IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 04fb918bf421b299feaee1006e82921d7d381f18 ]
[Why]
Some pixel clock values could cause HDMI TMDS SSCPs to be misaligned
between different HDMI lanes when using YCbCr420 10-bit pixel format.
BIOS functions for transmitter/encoder control take pixel clock in kHz
increments, whereas the function for setting the pixel clock is in 100Hz
increments. Setting pixel clock to a value that is not on a kHz boundary
will cause the issue.
[How]
Round pixel clock down to nearest kHz in 10/12-bpc cases.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17661ecf6a64eb11ae7f1108fe88686388b2acd5 ]
When smb client open file in ksmbd share with O_TRUNC, dos attribute
xattr is removed as well as data in file. This cause the FSCTL_SET_SPARSE
request from the client fails because ksmbd can't update the dos attribute
after setting ATTR_SPARSE_FILE. And this patch fix xfstests generic/469
test also.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b6670b03641ac308aaa6fa2e6f964ac993b5ea3 ]
When booting under KVM the following error messages are issued:
hypfs.7f5705: The hardware system does not support hypfs
hypfs.7a79f0: Initialization of hypfs failed with rc=-61
Demote the severity of first message from "error" to "info" and issue
the second message only in other error cases.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20220620094534.18967-1-jgross@suse.com
[arch/s390/hypfs/hypfs_diag.c changed description]
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66ba215cb51323e4e55e38fd5f250e0fae0cbc94 ]
Normal processing of ARP request (usually this is Ethernet broadcast
packet) coming to the host is looking like the following:
* the packet comes to arp_process() call and is passed through routing
procedure
* the request is put into the queue using pneigh_enqueue() if
corresponding ARP record is not local (common case for container
records on the host)
* the request is processed by timer (within 80 jiffies by default) and
ARP reply is sent from the same arp_process() using
NEIGH_CB(skb)->flags & LOCALLY_ENQUEUED condition (flag is set inside
pneigh_enqueue())
And here the problem comes. Linux kernel calls pneigh_queue_purge()
which destroys the whole queue of ARP requests on ANY network interface
start/stop event through __neigh_ifdown().
This is actually not a problem within the original world as network
interface start/stop was accessible to the host 'root' only, which
could do more destructive things. But the world is changed and there
are Linux containers available. Here container 'root' has an access
to this API and could be considered as untrusted user in the hosting
(container's) world.
Thus there is an attack vector to other containers on node when
container's root will endlessly start/stop interfaces. We have observed
similar situation on a real production node when docker container was
doing such activity and thus other containers on the node become not
accessible.
The patch proposed doing very simple thing. It drops only packets from
the same namespace in the pneigh_queue_purge() where network interface
state change is detected. This is enough to prevent the problem for the
whole node preserving original semantics of the code.
v2:
- do del_timer_sync() if queue is empty after pneigh_queue_purge()
v3:
- rebase to net tree
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@kernel.org>
Cc: Yajun Deng <yajun.deng@linux.dev>
Cc: Roopa Prabhu <roopa@nvidia.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
Cc: Konstantin Khorenko <khorenko@virtuozzo.com>
Cc: kernel@openvz.org
Cc: devel@openvz.org
Investigated-by: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe54833dc8d97ef387e86f7c80537d51c503ca75 ]
If share is not configured in smb.conf, smb2 tree connect should return
STATUS_BAD_NETWORK_NAME instead of STATUS_BAD_NETWORK_PATH.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2a93490201300a749ad261b5c5d05cb50179c44 ]
[Why]
After ODM clock off, optc underflow bit will be kept there always and clear not work.
We need to clear that before clock off.
[How]
Clear that if have when clock off.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Fudong Wang <Fudong.Wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84ef99c728079dfd21d6bc70b4c3e4af20602b3c ]
[Description]
Observed in stereomode that programming FLIP_LEFT_EYE
can cause hangs. Keep FLIP_ANY_FRAME in stereo mode so
the surface flip can take place before left or right eye
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0591183699fceeafb4c4141072d47775de83ecfb ]
[Why]
Reported from customer the checksum in AMD VSIF V3 is incorrect and
causing blank screen issue.
[How]
Fix the packet length issue on AMD HDMI VSIF V3.
