IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Due to the initial confusion about MIPI_DSI_MODE_EOT_PACKET, properly
renamed to MIPI_DSI_MODE_NO_EOT_PACKET, reflecting its actual meaning,
both the DSI_TXRX_CON register setting for bit (HSTX_)DIS_EOT and the
later calculation for horizontal sync-active (HSA), back (HBP) and
front (HFP) porches got incorrect due to the logic being inverted.
This means that a number of settings were wrong because....:
- DSI_TXRX_CON register setting: bit (HSTX_)DIS_EOT should be
set in order to disable the End of Transmission packet;
- Horizontal Sync and Back/Front porches: The delta used to
calculate all of HSA, HBP and HFP should account for the
additional EOT packet.
Before this change...
- Bit (HSTX_)DIS_EOT was being set when EOT packet was enabled;
- For HSA/HBP/HFP delta... all three were wrong, as words were
added when EOT disabled, instead of when EOT packet enabled!
Invert the logic around flag MIPI_DSI_MODE_NO_EOT_PACKET in the
MediaTek DSI driver to fix the aforementioned issues.
Fixes: 8b2b99fd7931 ("drm/mediatek: dsi: Fine tune the line time caused by EOTp")
Fixes: c87d1c4b5b9a ("drm/mediatek: dsi: Use symbolized register definition")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Tested-by: Michael Walle <mwalle@kernel.org>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230523104234.7849-1-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Compress the entry for mediatek,mt8173-disp-aal, as it fits in one
line, and fix the style; while at it, also add the usual sentinel
comment to the last entry.
This commit brings no functional changes.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231012095736.100784-17-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
All of the SoCs that don't have dithering control in the gamma IP
have got a GAMMA_LUT_TYPE bit that tells to the IP if the LUT is
"descending" (bit set) or "rising" (bit cleared): make sure to set
it correctly after programming the LUT.
Reviewed-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231012095736.100784-14-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Disable relay mode at the end of LUT programming to make sure that the
processed image goes through in both DISP_GAMMA and DISP_AAL for gamma
setting.
Reviewed-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231012095736.100784-13-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
New SoCs, like MT8195, not only may support bigger lookup tables, but
have got a different register layout to support bigger precision:
support specifying the number of `lut_bits` for each SoC and use it
in mtk_gamma_set_common() to perform the right calculations and add
support for 12-bit gamma lookup tables.
While at it, also reorder the variables in mtk_gamma_set_common()
and rename `lut_base` to `lut0_base` to improve readability.
Reviewed-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231012095736.100784-11-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Newer Gamma IP have got multiple LUT banks: support specifying the
size of the LUT banks and handle bank-switching before programming
the LUT in mtk_gamma_set_common() in preparation for adding support
for MT8195 and newer SoCs.
Suggested-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
[Angelo: Refactored original commit]
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231012095736.100784-10-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
In preparation for adding a 12-bits gamma support for the DISP_GAMMA
IP, remove the mtk_gamma_set_common() function and move the relevant
bits in mtk_gamma_set() for DISP_GAMMA and mtk_aal_gamma_set() for
DISP_AAL: since the latter has no more support for gamma manipulation
(being moved to a different IP) in newer revisions, those functions
are about to diverge and it makes no sense to keep a common one (with
all the complications of passing common data and making exclusions
for device driver data) for just a few bits.
This commit brings no functional changes.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231012095736.100784-9-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Make the code more robust and improve readability by using bitfield
macros instead of open coding bit operations.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231012095736.100784-8-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Make the code more robust and improve readability by using bitfield
macros instead of open coding bit operations.
Reviewed-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231012095736.100784-7-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Move the write to DISP_GAMMA_CFG to enable the Gamma LUT to after
programming the actual table to avoid potential visual glitches during
table modification.
Note:
GAMMA should get enabled in between vblanks, but this requires many
efforts in order to make this happen, as that requires migrating all
of the writes to make use of CMDQ instead of cpu writes and that's
not trivial. For this reason, this patch only moves the LUT enable.
The CMDQ rework will come at a later time.
Reviewed-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231012095736.100784-6-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Use drm_color_lut_extract() to avoid open-coding the bits reduction
calculations for each color channel and use a struct drm_color_lut
to temporarily store the information instead of an array of u32.
Also, slightly improve the precision of the HW LUT calculation in the
LUT DIFF case by performing the subtractions on the 16-bits values and
doing the 10 bits conversion later.
Reviewed-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231012095736.100784-5-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Newer SoCs support a bigger Gamma LUT table: wire up a callback
to retrieve the correct LUT size for each different Gamma IP.
Co-developed-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
[Angelo: Rewritten commit message/description + porting]
Reviewed-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231012095736.100784-4-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Invert the check for state->gamma_lut and move it at the beginning
of the function to reduce indentation: this prepares the code for
keeping readability on later additions.
This commit brings no functional changes.
