IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 5f1aa51c7a1eef1c5a60b8334e32c89904964245 ]
Booting a kernel results in the kernel warning us about the following
PPI interrupts configuration:
[ 0.105127] smp: Bringing up secondary CPUs ...
[ 0.110545] GIC: PPI11 is secure or misconfigured
[ 0.110551] GIC: PPI13 is secure or misconfigured
Fix this by using the appropriate edge configuration for PPI11 and
PPI13, this is similar to what was fixed for Northstar (BCM5301X) in
commit 0e34079cd1f6 ("ARM: dts: BCM5301X: Correct GIC_PPI interrupt
flags").
Fixes: 7b2e987de207 ("ARM: NSP: add minimal Northstar Plus device tree")
Fixes: 1a9d53cabaf4 ("ARM: dts: NSP: Add TWD Support to DT")
Acked-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 77416ab35f5712382e5a792bfa1736ceb70d5bbb ]
The AHCI controller is currently enabled for all of these boards:
bcm958623hr and bcm958625hr would result in a hard hang on boot that we
cannot get rid of. Since this does not appear to have an easy and simple
fix, just disable the AHCI controller for now until this gets resolved.
Fixes: 70725d6e97ac ("ARM: dts: NSP: Enable SATA on bcm958625hr")
Fixes: d454c3762437 ("ARM: dts: NSP: Add new DT file for bcm958623hr")
Acked-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0232d2cd7aa8e1b810fe84fb4059a0bd1eabe2ba ]
When getting HW rfkill we get stop_device being called from
two paths.
One path is the IRQ calling stop device, and updating op
mode and stack.
As a result, cfg80211 is running rfkill sync work that shuts
down all devices (second path).
In the second path, we eventually get to iwl_mvm_stop_device
which calls iwl_fw_dump_conf_clear->iwl_fw_dbg_stop_recording,
that access periphery registers.
The device may be stopped at this point from the first path,
which will result with a failure to access those registers.
Simply checking for the trans status is insufficient, since
the race will still exist, only minimized.
Instead, move the stop from iwl_fw_dump_conf_clear (which is
getting called only from stop path) to the transport stop
device function, where the access is always safe.
This has the added value, of actually stopping dbgc before
stopping device even when the stop is initiated from the
transport.
Fixes: 1efc3843a4ee ("iwlwifi: stop dbgc recording before stopping DMA")
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d1b275ffec459c5ae12b5c7086c84175696e5a9f ]
The MONITOR type is missing in the interface type switch.
Add it.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 727535903bea924c4f73abb202c4b3e85fff0ca4 ]
_vreg_ is being dereferenced before it is null checked, hence there is a
potential null pointer dereference.
Fix this by moving the pointer dereference after _vreg_ has been null
checked.
This issue was detected with the help of Coccinelle.
Fixes: aa4976130934 ("ufs: Add regulator enable support")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e4717292ddebcfe231651b5aff9fa19ca158d178 ]
As part of the scsi EH path, aacraid performs a reinitialization of the
adapter, which encompass freeing resources and IRQs, NULLifying lots of
pointers, and then initialize it all over again. We've identified a
problem during the free IRQ portion of this path if CONFIG_DEBUG_SHIRQ
is enabled on kernel config file.
Happens that, in case this flag was set, right after free_irq()
effectively clears the interrupt, it checks if it was requested as
IRQF_SHARED. In positive case, it performs another call to the IRQ
handler on driver. Problem is: since aacraid currently free some
resources *before* freeing the IRQ, once free_irq() path calls the
handler again (due to CONFIG_DEBUG_SHIRQ), aacraid crashes due to NULL
pointer dereference with the following trace:
aac_src_intr_message+0xf8/0x740 [aacraid]
__free_irq+0x33c/0x4a0
free_irq+0x78/0xb0
aac_free_irq+0x13c/0x150 [aacraid]
aac_reset_adapter+0x2e8/0x970 [aacraid]
aac_eh_reset+0x3a8/0x5d0 [aacraid]
scsi_try_host_reset+0x74/0x180
scsi_eh_ready_devs+0xc70/0x1510
scsi_error_handler+0x624/0xa20
This patch prevents the crash by changing the order of the
deinitialization in this path of aacraid: first we clear the IRQ, then
we free other resources. No functional change intended.
