IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The I2S cores used in the H3 onwards support 32-bit sample rates.
Support these by adding a per-variant PCM format list.
Signed-off-by: John Watts <contact@jookia.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240403-sunxi_s32-v2-1-29ebf6ad590a@jookia.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Neither core nor the driver modifes 'struct regulator_ops', so it can be
const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240414164703.239851-1-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The ID table already has respective entry and MODULE_DEVICE_TABLE and
creates proper alias for platform driver. Having another MODULE_ALIAS
causes the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240414154839.126852-2-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The ID table already has respective entry and MODULE_DEVICE_TABLE and
creates proper alias for platform driver. Having another MODULE_ALIAS
causes the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240414154839.126852-1-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support microphone from Acer Aspire A315-24P and for some other similar devices with such vendor
Signed-off-by: "end.to.start" <end.to.start@mail.ru>
Link: https://lore.kernel.org/r/20240412075533.10214-1-end.to.start@mail.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
More cleanups from Brent, notably the removal of the redundant
cml_rt1011_rt5682 machine driver, fixes for SoundWire platforms and
changes to sof_rt5682 to allow for 96+ sampling rates.
For the rest of this kernel cycle, we are still working on SoundWire
updates for MeteorLake (usual missing ACPI signature required for
topology selection and jack detection information). We'll provide
those patches as soon as they are reviewed/validated.
There are two issues here:
1) The get_device() needs a matching put_device() on error paths.
2) The "if (!ret)" was supposed to be "if (ret)".
I re-arranged the code a bit to do the allocation before the
get_device().
Fixes: ef7784e41db7 ("ASoC: soc-card: Add KUnit test case for snd_soc_card_get_kcontrol")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/450dd21a-b24b-48ba-9aa4-c02e4617852f@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
Document fsl,imx25-pdk-sgtl5000 to fix the following dt-schema warning:
imx25-pdk.dtb: sound: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx25-pdk-sgtl5000', 'fsl,imx-audio-sgtl5000'] is too long
Fixes: 4189b54220e5 ("ASoC: dt-bindings: fsl-asoc-card: convert to YAML")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240412121410.2948048-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When 96KHz sample rate is used, and MCLK is 24.576MHz, we will need
pll_in = 24576000 and pll_out = 49152000 which is not supported by
RT5682S_PLL2. Use RT5682S_PLL1 in this case.
We don't test sample rate because RT5682S_PLL2 doesn't support 24.576MHz
input and in the MCLK = 24.576MHz, sample rate = 48KHz case, i.e.
pll_in == pll_out, PLL will not be used at all.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Delete this driver and use sof_rt5682 machine driver instead.
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For cml boards, ALC1011 speaker amplifier is supported by machine
driver cml_rt1011_rt5682. Use same driver name for backward
compatibility with existing devices on market.
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for boards with four ALC1011 amplifiers. Configuration is
copied from cml_rt1011_rt5682 machine driver for backward
compatibility with existing cml devices.
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the board config mtl_da7219_def to da7219 machine driver for all
mtl boards using default SSP port allocation (headphone codec on SSP2,
speaker amplifiers on SSP0, and BT offload on SSP1).
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a common entry in enumeration table for all da7219 boards
with/without speaker amplifier. All other rpl_da7219_def entries
become redundant so get removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a common entry in enumeration table for all da7219 boards
with/without speaker amplifier. All other adl_da7219_def entries
become redundant so get removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch removes a confusion between speakers and amplifiers.
The existing code keeps track of the number of amplifiers and reports
it in the 'cfg-amp' component string.
The number of speakers is defined with quirks, but those quirks are
not consistently added: in the MeteorLake case, none of the supported
platforms used such a quirk, and UCM does not use the values reported
anyways. The notion of 'FOUR_SPEAKERS' is also obsolete now with some
platforms having more than four speakers.
Let's just remove all this and only report the number of amplifiers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the imx-audio-spdif binding to YAML.
When testing dtbs_check, found below compatible strings
are not listed in document:
fsl,imx-sabreauto-spdif
fsl,imx6sx-sdb-spdif
So add them in yaml file to pass the test.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/1712830305-31350-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Variable ret is being assigned a value that is never read in a couple
of places. The variable is being re-assigned later on. The assignments
are redundant and can be removed.
Cleans up clang scan build warning:
sound/soc/codecs/tas2780.c:84:2: warning: Value stored to 'ret' is
never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://msgid.link/r/20240411083332.304887-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Bastien Curutchet <bastien.curutchet@bootlin.com>:
This series aims to add some features to McBSP driver.