Reviewed-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231012095736.100784-3-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Adjust the parameters in mtk_drm_gamma_set_common()
- add (struct device *dev) to get lut_diff from gamma's driver data
- remove (bool lut_diff) and use false as default value in the function
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231012095736.100784-2-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
The difference between drm_atomic_helper_commit_tail() and
drm_atomic_helper_commit_tail_rpm() is
drm_atomic_helper_commit_tail() will commit plane first and
then enable crtc, drm_atomic_helper_commit_tail_rpm() will
enable crtc first and then commit plane.
Before mediatek-drm enables crtc, the power and clk required
by OVL have not been turned on, so the commit plane cannot be
committed before crtc is enabled. That means OVL layer should
not be enabled before crtc is enabled.
Therefore, the atomic_commit_tail of mediatek-drm is hooked with
drm_atomic_helper_commit_tail_rpm().
Another reason is that the plane_state of drm_atomic_state is not
synchronized with the plane_state stored in mtk_crtc during crtc enablng,
so just set all planes to disabled.
Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20230809125722.24112-3-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
According to the comment in drm_atomic_helper_async_commit(),
we should make sure FBs have been swapped, so that cleanups in the
new_state performs a cleanup in the old FB.
So we should move swapping FBs after calling mtk_plane_update_new_state(),
to avoid using the old FB which could be freed.
Fixes: 1a64a7aff8da ("drm/mediatek: Fix cursor plane no update")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20230809125722.24112-2-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Move DDP_COMPONENT_DP_INTF0 from mt8188_mtk_ddp_main
array to a connector routes array called
mt8188_mtk_ddp_main_routes and add DDP_COMPONENT_DSI0
to mt8188_mtk_ddp_main_routes to support dynamic
selection capability for mt8188.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nathan Lu <nathan.lu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Tested-by: Fei Shao <fshao@chromium.org>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231004024013.18956-8-jason-jh.lin@mediatek.com/
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231004024013.18956-10-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Add implementation of mtk_dsi_encoder_index to mtk_ddp_comp_func
to make mtk_dsi support dynamic connector selection.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Fei Shao <fshao@chromium.org>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231004024013.18956-9-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Add implementation of mtk_dpi_encoder_index to mtk_ddp_comp_func
to make mtk_dpi support dynamic connector selection.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231004024013.18956-7-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Add dynamic select available connector flow in mtk_drm_crtc_create()
and mtk_drm_crtc_atomic_enable().
In mtk_drm_crtc_create(), if there is a connector routes array in drm
driver data, all components definded in the connector routes array will
be checked and their encoder_index will be set.
In mtk_drm_crtc_atomic_enable(), crtc will check its encoder_index to
identify which componet in the connector routes array should append.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Signed-off-by: Nancy Lin <nancy.lin@mediatek.com>
Signed-off-by: Nathan Lu <nathan.lu@mediatek.com>
Tested-by: Fei Shao <fshao@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231004024013.18956-6-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
To support dynamic connector selection function, each ddp_comp need to
get their encoder_index to identify which connector should be selected.
Add encoder_index interface for mtk_ddp_comp_funcs to get the encoder
identifier by drm_encoder_index().
Then drm driver will call mtk_ddp_comp_encoder_index_set() to store the
encoder_index to each ddp_comp in connector routes.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231004024013.18956-5-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
According to mtk_drm_kms_init(), the all_drm_private array in each
drm private data stores all drm private data in display path order.
In mtk_drm_get_all_drm_priv(), each element in all_drm_priv should have one
display path private data, such as:
all_drm_priv[CRTC_MAIN] should only have main_path data
all_drm_priv[CRTC_EXT] should only have ext_path data
all_drm_priv[CRTC_THIRD] should only have third_path data
So we need to add the length checking for each display path before
assigning their drm private data into all_drm_priv array.
Then the all_drm_private array in each drm private data needs to be
assigned in their display path order.
Fixes: 1ef7ed48356c ("drm/mediatek: Modify mediatek-drm for mt8195 multi mmsys support")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: Fei Shao <fshao@chromium.org>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231004024013.18956-4-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Add mtk_drm_crtc_path enum for each display path.
Instead of using array index of all_drm_priv in mtk_drm_kms_init(),
mtk_drm_crtc_path enum can make code more readable.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Fei Shao <fshao@chromium.org>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231004024013.18956-3-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Add missing mmsys_dev_num to mt8188 vdosys0 driver data.
Fixes: 54b48080278a ("drm/mediatek: Add mediatek-drm of vdosys0 support for mt8188")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Tested-by: Fei Shao <fshao@chromium.org>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231004024013.18956-2-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Support IGT (Intel GPU Tools) in Mediatek DSI driver.
According to the description of MIPI Alliance Specification for D-PHY
Version 1.1, the maximum supported data rate is 1.5Gbps, so add mode_valid
callback to dsi bridge to filter out the data rate exceeding the
Specification.
Signed-off-by: Shuijing Li <shuijing.li@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230823092047.32258-1-shuijing.li@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
The audio packet arrangement function is to only arrange audio
packets into the Hblanking area. In order to align with the HW
default setting of mt8195, this function needs to be turned off.