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Reviewed-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0e18dd12064e07519f7cbff4149ca7fff620cbed ]
perf with --namespace key leaks various memory objects including namespaces
4.14.0+
pid_namespace 1 12 2568 12 8
user_namespace 1 39 824 39 8
net_namespace 1 5 6272 5 8
This happen because perf_fill_ns_link_info() struct patch ns_path:
during initialization ns_path incremented counters on related mnt and dentry,
but without lost path_put nobody decremented them back.
Leaked dentry is name of related namespace,
and its leak does not allow to free unused namespace.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: commit e422267322cd ("perf: Add PERF_RECORD_NAMESPACES to include namespaces related info")
Link: http://lkml.kernel.org/r/c510711b-3904-e5e1-d296-61273d21118d@virtuozzo.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 373b0589dc8d58bc09c9a28d03611ae4fb216057 ]
Once the inode item writeback errors is already fixed, it's time to fix the same
problem in dquot code.
Although there were no reports of users hitting this bug in dquot code (at least
none I've seen), the bug is there and I was already planning to fix it when the
correct approach to fix the inodes part was decided.
This patch aims to fix the same problem in dquot code, regarding failed buffers
being unable to be resubmitted once they are flush locked.
Tested with the recently test-case sent to fstests list by Hou Tao.
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 22a6c83777ac7c17d6c63891beeeac24cf5da450 ]
Fix some complaints from the UBSAN about signed integer addition overflows.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 499ec0ed5eb2f6a7fcaab2dd66ffc5993484bda9 ]
The new backlight code causes a link failure when backlight
support itself is disabled:
drivers/gpu/drm/omapdrm/displays/panel-dpi.o: In function `panel_dpi_probe_of':
panel-dpi.c:(.text+0x35c): undefined reference to `of_find_backlight_by_node'
This adds a Kconfig dependency like we have for the other OMAP
display targets.
Fixes: 39135a305a0f ("drm/omap: displays: panel-dpi: Support for handling backlight devices")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8677b1ac2db021ab30bb1fa34f1e56ebe0051ec3 ]
If we don't find a matching device node, we must free the memory allocated
in 'omap_dmm' a few lines above.
Fixes: 7cb0d6c17b96 ("drm/omap: fix TILER on OMAP5")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9217c1abbc145a77d65c476cf2004a3df02104c7 ]
First four bytes should go to DP0_AUXWDATA0. Due to bug if
len > 4 first four bytes was writen to DP0_AUXWDATA1 and all
data get shifted by 4 bytes. Fix it.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-6-git-send-email-andrey.gusakov@cogentembedded.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 66d1c3b94d5d59e4325e61a78d520f92c043d645 ]
Fields in HTIM01 and HTIM02 regs should be even.
Recomended thresh_dly value is max_tu_symbol.
Remove set of VPCTRL0.VSDELAY as it is related to DSI input
interface. Currently driver supports only DPI.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-5-git-send-email-andrey.gusakov@cogentembedded.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cffd2b16c01c3431a7a7dd62e722af33490fc436 ]
Do not fail data rates higher than 2.7 and more than 2 lanes.
Try to fall back to 2.7Gbps and 2 lanes.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-2-git-send-email-andrey.gusakov@cogentembedded.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dbb58bfd9ae6c885b2ca001a9a5ab8b881fb4ba9 ]
The panel_bridge bridge attaches to the panel's OF node, not the
lvds-encoder's node. Put in a little no-op bridge of our own so that
our consumers can still find a bridge where they expect.
