facebook Fuji (AST2600) BMC
ARM: dts: aspeed: Add Facebook Elbert (AST2600) BMC
ARM: dts: aspeed: Add Facebook Cloudripper (AST2600) BMC
ARM: dts: aspeed: Common dtsi for Facebook AST2600 Network BMCs
ARM: dts: aspeed: wedge400: Use common flash layout
ARM: dts: Add Facebook BMC 128MB flash layout
ARM: dts: aspeed-g5: Remove ngpios from sgpio node.
ARM: dts: aspeed-g6: Add SGPIO node.
dt-bindings: aspeed-sgpio: Add ast2600 sgpio
dt-bindings: aspeed-sgpio: Convert txt bindings to yaml.
ARM: dts: aspeed: ast2500evb: Enable built in RTC
ARM: dts: aspeed: tacoma: Add TPM reset GPIO
ARM: dts: rainier, everest: Add TPM reset GPIO
ARM: dts: aspeed: wedge100: Enable ADC channels
ARM: dts: aspeed: galaxy100: Remove redundant ADC device
ARM: dts: aspeed: wedge40: Remove redundant ADC device
ARM: dts: aspeed: Enable ADC in Facebook AST2400 common dtsi
...
Link: https://lore.kernel.org/r/CACPK8XdWRBb9cuDWGQPfK8R8TsZuydJQHsL4_e2w=HvCKAMogg@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
SDM660 and SDM630 was concluded to be similar enough that they should be
merged, and the derivative SDM636 was added to the bunch. The combined
platform gained support for GPU, DMA, I2C, IMEM, display, power-domains,
SDHCI, thermal, USB, interconnects, VADC, WLED and audio remoteproc. The
Sony Xperia "Ganges" platform was similarly merged with "Nile", got
cleaned up and gained touchscreen, USB, volume keys and uSD support.
IPQ6018 gains USB2 and PCIe support and a few minor fixes. IPQ8074
gains SCM, PRNG and Crypto support and a DT style update of the PCIe
nodes.
MSM8916 gains Coresight STM support. The Xiaomi Redmi 2 is introduced,
with touchscreen, notification LED and IMU support. MSM8996 gains
support for GPU cooling and v3.0 of the SoC, which is used to introduce
support for the Sony Xperia X Performance, XZ and XZs phones.
SC7180 finally gains DisplayPort support and LPASS is updated
accordingly. A number of fixes are introduced and with the newly
introduced DRM aux bus in place Trogdor's panel is moved under the eDP
bridge. SC7280 gained USB, eMMC, SD-card, QFPROM and IPA support, the
new IDP2 board was added.
SM6126 (aka Snapdragon 665) was introduced, together with the Sony
Xperia 10II phone with support for framebuffer, USB, eMMC and volume
keys.
SM8150 gained inline crypto support for UFS enabled, CPU opp-tables was
introduced to scale DDR and L3 frequencies and SPI nodes where added, in
addition to a number of smaller fixes.
SM8250 gained a number of minor fixes and had its serial engines wired
up to use the GENI wrappers' DMA engines.
SM8350 had wakeup-parent defined for the TLMM gpio node and I2C13 was
introduced.
SDM845 display clocks was corrected and Lenovo Yoga C630 got IPA enabled
and now has working LTE connectivity.
Additionally a number of minor fixes throughout to correct DT validation
warnings.
Lastly v5.14-rc3 is merge in to resolve the merge conflicts caused by
the USB maintainer deciding to fix a regression in his tree.
