IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
In iavf_down, we're skipping the scheduling of certain operations if
the driver is being removed. However, the IAVF_FLAG_AQ_DISABLE_QUEUES
request must not be skipped in this case, because iavf_close waits
for the transition to the __IAVF_DOWN state, which happens in
iavf_virtchnl_completion after the queues are released.
Without this fix, "rmmod iavf" takes half a second per interface that's
up and prints the "Device resources not yet released" warning.
Fixes: c8de44b577 ("iavf: do not process adminq tasks when __IAVF_IN_REMOVE_TASK is set")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Tested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231025183213.874283-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEN9lkrMBJgcdVAPub1V2XiooUIOQFAmU45rAACgkQ1V2XiooU
IORtEQ//U91FHPqc1KpJi5lAnXXAXaDji6RjZ080bwk4H3oXc2moc71SiGEgggGs
POZEnN0sNJXfUacdG23pQGLnrT1iQpG927mzV01W9HhyZEopO4g+mRt5ymt/qmvO
Q9MKWuNOlJCD5blPyKxU7VF3LsQynaPST1IbuPI1NVKiqNUpIpAWC1G+Ofpt67QY
Tq7KiJDX0yc+51OFT9Ahs3piSbzC5bl0yC4iynajPxziv+rUiJW5ym2GM24G2rNh
/SD4EeJkArdFa3I4Kf15Hnj9809qQP22PDhoQ2Hzzr7XbveArmPjaI0UQ39uV5Jr
1/lFP3iQMBsj04dI/xRLBHJHb2WZvlNa+btV/RHuaw1TEnYevdarMl3Lh0q7p5sT
3M4JBbk0+bq7ZXWmDBT48ZQs4S5UqMscunZXKg2k0fZPn/rSlASAZ3TAXZuF0avp
KLQGQsjeBX/zgmQqhq37/oD+YV13LCtEqC0xz4WgX9WpVvgyMR3LFcsHQcZBAVUN
PJenvgmpdo8sbhABOXsURJPVDo0JzS4xZhrPyIKaojTo33KfQ/1Z5Ef0EOkbs75+
6wMoUTdvcZK+Y5f6hvMQ/XOu7XNz0sVZlfBjAhFrVU/TsbprviQCN8QB1IQNHclm
5A93VnID0WPCSAmOmaIdMlcJka4wKv4irI+Iv8vNlQXqV7dXuzQ=
=r+0z
-----END PGP SIGNATURE-----
Merge tag 'nf-23-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
This patch contains two late Netfilter's flowtable fixes for net:
1) Flowtable GC pushes back packets to classic path in every GC run,
ie. every second. This is because NF_FLOW_HW_ESTABLISHED is only
used by sched/act_ct (never set) and IPS_SEEN_REPLY might be unset
by the time the flow is offloaded (this status bit is only reliable
in the sched/act_ct datapath).
2) sched/act_ct logic to push back packets to classic path to reevaluate
if UDP flow is unidirectional only applies if IPS_HW_OFFLOAD_BIT is
set on and no hardware offload request is pending to be handled.
From Vlad Buslov.
These two patches fixes two problems that were introduced in the
previous 6.5 development cycle.
* tag 'nf-23-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
net/sched: act_ct: additional checks for outdated flows
netfilter: flowtable: GC pushes back packets to classic path
====================
Link: https://lore.kernel.org/r/20231025100819.2664-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Once VQs are filled with empty buffers and we kick the host, it can send
connection requests. If the_virtio_vsock is not initialized before,
replies are silently dropped and do not reach the host.
virtio_transport_send_pkt() can queue packets once the_virtio_vsock is
set, but they won't be processed until vsock->tx_run is set to true. We
queue vsock->send_pkt_work when initialization finishes to send those
packets queued earlier.
Fixes: 0deab087b1 ("vsock/virtio: use RCU to avoid use-after-free on the_virtio_vsock")
Signed-off-by: Alexandru Matei <alexandru.matei@uipath.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20231024191742.14259-1-alexandru.matei@uipath.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The word "advertize" should be replaced by "advertise".
Signed-off-by: Deming Wang <wangdeming@inspur.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The word "advertize" should be replaced by "advertise".
Signed-off-by: Deming Wang <wangdeming@inspur.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current nf_flow_is_outdated() implementation considers any flow table flow
which state diverged from its underlying CT connection status for teardown
which can be problematic in the following cases:
- Flow has never been offloaded to hardware in the first place either
because flow table has hardware offload disabled (flag
NF_FLOWTABLE_HW_OFFLOAD is not set) or because it is still pending on 'add'
workqueue to be offloaded for the first time. The former is incorrect, the
later generates excessive deletions and additions of flows.
- Flow is already pending to be updated on the workqueue. Tearing down such
flows will also generate excessive removals from the flow table, especially
on highly loaded system where the latency to re-offload a flow via 'add'
workqueue can be quite high.
When considering a flow for teardown as outdated verify that it is both
offloaded to hardware and doesn't have any pending updates.
Fixes: 41f2c7c342 ("net/sched: act_ct: Fix promotion of offloaded unreplied tuple")
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Since 41f2c7c342 ("net/sched: act_ct: Fix promotion of offloaded
unreplied tuple"), flowtable GC pushes back flows with IPS_SEEN_REPLY
back to classic path in every run, ie. every second. This is because of
a new check for NF_FLOW_HW_ESTABLISHED which is specific of sched/act_ct.