This also fixes an unintended unregistration and leak of the
panel-bridge on module remove.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 13dfc0540a57 ("drm/bridge: Refactor out the panel wrapper from the lvds-encoder bri
dge.")
Tested-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114191647.22207-1-eric@anholt.net
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bde5f6bc68db51128f875a756e9082a6c6ff7b4c ]
kmemleak_scan() will scan struct page for each node and it can be really
large and resulting in a soft lockup. We have seen a soft lockup when
do scan while compile kernel:
watchdog: BUG: soft lockup - CPU#53 stuck for 22s! [bash:10287]
[...]
Call Trace:
kmemleak_scan+0x21a/0x4c0
kmemleak_write+0x312/0x350
full_proxy_write+0x5a/0xa0
__vfs_write+0x33/0x150
vfs_write+0xad/0x1a0
SyS_write+0x52/0xc0
do_syscall_64+0x61/0x1a0
entry_SYSCALL64_slow_path+0x25/0x25
Fix this by adding cond_resched every MAX_SCAN_SIZE.
Link: http://lkml.kernel.org/r/1511439788-20099-1-git-send-email-xieyisheng1@huawei.com
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 95a87982541932503d3f59aba4c30b0bde0a6294 ]
When cross-compiling, fadd2line should use the binary tool used for the
target system, rather than that of the host.
Link: http://lkml.kernel.org/r/20171121092911.GA150711@sofia
Signed-off-by: Liu Changcheng <changcheng.liu@intel.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: NeilBrown <neilb@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 88bc0ede8d35edc969350852894dc864a2dc1859 ]
register_shrinker() might return -ENOMEM error since Linux 3.12.
Call panic() as with other failure checks in this function if
register_shrinker() failed.
Fixes: 1d3d4437eae1 ("vmscan: per-node deferred work")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Jan Kara <jack@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 15bfe05c8d6386f1a90e9340d15336e85e32aad6 ]
On 64-bit (e.g. powerpc64/allmodconfig):
drivers/net/ethernet/xilinx/ll_temac_main.c: In function 'temac_start_xmit_done':
drivers/net/ethernet/xilinx/ll_temac_main.c:633:22: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
dev_kfree_skb_irq((struct sk_buff *)cur_p->app4);
^
cdmac_bd.app4 is u32, so it is too small to hold a kernel pointer.
Note that several other fields in struct cdmac_bd are also too small to
hold physical addresses on 64-bit platforms.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6edc6910ba4cd6eab309263539c8f09b8ad772bf ]
Never try to move pinned BOs during CS.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d210a9874b8f6166579408131cb74495caff1958 ]
percpu_counter_init failure path doesn't clean up &btp->bt_lru list.
Call list_lru_destroy in that error path. Similarly register_shrinker
error path is not handled.
While it is unlikely to trigger these error path, it is not impossible
especially the later might fail with large NUMAs. Let's handle the
failure to make the code more robust.
Noticed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7e5dd57ef3081ff6c03908d786ed5087f6fbb7ae ]
Following condition which will cause NULL pointer dereference will
occur in nvme_free_host_mem() when it tries to remove pci device via
nvme_remove() especially after a failure of host memory allocation for HMB.
"(host_mem_descs == NULL) && (nr_host_mem_descs != 0)"
It's because __nr_host_mem_descs__ is not cleared to 0 unlike
__host_mem_descs__ is so.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ea37d5998b50a72b9045ba60a132eeb20e1c4230 ]
Under some circumstances, an incremental send operation can issue wrong
paths for unlink commands related to files that have multiple hard links
and some (or all) of those links were renamed between the parent and send
snapshots. Consider the following example:
Parent snapshot
. (ino 256)
|---- a/ (ino 257)
| |---- b/ (ino 259)
| | |---- c/ (ino 260)
| | |---- f2 (ino 261)
| |
| |---- f2l1 (ino 261)
|
|---- d/ (ino 262)
|---- f1l1_2 (ino 258)
|---- f2l2 (ino 261)
|---- f1_2 (ino 258)
Send snapshot
. (ino 256)
|---- a/ (ino 257)
| |---- f2l1/ (ino 263)
| |---- b2/ (ino 259)
| |---- c/ (ino 260)
| | |---- d3 (ino 262)
| | |---- f1l1_2 (ino 258)
| | |---- f2l2_2 (ino 261)
| | |---- f1_2 (ino 258)
| |
| |---- f2 (ino 261)
| |---- f1l2 (ino 258)
|
|---- d (ino 261)
When computing the incremental send stream the following steps happen:
1) When processing inode 261, a rename operation is issued that renames
inode 262, which currently as a path of "d", to an orphan name of
"o262-7-0". This is done because in the send snapshot, inode 261 has
of its hard links with a path of "d" as well.
