IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Since the LED modes mapping is no longer hardcoded inside the leds-ns2
driver, then it must be provided through the modes-map property in the
ns2-leds nodes.
Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Three architectures already define these, and we'll need them genericly
soon.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Provide a software-based implementation of the priviledged no access
support found in ARMv8.1.
Userspace pages are mapped using a different domain number from the
kernel and IO mappings. If we switch the user domain to "no access"
when we enter the kernel, we can prevent the kernel from touching
userspace.
However, the kernel needs to be able to access userspace via the
various user accessor functions. With the wrapping in the previous
patch, we can temporarily enable access when the kernel needs user
access, and re-disable it afterwards.
This allows us to trap non-intended accesses to userspace, eg, caused
by an inadvertent dereference of the LIST_POISON* values, which, with
appropriate user mappings setup, can be made to succeed. This in turn
can allow use-after-free bugs to be further exploited than would
otherwise be possible.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Provide hooks into the kernel entry and exit paths to permit control
of userspace visibility to the kernel. The intended use is:
- on entry to kernel from user, uaccess_disable will be called to
disable userspace visibility
- on exit from kernel to user, uaccess_enable will be called to
enable userspace visibility
- on entry from a kernel exception, uaccess_save_and_disable will be
called to save the current userspace visibility setting, and disable
access
- on exit from a kernel exception, uaccess_restore will be called to
restore the userspace visibility as it was before the exception
occurred.
These hooks allows us to keep userspace visibility disabled for the
vast majority of the kernel, except for localised regions where we
want to explicitly access userspace.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The following structure is just asking for trouble:
#ifdef CONFIG_symbol
.macro foo
...
.endm
.macro bar
...
.endm
.macro baz
...
.endm
#else
.macro foo
...
.endm
.macro bar
...
.endm
#ifdef CONFIG_symbol2
.macro baz
...
.endm
#else
.macro baz
...
.endm
#endif
#endif
such as one defintion being updated, but the other definitions miss out.
Where the contents of a macro needs to be conditional, the hint is in
the first clause of this very sentence. "contents" "conditional". Not
multiple separate definitions, especially not when much of the macro
is the same between different configs.
This patch fixes this bad style, which had caused the Thumb2 code to
miss-out on the uaccess updates.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This contains the DFLL driver needed to implement CPU frequency scaling
on Tegra.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=QWKO
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.3-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-next
clk: tegra: Changes for v4.3-rc1
This contains the DFLL driver needed to implement CPU frequency scaling
on Tegra.
The only caller of cpu_die() on ARM is arch_cpu_idle_dead(), so
let's simplify the code by renaming cpu_die() to
arch_cpu_idle_dead(). While were here, drop the __ref annotation
because __cpuinit is gone nowadays.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
on veyron boards.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJV3Bg7AAoJEPOmecmc0R2BJ5kH/ReLNj9v5iCw1inJpBMuB2rk
R1wECYOWSP3rDcORDZjjBChnYt02ft/3CnUstqE5vDJo1bNo/c9PvU5BPUGoXdOv
Zx6ZXY5Q8nqGL0I39iP3gkboRzODeO+IpHzWlyLtnDIFRSzB8DBcHxm2wDvTPmqI
qz4N+ObioycXqlOeimwE0o30qZeNTX/dIZ/pLlDojN2y0Kw71vnJPpgAcK6N+xEi
w8VEMUW9oe0w31lDUfXJIL5ArjeCeOjoHjfGEwclsaOp0ic+OTVUmNOpo6MZ0Oni
khuU/xvaWepE34+cvMA0BTzjY/t8L8dHhsw/ivEwrhRe+Uv8F/hgkVine/iS+/U=
=AOly
-----END PGP SIGNATURE-----
Merge tag 'v4.3-rockchip32-dts3' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
Fixes for non-standard and inverted regulator-suspend-properties
on veyron boards.
* tag 'v4.3-rockchip32-dts3' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: correct regulator power states for suspend
ARM: dts: rockchip: correct regulator PM properties
Signed-off-by: Olof Johansson <olof@lixom.net>
Provide uaccess_save_and_enable() and uaccess_restore() to permit
control of userspace visibility to the kernel, and hook these into
the appropriate places in the kernel where we need to access
userspace.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Improve the do_ldrd_abort macro code - firstly, it inefficiently checks
for the LDRD encoding by doing a multi-stage test of various bits. This
can be simplified by generating a mask, bitmasking the instruction and
then comparing the result.