In Netfilter's flowtable case, NF_FLOW_HW_ESTABLISHED never gets set on
and IPS_SEEN_REPLY is unreliable since users decide when to offload the
flow before, such bit might be set on at a later stage.
Fix it by adding a custom .gc handler that sched/act_ct can use to
deal with its NF_FLOW_HW_ESTABLISHED bit.
Fixes: 41f2c7c342 ("net/sched: act_ct: Fix promotion of offloaded unreplied tuple")
Reported-by: Vladimir Smelhaus <vl.sm@email.cz>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The I40E_TXR_FLAGS_WB_ON_ITR is i40e_ring flag and not i40e_pf one.
Fixes: 8e0764b4d6 ("i40e/i40evf: Add support for writeback on ITR feature for X722")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231023212714.178032-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- don't drop all unprotected public action frames since
some don't have a protected dual
- fix pointer confusion in scanning code
- fix warning in some connections with multiple links
-----BEGIN PGP SIGNATURE-----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=AvmQ
-----END PGP SIGNATURE-----
Merge tag 'wireless-2023-10-24' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Three more fixes:
- don't drop all unprotected public action frames since
some don't have a protected dual
- fix pointer confusion in scanning code
- fix warning in some connections with multiple links
* tag 'wireless-2023-10-24' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: don't drop all unprotected public action frames
wifi: cfg80211: fix assoc response warning on failed links
wifi: cfg80211: pass correct pointer to rdev_inform_bss()
====================
Link: https://lore.kernel.org/r/20231024103540.19198-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
GTP tunnel driver fixes
The following patchset contains two fixes for the GTP tunnel driver:
1) Incorrect GTPA_MAX definition in UAPI headers. This is updating an
existing UAPI definition but for a good reason, this is certainly
broken. Similar fixes for incorrect _MAX definition in netlink
headers were applied in the past too.
2) Fix GTP driver PMTU with GRO packets, add missing call to
skb_gso_validate_network_len() to handle GRO packets.
====================
Link: https://lore.kernel.org/r/20231022202519.659526-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Call skb_gso_validate_network_len() to check if packet is over PMTU.
Fixes: 459aa660eb ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Subtract one to __GTPA_MAX, otherwise GTPA_MAX is off by 2.
Fixes: 459aa660eb ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reduce the length of netlink error messages as they are likely to be
truncated anyway. Additionally, reword netlink error messages so they
are more consistent with previous messages.
Fixes: 9dbc8d2b9a ("sfc: add decrement ipv6 hop limit by offloading set hop limit actions")
Fixes: 3c9561c0a5 ("sfc: support TC decap rules matching on enc_ip_tos")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310202136.4u7bv0hp-lkp@intel.com/
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20231020140149.30490-1-pieter.jansen-van-vuuren@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If req->hr_proto->hp_accept() fail, we call fput() twice:
Once in the error path, but also a second time because sock->file
is at that point already associated with the file descriptor. Once
the task exits, as it would probably do after receiving an error
reading from netlink, the fd is closed, calling fput() a second time.
To fix, we move installing the file after the error path for the
hp_accept() call. In the case of errors we simply put the unused fd.
In case of success we can use fd_install() to link the sock->file
to the reserved fd.
Fixes: 7ea9c1ec66 ("net/handshake: Fix handshake_dup() ref counting")
Signed-off-by: Moritz Wanzenböck <moritz.wanzenboeck@linbit.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20231019125847.276443-1-moritz.wanzenboeck@linbit.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Not all public action frames have a protected variant. When MFP is
enabled drop only public action frames that have a dual protected
variant.
Fixes: 76a3059cf1 ("wifi: mac80211: drop some unprotected action frames")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231016145213.2973e3c8d3bb.I6198b8d3b04cf4a97b06660d346caec3032f232a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The warning here shouldn't be done before we even set the
bss field (or should've used the input data). Move the
assignment before the warning to fix it.
We noticed this now because of Wen's bugfix, where the bug
fixed there had previously hidden this other bug.
Fixes: 53ad07e982 ("wifi: cfg80211: support reporting failed links")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Confusing struct member names here resulted in passing
the wrong pointer, causing crashes. Pass the correct one.
Fixes: eb142608e2 ("wifi: cfg80211: use a struct for inform_single_bss data")
Signed-off-by: Ben Greear <greearb@candelatech.com>
Link: https://lore.kernel.org/r/20231021154827.1142734-1-greearb@candelatech.com
[rewrite commit message, add fixes]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This commit fix wrong RTO timeout when received SACK reneging.
When an ACK arrived pointing to a SACK reneging, tcp_check_sack_reneging()
will rearm the RTO timer for min(1/2*srtt, 10ms) into to the future.
But since the commit 62d9f1a694 ("tcp: fix TLP timer not set when
CA_STATE changes from DISORDER to OPEN") merged, the tcp_set_xmit_timer()
is moved after tcp_fastretrans_alert()(which do the SACK reneging check),
so the RTO timeout will be overwrited by tcp_set_xmit_timer() with
icsk_rto instead of 1/2*srtt.