2) Two link operations are issued that create the new hard links for
inode 261, whose names are "d" and "f2l2_2", at paths "/" and
"o262-7-0/" respectively.
3) Still while processing inode 261, unlink operations are issued to
remove the old hard links of inode 261, with names "f2l1" and "f2l2",
at paths "a/" and "d/". However path "d/" does not correspond anymore
to the directory inode 262 but corresponds instead to a hard link of
inode 261 (link command issued in the previous step). This makes the
receiver fail with a ENOTDIR error when attempting the unlink
operation.
The problem happens because before sending the unlink operation, we failed
to detect that inode 262 was one of ancestors for inode 261 in the parent
snapshot, and therefore we didn't recompute the path for inode 262 before
issuing the unlink operation for the link named "f2l2" of inode 262. The
detection failed because the function "is_ancestor()" only follows the
first hard link it finds for an inode instead of all of its hard links
(as it was originally created for being used with directories only, for
which only one hard link exists). So fix this by making "is_ancestor()"
follow all hard links of the input inode.
A test case for fstests follows soon.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dea521a2b9f96e905fa2bb2f95e23ec00c2ec436 ]
Error code returned by 'bnxt_read_sfp_module_eeprom_info()' is handled a
few lines above when reading the A0 portion of the EEPROM.
The same should be done when reading the A2 portion of the EEPROM.
In order to correctly propagate an error, update 'rc' in this 2nd call as
well, otherwise 0 (success) is returned.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 952b6b3b07877419386e719ff20917170e1ce684 ]
The Marvell 10G PHY driver supports different hardware revisions, which
have their bits 3..0 differing. To get the correct revision number these
bits should be ignored. This patch fixes this by using the already
defined MARVELL_PHY_ID_MASK (0xfffffff0) instead of the custom
0xffffffff mask.
Fixes: 20b2af32ff3f ("net: phy: add Marvell Alaska X 88X3310 10Gigabit PHY support")
Suggested-by: Yan Markman <ymarkman@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ba2d8d887d962c2f790e6dc01b2fd25b4608720b ]
When an allocation in the txq_init path fails, the allocated buffers
end-up being freed twice: in the txq_init error path, and in txq_deinit.
This lead to issues as txq_deinit would work on already freed memory
regions:
kernel BUG at mm/slub.c:3915!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
This patch fixes this by removing the txq_init own error path, as the
txq_deinit function is always called on errors. This was introduced by
TSO as way more buffers are allocated.
Fixes: 186cd4d4e414 ("net: mvpp2: software tso support")
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1a6152d36dee08da2be2a3030dceb45ef680460a ]
In commit 6184fc0b8dd7 ("quota: Propagate error from ->acquire_dquot()"),
we have propagated error from __dquot_initialize to caller, but we forgot
to handle such error in add_dquot_ref(), so, currently, during quota
accounting information initialization flow, if we failed for some of
inodes, we just ignore such error, and do account for others, which is
not a good implementation.
In this patch, we choose to let user be aware of such error, so after
turning on quota successfully, we can make sure all inodes disk usage
can be accounted, which will be more reasonable.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bd467e4eababe4c04272c1e646f066db02734c79 ]
Power values in the 100s of watt range can easily blow past
32bit math limits when processing everything in microwatts.