-----BEGIN PGP SIGNATURE-----
iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmEa7+IbHGJqb3JuLmFu
ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FAlsP/0ANjr6SLBWDZ5fAv/7a
Fz26/VeZwjnZ0uzCAmsfjDfzShPuZLoDw1WzoU2Tqj1YGk6TZsResjBHAeVTHfbI
oTPVONqgumjOhVsGUKIWtYOybeO5+byOREZGR+bxGjGnhLsNwvcMsR6fplL6w+x/
/fqF+hzRmiVVvD61eH2r8r6mXlnmT27kS7NeJAYFOh1YQmsEK1HKs6e2tbV00ftb
bEWgcAmXSwpJ+0aSb4JN54DS7/LFFGBB9kVC65pJJpAkcsCT74QP0kY28iNLn9Qk
Yb/ueSFXHT/mdlhsYGZWZk7p9Wr6P/Wpyr3WM3hJDjwSQXF7LkaI78afbbVFNWsW
p529sEZa3z21vLDddSd/BVh32es4bu3Fnl/mPk4csrqWFOkvjHsOYD+hBgri+GBP
a0lwOSDngIAZQrD8dRo5z5SrjAIkTRTwws8BGj/dD0NjgFDWPeveIlmr7miSHK6c
9ljK28WLajrLNOcnwqA5guCXe5zOP34I+CgVMdC5MfsbKds1u7X5i+ioiRUS0g7j
3GpwN05+QNGEm5GVmvjCTaRNRK2sL8jBUakJifzfdp5wYWY9BngB8v8xDkYwI9v0
ozM0MzvwWX+2bqGR7teUcAZeA/0aDQqRZd1mxE2UkhDs12iBLX8NxDV+kFvk0XPi
/foS/qsmiIiuvuoTAeGVXecM
=GGZW
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=lQQn
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 updates for v5.15
SDM660 and SDM630 was concluded to be similar enough that they should be
merged, and the derivative SDM636 was added to the bunch. The combined
platform gained support for GPU, DMA, I2C, IMEM, display, power-domains,
SDHCI, thermal, USB, interconnects, VADC, WLED and audio remoteproc. The
Sony Xperia "Ganges" platform was similarly merged with "Nile", got
cleaned up and gained touchscreen, USB, volume keys and uSD support.
IPQ6018 gains USB2 and PCIe support and a few minor fixes. IPQ8074
gains SCM, PRNG and Crypto support and a DT style update of the PCIe
nodes.
MSM8916 gains Coresight STM support. The Xiaomi Redmi 2 is introduced,
with touchscreen, notification LED and IMU support. MSM8996 gains
support for GPU cooling and v3.0 of the SoC, which is used to introduce
support for the Sony Xperia X Performance, XZ and XZs phones.
SC7180 finally gains DisplayPort support and LPASS is updated
accordingly. A number of fixes are introduced and with the newly
introduced DRM aux bus in place Trogdor's panel is moved under the eDP
bridge. SC7280 gained USB, eMMC, SD-card, QFPROM and IPA support, the
new IDP2 board was added.
SM6126 (aka Snapdragon 665) was introduced, together with the Sony
Xperia 10II phone with support for framebuffer, USB, eMMC and volume
keys.
SM8150 gained inline crypto support for UFS enabled, CPU opp-tables was
introduced to scale DDR and L3 frequencies and SPI nodes where added, in
addition to a number of smaller fixes.
SM8250 gained a number of minor fixes and had its serial engines wired
up to use the GENI wrappers' DMA engines.
SM8350 had wakeup-parent defined for the TLMM gpio node and I2C13 was
introduced.
SDM845 display clocks was corrected and Lenovo Yoga C630 got IPA enabled
and now has working LTE connectivity.
Additionally a number of minor fixes throughout to correct DT validation
warnings.
Lastly v5.14-rc3 is merge in to resolve the merge conflicts caused by
the USB maintainer deciding to fix a regression in his tree.
* tag 'qcom-arm64-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (114 commits)
arm64: dts: qcom: sm8250: assign DSI clock source parents
arm64: dts: qcom: sdm845-mtp: assign DSI clock source parents
arm64: dts: qcom: sdm845: assign DSI clock source parents
arm64: dts: qcom: sc7180: assign DSI clock source parents
arm64: dts: qcom: sc7280-idp: Add device tree files for IDP2
dt-bindings: arm: qcom: Document qcom,sc7280-idp2 board
arm64: dts: qcom: sm8350: fix IPA interconnects
arm64: dts: qcom: sc7180: define ipa_fw_mem node
arm64: dts: qcom: sc7280: enable IPA for sc7280-idp
arm64: dts: qcom: sc7280: add IPA information
arm64: dts: qcom: sc7180-trogdor: Move panel under the bridge chip
arm64: dts: qcom: ipq8074: add PRNG node
arm64: dts: qcom: ipq8074: add crypto nodes
arm64: dts: qcom: sm8350: add qupv3_id_1/i2c13 nodes
arm64: dts: qcom: ipq6018: Add pcie support
arm64: dts: qcom: pm8150b: Add DTS node for PMIC VBUS booster
arm64: dts: qcom: sm8150: add SPI nodes
arm64: dts: qcom: msm8916: Enable CoreSight STM component
arm64: dts: qcom: sc7280: Add qfprom node
arm64: dts: qcom: sc7280: Fixup the cpufreq node
...