Here is a packetdrill script to check this bug:
0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0
// simulate srtt to 100ms
+0 < S 0:0(0) win 32792 <mss 1000, sackOK,nop,nop,nop,wscale 7>
+0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7>
+.1 < . 1:1(0) ack 1 win 1024
+0 accept(3, ..., ...) = 4
+0 write(4, ..., 10000) = 10000
+0 > P. 1:10001(10000) ack 1
// inject sack
+.1 < . 1:1(0) ack 1 win 257 <sack 1001:10001,nop,nop>
+0 > . 1:1001(1000) ack 1
// inject sack reneging
+.1 < . 1:1(0) ack 1001 win 257 <sack 9001:10001,nop,nop>
// we expect rto fired in 1/2*srtt (50ms)
+.05 > . 1001:2001(1000) ack 1
This fix remove the FLAG_SET_XMIT_TIMER from ack_flag when
tcp_check_sack_reneging() set RTO timer with 1/2*srtt to avoid
being overwrited later.
Fixes: 62d9f1a694 ("tcp: fix TLP timer not set when CA_STATE changes from DISORDER to OPEN")
Signed-off-by: Fred Chen <fred.chenchen03@gmail.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Douglas Anderson says:
====================
r8152: Avoid writing garbage to the adapter's registers
This series is the result of a cooperative debug effort between
Realtek and the ChromeOS team. On ChromeOS, we've noticed that Realtek
Ethernet adapters can sometimes get so wedged that even a reboot of
the host can't get them to enumerate again, assuming that the adapter
was on a powered hub and din't lose power when the host rebooted. This
is sometimes seen in the ChromeOS automated testing lab. The only way
to recover adapters in this state is to manually power cycle them.
I managed to reproduce one instance of this wedging (unknown if this
is truly related to what the test lab sees) by doing this:
1. Start a flood ping from a host to the device.
2. Drop the device into kdb.
3. Wait 90 seconds.
4. Resume from kdb (the "g" command).
5. Wait another 45 seconds.
Upon analysis, Realtek realized this was happening:
1. The Linux driver was getting a "Tx timeout" after resuming from kdb
and then trying to reset itself.
2. As part of the reset, the Linux driver was attempting to do a
read-modify-write of the adapter's registers.
3. The read would fail (due to a timeout) and the driver pretended
that the register contained all 0xFFs. See commit f53a7ad189
("r8152: Set memory to all 0xFFs on failed reg reads")
4. The driver would take this value of all 0xFFs, modify it, and
attempt to write it back to the adapter.
5. By this time the USB channel seemed to recover and thus we'd
successfully write a value that was mostly 0xFFs to the adpater.
6. The adapter didn't like this and would wedge itself.
Another Engineer also managed to reproduce wedging of the Realtek
Ethernet adpater during a reboot test on an AMD Chromebook. In that
case he was sometimes seeing -EPIPE returned from the control
transfers.
This patch series fixes both issues.
Changes in v5:
- ("Run the unload routine if we have errors during probe") new for v5.
- ("Cancel hw_phy_work if we have an error in probe") new for v5.
- ("Release firmware if we have an error in probe") new for v5.
- Removed extra mutex_unlock() left over in v4.
- Fixed minor typos.
- Don't do queue an unbind/bind reset if probe fails; just retry probe.
Changes in v4:
- Took out some unnecessary locks/unlocks of the control mutex.
- Added comment about reading version causing probe fail if 3 fails.
- Added text to commit msg about the potential unbind/bind loop.
Changes in v3:
- Fixed v2 changelog ending up in the commit message.
- farmework -> framework in comments.
Changes in v2:
- ("Check for unplug in rtl_phy_patch_request()") new for v2.
- ("Check for unplug in r8153b_ups_en() / r8153c_ups_en()") new for v2.
- ("Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE") new for v2.
- Reset patch no longer based on retry patch, since that was dropped.
- Reset patch should be robust even if failures happen in probe.
- Switched booleans to bits in the "flags" variable.
- Check for -ENODEV instead of "udev->state == USB_STATE_NOTATTACHED"
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Even though the functions to read/write registers can fail, most of
the places in the r8152 driver that read/write register values don't
check error codes. The lack of error code checking is problematic in
at least two ways.
The first problem is that the r8152 driver often uses code patterns
similar to this:
x = read_register()
x = x | SOME_BIT;
write_register(x);
...with the above pattern, if the read_register() fails and returns
garbage then we'll end up trying to write modified garbage back to the
Realtek adapter. If the write_register() succeeds that's bad. Note
that as of commit f53a7ad189 ("r8152: Set memory to all 0xFFs on
failed reg reads") the "garbage" returned by read_register() will at
least be consistent garbage, but it is still garbage.
It turns out that this problem is very serious. Writing garbage to
some of the hardware registers on the Ethernet adapter can put the
adapter in such a bad state that it needs to be power cycled (fully
unplugged and plugged in again) before it can enumerate again.
The second problem is that the r8152 driver generally has functions
that are long sequences of register writes. Assuming everything will
be OK if a random register write fails in the middle isn't a great
assumption.
One might wonder if the above two problems are real. You could ask if
we would really have a successful write after a failed read. It turns
out that the answer appears to be "yes, this can happen". In fact,
we've seen at least two distinct failure modes where this happens.
On a sc7180-trogdor Chromebook if you drop into kdb for a while and
then resume, you can see:
1. We get a "Tx timeout"
2. The "Tx timeout" queues up a USB reset.
3. In rtl8152_pre_reset() we try to reinit the hardware.
4. The first several (2-9) register accesses fail with a timeout, then
things recover.