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8de297dc046c180651c0500f8611663ae1c3828a ]
[why]
In some cases MPC tree bottom pipe ends up point to itself. This causes
iterating from top to bottom to hang the system in an infinite loop.
[how]
When looping to next MPC bottom pipe, check that the pointer is not same
as current to avoid infinite loop.
Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c75ed9f54ce8d349fee557f2b471a4d637ed2a6b ]
We usually do cleanup in reverse order of init. Currently in case of
error rz_ssi_release_dma_channels() done in the reverse order. This
patch improves error handling in rz_ssi_probe() error path.
While at it, use "goto cleanup" style to reduce code duplication.
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220728092612.38858-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42f86b1226a42bfc79a7125af435432ad4680a32 ]
In some cases xattr is too fragmented,
so we need to load it before writing.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 769030e11847c5412270c0726ff21d3a1f0a3131 ]
During log replay, at add_link(), we may increment the link count of
another inode that has a reference that conflicts with a new reference
for the inode currently being processed.
During log replay, at add_link(), we may drop (unlink) a reference from
some inode in the subvolume tree if that reference conflicts with a new
reference found in the log for the inode we are currently processing.
After the unlink, If the link count has decreased from 1 to 0, then we
increment the link count to prevent the inode from being deleted if it's
evicted by an iput() call, because we may have references to add to that
inode later on (and we will fixup its link count later during log replay).
However incrementing the link count from 0 to 1 triggers a warning:
$ cat fs/inode.c
(...)
void inc_nlink(struct inode *inode)
{
if (unlikely(inode->i_nlink == 0)) {
WARN_ON(!(inode->i_state & I_LINKABLE));
atomic_long_dec(&inode->i_sb->s_remove_count);
}
(...)
The I_LINKABLE flag is only set when creating an O_TMPFILE file, so it's
never set during log replay.
Most of the time, the warning isn't triggered even if we dropped the last
reference of the conflicting inode, and this is because:
1) The conflicting inode was previously marked for fixup, through a call
to link_to_fixup_dir(), which increments the inode's link count;
2) And the last iput() on the inode has not triggered eviction of the
inode, nor was eviction triggered after the iput(). So at add_link(),
even if we unlink the last reference of the inode, its link count ends
up being 1 and not 0.
So this means that if eviction is triggered after link_to_fixup_dir() is
called, at add_link() we will read the inode back from the subvolume tree
and have it with a correct link count, matching the number of references
it has on the subvolume tree. So if when we are at add_link() the inode
has exactly one reference only, its link count is 1, and after the unlink
its link count becomes 0.
So fix this by using set_nlink() instead of inc_nlink(), as the former
accepts a transition from 0 to 1 and it's what we use in other similar
contexts (like at link_to_fixup_dir().
Also make add_inode_ref() use set_nlink() instead of inc_nlink() to
bump the link count from 0 to 1.
The warning is actually harmless, but it may scare users. Josef also ran
into it recently.
CC: stable@vger.kernel.org # 5.1+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 313ab75399d0c7d0ebc718c545572c1b4d8d22ef ]
During log replay there is this pattern of running delayed items after
every inode unlink. To avoid repeating this several times, move the
logic into an helper function and use it instead of calling
btrfs_unlink_inode() followed by btrfs_run_delayed_items().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccae4a19c9140a34a0c5f0658812496dd8bbdeaf ]
Now that we log only dir index keys when logging a directory, we no longer
need to deal with dir item keys in the log replay code for replaying
directory deletes. This is also true for the case when we replay a log
tree created by a kernel that still logs dir items.
So remove the remaining code of the replay of directory deletes algorithm
that deals with dir item keys.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4467af8809299c12529b5c21481c1d44a3b209f9 ]
The root argument passed to btrfs_unlink_inode() and its callee,
__btrfs_unlink_inode(), always matches the root of the given directory and
the given inode. So remove the argument and make __btrfs_unlink_inode()
use the root of the directory.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0753ef66c34c1739580219dca664eda648164b7 ]
The commit 08f3dff799d4 (mmc: sdhci-of-dwcmshc: add rockchip platform
support") introduces the use of_device_get_match_data() to check for some
chips. Unfortunately, it also breaks the BlueField-3 FW, which uses ACPI.
To fix the problem, let's add the ACPI match data and the corresponding
quirks to re-enable the support for the BlueField-3 SoC.