Use 64bit math instead to avoid these issues on common 32bit ARM
BMC platforms.
Fixes: 442aba78728e ("hwmon: PMBus device driver")
Signed-off-by: Robert Lippert <rlippert@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 81833de1a46edce9ca20cfe079872ac1c20ef359 ]
restart_grace() uses hardcoded init_net.
It can cause to "list_add double add" in following scenario:
1) nfsd and lockd was started in several net namespaces
2) nfsd in init_net was stopped (lockd was not stopped because
it have users from another net namespaces)
3) lockd got signal, called restart_grace() -> set_grace_period()
and enabled lock_manager in hardcoded init_net.
4) nfsd in init_net is started again,
its lockd_up() calls set_grace_period() and tries to add
lock_manager into init_net 2nd time.
Jeff Layton suggest:
"Make it safe to call locks_start_grace multiple times on the same
lock_manager. If it's already on the global grace_list, then don't try
to add it again. (But we don't intentionally add twice, so for now we
WARN about that case.)
With this change, we also need to ensure that the nfsd4 lock manager
initializes the list before we call locks_start_grace. While we're at
it, move the rest of the nfsd_net initialization into
nfs4_state_create_net. I see no reason to have it spread over two
functions like it is today."
Suggested patch was updated to generate warning in described situation.
Suggested-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6b18dd1c03e07262ea0866084856b2a3c5ba8d09 ]
lockd_inet[6]addr_event use nlmsvc_rqst without taken nlmsvc_mutex,
nlmsvc_rqst can be changed during execution of notifiers and crash the host.
Patch enables access to nlmsvc_rqst only when it was correctly initialized
and delays its cleanup until notifiers are no longer in use.
Note that nlmsvc_rqst can be temporally set to ERR_PTR, so the "if
(nlmsvc_rqst)" check in notifiers is insufficient on its own.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Tested-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ae254dac721d44c0bfebe2795df87459e2e88219 ]
Prevent the use of the closed (invalid) special stateid by clients.
Signed-off-by: Andrew Elble <aweits@rit.edu>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9271d7e509c1bfc0b9a418caec29ec8d1ac38270 ]
After taking the stateid st_mutex, we want to know that the stateid
still represents valid state before performing any non-idempotent
actions.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5b5971df3bc2775107ddad164018a8a8db633b81 ]
v2:
* Replace busy wait with wait_event()/wake_up_all()
* Cannot garantee that at the time xennet_remove is called, the
xen_netback state will not be XenbusStateClosed, so added a
condition for that
* There's a small chance for the xen_netback state is
XenbusStateUnknown by the time the xen_netfront switches to Closed,
so added a condition for that.
When unloading module xen_netfront from guest, dmesg would output
warning messages like below:
[ 105.236836] xen:grant_table: WARNING: g.e. 0x903 still in use!
[ 105.236839] deferring g.e. 0x903 (pfn 0x35805)
This problem relies on netfront and netback being out of sync. By the time
netfront revokes the g.e.'s netback didn't have enough time to free all of
them, hence displaying the warnings on dmesg.
The trick here is to make netfront to wait until netback frees all the g.e.'s
and only then continue to cleanup for the module removal, and this is done by
manipulating both device states.
Signed-off-by: Eduardo Otubo <otubo@redhat.com>
Acked-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 66a7c84d677e8e4a5a2ef4afdb9bd52e1399a866 ]
Currently when an error occurs devinfo is still allocated but is
unused when the error exit paths break out of the for-loop. Fix
this by kfree'ing devinfo to avoid the leak.