Signed-off-by: Shuijing Li <shuijing.li@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230822024155.26670-3-shuijing.li@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Add dt-binding documentation of dp-tx for MediaTek MT8188 SoC.
Signed-off-by: Shuijing Li <shuijing.li@mediatek.com>
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230822024155.26670-2-shuijing.li@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
1. Instead of multiplying 2 variable of different types. Change to
assign a value of one variable and then multiply the other variable.
2. Add a int variable for multiplier calculation instead of calculating
different types multiplier with dma_addr_t variable directly.
Fixes: 1a64a7aff8da ("drm/mediatek: Fix cursor plane no update")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230907091425.9526-1-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
For mt8188, add dsi cmdq reg control to send long packets to panel
initialization. MT8188 hardware has been changed to automatically
set the cmdq_size value by default when sending long packets.
In this patch, the cmdq_size value is set manually instead.
Remain consistent with previous IC.
Signed-off-by: Shuijing Li <shuijing.li@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230911120800.17369-3-shuijing.li@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Add dt-binding documentation of dsi for MediaTek MT8188 SoC.
Signed-off-by: Shuijing Li <shuijing.li@mediatek.com>
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230911120800.17369-2-shuijing.li@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Add CI integration support files for drm subsystem to gitlab.freedesktop.org instance.
-----BEGIN PGP SIGNATURE-----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=X1RZ
-----END PGP SIGNATURE-----
Merge tag 'topic/drm-ci-2023-08-31-1' of git://anongit.freedesktop.org/drm/drm
Pull drm ci scripts from Dave Airlie:
"This is a bunch of ci integration for the freedesktop gitlab instance
where we currently do upstream userspace testing on diverse sets of
GPU hardware. From my perspective I think it's an experiment worth
going with and seeing how the benefits/noise playout keeping these
files useful.
Ideally I'd like to get this so we can do pre-merge testing on PRs
eventually.
Below is some info from danvet on why we've ended up making the
decision and how we can roll it back if we decide it was a bad plan.
Why in upstream?
- like documentation, testcases, tools CI integration is one of these
things where you can waste endless amounts of time if you
accidentally have a version that doesn't match your source code
- but also like the above, there's a balance, this is the initial cut
of what we think makes sense to keep in sync vs out-of-tree,
probably needs adjustment
- gitlab supports out-of-repo gitlab integration and that's what's
been used for the kernel in drm, but it results in per-driver
fragmentation and lots of duplicated effort. the simple act of
smashing an arbitrary winner into a topic branch already started
surfacing patches on dri-devel and sparking good cross driver team
discussions
Why gitlab?
- it's not any more shit than any of the other CI
- drm userspace uses it extensively for everything in userspace, we
have a lot of people and experience with this, including
integration of hw testing labs
- media userspace like gstreamer is also on gitlab.fd.o, and there's
discussion to extend this to the media subsystem in some fashion
Can this be shared?
- there's definitely a pile of code that could move to scripts/ if
other subsystem adopt ci integration in upstream kernel git. other
bits are more drm/gpu specific like the igt-gpu-tests/tools
integration
- docker images can be run locally or in other CI runners
Will we regret this?
- it's all in one directory, intentionally, for easy deletion
- probably 1-2 years in upstream to see whether this is worth it or a
Big Mistake. that's roughly what it took to _really_ roll out solid
CI in the bigger userspace projects we have on gitlab.fd.o like
mesa3d"
* tag 'topic/drm-ci-2023-08-31-1' of git://anongit.freedesktop.org/drm/drm:
drm: ci: docs: fix build warning - add missing escape
drm: Add initial ci/ subdirectory
fix a ld.lld linker (in)compatibility quirk and make the x86 SMP init code a bit
more conservative to fix kexec() lockups.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=S38E
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Fix preemption delays in the SGX code, remove unnecessarily
UAPI-exported code, fix a ld.lld linker (in)compatibility quirk and
make the x86 SMP init code a bit more conservative to fix kexec()
lockups"
* tag 'x86-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Break up long non-preemptible delays in sgx_vepc_release()
x86: Remove the arch_calc_vm_prot_bits() macro from the UAPI
x86/build: Fix linker fill bytes quirk/incompatibility for ld.lld
x86/smp: Don't send INIT to non-present and non-booted CPUs
affecting certain Intel systems.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Zq1S
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf event fix from Ingo Molnar:
"Work around a firmware bug in the uncore PMU driver, affecting certain
Intel systems"
* tag 'perf-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/uncore: Correct the number of CHAs on EMR
perf tools maintainership:
- Add git information for perf-tools and perf-tools-next trees/branches to the
MAINTAINERS file. That is where development now takes place and myself and
Namhyung Kim have write access, more people to come as we emulate other
maintainer groups.
perf record:
- Record kernel data maps when 'perf record --data' is used, so that global variables can
be resolved and used in tools that do data profiling.
perf trace:
- Remove the old, experimental support for BPF events in which a .c file was passed as
an event: "perf trace -e hello.c" to then get compiled and loaded.