Reviewed-by: David Woods <davwoods@nvidia.com>
Signed-off-by: Liming Sun <limings@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 08f3dff799d4 ("mmc: sdhci-of-dwcmshc: add rockchip platform support")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220809173742.178440-1-limings@nvidia.com
[Ulf: Clarified the commit message a bit]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86e1a8e1f9b555af342c53ae06284eeeab9a4263 ]
Prepare driver for rk3588 support by renaming the internal data
structures.
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20220504213251.264819-11-sebastian.reichel@collabora.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70f832206fe72e9998b46363e8e59e89b0b757bc ]
The reset function build in the SDHCI will not reset the logic
circuit related to the tuning function, which may cause data
reading errors. Resetting the complete SDHCI controller through
the reset controller fixes the issue.
Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
[rebase, use optional variant of reset getter]
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20220504213251.264819-10-sebastian.reichel@collabora.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc5d1692600613e72f32af60e27330fe0c79f4fe ]
Currently we don't clear MSDC interrupts when cqe off/disable, which led
to the data complete interrupt will be reserved for the next command.
If the next command with data transfer after cqe off/disable, we process
the CMD ready interrupt and trigger DMA start for data, but the data
complete interrupt is already exists, then SW assume that the data transfer
is complete, SW will trigger DMA stop, but the data may not be transmitted
yet or is transmitting, so we may encounter the following error:
mtk-msdc 11230000.mmc: CMD bus busy detected.
Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
Fixes: 88bd652b3c74 ("mmc: mediatek: command queue support")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220728080048.21336-1-wenbin.mei@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5a95c83ed1492c0f442b448b20c90c8faaf702b ]
Skip all further TLB invalidations once the device is wedged and
had been reset, as, on such cases, it can no longer process instructions
on the GPU and the user no longer has access to the TLB's in each engine.
So, an attempt to do a TLB cache invalidation will produce a timeout.
That helps to reduce the performance regression introduced by TLB
invalidate logic.
Cc: stable@vger.kernel.org
Fixes: 7938d61591d3 ("drm/i915: Flush TLBs before releasing backing store")
Signed-off-by: Chris Wilson <chris.p.wilson@intel.com>
Cc: Fei Yang <fei.yang@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5aa86564b9ec5fe7fe605c1dd7de76855401ed73.1658924372.git.mchehab@kernel.org
(cherry picked from commit be0366f168033374a93e4c43fdaa1a90ab905184)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d9a17651f3749e69890db57ca66e677dfee70829 upstream.
Add device id for the Sparco R383 Mod wheel.
Fix wheel info array length to match actual wheel count present in the array.
Signed-off-by: Michael Hübner <michaelh.95@t-online.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1c0cc9d11c665020cbeb80e660fb8929164407f4 upstream.
On an Asus G513QY, of the 5 bytes in a 0x5a report, only the first byte
is a meaningful keycode. The other bytes are zeroed out or hold garbage
from the last packet sent to the keyboard.
This patch fixes up the report descriptor for this event so that the
general hid code will only process 1 byte for keycodes, avoiding
spurious key events and unmapped Asus vendor usagepage code warnings.
Signed-off-by: Josh Kilmer <srjek2@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit adada3f4930ac084740ea340bd8e94028eba4f22 upstream.
Google Chromebooks use Chrome OS Embedded Controller Sensor Hub instead
of Sensor Hub Fusion and leaves MP2 uninitialized, which disables all
functionalities, even including the registers necessary for feature
detections.
The behavior was observed with Lenovo ThinkPad C13 Yoga.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3a47fa7b14c7d9613909a844aba27f99d3c58634 upstream.
Similar to the Surface Go devices, the Elantech touchscreen/digitizer in
the Lenovo Yoga C630 mistakenly reports the battery of the stylus, and
always reports an empty battery.
Apply the HID_BATTERY_QUIRK_IGNORE quirk to ignore this battery and
prevent the erroneous low battery warnings.
Signed-off-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2555283eb40df89945557273121e9393ef9b542b upstream.
anon_vma->degree tracks the combined number of child anon_vmas and VMAs
that use the anon_vma as their ->anon_vma.
anon_vma_clone() then assumes that for any anon_vma attached to
src->anon_vma_chain other than src->anon_vma, it is impossible for it to
be a leaf node of the VMA tree, meaning that for such VMAs ->degree is
elevated by 1 because of a child anon_vma, meaning that if ->degree
equals 1 there are no VMAs that use the anon_vma as their ->anon_vma.