Secondly, we want to be able to test the result rather than branching
to do_DataAbort, so remove the branch at the end and rename the macro
to 'teq_ldrd' to reflect it's new usage. teq_ldrd macro returns 'eq'
if the instruction was a LDRD.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The audit code looks like it's been written to cope with being called
with IRQs enabled. However, it's unclear whether IRQs should be
enabled or disabled when calling the syscall tracing infrastructure.
Right now, sometimes we call this with IRQs enabled, and other times
with IRQs disabled. Opt for IRQs being enabled for consistency.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Make the "fast" syscall return path fast again. The addition of IRQ
tracing and context tracking has made this path grossly inefficient.
We can do much better if these options are enabled if we save the
syscall return code on the stack - we then don't need to save a bunch
of registers around every single callout to C code.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
There's no need for this macro, it can use a default for the
condition argument.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The user assembly for byte and word accesses was virtually identical.
Rather than duplicating this, use a macro instead.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The base addresses for the Ux500 PRCC controllers are hardcoded,
let's move them to the clock node in the device tree and delete
the constants.
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
We're removing struct clk from the clk provider API, so switch to
clk_get_rate() and clk_hw_get_rate() here appropriately.
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
PTR_ERR should access the value just tested by IS_ERR.
The semantic patch that makes this change is available
in scripts/coccinelle/tests/odd_ptr_err.cocci.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJV2pUkAAoJEHm+PkMAQRiGCIoH/Rb29ZjdCoZJp9OtnjAG+qRc
bG3YuomIdib86x7xHRKKaLWBa7din7IYjuwT/X4S4duO5a1R5Lp1sRG3IlGfhT0W
nBNbjFl4q4bOyiTPtTRTYyh4g5UQv4IuyCnCmZyCTJyVi/O6HVM9TWKUzm68P2dJ
30LwLUcQJ+mHueGJwFBAXe2BaojEpvYCdSX6tvbrQ/8X3FrVExZXuJl4uMYNFYNK
ZwG/v5t7tYOiAe76JGbrEuVFPZWLPEW7amHOWR0T4Ye4nWTlBgx7fENiNRlfgcvI
CM16l/xkyrZQ3Q5jZy1qYDfdHYF++dyEDysX4w1ae/X0aaLZn7l+u5VQD6WpkQQ=
=IF6I
-----END PGP SIGNATURE-----
Merge tag 'v4.2-rc8' into drm-next
Linux 4.2-rc8
Backmerge required for Intel so they can fix their -next tree up properly.
Pull ARM fixes from Russell King:
"Another couple of small ARM fixes.
A patch from Masahiro Yamada who noticed that "make -jN all zImage"
would end up generating bad images where N > 1, and a patch from
Nicolas to fix the Marvell CPU user access optimisation code when page
faults are disabled"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: 8418/1: add boot image dependencies to not generate invalid images
ARM: 8414/1: __copy_to_user_memcpy: fix mmap semaphore usage
Highlights for KVM PPC this time around:
- Book3S: A few bug fixes
- Book3S: Allow micro-threading on POWER8
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=t+9t
-----END PGP SIGNATURE-----
Merge tag 'signed-kvm-ppc-next' of git://github.com/agraf/linux-2.6 into kvm-queue
Patch queue for ppc - 2015-08-22
Highlights for KVM PPC this time around:
- Book3S: A few bug fixes
- Book3S: Allow micro-threading on POWER8
Enables CPU frequency scaling on Jetson TK1 and enables the GK20A GPU on
Venice2 and Jetson TK1. This also enables support for the PMU hardware
found on Tegra124, which among other things, can be used for performance
measurements.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=tdwi
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.3-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
ARM: tegra: Devicetree changes for v4.3-rc1
Enables CPU frequency scaling on Jetson TK1 and enables the GK20A GPU on
Venice2 and Jetson TK1. This also enables support for the PMU hardware
found on Tegra124, which among other things, can be used for performance
measurements.