The only known usage for that, that shipped with the kernel as an example for such events,
augmented the raw_syscalls tracepoints and was converted to a libbpf skeleton, reusing all
the user space components and the BPF code connected to the syscalls.
In the end just the way to glue the BPF part and the user space type beautifiers changed,
now being performed by libbpf skeletons.
The next step is to use BTF to do pretty printing of all syscall types, as discussed with
Alan Maguire and others.
Now, on a perf built with BUILD_BPF_SKEL=1 we get most if not all path/filenames/strings,
some of the networking data structures, perf_event_attr, etc, i.e. systemwide tracing of
nanosleep calls and perf_event_open syscalls while 'perf stat' runs 'sleep' for 5 seconds:
# perf trace -a -e *nanosleep,perf* perf stat -e cycles,instructions sleep 5
0.000 ( 9.034 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0 (PERF_COUNT_HW_CPU_CYCLES), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 3
9.039 ( 0.006 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0x1 (PERF_COUNT_HW_INSTRUCTIONS), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf-exec), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
? ( ): gpm/991 ... [continued]: clock_nanosleep()) = 0
10.133 ( ): sleep/327642 clock_nanosleep(rqtp: { .tv_sec: 5, .tv_nsec: 0 }, rmtp: 0x7ffd36f83ed0) ...
? ( ): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
30.276 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
223.215 (1000.430 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
30.276 (2000.394 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0
1230.814 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
1230.814 (1000.404 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
2030.886 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
2237.709 (1000.153 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
? ( ): crond/1172 ... [continued]: clock_nanosleep()) = 0
3242.699 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
2030.886 (2000.385 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0
3728.078 ( ): crond/1172 clock_nanosleep(rqtp: { .tv_sec: 60, .tv_nsec: 0 }, rmtp: 0x7ffe0971dcf0) ...
3242.699 (1000.158 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
4031.409 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
10.133 (5000.375 ms): sleep/327642 ... [continued]: clock_nanosleep()) = 0
Performance counter stats for 'sleep 5':
2,617,347 cycles
1,855,997 instructions # 0.71 insn per cycle
5.002282128 seconds time elapsed
0.000855000 seconds user
0.000852000 seconds sys
#
perf annotate:
- Building with binutils' libopcode now is opt-in (BUILD_NONDISTRO=1) for
licensing reasons, and we missed a build test on tools/perf/tests makefile.
Since we now default to NDEBUG=1, we ended up segfaulting when building with
BUILD_NONDISTRO=1 because a needed initialization routine was being "error
checked" via an assert.
Fix it by explicitly checking the result and aborting instead if it fails.
We better back propagate the error, but at least 'perf annotate' on samples
collected for a BPF program is back working when perf is built with
BUILD_NONDISTRO=1.
perf report/top:
- Add back TUI hierarchy mode header, that is seen when using 'perf report/top --hierarchy'.
- Fix the number of entries for 'e' key in the TUI that was preventing navigation of
lines when expanding an entry.
perf report/script:
- Support cross platform register handling, allowing a perf.data file collected
on one architecture to have registers sampled correctly displayed when
analysis tools such as 'perf report' and 'perf script' are used on a different
architecture.
- Fix handling of event attributes in pipe mode, i.e. when one uses:
perf record -o - | perf report -i -
When no perf.data files are used.
- Handle files generated via pipe mode with a version of perf and then read
also via pipe mode with a different version of perf, where the event attr
record may have changed, use the record size field to properly support this
version mismatch.
perf probe:
- Accessing global variables from uprobes isn't supported, make the error
message state that instead of stating that some minimal kernel version is
needed to have that feature. This seems just a tool limitation, the kernel
probably has all that is needed.
perf tests:
- Fix a reference count related leak in the dlfilter v0 API where the result
of a thread__find_symbol_fb() is not matched with an addr_location__exit()
to drop the reference counts of the resolved components (machine, thread, map,
symbol, etc). Add a dlfilter test to make sure that doesn't regresses.
- Lots of fixes for the 'perf test' written in shell script related to problems
found with the shellcheck utility.
- Fixes for 'perf test' shell scripts testing features enabled when perf is
built with BUILD_BPF_SKEL=1, such as 'perf stat' bpf counters.
- Add perf record sample filtering test, things like the following example, that gets
implemented as a BPF filter attached to the event:
# perf record -e task-clock -c 10000 --filter 'ip < 0xffffffff00000000'
- Improve the way the task_analyzer test checks if libtraceevent is linked,
using 'perf version --build-options' instead of the more expensinve
'perf record -e "sched:sched_switch"'.
- Add support for riscv in the mmap-basic test. (This went as well via the RiscV tree, same contents).
libperf:
- Implement riscv mmap support (This went as well via the RiscV tree, same contents).
perf script:
- New tool that converts perf.data files to the firefox profiler format so that one can use
the visualizer at https://profiler.firefox.com/. Done by Anup Sharma as part of this year's
Google Summer of Code.