This assumption is wrong because the ->degree optimization leads to leaf
nodes being abandoned on anon_vma_clone() - an existing anon_vma is
reused and no new parent-child relationship is created. So it is
possible to reuse an anon_vma for one VMA while it is still tied to
another VMA.
This is an issue because is_mergeable_anon_vma() and its callers assume
that if two VMAs have the same ->anon_vma, the list of anon_vmas
attached to the VMAs is guaranteed to be the same. When this assumption
is violated, vma_merge() can merge pages into a VMA that is not attached
to the corresponding anon_vma, leading to dangling page->mapping
pointers that will be dereferenced during rmap walks.
Fix it by separately tracking the number of child anon_vmas and the
number of VMAs using the anon_vma as their ->anon_vma.
Fixes: 7a3ef208e662 ("mm: prevent endless growth of anon_vma hierarchy")
Cc: stable@kernel.org
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 19f953e7435644b81332dd632ba1b2d80b1e37af upstream.
In `do_fb_ioctl()` of fbmem.c, if cmd is FBIOPUT_VSCREENINFO, var will be
copied from user, then go through `fb_set_var()` and
`info->fbops->fb_check_var()` which could may be `pm2fb_check_var()`.
Along the path, `var->pixclock` won't be modified. This function checks
whether reciprocal of `var->pixclock` is too high. If `var->pixclock` is
zero, there will be a divide by zero error. So, it is necessary to check
whether denominator is zero to avoid crash. As this bug is found by
Syzkaller, logs are listed below.
divide error in pm2fb_check_var
Call Trace:
<TASK>
fb_set_var+0x367/0xeb0 drivers/video/fbdev/core/fbmem.c:1015
do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1110
fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1189
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Letu Ren <fantasquex@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2a0133723f9ebeb751cfce19f74ec07e108bef1f upstream.
Syzkaller reports refcount bug as follows:
------------[ cut here ]------------
refcount_t: saturated; leaking memory.
WARNING: CPU: 1 PID: 3605 at lib/refcount.c:19 refcount_warn_saturate+0xf4/0x1e0 lib/refcount.c:19
Modules linked in:
CPU: 1 PID: 3605 Comm: syz-executor208 Not tainted 5.18.0-syzkaller-03023-g7e062cda7d90 #0
<TASK>
__refcount_add_not_zero include/linux/refcount.h:163 [inline]
__refcount_inc_not_zero include/linux/refcount.h:227 [inline]
refcount_inc_not_zero include/linux/refcount.h:245 [inline]
sk_psock_get+0x3bc/0x410 include/linux/skmsg.h:439
tls_data_ready+0x6d/0x1b0 net/tls/tls_sw.c:2091
tcp_data_ready+0x106/0x520 net/ipv4/tcp_input.c:4983
tcp_data_queue+0x25f2/0x4c90 net/ipv4/tcp_input.c:5057
tcp_rcv_state_process+0x1774/0x4e80 net/ipv4/tcp_input.c:6659
tcp_v4_do_rcv+0x339/0x980 net/ipv4/tcp_ipv4.c:1682
sk_backlog_rcv include/net/sock.h:1061 [inline]
__release_sock+0x134/0x3b0 net/core/sock.c:2849
release_sock+0x54/0x1b0 net/core/sock.c:3404
inet_shutdown+0x1e0/0x430 net/ipv4/af_inet.c:909
__sys_shutdown_sock net/socket.c:2331 [inline]
__sys_shutdown_sock net/socket.c:2325 [inline]
__sys_shutdown+0xf1/0x1b0 net/socket.c:2343
__do_sys_shutdown net/socket.c:2351 [inline]
__se_sys_shutdown net/socket.c:2349 [inline]
__x64_sys_shutdown+0x50/0x70 net/socket.c:2349
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK>
During SMC fallback process in connect syscall, kernel will
replaces TCP with SMC. In order to forward wakeup
smc socket waitqueue after fallback, kernel will sets
clcsk->sk_user_data to origin smc socket in
smc_fback_replace_callbacks().