Convert bindings from .txt to .yaml.
Add possibility to use an external clock as sample rate generator's
input.
Add handling of new formats (TDM, S24_LE, BP_FC).
Enable the detection of unexpected frame pulses.
Set the clock free-running mode according to SND_SOC_DAIFMT_[GATED/CONT]
configuration in DAI format.
Add ti,T1-framing[tx/rx] properties in DT. They allow to set the data
delay to two bit-clock periods.
This has been tested on a platform designed off of the DAVINCI/OMAP-L138
connected to 3 daisy-chained AD7767. An external clock drives the
sample rate generator through the CLKS pin.
The hardware I have only allowed me to test acquisition side of McBSP.
It is connected to a 6 channels TDM and acts as Bit clock provider and
Frame clock consumer.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The beginning of the first SRAM window contains various fw registers and
additional information which can be very beneficial to read to gather
information on the current states to debug issues.
When checking whether the power-down delay should be ignored for a specific
PCM runtime, there's no need to keep going through all DAI link components
after any of them is found to be configured to use the power-down delay.
While there, fix a small typo in one of the comment blocks.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://msgid.link/r/90ae761a5b99640ece48363a7099ac2cf402bd37.1712684592.git.dsimic@manjaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The SND_SOC_AMD_SOUNDWIRE Kconfig symbol has build dependency on
SOUNDWIRE_AMD. It gets it wrong for a configuration involving
SND_SOC_AMD_SOUNDWIRE_LINK_BASELINE=y,SND_SOC_AMD_PS=y and SOUNDWIRE_AMD=m,
which results in a link failure:
ld: vmlinux.o: in function `amd_sdw_probe':
>> sound/soc/amd/ps/pci-ps.c:271:(.text+0x1d51eff):
undefined reference to `sdw_amd_probe'
ld: vmlinux.o: in function `acp63_sdw_machine_select':
>> sound/soc/amd/ps/pci-ps.c:294:(.text+0x1d525d5):
undefined reference to `sdw_amd_get_slave_info'
ld: vmlinux.o: in function `amd_sdw_exit':
>> sound/soc/amd/ps/pci-ps.c:280:(.text+0x1d538ce):
undefined reference to `sdw_amd_exit'
Add a top level check config that forbids any of the AMD ACP drivers
with version >= 6.3 from being built-in with CONFIG_SOUNDWIRE_AMD=m.
Move SND_AMD_ACP_CONFIG common dependency config to
SND_SOC_AMD_ACP63_TOPLEVEL config.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404061257.khJml82D-lkp@intel.com/
Fixes: a806793f231e ("ASoC: amd: simplify soundwire dependencies for legacy stack")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240408180229.3287220-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
McBSP's data delay can be configured from 0 to 2 bit clock periods. 0 is
used for DSP_B format, 1 is used for DSP_A format, 2 is unused.
A data delay of 2 bit clock periods can be used to interface to
'T1 framing' devices where data stream is preceded by a 'framing bit'. On
transmission, McBSP inserts a blank period (high-impedance period)
before the first data bit to leave an opportunity for other devices to
set this 'framing bit'. On reception, McBSP discards the 'framing bit'
that precedes the data stream.
Add support for the 'framing bit' according to the
'ti,T1-framing-[tx/rx]' device-tree properties. If a flag is present,
the data delay is set to 2 bit clock periods regardless of the selected
DAI format.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-14-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
McBSP's data delay can be configured from 0 to 2 bit clock periods. 0 is
used for DSP_B format, 1 for DSP_A format. A data delay of 2 bit clock
periods can be used to interface to 'T1 framing' devices where data
stream is preceded by a 'framing bit'. This 2 bit clock data delay is
not described in the bindings.
Add two flags 'ti,T1-framing-[rx/tx]' to enable a data delay of 2
bit clock periods in reception or transmission.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-13-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
S24_LE is supported by McBSP but not by the driver.
Add S24_LE to driver's supported formats. Using it enables the sign
extension in DRR (Data Receive Register). The other formats are kept
with the zero extension in DRR.
Remove data_type table as it is no longer used.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-12-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
McBSP has free-running mode where serial clocks continue to run during
emulation halts. This mode is always enabled by the driver.