One can generate the output and upload it to the web interface but Anup also automated
everything:
perf script gecko -F 99 -a sleep 60
- Support syscall name parsing on arm64.
- Print "cgroup" field on the same line as "comm".
perf bench:
- Add new 'uprobe' benchmark to measure the overhead of uprobes with/without
BPF programs attached to it.
- breakpoints are not available on power9, skip that test.
perf stat:
- Add #num_cpus_online literal to be used in 'perf stat' metrics, and add this extra
'perf test' check that exemplifies its purpose:
TEST_ASSERT_VAL("#num_cpus_online",
expr__parse(&num_cpus_online, ctx, "#num_cpus_online") == 0);
TEST_ASSERT_VAL("#num_cpus", expr__parse(&num_cpus, ctx, "#num_cpus") == 0);
TEST_ASSERT_VAL("#num_cpus >= #num_cpus_online", num_cpus >= num_cpus_online);
Miscellaneous:
- Improve tool startup time by lazily reading PMU, JSON, sysfs data.
- Improve error reporting in the parsing of events, passing YYLTYPE to error routines,
so that the output can show were the parsing error was found.
- Add 'perf test' entries to check the parsing of events improvements.
- Fix various leak for things detected by -fsanitize=address, mostly things that would
be freed at tool exit, including:
- Free evsel->filter on the destructor.
- Allow tools to register a thread->priv destructor and use it in 'perf trace'.
- Free evsel->priv in 'perf trace'.
- Free string returned by synthesize_perf_probe_point() when the caller fails
to do all it needs.
- Adjust various compiler options to not consider errors some warnings when
building with broken headers found in things like python, flex, bison, as we
otherwise build with -Werror. Some for gcc, some for clang, some for some
specific version of those, some for some specific version of flex or bison, or
some specific combination of these components, bah.
- Allow customization of clang options for BPF target, this helps building on
gentoo where there are other oddities where BPF targets gets passed some compiler
options intended for the native build, so building with WERROR=0 helps while
these oddities are fixed.
- Dont pass ERR_PTR() values to perf_session__delete() in 'perf top' and 'perf lock',
fixing some segfaults when handling some odd failures.
- Add LTO build option.
- Fix format of unordered lists in the perf docs (tools/perf/Documentation).
- Overhaul the bison files, using constructs such as YYNOMEM.
- Remove unused tokens from the bison .y files.
- Add more comments to various structs.
- A few LoongArch enablement patches.
Vendor events (JSON):
- Add JSON metrics for Yitian 710 DDR (aarch64). Things like:
EventName, BriefDescription
visible_window_limit_reached_rd, "At least one entry in read queue reaches the visible window limit.",
visible_window_limit_reached_wr, "At least one entry in write queue reaches the visible window limit.",
op_is_dqsosc_mpc , "A DQS Oscillator MPC command to DRAM.",
op_is_dqsosc_mrr , "A DQS Oscillator MRR command to DRAM.",
op_is_tcr_mrr , "A Temperature Compensated Refresh(TCR) MRR command to DRAM.",
- Add AmpereOne metrics (aarch64).
- Update N2 and V2 metrics (aarch64) and events using Arm telemetry repo.
- Update scale units and descriptions of common topdown metrics on aarch64. Things like:
- "MetricExpr": "stall_slot_frontend / (#slots * cpu_cycles)",
- "BriefDescription": "Frontend bound L1 topdown metric",
+ "MetricExpr": "100 * (stall_slot_frontend / (#slots * cpu_cycles))",
+ "BriefDescription": "This metric is the percentage of total slots that were stalled due to resource constraints in the frontend of the processor.",
- Update events for intel: meteorlake to 1.04, sapphirerapids to 1.15, Icelake+ metric constraints.
- Update files for the power10 platform.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZPfJZgAKCRCyPKLppCJ+
J1/eAP9lgtavD0V75wy1p5zyotkceOmPTkk1DYFVx2Euhxa/lAD/YW/JvuVSo0Gr
HqJP52XaV0tF8gG+YxL+Lay/Ke0P5AQ=
=d12c
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Arnaldo Carvalho de Melo:
"perf tools maintainership:
- Add git information for perf-tools and perf-tools-next trees and
branches to the MAINTAINERS file. That is where development now
takes place and myself and Namhyung Kim have write access, more
people to come as we emulate other maintainer groups.
perf record:
- Record kernel data maps when 'perf record --data' is used, so that
global variables can be resolved and used in tools that do data
profiling.
perf trace:
- Remove the old, experimental support for BPF events in which a .c
file was passed as an event: "perf trace -e hello.c" to then get
compiled and loaded.
The only known usage for that, that shipped with the kernel as an
example for such events, augmented the raw_syscalls tracepoints and
was converted to a libbpf skeleton, reusing all the user space
components and the BPF code connected to the syscalls.
In the end just the way to glue the BPF part and the user space
type beautifiers changed, now being performed by libbpf skeletons.
The next step is to use BTF to do pretty printing of all syscall
types, as discussed with Alan Maguire and others.