The above test case was actually fixed by the patch ("r8152: Increase
USB control msg timeout to 5000ms as per spec") but at least shows
that we really can see successful calls after failed ones.
On a different (AMD) based Chromebook with a particular adapter, we
found that during reboot tests we'd also sometimes get a transitory
failure. In this case we saw -EPIPE being returned sometimes. Retrying
worked, but retrying is not always safe for all register accesses
since reading/writing some registers might have side effects (like
registers that clear on read).
Let's fully lock out all register access if a register access fails.
When we do this, we'll try to queue up a USB reset and try to unlock
register access after the reset. This is slightly tricker than it
sounds since the r8152 driver has an optimized reset sequence that
only works reliably after probe happens. In order to handle this, we
avoid the optimized reset if probe didn't finish. Instead, we simply
retry the probe routine in this case.
When locking out access, we'll use the existing infrastructure that
the driver was using when it detected we were unplugged. This keeps us
from getting stuck in delay loops in some parts of the driver.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Whenever the RTL8152_UNPLUG is set that just tells the driver that all
accesses will fail and we should just immediately bail. A future patch
will use this same concept at a time when the driver hasn't actually
been unplugged but is about to be reset. Rename the flag in
preparation for the future patch.
This is a no-op change and just a search and replace.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the adapter is unplugged while we're looping in r8153b_ups_en() /
r8153c_ups_en() we could end up looping for 10 seconds (20 ms * 500
loops). Add code similar to what's done in other places in the driver
to check for unplug and bail.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the adapter is unplugged while we're looping in
rtl_phy_patch_request() we could end up looping for 10 seconds (2 ms *
5000 loops). Add code similar to what's done in other places in the
driver to check for unplug and bail.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The error handling in rtl8152_probe() is missing a call to release
firmware. Add it in to match what's in the cleanup code in
rtl8152_disconnect().
Fixes: 9370f2d05a ("r8152: support request_firmware for RTL8153")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The error handling in rtl8152_probe() is missing a call to cancel the
hw_phy_work. Add it in to match what's in the cleanup code in
rtl8152_disconnect().
Fixes: a028a9e003 ("r8152: move the settings of PHY to a work queue")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The rtl8152_probe() function lacks a call to the chip-specific
unload() routine when it sees an error in probe. Add it in to match
the cleanup code in rtl8152_disconnect().
Fixes: ac718b6930 ("net/usb: new driver for RTL8152")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to the comment next to USB_CTRL_GET_TIMEOUT and
USB_CTRL_SET_TIMEOUT, although sending/receiving control messages is
usually quite fast, the spec allows them to take up to 5 seconds.
Let's increase the timeout in the Realtek driver from 500ms to 5000ms
(using the #defines) to account for this.
This is not just a theoretical change. The need for the longer timeout
was seen in testing. Specifically, if you drop a sc7180-trogdor based
Chromebook into the kdb debugger and then "go" again after sitting in
the debugger for a while, the next USB control message takes a long
time. Out of ~40 tests the slowest USB control message was 4.5
seconds.
While dropping into kdb is not exactly an end-user scenario, the above
is similar to what could happen due to an temporary interrupt storm,
what could happen if there was a host controller (HW or SW) issue, or
what could happen if the Realtek device got into a confused state and
needed time to recover.
This change is fairly critical since the r8152 driver in Linux doesn't
expect register reads/writes (which are backed by USB control
messages) to fail.
Fixes: ac718b6930 ("net/usb: new driver for RTL8152")
Suggested-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
t4_set_params_timeout() can return -EINVAL if failed, add check
for this.
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
strncat() usage in adf7242_debugfs_init() is wrong.
The size given to strncat() is the maximum number of bytes that can be
written, excluding the trailing NULL.
Here, the size that is passed, DNAME_INLINE_LEN, does not take into account
the size of "adf7242-" that is already in the array.
In order to fix it, use snprintf() instead.
Fixes: 7302b9d901 ("ieee802154/adf7242: Driver for ADF7242 MAC IEEE802154")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
The spi_transfer struct has to have all it's fields initialized to 0 in
this case, since not all of them are set before starting the transfer.
Otherwise, spi_sync_transfer() will sometimes return an error.
Fixes: a526a3cc9c ("net: ethernet: adi: adin1110: Fix SPI transfers")
Signed-off-by: Dell Jin <dell.jin.code@outlook.com>
Signed-off-by: Ciprian Regus <ciprian.regus@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Upon boot up, the driver will configure the MAC capabilities based on
the maximum number of tx and rx queues. When the user changes the
tx queues to single queue, the MAC should be capable of supporting Half
Duplex, but the driver does not update the MAC capabilities when it is
configured so.
Using the stmmac_reinit_queues() to check the number of tx queues
and set the MAC capabilities accordingly.
Fixes: 0366f7e06a ("net: stmmac: add ethtool support for get/set channels")
Cc: <stable@vger.kernel.org> # 5.17+
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Signed-off-by: Gan, Yi Fang <yi.fang.gan@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit b0377116de ("net: ethernet: Use device_get_match_data()") dropped
the unconditional use of xgene_enet_of_match resulting in this warning:
drivers/net/ethernet/apm/xgene/xgene_enet_main.c:2004:34: warning: unused variable 'xgene_enet_of_match' [-Wunused-const-variable]
The fix is to drop of_match_ptr() which is not necessary because DT is
always used for this driver (well, it could in theory support ACPI only,
but CONFIG_OF is always enabled for arm64).