* tag 'tegra-for-4.3-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Add gpio-ranges property
ARM: tegra: Fix AHB base address on Tegra20, Tegra30 and Tegra114
ARM: tegra: Add Tegra124 PMU support
ARM: tegra: jetson-tk1: Add GK20A GPU DT node
ARM: tegra: venice2: Add GK20A GPU DT node
ARM: tegra: Add IOMMU node to GK20A
ARM: tegra: Add CPU regulator to the Jetson TK1 device tree
ARM: tegra: Add entries for cpufreq on Tegra124
ARM: tegra: Enable the DFLL on the Jetson TK1
ARM: tegra: Add the DFLL to Tegra124 device tree
pinctrl: tegra: Only set the gpio range if needed
clk: tegra: Add the DFLL as a possible parent of the cclk_g clock
clk: tegra: Save/restore CCLKG_BURST_POLICY on suspend
clk: tegra: Add Tegra124 DFLL clocksource platform driver
clk: tegra: Add DFLL DVCO reset control for Tegra124
clk: tegra: Introduce ability for SoC-specific reset control callbacks
clk: tegra: Add functions for parsing CVB tables
clk: tegra: Add closed loop support for the DFLL
clk: tegra: Add library for the DFLL clock source (open-loop mode)
clk: tegra: Add binding for the Tegra124 DFLL clocksource
Signed-off-by: Olof Johansson <olof@lixom.net>
Specify how the GPIOs map to the pins in Tegra SoCs, so the dependency is
explicit.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Current base address is wrong by 0x04 bytes for AHB bus device as shown
in dmesg:
tegra-ahb 6000c004.ahb: incorrect AHB base address in DT data - enabling workaround
To correct old DTBs, commit ce7a10b0ff3d ("ARM: 8334/1: amba: tegra-ahb:
detect and correct bogus base address") checks for the low bit of the
base address and removes theses 0x04 bytes at runtime.
This patch fixes the original DTS, so upstream version doesn't need the
workaround of the base address.
As both addresses are valid, this patch doesn't break compatibility.
Tested on tegra20-paz00 (aka ac100).
Signed-off-by: Nicolas Chauvet <kwizart@gmail.com>
Reviewed-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This patch modifies the device tree for Tegra124 based devices to enable
the Cortex A15 PMU. The interrupt numbers are taken from NVIDIA Tegra K1
TRM (DP-06905-001_v03p). This patch was tested on a Jetson TK1.
Signed-off-by: Kyle Huey <khuey@kylehuey.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the device-tree node for the GK20A GPU and leave it disabled.
It is the responsibility of the bootloader to enable it if the
VPR registers have been programmed such that the GPU can operate.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the device-tree node for the GK20A GPU and leave it disabled.
It is the responsibility of the bootloader to enable it if the
VPR registers have been programmed such that the GPU can operate.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Nouveau can make use of the IOMMU to make physical appear linear in the
GPU address space.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Specify the CPU voltage regulator for the cpufreq driver.
Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra124 cpufreq driver relies on certain clocks being present
in the /cpus/cpu@0 node.
Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the board-specific properties of the DFLL for the Jetson TK1 board.
On this board, the DFLL will take control of the sd0 regulator on the
on-board AS3722 PMIC.
Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi>
Acked-by: Michael Turquette <mturquette@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The DFLL clocksource is a separate IP block from the usual
clock-and-reset controller, so it gets its own device tree node.
Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi>
Acked-by: Michael Turquette <mturquette@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
We should call phy_register_fixup_for_uid() only when CONFIG_PHYLIB
is built-in, otherwise we get the following link error when building
allmodconfig:
arch/arm/mach-imx/built-in.o: In function `imx6ul_init_machine':
:(.init.text+0xa714): undefined reference to `phy_register_fixup_for_uid'
This is the same approach done in mach-imx6q.c and mach-imx6sx.c.
Reported-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Since v3.18, attempts to deliver IRQ0 are rejected, breaking orion5x.
Fix this by increasing all interrupts by one, as did 5d6bed2a9c8b for
dove. Also, force MULTI_IRQ_HANDLER for all orion platforms (including
dove) as the specific handler is needed to shift back IRQ numbers by
one.
[gregory.clement@free-electrons.com]: moved the select
MULTI_IRQ_HANDLER from PLAT_ORION_LEGACY to ARCH_ORION5X as it broke
the build for dove.
Fixes: a71b092a9c68 ("ARM: Convert handle_IRQ to use __handle_domain_irq")
Signed-off-by: Benjamin Cama <benoar@dolka.fr>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: <stable@vger.kernel.org>
Tested-by: Detlef Vollmann <dv@vollmann.ch>
DOMAIN_TABLE is not used; in any case, it aliases to the kernel domain.
Remove this definition.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Keep the machine vectors in its own domain to avoid software based
user access control from making the vector code inaccessible, and
thereby deadlocking the machine.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Since we switched to early trap initialisation in 94e5a85b3be0
("ARM: earlier initialization of vectors page") we haven't been writing
directly to the vectors page, and so there's no need for this domain
to be in manager mode. Switch it to client mode.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Provide a macro to generate the mask for a domain, rather than using
domain_val(, DOMAIN_MANAGER) which won't work when CPU_USE_DOMAINS
is turned off.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Rather than modifying both the domain access control register and our
per-thread copy, modify only the domain access control register, and
use the per-thread copy to save and restore the register over context
switches. We can also avoid the explicit initialisation of the
init thread_info structure.