Later, in shutdown syscall, kernel will calls
sk_psock_get(), which treats the clcsk->sk_user_data
as psock type, triggering the refcnt warning.
So, the root cause is that smc and psock, both will use
sk_user_data field. So they will mismatch this field
easily.
This patch solves it by using another bit(defined as
SK_USER_DATA_PSOCK) in PTRMASK, to mark whether
sk_user_data points to a psock object or not.
This patch depends on a PTRMASK introduced in commit f1ff5ce2cd5e
("net, sk_msg: Clear sk_user_data pointer on clone if tagged").
For there will possibly be more flags in the sk_user_data field,
this patch also refactor sk_user_data flags code to be more generic
to improve its maintainability.
Reported-and-tested-by: syzbot+5f26f85569bd179c18ce@syzkaller.appspotmail.com
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 945a9a8e448b65bec055d37eba58f711b39f66f0 upstream.
The error handling code in pvr2_hdw_create forgets to unregister the
v4l2 device. When pvr2_hdw_create returns back to pvr2_context_create,
it calls pvr2_context_destroy to destroy context, but mp->hdw is NULL,
which leads to that pvr2_hdw_destroy directly returns.
Fix this by adding v4l2_device_unregister to decrease the refcount of
usb interface.
Reported-by: syzbot+77b432d57c4791183ed4@syzkaller.appspotmail.com
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cd11d1a6114bd4bc6450ae59f6e110ec47362126 upstream.
It is possible for a malicious device to forgo submitting a Feature
Report. The HID Steam driver presently makes no prevision for this
and de-references the 'struct hid_report' pointer obtained from the
HID devices without first checking its validity. Let's change that.
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Fixes: c164d6abf3841 ("HID: add driver for Valve Steam Controller")
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit c968af565ca6c18b2f2af60fc1493c8db15abb3c which is
commit 8795e182b02dc87e343c79e73af6b8b7f9c5e635 upstream.
It is reported to cause problems, so drop it from the stable trees for
now until it gets sorted out.
Link: https://lore.kernel.org/r/47b775c5-57fa-5edf-b59e-8a9041ffbee7@candelatech.com
Reported-by: Ben Greear <greearb@candelatech.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Pali Rohár <pali@kernel.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Yao Hongbo <yaohongbo@linux.alibaba.com>
Cc: Naveen Naidu <naveennaidu479@gmail.com>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 23a0cb8e3225122496bfa79172005c587c2d64bf upstream.
When building an external module, if users don't need to separate the
compilation output and source code, they run the following command:
"make -C $(LINUX_SRC_DIR) M=$(PWD)". At this point, "$(KBUILD_EXTMOD)"
and "$(src)" are the same.
If they need to separate them, they run "make -C $(KERNEL_SRC_DIR)
O=$(KERNEL_OUT_DIR) M=$(OUT_DIR) src=$(PWD)". Before running the
command, they need to copy "Kbuild" or "Makefile" to "$(OUT_DIR)" to
prevent compilation failure.
So the kernel should change the included path to avoid the copy operation.
Signed-off-by: Jing Leng <jleng@ambarella.com>
[masahiro: I do not think "M=$(OUT_DIR) src=$(PWD)" is the official way,
but this patch is a nice clean up anyway.]
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ upstream commmit 791f3465c4afde02d7f16cf7424ca87070b69396 ]
Fixes a problem described in 50252e4b5e989
("aio: fix use-after-free due to missing POLLFREE handling")
and copies the approach used there.
In short, we have to forcibly eject a poll entry when we meet POLLFREE.
We can't rely on io_poll_get_ownership() as can't wait for potentially
running tw handlers, so we use the fact that wqs are RCU freed. See
Eric's patch and comments for more details.
Reported-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20211209010455.42744-6-ebiggers@kernel.org
Reported-and-tested-by: syzbot+5426c7ed6868c705ca14@syzkaller.appspotmail.com
Fixes: 221c5eb233823 ("io_uring: add support for IORING_OP_POLL")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/4ed56b6f548f7ea337603a82315750449412748a.1642161259.git.asml.silence@gmail.com
[axboe: drop non-functional change from patch]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[pavel: backport]
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ upstream commmit 9d2ad2947a53abf5e5e6527a9eeed50a3a4cbc72 ]
Leaving ip.error set when a request was punted to task_work execution is
problematic, don't forget to clear it.