Now, on a perf built with BUILD_BPF_SKEL=1 we get most if not all
path/filenames/strings, some of the networking data structures,
perf_event_attr, etc, i.e. systemwide tracing of nanosleep calls
and perf_event_open syscalls while 'perf stat' runs 'sleep' for 5
seconds:
# perf trace -a -e *nanosleep,perf* perf stat -e cycles,instructions sleep 5
0.000 ( 9.034 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0 (PERF_COUNT_HW_CPU_CYCLES), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 3
9.039 ( 0.006 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0x1 (PERF_COUNT_HW_INSTRUCTIONS), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf-exec), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
? ( ): gpm/991 ... [continued]: clock_nanosleep()) = 0
10.133 ( ): sleep/327642 clock_nanosleep(rqtp: { .tv_sec: 5, .tv_nsec: 0 }, rmtp: 0x7ffd36f83ed0) ...
? ( ): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
30.276 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
223.215 (1000.430 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
30.276 (2000.394 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0
1230.814 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
1230.814 (1000.404 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
2030.886 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
2237.709 (1000.153 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
? ( ): crond/1172 ... [continued]: clock_nanosleep()) = 0
3242.699 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
2030.886 (2000.385 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0
3728.078 ( ): crond/1172 clock_nanosleep(rqtp: { .tv_sec: 60, .tv_nsec: 0 }, rmtp: 0x7ffe0971dcf0) ...
3242.699 (1000.158 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
4031.409 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
10.133 (5000.375 ms): sleep/327642 ... [continued]: clock_nanosleep()) = 0
Performance counter stats for 'sleep 5':
2,617,347 cycles
1,855,997 instructions # 0.71 insn per cycle
5.002282128 seconds time elapsed
0.000855000 seconds user
0.000852000 seconds sys
perf annotate:
- Building with binutils' libopcode now is opt-in (BUILD_NONDISTRO=1)
for licensing reasons, and we missed a build test on
tools/perf/tests makefile.
Since we now default to NDEBUG=1, we ended up segfaulting when
building with BUILD_NONDISTRO=1 because a needed initialization
routine was being "error checked" via an assert.
Fix it by explicitly checking the result and aborting instead if it
fails.
We better back propagate the error, but at least 'perf annotate' on
samples collected for a BPF program is back working when perf is
built with BUILD_NONDISTRO=1.
perf report/top:
- Add back TUI hierarchy mode header, that is seen when using 'perf
report/top --hierarchy'.
- Fix the number of entries for 'e' key in the TUI that was
preventing navigation of lines when expanding an entry.
perf report/script:
- Support cross platform register handling, allowing a perf.data file
collected on one architecture to have registers sampled correctly
displayed when analysis tools such as 'perf report' and 'perf
script' are used on a different architecture.
- Fix handling of event attributes in pipe mode, i.e. when one uses:
perf record -o - | perf report -i -
When no perf.data files are used.
- Handle files generated via pipe mode with a version of perf and
then read also via pipe mode with a different version of perf,
where the event attr record may have changed, use the record size
field to properly support this version mismatch.
perf probe:
- Accessing global variables from uprobes isn't supported, make the
error message state that instead of stating that some minimal
kernel version is needed to have that feature. This seems just a
tool limitation, the kernel probably has all that is needed.
perf tests:
- Fix a reference count related leak in the dlfilter v0 API where the
result of a thread__find_symbol_fb() is not matched with an
addr_location__exit() to drop the reference counts of the resolved
components (machine, thread, map, symbol, etc). Add a dlfilter test
to make sure that doesn't regresses.
- Lots of fixes for the 'perf test' written in shell script related
to problems found with the shellcheck utility.
- Fixes for 'perf test' shell scripts testing features enabled when
perf is built with BUILD_BPF_SKEL=1, such as 'perf stat' bpf
counters.
- Add perf record sample filtering test, things like the following
example, that gets implemented as a BPF filter attached to the
event:
# perf record -e task-clock -c 10000 --filter 'ip < 0xffffffff00000000'
- Improve the way the task_analyzer test checks if libtraceevent is
linked, using 'perf version --build-options' instead of the more
expensinve 'perf record -e "sched:sched_switch"'.
- Add support for riscv in the mmap-basic test. (This went as well
via the RiscV tree, same contents).
libperf:
- Implement riscv mmap support (This went as well via the RiscV tree,
same contents).
perf script:
- New tool that converts perf.data files to the firefox profiler
format so that one can use the visualizer at
https://profiler.firefox.com/. Done by Anup Sharma as part of this
year's Google Summer of Code.
One can generate the output and upload it to the web interface but
Anup also automated everything:
perf script gecko -F 99 -a sleep 60
- Support syscall name parsing on arm64.
- Print "cgroup" field on the same line as "comm".
perf bench:
- Add new 'uprobe' benchmark to measure the overhead of uprobes
with/without BPF programs attached to it.