This allows us to avoid needing to gain access to the thread information
at the uaccess control sites.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Enable the GK20A GPU (via the Nouveau driver) and CPU frequency scaling
on Tegra124.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=xW1n
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.3-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/defconfig
ARM: tegra: Default configuration updates for v4.3-rc1
Enable the GK20A GPU (via the Nouveau driver) and CPU frequency scaling
on Tegra124.
* tag 'tegra-for-4.3-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Update multi_v7_defconfig
ARM: tegra: Update default configuration
Signed-off-by: Olof Johansson <olof@lixom.net>
This contains a bit more of Tegra210 support, which is shaping up pretty
nicely. Other than that there are a couple of cleanup patches here, too.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=xo46
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.3-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers
ARM: tegra: Core SoC changes for v4.3-rc1
This contains a bit more of Tegra210 support, which is shaping up pretty
nicely. Other than that there are a couple of cleanup patches here, too.
* tag 'tegra-for-4.3-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: cpuidle: implement cpuidle_state.enter_freeze()
ARM: tegra: Disable cpuidle if PSCI is available
soc/tegra: pmc: Use existing pclk reference
soc/tegra: pmc: Remove unnecessary return statement
soc: tegra: Remove redundant $(CONFIG_ARCH_TEGRA) in Makefile
soc/tegra: fuse: Add spare bit offset for Tegra210
soc/tegra: fuse: Add spare bit offset for Tegra124
soc/tegra: fuse: Add spare bit offset for Tegra114
soc/tegra: fuse: Rename core_* to soc_*
soc/tegra: fuse: Add Tegra210 support
soc/tegra: fuse: Unify Tegra20 and Tegra30 drivers
soc/tegra: fuse: Restrict legacy code to 32-bit ARM
soc/tegra: pmc: Add Tegra210 support
soc/tegra: pmc: Restrict legacy code to 32-bit ARM
soc/tegra: pmc: Avoid usage of uninitialized variable
soc/tegra: Add Tegra210 support
soc/tegra: Add Tegra132 support
Signed-off-by: Olof Johansson <olof@lixom.net>
- for exynos_defconfig
: enable SND_SOC_ODROIDX2 and SND_SIMPLE_CARD for
Odroid-XU3 to use max98090 audio codec
: enalbe SENSORS_NTC_THERMISTOR for Peach boards
: enable cpufreq-dt driver with ONDEMAND governor
for Exynos SoCs 3250, 4210, 4212, 4412 and 5250
- for multi_v7_defconfig:
: remove SAMSUNG_USB2PHY and SAMSUNG_USB3PHY are not used now
: enable SENSORS_NTC_THERMISTOR and EXYNOS_ADC for Peach boards
: enable REGULATOR_MAX77802 for Peach boards
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=0McP
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-new' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/late
Samsung defconfig updates for v4.3
- for exynos_defconfig
: enable SND_SOC_ODROIDX2 and SND_SIMPLE_CARD for
Odroid-XU3 to use max98090 audio codec
: enalbe SENSORS_NTC_THERMISTOR for Peach boards
: enable cpufreq-dt driver with ONDEMAND governor
for Exynos SoCs 3250, 4210, 4212, 4412 and 5250
- for multi_v7_defconfig:
: remove SAMSUNG_USB2PHY and SAMSUNG_USB3PHY are not used now
: enable SENSORS_NTC_THERMISTOR and EXYNOS_ADC for Peach boards
: enable REGULATOR_MAX77802 for Peach boards
* tag 'samsung-defconfig-new' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: exynos_defconfig: Enable cpufreq-dt driver
ARM: multi_v7_defconfig: Enable max77802 regulator
ARM: exynos_defconfig: Enable NTC Thermistors support
ARM: multi_v7_defconfig: Enable NTC Thermistors support
ARM: multi_v7_defconfig: Remove old Samsung USB PHY configs
ARM: exynos_defconfig: Enable CONFIG_SND_SOC_ODROIDX2 for Odroid-XU3
Signed-off-by: Olof Johansson <olof@lixom.net>
- add compatible string to exynos_cpufreq_matchs to switch for