Set free-running mode when SND_SOC_DAIFMT_CONT is selected by DAI
format, unset it when SND_SOC_DAIFMT_GATED is selected.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-11-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
McBSP can generate a SYNCERR when unexpected frame pulses are
detected. The driver always disables this feature and ignore the
unexpected frame pulses.
Enable the generation of SYNCERR by the McBSP. Unexpected frame
pulses are not ignored anymore.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-10-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
McBSP is able to drive bit clock and consume frame clock but BP_FC
format is not handled by McBSP driver.
Add BP_FC format support.
When BP_FC is selected:
- CLKX and CLKR are configured as outputs
- The sample rate generator is configured to be able to provide bit
clock.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-9-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
TDM is not supported by the McBSP driver. The McBSP datasheet does not
name explicitly TDM as a supported format but it is possible to configure
the McBSP to do TDM if all slots are used by McBSP.
Add TDM support. It uses single-phase frame. Slot width is used to
compute the McBSP's word length.
Implement the set_tdm_slot() hook of snd_soc_dai_ops struct. It only
supports TDM if all slots are used by McBSP.
The snd_soc_dai_driver's channels_max is updated from 2 to 128.
This was tested with BP_FC format on a platform designed off of
DAVINCI/OMAP_L138. A check is done in davinci_i2s_set_dai_fmt() to
prevent TDM to be used with BC_FC and BC_FP formats.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-8-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In davinci_i2s_hw_params(), mcbsp_word_length is set twice to
asp_word_length[fmt].
Remove second unnecessary assignment.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-7-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
McBSP's internal sample rate generator can be programed to be driven by
its internal clock or by an external clock source located on CLKS pin.
The external clock source case is not handled by the driver.
Handle an optional clock related to this external clock source. If
present, the driver uses the clock located on CLKS pin as input for the
sample rate generator. Thus, the external clock rate is used to compute
divisors. If this optional clock is not present, the sample rate
generator is driven by the McBSP's functional clock.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-6-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In probe(), the dev_err() is used for every returned error.
Replace dev_err() with dev_err_probe() where -EPROBE_DEFER can be
returned.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-5-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The clk_input_pin attribute of davinci_mcbsp_dev struct is not set since
commit 257ade78b601 ("ASoC: davinci-i2s: Convert to use edma-pcm").
Remove the attribute.
Keep the behaviour of the MCBSP_CLKR case as MCBSP_CLKR == 0.
I can't test the BC_FP format so I added back the initial comment that
was removed by commit ec6375533748 ("ASoC: DaVinci: Added selection of
clk input pin for McBSP"). This was the last dependency to
linux/platform_data/davinci_asp.h so it is not included anymore.
Remove the enum mcbsp_clk_input_pin from davinci_asp.h as it is not used
anywhere else.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-4-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The McBSP uses an internal sample rate generator to provide bit clock
or frame clock. This sample rate generator can be programmed to be
driven by McBSP's internal clock source or by an external clock source
(located on CLKS pin). The external clock source is not described in
the bindings.
Add an optional clock item that allows to select an external clock as
sample rate generator's input.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-3-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the binding for McBSP controllers for TI SoCs from txt
to YAML schema.
Add properties 'clocks', 'clock-names', 'power-domains' and
'#sound-dai-cells' which were missing from the txt file.
Add '#sound-dai-cells' and 'clocks' in the example which were missing
from the txt file.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-2-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The various Rockchip embedded audio codecs are only present on Rockchip
SoCs. Hence add dependencies on ARCH_ROCKCHIP, to prevent asking the
user about these drivers when configuring a kernel without Rockchip SoC
support.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://msgid.link/r/6cdbaf4afcf4d2059b257f6cb3a8a61bf5e17688.1712676714.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Expose the firmware registers via debugfs. it can be of great help while
debugging complex issues.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240409113349.21623-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Expose the firmware registers via debugfs. it can be of great help while
debugging complex issues.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240409113349.21623-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Expose the firmware registers via debugfs. it can be of great help while
debugging complex issues.
The area is only available with IPC4.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240409113349.21623-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Initialize "is_legacy_cpu" to false to prevent an uninitialized variable
bug.
Fixes: 8efcd4864652 ("ASoC: Intel: sof_rt5682: use common module for sof_card_private initialization")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/6e16433f-1897-46a2-b3ee-e177e7d846b8@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Mohammad Rafi Shaik <quic_mohs@quicinc.com>:
This patchset adds support for sound card on Qualcomm QCM6490 IDP and
QCS6490 RB3Gen2 boards.