Fixes: b0377116de ("net: ethernet: Use device_get_match_data()")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310170627.2Kvf6ZHY-lkp@intel.com/
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a programming status desc is encountered on the rx_ring,
next_to_process is bumped along with cleaned_count but next_to_clean is
not. This causes I40E_DESC_UNUSED() macro to misbehave resulting in
overwriting whole ring with new buffers.
Update next_to_clean to point to next_to_process on seeing a programming
status desc if not in the middle of handling a multi-frag packet. Also,
bump cleaned_count only for such case as otherwise next_to_clean buffer
may be returned to hardware on reaching clean_threshold.
Fixes: e9031f2da1 ("i40e: introduce next_to_process to i40e_ring")
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reported-by: hq.dev+kernel@msdfc.xyz
Reported by: Solomon Peachy <pizza@shaftnet.org>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217678
Tested-by: hq.dev+kernel@msdfc.xyz
Tested by: Indrek Järve <incx@dustbite.net>
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20231019203852.3663665-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 'ethtool_convert_link_mode_to_legacy_u32' method does not allow us to
advertise 2500M speed support and TP (twisted pair) properly. Convert to
'ethtool_link_ksettings_test_link_mode' to advertise supported speed and
eliminate ambiguity.
Fixes: 8c5ad0dae9 ("igc: Add ethtool support")
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Suggested-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231019203641.3661960-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1) tbl->gc_thresh1, tbl->gc_thresh2, tbl->gc_thresh3 and tbl->gc_interval
can be written from sysfs.
2) tbl->last_flush is read locklessly from neigh_alloc()
3) tbl->proxy_queue.qlen is read locklessly from neightbl_fill_info()
4) neightbl_fill_info() reads cpu stats that can be changed concurrently.
Fixes: c7fb64db00 ("[NETLINK]: Neighbour table configuration and statistics via rtnetlink")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231019122104.1448310-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Under memory stress conditions, tcp_sendmsg_locked()
might call sk_stream_wait_memory(), thus releasing the socket lock.
If a fresh skb has been allocated prior to this,
we should not leave it in the write queue otherwise
tcp_write_xmit() could panic.
This apparently does not happen often, but a future change
in __sk_mem_raise_allocated() that Shakeel and others are
considering would increase chances of being hurt.
Under discussion is to remove this controversial part:
/* Fail only if socket is _under_ its sndbuf.
* In this case we cannot block, so that we have to fail.
*/
if (sk->sk_wmem_queued + size >= sk->sk_sndbuf) {
/* Force charge with __GFP_NOFAIL */
if (memcg_charge && !charged) {
mem_cgroup_charge_skmem(sk->sk_memcg, amt,
gfp_memcg_charge() | __GFP_NOFAIL);
}
return 1;
}
Fixes: fdfc5c8594 ("tcp: remove empty skb from write queue in error cases")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Link: https://lore.kernel.org/r/20231019112457.1190114-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add check for return of igb_update_ethtool_nfc_entry so that in case
of any potential errors the memory alocated for input will be freed.
Fixes: 0e71def252 ("igb: add support of RX network flow classification")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
reques -> request
Fixes: 09dde54c6a ("PS3: gelic: Add wireless support for PS3")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit c87c938f62 ("i40e: Add VF VLAN pruning") added new
PF flag I40E_FLAG_VF_VLAN_PRUNING but its value collides with
existing I40E_FLAG_TOTAL_PORT_SHUTDOWN_ENABLED flag.
Move the affected flag at the end of the flags and fix its value.
Reproducer:
[root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 link-down-on-close on
[root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 vf-vlan-pruning on
[root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 link-down-on-close off
[ 6323.142585] i40e 0000:02:00.0: Setting link-down-on-close not supported on this port (because total-port-shutdown is enabled)
netlink error: Operation not supported
[root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 vf-vlan-pruning off
[root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 link-down-on-close off
The link-down-on-close flag cannot be modified after setting vf-vlan-pruning
because vf-vlan-pruning shares the same bit with total-port-shutdown flag
that prevents any modification of link-down-on-close flag.
Fixes: c87c938f62 ("i40e: Add VF VLAN pruning")
Cc: Mateusz Palczewski <mateusz.palczewski@intel.com>
Cc: Simon Horman <horms@kernel.org>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: David S. Miller <davem@davemloft.net>
It is not safe to initialize the waitqueues after queueing the
watchdog_task. It will be using them.
The chance of this causing a real problem is very small, because
there will be some sleeping before any of the waitqueues get used.
I got a crash only after inserting an artificial sleep in iavf_probe.
Queue the watchdog_task as the last step in iavf_probe. Add a comment to
prevent repeating the mistake.