supporting generic cpufreq driver for exynos3250, 4210, 4212
and 5250 SoCs in mach-exynos/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABAgAGBQJVzN/vAAoJEA0Cl+kVi2xqTzYP/1RNCO8Ph9f77fp44fcYypYF
echISQs18c5Gnm9U8AzBHr4S72ddNHUGInMQElGAkQoNbycCAO+i1ROBlTcpPEbt
zJY+U5bJXGu6MYbYajVBI738qWbRv2ftxWwQalxB+tZO8Iige0uBv6upRTu1dIwF
qb8wO0gY2t9wMlqymp2N5KjiNQIdMRrNTlDf4vVzqPMF1fZvUKNwnW5Pt7bE2bgv
NywX1RwK9RC+W43F+cHt1eczVH8r2HHlpaHzqfkh1PdzTMFNxBEOFVEC6dc25isT
XoLf/UITHSDXp9xMd5IFZtUNPLwBtmEZAPR6qx15sHI6Xu5dx1GCxUbkpP+F4Wzw
jlU2RG8/dsaSy0uJ6j+TLscno3g4SUpuQaPNJYngxDr531GACwy4JHl7jy2AJXg/
61Z8V82VOaEX5gEKg1AsYyM35ncUO/ZS84a9Dk7+h4kFCYaSg7JTGpaqjBf23lQl
SLAao/B2xrFX3Vlhsf+u2KaHK07V4O8iQsJkVPQ10xfHSxSzeAl943EfMWXCKZxm
ml3VPfDl/HurdBakBGTABZ7dgfZGqLX/kjBEe7g5gSZXwoek4KYu5wgJM4MkhgDU
BvzayuFNcKhV4LpUKRkrvEJPJgxRGNZswRdweGgd/tXWDGFeI5O/Q094yCAOx141
IRCXWBdKruIp8eukRV/u
=XGyP
-----END PGP SIGNATURE-----
Merge tag 'samsung-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/late
Samsung SoC updates for v4.3
- add compatible string to exynos_cpufreq_matchs to switch for
supporting generic cpufreq driver for exynos3250, 4210, 4212
and 5250 SoCs in mach-exynos/
* tag 'samsung-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: EXYNOS: switch to using generic cpufreq driver for exynos4x12
ARM: EXYNOS: Add exynos3250 compatible to use generic cpufreq driver
ARM: EXYNOS: switch to using generic cpufreq driver for exynos5250
Signed-off-by: Olof Johansson <olof@lixom.net>
- for exynos3250, 4212, 4412 and 5250
: add CPU OPP and regulator supply property
- for exynos3250
: add CPU cooling binding for exynos3250 boards
- for exynos4 SoCs
: add iommu property to JPEG device
- for exynos4412-odroidu3
: enable SPI1
- for exynos5250-snow
: add SPI CS
- for exynos5422
: add exynos5422-cpus.dtsi to correct cpu order
* Note this branch is depending on tags/samsung-clk-driver
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=MKr+
-----END PGP SIGNATURE-----
Merge tag 'samsung-late-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/late
Samsung 2nd DT updates for v4.3
- for exynos3250, 4212, 4412 and 5250
: add CPU OPP and regulator supply property
- for exynos3250
: add CPU cooling binding for exynos3250 boards
- for exynos4 SoCs
: add iommu property to JPEG device
- for exynos4412-odroidu3
: enable SPI1
- for exynos5250-snow
: add SPI CS
- for exynos5422
: add exynos5422-cpus.dtsi to correct cpu order
* Note this branch is depending on tags/samsung-clk-driver
* tag 'samsung-late-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (22 commits)
ARM: dts: add iommu property to JPEG device for exynos4
ARM: dts: enable SPI1 for exynos4412-odroidu3
ARM: dts: Add SPI CS on exynos5250-snow
ARM: dts: Add CPU cooling binding for exynos3250 boards
ARM: dts: add exynos5422-cpus.dtsi to correct cpu order
ARM: dts: add CPU OPP and regulator supply property for exynos4x12
ARM: dts: Add CPU OPP and regulator supply property for exynos3250
ARM: dts: add CPU OPP and regulator supply property for exynos5250
ARM: dts: Extend exynos5420-pinctrl nodes using labels instead of paths
ARM: dts: Include exynos5420-pinctrl after the nodes were defined for exynos5420
ARM: dts: Extend exynos5250-pinctrl nodes using labels instead of paths
ARM: dts: Include exynos5250-pinctrl after the nodes were defined for exynos5250
ARM: dts: Enable thermal-zones for exynos5422-odroidxu3
ARM: dts: Define default thermal-zones for exynos5422
ARM: dts: Enable TMU for exynos5422-odroidxu3
ARM: dts: Add pwm-fan node for exynos5422-odroidxu3
ARM: dts: Use labels for overriding nodes for exynos4210-universal_c210
ARM: dts: Set max17047 over heat and voltage thresholds for exynos4412-trats2
ARM: dts: Enable USB3 regulators for exynos5422-odroidxu3
ARM: dts: Clean up indentation for exynos5410-smdk5410
...
Signed-off-by: Olof Johansson <olof@lixom.net>