Detected by CoverityScan, CID#1416590 ("Resource Leak")
Fixes: 4124c4eba402 ("i2c: allow attaching IRQ resources to i2c_board_info")
Fixes: 0daaf99d8424 ("i2c: copy device properties when using i2c_register_board_info()")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 509955823cc9cc225c05673b1b83d70ca70c5c60 ]
As part of testing log recovery with dm_log_writes, Amir Goldstein
discovered an error in the deferred ops recovery that lead to corruption
of the filesystem metadata if a reflink+rmap filesystem happened to shut
down midway through a CoW remap:
"This is what happens [after failed log recovery]:
"Phase 1 - find and verify superblock...
"Phase 2 - using internal log
" - zero log...
" - scan filesystem freespace and inode maps...
" - found root inode chunk
"Phase 3 - for each AG...
" - scan (but don't clear) agi unlinked lists...
" - process known inodes and perform inode discovery...
" - agno = 0
"data fork in regular inode 134 claims CoW block 376
"correcting nextents for inode 134
"bad data fork in inode 134
"would have cleared inode 134"
Hou Tao dissected the log contents of exactly such a crash:
"According to the implementation of xfs_defer_finish(), these ops should
be completed in the following sequence:
"Have been done:
"(1) CUI: Oper (160)
"(2) BUI: Oper (161)
"(3) CUD: Oper (194), for CUI Oper (160)
"(4) RUI A: Oper (197), free rmap [0x155, 2, -9]
"Should be done:
"(5) BUD: for BUI Oper (161)
"(6) RUI B: add rmap [0x155, 2, 137]
"(7) RUD: for RUI A
"(8) RUD: for RUI B
"Actually be done by xlog_recover_process_intents()
"(5) BUD: for BUI Oper (161)
"(6) RUI B: add rmap [0x155, 2, 137]
"(7) RUD: for RUI B
"(8) RUD: for RUI A
"So the rmap entry [0x155, 2, -9] for COW should be freed firstly,
then a new rmap entry [0x155, 2, 137] will be added. However, as we can see
from the log record in post_mount.log (generated after umount) and the trace
print, the new rmap entry [0x155, 2, 137] are added firstly, then the rmap
entry [0x155, 2, -9] are freed."
When reconstructing the internal log state from the log items found on
disk, it's required that deferred ops replay in exactly the same order
that they would have had the filesystem not gone down. However,
replaying unfinished deferred ops can create /more/ deferred ops. These
new deferred ops are finished in the wrong order. This causes fs
corruption and replay crashes, so let's create a single defer_ops to
handle the subsequent ops created during replay, then use one single
transaction at the end of log recovery to ensure that everything is
replayed in the same order as they're supposed to be.
Reported-by: Amir Goldstein <amir73il@gmail.com>
Analyzed-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 98c4f78dcdd8cec112d1cbc5e9a792ee6e5ab7a6 ]
In xfs_ifree, we reset the data/attr forks to extents format without
bothering to free any inline data buffer that might still be around
after all the blocks have been truncated off the file. Prior to commit
43518812d2 ("xfs: remove support for inlining data/extents into the
inode fork") nobody noticed because the leftover inline data after
truncation was small enough to fit inside the inline buffer inside the
fork itself.
However, now that we've removed the inline buffer, we /always/ have to
free the inline data buffer or else we leak them like crazy. This test
was found by turning on kmemleak for generic/001 or generic/388.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 20b7035c66bacc909ae3ffe92c1a1ea7db99fe4f ]
KVM API says for the signal mask you set via KVM_SET_SIGNAL_MASK, that
"any unblocked signal received [...] will cause KVM_RUN to return with
-EINTR" and that "the signal will only be delivered if not blocked by
the original signal mask".
This, however, is only true, when the calling task has a signal handler
registered for a signal. If not, signal evaluation is short-circuited for
SIG_IGN and SIG_DFL, and the signal is either ignored without KVM_RUN
returning or the whole process is terminated.
Make KVM_SET_SIGNAL_MASK behave as advertised by utilizing logic similar
to that in do_sigtimedwait() to avoid short-circuiting of signals.
Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ebb70442cdd4872260c2415929c456be3562da82 ]
Xfstests btrfs/146 revealed this corruption,
[ 58.138831] Buffer I/O error on dev dm-0, logical block 2621424, async page read
[ 58.151233] BTRFS error (device sdf): bdev /dev/mapper/error-test errs: wr 1, rd 0, flush 0, corrupt 0, gen 0
[ 58.152403] list_add corruption. prev->next should be next (ffff88005e6775d8), but was ffffc9000189be88. (prev=ffffc9000189be88).
[ 58.153518] ------------[ cut here ]------------
[ 58.153892] WARNING: CPU: 1 PID: 1287 at lib/list_debug.c:31 __list_add_valid+0x169/0x1f0
...
[ 58.157379] RIP: 0010:__list_add_valid+0x169/0x1f0
...
[ 58.161956] Call Trace:
[ 58.162264] btrfs_log_inode_parent+0x5bd/0xfb0 [btrfs]
[ 58.163583] btrfs_log_dentry_safe+0x60/0x80 [btrfs]
[ 58.164003] btrfs_sync_file+0x4c2/0x6f0 [btrfs]
[ 58.164393] vfs_fsync_range+0x5f/0xd0
[ 58.164898] do_fsync+0x5a/0x90
[ 58.165170] SyS_fsync+0x10/0x20
[ 58.165395] entry_SYSCALL_64_fastpath+0x1f/0xbe
...
It turns out that we could record btrfs_log_ctx:io_err in
log_one_extents when IO fails, but make log_one_extents() return '0'
instead of -EIO, so the IO error is not acknowledged by the callers,
i.e. btrfs_log_inode_parent(), which would remove btrfs_log_ctx:list
from list head 'root->log_ctxs'. Since btrfs_log_ctx is allocated
from stack memory, it'd get freed with a object alive on the
list. then a future list_add will throw the above warning.
This returns the correct error in the above case.
Jeff also reported this while testing against his fsync error
patch set[1].
[1]: https://www.spinics.net/lists/linux-btrfs/msg65308.html
"btrfs list corruption and soft lockups while testing writeback error handling"
Fixes: 8407f553268a4611f254 ("Btrfs: fix data corruption after fast fsync and writeback error")
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c37c28730bb031cc8a44a130c2555c0f3efbe2d0 ]
Reported by syzkaller:
*** Guest State ***
CR0: actual=0x0000000080010031, shadow=0x0000000060000010, gh_mask=fffffffffffffff7
CR4: actual=0x0000000000002061, shadow=0x0000000000000000, gh_mask=ffffffffffffe8f1
CR3 = 0x000000002081e000
RSP = 0x000000000000fffa RIP = 0x0000000000000000
RFLAGS=0x00023000 DR7 = 0x00000000000000
^^^^^^^^^^
------------[ cut here ]------------
WARNING: CPU: 6 PID: 24431 at /home/kernel/linux/arch/x86/kvm//x86.c:7302 kvm_arch_vcpu_ioctl_run+0x651/0x2ea0 [kvm]
CPU: 6 PID: 24431 Comm: reprotest Tainted: G W OE 4.14.0+ #26
RIP: 0010:kvm_arch_vcpu_ioctl_run+0x651/0x2ea0 [kvm]
RSP: 0018:ffff880291d179e0 EFLAGS: 00010202
Call Trace:
kvm_vcpu_ioctl+0x479/0x880 [kvm]
do_vfs_ioctl+0x142/0x9a0
SyS_ioctl+0x74/0x80
entry_SYSCALL_64_fastpath+0x23/0x9a
The failed vmentry is triggered by the following beautified testcase:
#include <unistd.h>
#include <sys/syscall.h>
#include <string.h>
#include <stdint.h>
#include <linux/kvm.h>
#include <fcntl.h>
#include <sys/ioctl.h>
long r[5];
int main()
{
struct kvm_debugregs dr = { 0 };
r[2] = open("/dev/kvm", O_RDONLY);
r[3] = ioctl(r[2], KVM_CREATE_VM, 0);
r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7);
struct kvm_guest_debug debug = {
.control = 0xf0403,
.arch = {
.debugreg[6] = 0x2,
.debugreg[7] = 0x2
}
};
ioctl(r[4], KVM_SET_GUEST_DEBUG, &debug);
ioctl(r[4], KVM_RUN, 0);
}
which testcase tries to setup the processor specific debug
registers and configure vCPU for handling guest debug events through
KVM_SET_GUEST_DEBUG. The KVM_SET_GUEST_DEBUG ioctl will get and set
rflags in order to set TF bit if single step is needed. All regs' caches
are reset to avail and GUEST_RFLAGS vmcs field is reset to 0x2 during vCPU
reset. However, the cache of rflags is not reset during vCPU reset. The
function vmx_get_rflags() returns an unreset rflags cache value since
the cache is marked avail, it is 0 after boot. Vmentry fails if the
rflags reserved bit 1 is 0.