Link: https://lore.kernel.org/r/20210816231223.586597-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
To parallel the sysfs behaviour, merge the new build-time option
for DMA domain strictness into the default domain type choice.
Suggested-by: Joerg Roedel <joro@8bytes.org>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/d04af35b9c0f2a1d39605d7a9b451f5e1f0c7736.1628682049.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The sysfs interface for default domain types exists primarily so users
can choose the performance/security tradeoff relevant to their own
workload. As such, the choice between the policies for DMA domains fits
perfectly as an additional point on that scale - downgrading a
particular device from a strict default to non-strict may be enough to
let it reach the desired level of performance, while still retaining
more peace of mind than with a wide-open identity domain. Now that we've
abstracted non-strict mode as a distinct type of DMA domain, allow it to
be chosen through the user interface as well.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/0e08da5ed4069fd3473cfbadda758ca983becdbf.1628682049.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Many Lenovo BIOS's support the ability to send a debug command which
is useful for debugging and testing unreleased or early features.
Adding support for this feature as a module parameter.
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20210817001501.293501-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Pull KCSAN updates from Paul E. McKenney:
- improve comments
- introduce CONFIG_KCSAN_STRICT (which RCU uses)
- optimize use of get_ctx() by kcsan_found_watchpoint()
- rework atomic.h into permissive.h
- add the ability to ignore writes that change only one bit of a given data-racy variable.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The Samsung Exynos SoC SATA bindings are not implemented in the kernel,
not used and superseded by generic
Documentation/devicetree/bindings/ata/ahci-platform.txt bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210811083859.28234-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Rob Herring <robh@kernel.org>
This adds a device tree binding for the Winbond W83781D and its
sibling HW monitoring ICs. This is used in for example the Freecom
FSG-3 router/NAS.
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210729230543.2853485-1-linus.walleij@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Make top and bottom border lines match.
Documentation/hwmon/sht4x.rst:42: WARNING: Malformed table.
Text in column margin in table line 4.
Fixes: 505c2549373f ("hwmon: Add sht4x Temperature and Humidity Sensor Driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Navin Sankar Velliangiri <navin@linumiz.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: linux-hwmon@vger.kernel.org
Link: https://lore.kernel.org/r/20210727232054.7426-1-rdunlap@infradead.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
1. Fix number of pins in one GPIO pin bank.
2. Add support for Exynos850 SoC (Exynos3830).
-----BEGIN PGP SIGNATURE-----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=bMSO
-----END PGP SIGNATURE-----
Merge tag 'samsung-pinctrl-5.15' of https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel
Samsung pinctrl drivers changes for v5.15
1. Fix number of pins in one GPIO pin bank.
2. Add support for Exynos850 SoC (Exynos3830).
Don't leave a blank line, to keep the style consistent
with other node descriptions.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The value of FAULT_* macros and its description in f2fs.rst became
inconsistent, fix this to keep compatibility of fault injection
interface.
Fixes: 67883ade7a98 ("f2fs: remove FAULT_ALLOC_BIO")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch supports to inject fault into f2fs_kmem_cache_alloc().
Usage:
a) echo 32768 > /sys/fs/f2fs/<dev>/inject_type or
b) mount -o fault_type=32768 <dev> <mountpoint>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For compressed file, after release compress blocks, don't allow write
direct, but we should allow write direct after truncate to zero.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Fengnan Chang <changfengnan@vivo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
A small pull request to pick up a few new drivers and some cleanup
and fix patches.
New device support
* ad5110 non-volatile digital potentiometer
- New driver
* renesas rzl/gl2 12-bit / 8 channel ADC block
- New driver and bindings
Minor or late breaking fixes and cleanups
* ltc2983
- Fix a false assumption of initial interrupt during probe().
* hp03
- Use devm_* to simplify probe and allow the remove function to be dropped.
* rockchip_saradc
- Use a regulator notifier to reduce overheads of querying the scale.