Fixes: fe2647ab0c ("i40evf: prevent VF close returning before state transitions to DOWN")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
KCSAN reported the following data-race bug:
==================================================================
BUG: KCSAN: data-race in rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4430 drivers/net/ethernet/realtek/r8169_main.c:4583) r8169
race at unknown origin, with read to 0xffff888117e43510 of 4 bytes by interrupt on cpu 21:
rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4430 drivers/net/ethernet/realtek/r8169_main.c:4583) r8169
__napi_poll (net/core/dev.c:6527)
net_rx_action (net/core/dev.c:6596 net/core/dev.c:6727)
__do_softirq (kernel/softirq.c:553)
__irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632)
irq_exit_rcu (kernel/softirq.c:647)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1074 (discriminator 14))
asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:645)
cpuidle_enter_state (drivers/cpuidle/cpuidle.c:291)
cpuidle_enter (drivers/cpuidle/cpuidle.c:390)
call_cpuidle (kernel/sched/idle.c:135)
do_idle (kernel/sched/idle.c:219 kernel/sched/idle.c:282)
cpu_startup_entry (kernel/sched/idle.c:378 (discriminator 1))
start_secondary (arch/x86/kernel/smpboot.c:210 arch/x86/kernel/smpboot.c:294)
secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:433)
value changed: 0x80003fff -> 0x3402805f
Reported by Kernel Concurrency Sanitizer on:
CPU: 21 PID: 0 Comm: swapper/21 Tainted: G L 6.6.0-rc2-kcsan-00143-gb5cbe7c00aa0 #41
Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023
==================================================================
drivers/net/ethernet/realtek/r8169_main.c:
==========================================
4429
→ 4430 status = le32_to_cpu(desc->opts1);
4431 if (status & DescOwn)
4432 break;
4433
4434 /* This barrier is needed to keep us from reading
4435 * any other fields out of the Rx descriptor until
4436 * we know the status of DescOwn
4437 */
4438 dma_rmb();
4439
4440 if (unlikely(status & RxRES)) {
4441 if (net_ratelimit())
4442 netdev_warn(dev, "Rx ERROR. status = %08x\n",
Marco Elver explained that dma_rmb() doesn't prevent the compiler to tear up the access to
desc->opts1 which can be written to concurrently. READ_ONCE() should prevent that from
happening:
4429
→ 4430 status = le32_to_cpu(READ_ONCE(desc->opts1));
4431 if (status & DescOwn)
4432 break;
4433
As the consequence of this fix, this KCSAN warning was eliminated.
Fixes: 6202806e7c ("r8169: drop member opts1_mask from struct rtl8169_private")
Suggested-by: Marco Elver <elver@google.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: nic_swsd@realtek.com
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/lkml/dc7fc8fa-4ea4-e9a9-30a6-7c83e6b53188@alu.unizg.hr/
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
KCSAN reported the following data-race:
==================================================================
BUG: KCSAN: data-race in rtl8169_poll [r8169] / rtl8169_start_xmit [r8169]
write (marked) to 0xffff888102474b74 of 4 bytes by task 5358 on cpu 29:
rtl8169_start_xmit (drivers/net/ethernet/realtek/r8169_main.c:4254) r8169
dev_hard_start_xmit (./include/linux/netdevice.h:4889 ./include/linux/netdevice.h:4903 net/core/dev.c:3544 net/core/dev.c:3560)
sch_direct_xmit (net/sched/sch_generic.c:342)
__dev_queue_xmit (net/core/dev.c:3817 net/core/dev.c:4306)
ip_finish_output2 (./include/linux/netdevice.h:3082 ./include/net/neighbour.h:526 ./include/net/neighbour.h:540 net/ipv4/ip_output.c:233)
__ip_finish_output (net/ipv4/ip_output.c:311 net/ipv4/ip_output.c:293)
ip_finish_output (net/ipv4/ip_output.c:328)
ip_output (net/ipv4/ip_output.c:435)
ip_send_skb (./include/net/dst.h:458 net/ipv4/ip_output.c:127 net/ipv4/ip_output.c:1486)
udp_send_skb (net/ipv4/udp.c:963)
udp_sendmsg (net/ipv4/udp.c:1246)
inet_sendmsg (net/ipv4/af_inet.c:840 (discriminator 4))
sock_sendmsg (net/socket.c:730 net/socket.c:753)
__sys_sendto (net/socket.c:2177)
__x64_sys_sendto (net/socket.c:2185)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
read to 0xffff888102474b74 of 4 bytes by interrupt on cpu 21:
rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4397 drivers/net/ethernet/realtek/r8169_main.c:4581) r8169
__napi_poll (net/core/dev.c:6527)
net_rx_action (net/core/dev.c:6596 net/core/dev.c:6727)
__do_softirq (kernel/softirq.c:553)
__irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632)
irq_exit_rcu (kernel/softirq.c:647)
common_interrupt (arch/x86/kernel/irq.c:247 (discriminator 14))
asm_common_interrupt (./arch/x86/include/asm/idtentry.h:636)
cpuidle_enter_state (drivers/cpuidle/cpuidle.c:291)
cpuidle_enter (drivers/cpuidle/cpuidle.c:390)
call_cpuidle (kernel/sched/idle.c:135)
do_idle (kernel/sched/idle.c:219 kernel/sched/idle.c:282)
cpu_startup_entry (kernel/sched/idle.c:378 (discriminator 1))
start_secondary (arch/x86/kernel/smpboot.c:210 arch/x86/kernel/smpboot.c:294)
secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:433)
value changed: 0x002f4815 -> 0x002f4816
Reported by Kernel Concurrency Sanitizer on:
CPU: 21 PID: 0 Comm: swapper/21 Tainted: G L 6.6.0-rc2-kcsan-00143-gb5cbe7c00aa0 #41
Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023
==================================================================