- breakpoints are not available on power9, skip that test.
perf stat:
- Add #num_cpus_online literal to be used in 'perf stat' metrics, and
add this extra 'perf test' check that exemplifies its purpose:
TEST_ASSERT_VAL("#num_cpus_online",
expr__parse(&num_cpus_online, ctx, "#num_cpus_online") == 0);
TEST_ASSERT_VAL("#num_cpus", expr__parse(&num_cpus, ctx, "#num_cpus") == 0);
TEST_ASSERT_VAL("#num_cpus >= #num_cpus_online", num_cpus >= num_cpus_online);
Miscellaneous:
- Improve tool startup time by lazily reading PMU, JSON, sysfs data.
- Improve error reporting in the parsing of events, passing YYLTYPE
to error routines, so that the output can show were the parsing
error was found.
- Add 'perf test' entries to check the parsing of events
improvements.
- Fix various leak for things detected by -fsanitize=address, mostly
things that would be freed at tool exit, including:
- Free evsel->filter on the destructor.
- Allow tools to register a thread->priv destructor and use it in
'perf trace'.
- Free evsel->priv in 'perf trace'.
- Free string returned by synthesize_perf_probe_point() when the
caller fails to do all it needs.
- Adjust various compiler options to not consider errors some
warnings when building with broken headers found in things like
python, flex, bison, as we otherwise build with -Werror. Some for
gcc, some for clang, some for some specific version of those, some
for some specific version of flex or bison, or some specific
combination of these components, bah.
- Allow customization of clang options for BPF target, this helps
building on gentoo where there are other oddities where BPF targets
gets passed some compiler options intended for the native build, so
building with WERROR=0 helps while these oddities are fixed.
- Dont pass ERR_PTR() values to perf_session__delete() in 'perf top'
and 'perf lock', fixing some segfaults when handling some odd
failures.
- Add LTO build option.
- Fix format of unordered lists in the perf docs
(tools/perf/Documentation)
- Overhaul the bison files, using constructs such as YYNOMEM.
- Remove unused tokens from the bison .y files.
- Add more comments to various structs.
- A few LoongArch enablement patches.
Vendor events (JSON):
- Add JSON metrics for Yitian 710 DDR (aarch64). Things like:
EventName, BriefDescription
visible_window_limit_reached_rd, "At least one entry in read queue reaches the visible window limit.",
visible_window_limit_reached_wr, "At least one entry in write queue reaches the visible window limit.",
op_is_dqsosc_mpc , "A DQS Oscillator MPC command to DRAM.",
op_is_dqsosc_mrr , "A DQS Oscillator MRR command to DRAM.",
op_is_tcr_mrr , "A Temperature Compensated Refresh(TCR) MRR command to DRAM.",
- Add AmpereOne metrics (aarch64).
- Update N2 and V2 metrics (aarch64) and events using Arm telemetry
repo.
- Update scale units and descriptions of common topdown metrics on
aarch64. Things like:
- "MetricExpr": "stall_slot_frontend / (#slots * cpu_cycles)",
- "BriefDescription": "Frontend bound L1 topdown metric",
+ "MetricExpr": "100 * (stall_slot_frontend / (#slots * cpu_cycles))",
+ "BriefDescription": "This metric is the percentage of total slots that were stalled due to resource constraints in the frontend of the processor.",
- Update events for intel: meteorlake to 1.04, sapphirerapids to
1.15, Icelake+ metric constraints.
- Update files for the power10 platform"
* tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (217 commits)
perf parse-events: Fix driver config term
perf parse-events: Fixes relating to no_value terms
perf parse-events: Fix propagation of term's no_value when cloning
perf parse-events: Name the two term enums
perf list: Don't print Unit for "default_core"
perf vendor events intel: Fix modifier in tma_info_system_mem_parallel_reads for skylake
perf dlfilter: Avoid leak in v0 API test use of resolve_address()
perf metric: Add #num_cpus_online literal
perf pmu: Remove str from perf_pmu_alias
perf parse-events: Make common term list to strbuf helper
perf parse-events: Minor help message improvements
perf pmu: Avoid uninitialized use of alias->str
perf jevents: Use "default_core" for events with no Unit
perf test stat_bpf_counters_cgrp: Enhance perf stat cgroup BPF counter test
perf test shell stat_bpf_counters: Fix test on Intel
perf test shell record_bpf_filter: Skip 6.2 kernel
libperf: Get rid of attr.id field
perf tools: Convert to perf_record_header_attr_id()
libperf: Add perf_record_header_attr_id()
perf tools: Handle old data in PERF_RECORD_ATTR
...