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmEbzu0RHGppYzIzQGtl
cm5lbC5vcmcACgkQVIU0mcT0FogK9RAAj+v3Y7AaHxjMltqZYSrOnkuzYkXnL8Sm
1th0yh1m+U65iyZgZNKxMRg7ABW6+BW2WOBDr5qcfISiKI9VKzxvdSG3S1gsjkOj
mpDX4HNdTToXapWbN9Iw8IwU35r+116YPqrSKcau1Xyani1dsMOp8MhRvzwzh47R
ixlHTVDbu1aeCkIxEuN8HfCyAftbC8P8olenKRzbDvcQxApr68Sr0wvmBDkHk8lg
VjFRvHh2GQZbptvCKt0HegmEEQ9qiMMJmua8o7g49uarIAqzhKCDAfSStszCMzHD
gAe+RPIZaTlz2iY1YMi28rhJWj8VC2hCZl7PIO27AOw05ynVg9tVo4w74cQ0QYFQ
N+2J+L2FRcMuwdPmpAgIwVDY+B6EvAbNkS88Pco45YmfTkzcnrctk2jv4+DSSRMb
5p5ojhq7ONxVS/MPE0mkZRWO8jFyiqNB3YiktdsaA++gFcH7PPuIxsep9GBbjaik
LxrZzbXvmE0hI24iz0oKdp9dO1N8Gws5BtZEtx1quJYxDPwa3cDDOrpCKvnsR86E
JKRkCZ7jPT1Rahj6tOdtU84xbNTRrqFDXZpx8BN0MqV2QqvXSglWTvB7fMJqf78i
r9lx/LJ9LaQ971gQ/dtPSB/7o6TlOxG55JP+GnZOH/0DGAicFCfllluEx1bVTz7T
AgI7Ng6s7Mk=
=d/Fm
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.15b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
2nd set of new IIO device support and cleanups for the 5.15 cycle.
A small pull request to pick up a few new drivers and some cleanup
and fix patches.
New device support
* ad5110 non-volatile digital potentiometer
- New driver
* renesas rzl/gl2 12-bit / 8 channel ADC block
- New driver and bindings
Minor or late breaking fixes and cleanups
* ltc2983
- Fix a false assumption of initial interrupt during probe().
* hp03
- Use devm_* to simplify probe and allow the remove function to be dropped.
* rockchip_saradc
- Use a regulator notifier to reduce overheads of querying the scale.
* tag 'iio-for-5.15b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: adc: Add driver for Renesas RZ/G2L A/D converter
dt-bindings: iio: adc: Add binding documentation for Renesas RZ/G2L A/D converter
iio: pressure: hp03: update device probe to register with devm functions
iio: adc: rockchip_saradc: add voltage notifier so get referenced voltage once at probe
iio: ltc2983: fix device probe
iio: potentiometer: Add driver support for AD5110
dt-bindings: iio: potentiometer: Add AD5110 in trivial-devices
Add bindings for the Rockchip serial flash controller. New device
specific parameter of rockchip,sfc-no-dma included in documentation.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20210812134546.31340-2-jon.lin@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support type switch by pericfg register between USB3, PCIe,
SATA, SGMII, this is used to replace the way through efuse or
jumper.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1629191987-20774-1-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
It is possible that a directory tree is shared between multiple overlay
instances as a lower layer. In this case when one instance executes a file
residing on the lower layer, the other instance denies a truncate(2) call
on this file.
This only happens for truncate(2) and not for open(2) with the O_TRUNC
flag.
Fix this interference and inconsistency by removing the preliminary
i_writecount check before copy-up.
This means that unlike on normal filesystems truncate(argv[0]) will now
succeed. If this ever causes a regression in a real world use case this
needs to be revisited.
One way to fix this properly would be to keep a correct i_writecount in the
overlay inode, but that is difficult due to memory mapping code only
dealing with the real file/inode.
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This introduces the MSM8226 platform and an initial dts for the Samsung
Galaxy S III Neo phone.
MSM8974 gains another UART and this is used to enable Bluetooth on the
Sony Xperia Z2 Tablet. Samsung Galaxy S5 gains regulator definitions for
audio and modem remoteprocs, effectively enabling these.
DSI clocks on APQ8064 are updates as the old legacy clock names are no
longer supported by the driver. And IPQ806x GMAC nodes gains AHB resets
wired up.
Lastly APQ8060 is converted to a SPDX header and the ethernet node is
updates in accordance with the binding.