The write side of drivers/net/ethernet/realtek/r8169_main.c is:
==================
4251 /* rtl_tx needs to see descriptor changes before updated tp->cur_tx */
4252 smp_wmb();
4253
→ 4254 WRITE_ONCE(tp->cur_tx, tp->cur_tx + frags + 1);
4255
4256 stop_queue = !netif_subqueue_maybe_stop(dev, 0, rtl_tx_slots_avail(tp),
4257 R8169_TX_STOP_THRS,
4258 R8169_TX_START_THRS);
The read side is the function rtl_tx():
4355 static void rtl_tx(struct net_device *dev, struct rtl8169_private *tp,
4356 int budget)
4357 {
4358 unsigned int dirty_tx, bytes_compl = 0, pkts_compl = 0;
4359 struct sk_buff *skb;
4360
4361 dirty_tx = tp->dirty_tx;
4362
4363 while (READ_ONCE(tp->cur_tx) != dirty_tx) {
4364 unsigned int entry = dirty_tx % NUM_TX_DESC;
4365 u32 status;
4366
4367 status = le32_to_cpu(tp->TxDescArray[entry].opts1);
4368 if (status & DescOwn)
4369 break;
4370
4371 skb = tp->tx_skb[entry].skb;
4372 rtl8169_unmap_tx_skb(tp, entry);
4373
4374 if (skb) {
4375 pkts_compl++;
4376 bytes_compl += skb->len;
4377 napi_consume_skb(skb, budget);
4378 }
4379 dirty_tx++;
4380 }
4381
4382 if (tp->dirty_tx != dirty_tx) {
4383 dev_sw_netstats_tx_add(dev, pkts_compl, bytes_compl);
4384 WRITE_ONCE(tp->dirty_tx, dirty_tx);
4385
4386 netif_subqueue_completed_wake(dev, 0, pkts_compl, bytes_compl,
4387 rtl_tx_slots_avail(tp),
4388 R8169_TX_START_THRS);
4389 /*
4390 * 8168 hack: TxPoll requests are lost when the Tx packets are
4391 * too close. Let's kick an extra TxPoll request when a burst
4392 * of start_xmit activity is detected (if it is not detected,
4393 * it is slow enough). -- FR
4394 * If skb is NULL then we come here again once a tx irq is
4395 * triggered after the last fragment is marked transmitted.
4396 */
→ 4397 if (tp->cur_tx != dirty_tx && skb)
4398 rtl8169_doorbell(tp);
4399 }
4400 }
Obviously from the code, an earlier detected data-race for tp->cur_tx was fixed in the
line 4363:
4363 while (READ_ONCE(tp->cur_tx) != dirty_tx) {
but the same solution is required for protecting the other access to tp->cur_tx:
→ 4397 if (READ_ONCE(tp->cur_tx) != dirty_tx && skb)
4398 rtl8169_doorbell(tp);
The write in the line 4254 is protected with WRITE_ONCE(), but the read in the line 4397
might have suffered read tearing under some compiler optimisations.
The fix eliminated the KCSAN data-race report for this bug.
It is yet to be evaluated what happens if tp->cur_tx changes between the test in line 4363
and line 4397. This test should certainly not be cached by the compiler in some register
for such a long time, while asynchronous writes to tp->cur_tx might have occurred in line
4254 in the meantime.
Fixes: 94d8a98e62 ("r8169: reduce number of workaround doorbell rings")
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: nic_swsd@realtek.com
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Marco Elver <elver@google.com>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/lkml/dc7fc8fa-4ea4-e9a9-30a6-7c83e6b53188@alu.unizg.hr/
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Feels like an up-tick in regression fixes, mostly for older releases.
The hfsc fix, tcp_disconnect() and Intel WWAN fixes stand out as fairly
clear-cut user reported regressions. The mlx5 DMA bug was causing strife
for 390x folks. The fixes themselves are not particularly scary, tho.
No open investigations / outstanding reports at the time of writing.
Current release - regressions:
- eth: mlx5: perform DMA operations in the right locations,
make devices usable on s390x, again
- sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner curve,
previous fix of rejecting invalid config broke some scripts
- rfkill: reduce data->mtx scope in rfkill_fop_open, avoid deadlock
- revert "ethtool: Fix mod state of verbose no_mask bitset",
needs more work
Current release - new code bugs:
- tcp: fix listen() warning with v4-mapped-v6 address
Previous releases - regressions:
- tcp: allow tcp_disconnect() again when threads are waiting,
it was denied to plug a constant source of bugs but turns out
.NET depends on it
- eth: mlx5: fix double-free if buffer refill fails under OOM
- revert "net: wwan: iosm: enable runtime pm support for 7560",
it's causing regressions and the WWAN team at Intel disappeared
- tcp: tsq: relax tcp_small_queue_check() when rtx queue contains
a single skb, fix single-stream perf regression on some devices
Previous releases - always broken:
- Bluetooth:
- fix issues in legacy BR/EDR PIN code pairing
- correctly bounds check and pad HCI_MON_NEW_INDEX name
- netfilter:
- more fixes / follow ups for the large "commit protocol" rework,
which went in as a fix to 6.5
- fix null-derefs on netlink attrs which user may not pass in
- tcp: fix excessive TLP and RACK timeouts from HZ rounding
(bless Debian for keeping HZ=250 alive)
- net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation, prevent
letting frankenstein UDP super-frames from getting into the stack
- net: fix interface altnames when ifc moves to a new namespace
- eth: qed: fix the size of the RX buffers
- mptcp: avoid sending RST when closing the initial subflow
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=z1F6
-----END PGP SIGNATURE-----
Merge tag 'net-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, netfilter, WiFi.