Fixes: aa43477b04025 ("io_uring: poll rework")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/a6c84ef4182c6962380aebe11b35bdcb25b0ccfb.1655852245.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[pavel: backport]
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ upstream commmit e2c0cb7c0cc72939b61a7efee376206725796625 ]
The previous commit:
1bc84c40088 ("io_uring: remove poll entry from list when canceling all")
removed a potential overflow condition for the poll references. They
are currently limited to 20-bits, even if we have 31-bits available. The
upper bit is used to mark for cancelation.
Bump the poll ref space to 31-bits, making that kind of situation much
harder to trigger in general. We'll separately add overflow checking
and handling.
Fixes: aa43477b0402 ("io_uring: poll rework")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[pavel: backport]
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ upstream commmit 61bc84c4008812d784c398cfb54118c1ba396dfc ]
When the ring is exiting, as part of the shutdown, poll requests are
removed. But io_poll_remove_all() does not remove entries when finding
them, and since completions are done out-of-band, we can find and remove
the same entry multiple times.
We do guard the poll execution by poll ownership, but that does not
exclude us from reissuing a new one once the previous removal ownership
goes away.
This can race with poll execution as well, where we then end up seeing
req->apoll be NULL because a previous task_work requeue finished the
request.
Remove the poll entry when we find it and get ownership of it. This
prevents multiple invocations from finding it.
Fixes: aa43477b0402 ("io_uring: poll rework")
Reported-by: Dylan Yudaken <dylany@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[pavel: backport]
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ upstream commmit aa43477b040251f451db0d844073ac00a8ab66ee ]
It's not possible to go forward with the current state of io_uring
polling, we need a more straightforward and easier synchronisation.
There are a lot of problems with how it is at the moment, including
missing events on rewait.
The main idea here is to introduce a notion of request ownership while
polling, no one but the owner can modify any part but ->poll_refs of
struct io_kiocb, that grants us protection against all sorts of races.
Main users of such exclusivity are poll task_work handler, so before
queueing a tw one should have/acquire ownership, which will be handed
off to the tw handler.
The other user is __io_arm_poll_handler() do initial poll arming. It
starts taking the ownership, so tw handlers won't be run until it's
released later in the function after vfs_poll. note: also prevents
races in __io_queue_proc().
Poll wake/etc. may not be able to get ownership, then they need to
increase the poll refcount and the task_work should notice it and retry
if necessary, see io_poll_check_events().
There is also IO_POLL_CANCEL_FLAG flag to notify that we want to kill
request.
It makes cancellations more reliable, enables double multishot polling,
fixes double poll rewait, fixes missing poll events and fixes another
bunch of races.
Even though it adds some overhead for new refcounting, and there are a
couple of nice performance wins:
- no req->refs refcounting for poll requests anymore
- if the data is already there (once measured for some test to be 1-2%
of all apoll requests), it removes it doesn't add atomics and removes
spin_lock/unlock pair.
- works well with multishots, we don't do remove from queue / add to
queue for each new poll event.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/6b652927c77ed9580ea4330ac5612f0e0848c946.1639605189.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[pavel: backport]
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ upstream commmit ab1dab960b8352cee082db0f8a54dc92a948bfd7 ]
With IORING_FEAT_FAST_POLL in place, io_put_req_find_next() for poll
requests doesn't make much sense, and in any case re-adding it
shouldn't be a problem considering batching in tctx_task_work(). We can
remove it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/15699682bf81610ec901d4e79d6da64baa9f70be.1639605189.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[pavel: backport]
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ upstream commmit 913a571affedd17239c4d4ea90c8874b32fc2191 ]
Split io_cqring_fill_event() into a couple of more targeted functions.
The first on is io_fill_cqe_aux() for completions that are not
associated with request completions and doing the ->cq_extra accounting.
Examples are additional CQEs from multishot poll and rsrc notifications.
The second is io_fill_cqe_req(), should be called when it's a normal
request completion. Nothing more to it at the moment, will be used in
later patches.
The last one is inlined __io_fill_cqe() for a finer grained control,
should be used with caution and in hottest places.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/59a9117a4a44fc9efcf04b3afa51e0d080f5943c.1636559119.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[pavel: backport]
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