-----BEGIN PGP SIGNATURE-----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=6QhY
-----END PGP SIGNATURE-----
Merge tag '6.6-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- six smb3 client fixes including ones to allow controlling smb3
directory caching timeout and limits, and one debugging improvement
- one fix for nls Kconfig (don't need to expose NLS_UCS2_UTILS option)
- one minor spnego registry update
* tag '6.6-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
spnego: add missing OID to oid registry
smb3: fix minor typo in SMB2_GLOBAL_CAP_LARGE_MTU
cifs: update internal module version number for cifs.ko
smb3: allow controlling maximum number of cached directories
smb3: add trace point for queryfs (statfs)
nls: Hide new NLS_UCS2_UTILS
smb3: allow controlling length of time directory entries are cached with dir leases
smb: propagate error code of extract_sharename()
Add some kunit tests for page extraction for ITER_BVEC, ITER_KVEC and
ITER_XARRAY type iterators. ITER_UBUF and ITER_IOVEC aren't dealt with
as they require userspace VM interaction. ITER_DISCARD isn't dealt with
either as that can't be extracted.
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add some kunit tests for page extraction for ITER_BVEC, ITER_KVEC and
ITER_XARRAY type iterators. ITER_UBUF and ITER_IOVEC aren't dealt with
as they require userspace VM interaction. ITER_DISCARD isn't dealt with
either as that does nothing.
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
iov_iter_extract_pages() doesn't correctly handle skipping over initial
zero-length entries in ITER_KVEC and ITER_BVEC-type iterators.
The problem is that it accidentally reduces maxsize to 0 when it
skipping and thus runs to the end of the array and returns 0.
Fix this by sticking the calculated size-to-copy in a new variable
rather than back in maxsize.
Fixes: 7d58fe731028 ("iov_iter: Add a function to extract a page list from an iterator")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- sh: push-switch: Reorder cleanup operations to avoid use-after-free bug
- sh: boards: Fix CEU buffer size passed to dma_declare_coherent_memory()
-----BEGIN PGP SIGNATURE-----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=sNwf
-----END PGP SIGNATURE-----
Merge tag 'sh-for-v6.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from Adrian Glaubitz:
- Fix a use-after-free bug in the push-switch driver (Duoming Zhou)
- Fix calls to dma_declare_coherent_memory() that incorrectly passed
the buffer end address instead of the buffer size as the size
parameter
* tag 'sh-for-v6.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: push-switch: Reorder cleanup operations to avoid use-after-free bug
sh: boards: Fix CEU buffer size passed to dma_declare_coherent_memory()
* The kernel now dynamically probes for misaligned access speed, as
opposed to relying on a table of known implementations.
* Support for non-coherent devices on systems using the Andes AX45MP
core, including the RZ/Five SoCs.
* Support for the V extension in ptrace(), again.
* Support for KASLR.
* Support for the BPF prog pack allocator in RISC-V.
* A handful of bug fixes and cleanups.
-----BEGIN PGP SIGNATURE-----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=s89m
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.6-mw2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- The kernel now dynamically probes for misaligned access speed, as
opposed to relying on a table of known implementations.
- Support for non-coherent devices on systems using the Andes AX45MP
core, including the RZ/Five SoCs.
- Support for the V extension in ptrace(), again.
- Support for KASLR.
- Support for the BPF prog pack allocator in RISC-V.
- A handful of bug fixes and cleanups.
* tag 'riscv-for-linus-6.6-mw2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (25 commits)
soc: renesas: Kconfig: For ARCH_R9A07G043 select the required configs if dependencies are met
riscv: Kconfig.errata: Add dependency for RISCV_SBI in ERRATA_ANDES config
riscv: Kconfig.errata: Drop dependency for MMU in ERRATA_ANDES_CMO config
riscv: Kconfig: Select DMA_DIRECT_REMAP only if MMU is enabled
bpf, riscv: use prog pack allocator in the BPF JIT
riscv: implement a memset like function for text
riscv: extend patch_text_nosync() for multiple pages
bpf: make bpf_prog_pack allocator portable
riscv: libstub: Implement KASLR by using generic functions
libstub: Fix compilation warning for rv32
arm64: libstub: Move KASLR handling functions to kaslr.c
riscv: Dump out kernel offset information on panic
riscv: Introduce virtual kernel mapping KASLR
RISC-V: Add ptrace support for vectors
soc: renesas: Kconfig: Select the required configs for RZ/Five SoC
cache: Add L2 cache management for Andes AX45MP RISC-V core
dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller
riscv: mm: dma-noncoherent: nonstandard cache operations support
riscv: errata: Add Andes alternative ports
riscv: asm: vendorid_list: Add Andes Technology to the vendors list
...
The original code puts flush_work() before timer_shutdown_sync()
in switch_drv_remove(). Although we use flush_work() to stop
the worker, it could be rescheduled in switch_timer(). As a result,
a use-after-free bug can occur. The details are shown below:
(cpu 0) | (cpu 1)
switch_drv_remove() |
flush_work() |
... | switch_timer // timer
| schedule_work(&psw->work)
timer_shutdown_sync() |
... | switch_work_handler // worker
kfree(psw) // free |
| psw->state = 0 // use
This patch puts timer_shutdown_sync() before flush_work() to
mitigate the bugs. As a result, the worker and timer will be
stopped safely before the deallocate operations.
Fixes: 9f5e8eee5cfe ("sh: generic push-switch framework.")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20230802033737.9738-1-duoming@zju.edu.cn
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