Feels like an up-tick in regression fixes, mostly for older releases.
The hfsc fix, tcp_disconnect() and Intel WWAN fixes stand out as
fairly clear-cut user reported regressions. The mlx5 DMA bug was
causing strife for 390x folks. The fixes themselves are not
particularly scary, tho. No open investigations / outstanding reports
at the time of writing.
Current release - regressions:
- eth: mlx5: perform DMA operations in the right locations, make
devices usable on s390x, again
- sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner
curve, previous fix of rejecting invalid config broke some scripts
- rfkill: reduce data->mtx scope in rfkill_fop_open, avoid deadlock
- revert "ethtool: Fix mod state of verbose no_mask bitset", needs
more work
Current release - new code bugs:
- tcp: fix listen() warning with v4-mapped-v6 address
Previous releases - regressions:
- tcp: allow tcp_disconnect() again when threads are waiting, it was
denied to plug a constant source of bugs but turns out .NET depends
on it
- eth: mlx5: fix double-free if buffer refill fails under OOM
- revert "net: wwan: iosm: enable runtime pm support for 7560", it's
causing regressions and the WWAN team at Intel disappeared
- tcp: tsq: relax tcp_small_queue_check() when rtx queue contains a
single skb, fix single-stream perf regression on some devices
Previous releases - always broken:
- Bluetooth:
- fix issues in legacy BR/EDR PIN code pairing
- correctly bounds check and pad HCI_MON_NEW_INDEX name
- netfilter:
- more fixes / follow ups for the large "commit protocol" rework,
which went in as a fix to 6.5
- fix null-derefs on netlink attrs which user may not pass in
- tcp: fix excessive TLP and RACK timeouts from HZ rounding (bless
Debian for keeping HZ=250 alive)
- net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation, prevent
letting frankenstein UDP super-frames from getting into the stack
- net: fix interface altnames when ifc moves to a new namespace
- eth: qed: fix the size of the RX buffers
- mptcp: avoid sending RST when closing the initial subflow"
* tag 'net-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits)
Revert "ethtool: Fix mod state of verbose no_mask bitset"
selftests: mptcp: join: no RST when rm subflow/addr
mptcp: avoid sending RST when closing the initial subflow
mptcp: more conservative check for zero probes
tcp: check mptcp-level constraints for backlog coalescing
selftests: mptcp: join: correctly check for no RST
net: ti: icssg-prueth: Fix r30 CMDs bitmasks
selftests: net: add very basic test for netdev names and namespaces
net: move altnames together with the netdevice
net: avoid UAF on deleted altname
net: check for altname conflicts when changing netdev's netns
net: fix ifname in netlink ntf during netns move
net: ethernet: ti: Fix mixed module-builtin object
net: phy: bcm7xxx: Add missing 16nm EPHY statistics
ipv4: fib: annotate races around nh->nh_saddr_genid and nh->nh_saddr
tcp_bpf: properly release resources on error paths
net/sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner curve
net: mdio-mux: fix C45 access returning -EIO after API change
tcp: tsq: relax tcp_small_queue_check() when rtx queue contains a single skb
octeon_ep: update BQL sent bytes before ringing doorbell
...
-----BEGIN PGP SIGNATURE-----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=RreE
-----END PGP SIGNATURE-----
Merge tag 'loongarch-fixes-6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai ChenL
"Fix 4-level pagetable building, disable WUC for pgprot_writecombine()
like ioremap_wc(), use correct annotation for exception handlers, and
a trivial cleanup"
* tag 'loongarch-fixes-6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Disable WUC for pgprot_writecombine() like ioremap_wc()
LoongArch: Replace kmap_atomic() with kmap_local_page() in copy_user_highpage()
LoongArch: Export symbol invalid_pud_table for modules building
LoongArch: Use SYM_CODE_* to annotate exception handlers
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmUxOtMACgkQu+CwddJF
iJqwmgf/UYBHiwWoGXOuLCDBvm2Z4GwQyGH347IVooDpY28/NoWqeGeYbllvqj9k
2EhP5zWLT945nt4L2Si98hn0ikqZ4DyljrHv/zpQShqKII7Ddh3o3j5r60Cbhyql
9HAhei2I2lhiVLQBuQ2MQxFYeXW38s1XRL9/OY6nph8tYC2GvafVei3a0YHiT5J3
CwkWQs+TV8R5RSFVE52htPV2PWx2+ZI5apyEeu9yuXZr22RuRsAgZM27QjakNrGI
bFdShWQwnWSf/MmtuEtqXwBw4dpvLyG9gqVaeMZUydrW7OotR9kLvnL2yhoMvNb6
7bq+cJniwLj31uYRHgIALzzaVjA88Q==
=hkq/
-----END PGP SIGNATURE-----
Merge tag 'slab-fixes-for-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
- stable fix to prevent kernel warnings with KASAN_HW_TAGS on arm64
due to improperly resolved kmalloc alignment restrictions (Catalin
Marinas)
* tag 'slab-fixes-for-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm: slab: Do not create kmalloc caches smaller than arch_slab_minalign()