This patch fixes it by resetting both the GUEST_RFLAGS vmcs field and
its cache to 0x2 during vCPU reset.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e70b57a6ce4e8b92a56a615ae79bdb2bd66035e7 ]
watchdog: BUG: soft lockup - CPU#6 stuck for 22s! [qemu-system-x86:10185]
CPU: 6 PID: 10185 Comm: qemu-system-x86 Tainted: G OE 4.14.0-rc4+ #4
RIP: 0010:kvm_get_time_scale+0x4e/0xa0 [kvm]
Call Trace:
get_time_ref_counter+0x5a/0x80 [kvm]
kvm_hv_process_stimers+0x120/0x5f0 [kvm]
kvm_arch_vcpu_ioctl_run+0x4b4/0x1690 [kvm]
kvm_vcpu_ioctl+0x33a/0x620 [kvm]
do_vfs_ioctl+0xa1/0x5d0
SyS_ioctl+0x79/0x90
entry_SYSCALL_64_fastpath+0x1e/0xa9
This can be reproduced when running kvm-unit-tests/hyperv_stimer.flat and
cpu-hotplug stress simultaneously. __this_cpu_read(cpu_tsc_khz) returns 0
(set in kvmclock_cpu_down_prep()) when the pCPU is unhotplug which results
in kvm_get_time_scale() gets into an infinite loop.
This patch fixes it by treating the unhotplug pCPU as not using master clock.
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9f97df50c52c2887432debb6238f4e43567386a5 ]
The i_version field in reiserfs is not initialized and is only ever
updated here. Nothing ever views it, so just remove it.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 52a395896a051a3d5c34fba67c324f69ec5e67c6 ]
When doing asoc reset, if the sender of the response has already sent some
chunk and increased asoc->next_tsn before the duplicate request comes, the
response will use the old result with an incorrect sender next_tsn.
Better than asoc->next_tsn, asoc->ctsn_ack_point can't be changed after
the sender of the response has performed the asoc reset and before the
peer has confirmed it, and it's value is still asoc->next_tsn original
value minus 1.
This patch sets sender next_tsn for the old result with ctsn_ack_point
plus 1 when processing the duplicate request, to make sure the sender
next_tsn value peer gets will be always right.
Fixes: 692787cef651 ("sctp: implement receiver-side procedures for the SSN/TSN Reset Request Parameter")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 159f2a7456c6ae95c1e1a58e8b8ec65ef12d51cf ]
Now when doing asoc reset, it cleans up sacked and abandoned queues
by calling sctp_outq_free where it also cleans up unsent, retransmit
and transmitted queues.
It's safe for the sender of response, as these 3 queues are empty at
that time. But when the receiver of response is doing the reset, the
users may already enqueue some chunks into unsent during the time
waiting the response, and these chunks should not be flushed.
To void the chunks in it would be removed, it moves the queue into a
temp list, then gets it back after sctp_outq_free is done.
The patch also fixes some incorrect comments in
sctp_process_strreset_tsnreq.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