-----BEGIN PGP SIGNATURE-----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=JynD
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmEbgcEACgkQmmx57+YA
GNlC0Q//USmb8u05Sn7DlYu46UBcNcQrgGOCXIrNWkERm7jxEhUqp4soI24jomiq
1GEKWApzPlmLtBvQKiGl5IoCypYbZ0kOyFBP+FYezmSD8vCU46UtnzKV+b3mzwQH
rDPFogjj92LBv1+i+8jgry3tvrdK3oM2QJ2cSIF7EyXjuMBok36zXdPpG4mP8dBT
vla+IZFa7GXOi+SKVykB8tlaGPaslamIfG6ZtjeJJuGsPRDotjmjc9vvGEtKfOF0
cHKKTtPli60NqwHX61UURNAcaoURBw4W4Jy0KolvMWo98I+TyWf18xRF2aanm8pa
mLsK7SlqipRY1ofTeHZwb6eK3j13qD5knv+tWjjwCTCmAufljnLwqoP494mHeU5D
ppLMcSfw9HheR/J3NoimcJ8mvWe2/NOmtqxKFt0QYUiL3p0uqZUfclTUbIUEqzi3
v30lFh984aB91HgLQkl3dgqmCG/ggS7gy1W2BEQZtsaQHAW4v+psYAjMMMGpkcZV
vHjWffic3y+mVgClZ8PRaqkXQB/IjfuoSF/+VT6/kTNosmOXkvphd3je2ogE9Zn8
4r+ALaAlmaRLpBzvfDTyNAB2gUi4ar22JVa5VpF1y4G9SAlHkv6TdpnaTgfw4SKu
D3fqjSlYJ6DL7CRB+4BetPn2Al83CvuPXSMRF9iuikllRGHZfbs=
=zDwv
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm dts updates for v5.15
This introduces the MSM8226 platform and an initial dts for the Samsung
Galaxy S III Neo phone.
MSM8974 gains another UART and this is used to enable Bluetooth on the
Sony Xperia Z2 Tablet. Samsung Galaxy S5 gains regulator definitions for
audio and modem remoteprocs, effectively enabling these.
DSI clocks on APQ8064 are updates as the old legacy clock names are no
longer supported by the driver. And IPQ806x GMAC nodes gains AHB resets
wired up.
Lastly APQ8060 is converted to a SPDX header and the ethernet node is
updates in accordance with the binding.
* tag 'qcom-dts-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: add ahb reset to ipq806x-gmac
ARM: dts: qcom: Fix up APQ8060 DragonBoard license
ARM: dts: qcom: msm8974: castor: Add Bluetooth-related nodes
ARM: dts: qcom: msm8974: Add blsp2_uart7 for bluetooth on sirius
ARM: dts: qcom: Add initial DTS file for Samsung Galaxy S III Neo phone
dt-bindings: arm: qcom: Document MSM8226 SoC binding
ARM: dts: qcom: Add support for MSM8226 SoC
ARM: dts: qcom: apq8060: Correct Ethernet node name and drop bogus irq property
ARM: dts: qcom: apq8064: correct clock names
ARM: dts: qcom: msm8974-klte: Enable remote processors
Link: https://lore.kernel.org/r/20210816211957.579365-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is the main pull for v5.15, after the early pull request with
drm/scheduler conversion:
* New a6xx GPU support: a680 and 7c3
* dsi: 7nm phi, sc7280 support, test pattern generator support
* mdp4 fixes for older hw like the nexus7
* displayport fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs_tyanTeDGMH1X+Uf4wdyy7jYj-CinGXXVETiYOESahw@mail.gmail.com
1. MT8133 AAL support, adjust rdma fifo threshold formula.
2. Implement mmap as GEM object function.
3. Add support for MT8167.
4. Test component initialization earlier in the function mtk_drm_crtc_create.
5. CMDQ refinement.
-----BEGIN PGP SIGNATURE-----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=OMls
-----END PGP SIGNATURE-----
Merge tag 'mediatek-drm-next-5.15' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 5.15
1. MT8133 AAL support, adjust rdma fifo threshold formula.
2. Implement mmap as GEM object function.
3. Add support for MT8167.
4. Test component initialization earlier in the function mtk_drm_crtc_create.
5. CMDQ refinement.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210816232427.13368-1-chunkuang.hu@kernel.org
This removes the libbpf_api.rst file from the kernel documentation.
The intention for this file was to pull documentation from comments
above API functions in libbpf. However, due to limitations of the
kernel documentation system, this API documentation could not be
versioned, which is counterintuative to how users expect to use it.
There is also currently no doc comments, making this a blank page.
Once the kernel comment documentation is actually contributed, it
will still exist in the kernel repository, just in the code itself.
A seperate site is being spun up to generate documentaiton from those
comments in a way in which it can be versioned properly.
This also reconfigures the bpf documentation index page to make it
easier to sync to the previously mentioned documentaiton site.
Signed-off-by: Grant Seltzer <grantseltzer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210810020508.280639-1-grantseltzer@gmail.com
